audac catalogus 2014

140
Introduction AUDAC is a Belgian brand with more than 30 years of experience in delivering a great range of audio equipment. The range includes products such as amplifiers, loudspeakers, microphones and many more products which have already proven their functionality and quality throughout the years. Our mission is to manufacture first class products at a competitive price, while continuing the growth of our company. Continuously improving the service to our distributors and end-users and establish our position as major international audio manufacturer. The success of our products is in the continuous observation of the market that is done by our team. Continuously adapting our products to the demands of our customers. Furthermore, we can rely on an experienced team of employees in many different disciplines, state of the art design and test equipment which is continuously upgraded. In this way, we constantly try to improve the quality of our products as well as the research into new technologies which can be used in audio equipment. The pictures that are displayed in this catalog are the projects that are realized in cooperation with AUDAC. 1

Upload: bvba-bekafun

Post on 14-Mar-2016

227 views

Category:

Documents


0 download

DESCRIPTION

 

TRANSCRIPT

IntroductionAUDAC is a Belgian brand with more than 30 years of experience in delivering a great range of audio equipment. The range includes products such as amplifiers, loudspeakers, microphones and many more products which have already proven their functionality and quality throughout the years.

Our mission is to manufacture first class products at a competitive price, while continuing the growth of our company. Continuously improving the service to our distributors and end-users and establish our position as major international audio manufacturer.

The success of our products is in the continuous observation of the market that is done by our team. Continuously adapting our products to the demands of our customers.

Furthermore, we can rely on an experienced team of employees in many different disciplines, state of the art design and test equipment which is continuously upgraded. In this way, we constantly try to improve the quality of our products as well as the research into new technologies which can be used in audio equipment.

The pictures that are displayed in this catalog are the projects that are realized in cooperation with AUDAC.

1

2

Digital audio matrix systems 5

Paging systems 16

Preamplifiers & mixer 26

Music sources 29

Power amplifiers 30

Public address amplifiers & mixers 44

100V Power amplifiers 48

Active audio transceivers 52

Indoor speakers 56

Road speakers 60

Bass cabinets 64

Horn speakers 70

Sound projectors 74

Column speakers 77

Wall speakers 84

Ceiling speakers 94

In-wall speakers 96

Microphones & accessories 112

Transformers 120

Volume controls 122

Connection plates 124

Measurement appliances 126

Power supplies & others 127

Set Solutions 129

3

Cultural center, Ypres Belgium runs on AUDAC

4

Imagine an audio system that can be controlled from anywhere.

A system that can expand to an endless number of zones and select up to 27 different audio inputs in each zone.

A system containing all the filters and delay settings needed for handling any complications you might meet in a project. Taking care of both the meeting and the party afterwards.

A system that can handle complex timed events such as zone linking or playing prioritised messages over selected zones.

Imagine an advanced line of paging consoles with programmable buttons, allowing you to play prerecorded messages in selected zones or even activate non-audio applications such as doors and blinds using relay switches.

We imagined it as well, and went even further: we built it.

AUDAC presents the R2 and M2 Digital Audio Matrix Systems.

Digital audio matrix systems

A system that can expand to an endless number of zones and select

A system containing all the filters and delay settings needed for handling any complications you might meet in a project. Taking

A system that can handle complex timed events such as zone

Imagine an advanced line of paging consoles with programmable buttons, allowing you to play prerecorded messages in selected zones or even activate non-audio applications such as doors and

Digital audio matrix systems

Audio Filters

Wall PanelsUp to 27 inputs

User Friendly InterfaceMulti Voice FilePagingRemote inputs

Web interface

Timed actions

Feedback Reduction

LimiteriPhone & iPod apps

Powerful DSP

Delays

Levels of AccessPriority contacts

Fiber connectivity

5

AUDAC R2 & M28 Output matrix systems

Feature R2 M2Inputs 8 unbalanced line

input8 balanced line or

mic inputs + 1 un-balanced line input

Wall Panel Inputs 8 8

Priority Inputs 4 selectable (all) & 2 mono balanced

4 selectable (all) & 2 mono balanced

Outputs 8 unbalanced line outputs

8 balanced line outputs

RS232 port Yes Yes

Contact inputs 2 2+8

Ethernet access Yes Yes

Preprogrammed events 256 256

Zone Linking Yes Yes

Mono/Stero switching Yes

Digital Audio Filters output input/output

Multiple Input Mixing Yes

Talkover (ducking) Yes

Audio Delay Yes

Built- in Voice File Interface Yes

Limiter on input channel Yes

48V Phantom power on input Yes

Feedback Reduction Yes

Scenes Yes

7 Band EQ Yes

Optional Expansion Kits R2 M27" Touchscreen display Module R2DIS M2DIS

Power Amplifier Kit POW2 POW2

Fiber interconnection module OPT2 OPT2

Controls R2 M2Web Interface Yes Yes

iPhone/ iPad app Yes Yes

Wall Panels Yes Yes

Paging console (APM1xx) Yes Yes

Display R2DIS M2DIS

In general, these AUDAC systems offer an 8 x 8 digital audio matrix system based on a powerful DSP processor. The built-in digital matrix makes it possible to use various output signals in any of the output zones.

Standard outputs include either 8 unbalanced line outputs or 8 balanced line outputs, but the flexible structure of the device makes it easy to extend this number to an appropriate solution for each specific situation.

But they offer much more than that. Their extremely powerful DSP processors provide greater flexibility and higher reliability than other matrix systems of their kind. The R2 and M2 are standard equipped with an integrated Ethernet control interface which makes it possible to configure and control the unit remotely from any device connected to the internet, right from your browser without the use of special apps.

Optional expansion kits:

The R2DIS and M2DIS are optional touchscreen controllers that can be installed in the front side of the matrix enabling you to use all control & configuration functions.

The POW2 module is an optional 16-channel power amplifier kit which can be installed inside the Matrix housing for applications where only a small amount of power is needed for each zone.

A fiber interconnection module, OPT2 enables you to cascade multiple units and transfer up to 8 stereo channels to another unit.

6

Peripheral devicesDW5066Digital All-in-One wall panelThe DW5066 is an All-in-One Wall panel controller. Besides the standard functions such as audio source selection and volume control, it also contains additional signal inputs. Both input selection and volume control can be done for multiple zones using the versatile rotatable push-dial while the integrated 2,5" graphical display ensures a user friendly experience.

The two signal inputs can be used as additional local inputs for the R2/M2 and can be patched to any output zone of the matrix. So you can connect an mp3 player as a music source for a specific zone but also add a microphone for announcements. These input signals are mixed locally.

The panel has RCA Line inputs and an XLR microphone input with possibility to enable 15V Phantom power. Connections to the R2/M2 are made using simple and affordable CAT6 cable to transfer the audio data for over 300 meters (optional CP45 ARP repeater available).

M2 units offer extra functionality on a DW5066. Scene selection and output mode, which allows The RCA or the XLR connector to be set up for output use.

Dimensions: 153 x 94 x 45mm. Build-in depth: 37mm WB50 Wall boxes for the DW5066 are shown on p.125

DW3020/4020Wall panel controllerThe DW3020 and DW4020 are flush mount wall panel controllers for the R2/M2. They can control standard functions of that specific output zone such as audio source selection and volume control.

The DW3020 and DW4020 differ only in size. The DW3020 is designed for AUDAC cover plates or standard 45 x 45 installation materials while the DW4020 is for BTicino Livinglight installation materials.

Shown here with CP45 cover

WEBOPTICAL

R2

AUDAC

LINE IN

MIC IN

Prog.

Vol+

-

+

-

DW3020

Prog.

Vol+

-

+

-

DW3020DW5066

Wallpanel Linkthrough Possibility

7

Remote controlThe main remote control input is an RJ45 connector which should be connected to a LAN network. This makes it possible to control the R2 system using a web browser.

RS232 The RS232 connector can be used to control the R2 with external controllers. This allows you to control the system using hardware by other manufacturers like home or industrial automation systems.

Peripheral InterfacesThere are 10 RJ45 connectors provided for expansion with additional wall control panels and in- and output modules. All these connectors contain RS485 control signals so they allow you to control the amplifier from multiple locations. 8 of these connectors are capable of carrying bi-directional digital audio transfer signals for expansion of the input channels with additional wall line input units.

Input 1-8 / Output 1-88 line level in- and outputs are provided. Each audio input channel has a clipping LED which indicates when the input signal is distorted, a gain control potentiometer to control the level of the input signal and RCA input connectors.

Each zone output is standard fitted with an RCA line level output connector for the connection of external amplifiers. When the optional power amplifier kit is installed, each zone has an amplified stereo audio output with a power of 2 x 60 Watt at 4 Ohm.

Priority InputsThere are two priority audio inputs provided, each with a gain control potentiometer. Furthermore, there are also two priority contact inputs provided.

Digital audio in- and outputsBoth optical and coaxial digital audio in-and outputs are provided.

Link in- and outputAn optional link in- and output allows connection of multiple matrix systems in cascade. This way, audio channels can be transmitted over fiber and installations can be extended over large distances. (Optional OPT2)

R2Multi-zone audio matrix system

WEBOPTICAL

8

R2 functions

Timer schedulingAn internal real-time-clock holds the actual time and date. This gives you the possibility to create specific time schedules. The actions that can be programmed are changing the routing of a signal, adjusting the volume of a zone, muting or editing the paging volume.

Single actions at a certain date and time or actions which repeat regularly (every day or week)can be programmed. A total of up to 256 timer presets can be made. For example, this can be useful when installed in a shop: the system turns-on in the morning, turns-off at night and remains off during the weekends.

Internal DSP signal generatorAn internal DSP signal generator is provided which is able to produce sinusoidal signals with an adjustable frequency, white noise signals and pink noise signals.

Freely programmable DSP filtersIt is possible to add a filter with freely selectable rollover frequency for up to 4 output channels. The rollover frequency is selectable between 10Hz and 22kHz and the filter response is selectable between a High pass filter, a Low pass filter and a Band pass filter. The filter settings can easily be made in the graphical user interface. When a subwoofer is connected, no more external crossover processor is needed.

Priority inputsTwo audio priority inputs and two priority contact inputs are provided. Depending of the configuration, 4 priority signals can be used. The actions that need to happen when a priority signal occurs can be freely programmed. It can switch automatically to the priority audio inputs when an audio signal is applied, or the internal routing can be adapted when a signal is available on the contact inputs. Each of the normal inputs can also act as priority inputs.

Zone linkingTwo or more zones can be linked so that they use the same source, volume, etc settings. This linking can be automatically activated using priority contacts so that multiple zones become linked when, for instance, a separating wall is removed.

Inputs Outputs Controls Power Height Dimensions(W x H x D)

Weight

R2

8 x unbalanced line8 x Wallpanel

2 x Priority8x unbalanced line

(powered with POW2)RS232, Ethernet, Wall Panel,

Display (R2DIS), Contacts 110-240V 50-60Hz 3HE 482 x 132 x 350 mm 8,4 Kg

Technical Highlights

Input Matrix Lockable Digital

Audio FiltersTimedEvents

9

Remote controlThe main remote control input is an RJ45 connector which should be connected to a LAN network. This makes it possible to control the M2 system using a web browser.

RS232The RS232 connector can be used to control the M2 with external controllers. This allows you to control the system using hardware by other manufacturers like home or industrial automation systems.

Peripheral Interfaces10 RJ45 connectors are provided for expansion with additional wall control panels and in- and output modules. All these connectors contain RS485 control signals so they allow you to control the amplifier from multiple locations. 8 of these connectors are capable of carrying bi-directional digital audio transfer signals for expansion of the input channels and remote output duplication.

Input 1-8 / Output 1-8The M2 offers 8 balanced stereo inputs that are all software selectable between line and microphone level. A 9th input can be selected from 4 Stereo line inputs, useful for switching between multiple sources with a single application such as video or radio.

The M2 also offers a relay output with NO and NC contacts for each of the 8 output zones. These can be used for bypassing analog volume controllers and much more such as activating emergency lights when a message is played, powering up beamers or operating automated curtains.

When the optional power amplifier kit is installed, each zone has an amplified stereo audio output with a power of 2 x 60 Watt at 4 Ohm.

Priority Inputs & contact InputsTwo priority audio inputs are provided, as well as 2+8 input contacts which can be used for triggering a wide variety of actions such asplaying voice file messages or recalling mixing presets (scenes, ...)

Link in- and outputAn optional link in- and output allows connection of multiple matrix systems in cascade. This way, audio channels can be transmitted over fiber and installations can be extended over large distances. (Optional OPT2)

M2Multi-Media digital audio mixer

WEB

10

7 BandEQ

AudioDelayLimiter

FeedbackReduction

inputMixing

VoiceFile

M2 functions

Limiter / automatic gain control The M2's on-board processor is equipped with both a conventional limiter/AGC functionality. This means the M2 can edit a source's level in different ways. One possibility is to limit a source's gain and have the M2 lower the gain if necessary. It is also possible to dynamically control a channel's gain so a constant volume is achieved, ideal when, for example, multiple radiostations or sources broadcast at different volume levels This function can also be used to further reduce hum and feedback by working as a noise gate that cuts the signal off when it is not in use.

Feedback reduction Microphones connected to the M2 using one of its 8 balanced inputs can benefit from the M2's signal processing to reduce or eliminate feedback. With a flexible system such as the M2, it is important that it can be used to its full potential without feedback. For example, when a microphone is connected for an unannounced speech, you no longer have to worry about un-wanted feedback. The M2 makes sure that the speaker only has to focus on his speech.

Input mixing The M2 allows any number of inputs to be mixed, letting you combine one or multiple microphones with other audio sources in a single zone. The talkover function even dynamically lowers the volume for a certain source when other selected sources are activated. For instance by having the music level lowered when a microphone is in use.

Built-in voice file interface Prerecorded messages and signals can be played directly from the SD card slot on the front of the unit and recalled by either timed actions, triggered actions or control buttons such as those on an AUDAC APM paging console. This can be used for applications such as an automatically triggered doorbell or evacuation.

Audio delay Playing intelligible audio messages in exceptionally large spaces calls for specialised measures, and the M2 is up to the task. In large venues such as arenas or train stations, sound often takes over a second to reach its audience. By using a custom delay the M2 can assure that each zone plays with a progressive delay, assuring that your message comes across, even to the people in the back.

Inputs Outputs Controls Power Height Dimensions(W x H x D)

Weight

M2

8 x line/mic balanced1 x Switchable Line in

8 x WallPanel2 x Priority inputs

8x Balanced line (powered with POW2)

RS232, Ethernet, Wall Panel, Display (M2DIS), Contacts 110-240V 50-60Hz 3HE 482 x 132 x 350 mm 8,4 Kg

Technical Highlights

In addition to the features which the R2 offers, additional functionalities are provided with the M2. A few of the additional functionalities are listed here:

11

OPT2Fiber interconnection moduleCertain projects can require the user to expand the number of zones or to exchange audio sources, while other applications may call for the need to cover great distances, for instance between different factory halls.

AUDAC RECOMMENDS

FBS125 CableFor linking Matrix units

Visit www.procab.be for more

For these purposes, optional fiber interconnection modules that can be plugged-in internally to the R2/M2 are available. They are capable of carrying 8 stereo channels, This enables each unit to send and receive up to 8 stereo audio channels to one or more R2/M2's. Some channels may be reserved in case priority or paging is used.

Each R2 has a fiber input and a fiber output, the connection is always done in a ring. The first device to the second, the second to … and the last device back to the first. The maximum distance that can be covered between each fiber module is 1000m.

Internal expansion modulesIn addition to the enhanced features that the R2 and M2 have to offer in their standard version, there are some optional expansion modules available that extend and optimize functionality for specific applications.

POW2Power amplifier kitThe R2 and M2 are equipped with 8 stereo line level output channels, on which the appropriate amplifiers can be connected depending on the specific application. The M2's balanced outputs also normally require an external amplifier. For certain applications where only a low power is required, this optional power amplifier kit can be internally installed in to the R2 or M2. It consists of 16 x 60 Watt at 4 Ohm class D amplifiers (8 stereo channels). These channels can be bridged to obtain 8 mono amplifiers with a power of 120 Watt at 8 Ohm.

R2+OPT2

M2+OPT2

R2+OPT2

Fiber Connection Cable 1 Fiber Connection Cable 2

Fiber Cable Connector

12

7" Touchscreen display kit for R2/M2 The R2DIS/M2DIS are optional display units with touchscreens which can be installed internally in the front panel of the AUDAC digital audio matrix systems. This unit consists of a 7” TFT display panel with a resolution of 800 x 480 px that is fitted with a resistive touch-screen panel. It is con-trolled by a powerful 32 bit processor which communicates directly with the R2 and M2's DSP processor.

This unit allows the user to operate the control functions of the matrix systems without any external equipment. This can be useful when the system is installed in a technical room where no external control devices are within reach.

Example residential configuration

CMP30

CMP30

1 Livingroom

3 Kitchen

6 Hall

8 bedroom 3

7 Bedroom 2

2 Bathroom

4 Outside

5 Master Bedroom

Prog.

Vol+

-

+

-

Prog.

Vol+

-

+

-

Prog.

Vol+

-

+

-

Prog.

Vol+

-

+

-

AUDAC

LINE IN

MIC IN

AUDAC

LINE IN

MIC IN

AUDAC

LINE IN

MIC IN

AUDAC

LINE IN

MIC IN

DW5066

DW3020

Prog.

Vol+

-

+

- DW3020

Prog.

Vol+

-

+

- DW3020

DW3020

DW3020

DW3020

DW5066

DW5066

DW5066

WiFiFi

LaptopiPadiPhone

M2M2

POW2+ M2DIS

Doorbell

R2

R2

POW2+OPT2

+OPT2

+ R2DIS

R2DIS/M2DIS

13

Below we can see an example setup using three units in a medium-sized business.

First of all there are the main building offices equipped with their own R2. Two CMP30's and two MCD15 units provide CD, MP3 and tuner music to the entire facilitiy. Each zone in the building has its own local DW5066 wall panel for adjusting their zone settings according to their own preference or adding their own music sources to the system.A paging console is positioned near the front desk.

The warehouse has paging consoles setup across the building for easy communication between various parts of the supply and processing chain. Paging calls can be made globally or to specific departments. Local music choice and volume can be edited using DW3020 wall panels.

Finally the meeting room and its surrounding offices have a more advanced setup. Not only does the room have a powered M2 connected with two wall panels and a microphone, a paging console is also setup to control lighting, projection and window blinds using and ARJ and ARU relay switching system. Computers throughout the building allow authorised personnel to access the matrix unit's advanced options.

Example setup in an industrial setting

Main BuildingOffices R2

R2CPA12AUDAC

CPA12AUDAC

CPA12AUDAC

CPA12AUDAC

CPA12AUDAC

CPA12AUDAC

AUDAC

LINE IN

MIC IN

DW5066

AUDAC

LINE IN

MIC IN

DW5066

AUDAC

LINE IN

MIC IN

DW5066

AUDAC

LINE IN

MIC IN

DW5066

AUDAC

LINE IN

MIC IN

DW5066

AUDAC

LINE IN

MIC IN

DW5066

Meeting Room

M2M2

AUDAC

LINE IN

MIC IN

DW5066

POW2

WarehouseWarehouse R2R2

CMP30

CMP30

CMP30

CMP30

CMP30

Prog.

Vol+

-

+

-

DW3020

Prog.

Vol+

-

+

-

DW3020

Prog.

Vol+

-

+

-

DW3020

Prog.

Vol+

-

+

-

DW3020

Prog.

Vol+

-

+

-

DW3020

CAP412

CAP412

14

Each AUDAC Multi-zone Matrix is equipped with a fully functional web based user interface. This means that the amplifier can be fully operated through any web browser or flash-enabled device connected to the internet, such as a PC, Laptop, tablet or even a smartphone, without requiring additional software.

To access the functions of the R2/M2, just use your standard web browser and browse to the IP address configured in the settings. After logging in you have full access to all functions of the R2/M2 amplifier. Seperate logins are possible for both admins and regular users.

The web based user interface is very user friendly and intuitive. After logging in, a fader overview of all output zones is displayed. The configuration menu gives an overview of all setting, such as time actions, network settings, priority settings, user settings, paging settings and much more.

R2 Remote/ M2 RemoteApp for iPad & iPhone AUDAC’s software engineers have developed a remote App for iPhone, iPad and iPod Touch. It has always been possible to control your Audio Matrix from any web-connected PC or other flash-based appliances, but AUDAC’s free R2 Remote or M2 Remote Apps take it to another level.

Control the volume, muting and source selections for up to 8 zones on a single R2/M2. You can control multiple units using your basic WIFI, EDGE or 3G connection. Switch zones by swiping across the screen. Any time, anywhere in the world.

Available on the

Each AUDAC Multi-zone Matrix is equipped with a fully functional web based user interface. This means that the amplifier can be fully operated through any web browser or flash-enabled device connected to the internet, such as a PC, Laptop,

To access the functions of the R2/M2, just use your standard web browser and browse to the IP address configured in the settings. After logging in you have full access to all functions of the R2/M2 amplifier. Seperate logins are possible for both

The web based user interface is very user friendly and intuitive. After logging in, a fader overview of all output zones is displayed. The configuration menu gives an overview of all setting, such as time actions, network settings, priority settings, user

R2/M2 Web based user interface

15

Paging systemsThe AUDAC APM paging system is designed to fulfill all your paging needs. It handles priority calls, dispatching and even evacuation purposes.

Reliability, versatility and usability are the major goals during the development of the APM paging system.

The result is a system that is fully controllable and configurable through the web-based user interface of the AUDAC R2/M2 matrixes and APC100 configuration & control unit. Because changes are easy to make and can be made from any ethernet-connected computer, the APM offers the ideal solution for a wide variation of paging systems, ranging from simple and small installations, to the largest and most complex installations with specific requirements.

The system has a fully modular structure which means that it can perfectly be extended or cascaded, to create an infinite number of configuration possibilities while keeping further expansion and growth in mind.

There are also some additional features provided like “Multiple Ding-Dong" and a “Voice File Interface". The “Multiple Ding-Dong" means that the customer can create custom chime tunes, which can be played before the spoken message is spread. The “Voice File Interface" allows the customer to upload messages to the APM paging microphone. Up to 30 different voice files with a total length of 10 minutes can be stored. The voice files can be triggered by pushing one of the freely programmable buttons on the APM console or by pre-programmed event (configuration through APC100).

The communication between the APM consoles is done by a databus, which also provides the necessary power supply. Indication leds are applied to tell the user if the databus is occupied.

The housing of the paging consoles is made of sturdy steel and is equipped with three color illuminated LED push buttons which provide a clear overview of the functions.

The connections for the databus are made with UTP CAT6 cable with RJ45 connection plugs. When using multiple paging microphones in one system, the additional ARJ03P junction box has to be used.

Typical application

R2

APM APM

CAT6

CAT6

CAT6 CAT6

APM

APMARJ03PARJ03PARJ03P

16

APMDigital paging microphonesThe APM series are digital paging microphones fitted with a 32 cm gooseneck microphone containing a back electret condenser cell with cardioid pickup pattern. A built-in limiter constantly monitors the input level, guaranteeing a constantly maintained and clear output signal. The status of the reproduced signal is indicated using different LED’s on the microphone’s base, providing an indication to the speaker that the signal is clear and audible in all situations.

Each console contains three standard buttons (Except the APM101 which only has PTT) with pre-assigned functions: PTT (Push To Talk), Select all and Clear all. The other function buttons can be configured to make announcements to particular zones, grouping zones or other functions. (Trigger & switch relay, voice-file announcements, … )

Standard configurations can be made using matrix systems (R2 & M2) while special configurations can be programmed using the APC100 configurator tool in combination with 'Audac system manager' software.

APM101 MK2 Paging MicrophoneDigital paging microphone with 1 function button APM104 MK2

Paging MicrophoneDigital paging microphone with 4 function buttons

APM108 MK2Paging MicrophoneDigital paging microphone with 8 function buttons APM116 MK2

Paging MicrophoneDigital paging microphone with 16 function buttons

Illuminated zone and function selection buttons provide a clear overview monitoring

RJ45 connection for digital audio and RS485 data transfer over UTP Cat6 Cabling

High quality backelectret condensermicrophone with cardioid pickup pattern

17

ARURelay groups

The ARU series are versatile digital relay modules coming in three models with a different number of relays. They can be contact or through RS-485 controlled and can be linked with the APM databus. Their typical applications are ranging from paging applications where specific zones need switching between background music and announcements, digital (matrix controlled) paging applications which need to be extended with priority call override and/or integration of audiovisual solutions and many more.

Every relay contains two inputs which can be switched to the output switching can be made for (balanced & unbalanced) line level signals, 100V & low impedance loudspeaker signals and low-voltage supply.

This way, it offers a flexible solution for a wide variation of new installations, but alsof or easy expansion of exisiting systems. They come in a 4-relay, 8-relay and 16 relay version all fitted in a DIN-rail mountable enclosure and multiple units can be cascaded when more relays are required.

ARU108Relay groupRelay unit fitted with 8 switching relays

ARU104Relay groupRelay unit fitted with 4 switching relays

ARU116Relay groupRelay unit fitted with 16 switching relays

ARJ03PJunction boxesThe ARJ03P junction boxes can be used for cascading multiple peripheral devices on a databus. It features an input, output and linkthrough RJ45 connector. Two jumpers allow easy termination at the characteristic impedance of the databus. A terminal block connec-tor allows the connection of an additional 24 Volts power supply. This can be required when the voltage at the end of the databus becomes insufficient due to the voltage drop across the cable. (with long cable length)

Wall junction boxesARJThe CP45xxARJ is an RJ45 wall connection plate which can be used as wall outlet for any communication bus transmitted over 4-pair (8-conductor) twisted pair cabling. Examples are TCP/IP networks or the connection of a digital paging microphone to a outlet socket.The device can be connected to the front using standard patch cables, while the 8-pin terminal block connector on the rear allows connectivity to integrated wiring. The terminal block connector guarantees a stable connection with minimal required built-in depth and the possibility for linking through to a second device or junction box.

A 24V connection allows you to connect an external power supply in case the distributed voltage does not suffice for the chosen distance and two jumpers allow termination of the audio or data bus at its characteristic impedance.

