assessment of direct shear behavior in normal · pdf fileo post-test analysis o propose...
TRANSCRIPT
Introduction and ObjectivesThe focus of this study was to characterize the direct shear behavior of normal strength concrete (NSC), Cor-Tuf1 and Cor-Tuf2 ultra-high performance concretes (UHPC) under static and impact loading conditions.
Objectiveso Perform precision testing on NSC, Cor-Tuf1 and Cor-Tuf2 push-off
specimenso Compare test data to Hawkins Direct Shear Modelo Propose changes to the Hawkins Direct Shear Model if required
Research Approacho Push-off specimen quasi-static testing recording relative slip with
high-accuracy laserso Push-off specimen impact testing with 300 to 5715 lb drop
hammerso Post-test analysiso Propose changes to direct shear model
Impact Tests
Assessment of Direct Shear Behavior in Normal and Ultra-High Performance Concretes – Part 1
Static Tests
Push-Off Specimen Design
Specimen f`c
(ksi)Reinforcement
Ratio, ρNumber of
StirrupsStirrup Size
NC-1A-0 4.5 0.0% 0 NANCS-1-1 4.5 0.8% 4 #3NCS-1-2 4.5 1.6% 8 #3CT1-1A-0 29 0.0% 0 NACT1S-1-1 29 0.8% 4 #3CT1S-1-2 29 1.6% 8 #3CT2-1A-0 29 0.0% 0 NACT2S-1-1 29 0.8% 4 #3CT2S-1-2 29 1.6% 8 #3
NSC Cor-Tuf2Cor-Tuf1
Conclusionso Comparison of CT1 and CT2 specimens shows that the addition of fibers to UHPC greatly enhances its direct shear capacity
in both peak shear stress and associated slipso The increase in residual capacity at the higher reinforcement ratio for CT1 suggests that a higher maximum ρfy can be
utilizedo The static and impact Modified Direct Shear model fairly accurately predict direct shear behavior of NSC and UHPC push-off
specimens
Specimen Preparation
Specimen Matrix
Approved for public release; distribution is unlimited
SLIP (in)
(k
si)
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 10
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
3.2
3.4
3.6
3.8
4
NCS-1-1-S-2CT2S-1-1-S-2CT1S-1-1-S-3
Static Test Results(ρ = 0.8%)
SLIP(in)
(ks
i)
-0.05 0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.45 0.5 0.55 0.6 0.65 0.7 0.75-0.3
0
0.3
0.6
0.9
1.2
1.5
1.8
2.1
2.4
2.7
3
3.3
3.6
3.9
4.2
4.5
4.8
NCS-1-1-D-1CT2S-1-1-D-2CT1S-1-1-D-2
Impact Test Results (ρ = 0.8%)