Assembly Instructions

Mobile Laptop Computer Tables

www.smartdesks.com800 770 7042

© 2009 CBT Supply, Inc. dba SMARTdesks. All rights reserved. Quark™ Qstar™ and flipIT® are trademarks of CBT Supply, Inc. flipIT® Laptop Safe Patent Pending.

Tools Required

• Phillips#2Drive• 3/8”HexDrive(optional)• MeasuringTape• BoxCutter• SafetyGlasses

POWER TOOLS ARE DANGEROUS.Reviewthesafetyproceduressuppliedbyyourpowertools’manufacturers.Heedallwarningsforyoursafety’ssake.Alwaysusesafetyglassesandwearproperapparelthatwon’tgetcaughtinmovingparts.CBTSupply,Inc.willnotbeheldliableformisuseoftoolsanddisregardforpowertoolmanufacturer’ssafetyprecautions.

Parts

EnclosedwiththemetalQuark™adjustableheightpedestalboxaretwobagsof8hex/Phillipsdrivemachineboltsand2woodscrews,each.Thehex/Phillipsdriveboltsareforattachingthetopandbottomtothepedestal.Thewoodscrewsareforattachingthesidepanels.

2

Parts and Assemblies

Pedestal Assembly

Side Panels (2)

WireWonder™ Cable Manager

Bottom Plate Top

flipIT® Laptop Safe

Casters: 3 locking, 2 non-locking

The flipIT® Laptop Safe includes a lock assembly with separate installation instructions.

3

Getting Started

Forreference,thecomplet-edQuark™MobileLaptopTablelookslikethis.

Theassemblyareashouldhaveprotectivesurfaceswithoutabrasiveobjectsthatcouldscratchthesurfaces.Keepallsurfacesfreeofsmallmetalscrewsandpartsthatcouldcausedamage.

Install WireWonder™ Cable Manager

TheWireWonder™CableManagerispackagedseparatelywithitsownsetofhex/Phillipsdriveboltsandoptionalwoodscrews.Usethe3hex/Phillipsdriveboltstoinstallintothetappedinsertsprovided.

Anextensionmayberequiredtoinstall.LargeholesinthebottomoftheWireWonder™areprovidedforaccesstotheinstallationbolts.

4

Place Pedestal Assembly on Quark™ Top

Thepedestalcomespre-assembled.Notethepositionofthewiremanage-mentchannelandhalf-mooncutthroughthebottomplate.Makesuretopositionthewiremanagementchanneltothefrontofthetop,soitisonthesamesideastheWireWonder™CableManager.

Theheightadjustmentleverwillbeorientedtotheusersideofthetopwiththelargeconcavecontourandhandles.

Installwitheighthex/Phil-lipsdrivebolts.

5

Install Side Panels

Eachsidepanelhas4pilotholesprovided.Alignthemwiththe4holelocationsonthepedestal.Installusing2woodscrewsforeachpanel,usingadiagonalpatternoftheupperandlowerlocations.

Removethe3hex/Phillipsdriveboltsthatattachthebottomplatetothepedestalassembly.Keeptheboltsreadyforreattachmentafterthebaseplatehasbeeninstalled.

Placethebaseplateonaclean,protectiveworksurface.

Alignthepedestalbaseplatewiththeboltinserts.Notethepositionofthehalf-mooncutoutthatalignswiththewiremanagementchannel.

6

Bolt the bottom plates together

Starttheboltsbyhandandtorquetheminsecurelywithapowerdriver.

Bolt the bottom plate assembly to the pedestal.

Usethe3hex/Phillipsdriveboltsyouremovedear-lier.Startallthreeboltsbyhandandtorquethemdownwithapowerdriverorhandwrench.

7

Install Casters

PositiontheLockingcastersrightandleftontheusersideandoneonpointinthemiddleoftheconvexside.Positionthetwonon-lockingcastersonthemiddlesideposi-tions.

InstallwithPhillipsdrivescrewspackagedwiththecasters.Pilotholesareprovided.

Install flipIT® Laptop Safe

Keepthelaptopsafeclosed.Thepneumaticcylinderwilldanglefreely.Thisisnormal.

Takeadiagonalapproachtogettingtheassemblythroughthecutout.

Asthepneumaticcylindercontactsthepedestalcrossbar,makesureitstaysontopofthebaranddoesnotgettrappedbelowthebar.Itwillneedtobebroughtupintopositiontoattachtotheas-sembly.

8

Watch your fingers!

Astheunitdropsintoplace,getyourfingersoutoftheway.Thismethodletsyouavoidopeningthelaptopsafeunsup-ported.

Another way:

Thelidisclosedwithatouchlatch.Pressthelatchtogetheranditwillrelease.Graspthewoodenlidandletthelaptopsafecomeopentothispoint.Keepthetrayunretracted.

Nowyoucangettheunitseatedwithouthavingfingersinthegap.

Open Laptop Safe to install collar screws

Thepneumaticcylindernormallygivesopeningforce,butithasnotbeenattachedyet.Toopenthelaptopsafe,pressonthelidtoreleasethetouchlatch.Holdthelidopentorevealthepull-outtray.Graspthetraymarked“PULL,”andpullittowardyourselfasyouraisethelid.Thetrayandlidmoveatthesametime.

9

Install Collar with 4 Screws

BEFORE you install, make sure the pneu-matic cylinder is above the pedestal cross bar so it can be pulled up into po-sition and installedonitspostinthesideofthecollar.

The reason the pneumatic is not shipped installed is to reduce the possibility for the collar to be-come sprung in shipment or during the installation process. If you must remove the collar at any time, take the pneumatic off its post before removing the collar screws.

The locking hub must be pried off before attempt-ing to press the end onto the post. The locking hub must be removed before removal, as well. When installed, press the locking hub back into place.

1

2

3

4

Install pneumatic after installing the collar

10

Install the Pneumatic

Removethelockinghub,presstheendontothepost,replacethelockinghubandpressintoplace.

Install the Lock Assembly

TheLockAssemblyhasitsowninstallationkit,hardwareandinstallationmanual.Abriefisprovidedhere.

Pleaseconsultthemanualthatcomeswiththekitforfulldetails.Thelockdesignhaschangedovertime,andmaychangeagain.Themanualthatcomeswiththelockkitwillbespecificforthatlockkit.

11

Position the Lock Assembly

PlaceQuarkupsidedownonaworksurface.Placethelockassemblyasshown.The“dog-bone”slidesalongtheflatsectionofthelockbarsoitcanbepositionedtogointotheslotinthesideoftheflipIT®LaptopSafe.Thelockisparallelwiththeunitandinstallsontheuser’sleft.Thecowlfitsoverthelockassemblytopreventtamperingwiththelock.

Locate “dogbone,” drill 1/8” pilot holes and install with kit wood screws.

Do the same for the Key Lock. Use Phillips drive screws to confirm operation. Install One-Ways one at a time for PERMANENT installation.

“Dogbone” on adjustable flat of lock bar.

Parallel Alignment

One Way Screws are PERMANENT. InstallONLYafterthelockassemblyoperatesperfectlywithPhillipsDriveScrews.ReplaceonescrewatatimewithOne-Wayssothepositionofthecomponentsremainsunchanged.

www.smartdesks.com800 770 7042

© 2009 CBT Supply, Inc. dba SMARTdesks. All rights reserved. Quark™ Qstar™ and flipIT® are trademarks of CBT Supply, Inc. flipIT® Laptop Safe Patent Pending.