BTicino Livinglight CP43ARJ/W 43 x 43 mm, whiteCP43ARJ/B 43 x 43 mm, blackCP43ARP/W 43 x 43 mm, With repeater, whiteCP43ARP/B 43 x 43 mm, With repeater, black

AUDAC, Niko CP45ARJ/W 45 x 45 mm, whiteCP45ARJ/B 45 x 45 mm, blackCP45ARP/W 45 x 45 mm, With repeater, whiteCP45ARP/B 435 x 45 mm, With repeater, black

ARPThe CPXXARP Wall junction boxes offer the same functionality as the CPXXARJ boxes, but also Include a built-in repeater that increases the maximum transmission distance for digital audio transmissions from 300 meters up to 600 meters.

18

APC100Universal configuration & control unitThe APC100 is a configuration and control unit which can be used in combination a wide variation of 'smart' AUDAC devices, ranging from matrix systems and mixers to paging consoles and wall panels.

It features different types of communication ports, such as TCP/IP, RS-232 & RS-485. This way, it can communicate with every 'smart' device connected in your installation and establish the missing link between them.

This makes the installers life easier and time saving. Complex system configurations and updates can be made in a moment, as well as back-ups and duplicates. Specific files such as voice-file messages and screensavers can be uploaded without requiring no more than the APC100 and a computer. An internal real-time clock allows synchronizations for time controlled events in external devices. (When synchronized with internet time server)

The AUDAC system manager software application allows the user to manage and control APC100's functions together with full configuration functionalities for any 'smart' connected devices. (through TCP/IP, RS-232 or RS-485)

In addition it can also be used as a standard gateway receiving serial communication and converting into TCP/IP format and reversed. This allows system integration for devices such as audio sources & power amplifiers without integrated network capabilities to be implemented into your automation system.

AUDAC system managerThe Audac System manager is a windows compatible software application which detects all 'smart' devices with their peripherals in your system and allows extended configuration, update and backup functions for the equipment.

It will automatically detect and download the latest firmware updates from the AUDAC server and save them locally on your computer, this way the latest updates can be carried easily on-site and made to the installation without requiring an internet connection.

Other functions such as creating and reloading device backups, pre-loading configurations to peripheral devices and system monitoring will make installers life more easy.

For some functions, the APC100 configuration unit is required to establish the connection between the system manager (software) and the physical device. Compatible functions and features can be found on the AUDAC website, where also the software can be downloaded.

DISCOVER UPDATE BACKUP

M2 M2

• Configuration of ‘smart’ AUDAC devices

• RS-232 and RS-485 serial ports

• TCP/IP Network connection

• Bidirectional data transfer with peripherals

• Network to Serial gateway

• Real time clock

Prot

Clip

-20dB

Sig

CH1 CH2

ONPOWER

SMA750AUDAC

Prot

Clip

-20dB

Sig

CH1 CH2

ONPOWER

SMQ750AUDAC

CH1 CH2 CH3 CH4

TCP/IP

TCP/IP

TCP/IP

RS232

RS485

RS485

Example setups

AUDAC

LINE IN

MIC IN

LAN

Control

Update

Configure

19

De Oude Vismijn, Ghent Belgium runs on AUDAC

20

MTX-Series multi zone audio matrixThe new standard in multi zone audio.

The MTX series are a great addition to the AUDAC product range. With this new series, our matrix systems not only contain top of the line models, but it has filled the gap with a very cost-efficient matrix system for a wide variety of Multi-Zone audio applications.

The new range offers two different models with the same features but with different zone possibilities. The MTX48 version is capable of controlling up to four different stereo zones while the MTX88 can control up to eight different stereo zones.

All of the MTX’s advanced features and settings are controllable using the rotary push buttons on the front.

Mic 1

GainControl

Zone Output

Front Panel Controls

Mic 2

Line 3

Line 4

Line 5

Line 6

WLI / MWX65 (7)

WMI (8)

Paging

TCP/IP

RS232

RS485

Zone 8Zone 7

Zone 6Zone 5

Zone 4Zone 3

Zone 2

MATRIX

Zone 1

Webserver/ CPU

Tone Volume

Zone 2 Zone 3 Zone 4 Zone 5 Zone 6 Zone 7 Zone 8 MTX88Zone 1

WEB

24VOLT

21

WEB

MTX484-Zone multi zone audio matrix

The MTX48 is the four-zone version of the MTX series, equipped with two balanced microphone inputs with priority function, phantom power possibility and three-band tone control. The gain can be adjusted within a range allowing both microphone and line level signals.

Four stereo line-level inputs are provided to which any line-level music source such as a CD-player, Tuner or MP3 player, ... can be connected. The other two inputs of the matrix are the additional wall panel inputs for both line and microphone signals.

The MTX can be controlled by means of additional control panels, its fully functional web based interface or through the iPhone/ iPad Remote app. The RS232 port makes the MTX compatible with any home & industrial automation systems supporting RS232.

The front panel of the MTX shows a rotary button per zone with indication LEDs for accessing controls and settings. A built-in PFL loudspeaker makes it possible to pre-listen every channel without the need for a headphone.

The balanced line-level zone output connections are performed using 3-pin Euro-terminal block connectors, each of them accompanied with an RJ45 connector for connecting additional wall panels for that zone.

A 24 volts power connection makes it possible to keep the MTX running on emergency power, even if the mains power is shut down.

Inputs Outputs Controls Power Unit Height Weight Dimensions(W x H x D)

MTX482 Mic, 4 Line,

Wall Panel4 x Balanced

Stereo Line, 4 ZonesRS232, Ethernet, Wall Panel, Front

110 - 240 V 50-60 Hz24V DC 2 HE 6,24 Kg 482x88x335 mm

Technical Highlights

• 4 Output zones

• 2 Microphone inputs with priority + 15V Phantom power and 3 band tone control (±15dB)

• 4 line inputs.

• Wall panel connections for every zone (audio input + control panel),

• Front panel control

• TCP/IP and RS232 control functions.

• Paging console connection

• 24 Volts DC operation possibility.

• Built-in PFL Speaker

24VOLT

22

MTX888-Zone multi zone audio matrix

The MTX88 is the eight-zone version of the MTX series, equipped with two balanced microphone inputs with priority function, phantom power possibility and three-band tone control. The gain can be adjusted within a range allowing both microphone and line level signals.

Four stereo line-level inputs are provided where to any line-level music source such as a CD-player, Tuner or MP3 player, ... can be connected. The other two inputs of the matrix are the additional wall panel inputs for both line and microphone signals.

The MTX can be controlled by means of additional control panels, its fully functional web based interface or through the iPhone/ iPad Remote app. The RS232 port makes the MTX compatible with any home & industrial automation systems supporting RS232.

The front panel of the MTX shows a rotary button per zone with indication LEDs for accessing controls and settings. A built-in PFL loudspeaker makes it possible to pre-listen every channel without the need for a headphone.

The balanced line-level zone output connections are performed using 3-pin Euro-terminal block connectors, each of them accompanied with an RJ45 connector for connecting additional wall panels for that zone.

A 24 volts power connection makes it possible to keep the MTX running on emergency power, even if the mains power is shut down.

• 8 Output zones

• 2 Microphone inputs with priority, + 15V Phantom power, 3 band tone control ±15dB)

• 4 line inputs.

• Wall panel connections for every zone (audio input + control panel),

• Front panel control

• TCP/IP and RS232 control functions.

• Paging console connection

• 24 Volts DC operation possibility.

• Built-in PFL Speaker

Inputs Outputs Controls Power Unit Height Weight Dimensions(W x H x D)

MTX882 Mic, 4 Line,

Wall Panel8 x Balanced

Stereo Line, 4 ZonesRS232, Ethernet, Wall Panel, Front

110 - 240 V 50-60 Hz24V DC 2 HE 6,38 Kg 482x88x335 mm

Technical Highlights

WEB

24VOLT

23

MTX Peripherals and controllers

Available on the

What makes the MTX matrix system superior to other matrix systems in its price range is that they also offer specific features which were previously only available in the top-range products.An additional advantage is that they are compatible with multiple wall panels and controllers.

Wall panelsMultiple wall panels which can be linked through are available for the MTX, ranging from simple external inputs to complex controller devices equipped with full-colour displays. Connections are made using simple and affordable CAT5 cable to transport the audio and data for over 300 meters. All available in white (/W) or black (/B).

MWX43/45: Local zone selection and volume controlWMI18/22: Local XLR microphone input WLI18/22 Local RCA Line Input.

WMI18MWX43/45

Available sizes: 45*45mm: MWX45, WMI16, WLI18BTicino Livinglight: MWX43, WMI20, WLI20

WLI18

MTX Web interfaceThe MTX features a fully functional web based user interface. The device and all of its advanced settings can be controlled using your web browser. This way the MTX can be accessed from any flash-compatible PC, tablet or smartphone.

Use the web interface to manage wall panels, set the paging volume or configure priority.

MWX65 All-In-One wall panelThe MWX65 not only allows you to control the MTX’s standard functions such as audio source selection and volume control, but is also equipped with an additional mic and line input.

These additional inputs can be mixed locally using two push rotary volume dials. The 2,5” display allows you to use the MTX’s equaliser, and much more. The MWX65 can be linked through with a WMI and MWX43/45 wallpanel.

Available in black (MWX65/B) and white (MWX65/W)

MTX Remote for iPhone and iPadControl your MTX unit wirelessly using your iPad or iPhone. The MTX Remote can be downloaded straight to your device using the app store.

With this app one swipe or touch allows you to edit the zone volume, select a zone, select a source, or mute the entire channel.

WMI18/22

Prog.

Vol+

-

+

-

MWX43MWX45

WLI18/22

Zone 2 Zone 3 Zone 4 Zone 5 Zone 6 Zone 7 Zone 8 MTX88Zone 1

Wallpanel Linktrough Possibility

24

MPX Series

The construction is made of weighted ABS material and finished with an acrylic top panel. The buttons are integrated using the capacitive touch principle without any mechanically moving parts. Selection & status LED’s are integrated below the acrylic surface, giving an indication of the selected zones and databus status. Besides the zone selectors, quick operation is allowed through the Select & Clear all buttons, while the push-to-talk (PTT) button should be pressed during the announcement. An integrated chime tone is heard before any announcement.

Announcements can be made to the integrated pipe-neck microphone with a cardioid pickup pattern which can be tilted to the desired angle.

The microphone should be connected to the matrix system using the fixed cable with a length of 2 meters. The distance can be extended to a maximum length of 300 meters, using standard CAT5E (or better) twisted pair cabling. Cascading of multiple paging stations is made possible using the priority-based (user-configurable) databus, when using additional junction boxes ARJ03P or CP45ARJ.

The microphones are specifically designed to be used in combination with the MTX Multi-Zone audio matrix system. They come in two different versions with four and eight zone selection buttons, offering a plug-and-play solution for corresponding MTX matrix systems.

MPX48 Paging microphone4-Zone Paging microphone for MTX48

MPX88 Paging microphone8-Zone Paging microphone for MTX88

• Capacitive touch buttons

• Selection & status indication LED’s

• Integrated chime

• PTT, Select & Clear all buttons

• Pipe-neck microphone with cardioid polar pattern

• Priority-based paging

• Up to 300 meters

25

PRE166 Channel stereo preamplifier

The PRE16 is a simple but versatile, single rack space, 6 channel stereo preamplifier. It offers the perfect solution for a wide variation of applications where various and multiple music sources should be mixed and distributed through an audio distribution system.

It is reliable, easy to install, and simple to operate, but still provides the possibility to connect and control all kinds of music sources.

It is constructed as a six channel stereo preamplifier featuring two balanced microphone input channels, which both with a three-band tone control, gain control, phantom power and a talk over function. When the phantom power switch is turned ON, 15V is supplied to the corresponding microphone channel for powering condenser microphones. When the talk over switch is turned ON, other present music sources will be ducked when a signal is present.

The other four input channels are direct line inputs, of which one is constructed as a balanced stereo line input, while the remaining three line inputs are unbalanced.

All the connections and channel settings can be made at the rear side of the PRE16, while on the front all the individual channel volume control buttons are provided, just like the general output volume control with two band tone control.

• Balanced stereo output

• 2 Mic channels with talkover & 3 band EQ

• 15V Phantom power

• One stereo balanced line input

• Three stereo unbalanced line inputs

Mic 1 Mic 2

Tuner + MP3 Tuner + MP3

Example

26

THD+N Signal / Noise Freq Response Power supply Dimensions(W x H x D)

Weight

PRE16 < 0.1% > 93 dB 20Hz - 20 kHz 240 V AC / 50-60 Hz 482x44x330 mm 3.75 Kg

Technical Highlights

PRE26Two zone - 6 Channel stereo preamplifier

• Two zone system

• Balanced stereo outputs

• 2 Mic channels with talkover& 3 band EQ

• 15V Phantom power

• One stereo balanced line input

• Three stereo unbalanced line inputs

The PRE26 is a two zone stereo preamplifier with 6 input channels, constructed in a single rack space housing. It is designed to offer a versatile solution for a wide variation of applications where various and multiple music sources are to be mixed and distributed through a two zone audio distribution system.

It is reliable, easy to install, and simple to operate, but still provides the possibility to connect and control all kinds of music sources.

It is constructed as a six channel stereo preamplifier featuring two balanced microphone input channels, which both with a three-band tone control, gain control, phantom power and a talk over function. When the phantom power switch is turned ON, 15V is supplied to the corresponding microphone channel for powering condenser microphones. When the talk over switch is turned ON, other present music sources will be ducked when a signal is present.

The other four input channels are direct line inputs, of which one is constructed as a balanced stereo line input, while the remaining three line inputs are unbalanced.

All the connections and channel settings can be made at the rear side of the PRE26, while on the front all the individual channel volume control buttons are provided.

Two general output volume controls, each representing one output zone, are provided on the front panel. Each of them includes a two-band tone control and a LED VU-meter which indicates the output level.

Mic 1 Mic 2

Tuner + MP3 Tuner + MP3

Zone 1 Zone 2

Example

27

THD+N Signal / Noise Freq Response Power supply Dimensions(W x H x D)

Weight

PRE26 < 0.1% > 93 dB 20Hz - 20 kHz 240 V AC / 50-60 Hz 482x44x330 mm 4 Kg

Technical Highlights

PMX12412 Channel PA mixer

• 6 mono and 4 stereo inputs

• 3 band equalization

• 1 AUX with pre / post switch

• 24 bit built-in DSP

• 100 preset effects available

• Peak signal indication

• PFL available on every channel

• 19” adapters included

• Flexible and compact

• 48V Phantom power

The PMX124 is a 12 channel multi purpose mixer that is equipped with 6 mono and 4 stereo inputs.

It is suitable for a wide range of applications like bands and musicians, as well as fixed installations.

The integrated 24-bit DSP processor contains 100 fixed high quality effects such as reverbs, delays, chorus, flange and many more. The intensity can be controlled by the EFX RTN fader, and a potentiometer for every channel.

Every input signal is equipped with a 3 band equalization filter, and the channels 1 to 7/8 contain a HPF filter.

Furthermore, every channel has a PFL and mute switch, and two high-resolution bargraphs monitor the main output signals.

48V phantom power is available at the microphone inputs for powering condenser microphones.

It comes with 19” mounting brackets and has a built-in height of 10HE.

28

THD+N Crosstalk Freq Response DSP Power supply Dimensions(W x H x D)

Weight

PMX124 < 0.01% < 70 dB 20Hz - 20 kHz 24 bit / 100 presets 240 V AC / 50-60 Hz 328x420x65 mm 3.4 Kg

Technical Highlights

CMP30Digital audio source - CD, MP3 & Tuner

The CMP30 is a All-In-One audio source device which accomodates three different kinds of audio sources into one single device.

It combines a CD-Player, MP3 player and AM/FM tuner into one single rack space 19” housing.

On the front is a CD slot, a USB slot and a SD/MMC memory card slot provided. This makes it possible to play regular audio CD's as wel as MP3 files from either CD's, USB memory sticks or SD/MMC memory cards.

Three outputs are provided at the rear of the device. Two of them are dedicated for either the tuner or CD/MP3 function, while the third output is a variable output. Because of the two separate stereo outputs, the tuner and CD/MP3 player can operate simultaneously. This feature can be useful for applications such as Multi-Zone systems where multiple audio sources are required at a time.

The variable output has a volume control function and carries the signal from the CD/MP3 player when a track is playing. However, when the CD/MP3 ends the variable output will automatically switch to tuner function.

An RS232 control port makes the operation possible from external control devices such as home automation systems.

• CD-player with MP3 function

• AM/FM tuner

• USB & SD/MMC slot

• RS232 control port

• Line outputs for tuner & CD/MP3

• Variable line output

• Single track play mode

Suggested Accessory: UMS088 GB Premium quality USB Memory Stick.The UMS08 is a micro-sized usb-stick measuring only 12 x 23mm. Designed specifically for 19" appliances such as the CMP30, allowing you to store thousands of files.black brushed metal casing.

29

Inputs Control Mounting Unit Height Power Supply Dimensions (W x H x D)

CMP30 CD, USB, SD/MMC RS232 19" 1 HE 240 v AC - 50 Hz-60 Hz 483x44x380 mm

Technical Highlights

The AMP20 is a Mini Stereo Power Amplifier with a power rating of 2 x 15 Watt, that lends itself perfectly to small speaker systems requiring compact and economical audio solutions. It offers the ideal solution for applications such as class rooms, offices and meeting rooms where only a small amount of speakers are required.

The compact size and very high efficiency makes it perfectly suited to be hidden in a closet, on a false ceiling or mounted under a desk or table. The combination of the stereo balanced line, with microphone input, makes it perfectly suited for applications where it should be used in combination with projection screens and video sources while a microphone is connected. Two gain potentiometers make it possible to control the sensitivity and balance between music and speech, while a switch allows bridging of the output channels to obtain one channel with merged output power.

The WP523 remote wall mixer can be connected for applications where local mixing for the inputs is desired, while large distances can be covered between the source and amplifier using simple CAT5 twisted pair cabling. The volume controller input allows connection of an additional wall controller for overall volume control.

The Class D Amplifier technology, standby mode and included switching power supply makes this device compliant to the highest energy efficiency and environmental requirements.

Stereo @ 4 Ω Stereo @ 8 Ω Bridge @ 8 Ω Efficiency Power Consumption

Freq Response Power supply Dimensions(W x H x D)

Weight

AMP20 2 x 15 Watt 2 x 7.5 Watt 1 x 30 Watt 87%@Max <1W in Standby 20Hz - 20kHz 110~240V AC / 47~63 Hz 110x44x160 mm 1,20 Kg

Technical Highlights

• 2 x 15 Watt amplified speaker output

• 1 x Stereo balanced line input (Terminal Block)

• 1 x Balanced microphone input (Terminal Block)

• Remote wall mixer connection (RJ45)

• Remote volume controller connection (RJ45)

• Output limiter

• Switching power efficiency level V, Energy StarTM v3.0 certified

• Automatic standby mode:Standby power consumption: 0.8 Watt (Incl PSD241)

Nominal power consumption: 4.9 Watt (Incl PSD241)

• Compatible with 100V transformers

Optional MBS200 Mounting bracket

AMP20Mini stereo amplifier

• Compatible with 100V transformers

Line LevelMusic Source

Stereo AudioMic CAT5

CAT5

Microphone

VC3208WP523

AUDAC

LINE IN

MIC IN

AMP20

30

The AMP523 is a Mini Stereo Amplifier with an Integrated web based control unit, featuring four stereo line inputs and one balanced microphone input with phantom power. It has an output power rating of 2 x 15 Watt.

The simple and compact but versatile functionalities makes it perfectly suited for small speaker systems requiring compact and economical audio solutions which are comprehensive and easily controllable. Some typical applications are classrooms where the audio system will be used in combination with a smartboard, offices and meeting rooms where the music should switch automatically from background music to speech or playback when the presentation starts, …. And many other similar applications.

The compact size and very high efficiency even makes it possible to hide it in a closet, on a false ceiling or mount it under a desk or table. The various stereo line inputs allow simultaneous connections for different sources such as laptops, CD or MP3 Players, Tablets, while having a microphone connected.

The switching between the inputs, volume regulation and other function controls can be done in multiple ways: an integrated website makes it possible to control all the functions from any computer with a web browser without requiring additional software, while the RS232 connection makes it possible to control the AMP523 with any device supporting serial communication, such as a computer or even a home or industrial automation system. Another option is to control the system through smartphones and tablets using the specially developed Apps.

To make the installation even more complete, an optional MWX43 or MWX45 wall panel can be installed to control the signal routing and volume level from one or multiple fixed locations.

The Class D Amplifier technology, standby mode and included switching power supply makes this device compliant to the highest energy efficiency and environmental requirements.

Stereo @ 4 Ω Stereo @ 8 Ω Bridge @ 8 Ω Freq Response Power supply Dimensions(W x H x D)

Weight

AMP20 2 x 15 Watt 2 x 7.5 Watt 1 x 30 Watt 20Hz - 20kHz 110~240V AC / 50~60 Hz 110x44x160 mm 1,20 Kg

Technical Highlights

• 4 Stereo line inputs

• 1 x Balanced microphone input with phantom power

• TCP/IP and RS-232 Control

• Stereo line output

• 2 x 15 Watt amplified speaker output

• Bridge mode

• Compatible with 100V transformers

Optional MBS200 Mounting bracket

AMP523Web based mini stereo amplifier

RS232

CAT5

MWX43/45

AMP523

WLIWMIProg.

Vol+

-

+

-

Remote App

4 x Line LevelMusic Source

Microphone

Available on the

WEB

31

7 BandEQInput Matrix

TimeAlignment Lockable

SpeakerProtection

DynamicBass

SpeakerPresets

EnergyEfciencyLimiter

DigitalAudio Filters

7 BandEQInput Matrix

TimeAlignment Lockable

SpeakerProtection

DynamicBass

SpeakerPresets

EnergyEfciencyLimiter

DigitalAudio Filters

7 BandEQInput Matrix

TimeAlignment Lockable

SpeakerProtection

DynamicBass

SpeakerPresets

EnergyEfciencyLimiter

DigitalAudio Filters

7 BandEQInput Matrix

TimeAlignment Lockable

SpeakerProtection

DynamicBass

SpeakerPresets

EnergyEfciencyLimiter

DigitalAudio Filters

7 BandEQInput Matrix

TimeAlignment Lockable

SpeakerProtection

DynamicBass

SpeakerPresets

EnergyEfciencyLimiter

DigitalAudio Filters

WaveDynamics™A complete library of AUDAC loudspeaker and set solution presets is available for your projects, making it easy as picking the right file, loading it & play! Besides the optimal acoustic configurations, this library also includes the loudspeaker performance parameters providing a bulletproof protection for them.

The 7-Band fully parametric equalizer with adjustable frequency and Q factor and Butterworth, Bessel and Linkwitz-Riley filters with selectable roloff allow you to create custom configurations, tweak your setup to the finest detail and adapt to your room's acoustics. A delay function allows time-alignment of different speakers in your installation.

Configurations also allow you too bridge the outputs, double the output power of stereo channels to one mono channel or make a single three-channel amplifier driving a complete setup composed of stereo Mid/High frequency speakers and a bass cabinet.

ControllabilityThe operation and configuration of the device can be done in multiple ways. The most obvious way is by using the front panel controls, featuring a rotary selection dial and channel selection buttons with a clear and intuitive user inferface on the 2.5" graphical LCD Display.

Total system configurations for pre-defined set solutions can be loaded into the amplifier using the USB port.

Integration of the audio system into home and industrial automation systems is made easy through the RS-232 connection & control port whereby functions such as input switching, volume adjustment, ... can be controlled.

The SMA & SMQ series are Class D Power Amplifiers featuring WaveDynamics™ audio processing technology. They come in different output configurations with two or four channels and are available in output powers of 350 Watt, 500 Watt and 750 Watt. Their great flexibility and different configurations make it the solution for nearly every system, no matter if it's a fixed installation or a mobile application.

SMA & SMQ SeriesWaveDynamics™ Class D power amplifiers

The SMA & SMQ series are Class D Power Amplifiers featuring WaveDynamics™ audio processing technology. They come in

32

7 BandEQInput Matrix

TimeAlignment Lockable

SpeakerProtection

DynamicBass

SpeakerPresets

EnergyEfciencyLimiter

DigitalAudio Filters

7 BandEQInput Matrix

TimeAlignment Lockable

SpeakerProtection

DynamicBass

SpeakerPresets

EnergyEfciencyLimiter

DigitalAudio Filters

7 BandEQInput Matrix

TimeAlignment Lockable

SpeakerProtection

DynamicBass

SpeakerPresets

EnergyEfciencyLimiter

DigitalAudio Filters

7 BandEQInput Matrix

TimeAlignment Lockable

SpeakerProtection

DynamicBass

SpeakerPresets

EnergyEfciencyLimiter

DigitalAudio Filters

7 BandEQInput Matrix

TimeAlignment Lockable

SpeakerProtection

DynamicBass

SpeakerPresets

EnergyEfciencyLimiter

DigitalAudio Filters

FlexibilityEvery system comes with different requirements and every customer has his own preferences. Because of this, the structure is made as flexible as possible.

This is achieved by an input selection matrix. Each of the input connections can be patched to any amplifier channel and contains software controllable gain. The different implementations of the in- and output connectors allow the easiest way of connection for every application, while allowing signal link through to other amplifiers.

ProtectionOptimal protection is not only required for the listeners satisfaction, but can also be important for complying to the imposed regulations and guaranteeing the lifetime of the equipment. Because of this, protection precautions are implemented in different ways.

Firstly, user access is made possible on different levels. The device can be blocked or accessed in user or administrator level. Different levels allow different configuration and control functions, giving limited (Eg: only volume) control access to standard users and full configuration control to administrators. User restriction can be enabled & disabled and is given through password and / or USB-key.

Secondly, equipment protection is implemented by an output limiter which monitors the output power of every channel and will intervene when the output exceeds a certain level. The corresponding level can be software configured and is indicated in Watts. When the output limiter is configured at the maximum power of the loudspeaker, you can rest assured that the speakers won't be blown during your absence.

Lastly, the maximum volume for every channel can be set indepentently. This prevents users (having volume access) going over the limit. This can help you to keep the system compliant with imposed regulations and maintain the good relationship with the neighbors.

EfficiencyThe switching mode power supply and Class-D Amplifier technology in combination with the auto-standby mode for each separate amplifier channel brings an end to the era of the power-hungry amplifiers. In addition, these features also result in a lightweight amplifier which benefits the customer when used in mobile applications.

