atp 11 b pocket guide(1)
TRANSCRIPT
1: Selecting Site Forge App 2: Enter Username & Password
3: Select Target Site 4: Perform ATP 11B 5: Test for Alpha Sector
6: Test for Alpha sector (Cont’d) 7: Auto Test execution-“Latency” 8: Auto Test execution-“Download”
ATP 11 B Pocket Guide
Go to “Apps” & Select “Site Forge” App
Go to “Apps” & Select “Site Forge” App
Select Target Site Press “Perform
ATP 11 B”
RSRP= more than -80 to -55dBm
SINR=between 22 dB to 27dB
Press “Test”
Click
Note the “CELL ID”
Consult LSMR Engineer for support
Should be same as noted CELL ID in step (5)
9: Auto Test execution-“Upload” 10: Save Results 11: Save Results (Cont’d)
12: Auto Internet Browsing Test 13: Test for Beta & gamma 14: Submit Results
15: Submit Results (Cont’d) 16: Submit Results (Cont’d) 17: Sync Data with Server
Click “Save” if results are fine.
Successful results will be shown in GREEN & Failed results in RED
Note: Max DL >50Mbps & Max UL >4Mbps
A small internet browsing test will be executed automatically at the time of saving results
A floating notification shown after confirmation
Task is shown in ORANGE indicating Sync of data is still pending
Go to Beta Sector Antenna. Press “Next” to start test for Beta sector.
Repeat Step No 5 to 12.
Repeat same for Gamma sector
Click to Sync data with Siteforge server. After successful sync task will be shown in “RED"
Showing GREEN after finishing test for all 3 sectors successfully
Click “Please Confirm”
Click “Next” to start Test for Beta sector
Consult LSMR Engineer for support Consult LSMR Engineer for support