Input 1

Input 2

Input 3

Input 4

OFFANALOGUEGAIN

INPUT SELECT

Level

AMPTEMP

CPU

DSP

VU READ

RS232

Front

USB

ADC

ADC

ADC

ADC

ADC

ADC

FUNCTIONProt

Clip

-20dB

Sig

CH1 CH2

POWERON

SMA750AUDAC

7 BandEQ

TimeAlignment

SpeakerProtection

SpeakerPresets

DynamicBassLimiter

DigitalAudio Filters

CHANNEL 1

CHANNEL 2

CHANNEL 3

CHANNEL 4

DAC

33

SMA SeriesWaveDynamics™ dual channel power amplifier

The SMA Series are dual channel (stereo) power amplifiers providing a new standard for affordable audio amplification in both fixed and mobile audio installations. Their advanced features and availability in different output powers for 350 Watt, 500 Watt and 750 Watt provide an enormous flexibility for numerous applications.

The WaveDynamics™ DSP processor in combination with the 2.5” LCD display gives an unmatched user experience with intuitive functions overview for easy configuration.

Acoustics can be optimized using Butterworth, Bessel and Linkwitz-Riley filters with selectable rolloff which can be configured as Low / High & Band Pass and the 7-Band equalizer which has adjustable frequencies and Q-factor. Other provided functions are delay and dynamic bass boost. These settings can be custom configured using the front panel of the amplifier, whereby access can be given on two different levels (User & Administrator) using password or USB-key protection. Loudspeaker protection is provided by an output power limiter whereby the maximum output power for every channel (in Watt) can be configured.

Configuration is made simple with loudspeaker presets and full system configurations which can be selected from a library and uploaded with an USB flash drive. This ensures the best acoustical performance with a bullet-proof loudspeaker protection.

A great input flexibility and source compatibility is provided by the input selection matrix in combination with the XLR and terminal block signal connections. The outputs are made using Speaker and Terminal block connections. System integration is made easy using the RS-232 control port.

• Lightweight Class D amplifier

• Advanced DSP & loudspeaker management

• Intuitive graphical interface on 2.5” LCD display

• Pre-loadable loudspeaker & set configurations

• Unmatched technology and affordability

• Flexible input and output configuration

• XLR & terminal block source compatibility

• RS-232 control and USB loadable configurations

Stereo @ 4 Ω Stereo @ 8 Ω Bridge @ 8 Ω THD+N Signal/Noise Freq Response Power supply Dimensions(W x H x D)

Weight

SMA350 2 x 350 Watt 2 x 220 Watt 700 Watt < 0.05% > 90 dB 20Hz - 20kHz 230 ~ 240 V AC / 50 Hz 482x88x420 mm 7.50 Kg

SMA500 2 x 500 Watt 2 x 300 Watt 1000 Watt < 0.05% > 90 dB 20Hz - 20kHz 230 ~ 240 V AC / 50 Hz 482x88x420 mm 7.75 Kg

SMA750 2 x 750 Watt 2 x 380 Watt 1500 Watt < 0.05% > 90 dB 20Hz - 20kHz 230 ~ 240 V AC / 50 Hz 482x88x420 mm 8.00 Kg

Technical Highlights

34

The SMQ Series are quad channel power amplifiers providing a new standard for affordable audio amplification in both fixed and mobile audio installations. Their advanced features and availability in different output powers for 350 Watt, 500 Watt and 750 Watt provide an enormous flexibility for numerous applications.

The WaveDynamics™ DSP processor in combination with the 2.5” LCD display gives an unmatched user experience with intuitive functions overview for easy configuration.

Acoustics can be optimized using Butterworth, Bessel and Linkwitz-Riley filters with selectable rolloff which can be configured as Low / High & Band Pass and the 7-Band equalizer which has adjustable frequencies and Q-factor. Other provided functions are delay and dynamic bass boost. These settings can be custom configured using the front panel of the amplifier, whereby access can be given on two different levels (User & Administrator) using password or USB-key protection. Loudspeaker protection is provided by an output power limiter whereby the maximum output power for every channel (in Watt) can be configured.

Configuration is made simple with loudspeaker presets and full system configurations which can be selected from a library and uploaded with an USB flash drive. This ensures the best acoustical performance with a bullet-proof loudspeaker protection.

A great input flexibility and source compatibility is provided by the input selection matrix in combination with the XLR and terminal block signal connections. The outputs are made using Speaker and Terminal block connections. System integration is made easy using the RS-232 control port.

• Lightweight Class D amplifier

• Advanced DSP & loudspeaker management

• Intuitive graphical interface on 2.5” LCD display

• Pre-loadable loudspeaker & set configurations

• Unmatched technology and affordability

• Flexible input and output configuration

• XLR & terminal block source compatibility

• RS-232 control and USB loadable configurations

SMQ SeriesWaveDynamics™ quad channel power amplifier

Stereo @ 4 Ω Stereo @ 8 Ω Bridge @ 8 Ω THD+N Signal/Noise Freq Response Power supply Dimensions(W x H x D)

Weight

SMQ350 4 x 350 Watt 4 x 220 Watt 2 x 700 Watt < 0.05% > 90 dB 20Hz - 20kHz 230 ~ 240 V AC / 50 Hz 482x88x420 mm 8.15 Kg

SMQ500 4 x 500 Watt 4 x 300 Watt 2 x 1000 Watt < 0.05% > 90 dB 20Hz - 20kHz 230 ~ 240 V AC / 50 Hz 482x88x420 mm 8.35 Kg

SMQ750 4 x 750 Watt 4 x 380 Watt 2 x 1500 Watt < 0.05% > 90 dB 20Hz - 20kHz 230 ~ 240 V AC / 50 Hz 482x88x420 mm 8.55 Kg

Technical Highlights

Prot

Clip

-20dB

Sig

CH1 CH2

ONPOWER

SMQ750AUDAC

CH1 CH2 CH3 CH4

CHANNEL 1 CHANNEL 2

CHANNEL 3 + 4BRIDGED

3 Channel example setup

35

• Class-D Technology

• High efficiency

• Convection cooled

• Light weight

• Single rackspace design (1 unit)

DPA152/252Dual channel Class D amplifiers (Stereo)

The DPA152 and DPA252 are two channel (stereo) Class D amplifiers capable of delivering a power up to 2 x 250 Watt.

The DPA amplifier series is designed to meet the requirements of various kinds of applications, ranging from standard stereo home applications to Multi-Zone distributed speaker systems.

They combine the best of all features in one single series of amplifiers, providing an outstanding sound quality with all the known advantages of Class D Amplifiers. Such as the excellent efficiency and very low heat dissipation. And because it's cooled passively, only a minimum of maintenance is needed, while ensuring maximum reliability.

The small size of a single rack space makes them very interesting for fixed rack mount as well as mobile applications.

It contains advanced protection circuitry which protects against DC malfunctioning, short circuit, overheating and overload.

The signal input connections are accommodated with balanced XLR connectors and signal link through with other amplifiers is possible using the XLR linkthrough connectors. The operation mode can be selected between Stereo mode, Bridge mode and Parallel mode.The output connections are accommodated with both Speakon and Euro-Terminal blocks.

36

Stereo @ 4 Ω Stereo @ 8 Ω Bridge @ 8 Ω THD+N Signal/Noise Freq Response Power supply Dimensions(W x H x D)

Weight

DPA152 2 x 150 Watt 2 x 80 Watt 300 Watt < 0.1% > 90 dB 20Hz - 20kHz 110~240V AC / 50~60 Hz 482x44x330 mm 4,37 Kg

DPA252 2 x 250 Watt 2 x 130 Watt 500 Watt < 0.1% > 90 dB 20Hz - 20kHz 110~240V AC / 50~60 Hz 482x44x330 mm 4,77 Kg

Technical Highlights

• Class-D Technology

• High efficiency

• Convection cooled

• Light weight

• Single rackspace design (1 unit)

DPA73/153Triple channel Class D amplifiers (Stereo + Sub)

The DPA73 and DPA153 are two channel (stereo) Class D amplifiers with an additional channel for powering a subwoofer cabinet. They are capable of delivering a power up to 2 x 150 Watt to the stereo channels and 300 Watt to the subwoofer channel.

The DPA amplifier series is designed to meet the requirements of various kinds of applications, ranging from standard stereo home applications to Multi-Zone distributed speaker systems.

They combine the best of all features in one single series of amplifiers, providing an outstanding sound quality with all the known advantages of Class D Amplifiers. Such as the excellent efficiency and very low heat dissipation. And because it's cooled passively, only a minimum of maintenance is needed, while ensuring maximum reliability.

The small size of a single rack space makes them very interesting for fixed rack mount as well as mobile applications.

It contains an active crossover network with a frequency of 120Hz and advanced protection circuitry which protects against DC malfunctioning, short circuit, overheating and overload.

The signal input connections are accommodated with balanced XLR connectors and signal link through with other amplifiers is possible using the XLR output connectors. The operation mode can be selected between Stereo mode, Bridge mode and Parallel mode. The output connections are accommodated with Euro-Terminal blocks.

37

Stereo @ 4 Ω Stereo @ 8 Ω Sub @ 8 Ω THD+N Signal/Noise Freq Response Power supply Dimensions(W x H x D)

Weight

DPA73 2 x 75 Watt 2 x 50 Watt 100 Watt < 0.1% > 90 dB 20Hz - 20kHz 110~240V AC / 50~60 Hz 482x44x330 mm 4,58 Kg

DPA153 2 x 150 Watt 2 x 80 Watt 150 Watt < 0.1% > 90 dB 20Hz - 20kHz 110~240V AC / 50~60 Hz 482x44x330 mm 4,83 Kg

Technical Highlights

• Class-D Technology

• High efficiency

• Convection cooled

• Light weight

• Single rackspace design (1 unit)

The DPA74 and DPA154 are four channel Class D amplifiers capable of delivering a power up to 4 x 150 Watt.

The DPA amplifier series is designed to meet the requirements of various kinds of applications, ranging from standard stereo home applications to Multi-Zone distributed speaker systems.

They combine the best of all features in one single series of amplifiers, providing an outstanding sound quality with all the known advantages of Class D Amplifiers. Such as the excellent efficiency and very low heat dissipation. And because it's cooled passively, only a minimum of maintenance is needed, while ensuring maximum reliability.

The small size of a single rack space makes them very interesting for fixed rack mount as well as mobile applications.

It contains advanced protection circuitry which protects against DC malfunctioning, short circuit, overheating and overload.

The signal input connections are accommodated with balanced XLR connectors. The operation mode can be selected between Stereo mode, Bridge mode and Parallel mode.

The output connections are accommodated with Euro-Terminal blocks.

DPA74/154Quad channel Class D amplifiers

38

Stereo @ 4 Ω Stereo @ 8 Ω Bridge @ 8 Ω THD+N Signal/Noise Freq Response Power supply Dimensions(W x H x D)

Weight

DPA74 4 x 75 Watt 4 x 50 Watt 2 x 150 Watt < 0.1% > 100 dB 20Hz - 20kHz 110~240V AC / 50~60 Hz 482x44x330 mm 4,57 Kg

DPA154 4 x 150 Watt 4 x 80 Watt 2 x 300 Watt < 0.1% > 100 dB 20Hz - 20kHz 110~240V AC / 50~60 Hz 482x44x330 mm 4,82 Kg

Technical Highlights

The DPA616 is a professional sixteen channel power amplifier. It is capable of delivering a power of 60 Watt to 4 Ohm loads connected to its 16 output channels. When used in bridge mode, it can deliver up to 120 Watt to 8 Ohm loads connected to the 8 bridged outputs, making the DPA616 the perfect solution for installed Multi-Zone audio distribution systems with 8 zones.

It is designed as a no-nonsense amplifier with only the necessary controls and connections, which creates great simplicity in use and installation.

The input connections are all performed with 3-pin Euro-Terminal block connectors, allowing balanced input signals. Each individual channel is fitted with a separate gain control potentiometer and each pair of input connectors can be set to Stereo / Bridge & Parallel using a switch to avoid cable clutter when distributing the input signal. Output connections are performed with 4-pin Euro-Terminal blocks allowing connections for separate or bridged output channels.

A built-in multipurpose protection circuit protects against DC malfunction, short circuit, overheating, overload, etc...

This all is housed in a double rack space, steel 19” rack mount housing.

DPA616Sixteen channel Class D amplifier

Stereo @ 4 Ω Stereo @ 8 Ω Bridge @ 8 Ω THD+N Signal/Noise Freq Response Power supply Dimensions(W x H x D)

Weight

DPA616 16 x 60 Watt 16 x 30 Watt 8 x 120 Watt < 0.1% > 100 dB 20Hz - 20kHz 110~240V AC / 50~60 Hz 482x88x322 mm 8,16 Kg

Technical Highlights

• 16 channel power amplifier

• Class-D Technology

• 16 x 60 Watt in Stereo mode

• 8 x 120 Watt in Bridge mode

• Stereo / Bridge & Parallel switch

• Euro Terminal block connectors

• Advanced Protection circuit

• 19” Mounting device

39

DPA154 TRU415

The TRU-series transformers are line transformer units, consisting of four toroidal line transformers, allowing low-impedance power amplifiers to be used for powering large public address audio systems with constant voltage levels of 100 Volt, 70 Volt and 50 Volt.

Each line transformer has a rated power of 150W or 250W depending on the model, with an input impedance selectable between 4 and 8 Ohm. The secundary side of the line transformer has power taps for use in 100 Volt, 70 Volt and 50 Volt audio distribution systems.

Unlike regular line transformer units, the TRU series units have a special internal decoupling network, which makes them suitable for use with Class-D power amplifiers.

The line transformers are housed in a solid constructed 19” rack mounting housing with a height of one or two units rackspace. The connections for both in and output are performed using reliable Euro- Terminal blocks.

TRU4 Series4 Channel line transformer units

Output Power Output Tap @ 100V

Output Tap @ 70V

Output Tap @ 50V

Freq Response 19” Unit Height Dimensions(W x H x D)

Weight

TRU415 4 x 150 Watt 66,7 Ohm 33,3 Ohm 16,7 Ohm 35Hz - 20kHz 1U 482x44x322 mm 13,2 Kg

TRU425 4 x 250 Watt 40 Ohm 20 Ohm 10 Ohm 35Hz - 20kHz 1U 482x44x322 mm 16,6 Kg

Technical Highlights

• 4 Channel Line transformer unit

• 150W or 250W each channel

• Input impedance of 4 or 8 Ohm

• Output power taps for 100V, 70V and 50V

• Decoupling network for Class-D Amplifiers

• Connections with Euro-Terminal Blocks

• 19” Rackmount

• 1 or 2 units rackspace

100VOLT

4OHM

40

TRU812

R2

The TRU812 is a line transformer units, consisting of eight toroidal line transformers, allowing low-impedance power amplifiers to be used for powering large public address audio systems with constant voltage levels of 100 Volt, 70 Volt and 50 Volt.

Each line transformer has a rated power of 120 Watt, with an input impedance selectable between 4 Ohm and 8 Ohm. The secundary side of the line transformer has power taps for use in 100 Volt, 70 Volt and 50 Volt audio distribution systems.

Unlike regular line transformer units, the TRU series has a special internal decoupling network which make them suitable for use with Class-D power amplifiers.

The line transformers are housed in a solid constructed 19” rack mounting housing with a height of two units rackspace. The connections for both in and output are performed using reliable Euro- Terminal blocks.

TRU8128 Channel line transformer unit

Output Power Output Tap @ 100V

Output Tap @ 70V

Output Tap @ 50V

Freq Response 19” Unit Height Dimensions(W x H x D)

Weight

TRU812 8 x 120 Watt 83,3 Ohm 41,7 Ohm 20,8 Ohm 20Hz - 20kHz 2U 482x88x322 mm 21 Kg

Technical Highlights

• 8 Channel Line transformer unit

• 120 W each channel

• Input impedance of 4 or 8 Ohm

• Output power taps for 100V, 70V and 50V

• Decoupling network for Class-D Amplifiers

• Connections with Euro-Terminal Blocks

• 19” Rackmount

• 2 units rackspace

100VOLT

8OHM

41

Definition of AUDAC amplifier classesAmplification is necessary to make a small signal audible through a loudspeaker, Voltage and Current gain are added to a source signal to move the loudspeaker. Various amplification concepts have been developed throughout the past decades, each of them with specific properties concerning the sound quality and efficiency.

All amplifiers are classified in several classes determined by the construction of the output stage, each class with its own specific functions and features. The names of the classes are indicated with different letters , starting with the letter A. Subsequent developments are indicated with subsequent letters.

Here is a brief description and a short comparision of the different amplifier classes occurring in the AUDAC product range.

Class ABClass AB amplifiers are the most common design type found in audio power amplifiers. As the name suggests, it consists of a composition between a Class A and Class B amplifier. Two complementary transistors are used in a push-pull configuration, each of them amplifying opposite halves of the input signal, which are recombined at the output. To minimize the distortion at the point both transistors take over from each other (crossover point), a small quiescent current flows through both transistors which eleminate each other, thus conducting slightly more than half a period, resulting in a minimized distortion. The Class AB design gives a good efficiency which in most cases depending of the input signal and level is situated between 35% and 60%.

Class DClass D amplifiers, sometimes also called "Digital Amplifiers" are switching amplifiers. This means the output is quickly switched on and off through pulse width modulation (PWM), at a very high frequency. Since the output is either completely switched on or completely switched off, theoretically no power is wasted. In reality, lossless and infinitely fast switching doesn't exists, so there's always a little of power wasted. But Class D amplifier efficiency is about 90% or more, which is much higher than any other amplifier classes. Adding a switching power to the switching output stage, will reduce the weight of the amplifier.No heavy transformers are required and the heat production is low, eliminating heavy heatsinks or fans, resulting in a lightweight amplifier. Nowadays, very good sounding Class D amplifiers are available on the market, for all different kinds of applications.

Class HClass H amplifiers are a variety of amplifiers based on Class AB design, whereby the efficiency is increased and the power dissipation is reduced while ensuring a minimum of distortion. This is done by means of some spe-cific techniques such as monitoring the output signal and adjusting the power supply rails accordingly, resulting in a supply rail with infinitely variable levels. Hereby the supply rail is always only a few volts higher than the output signal, resulting in an output stage which operates at maximum efficiency all the time. While the efficiency of a Class AB depends of the input signal and the level, a Class H amplifier can always maintain the same efficiency level around 60%.

+Vss

+Vs

0

-Vs

-Vss

t

Class H

Audio

Triangle

Output

Audio

TriangleOutput

42

NAC Houthalen-Helchteren, Belgium runs on AUDAC

43

100VOLT

4OHM

Doorbell Sensor

TelephonePager

Paging Microphone

Paging Microphone

5 individual controllable100V output zonesup to 240 Watt

Tuner + MP3

COM24

COM SeriesPublic address amplifiersThe COM series amplifiers are easy to use, flexible and multi-functional public address amplifiers with a modern design and equipped with all the necessary control functions and connection possibilities. Depending on the type of amplifier, some additional features are provided. Such as the possibility to connect a telephone paging unit, an integrated chime module or a remote microphone input. They are perfect to be used in commercial applications such as restaurants, hotels, shops, warehouses, professional offices, public buildings,..

Typical applicationAs a simple example, when installed in a shop, you could connect a tuner to play your favourite radio-station, a microphone to make announcements, a telephone pager, and of course the shop's doorbell.

44

COM3/6Public address amplifier

• Class AB amplifier technology

• 2 Stereo mic / line inputs

• 1 Microphone input

• 100V / 70V / 25V outputs

• 4 Ω output

• Telephone paging input (priority)

• Bass and treble tone control (2-Band)

The COM3 and COM6 are public address amplifiers with a power of up to 60 W. They are equipped with 2 unbalanced stereo line level inputs, which are switchable between Line and Mic level and one Microphone level Input. This way, a maximum of 3 balanced microphones can be connected.

The output level is selectable between high impedance 100V, 70V and 25V outputs, or 4 Ohm low impedance. It is equipped with an advanced protection circuit, which protects against DC short circuit, overheating, overload and limits the signal when necessary.

All control functions such as individual channel volume controls, a 2 band tone control, the master volume control and indicators like a VU LED bar and clipping leds are located at the front of the amplifier.

• Optional COM6MB Mounting Bracket

45

RMS Power(100V / 4 Ω)

Freq Response THD+N Signal / Noise Output Voltage / Impedance Power supply Dimensions(W x H x D)

Weight

COM3 30 Watt 80Hz - 18kHz < 1% > 100 dB 100V / 70V / 25V / 4 Ω 240 V AC / 50-60 Hz 270x76x230 mm 4,5 Kg

COM6 60 Watt 80Hz - 18kHz < 1% > 100 dB 100V / 70V / 25V / 4 Ω 240 V AC / 50-60 Hz 270x76x230 mm 5,25 Kg

Technical Highlights

COM12/24Public address amplifier

The COM12 and COM24 are public address amplifiers, with a power up to 240 Watt . They are designed with a wide variation of input possibilities for all kinds of connection purposes, such as 2 unbalanced stereo line level inputs which are switchable between Mic / Line level, 4 balanced Mic / Line inputs with phantom power whereof 2 are performed using XLR / Jack hybrid connectors and containing priority.

The output signal is available on 5 high impedance 100V mono output zones or one low impedance 4 Ohm mono output. Other present features are a link in- and output, an amp input and pre-amp output, an integrated chime module, a remote microphone input and the possibility to connect a telephone pager unit.

It is equipped with an advanced protection circuit, which protects against DC short circuit, overheat, overload and limits the signal when necessary. All control functions such as channel selection and volume controls, a 2 band tone control, the master volume control and indicators like a VU LED bar and clipping LED’s are located at the front of the amplifier.

• 5 x 100V selectable output zones

• Low impedance 4 Ω output

• 2 Stereo unbalanced line level inputs

• 2 Mono balanced line / mic level inputs

• 2 Mono balanced line / mic level inputs with priority

• 15V Phantom power on 4 balanced mic inputs

• Up to 6 microphones

• Bass and treble tone control (2-Band)

• Telephone paging input (priority line input)

• Included 19" Mounting Bracket

46

RMS Power(100V / 4 Ω)

Freq Response THD+N Signal / Noise Output Voltage / Impedance Power supply Dimensions(W x H x D)

Weight

COM12 120 Watt 20Hz - 20kHz < 0.5% > 90 dB 100V / 4 Ω 240 V AC / 50-60 Hz 420x86x320 mm 9.7 Kg

COM24 240 Watt 20Hz - 20kHz < 0.5% > 90 dB 100V / 4 Ω 240 V AC / 50-60 Hz 420x86x320 mm 11 Kg

Technical Highlights

The CPR12 is an easy to use, flexible and multifunctional 10 channel preamplifier. Six of these input channels are selectable between Mic / Line level and equipped with a 3 band tone control. All of these Mic inputs can be switched to phantom power while the first two can also be switched to priority. The other four channels are stereo line inputs.

Every input channel has its own gain and fader volume control with PFL button which makes it possible to pre-listen each input or output channel with the built-in pre-listening speaker, and can be routed to one or both output zones. This makes the CPR12 a full two-zone system.

Other present features are a priority input, a recording output and a 24 Volt emergency power connection.

This last feature makes it possible to power the CPR12 with emergency power when the main power is shut down. A sub-out and insert connections allow the connection of additional devices such as equalizers.

• Total of 10 audio inputs

• 6 x Mic / line inputs with 3-band EQ and phantom power

• 2 x Mic / line inputs containing priority

• 15V Phantom power on 6 balanced Mic inputs

• 4 Line Inputs

• Fader volume control

• Two zone system

• Built-in pre-listening speaker

• Priority input

• Works on 24V emergency power

CPR1210 Channel - 2 zone preamplifier

24VOLT

Also available:CPE100Rack Mount Handles

47

Freq Response THD+N Signal / Noise Phantom power Emergency power Power supply Dimensions(W x H x D)

Weight

CPR12 20Hz - 20kHz < 0.2% > 90 dB 15V 24V DC 100 - 240 V AC / 50-60 Hz 420x88x320 mm 5.3 Kg

Technical Highlights

Also available:CPE100Rack Mount Handles

The CPA Series are professional 100V Single-Channel Power Amplifiers with a power up to 360 Watt, especially designed for most common 100V PA systems. They are designed as no-nonsense amplifiers with only the necessary controls and connections, which creates great simplicity in use and installation.

Several power output taps available for use in 100V, 70V and even 4 Ohm Low impedance installations. Another present feature is the 24 V DC connection for powering the amplifier with emergency power when the main power is shut down.

A built-in multipurpose protection circuit protects against DC malfunction, Short circuit, overheating, overload and limits the signal when necessary.

The input connection is performed using a balanced XLR connector and a link output connectors is provided for link through to other amplifiers. In addition, a high-pass filter switch (400 Hz) and a gain adjustment potentiometer are provided.

The output connection is performed using reliable terminal block connectors and this all is housed into a solid constructed, double rack space (2 HE) 19” rack mounting housing.

• Single channel 100V amplifier

• Class AB amplifier technology

• Signal link-through

• Advanced protection circuit

• High-pass Filter

• Limiter

CPA Series100V Power amplifiers

24VOLT

48

RMS Power(100V / 4 Ω)

Freq Response THD+N Signal / Noise Output Voltage / Impedance Power supply Dimensions(W x H x D)

Weight

CPA12 120 W 70Hz - 18kHz < 1% > 90 dB 100V / 70V / 4 Ω 100 - 240 V AC / 50-60 Hz 482x88x340 mm 11.65 Kg

CPA24 240 W 70Hz - 18kHz < 1% > 90 dB 100V / 70V / 4 Ω 100 - 240 V AC / 50-60 Hz 482x88x340 mm 13.87 Kg

CPA36 360 W 70Hz - 18kHz < 1% > 90 dB 100V / 70V / 4 Ω 100 - 240 V AC / 50-60 Hz 482x88x340 mm 15.16 Kg

Technical Highlights

The CAP Series are professional 100V Multi-Channel Power Amplifiers, containing various models with different channels and different output power configurations. The dual channel versions are available in two different power ratings with an output power of 240 and 480 Watt. This way, a flexible solution is created for Multi-Zone audio distribution systems with two or more independent zones.

They are designed as no-nonsense amplifiers with only the necessary controls and connections, which creates great simplicity in use and installation. A high efficiency and reliability of the devices is achieved by using switching power supplies in combination with Class-D Amplifier technology. A temperature controlled fan constantly keeps all parts within the right operation range, while avoiding an excessive buzz. A built-in multipurpose protection circuit protects against DC malfunction, Short circuit, overheating, overload and limits the signal when necessary.

The input connections are performed using balanced XLR connectors and link output connectors are provided for link through to other amplifiers. In addition, a high-pass filter switch (400 Hz) and a gain adjustment potentiometer are provided for each channel.

The output connections are performed using reliable terminal block connectors and this all is housed into a solid constructed, double rack space (2 HE) 19” rack mounting housing.

• 2 Channels

• Class D amplifier technology

• High efficiency

• Signal link-through

• Advanced protection circuit

• Temperature controlled fan

• High-pass Filter

• Limiter

RMS Power(100V )

Freq Response THD+N Signal Noise Output Voltage / Impedance Power Supply Dimensions Weight

CAP224 2 x 240 Watt 50Hz-18kHz <0.3% > 90dB 100V 100-240V/50 Hz 482 x 88 x 420 mm 10.5 Kg

CAP248 2 x 480 Watt 50Hz-18kHz <0.3% > 90dB 100V 100-240V/50 Hz 482 x 88 x 420 mm 10.8 Kg

Technical Highlights

CAP SeriesDual channel 100V power amplifiers

Also available:CPE100Rack Mount Handles

49

The CAP Series are professional 100V Multi-Channel Power Amplifiers, containing various models with different channels and different output power configurations. The quad channel versions are available in three different power ratings with an output power of 120 Watt, 240 Watt and 480 Watt. This way, a flexible solution is created for Multi-Zone audio distribution systems with four or more independent zones.

They are designed as no-nonsense amplifiers with only the necessary controls and connections, which creates great simplicity in use and installation. A high efficiency and reliability of the devices is achieved by using switching power supplies in combination with Class-D Amplifier technology. A temperature controlled FAN constantly keeps all parts within the right operation range, while avoiding an excessive buzz. A built-in multipurpose protection circuit protects against DC malfunction, Short circuit, overheating, overload and limits the signal when necessary.

The input connections are performed using balanced XLR connectors and link output connectors are provided for link through to other amplifiers. In addition, a high-pass filter switch (400 Hz) and a gain adjustment potentiometer are provided for each channel.

The output connections are performed using reliable terminal block connectors and this all is housed into a solid constructed, double rack space (2 HE) 19” rack mounting housing.

• 4 Channels

• Class D amplifier technology

• High efficiency

• Signal link-through

• Advanced protection circuit

• Temperature controlled fan

• High-pass Filter

• Limiter

CAP SeriesQuad channel 100V power amplifiers

RMS Power(100V )

Freq Response THD+N Signal Noise Output Voltage / Impedance Power Supply Dimensions Weight

CAP412 4 x 120 Watt 50Hz-18kHz <0.3% > 90dB 70V / 100V / 4 Ω 100-240V/50 Hz 482 x 88 x 420 mm 14.8 Kg

CAP424 4 x 240 Watt 50Hz-18kHz <0.3% > 90dB 100V 100-240V/50 Hz 482 x 88 x 420mm 11.5 Kg

CAP448 4 x 480 Watt 50Hz-18kHz <0.3% > 90dB 100V 100-240V/50 Hz 482 x 88 x 420 mm 12.0 Kg

Technical Highlights

Also available:CPE100Rack Mount Handles

50

100 V Systems100 Volt audio technique is still an unclear concept for many people, although it is an ideal and technically reliable solution for a wide variation of applications.

When we look at a 100V audio distribution system, the maximum allowed capacity is determined by the maximum power the amplifier is capable of delivering.

For example, when we have an 100V amplifier with a maximum power of 120 Watt, the following can be connected: 10 speakers of 6 Watt plus 4 speakers of 10 Watt and one speaker of 20 Watt. The speaker configuration can be freely chosen, as long as the given power of the amplifier is not exceeded.

In practice it is advisable to choose an amplifier which is 10% over-dimensioned. When some speakers in this system are switched on and off, the other speakers in this 100V audio distribution system continue playing at the same volume as before. This makes it possible to control the volume for each individual speaker in this system with a volume control, without influencing the volume of the other speakers.

The power is determined by the speakers impedance. When we look at the impedance list, we notice that there is a large difference between the speaker impedances. The speakers that are used, are standard 4 or 8 Ohm speakers equipped with a transition transformer with several power tappings on the 100V side. therefore, the power of the connected speaker can be selected between several rates, for example: 6 Watt, 3 Watt, 1.5 Watt. This can be very useful in some applications such as small rooms like toilets.

A known disadvantage of the old 100V audio distribution systems was the limited bandwidth, resulting in a less enjoyable sound. Mostly this was due to the poor quality of the transformers and amplifiers. In the modern 100V systems this belongs to the past, covering the full audio bandwidth and providing a sound quality that cannot be distinguished from a Hi-fi audio system.

In the impedance list, there are next to 100V values also 70V and 50V values displayed. This is done because many 100V amplifiers also have output terminals for 70V and 50V. The power at a constant voltage of 70V is half the power of a constant voltage of 100V, and the power at a constant voltage of 50V is half the power of a constant voltage of 70V.

This can be useful in applications where the power of the amplifier is maximum in use, but the volume can be raised. In this application, the amplifier can be switched to 70V, which means that all the speakers are playing at half the volume, and the number of speakers can be doubled.

51

Impedance 100 Volt 70 Volt 50 Volt

20.000 Ohm 0.5 Watt 0.25 Watt 0.12 Watt

10.000 Ohm 1 Watt 0.5 Watt 0.25 Watt

5.000 Ohm 2 Watt 1 Watt 0.5 Watt

3.333 Ohm 3 Watt 1.5 Watt 0.75 Watt

2.500 Ohm 4 Watt 2 Watt 1 Watt

2.000 Ohm 5 Watt 2.5 Watt 1.25 Watt

1.666 Ohm 6 Watt 3 Watt 1.5 Watt

1.000 Ohm 10 Watt 5 Watt 2.5 Watt

666 Ohm 15 Watt 7.5 Watt 3.75 Watt

500 Ohm 20 Watt 10 Watt 5 Watt

400 Ohm 25 Watt 12.5 Watt 6.25 Watt

333 Ohm 30 Watt 15 Watt 7.5 Watt

250 Ohm 40 Watt 20 Watt 10 Watt

200 Ohm 50 Watt 25 Watt 12.5 Watt

166 Ohm 60 Watt 30 Watt 15 Watt

133 Ohm 75 Watt 37.5 Watt 18.75 Watt

100 Ohm 100 Watt 50 Watt 25 Watt

83 Ohm 120 Watt 60 Watt 30 Watt

66 Ohm 150 Watt 75 Watt 37.5 Watt

50 Ohm 200 Watt 100 Watt 50 Watt

42 Ohm 240 Watt 120 Watt 60 Watt

Impedance list

Active audio transceiversThe active audio transceivers allows the user to expand the sound system with additional in- and output modules integrated into the wall. There are two different input modules available, with RCA connectors for a Line level, and with an XLR connector for microphone signals. The input modules feature a small internal amplifier, to route the signal to the output module without any interference or loss.

The signal will be transmitted over UTP CAT5 cabling, and at the receiver end the APG20 receiver gateway has to be installed. The APG20 converts the transmitted audio signals back into signals corresponding the Line and Microphone levels, and makes them available on RCA and XLR connectors, which can be directly connected to your mixer or amplifier. The power supply required for the internal amplifier (24V) of the input modules is provided by the APG20 over the UTP cabling.

The construction of the input modules is made of sturdy ABS, and is therefore suitable for big projects in industrial buildings as well as for standard applications in home design interiors. The input modules are available in black (/B) and white (/W), and are available in two different sizes, compatible with Audac, Niko and standard U40 installation materials or with BTicino Livinglight installation materials.

WLI18/22Wall line input unit

WMI18/22Wall microphone input unit

The WLI are flush mountable Wall Line Input Units, which can be integrated into several kinds of installation materials for system integration.

They are fitted with two RCA connectors (stereo) on the front side and a terminal block connector on the rear side. The signal which is applied to the input connections is converted to a differential dual mono signal with increased voltage levels. This way, the signal is made insensitive to interferrence and noise and can be transferred over a long distance without any loss of quality. This allows reliable signal transmission up to 300 meters over CAT5E (or better) twisted pair cabling.

It should be used in combination with a matching device on the receiver end.

The WMI are f lush mountable Wall Microphone Input Units, which can be integrated into several kinds of installation materials for system integration.

They are fitted with a Female XLR input connector on the front side and a terminal block connector on the rear side. The signal which is applied to the input connection is converted to a differential signal with increased voltage levels. This way, the signal is made insensitive to interferrence and noise and can be transferred over a long distance without any loss of quality. This allows reliable signal transmission up to 300 meters over CAT5E (or better) twisted pair cabling. A jumper on the rear side allows enabling of 15 Volts phantom power.

It should be used in combination with a matching device on the receiver end.52

APG20Receiver gateway

The APG20 is a receiver gateway, designed to be used in combination with the Wall Line Input (WLI) and Wall Microphone Input (WMI) flush mount wall input units.

It converts the signal transmitted over UTP CAT5 cabling into signals corresponding Line and Microphone levels, and makes them available on RCA and XLR connectors. Stereo line signal is converted into dual mono signal.

The maximum distance that can be covered between the input unit and the receiver gateway is 300m. By adding a ARJ03P junction box half way along the cabling, which provides the required power supply for the input units, the maximum distance can be extended to 600 meters.

Typical application APG20Receiver Gateway

UTPCAT5

UTPCAT5

UTPCAT5

UTPCAT5

UTPCAT5

UTPCAT5

Wall panel controller

DW3020Wall panel controller

Wall lineInput unit

WLIWall lineInput unit

WMIWall Micro

Phone Input

WMIWall Micro

Phone Input

RS-485 data transfer linkthrough

Line andmicrophone

outputs

Prog.

Vol+

-

+

-

Prog.

Vol+

-

+

-Zone 2 Zone 3 Zone 4 Zone 5 Zone 6 Zone 7 Zone 8 MTX88Zone 1

53

Campus Delghust, Ronse, Belgium, runs on AUDAC

LIM012Balanced stereo limiterThe LIM012 is a small and easy to use stereo sound limiter to protect your sound system, and comply with the restrictions imposed by law.Both channels work separately, whereby it can be used as a stereo or 2 x mono limiter.

The signal level can be set by a rotary switch to 6 different levels: 0 dBV, -6 dBV, -12 dBV, -18 dBV, -24 dBV and -30 dBV.

When the output level reaches the set value, the signal will be attenuated and a corresponding LED on the front lights up. When the output level becomes lower than the set value, the attenuation will be slowly reduced until the output signal has the same value as the input signal.

It works on a power supply voltage of 24 V DC. (PSD242 power supply is included)

Optional MBS200 Mounting bracket

54

Level Range THD+N Signal / Noise Freq Response Power supply Dimensions(W x H x D)

Weight

LIM012 0 dBV to -30 dBV < 0.15% < -90 dB 20Hz - 20 kHz 24 V DC - PSD242 110x44x160 mm 470 g

Technical Highlights

MVF16Voice-file Interface (Contact input to RS232 interface)

The MVF16 is a Multi Voice File interface, designed to be used in combination with the InterM PV-632 Multi Voice File Player. This combination makes it possible to play voice messages, warning signals or other signals when a signal is applied to one of the MVF16’s input contacts.

The standard configuration provides one fire alarm contact, 13 regular contacts to select the corresponding message file and two open collector outputs which can be used to switch a relay.

While this interface is designed to be used with a specific device, it can also be used for innumerable other applications, requiring contact inputs to an RS232 output.

For powering this interface box, a 24 Volt DC power supply is required. (optional PSD242)

55

56

XENO SeriesFull range loudspeaker cabinet

The XENO series is a loudspeaker range specifically designed for fixed audio installations in modern environments, offering two dif-ferent sizes of contemporary and elegant designed products. What makes them so unique is their full range audio design, allowing them to be used without additional bass cabinet. Horizontal coverage: 100°, Vertical Coverage: 100°.All Xeno series speakers are available in black (/B) or white (/W)

The included mounting bracket makes it possible to mount the speaker in both horizontal and vertical position, making it suitable for every application.Optional WBP100 wall back plates are available for making it easier to mount the XENO series speakers on specific surfaces (brick, drywall,...)Transportation flightcase optional available (FCLS8).

WBP100 (Optional)

Mounting Bracket(Included)

XENO 6The XENO 6 is the 6” version, featuring a 1” dome tweeter and a 6” Mid / Low frequency driver, ensuring a high-fidelity sound enclosed in a wooden cabinet.

This makes the loudspeaker suitable for venues such as design interiors in residential applications or even contemporary retail stores and restaurants where a clear background sound is desired. But the XENO 6 also shines in clubs and pubs were the sound goes up after the sun goes down.

It delivers a powerful full range of sound with an RMS rating of 80 Watt, and a maximum of 160 Watt. The advanced Integrated protection circuit avoids tweeter damaging when overload occurs.

XENO 8The XENO 8 is the 8” version, with a 1” dome tweeter and a 8” Mid / Low frequency driver, ensuring a true-to-nature, high-fidelity reproduction of music and speech. This wooden cabinet is fitted with a slim and elegant front grill.

This makes the loudspeaker suitable for environments where the music is the key element, but without making any compromises on its design. This ranges from modern and trendy clubs to pubs and dance bars where that little extra punch and depth in the music is appreciated.

It delivers a powerful full range sound with an RMS rating of 120 Watt, and a maximum of 240 Watt. The advanced integrated protection circuit avoids tweeter damage.

Rotatable logo design for horizontal and vertical mounting

Max Power RMS Power Max SPL Sensitivity1W / 1m

Impedance Frequency Response±3 dB

Dimensions(w x H x D)

Weight

XENO 6 160 W 80 W 110 dB 88 dB 8 Ω 65 Hz - 18 kHz 210 x 345 x 220 mm 5,32 Kg

XENO 8 240 W 120 W 110 dB 89 dB 8 Ω 60 Hz - 18 kHz 250 x 380 x 262 mm 6,5 Kg

Technical Highlights

WBP100 (Optional)

Mounting Bracket(Included)

• 1" Compression horn tweeter

• 100° x 80° coverage (rotatable)

• Tweeter protection circuitry

• High efficiency 8" Mid/Low woofer

• Speaker input connections (& Linkthrough)

• Included mounting bracket

• 35 mm pole adapter option

57

VEXO 8Compact high power loudspeaker

The VEXO8 is a high-output loudspeaker cabinet, featuring an 8" high efficiency mid/low range driver and 1" compression driver fitted with a 100° x 80° coverage horn, providing a powerful and detailed sound in a compact cabinet.

The exceptional accuracy and clarity coming from this compact cabinet is recommended to be extended with a complementary bass cabinet adding the punchy & deep bass, resulting in a stunning sound over the entire frequency range.

Their elegant enclosure allows them to be used in modern & trendy installation applications such as bars and nightclubs, while their functional features make them perfect for use in compact mobile systems.

Connections are made using two speaker connectors allowing linkthrough to other cabinets. Mounting in both horizontal and vertical direction is possible with the included wall bracket and the rotatable horn. An optional 35 mm pole adapter can be installed when used in mobile applications. Compression driver overload protection is provided through an internal limiting circuit.

Compact high power loudspeakerCompact high power loudspeaker

Max Power RMS Power Max SPL Sensitivity1W / 1m

Impedance Frequency Response±3 dB

Dimensions(w x H x D)

Weight

VEXO 8 350 Watt 175 Watt 115 dB 92 dB 8 Ω 65 Hz - 20 kHz 210 x 345 x 220 mm 9.70 Kg

Technical Highlights

PX SeriesIndoor speakersThe PX series are full range cabinets for a wide variation of fixed indoor installation applications. There are 4 different models to guarantee the most appropriate and cost effective combination for every situation. They deliver a clear and natural sound which will be highly appreciated in all situations. The enclosure is made of medium density wood with a durable scratch proof EPDM coating.

The MK2 versions of the PX speaker range have an improved tweeter and are fitted with a completely redesigned filter and protection network. This provides a warmer and more detailed sound and a bulletproof protection against tweeter overload.

PX108 MK2

The PX108 MK2 is the 8" version of the PX family with a power of 150 Watt RMS.

It is equipped with an 1" HF driver and an 8" medium frequency range loudspeaker. A passive crossover network and tweeter overload protection circuit are integrated. Ergo grips, rigging points and speaker pole adapter are provided to facilitate handling and mounting

Horizontal coverage: 90°Vertical Coverage: 60°(Rotatable)

PX110 MK2

The PX110 MK2 is the 10" version of the PX family with a power of 180 Watt RMS.

It is equipped with an 1" HF driver and an 10" medium frequency range loudspeaker. A passive crossover network and tweeter overload protection circuit are integrated. Ergo grips, rigging points and speaker pole adapter are provided to facilitate handling and mounting.

Horizontal coverage: 90°Vertical Coverage: 60°(Rotatable)

58

Max Power RMS Power Impedance Max SPL Sensitivity1W / 1m

Frequency Response±3 dB

Frequency Range-10 dB

Dimensions(W x H x D)

Weight

PX108 MK2 300 Watt 150 Watt 8 Ω 117 dB 95 dB 95Hz - 18kHz 70Hz - 20kHz 290x505x300 mm 14 Kg

Technical Highlights

Max Power RMS Power Impedance Max SPL Sensitivity1W / 1m

Frequency Response±3 dB

Frequency Range-10 dB

Dimensions(W x H x D)

Weight

PX110 MK2 350 Watt 180 Watt 8 Ω 120 dB 98 dB 80Hz - 18kHz 65Hz - 20kHz 315x545x320 mm 17 Kg

Technical Highlights

PX112 MK2

The PX112 MK2 is the 12" version of the PX family with a power of 300 Watt RMS. It is equipped with a 1.3" HF driver and a 12" medium frequency range loudspeaker.

A passive crossover network and tweeter overload protection circuit are integrated. Ergo grips, rigging points and speaker pole adapter are provided to facilitate handling and mounting.

Horizontal coverage: 90°Vertical Coverage: 75°(Rotatable)

PX115 MK2

The PX115 MK2 is the 15" version of the PX family with a power of 300 Watt RMS. It is equipped with a 1.3" HF driver and a 15" medium frequency range loudspeaker.

A passive crossover network and tweeter overload protection circuit are integrated. Ergo grips, rigging points and speaker pole adapter are provided to facilitate handling and mounting.

Horizontal coverage: 90°Vertical Coverage: 75°(Rotatable)

59

Max Power RMS Power Impedance Max SPL Sensitivity1W / 1m

Frequency Response±3 dB

Frequency Range-10 dB

Dimensions(W x H x D)

Weight

PX112 MK2 600 Watt 300 Watt 8 Ω 125 dB 100 dB 70Hz - 19kHz 55Hz - 20kHz 385x645x420 mm 31 Kg

Technical Highlights

Max Power RMS Power Impedance Max SPL Sensitivity

1W / 1mFrequency Response

±3 dBFrequency Range

-10 dBDimensions

(W x H x D) Weight

PX115 MK2 600 Watt 300 Watt 8 Ω 125 dB 100 dB 60Hz - 19kHz 45Hz - 20kHz 435x765x495 mm 34 Kg

Technical Highlights

RX112 MK2

The RX112 MK 2 is the 12" version of the RX family with a power of 300 Watt RMS.

Along the 12" high power low frequency loudspeaker, it also contains a 1.3" HF compression driver, a passive crossover network and a tweeter overload protection circuit.

There’s an ergo grip on top of the speaker for easy handling, and the mounting can be done with the built-in 35mm speaker pole adapter and 12 rigging points.

Horizontal coverage: 90°Vertical Coverage: 75°(Rotatable)

RX SeriesRoad speakersThe RX series are full range speaker cabinets with a solid plywood enclosure and a durable scratch free EPDM coating, this makes them excellent for in- and outdoor road applications. With their multi-angled shape they can be used arrayed, on a speaker stand, standing upright and as floor monitor.

The sound produced by these speakers is clear and natural, and will be appreciated in all situations.

The newly introduced MK2 versions of the RX speaker range have an improved tweeter and are fitted with a completely redesigned filter and protection network. This provides a warmer and more detailed sound and a bulletproof protection against tweeter overload.

60

Max Power RMS Power Impedance Max SPL Sensitivity1W / 1m

Frequency Response±3 dB

Frequency Range-10 dB

Dimensions(W x H x D)

Weight

RX112 MK2 600 Watt 300 Watt 8 Ω 124 dB 99 dB 75Hz - 18kHz 60Hz - 20kHz 395x620x345 mm 23 Kg

Technical Highlights

RX115 MK2

The RX115 MK2 is the 15" version of the RX family with a power of 300 Watt RMS. Along the 15" high power low frequency loudspeaker, it also contains a 1.3" HF compression driver, a passive crossover network and a tweeter overload protection circuit.

There’s an ergo grip on top of the speaker for easy handling, and the mounting can be done with the built-in 35mm speaker pole adapter and 12 rigging points.

Horizontal coverage: 90°Vertical Coverage: 75°(Rotatable)

61

Max Power RMS Power Impedance Max SPL Sensitivity1W / 1m

Frequency Response±3 dB

Frequency Range-10 dB

Dimensions(W x H x D)

Weight

RX115 MK2 600 Watt 300 Watt 8 Ω 126 dB 101 dB 62Hz - 18kHz 50Hz - 20kHz 450x720x390 mm 29 Kg

Technical Highlights

CPB SeriesSpeaker cover bagsThe CPB series speaker bags are heavy duty and splash waterproof speaker bags especially designed for the protection and handling of the AUDAC PX and RX series speakers in all possible situations.

The design ensures that it’s possible to: reach the connections, place the speaker on a stand and carry the speaker using the speaker handles, even when the cover bag is attached.

When not in use, all these openings can be covered with a stitched flap from the same material.

The front of the bag can be opened with a zipper to use the speaker without removing the bag, and during transportation and storage, the front can be closed to avoid any damage to the speaker.

The bags are made of extra strong, water repellent polyester with heavy duty stitching and are finished with small rubber feet. The inside has a special soft coated protection to avoid structural damages.

MBK SeriesSpeaker mounting brackets

Every speaker of the RX and PX series has a specific designed cover bag:

• CPB108P: Cover bag for PX108

• CPB110P: Cover bag for PX110

• CPB112P: Cover bag for PX112

• CPB115P: Cover bag for PX115

• CPB112R: Cover bag for RX112

• CPB115R: Cover bag for RX115

Every speaker of the PX range has a special designed bracket:

• MBK108: Mounting bracket for PX108

• MBK110: Mounting bracket for PX110

• MBK112: Mounting bracket for PX112

• MBK115: Mounting bracket for PX115

The MBK1XX series mounting brackets are especially designed for the mounting of the PX series speakers, allowing to mount the speakers in a simple and secure way on any wall or ceiling.

They are constructed of solid steel, and come with all the necessary parts for safe mounting, such as a screw flange adapter to replace the speaker’s pole flange adapter in the bottom of the speaker, 2 x M10 bolts and a safety cable with M10 eye bolt mounting.

Available in black (B) and white (W).).

62

Sentower, Opglabbeek Belgium runs on AUDAC

SX SeriesBass cabinets

The SX series are tandem ported subwoofers designed to produce a powerful true-to-nature bass without any loss of clarity and sound quality. They are carefully designed and tuned to produce a high power low frequency sound with exceptional low distortion levels and a flat frequency response at low frequencies.

They provide an accurate bass which sounds real and will not draw attention to itself when integrated into a system. The cabinets are constructed of 18mm multi-ply hardwood, coated with scratch free and durable black textured EPDM coating, and equipped with handles.

SX408AThe SX408A is an active powerful tandem ported 150W subwoofer with a special constructed 8" driver that is capable of producing an incredibly powerful and clear bass sound. It’s frequency response is as low as 37 Hz at -10 dB, and the frequency characteristic is very flat from 37 Hz to 120 Hz. This way, the sound coming from this piece of equipment is absolutely magnificent.

It contains an integrated class H amplifier, which ensures a high level of efficiency with very low distortion. This amplifier delivers an output power of 100 Watt to the subwoofer. It also contains an active crossover network with a frequency of 120 Hz, and two channels for powering satellite loudspeakers.

The two amplified satellite outputs deliver a maximum power of 2 x 100 Watt at 8 Ω or 2 x 160 Watt at 4 Ω.

For protection reasons, a built-in limiter limits the input signal when necessary. This limiter consists of three separate stages, one for every channel. This ensures the best sound quality with the least distortion for optimal performance. Power, Signal and Clip LED’s monitor the proper working of the integrated amplifier.

Besides the high efficiency of the class H amplifier, the SX408A also contains an automatic power on/off circuit to ensure the highest energy-efficiency. The volume of the Sub and satellite channels is individually controllable at the back of the subwoofer with two potentiometers, and the general volume can be controlled by an external volume control or wall panel, by connecting it to the built-in RJ45 connector.

This all makes the SX408A a simple but complete solution for a wide variation of fixed audio installations. The balanced input and loudspeaker output connections are made with euroblock terminal connectors, providing the possibility to connect two loudspeakers on every output.

RMS PowerSub Channel

RMS Power Satellite @ 8 Ω

RMS Power Satellite @ 4 Ω

Max SPL Frequency Response±3 dB

Frequency Range-10 dB

Dimensions(W x H x D)

Weight

SX408A 100 Watt 2 x 100 Watt 2 x 160 Watt 115 dBSub 20Hz - 120Hz

Top 110 - 20Khz 37Hz - 250Hz 250x420x715 mm 25 Kg

Technical Highlights

64

Internal schematic

Rear panel overview

VC3208Remote volume controller

The VC3208 is a flush mount wall controller for volume regulation of voltage controlled (0 ~ 10 Volts) amplifiers such as SX408A and AMP20. The volume is fluently controllable using the rotatable dial

with potentiometer.

The connection between the amplifier and the regulator is made using twisted pair CAT5e (or better) cabling fitted with an pluggable terminal block connector.

It is compatible with standard 45 x 45 mm installation materials such as AUDAC, Niko, Legrand, .... .

Available in black (B) and white (W)..

ActiveCrossoverNetwork

BalancedSignalInput

AutoPowerSwitch

MasterVolumeControl

Limiter

Limiter

Limiter

VC3208

2 x 100 Watt@ 8 Ω

2 x 160 Watt@ 4 Ω

8" Woofer100 Watt

Left

Right

Subwoofer

ClassH

ClassH

ClassH

The Power, Signal & Clip indicator LED’s monitor the proper working of the integrated amplifier.

The optional VC4008 wall volume controller has to be connected to the remote RJ45 connection. This makes it possible to control the general volume level.

The volume of the subwoofer channel can be controlled using the ‘Volume Subwoofer’ control knob.

The volume of the satellite channels can be controlled using the ‘Volume Satellite’ control knob.

The balanced input connections are made by means of 3-pin euro terminal blocks.

The amplified satellite output connections are made by means of 4-pin euro terminal blocks. This allows you to connect two satellite speakers on every output channel.

Due to the high efficiency of the integrated class H amplifier, the SX408A is completely passively cooled by means of the large ribbed aluminium heatsink on the back.

65

SX408The SX408 is a 150 Watt subwoofer with a special constructed 8" driver that is capable of producing an incredibly powerful and clear bass sound. Its frequency response is as low as 37 Hz at -10 dB, and the frequency characteristic is very flat from 37 Hz to 250 Hz. The very narrow design makes it suitable for unobtrusive installation on the ground, and makes it very easy to hide away.

Available in black (/B) and white (/W).

MBK100Bass cabinet mounting setThe MBK100 is a mounting bracket that can be used to mount different kinds of bass cabinets with a limited size and weight. The simple, nevertheless very efficient principle enables an easy and quick installation.

It is based on two wall brackets with V-shaped notch which have to be installed against the wall on the desired location. Two cylindrical plastic bushings have to be fixed to the provided points on the bass cabinet, using the included screws. Subsequently, the cylindrical plastic bushings have to be hooked into the V-shaped notch of the wall brackets.

This principle provides a great flexibility for installing different kinds of bass cabinets or other devices, while the distance to the wall is limited to only 15 mm.

66

Max Power RMS Power Impedance Max SPL Sensitivity1W / 1m

Frequency Response±3 dB

Frequency Range-10 dB

Dimensions(W x H x D)

Weight

SX408 300 Watt 150 Watt 8 Ω 117 dB 95 dB 45Hz - 250Hz 37Hz - 250Hz 250x420x715 mm 19 Kg

Technical Highlights

SX12The SX12 is a compact light-weight subwoofer cabinet with a power of 200 Watt RMS. It consists of one dual coil 12" woofer with a power of 100 Watt RMS, and two separate passive crossover networks with a frequency of 150 Hz. The input connection is made with a 4 pole speakon connector, containing both left and right audio channels.

Every channel is fitted with a passive crossover network whereof the LF output is connected to one of the 12" LF drivers. The connection for the Mid-High frequency drivers is made at the back of the cabinet with two speaker connectors.

This makes it possible to drive a small PA set, consisting of one subwoofer and 2 Mid-High drivers with only one amplifier. Hereby the SX12 is the ideal solution for upgrading your PX108 or PX110 set to a fully fledged small PA system at a reasonable price. The built-in head base makes it possible to combine with any top cabinet of your choice.

SX412The SX412 is a powerful single 12" subwoofer with a power of 300 Watt RMS. The sensitivity is rated at 96 dB, and it is capable of a maximum sound pressure level of 121 dB. The frequency response is flat between 45 – 250 Hz, and there’s a slight boost at 50 Hz. The connections are made with speaker connectors, and there’s the possibility to link several SX412’s to each other.

67

Max Power RMS Power Impedance Max SPL Sensitivity1W / 1m

Frequency Response±3 dB

Frequency Range-10 dB

Dimensions(W x H x D)

Weight

SX12 2 x 200 Watt 2 x 100 Watt 2 x 8 Ω 118 dB 95 dB 45Hz - 250Hz 42Hz - 250Hz 420x600x540 mm 32 Kg

Technical HighlightsTechnical Highlights

4 PoleSpeakon

Input

2 PoleSpeakonOutput

LEFT

RIGHT

2 PoleSpeakonOutput

12” Woofer2 x 100 Watt

Passive

Crossover

Network

Passive

Crossover

Network

Max Power RMS Power Impedance Max SPL Sensitivity1W / 1m

Frequency Response±3 dB

Frequency Range-10 dB

Dimensions(W x H x D)

Weight

SX412 600 Watt 300 Watt 8 Ω 121 dB 96 dB 45Hz - 250Hz 40Hz - 250Hz 380x700x600 mm 32 Kg

Technical Highlights

SX418The SX418 is a powerful single 18" subwoofer with a power of 700 Watt RMS. The sensitivity is rated at 100 dB, and it is capable of a stunning maximum sound pressure level of 129 dB, still with an extremely flat frequency response between 35 – 250 Hz. The connections are made with speaker connectors, and there’s the possibility to link several SX418’s.

The impressive combination of punch, very low frequency reproduction and accuracy is achieved by the 18” high-excursion driver with his very powerful four-piece magnet.

Because of the high pressures which occur inside the subwoofer cabinet, a complete reinforcement frame is mounted inside the cabinet.

SX415The SX415 is a powerful single 15" subwoofer with a power of 500 Watt RMS. The sensitivity is rated at 99 dB, and it is capable of a maximum sound pressure level of 126 dB. The frequency response is flat between 45 – 250 Hz, and there’s a slight boost at 100 Hz. The connections are made with speaker connectors, and there’s the possibility to link several SX415’s to each other.

68

Max Power RMS Power Impedance Max SPL Sensitivity1W / 1m

Frequency Response±3 dB

Frequency Range-10 dB

Dimensions(W x H x D)

Weight

SX418 1400 Watt 700 Watt 8 Ω 129 dB 100 dB 35Hz - 250Hz 25Hz - 250Hz 540x750x730 mm 54 Kg

Technical Highlights

Max Power RMS Power Impedance Max SPL Sensitivity1W / 1m

Frequency Response±3 dB

Frequency Range-10 dB

Dimensions(W x H x D)

Weight

SX415 1000 Watt 500 Watt 8 Ω 126 dB 99 dB 45Hz - 250Hz 35Hz - 250Hz 430x800x650 mm 43 Kg

Technical Highlights

After seeing the audio system successfully implemented at Rock Werchter 2012, the organisation of Pukkelpop 2012 enthusiastically approved AUDAC equipment for their emergency broadcasting installation. With the memories of the unprecedented storm at the 2011 edition still fresh, the Pukkelpop organizers maximised their efforts to keep the festivalgrounds safe under any circumstances imaginable. At the heart of this new safety net is the AUDAC-powered emergency evacuation system.

The system needed to be able to carry sound over great lengths and offer a high sound pressure level. But more importantly, the STI value needed to be near-perfect. For each of the three days the festival spans, its 66.000 visitors were covered by 26 AUDAC HS212T powerful 12 inch mid driver horns powered by Q4 amplifiers paired with Q4TR transformers to accommodate for the great distances.

So while everyone was rocking out to the tones of the Foo Fighters or Björk, AUDAC horn speakers kept the crowd safe and the organisation at ease.

69

100VOLT

8OHM

HS208/HS208T MK2

The HS208MK2/HS208TMK2 are two-way horn loaded loudspeakers which are specifically engineered to provide a long-throw, full range sound projection in a wide variety of in- and outdoor applications.

They come in two different versions for use in low impedance (HS208MK2) and 100 Volt public address (HS208TMK2) installations.

The sound is originated by an 8” high output woofer and compression driver with 1.3” voice coil. The compression driver is provided with an overload protection and is fitted with a 40° x 40° coverage horn which is coaxially constructed as one entirety with the loudspeakers enclosure.

Thanks to the selection of complementary high-quality components which are carefully matched, the HS208MKII delivers a wide range, smooth frequency response with a high efficiency. This ensures an extraordinary clarity of speech and extended frequency response for music with an RMS power of 150 Watt, up to a maximum power of 300 Watt. The frequency range (-10 dB) starts from 70 Hz up to 20 kHz and the sensitivity (1W / 1m) reaches 99 dB, while a maximum continuous sound pressure level from 122 dB can be achieved.

The enclosure is constructed out of multi-layer glass composite material with a durable scratch resistant EPDM coating. The aluminum front grill is lined with an acoustical transparent and water eliminating backing.

Connections are depending on the version made using heavy duty SpeakON connectors (HS208MK2) or a waterproof connection box with multi-tapping barrier terminal block (HS208TMK2).

An optional mounting bracket provides a complete solution for installation of the system(MBK208Z) while optional transportation flightcases provide protection for mobile use (FCHS208)

HS SeriesHorn speakersThe HS series are horn speakers especially designed for situations where sound has to be projected over long distances without losing audibility and clarity. Thanks to the smooth frequency response and high efficiency of the speakers, they can be used for high fidelity music reproduction along with superb projection of clear intelligible speech. The construction of the speakers is done with durable weather resistant materials, to ensure long time service in all weather conditions.

• Multi-layer glass composite enclosure

• Aluminum front grill with acoustical lining

• Ingress protection:IP54 for HS208MK2IP65 for HS208TMK2

• Connections:Heavy duty SpeakON for HS208MK2Multi-tapping barrier terminal for HS208TMK2

70

Max Power RMS Power Max SPL Sensitivity1W / 1m

Power Taps - Impedance Frequency Response±3 dB

Frequency Range-10 dB

Dimensions(W x H x D)

Weight

HS208 300 W 150 W 122 dB 99 dB 8 Ω 100Hz - 18kHz 70Hz - 20kHz 360x455x360 mm 12.5 Kg

HS208T 300 W 150 W 122 dB 99 dB 120 / 60 / 30 Watt - 8 Ω 100Hz - 18kHz 70Hz - 20kHz 360x455x360 mm 17.6 Kg

Technical Highlights

100VOLT

8OHM

HS212/HS212T MK2

The HS212MK2/HS212TMK2 are two-way horn loaded loudspeakers which are specifically engineered to provide a long-throw, full range sound projection in a wide variety of in- and outdoor applications.

They come in two different versions for use in low impedance (HS212MK2) and 100 Volt public address (HS212TMK2) installations.

The sound is originated by an 12” high output woofer and neodymium compression driver with 1.8” voice coil. The compression driver is provided with an overload protection and is fitted with a 40° x 40° coverage horn which is coaxially constructed as one entirety with the loudspeakers enclosure.

Thanks to the selection of complementary high-quality components which are carefully matched, the HS212MKII delivers a wide range, smooth frequency response with a high efficiency. This ensures an extraordinary clarity of speech and extended frequency response for music with an RMS power of 350 Watt, up to a maximum power of 700 Watt. The frequency range (-10 dB) starts from 65 Hz up to 20 kHz and the sensitivity (1W / 1m) reaches 103 dB, while a maximum continuous sound pressure level from 129 dB can be achieved.

The enclosure is constructed out of multi-layer glass composite material with a durable scratch resistant EPDM coating. The aluminum front grill is lined with an acoustical transparent and water eliminating backing.

Connections are depending on the version made using heavy duty SpeakON connectors (HS212MK2) or a waterproof connection box with multi-tapping barrier terminal block (HS212TMK2).

An optional mounting bracket provides a complete solution for installation of the system(MBK212Z) while optional transportation flightcases provide protection for mobile use (FCHS212)

• Multi-layer glass composite enclosure

• Aluminum front grill with acoustical lining

• Ingress protection:IP54 for HS212MK2IP65 for HS212TMK2

• Connections:Heavy duty SpeakON for HS212MK2Multi-tapping barrier terminal for HS212TMK2

7171

MBK208Z /MBK212ZThe MBK208Z/212Z mounting brackets are especially designed for mounting the HS208MK2, HS208TMK2 ,HS212MK2 or HS212TMK2 2-Way Horn speakers. Using these mounting brackets, these horn speakers can be mounted on any ceiling, pole or other position, while aiming the loudspeakers into the desired direction.

They are constructed of steel with a thickness of 3 mm containing a zinc-plated finish preventing oxidation, while the U-shaped profile of the base increases the stability of the speakers. The bracket comes with the necessary parts, such as bolts, nuts, washers and speaker attachments ensuring safe and secure mounting.

Max Power RMS Power Max SPL Sensitivity1W / 1m

Power Taps - Impedance Frequency Response±3 dB

Frequency Range-10 dB

Dimensions(W x H x D)

Weight

HS212 700 W 350 W 129 dB 103 dB 8 Ω 80Hz - 18kHz 65Hz - 20kHz 505x505x735 mm 29 Kg

HS212T 700 W 350 W 129 dB 103 dB 240 / 120 / 60 Watt - 8 Ω 80Hz - 18kHz 65Hz - 20kHz 505x505x735 mm 39 Kg

Technical Highlights

100VOLT

8OHM

HS121The HS121 is a full range sound projector based on a 4" driver, especially designed to provide quality sound with a long throw range in a wide variation of in- and outdoor applications.

Its wide, smooth frequency response and high efficiency ensure high-fidelity music reproduction along with superb projection of clear and intelligible speech with very low distortion.

It delivers a power of 20W RMS in standard 8 Ω systems with a maximum power of 40 W, but it can also be used in 100V PA systems. The 100V line transformer has power tappings for 20W, 10W and 5W which can be selected by the special designed waterproof 5 pin connector. This connector allows the user to select the desired power tapping depending on the angle of rotation of the connector.

The housing is made of the strongest ABS material and the IP rating of 65 makes the HS121 suitable for outdoor use.

For safety reasons, the speaker is equipped with an internal steel safety cable,. This prevents the speaker from falling, even in situations where the housing of the speaker has been damaged or broken.

72

Max Power RMS Power Max SPL Sensitivity1W / 1m

Power Taps - Impedance Frequency Response±3 dB

Frequency Range-10 dB

Dimensions(W x H x D)

Weight

HS121 40 W 20 W 114 dB 98 dB 20 / 10 / 5 Watt - 8 Ω 180Hz - 13kHz 150Hz - 15kHz 220x160x230 mm 1.9 Kg

Technical Highlights

CHA SeriesCompression horn loudspeakers

The CHA series are compression horn loudspeakers especially designed for paging and background music applications, offering durability and optimal speech and music reproduction. They are fitted with a line transformer with adjustable power tappings, to be used in 70V/100V public address applications.

The speakers are made from tough ABS, finished in a light grey color with sturdy adjustable mounting bracket. The Ingress Protection rating of IP56 makes them suitable for outdoor use.

CHA215The CHA215 is a powerful compression horn loudspeaker with an RMS power of 15 Watt. It is fitted with a line transformer with adjustable power tappings, and can be used in 70V or 100V PA installations at 15W, 7.5W, 3.75W or 1.9W.

CHA230The CHA230 is a long throw compression horn loudspeaker with an RMS power of 30 Watt. It is fitted with a line transformer with adjustable power tappings, and can be used in 70V or 100V PA installations at 30W, 20W, 10W or 5W.

100VOLT

100VOLT

73

Max Power RMS Power Sensitivity1W / 1m

Power Taps Frequency Response±3 dB

Dimensions(ø x D)

Weight

CHA215 25 W 15 W 107 15 / 7.5 / 3.75 / 1.9 Watt 400Hz - 9kHz 271.5x208.5 mm 1.95 Kg

CHA230 45 W 30 W 109 30 / 20 / 10 / 5 Watt 400Hz - 7.5kHz 238x302 mm 2.13 Kg

Technical Highlights

100VOLT

SP SeriesSound projectors

The SP series are high efficiency sound projectors designed to provide good speech intelligibility and background music in a wide variety of applications. They are weather-proof treated to be used indoor as well as outdoor and are perfectly suited to be used in large 100V broadcast systems such as train stations or airports.They all meet the IP56 Ingress Protection standard.

SP20HAThe SP20HA is a 20 Watt sound projector especially designed for hanging purposes. The mounting of the speaker can be done with the standard attached 1.5m connection cable.

The SP20 are humidity proof 20 watt sound projectors, ensuring a good and powerful sound reproduction. Due to this, it is suitable for speech and music.

They are fitted with a 4" broadband loudspeaker and the power is adjusted by the integrated 100V line transformer. The power can be adjusted by 4 different power taps for 20W, 10W, 5W and 2.5W.

The enclosure is made of white weatherproof ABS with a white weatherproof coated aluminium front grill.

It is available in two different versions, with a stainless steel mounting bracket for easy wall or ceiling mount, or with a standard attached connection cable with steel core for hanging purposes.

SP20The SP20 is a 20 Watt sound projector with a metal mounting bracket for easy mounting on any wall or ceiling.

100VOLT

74

Max Power RMS Power Max SPL Sensitivity1W / 1m

Power Taps Frequency Response±3 dB

Dimensions(ø x D)

Weight

SP20 40 W 20 W 105 dB 92 dB 20 / 10 / 5 / 2.5 Watt 110Hz - 18kHz 138x204 mm 1.9 Kg

SP20HA 40 W 20 W 105 dB 92 dB 20 / 10 / 5 / 2.5 Watt 110Hz - 18kHz 138x204 mm 1.9 Kg

Technical Highlights

100VOLT

100VOLT

SP22The SP22 is a professional humidity and weatherproof unidirectional sound projector with a high efficiency level. It features a 5" full range driver and a built-in 100V line transformer with power tappings for 20W, 10W or 5W, which can be selected by connecting the corresponding pair of the 4 core connection cable.

The enclosure, grill and bracket are made of weatherproof coated aluminium.

SP202The SP202 is a professional humidity and weatherproof bidirectional sound projector with a high efficiency level. It features 2 x 5" full range drivers and a built-in 100V line transformer with power tappings for 2 x 10W, 2 x 5W or 2 x 2.5W, which can be selected by connecting the corresponding pair of the 4 core connection cable.

The enclosure, grill and bracket are made of weatherproof coated aluminium.

75

Max Power RMS Power Sensitivity1W / 1m

Power Taps Frequency Response±3 dB

Dimensions(ø x D)

Weight

SP22 40 W 20 W 92 20 / 10 / 5 / 2.5 Watt 110Hz - 18kHz 138x205 mm 2.2 Kg

SP202 2 x 20 W 2 x 10 W 91 20 / 10 / 5 / 2.5 Watt 110Hz - 18kHz 138x205 mm 2.7 Kg

Technical Highlights

100VOLT

Heimolen, Sint Niklaas Belgium runs on AUDAC

ASP20The ASP20 is a 20 Watt spherical loudspeaker, fitted with a 8" driver and a 100V line transformer with different power tappings for 20W, 10W, 5W and 2.5W.

Its wide smooth frequency response and high efficiency ensure high fidelity music and speech reproduction with a 360° horizontal coverage. This makes it perfect for big, open areas like factory halls or athletic fields.

The ABS housing is moisture and UV resistant. The internal steel cable core and included fixing hook ensure a safe and secure mounting of the loudspeaker.

76

Max Power RMS Power Max SPL Sensitivity1W / 1m

Power Taps Frequency Response±3 dB

Dimensions(ø)

Weight

ASP20 30 W 20 W 104 dB 92 dB 20 / 10 / 5 / 2.5 Watt 80Hz - 18kHz ø 254 mm 2.95 Kg

Technical Highlights

Direct sound Direct sound

reflected sound(reverberation)

reflected sound(reverberation)

Column speakersThe problem

A common problem that the AUDAC audio system designers often had to cope with were sound systems that allow the amplification of intelligible speech and music in large reverberant spaces.

Besides intelligible speech and true-to-nature music reproduction, there are often several other requirements for such a system:

• Slim and unobtrusive design

• Being safe and reliable

• Cover long distances

• Easy to install, configure and maintain

• Free from distortion

• High sound directivity

AUDAC is already developing column speakers for specific purposes for over a decade, and with their experience and knowledge they developed a range of column speakers that are suitable to form a solution for every situation.

While many other major manufacturers are involved in the development of DSP-driven applications for such situations, AUDAC succeeded to develop solutions with passive column speakers that give excellent results and have proven their dignity in many applications.

The solutionWhen a sound system has to be designed for a highly reverberant space (such as: airport terminals, railway stations, cathedrals, auditoriums, …) we must take the direct to reverberant sound ratio into account.

We should try to maximize the sound that is projected directly from the loudspeaker to the listeners ear, while the sound that reaches the listeners ear trough reflections on walls, ceilings and other acoustically reflective surfaces has to be reduced as much as possible.

The solution for this problem is focusing the sound directly to the listener’s ears and away from acoustically reflective surfaces.

The focusing of the sound can be done with column speakers. These give the listener the effect of listening to only one single line source, with the same dimensions as the total unit, and the performance of the individual components combined with each other.

77

Library, Genk Belgium runs on AUDAC

100VOLT

12OHM

KYDODesign column speakerThe KYDO is a design column speaker with an extraordinary sound and surprising high power, for use in all applications where audibility of music and speech is highly appreciated.

It features a speaker section with 6 x 2" drivers, capable of producing a power up to 60 Watt and is equipped with a 100V line transformer with 4 different power taps which are selectable with a recessed adjuster screw behind the front cover.

The power taps that can be selected are 20W, 10W, 5W and 2.5W, and there’s also an internal switch provided for 12 Ohm impedance.

The housing is made of aluminum, making it a stylish, light-weight column speaker. The especially designed wall bracket makes it possible to focus the speaker in any direction, to obtain the best possible audibility.

Available in black (/B) and white (/W).

Transportation flightcase optional available (FCKYDO).

78

Max Power RMS Power Max SPL Sensitivity1W / 1m

Power Taps / Impedance Frequency Response±3 dB

Frequency Range-10 dB

Dimensions(W x H x D)

Weight

120 W 60 W 104 dB 86 dB 20 / 10 / 5 / 2.5 Watt - 12 Ω 100Hz - 17kHz 80Hz - 19kHz 70x545x105 mm 2.5 Kg

Technical Highlights

100VOLT

6OHM

AXIRDesign column speakerThe AXIR is a design column speaker with an extraordinary sound and surprising high power, for use in all applications where audibility of music and speech is highly appreciated.

It features two individual speaker sections with each 6 x 2" drivers, capable of producing a power up to 120 Watt. It is equipped with a 100V line transformer with 4 different power taps for each speaker section, selectable with a recessed adjuster screw behind the front cover.

The power taps that can be selected are 20W, 10W, 5W and 2.5W, and there’s also an internal switch provided for 6 Ohm impedance.

This allows the user to set the speakers power between 40W and 5W in 100V applications, and to change the speakers polar pattern. By adjusting the upper and lower power taps individual, the sound transfer length can be adapted to each specific situation.

The housing is made of aluminum, making it a stylish, light-weight column speaker, and the especially designed wall bracket makes it possible to focus the speaker in any direction, to obtain the best possible audibility.

Available in black (/B) and white (/W).

Transportation flightcase optional available (FCAXIR).

AXIR/OOutdoor design column speakerFinally it is possible to enjoy the elegance of an AXIR speaker in the open air. Its extraordinary sound and high power are no longer confined to indoor use.

It offers an identical performance to the regular Axir model, but a few changes make it well-suited for outdoor circumstances. Such as the power taps which can be selected using the specially designed waterproof AWX-5 connector.

Secondly, a separate cloth front on each driver keeps the elements of nature at a safe distance, while a special coating protects against penetrating humidity. Further added reliability is achieved by using an aluminum front grill and an electroplated stainless steel mounting bracket. Together these improvements result in a weather-proof IP55 column speaker of exceptional quality and design!

Available in black (AXIR/OB) and white (AXIR/OW).

79

Max Power RMS Power Max SPL Sensitivity1W / 1m

Power Taps / Impedance Frequency Response±3 dB

Frequency Range-10 dB

Dimensions(W x H x D)

Weight

AXIR 240 W 120 W 106 dB 86 dB 2 x 20 / 10 / 5 / 2.5 Watt - 6 Ω 100Hz - 17kHz 80Hz - 19kHz 70x1005x105 mm 4.25 Kg

AXIR/OW - /OB 240 W 120 W 106 dB 86 dB 40 / 20 / 10 Watt - 6 Ω 100Hz - 17kHz 80Hz - 19kHz 70x1005x105 mm 4.25 Kg

Technical Highlights

4OHM

GIAXDesign column speakerThe GIAX is a design column speaker with an extraordinary sound and surprisingly high power, for use in all applications where audibility of music and speech is highly appreciated.

It features a line array with 24 special designed 2" drivers, which are located on precisely calculated locations to accomplish a wide sound dispersion.

It gives the impression of listening to just a single sound source, but with a more distributed sound coverage. The total speaker array is capable of producing a power of 240 Watt RMS, with a maximum power of 480 Watt.

The speaker section has a total impedance of 4 Ohm. The housing is made of aluminium, making it a stylish, light-weight column speaker.

A special designed mounting bracket is included, making it possible to focus the speaker into any direction. The two included incline brackets allow an incline angle between 0° and 15°, to obtain the best possible audibility.

Available in black (/B) and white (/W).

80

Max Power RMS Power Max SPL Sensitivity1W / 1m

Impedance Frequency Response±3 dB

Frequency Range-10 dB

Dimensions(W x H x D)

Weight

480 W 240 W 122 dB 98 dB 4 Ω 100Hz - 17kHz 80Hz - 19kHz 70x2005x105 mm 6.5 Kg

Technical Highlights

How column speakers workA column speaker is a speaker with several drivers stacked above each other and feeds all speakers with the same source signal. Therefore they produce the same sound at the same time. The advantage of this technology achieved to other speakers is a remarkably tightly defined vertical dispersion. The technique used to obtain this result is called ‘Phased Array’.

It’s a known fact that the directivity of a loudspeaker varies with the frequency: at low frequencies the loudspeakers radiate in an omnidirectional manner and when the frequency increases the radiation becomes more and more directional. Eventually producing a narrow beam of sound directly on axis.

When a second identical signal source is placed alongside the first, producing an identical signal with identical timing (phase), the two identical waveforms will interact with each other where their paths meet. They will ‘interfere’ with each other. On the central axis between the two sources, the distance from each source is identical, so the waveforms from each speaker will arrive at exactly the same time, and in exactly the same phase. There will be a constructive interference between the loudspeakers, doubling the amplitude along that axis compared to what it would have been for a single source.

At the off-axis points, the relative distances between the two drivers is changed, and their waveforms will meet at slightly different times with slight phase shifts. This results in a partial (or even complete) cancellation of the sound. This is called destructive interference. When more identical signal sources are added at exactly the same distance, the interference patterns will be stronger clustered, with a more focused beam and a larger amplitude on the central axis.

This effect is reflected in the image below where the carriage length of column speakers is shown. When the length (and the number of drivers) of a column speaker doubles, the sound beam will be more focused and the carriage length will be doubled.

It is recommended to keep the listening area within the speakers carriage range, to maintain the best speech intelligibility and sound quality.

KYDO

8 m

AXIR

16 m

GIAX

32 m

Directivity of a single loudspeaker (CS2.1) Directivity of a column loudspeaker (AXIR)

81

100VOLT

100VOLT

CLS420Column speakerThe CLS420 is a standard slim but powerful column speaker, suitable for music and speech.

It features a speaker unit consisting of 4 x 3" drivers, capable of producing a power up to 20 Watt RMS and fitted with a 100V line transformer with power taps for 20W and 10W.

The speaker housing is made of white coated sturdy aluminium and the special designed wall bracket for mounting is included.

CLS440Column speakerThe CLS440 is a standard slim but powerful column speaker, suited for music and speech.

It features a speaker unit consisting of 8 x 3" drivers, capable of producing a power up to 40 Watt RMS and fitted with a 100V line transformer with power taps for 40W and 20W.

The speaker housing is made of white coated sturdy aluminium and the special designed wall bracket for mounting is included.

82

Max Power RMS Power Sensitivity1W / 1m

Power Taps Frequency Response±3 dB

Dimensions(W x H x D)

Weight

CLS420 30 W 20 W 91 dB 20 / 10 Watt 170Hz - 15kHz 478x104x86 mm 2.1 Kg

CLS440 60 W 40 W 92 dB 40 / 20 Watt 170Hz - 15kHz 834x104x86 mm 3.5 Kg

Technical Highlights

Service center, Mol Belgium runs on AUDAC

83

Ateo Series2-Way speaker with Clevermount™

ATEO 4The ATEO 4 is the 4” version, with a 1” dome tweeter and a 4” Mid / Low frequency driver, ensuring a true to- nature, high-fidelity reproduction of music and speech. It features a stunningly designed and elegant looking ABS housing which is fitted with High-Quality components.

ATEO 4 speakers are available in black (/B) or white (/W).

The ATEO is a series of extraordinary loudspeakers especially designed for fixed install indoor applications, ranging from modern residential applications to the most demanding designer applications in environments such as retail stores, pubs, restaurants or even clubs thanks to its high power components and extremely wide spread angle.

100VOLT

8OHM

84

Max Power RMS Power Max SPL Sensitivity1W / 1m

Power Taps - Impedance Frequency Response±3 dB

Dimensions(W x H x D)

Weight

Ateo 4 70 Watt 35 Watt 101 dB 86 dB 24/ 12 / 6 / 3 Watt - 8 Ω 100Hz - 20kHz 137x244x154 mm 2,05 Kg

Ateo 6 120 Watt 60 Watt 106 dB 89 dB 50 / 25 / 12,5 Watt - 8 Ω 65Hz - 20kHz 194x350x220 mm 3,82 Kg

Technical Highlights

ATEO 6

Clevermount: less work, more sound

The ATEO 6 is the 6” version, with a 1” dome tweeter and a 6” Mid / Low frequency driver, ensuring a true to- nature, high-fidelity reproduction of music and speech. It features a stunningly designed and elegant looking ABS housing which is fitted with High-Quality components.

ATEO 6 speakers are available in (/B) or white (/W).

What makes this loudspeaker range so exceptional is the unique new Clevermount™ bracket technology. The bracket provides a great ease for installing the loudspeaker.

Connecting the bracket is done simply by attaching the included metal wall-plate to the desired location. When mounted, the wires must be connected to the desired connection block terminal. Power taps for 100 Volt or 8 Ohm can be selected by picking the right terminal. After this is done, just slide the loudspeaker onto the wallplate, tighten the safety screw and you’re ready to rock!

This way, it’s really child’s play to install a large number of loudspeakers in no-time. Even if you’re working all alone while a croud is watching your fingers or when installing the speakers up high while standing on a ladder.

Clevermount BracketTMChoose Incline31

Mount & Connect Base2Attach Speaker

100VOLT

8OHM

85

Max Power RMS Power Max SPL Sensitivity1W / 1m

Power Taps - Impedance Frequency Response±3 dB

Frequency Range-10 dB

Dimensions(W x H x D)

Weight

WX302 60 Watt 30 Watt 100 dB 85 dB 20 / 10 / 5 Watt - 8 Ω 90Hz - 18kHz 60Hz - 20kHz 199x129x120 mm 1.66 Kg

WX502 100 Watt 50 Watt 102 dB 87 dB 40 / 20 / 10 Watt - 8 Ω 70Hz - 18kHz 55Hz - 20kHz 212x147x136 mm 2.54 Kg

Technical Highlights

WX SeriesWall speakersThe WX series are powerful 2-way performance speakers suited for a wide variety of applications, ensuring true-to-nature, high fidelity reproduction of music and speech. The elegant shaped synthetic enclosure is available in three different colours (black, white and Silver), making it blend into any environment, going from standard indoor home to special indoor design interiors. The included mounting bracket allows horizontal and vertical mounting as well as focussing of the speaker, and the 100V line transformer contains three steps of impedance for 100V applications or 8 Ω for standard low impedance applications. They are fitted with a protection network against tweeter overload.

WX302The WX302 is the smallest speaker of the WX family, fitted with an 1" dome tweeter and a 3" low frequency loudspeaker. It delivers a power of 30W in standard 8 Ohm systems, but can also be used in 100V PA systems. The 100V line transformer has tappings for 20W, 10W and 5W. This speaker is available in three colours: white, black and Silver.

Horizontal Coverage: 100°Vertical Coverage: 100°

WX502The WX502 is the medium speaker of the WX family, fitted with an 1" dome tweeter and a 5 1/4" low frequency loudspeaker. It delivers a power of 50W in standard 8 Ohm systems, but can also be used in 100V PA systems. The 100V line transformer has tappings for 40W, 20W and 10W. This speaker is available in three colours: white, black and Silver.

Horizontal Coverage: 110°Vertical Coverage: 110°

100VOLT

8OHM

100VOLT

8OHM

86

Max Power RMS Power Max SPL Sensitivity1W / 1m

Power Taps / Impedance Frequency Response±3 dB

Frequency Range-10 dB

Dimensions(W x H x D)

Weight

WX802 140 Watt 70 Watt 108 dB 89 dB 60 / 30 / 15 Watt - 16 Ω 60Hz - 17kHz 50Hz - 20kHz 270x360x215 mm 7.5 Kg

Technical Highlights

WX802The WX802 is the largest speaker of the WX family, fitted with an 1" dome tweeter and a 8" low frequency loudspeaker. It delivers a power of 70W in standard 16 Ohm systems, but can also be used in 100V PA systems. The 100V line transformer has tappings for 60W, 30W and 15W. This speaker is available in three colours: white, black and Silver.

Horizontal Coverage: 100°Vertical Coverage: 100°

100VOLT

16OHM

Dudelange main street, Luxemburg runs on AUDAC

87

De Oude Vismijn, Ghent Belgium runs on AUDAC

88

Outdoor wall speakersThe WX series also offers models designed for outdoor applications. Due to a special treatment these drivers can provide a durable and weatherproof solution where a true-to-nature and high-fidelity reproduction of music and speech is desirable.

But its additional features really make the difference. A drain hole makes sure the moisture can flow out freely when condensation occurs. The special designed waterproof connector lets you set the power for the speakers in three adjustable steps for 100V and one step for low impedance applications.

The enclosure is made of durable weatherproof ABS, while the electroplated coating of the included mounting bracket easily passes the 96 hours salt-spray test. This means that even in rough weather conditions it's possible to mount and focus the loudspeaker both horizontally and vertically.All these features result in a durable and good looking loudspeakers complying to the IP55 rating.

Max Power RMS Power Max SPL Sensitivity1W / 1m

Power Taps - Impedance Frequency Response±3 dB

Frequency Range-10 dB

Dimensions(W x H x D)

Weight

WX302/OB, /OW 60 W 30 W 100 dB 85 dB 20 / 10 / 5 Watt - 8 Ω 90Hz - 18kHz 60Hz - 20kHz 199x129x120 mm 1.66 Kg

WX502/OB, /OW 100 W 50 W 102 dB 87 dB 40 / 20 / 10 Watt - 8 Ω 70Hz - 18kHz 55Hz - 20kHz 212x147x136 mm 2.75 Kg

WX802/OB, /OW 140 W 70 W 108 dB 89 dB 60 / 30 / 15 Watt - 16 Ω 60Hz - 17kHz 50Hz - 20kHz 270x360x215 mm 7.5 Kg

Technical Highlights

WX502/OB or /OWThe WX502/OB is fitted with a 1" dome tweeter and a 5 1/4" low frequency loudspeaker, delivering a power of 50 Watt in standard 8 Ω systems. But it can also be used in 100 V systems with power tappings for 40 Watt, 20 Watt or 10 Watt.

It lends itself to a wide variation of outdoor applications, ensuring a true-to-nature, high fidelity reproduction for music and speech. Available in black (WX502/OB) and white (WX502/OW).

Horizontal Coverage: 110°Vertical Coverage: 110°

WX302/OB or /OWThe WX302/OB is a powerful 2-way speaker for outdoor use. Fitted with a 1" dome tweeter and a 3" low frequency loudspeaker, it delivers a power of 30 Watt in standard 8 Ω systems. But it can also be used in 100 V systems with power tappings for 20 Watt, 10 Watt or 5 Watt. Available in black (WX302/OB) and white (WX302/OW).Horizontal coverage: 100°Vertical Coverage: 100°

WX802/OB or /OWThe WX802/O is the largest speaker of the WX family. It is fitted with a 1" dome tweeter and an 8" low frequency loudspeaker, bringing 70 Watt in standard 16 Ω systems. But it also offers 100 V power tappings for 60 Watt, 30 Watt or 15 Watt.

It's the perfect companion for outdoor applications where clear background music is required throughout the day, and a more powerful sound with deeper bass is necessary when the party erupts after sunset. Available in black (WX802/OB) and white (WX802/OW).Horizontal coverage: 100°Vertical Coverage: 100°

8OHM

8OHM

100VOLT

100VOLT

100VOLT

16OHM

89

RMS Power Sensitivity1W / 1m

Frequency Response±3 dB

Power Supply Dimensions(W x H x D)

Weight(Set)

LX523 2 x 40 W 88 dB 80Hz - 20kHz 230V AC / 50-60 Hz 178x240x193 mm 5.6 Kg

Technical Highlights

LX523Active speaker system with remote input• 3-Way active speaker system

• 2 x 35 Watt RMS

• RJ45 remote input

• Bass and Treble equalization

• Included mounting brackets

The LX523 is a 3-way stereo loudspeaker system consisting of an active and passive loudspeaker, designed to be used in combination with separately available input units such as the WP523 Wall panel and RM523 Web based Input Control Unit. It is able to produce a clear and powerful sound with a power up to 2 x 35 Watt, offering a flexible solution for a wide variation of applications.

The input connections should be made on the rear side of the active loudspeaker by means of an RJ45 input connector, accompanied with a two band tone control for Bass and Treble equalization. The applied signal is differential with an increased voltage level, making the transfered signal insensitive for interference and noise generated by for external devices. This allows bridging distances up to 300 meters between the input device and the loudspeaker, by just using inexpensive twisted pair CAT5 cable.

The loudspeakers are available in both black (/B) and white (/W).

WP523Remote wall mixer

The WP523 is a Remote Wall Mixer meant to be used as the source device. It converts the signal coming from a stereo line-level audio source device (such as CD-player, Tuner,

MP3 player, ... ) or balanced microphone input to the level corresponding to the differential signal input on the rear side of the LX523 (RJ45). Making it possible to transfer high-

quality audio over long distances between the wall panel and loudspeaker, by just using inexpensive twisted pair CAT5 cabling.

On the front side of the wall panel is a stereo RCA line input provided together with a balanced XLR microphone input. Each of them with their own knob, allowing both signals to be mixed with each other. A main volume dial allows you to adjust the overall volume of the loudspeaker system. An internal limiter avoids distortion on the input signal and a jumper on the rear side allows you to provide 12V phantom power to the microphone input.

The connection of the CAT5 cable can be made on the rear side of the wall panel by means of an 8-pin phoenix connector.

CAT5

WP523

LX523

LX 523 Setup 1

AUDAC

LINE IN

MIC IN

90

RM523Web based input control unit• 4 Stereo line inputs

• 1 Balanced microphone input with phantom power

• TCP/IP and RS232 control

• Stereo line output

• RJ45 Audio output for LX523

• Priority on Mic channel

The RM523 is a web based input control unit, featuring four stereo line inputs and one balanced microphone input with phantom power, allowing the connection and control of several stereo audio source devices (such as CD-player, Tuner, MP3 player, ... ) and a microphone to one (potentially two) output device(s). Two outputs are provided, one stereo line output, and one differential output with increased voltage level performed with an RJ45 connector, which is especially meant for connecting the LX523 loudspeaker system.

The control of the device can be done in multiple ways: an integrated website makes it possible to control all the functions from any computer with a web browser without requiring additional software, while the RS232 connection lets the user control the RM523 with any device supporting serial communication, such as a computer or even a home or industrial automation system. The RM523 is controllable using the dedicated iPhone or iPad app, available on the App Store.

The various input signals can be patched to the output with a two-band tone control, while the microphone channel has the possibility to provide 15V phantom power for powering condenser microphones. Priority settings on the microphone channel make it possible to supress other sources when someone is speaking into the microphone.

To make the installation even more complete, an optional MWX43/45 wall panel can be installed to control the signal routing and volume level from one or multiple fixed locations.

LX523 sets available:• LM523: set consisting of one LX523 pair and 1 RM523• LW523: set consisting of one LX523 pair and 1 WP523

CAT5

MWX43/45MWX43/45WLIWLIWMIWMI

LX523LX523LX523

RM523RM523

4 Stereo Line Inputs + 1 Balanced Mic input4 Stereo Line Inputs + 1 Balanced Mic input

RS232 ControlRS232 Control

Stereo Line OutputStereo Line Output LX 523 Setup

WiFi

LaptopiPadiPhone

Available on the

WEB

Optional MBS200 Mounting bracket

91

LX503 MK2

Active speaker system• 3-Way active and passive speaker

• 2 x 40 Watt RMS

• Bass and Treble equalization

• Unbalanced RCA and Mini-Jack inputs

• Magnetically Shielded Speakers

• Adjustable brackets, Easy to mount

• Heatsink for cooling

• Line level amplification

The LX503 MKII is a 3-way stereo loudspeaker system consisting of an active and passive unit to be linked with each other. It offers a flexible solution for a wide variety of applications, producing a clear and powerful sound.

The integrated amplifier is capable of delivering a power of 2 x 40 Watt and has a line level input allowing the speaker system to be directly connected to audio sources such as CD-players, DVD players, Laptops, MP3 players or many other line level audio sources.

The line input is performed in three different ways. Unbalanced audio sources can be connected to either the RCA or 3.5mm jack connectors, while balanced audio sources can be connected to the Euro-Terminal block connectors.

The magnetically shielded loudspeakers ensure a complete immunity against interference and radiation caused by external devices, reducing the hum and noise to an absolute minimum.

Both speakers come with a sturdy steel mounting bracket, allowing proper mounting and inclining.

92

RMS Power Sensitivity1W / 1m

Frequency Response±3 dB

Power Supply Dimensions(W x H x D)

Weight(Set)

LX503MKII 2 x 40 W 88 dB 80Hz - 20kHz 230V AC / 50-60 Hz 178x240x193 mm 5.4 Kg

Technical Highlights

Campus Delghust Ronse, Belgium runs on AUDAC 93

8OHM

CELO 2The ultra-compact size enables the CELO2 smoothly integrate into any interior like no other loudspeaker. The outer diameter which only measures 118 mm is as compact as a standard down-lighter while the smooth grill with thin border guarantees an unobtrusive installation in any ceiling.

The sound is originated by a 2" driver which provides a full-range, warm and detailed sound, with an improved response in the low frequencies due to the ported enclosure with closed back can. This way, a smooth sound reproduction with clear and crisp sound is guaranteed.

An elegant look with minimal visual impact is created by the slim grill with very thin border, while great ease and installers convenience is guaranteed using the quick-fix mechanism with Gold-CON connectors. The grill is held in place using neodymium magnets, providing a quick and stable assembly.

The CELO series is AUDAC‘s first High-End ceiling speaker series, consisting of three models that can guarantee an optimal experience for every situation and application.

Due to its slim grill design with very thin border of only 1 mm and a limited grill depth which extrudes from the ceiling surface by only 3.2 mm, these speakers will become nearly invisible when mounted. This elegant and unobtrusive grill is held in place by means of powerful neodymium magnets and can be easily removed.

When observing the electronics, it’s clear for anyone to see that the CELO speakers are made by using only the highest quality materials, guaranteeing an unsurpassed sound experience, characterised by a warm and detailed sound.

To guarantee a lifetime stability, secure mounting and easy assembly, the loudspeaker connection is made using Gold-CON Technology connectors while the loudspeaker is fixed into the ceiling by means of a quick fixing mechanism which can be tightened by 4 screws.

3.2mm Grill thickness

1mm border width

Celo 5Celo 2 Celo 6 Celo 8

CELO SeriesHigh-end ceiling speakers

94

OHM

8OHM

8OHM

CELO 5No compromises made... The design using high-grade materials consists of an 5" aluminum cone woofer and complementary 1" dome tweeter which are smoothly matched and optimized using a high-quality crossover network. The coaxial construction is made with an acoustically optimized arm with phase plug, reducing diffraction and enhancing the off-axis high frequency response.

This results in a stunning sound giving an extreme detailled and clear sound while keeping an ideal match between quality and size.

CELO 8The most powerful model of the family, consisting of an 8" aluminum cone woofer and complementary 1" dome tweeter which are smoothly matched and optimized using a high-quality crossover network. The coaxial construction is made with an acoustically optimized arm with phase plug, reducing diffraction and enhancing the off-axis high frequency response.

This combination makes the CELO8 able to reach lower frequencies and a more powerful bass sound than any other ceiling speaker. The experience of High fidelity sound with detailing low frequencies is unheard in its class.

CELO 6Some things have it all... That was exactly the idea when the CELO6 was designed. With its size and characteristics in between the other models, the perfect match for a large number of possible applications is created. The 6" aluminum cone woofer and complementary 1" dome tweeter are smoothly matched and optimized using a high-quality crossover network. This guarantees a perfect harmony and balance of detailled high frequencies, warm and pure sound in the mid-range and punchy low frequencies.

95

Max Power RMS Power Max SPL Sensitivity1W / 1m

Drivers Frequency Response±3 dB

Dimensions(W x D)

CELO 2 20 W 10 W 93 dB 83 dB 2" 120 Hz - 20 kHz ø118 x 98 mm

CELO 5 100 W 50 W 102 dB 85 dB 1" HF & 5" LF 70 Hz - 20 kHz ø175 x 98 mm

CELO 6 120 W 60 W 106 dB 88 dB 1" HF & 6" LF 55 Hz - 20 kHz ø230 x 103 mm

CELO 8 160 W 80 W 108 dB 89 dB 1" HF & 8" LF 46 Hz - 40 kHz ø270 x 118 mm

Technical Highlights

8OHM

8OHM

Black front grill optionally availableCELO 2: AU230035202CELO 5: AU230035502

CELO 6: AU230035602CELO 8: AU230035802

Black front grill optionally availableCELO 2: AU230035202CELO 5: AU230035502

CELO 6: AU230035602CELO 8: AU230035802

MERO SeriesHigh-end in-wall speakers

96

The MERO speakers will blend beautifully into any interior, making only their extraordinary sound draw your attention with their nearly invisible design. This series includes three models of rectangular In-Wall speakers with different sizes and specifications, each of them offering solutions for their kind of highly demanding installation. Their unobtrusive design due to the slim grill with very thin border of only 1mm and limited grill depth extrudes the surface by only 3.2 mm when installed.

Their grilles are retained by neodymium magnets which enables assembly in seconds, while powerful enough to keep it fixed, even when subject to vibrations or if touched. Their applications range from residential Hi-Fi and home cinema installations to Multi-Zone systems, unobtrusive installations in lounges, bars, boutiques and offices.

When looking at them you will notice the quality of the materials they are made of. When listening to them, you will realize your eyes were right. The used materials are carefully selected and optimized to guarantee an unsurpassed sound experience, characterised by a warm and detailed sound.

To guarantee a lifetime stability, secure mounting and easy assembly, the loudspeaker connection is made using Gold-CON Technology connectors while the loudspeaker is mounted using a quick fix mechanism.

8OHM

8OHM

MERO 5The selection of high-grade materials in combination with accurate acoustics craftmanship makes the MERO speakers superior in their class. The medium sized MERO5 consists of a 5” aluminum cone woofer and complementary 1” dome tweeter that are smoothly matched and optimized using a high-quality crossover network.

An acoustically optimized waveguide matches the dispersion of woofer and tweeter, while a phase-plug reduces diffraction and enhances off-axis high frequency response. All these details share their part to its pure sound.

An elegant look with minimal visual impact is created by the slim grill with very thin border, while great ease and installers convenience is guaranteed using the quick-fix mechanism with Gold-CON connectivities. The grill is held in place using neodymium magnets, providing a quick and stable assembly.Installation can be done in both vertically and horizontally, while the rotatable tweeter allows optimal orientation positioning.

MERO 6

MERO 2

The selection of high-grade materials in combination with accurate acoustics craftmanship makes the MERO speakers superior in their class. The largest MERO6 consists of a 6” aluminum cone woofer and complementary 1” dome tweeter that are smoothly matched and optimized using a high-quality crossover network.

An acoustically optimized waveguide matches the dispersion of woofer and tweeter, while a phase-plug reduces diffraction and enhances off-axis high frequency response. All these details share their part to its pure sound.

An elegant look with minimal visual impact is created by the slim grill with very thin border, while great ease and installers convenience is guaranteed using the quick-fix mechanism with Gold-CON connectivities. The grill is held in place using neodymium magnets, providing a quick and stable assembly.Installation can be done in both vertically and horizontally, while the rotatable tweeter allows optimal orientation positioning.

The ultra-compact size enables the MERO2 smoothly integrate into any interior like no other loud-speaker. The outer dimensions which measure only 106 x 152 mm and the built-in depth which doesn't exceed 66 mm allows installation in any location and into any surface while being unobtru-sive.

The sound is originated by a 2" driver which provides a full-range, warm and detailed sound, with an improved response in the low frequencies due to the ported enclosure with closed back can. This way, a smooth sound reproduction with clear and crisp sound is guaranteed.

An elegant look with minimal visual impact is created by the slim grill with a very thin border, while great ease and installers convenience is guaranteed using the quick-fix mechanism with Gold-CON connectors. The grill is held in place using neodymium magnets, providing a quick and stable as-sembly.

8OHM

97

Max Power RMS Power Max SPL Sensitivity1W / 1m

Drivers Frequency Response±3 dB

Dimensions(W x H x D)

MERO 2 20W 10W 93 dB 83 dB 2" 120 Hz - 20 kHz 106 x 152 x 70 mm

MERO 5 100W 50W 102 dB 85 dB 1"HF + 5"LF 70Hz - 20kHz 162 x 237 x 74 mm

MERO 6 120W 60W 106 dB 88 dB 1"HF + 6"LF 55Hz - 20kHz 197 x 277 x 82 mm

Technical Highlights

Central Station, Antwerp Belgium runs on Audac

CS SeriesCuban speakers

The uniquely designed CUBAN loudspeakers are flush-mounted ceiling or wall speakers, which provide high-quality, wide-dispersion with a high efficiency while remaining as discreet as possible. They answer the need with it’s ability of generating a great sound with very little power. In fact, the Cuban speakers can generate a sound from solid surfaces by utilizing only 3 to 25 Watts. A built-in self resetting protection circuit guarantees a long lifetime without any loss of quality and power.

The construction of the housing is made of strong metal with easy mounting springs for quick and comfortable installation, and the front finish is a small-perforated designer grill with an aluminium frame.

CS2.1The CS2.1 Cuban Speaker features a 2" full range loudspeaker with a shielded neodymium magnet, which is capable of producing up to 10 W RMS, with a maximum of 20W. The standard speaker impedance is 8 Ohm, but through an additional 100V Line transformer, it can also be used on 100V PA systems.

8OHM

98

Max Power RMS Power Max SPL Sensitivity1W / 1m

Impedance Frequency Response±3 dB

Dimensions(W x H x D)

Weight

CS2.1 20 W 10 W 95 dB 85 dB 8 Ω 250Hz - 18kHz 102x102x90 mm 0.52 Kg

Technical Highlights

CS3.1The CS3.1 Cuban Speaker features a 3 1/8" full range loudspeaker with a shielded neodymium magnet, that is capable of producing up to 20 W RMS, with a maximum of 40W. The standard speaker impedance is 8 Ohm, but through an additional 100V Line transformer, it can also be used on 100V PA systems.

Also available in white (CS3.1W)

CS3.2The CS3.2 Cuban Speaker features a 1" soft dome tweeter and a 3 1/8" full range loudspeaker with a shielded neodymium magnet, that is capable of producing up to 20 W RMS, with a maximum of 40W. The standard speaker impedance is 8 Ohm, but through an additional 100V Line transformer, it can also be used on 100V PA systems.

8OHM

8OHM

99

Max Power RMS Power Max SPL Sensitivity1W / 1m

Impedance Frequency Response±3 dB

Dimensions(W x H x D)

Weight

CS3.1 40 W 20 W 103 dB 90 dB 8 Ω 200Hz - 19kHz 122x122x106 mm 0.95 Kg

CS3.2 40 W 20 W 102 dB 86 dB 8 Ω 180Hz - 20kHz 192x122x106 mm 1.28 Kg

Technical Highlights

100VOLT

8OHM

16OHM

100VOLT

8OHM

16OHM

CS SeriesCeiling speakers

The CS series are elegant ceiling loudspeakers, designed for use in any possible application where a sound system without obvious speakers is needed. They are made of high quality components, to ensure a beautiful warm sound reproduction of music and speech. Furthermore, they all have an integrated 100V line transformer with several power tappings, whereby they can be used in standard low impedance Hi-Fi or larger 100V PA systems. The cone is moisture-proof treated, so they can be used in damp rooms and outside applications, the grill and housing can also be painted to integrate seamlessly into any interior.

CS85-CS85DThe CS85 is a 2-way extremely high quality loudspeaker with a 8" driver for the low frequency’s, and 1" coaxial tweeter mounted in the centre. It is capable of producing up to 10W RMS, with a maximum of 80W.

It ensures a brilliant reproduction of all kinds of music, and is fitted with a 100V line transformer. There are different power taps available for 24W, 12W and 6W at 100V.

CS75-CS75DThe CS75 is a 2-way high quality loudspeaker with a 5" driver for the low frequencies,

and 1" coaxial tweeter mounted in the centre. It is capable of producing up to 30 RMS, with a maximum of 60W.

It ensures a brilliant reproduction of all kinds of music, and is fitted with a 100V line transformer. There are different power taps available for 24W, 12W and 6W at 100V.

Available in white (/W), black (/B) and 16 Ohm version (/D).

Available in white (/W), black (/B) and 16 Ohm version (/D).

100

Max Power RMS Power Max SPL Sensitivity1W / 1m

Power Taps - Impedance Frequency Response±3 dB

Dimensions(ø x D)

Weight

CS85 80 W 40 W 112 dB 94 dB 24 / 12 / 6 Watt - 8 Ω 40Hz - 20kHz ø 275x90 2 Kg

CS85/D 80 W 40 W 112 dB 94 dB 16 Ω 40Hz - 20kHz ø 275x90 1.9 Kg

CS75 60 W 30 W 104 dB 97 dB 24 / 12 / 6 Watt - 8 Ω 60Hz - 20kHz ø 205x90 1.6 Kg

CS75/D 60 W 30 W 104 dB 97 dB 16 Ω 60Hz - 20kHz ø 205x90 1.5 Kg

Technical Highlights

100VOLT

8OHM

CS74The CS74 is a 2-way high quality loudspeaker with a 5" driver for the low frequencies, and 1" coaxial tweeter mounted in the centre. It is capable of producing up to 30W RMS, with a maximum of 60W.

It ensures a brilliant reproduction of all kinds of music, and is fitted with a 100V line transformer.

There are different power taps available for 6W, 3W and 1.5W at 100V.

floating restaurant De Limonadefabriek, The Netherlands runs on Audac

Available in white (/W) and black (/B).

101

Max Power RMS Power Max SPL Sensitivity1W / 1m

Power Taps - Impedance Frequency Response±3 dB

Dimensions(ø x D)

Weight

CS74 60 W 30 W 104 dB 90 dB 6 / 3 / 1.5 Watt - 8 Ω 60Hz - 18KHz ø 205x90 1.5 Kg

Technical Highlights

16OHM

100VOLT

CS55-CS55DThe CS55 is a professional single cone loudspeaker with a 4 1/3" driver that is capable of producing a power up to 10W RMS, with a maximum of 20W.

It ensures a good reproduction of speech and background music in all situations, and is fitted with a 100V line transformer with different power taps for 6W, 3W and 1.5W at 100V.

Available in white (/W), black (/B) and 16 Ohm version (/D).

CSE100The CSE100 is the red LED unit that is integrated in the CSE55 speaker, and can also be ordered separately, to use as visual alarm system in other applications. It works on a supply voltage of 24V DC, and has a current consumption of 45 mA. The light intensity is 24 lumen and it has a radiation angle of 120°.

102

100VOLT

CSE55-CSW55The CSE55/CSW55 are professional ceiling speakers with an integrated LED light signal that can be used as visible alarm signal.

They feature a 4 1/3" single cone loudspeaker which is capable of producing up to 10W RMS, with a maximum of 20W, and ensures good reproduction of speech and background music in all situations. The speaker is fitted with a 100V line transformer and there are different power taps available for 6W, 3W and 1.5W at 100V.

The integrated LED units are available in two different colors: red (CSE55) or white (CSW55), and deliver a light intensity of 24 Lumen on a supply voltage of 24 V DC.

103

Max Power RMS Power Max SPL Sensitivity1W / 1m

Power Taps Frequency Response±3 dB

Dimensions(ø x D)

Weight

CSE55 20 W 10 W 109 dB 93 dB 6 / 3 / 1.5 Watt 70Hz - 14kHz ø 205x70 900 g

CSW55 20 W 10 W 109 dB 93 dB 6 / 3 / 1.5 Watt 70Hz - 14kHz ø 205x70 900 g

CS55 20 W 10 W 109 dB 93 dB 6 / 3 / 1.5 Watt 70Hz - 14kHz ø 205x70 780 g

CS55/D 20 W 10 W 109 dB 93 dB 16 Ω 70Hz - 14kHz ø 205x70 730 g

Technical Highlights

100VOLT

100VOLT

CSF506 MK2

Ceiling speaker with fire domeThe CSF506MKII is a fire-protected ceiling speaker with a 5" cone, capable of producing a power of 6W. It ensures a good reproduction of speech and background music. It is fitted with a 100V line transformer with heat-proof ceramic power taps for 6W and 3W to be used in large 100V PA systems.

The speaker is equipped with a special steel fire protection dome fitted around the speaker and a steel front grill with flame retardant materials. This ensures the fire protection according to the EN60849 standard.

CSA506The CSA506 is a budget friendly ceiling speaker with a 5" cone, capable of producing a power of 6W. It ensures a good reproduction of speech and background music. It is fitted with a 100V line transformer with power taps for 6W and 3W to be used in large 100V PA systems.

The speaker is constructed in a way that the framework is also used as base construction for the speaker cone. Therefore, the speaker's built-in depth is reduced to only 6 cm, and the weight is reduced to 500g. It has Quick- mounting clamps,

104

Max Power RMS Power Sensitivity1W / 1m

Power Taps Frequency Response±3 dB

Dimensions(ø x D)

Weight

CSA506 10 W 6 W 93 dB 6 / 3 Watt 100Hz - 15kHz ø 175x60 mm 0.5 Kg

CSF506MKII 10 W 6 W 90 dB 6 / 3 Watt 90Hz - 18kHz ø 180x127 mm 1.3 Kg

Technical Highlights

CS424The CS424 is a High-Quality 2-Way ceiling speaker, consisting of a 4” woofer and a coaxially mounted 1” tweeter. The High-Quality components in combination with the steel back can provide premium performance for background music as well as paging systems, no matter what kind of ceiling of surface the speaker is mounted to.

The power of 30 Watt, wide frequency response and low distortion makes the speaker perfectly suited for applications requiring a higher fidelity of music such as restaurants, retail stores, professional offices, and many other applications.

The integrated 100 Volt line transformer makes the speaker suitable for use in large 100 Volt Public Address systems. The power can be selected in three steps of impedance for 100 Volt applications and an 8 Ohm tapping for low impedance applications using the rotary switch behind the front grill.

The connection of the speaker can be done using the 4-pin Terminal block connector at rear side of the back can, allowing parallel link-through to other speakers. Installing the speaker can be accomplished in seconds, without requiring access above the ceiling, using the simple quick-fixing mechanism.

CS660The CS660 is a High-Quality 2-Way ceiling speaker, consisting of a 6.5” woofer and a coaxially mounted 1” tweeter. The High-Quality components in combination with the steel back can provide premium performance for background and foreground music as well as paging systems, no matter what kind of ceiling of surface the speaker is mounted to.

The high power of 60 Watt, wide frequency response and low distortion makes the speaker perfectly suited for applications requiring a higher fidelity of music such as bars, restaurants, hotels and many other applications. Even when installed in ceilings, high up above the audience.

The integrated 100 Volt line transformer makes the speaker suitable for use in large 100 Volt Public Address systems. The power can be selected in three steps of impedance for 100 Volt applications and an 8 Ohm tapping for low impedance applications using the rotary switch behind the front grill.

The connection of the speaker can be done using the 4-pin Terminal block connector at rear side of the back can, allowing parallel link-through to other speakers. Installing the speaker can be accomplished in seconds, without requiring access above the ceiling, using the simple quick-fixing mechanism

100VOLT

100VOLT

Terminal Connector

Terminal Connector

8OHM

8OHM

105

Max Power RMS Power Sensitivity1W / 1m

Power Taps / Impedance Frequency Response±3 dB

Dimensions(ø x D)

Weight

CS660 120 W 60 W 87 dB 60/ 30/ 15 Watt/ 8 Ω 65Hz - 20kHz ø 250 x210 mm 3.1 Kg

CS424 60 W 30 W 86 dB 24/ 12/ 6/ Watt / 8 Ω 130Hz - 20kHz ø 205 x182 mm 1.9 Kg

Technical Highlights

100VOLT

8OHM

8OHM8

OHM

SSP500Flush mount sauna speakerThe SSP500 is a flush mount loudspeaker, especially designed to be used in rooms with a very high temperature and level of humidity, such as Sauna's, bathrooms, swimming pool area's, ...

It has an perforated aluminum grill with an ABS surround, finished in an off-white color. This gives the loudspeaker a modern and attractive look, making it blend into all different kinds of interiors. To make it even more complementary to the environment, the front can easily be painted to the desired colour.

The sound is generated by a 2-way loudspeaker section capable of producing a power of 20 Watt RMS, which is built from a 5" cone driver and a 1" tweeter, producing a natural and detailed sound which overall will be highly appreciated.

Due to the polypropylene cone, the ABS basket and the high quality of the used materials, the SSP500 can withstand in environments with extreme levels of humidity and temperature.

• Heat resistant up to 100°C

• Humidity resistant

• Polypropylene cone

• IP44

AWP06Waterproof ceiling speakerThe AWP06 is a waterproof ceiling speaker with a power of 6 Watt, which meets the IP65 standard. It is designed to be used in a wide variation of in- and outdoor applications and damp locations and features a 4" loudspeaker.

Due to its wide smooth frequency response and high efficiency, it ensures high-fidelity music reproduction and intelligible speech at very low distortion. It can be used in 8 Ohm low impedance systems, or in 100V PA systems with power taps for 6W, 3W and 1.5W.

106

Max Power RMS Power Max SPL Sensitivity1W / 1m

Power Taps - Impedance Frequency Response±3 dB

Dimensions(ø x D)

Weight

AWP06 10 W 6 W 95 dB 87 dB 6W / 3W / 1.5W / 8Ohm 100Hz - 15kHz ø 140x130 mm 0.95 Kg

Technical Highlights

M ax Power RMS Power Max SPL Sensitivity1W / 1m

Impedance Frequency Response±3 dB

Dimensions(ø x D)

Weight

SSP500 40 Watt 20 Watt 99 dB 86 dB 8 Ω 75Hz - 20 kHz Ø 165 mm x 74 mm 0.62 Kg

Technical Highlights

107

WS524-WS524/D The WS524 is a 2-way elegant square in-wall loudspeaker for high-quality installation. The loudspeaker combination is fitted with a 4 ¾" low frequency speaker with a very powerful magnet and a coaxially placed 1" silk soft dome high frequency tweeter. There are power tappings provided for 24W, 12W and 6W at 100V.

(Also available in 16 Ohm version: WS524/D)

WS624-WS624/D The WS624 is a 2-way rectangular in-wall loudspeaker for high-quality installation. The loudspeaker combination is fitted with a 4 ¾" low frequency speaker with a very powerful magnet and a coaxially placed 1" silk soft dome high frequency tweeter. There are power tappings provided for 24W, 12W and 6W at 100V.

(Also available in 16 Ohm version: WS624/D)

100VOLT

8OHM

16OHM

100VOLT

8OHM

16OHM

108

CS1000SThe CS1000S is a 10" in-wall / ceiling subwoofer with a super slim design, to be used in combination with the CS and WS series speakers. It is capable of producing an output power of 100W RMS, with a maximum of 200W at 8 Ohm, a sound pressure level up to 114 dB, and has a stunning frequency response between 28 Hz and 250 Hz.

It ensures a brilliant reproduction of the low frequencies.

8OHM

109

Max Power RMS Power Max SPL Sensitivity1W / 1m

Power Taps - Impedance Frequency Response±3 dB

Dimensions(W x H x D)

Weight

WS524 60 W 30 W 107 dB 92 dB 24 / 12 / 6 Watt - 8 Ω 60Hz - 20kHz 180x180x85 mm 1.4 Kg

WS524/D 60 W 30 W 107 dB 92 dB 16 Ω 60Hz - 20kHz 180x180x85 mm 1.3 Kg

WS624 60 W 30 W 107 dB 92 dB 24 / 12 / 6 Watt - 8 Ω 60Hz - 20kHz 280x192x75 mm 1.72 Kg

WS624/D 60 W 30 W 107 dB 92 dB 16 Ω 60Hz - 20kHz 280x192x75 mm 1.62 Kg

CS1000S 200 W 100 W 108 dB 88 dB 8 Ω 50Hz - 250Hz 304x304x104 mm 3.6 Kg

Technical Highlights

WS500The WS500 is a 10 Watt design wall loudspeaker with a curved ABS shape and a white coated aluminium grill, making it perfect for use in special design applications.

It is fitted with a 5 ½" moisture proof broadband loudspeaker and has power tappings for 10 W and 5 W at 100V.

CSS556The CS556 is a 10 Watt surface mount loudspeaker that is designed to be used in all kinds of applications where there is no possibility to integrate speakers into walls or ceilings. It features a 6” full range loudspeaker which is suitable for background music an announcements and is fitted with a line transformer with power taps for 6W and 3W. 100

VOLT

100VOLT

WS SeriesWall speakers

The WS series are elegant surface mount and in-wall loudspeakers, designed for use in any possible application where is need for a sound system without obvious speakers. They are made of high quality components, to ensure a beautiful warm sound reproduction of music and speech. Furthermore, they all have an integrated 100V line transformer with several power tappings, whereby they can be used in standard low impedance Hi-Fi or larger 100V PA systems. The cone is moisture-proof treated, so they can be used in damp rooms or in outside applications, the grill and housing can be painted to integrate seamlessly into your interior.

110

Max Power RMS Power Max SPL Sensitivity1W / 1m

Power Taps Frequency Response±3 dB

Dimensions(W x H x D)

Weight

WS500 20 W 10 W 99 dB 91 dB 10 / 5 Watt 110Hz - 13kHz 240x340x100 mm 1.62 Kg

CSS556 15 W 10 W 99 dB 91 dB 6 / 3 Watt 110Hz - 18kHz ø170x79 mm 2.4 Kg

Technical Highlights

St. Anna Church, Maaseik runs on Audac111

Type Polar Pattern Impedance Freq Response Sensitivity Dynamic Range Phantom Power Dimensions(ø x H)

Weight

CMX200/35 Condenser Cardioid 250 Ohm 50Hz - 16kHz 45 dB ± 3 dB 113 dB 15 - 52V DC ø 19x400 mm 120 g

CMX200/55 Condenser Cardioid 250 Ohm 50Hz - 16kHz 45 dB ± 3 dB 113 dB 15 - 52V DC ø 19x600 mm 150 g

Technical Highlights

CMX200Conference microphoneThe CMX200-series are 360° revolving pipe-neck condenser microphones, designed to be used for conferences, sound reinforcements, translations and studio applications. It has a high sensitive condenser element with a unidirectional cardioid polar pattern which ensures an excellent sound quality and reduces the feedback to a strict minimum, even when exposed to vigorous, hard sound.

Thanks to its flat frequency characteristic, the CMX200 ensures a permanent high-fidelity sound, true to the user’s voice and intonation. The dark grey color and slimline design permit a discreet blending with every possible interior or background.

It is available in two different lengths, making it suitable for any specific speech application. The 35 cm version can be used for most general speech applications where the microphone is placed on tables or desks, while the 55 cm version is mainly used for placing on altars.

Type Polar Pattern Impedance Freq Response Sensitivity Dynamic Range Phantom Power Dimensions(ø x H)

Weight

CMX210/35 Condenser Cardioid 250 Ohm 50Hz - 16kHz 45 dB ± 3 dB 113 dB 15 - 52V DC ø 19x438 mm 120 g

CMX210/55 Condenser Cardioid 250 Ohm 50Hz - 16kHz 45 dB ± 3 dB 113 dB 15 - 52V DC ø 19x638 mm 150 g

Technical Highlights

30°330°

300° 60°

90°270°270°

240° 120°

150°210° 180°

CMX210Pipe-neck condenser microphoneThe CMX210 is a pipe-neck condenser microphone which is fitted on a slim flexing gooseneck with an XLR base. It features a back-electret condenser capsule with cardioid pickup pattern for universal miking. The flexible element allows precise alignment of the microphone, enabling placement on tables, lecterns, altars, …

The wide dynamic range and frequency response with low noise level guarantee an excellent sound quality for a wide variety of applications such as houses of worship, conference rooms, auditoria, etc.

Sensitivity Dynamic Range Phantom Power Dimensions Weight

30°330°

300° 60°

90°270°

240° 120°

150°210° 180°

Pipe-neck condenser microphoneThe CMX210 is a pipe-neck condenser microphone which is fitted on a slim flexing gooseneck with an XLR base. It features a back-electret condenser capsule with cardioid pickup pattern for universal miking. The flexible element allows precise alignment of the microphone, enabling placement on tables, lecterns, altars, …

The wide dynamic range and frequency response with low noise level guarantee an excellent sound quality for a wide variety of applications such as houses of worship,

112

CMX45/55Gooseneck microphoneThe CMX45/55 are small and elegant electret gooseneck microphones, perfect for high-quality reproduction of speech and therefore suitable for conferences, chuch services and seminars. The cardioid polar pattern ensures that the microphone is insensitive to feedback loops.

The microphone is mounted on a flexible gooseneck which allows perfect placement of the microphone, it features a balanced XLR connection and is standard delivered with a black pop shield.

The difference between the CMX45/55 microphones is the length of the gooseneck, respectively 45 and 55 cm.

30°330°

300° 60°

90°270°

240° 120°

150°210° 180°180°

CMX230Compact shotgun microphoneThe CMX230 is a professional shotgun microphone existing of an back-electret condenser capsule which is fitted on a flexing gooseneck with an XLR base. The compact size, high directivity and pointability makes them suitable for a range of applications such as conference, public address, announcements, …

The wide frequency response and low noise level guarantee an excellent sound quality, while the directive characteristics discriminates unwanted noise.

placement of the microphone, it features a balanced XLR connection and is standard delivered with a black pop shield.

The difference between the CMX45/55 microphones is the length of the gooseneck, respectively 45 and 55 cm.

placement of the microphone, it features a balanced XLR connection and is standard delivered with a black pop shield.

The difference between the CMX45/55 microphones is the length of the gooseneck, respectively 45 and 55 cm.

placement of the microphone, it features a balanced XLR connection and is standard delivered with a black pop shield.

The difference between the CMX45/55 microphones is the length of the gooseneck, respectively 45 and 55 cm.

APMMicrophone baseThe APM is a microphone base, designed to be used with the CMX series gooseneck microphones (or any other gooseneck microphone with XLR connector) on any amplifier with microphone inputs.

There’s a female XLR connector on top, to mount the gooseneck microphone, and a male XLR connector at the back to connect the microphone cable.

The APM microphone base is very stable and features the same design as the APM paging microphones, to blend fully with the other equipment.

30°330°

300° 60°

90°270°

240° 120°

150°210°210° 180°180°

113

Type Polar Pattern Impedance Freq Response Sensitivity Dynamic Range Phantom Power Dimensions(ø x H)

Weight

CMX45 Back Electret Condenser Cardioid 2200 Ohm 150Hz - 20kHz 42 dB ± 3 dB 120 dB 9 - 52V DC ø 19x453 mm 155 g

CMX55 Back Electret Condenser Cardioid 2200 Ohm 150Hz - 20kHz 42 dB ± 3 dB 120 dB 9 - 52V DC ø 19x553 mm 180 g

CMX230 Back Electret Condenser Supercardioid 250 Ohm 50Hz - 18kHz 42 dB ± 3 dB 113 dB 12 - 52V DC ø 19x280 mm 250 g

Technical Highlights

CMX700Clip-on ear microphoneThe CMX700 is an omni-directional clip-on ear microphone designed for vocal and speech applications. Thanks to the flat frequency response characteristic which guarantees high-fidelity sound reproduction, voices will be reproduced in a natural way.

Because of the EMI and low noise suppression, low frequencies are repressed, shutting out hum and interference caused by other sources, which improves the sound reproduction quality, making it suited for vocal applications. The unique tiny size and super light weight provide a comfortable and optimum fit for any occasion.

It is available in black and Skin Color with two different connector versions, 3.5mm Mini-Jack and 4-Pole Mini-XLR.

CMX700/BX (black color with 4-Pole Mini-XLR)CMX700/SX (Skin color with 4-Pole Mini-XLR)CMX700/BJ (black color with 3.5mm Mini-Jack)

CMX720Headset microphoneThe CMX720 is an omni-directional headset microphone designed for vocal and speech applications, ranging from speeches to aerobic lessons. The flat frequency response and the high Sound Pressure level ensure a high-fidelity sound reproduction, true to the user’s voice and intonation, even when a hard and vigorous sound is applied.

The omnidirectional pattern reduces the feedback to a minimum. The tiny design doesn’t decrease its performance, but enhances the user’s comfort and makes wearing it almost unnoticable, both to speaker and audience.

It is available in black with two different connector versions, 3.5mm Mini-Jack and 4-Pole Mini-XLR.

CMX720/BX (black color with 4-Pole Mini-XLR)CMX720/BJ (black color with 3.5mm Mini-Jack)

Type Polar Pattern Impedance Freq Response Sensitivity Dynamic Range Phantom Power Dimensions(ø x H)

Weight

CMX700 Back Electret Condenser Omnidirectional 1000 Ohm 20Hz - 20kHz -45 dB ± 3 dB 130 dB 1.5 - 10V DC ø 5 mm 12 g

CMX720 Back Electret Condenser Omnidirectional 1000 Ohm 20Hz - 20kHz -44 dB ± 3 dB 130 dB 1.5 - 10V DC ø 5 mm 19 g

Technical Highlights

30°330°

300° 60°

90°270°

240° 120°

150°210° 180°

30°330°

300° 60°

90°270°

240° 120°

150°210° 180°

114

30°330°

300°300° 60°

90°270°

240° 120°

150°210° 180°

30°330°

300° 60°

90°270°

240° 120°

150°210° 180°

CMX705Clip-on ear microphoneThe CMX705 is an omnidirectional clip-on ear microphone designed for vocal and speech applications. Thanks to the flat frequency response characteristic, which guarantees high-fidelity sound reproduction, voices will be reproduced in a natural way.

Because of the EMI and low noise suppression, low frequencies are repressed, shutting out hum and interference caused by other sources, which improves the sound reproduction quality, making it suited for vocal applications. The unique tiny size and super light weight provide a comfortable and optimum fit for any occasion.

It is available in black and Skin Color and comes with 4 different replaceable connectors making it suitable for use with beltpacks of various major manufacturers.

CMX725Headset microphoneThe CMX725 is an omnidirectional headset microphone designed for vocal and speech applications, ranging from speeches to aerobic lessons. The flat frequency response and the high Sound Pressure level ensure a high-fidelity sound reproduction, true to the user’s voice and intonation, even when a hard and vigorous sound is applied.

The omnidirectional pattern reduces the feedback to a minimum. The tiny design doesn’t decrease its performance, but enhances the user’s comfort and makes wearing it almost unnoticeable, both to speaker and audience.

It is available in black and Skin Color and comes with 4 different replaceable connectors making it suitable for use with beltpacks of various major manufacturers.

dB Technologies 3.5mm plug

Sennheiser 3.5mm stereo plug

AKG 3-pin mini XLR

Shure 4-pin mini XLR

115

Type Polar Pattern Impedance Freq Response Sensitivity Dynamic Range Phantom Power Dimensions(ø x H)

Weight

CMX705 Back Electret Condenser Omnidirectional 1800 Ohm 20Hz - 20kHz -46 dB ± 3 dB 135 dB 1.5 - 12V DC ø 5 mm 12 g

CMX725 Back Electret Condenser Omnidirectional 2000 Ohm 20Hz - 20kHz -46 dB ± 3 dB 135 dB 1.5 - 12V DC ø 5 mm 19 g

Technical Highlights

30°330°

300° 60°

90°270°

240° 120°

150°210° 180°

30°330°

300° 60°

90°270°

240° 120°

150°210° 180°

M66/67Vocal microphoneThe M66 and M67 are fully featured, dynamic, general purpose microphones for the budget conscious performer who wants style, audio quality and a product that works hard. They are solidly constructed, with a robust grill to protect the diaphragm against rough handling, and are suited for indoor as well as outdoor use. The high sensitive neodymium element makes them the perfect microphones for presentations and singers. Due to the unidirectional (supercardioid) polar pattern, the feedback is reduced to a strict minimum.

The M66 and M67 are both exactly the same microphones with the same specifications, except the on/off switch which is only provided on the M67.

M86/87Vocal microphone

The M86 and M87 are professional and reliable super cardioid dynamic microphones which are perfect suited for on stage use. They are solid constructed with a robust grill to protect the diaphragm against rough handling, and are suited for indoor as well as outdoor use. The high sensitive neodymium element ensures a perfect reproduction of music and speech that will be loved by a wide variation of singers and musicians. This makes them the perfect microphones for performers and instruments. Due to the unidirectional (supercardioid) polar pattern, the feedback is reduced to a strict minimum.

The M86 and M87 are both exactly the same microphones with the same specifications, except the on/off switch which is only provided on the M87.

PDM200Paging microphoneThe PDM200 paging microphone is a polyvalent dynamic gooseneck microphone, mounted on a solid very stable base, and fitted with a three function switch: permanently on, momentary on, and off.

It also contains an RC network for the operation of chime modules, and is equipped with a 1.5 meters long connection cable.

The PDM200 is fully compatible with AUDAC COM-series amplifiers, but can also be adjusted for other applications.

30°330°

300° 60°

90°270°

240° 120°

150°210° 180°

116

Type Polar Pattern Impedance Freq Response Sensitivity Dimensions(ø x H)

Weight

M66/67 Dynamic Super Cardioid 300 Ohm 50Hz - 18kHz -75 dB ± 3 dB ø 49 x 182 mm 300 g

M86/87 Dynamic Super Cardioid 300 Ohm 50Hz - 18kHz -74 dB ± 3 dB ø 51 x 178 mm 350 g

PDM200 Dynamic Cardioid 600 Ohm 80Hz - 12kHz -72 dB ± 3 dB 162x122x368 mm 810 g

Technical Highlights

30°330°

300° 60°

90°270°

240° 120°

150°210° 180°

CMT500Acoustic reference microphoneThe CMT500 is an acoustic reference microphone with an omnidirectional pickup pattern based on a small & accurate back electret condenser capsule.It is especially designed to be used for all kinds of measurement applications, such as noise monitoring purposes, room acoustic measurements or speaker measurements.

In combination with the CMT510 outdoor kit, the CMT500 can also be used for permanent outdoor installation in all weather conditions. This combination

makes the CMT500 the perfect solution for permanent outdoor noise monitoring systems.

330°

300°

90°270°

240° 120°

150°210° 180°

CMT510 kit

CMX380Hanging microphone

The CMX380 is a mini hanging cardioid microphone designed to be used in choirs, instrumental groups and theatres, but it’s technical qualities and design will also

justify its use in several recording / reproduction applications.

The unidirectional cardioid polar pattern reduces feedback to an absolute minimum. Due to the flat frequency characteristic, users, musicians, singers and performers

will experience a clear natural reproduction of their instrument or voice, even when exposed to loud, powerful sounds.

The slimline modest design will not distract the attention from the vocal or instrumental performance, and will flawlessly blend into the background.

117

30°

60°

makes the CMT500 the perfect solution for permanent outdoor noise monitoring systems.

CMT510 kitCMT510 kit

Type Polar Pattern Impedance Freq Response Sensitivity Dynamic Range Phantom Power Dimensions(ø x H)

Weight

CMX380 Back Electret Condenser Cardioid 200 Ohm 50Hz - 18kHz -42 dB ± 3 dB 113 dB 11 - 52V DC ø 13.5x55mm 150 g

CMT500 Back Electret Condenser Omnidirectional <2200 Ohm 20Hz - 20kHz -40 dB ± 3 dB 108 dB 15 - 52V DC ø 38x152 mm 150 g

Technical Highlights

30°330°

300° 60°

90°270°

240° 120°

150°210° 180°

HM150Handheld microphone

The HM150 is a sturdy CB type handheld microphone, with an easy to use Push To Talk switch at its side. This omnidirectional dynamic microphone is designed for close talking applications and is ideal for paging messages. The built-in 2-pole non latching switch activates the microphone when pressed.

A metal wall mounting clip is provided with the microphone. The HM150 is fitted with a 5-pin XLR connector. 2 of these pins are used for chime activation.

CMP401Microphone power adapterThe CMP401 is a simple to use microphone power adapter for phantom power type condenser microphones, especially for headset and lavalier microphones. It features a gold plated 4 pole male Mini-XLR input connector and a gold plated 3 pole male XLR output connector. An internal circuit transforms the 48V phantom supply voltage into a voltage between 1.5V and 10V, needed for the microphone. Two switches on the side allow you to adust the gain or activate low frequency cutoff.

The CPM401 is delivered with a belt clip.

APT20Phantom power supplyThe APT20 is a phantom power supply unit for use with two condenser microphones. It supplies 48V DC to the microphones and routes the signal to a mixer or microphone amplifier. It features XLR connections for in- and output, and at the back is an euro IEC power connection with power switch provided.

Optional MBS200 Mounting bracket

118

Type Polar Pattern Impedance Freq Response Sensitivity Dimensions(ø x H)

Weight

HM150 Dynamic Omnidirectional 600 Ohm 100Hz - 10kHz -78 dB ± 3 dB 60 x 100 x 50 mm 165 g

Technical Highlights

100V

70V

50V

33V

COM

+

-

GND

ALI20/25Audio line isolatorThe ALI20/25 are Audio Line Isolators, designed to isolate audio devices from each other, in most cases they are used to avoid hum, caused by ground loops in audio systems.

They offer a complete passive solution for the isolation of a stereo balanced audio signal. It features dual XLR in- and output connectors and a ground lift switch. The in- and output phase are matching.

The ALI20/25 are both built with an audio transformer that has a turns ratio of 1:1 and an impedance of 600 Ohm.

The difference is the shielding of the transformer. The ALI20 contains a shielded transformer that complies with the requirements of most standard applications. While the ALI25 contains a MU-metal shielded transformer that can be used when regular shielding becomes inadequate. This ensures the best results in even the highest EMI polluted environments.

ATU44Universal input adapterThe ATU44 is a universal input adapter suitable for a wide varity of connections and extensions.

It can be used for converting any loudspeaker level into a balanced or unbalanced Line level signal. It has inputs for 100V, 70V, 50V, 33V and standard 8 Ohm low impedance speaker signals.

A second possibility is converting an unbalanced line level signal into a balanced one, and vice versa.

The switch on the frontpanel allows you to select between converting a speakersignal into a line level signal, or the conversion of line level signals.

The inputs and outputs are completely galvanically isolated by means of an audio isolation transformer. This makes the ATU44 the perfect solution for solving hum and buzz problems caused by ground loops.

TR 106 TR 266

119

TR3000 SeriesLine transformersThe TR3000 is a range of line transformer combinations, existing of the TR3000 19" installation plate and several line transformers.

The TR3000 is a 19" 2HE installation plate to mount the TR3000 series line transformers. On this plate almost any combination of line transformers can be mounted, providing a stable and rigid construction for any 100V application. Depending on the power of the desired transformer, up to 6 transformers can be mounted on the T3000 installation plate.

The TR3xxx offers a range of line transformers with a power ranging from 30 Watt up to 480 Watt.

There are different tappings available for 50V, 70V and 100V lines, and the low impedance side is selectable between 2 Ohm, 4 Ohm and 8 Ohm.

All these transformers are designed to be mounted on the TR3000 installation plate and are supplied with all necessary accessories for mounting.

120

Max Power Connectors Construction Power Taps Impedance Dimensions(ø x D)

Weight

TR3030 30 W 20 cm cable Copper 50V / 70V / 100V 2 / 4 / 8 Ω 80 x 50 mm 0.950 Kg

TR3040 40 W 20 cm cable Copper 50V / 70V / 100V 2 / 4 / 8 Ω 85 x 50 mm 1.230 Kg

TR3060 60 W 20 cm cable Copper 50V / 70V / 100V 2 / 4 / 8 Ω 85 x 60 mm 1.270 Kg

TR3080 80 W 20 cm cable Copper 50V / 70V / 100V 2 / 4 / 8 Ω 90 x 65 mm 1.600 Kg

TR3120 120 W 20 cm cable Copper 50V / 70V / 100V 2 / 4 / 8 Ω 105 x 65 mm 2.420 Kg

TR3240 240 W 20 cm cable Copper 50V / 70V / 100V 2 / 4 / 8 Ω 130 x 65 mm 4.500 Kg

TR3480 480 W 20 cm cable Copper 50V / 70V / 100V 2 / 4 / 8 Ω 170 x 65 mm 7.020 Kg

Technical Highlights

IP66IP66

TR1000 SeriesLine transformersThe TR1000 series are 100 Volt line transformers, designed for impedance matching between loudspeakers and amplifiers. They are used for converting low impedance speakers allowing them to be used in 100V PA installations where long cableruns can be used.

The transformers have an over-dimensioned core, that limits saturation to a minimum and gives remarkable improvement of the sound reproduction quality, especially in the low frequencies.

There are several power tappings available for 100V, and depending of the transformer that’s used, the output impedance can also be selected.

TR2000 SeriesGround loop isolatorsThe TR2000 Series are Basic Stereo Ground Loop isolators, designed as problem solvers to electrically isolate audio devices from each other. Hum in audio systems is usually caused by ground loops in the system. The most common and simple method to solve these problems is an audio isolation transformer such as the TR2000 Series.

• TR2050: Stereo Ground Loop Isolator 2 x RCA Male to 2 x RCA Female• TR2060: Stereo Ground Loop Isolator 3.5 mm Jack Male to 2 x RCA Male• TR2070: Stereo Ground Loop Isolator 3.5 mm Jack Male to 3.5 mm Jack Female• TR2080: Stereo Ground Loop Isolator 3.5 mm Jack Male to 2 x XLR Male

WTR06/24Waterproof transformersThe WTR-series are 100 Volt line transformers for impedance matching between Low Impedance Loudspeakers (8 Ohm) and 100 Volt Amplifiers. Using the these transformers, low impedance loudspeakers can be applied to any 100 Volt Public Address system where long cable runs can be used.

The WTR06 has a maximum output power of 6 Watt and different power taps for 6W, 3W and 1.5W. While the WTR24 has an output power of 24 W and taps for 24W, 12W and 6W.

The housing is designed to be water and dust proof, while making it possible to be hidden at any location such as above the false ceilings, in a wall junction boxes, in hollow places inside walls, ... All these features make these transformers comply to an Ingress Protection rating of IP66.

121

Power Taps Output Impedance Dimensions(W x H x D)

Weight

TR1006 6 / 3 / 1.5 Watt 8 Ω 64x36x40 mm 161 g

TR1010 20 / 15 / 10 / 7.5 / 5 / 3 Watt 2 Ω / 4 Ω / 8 Ω 52x60x56 mm 620 g

TR1024 24 / 12 / 6 Watt 8 Ω 52x60x56 mm 360 g

WTR06 6 / 3 / 1.5 Watt 8 Ω 63x53x63 mm 300 g

WTR24 24 / 12 / 6 Watt 8 Ω 63x53x63 mm 400 g

Technical Highlights

VC2200Sixfold volume controller

The VC2200 is a sixfold volume control for 100V loudspeaker systems with a total power up to 200 Watt. The volume is adjustable with 6 control knobs in 12 steps of 3dB, including zero position.

It is equipped with a separate input for the reception of priority signals, and every output is fitted with a relay. When a priority signal occurs, the relay of every output channel will switch to the priority channel, and the priority message will sound on all channels at maximum volume.

VC3208Remote volume controller

The VC3208 is a flush mount wall controller for volume regulation of voltage controlled (0 ~ 10 Volts) amplifiers such as SX408A and AMP20. The volume is fluently controllable using the rotatable dial

with potentiometer.

The connection between the amplifier and the regulator is made using twisted pair CAT5e (or better) cabling fitted with an pluggable terminal block connector.

It is compatible with standard 45 x 45 mm installation materials such as AUDAC, Niko, Legrand, .... .

Available in black (B) and white (W).

122

Channels Max power load Max operation voltage Attenuation Relay Mounting Dimensions(W x H x D)

VC2200 6 200W 100V 11 x 3dB 24V DC - 25mA 19” 482x90x210 mm

Technical Highlights

VC3036/4036100V Wall volume controllerThe VC3036/4036 are 100 Volt wall volume controllers whereby the volume for 100 V loudspeakers can be adjusted in ten steps of 3 dB. The VC3036 is com-patible with Audac, Niko, Legrand and other 45 x 45 mm standard installation materials, while the VC4036 is compatible with BTicino Livinglight installation materials.

An integrated 24 Volt relay with separate priority input allows bypassing of the volume controller in priority situations, making sure the right message is always clearly heard at maximum volume. Connections are made using screw terminal blocks.

Available in black (B) and white (W).

Available in black (B) and white (W).

VC3xx2100V Wall volume controllerThe VC3xx2 Series are 100 Volt wall volume controllers whereby the volume for 100 V loudspeakers can be adjusted in 11 steps of 3 dB. They feature a slim and good looking design and are constructed out of sturdy ABS, making them suitable for big projects in industrial environments as well as standard home interiors. An integrated 24 Volt relay allows bypassing of the volume controller in priority situations, making sure the message is always clearly heard at maximum vol-ume. Connections are made using screw terminal blocks, and flush and surface mount boxes (WB3102) are separately available.

PC3000/4000Wall program selectorThe PC3000 and PC4000 are flush mount wall program selectors for 100V PA installations. The PC3000 is compatible with AUDAC and Niko installation materials, and the PC4000 is compatible with BTicino Livinglight installation materials.

The channel is selectable with a rotatable dial from 5 different sources, and when the “zero" position is selected, no program will come through.

123

Max power load Max operation voltage Attenuation Relay Construction Colour Mounting Dimensions

(W x H x D)

VC3036 36W 100V 9 x 3dB 24V DC - 25mA ABS black & white Audac / Niko 45x45x60 mm

VC4036 36W 100V 9 x 3dB 24V DC - 25mA ABS black & white BTicino Livinglight 43x43x60 mm

VC3022 20W 100V 11 x 3 dB 24V DC - 25mA ABS white 80 x 80 European Std 80x80x50 mm

VC3062 60W 100V 11 x 3 dB 24V DC - 25mA ABS white 80 x 80 European Std 80x80x50 mm

VC3102 100W 100V 11 x 3 dB 24V DC - 25mA ABS white 80 x 80 European Std 80x80x50 mm

Technical Highlights

Programs Relay Construction Colour Mounting Dimensions(W x H x D)

PC3000 5 24V DC - 25mA ABS black & white Audac / Niko 45x45x60 mm

PC4000 5 24V DC - 25mA ABS black & white BTicino Livinglight 43x43x60 mm

Technical Highlights

CP45RCACP43RCA

CP45BNCCP43BNC

CP45XLMCP43XLM

CP45XLFCP43XLF

CP45SPECP43SPE

CP45HDMCP43HDM

CP45VGACP43VGA

CP45LS CP45ARJCP43ARJ

CP45DSZCP43DSZ

Screw Connection

HDMI adaptor plate. Includes Procab BSP602 for HDMI connections.

Rear view

1 Watt RMS 1" loudspeaker250 Hz - 20Khz Freq. response85dB Sound pressure 1W/1m8 Ohm

Wall Junction boxes.

D-Size Hole

124

Connector Dimensions CP45(W x H x D)

Dimensions CP43(W x H x D)

Built-in depth Colors

RCA 2 x RCA 45 x 45 x 25 mm 43 x 43 x 20 mm 45 mm black (/B) & white (/W)

BNC 1 x BNC 45 x 45 x 25 mm 43 x 43 x 20 mm 45 mm black (/B) & white (/W)

VGA 1 x Sub D 15 45 x 45 x 25 mm 43 x 43 x 20 mm 45 mm black (/B) & white (/W)

XLM 1 x D-size XLR Male 45 x 45 x 25 mm 43 x 43 x 20 mm 45 mm black (/B) & white (/W)

XLF 1 x D-size XLR Female 45 x 45 x 25 mm 43 x 43 x 20 mm 45 mm black (/B) & white (/W)

Speaker 1 x D-size Speaker 45 x 45 x 25 mm 43 x 43 x 20 mm 45 mm black (/B) & white (/W)

HDMI 1 x HDMI with Fixscrews 45 x 45 x 25 mm 43 x 43 x 20 mm 45 mm black (/B) & white (/W)

ARJ 1 x RJ45 45 x 45 x 25 mm 43 x 43 x 20 mm 45 mm black (/B) & white (/W)

DSZ D-Size hole 45 x 45 x 25 mm 43 x 43 x 20 mm 45 mm black (/B) & white (/W)

Technical Highlights

CP45XLMCP43XLM

CP45XLFCP43XLF

CP45ARJCP43ARJ

CP45DSZCP43DSZ

Wall Junction boxes.

WB45S WB45DSurface mount boxes

CF45S CF45DCover Frames

WB50Wall boxes

WB3102

The WB50 are wall boxes for mounting AUDAC wall control panels such as the DW5066, MWX65 and WP523.The /FG is the white plastic version that is meant for flush mounting in Gypsum walls. The /FS is the steel version that is meant for flush mounting in brick or concrete walls.

Surface mounting boxes are also available in white (WB50/W) and black (WB50/B).

The WB3102 are wall mounting boxes for the VC3xx2-series volume controllers. The surface mount version is available in white colour (/SW), while the flush mount version allows installation in brick or concrete walls (/FS).

The CF45 cover frames allow flush mount installation for any 45 x 45 mm standard sized product such as matrix control panels, volume controllers, connection plates, ...

They come including a metal subframe(s) and are available in single (CF45S) and double (CF45D) unit size. They are available in black (/B) and white (/W)

The WB45 wall boxes allow surface mount installation for any 45 x 45 mm standard sized product such as matrix control panels, volume controllers, connection plates, ...

They come including a metal subframe(s) and are available in single (WB45S) and double (WB45D) unit size. They are available in black (/B) and white (/W)

125

Suited for Dimensions(W x H x D)

Colors / Material

WB50/FG Drywall 144,5 x 83,5 x 47,5 mm White ABS

WB50/FS Brick or stone walls 133 x 72 x 47 mm Galvanised steel

WB50 Any Surface 133 x 72 x 47 mm Black (/B) or White (/W) ABS

Technical Highlights

LCR700Digital LCR meterThe LCR700 is a digital LCR measurement appliance, essential for sound and electronic engineers.

Measurements can be made for induction, capacitance and resistance and the dissipation factor (D) can be read-out on a second display. It can be set to auto-ranging or manual mode, and all measurements can be carried out on two different frequencies, 120Hz and 1kHz. This allows measurements of great accuracy on all kinds of specimen.

An RS232 optical interface is provided to allow communication with a computer, and the Auto-Power OFF function helps to conserve the lifespan of the battery.

Supplied with: RS232 PC connection cable, test leads, shock absorbing cover, software, instruction manual.

SLM700Sound level meterThe SLM700 is a stable, safe and reliable sound level meter, designed for all kinds of sound level measurements and compliant to all international standards for sound level meters.

It can be switched between two different weighting frequency filters (A and C type) and has a fast (peak value, 125 msec) and slow (average value, 1sec) operation mode.

Other functions like a hold button and a Minimum/Maximum mode are also present. The total measurement range is adjustable in four steps of 30dB ~ 80 dB, 50 dB ~ 100 dB, 60 dB ~ 110 dB and 80 dB ~ 130 dB, and can be set manually or by auto ranging. Two 3.5mm AC and DC output jacks, a calibration potentiometer and a 6V DC power connector are present.

Supplied with: Microphone windshield, carrying case, 4 x 1.5V (AA) Battery and instruction manual

CTA845Cable test adapterThe CTA845 cable test adapter features a 8-pin terminal block connector (3.5 mm pitch) on one side and a female RJ45 connector on the other side. Both connectors are parallel connected, allowing twisted pair peripheral expansion cabling being tested with standard RJ45 cable testers. This will avoid wrong wiring causing failure and damage to equipment.

126

SLC346Sound level calibratorFor releable measurements, the accuracy of the sound level meters should be regularly verified. The AUDAC SLC336 Sound Level Calibrator is the perfect companion for this job.

It is easy to operate, provides two different sound levels (94 dB and 114 dB) at a frequency of 1 kHz and can be used to for various sound measurement devices. For example, the testing of paging microphones, ...

It features a standard opening for 1” microphones. The SLC346 is supplied with: soft carrying bag, ½” microphone adapter, 9V battery

PSD SeriesPower suppliesThe PSD series offers a wide range of versatile switching power supply’s. They are mainly used as power supply for extension units, interface boxes or other expansion units of sound systems, but they can be used for all kinds of applications requiring 12V DC or 24V DC, at different current ratings.

There are two different construction forms available. Standard ABS housings suited for standard applications and industrial graded designed DIN rail mounting versions, to be used in all kinds of applications. Going from small and simple applications to industrial environments and hazardous locations.

RGA10Outdoor antennaThe RGA10 is an omnidirectional outdoor FM antenna, designed to be used in any installation. It provides the best reception of FM radio signals, where any kind of radio tuner is used.

The aluminium structure of the antenna ensures resistance against all weather conditions, and will last for years. There is a clip attached for mounting on poles with a diameter of 30 to 50 mm.

Connection is made with an included F-connector with waterproof boot.

127

Output Voltage Max Output Current Max Power Input signal Ripple & Noise Efficiency Construction Dimensions(W x H x D)

PSD124 12V DC 4A 48W 100-240V AC / 50-60Hz 100mV 83% DIN rail 32x125x100 mm

PSD241 24V DC 1,67A 40W 100-240V AC / 50-60Hz 100mV 85% ABS 50x33x100 mm

PSD242 24V DC 2.5A 60W 100-240V AC / 50-60Hz 100mV 84% ABS 60x38x120 mm

PSD243 24V DC 2A 48W 100-240V AC / 50-60Hz 120mV 85% DIN rail 32x125x100 mm

Technical Highlights

128

Damburg, Bocholt Belgium runs on AUDAC

Set SolutionsWith the extensive range of speakers and amplifiers it is possible to find a suitable solution for nearly every situation. Because it is often difficult to find an appropriate combination of matching speakers and amplifiers, we made a selection of the most popular ready-to-use sets that can be used for a wide variation of applications.

Some sets are meant to be used in applications where music is the key element, such as dance cafés, pubs and clubs while other sets are meant to be used in commercial as well as residential applications.

FESTA4004 x WX502 + SX408A

The FESTA400 combination is the ideal solution for smaller indoor applications where music is the key element, such as cafés, bars, pubs or restaurants.

Available as Festa400/B (black) or Festa400/W (white)

CONGRESS4002 x AXIR + SX408A

This elegant combination is recommended to use in meeting rooms, board rooms, small places of worship and to place next to flatscreens or projection screens.

Available as Congress400/B (black) or Congress400/W (white)

129

Bar Noir runs on Audac

FESTA500D2 x VEXO8 + SX12 + SMA500

The FESTA500D combination is recommended to be used in medium fixed indoor applications such as medium sized pubs, clubs and dance cafés. The dual coil subwoofer with passive crossover provides a simple but effective solution for low and high frequency filtering in a stereo application.

FESTA700D2 x VEXO8 + SX412 + SMQ350

The FESTA700D combination is recommended to be used in medium fixed indoor applications such as medium sized pubs, clubs and dance cafés. The quad channel amplifier with individual high frequency channels and brigded low frequency channel provides an optimal performance and protection for the equipment.

Set Solutions

+ SMA500 Dual channel 500 Watt power amplifier with DSP+ WaveDynamics™ speaker presets for optimal performance & protection+ 2 x VEXO8 175 Watt 8" Compact high-power loudspeakers+ SX12 200 Watt 12" dual coil tandem ported bass cabinet

+ SMQ350 Quad channel 350 Watt power amplifier with DSP (Configured as triple channel setup)+ WaveDynamics™ speaker presets for optimal performance & protection+ 2 x VEXO8 175 Watt 8" Compact high-power loudspeakers+ SX412 300 Watt 12" tandem ported bass cabinet

130

FORTE1100D4 x VEXO8 + SX415 + SMQ500

The FORTE1100D combination is recommended to be used in medium indoor applications where a high power is required, such as larger pubs, clubs and dance cafés.

+ SMQ500 Quad channel 500 Watt power amplifier with DSP (Configured as triple channel setup)+ WaveDynamics™ speaker presets for optimal performance & protection+ 4 x VEXO8 175 Watt 8" Compact high-power loudspeakers+ SX415 500 Watt 15" tandem ported bass cabinet

FORTE2000D4 x PX112 + SX418 + SMQ750

Our most powerful set solution, the FORTE 2000D, is recommended to be used in large indoor applications where a high power is required, such as event halls and large dance floors in clubs.

The warm bass, combined with clear high tones assure that quality music reaches a large audience the way it’s meant to be heard.

+ SMQ750 Quad channel 750 Watt power amplifier with DSP (Configured as triple channel setup)+ WaveDynamics™ speaker presets for optimal performance & protection+ 4 x PX112 300 Watt 12" loudspeakers+ SX418 700 Watt 18" tandem ported bass cabinet+ SX418 700 Watt 18" tandem ported bass cabinet

131

Square, Kermt Belgium runs on AUDAC

CIELO404 x CS55 + COM3

The CIELO 40 is a combination of ceiling speakers with a public address amplifier that is suitable to cover a surface up to 40m² with clear and intelligible music and speech.Available as Cielo40/B (black) or Cielo40/W (white).

Cielo solutions

The CIELO sets are combinations consisting of ceiling speakers with a matching 100V public address amplifier. They are primarily used in commercial and residential applications.

The set number indicates the amount of square meters which can be covered by clear and intelligible sound with an average height ceiling.

132

CIELO12010 x CS75 + COM24

The CIELO 120 is a combination of ceiling speakers with a public address amplifier that is suitable to cover a surface of up to 120m² with clear and intelligible music and speech.

Available as Cielo120/B (black) or Cielo120/W (white)

CIELO20020 x CS55 + COM12 + PDM200

The CIELO 200 is a combination of ceiling speakers with a public address amplifier and a paging microphone that is suitable to cover a surface of up to 200m² with clear and intelligible music and speech.

Available as Cielo200/B (black) or Cielo200/W (white)

133

AUDAC USB StickPROMO5031

This USB Stick contains everything you need in order to be in-formed on the subject of audac equipment such as productheets, catalog files, logos etc.Ideal for introducing new business partners or customers to the brand!

Audac ScrewdriverPROMO5032This compact screwdrivers features a flat-headed and a cross side, which can easily be switched..

8 GB Premium USB StickUMS08The UMS08 is a micro-sized usb-stick measuring only 12 x 23mm. Designed specifically for 19" appliances such as the CMP30, allowing you to store thousands of files.black brushed metal casing.

Promo Items

134

Audac BinderPROMO5040This binder includes a calculator and ballpoint pen and is large enough to fit the included noteblock as well as product catalogues and other documents you might want to carry. Has over 10 different pockets and fits businesscards, DVDs and memory cards.

Cycling OutfitsRide in StyleThe outfits will be produced by renowned belgian outfit producer Doltcini. AUDAC has created a unique design for their exclusive PRO series outfits.

Summer Outfit:Promo 5070: Small SizePromo 5071: Medium SizePromo 5072: Large SizePromo 5073: XL SizePromo 5074: XXL Size

Winter Outfit:Promo 5075: Small SizePromo 5076: Medium SizePromo 5077: Large SizePromo 5078: XL SizePromo 5079: XXL Size

135

Audac Matrix Systems ComparisonInputs & Outputs MTX48 MTX88 R2 M2

Number of outputs (Zones)

4 Balanced Stereo

8 Balanced Stereo

8 Unbalanced Stereo

8 Balanced Stereo

Output expansion capabilities

Fiber(optional) Fiber(optional)

Number of balanced Mic inputs

2 2 8 (Selectable)

Phantom power Yes (15V) Yes (15V) Yes (48V)

Number of stereo Line inputs

4 Unbalanced 4 Unbalanced 8 Unbalanced 8 Balanced

Number of priority inputs

2 (Mic) 2 (Mic) 4 (All Inputs) 4 (All Inputs)

System Features MTX48 MTX88 R2 M2

Input Mixing Yes

Input Limiter (ALC) Yes

Voice file interface Yes (SD Card)

Timer programmed events

Yes (256) Yes (256)

Zone linking Yes Yes

Mono / Stereo switching

Yes Yes Yes Yes

Digital audio filters Input Input & Output

Talkover Yes

DSP Power Medium High

Input EQ Band 3-Band (Mic) 3-Band (Mic) 7-Band

Adjustable Freq & Q

Yes

Output EQ Band 2-Band 2-Band 2-Band 7-Band & 2 Band

Adjustable Freq & Q

Yes

Automatic Level Control

Yes

Audio Delay Yes (up to 2000 ms)

Anti - Feedback Yes

Output scenes Yes (8 / Output)

Global scenes Yes (8)

Output linking Yes Yes

Output names assignment

Yes Yes Yes Yes

Test signal generator Yes Yes

136

Peripherals & Controls MTX48 MTX88 R2 M2

RS-232 control port Yes Yes Yes Yes

RS-485 peripheral ports

Yes (5) Yes (9) Yes (10) Yes (10)

Integrated webserver (TCP/IP)

Yes Yes Yes Yes

Dry contact inputs Yes (2) Yes (10)

Dry contacts output (internal relay)

Yes (NO & NC)

Front panel control Yes Yes Optional (R2DIS) Optional (M2DIS)

Peripheral Expansion ports

4 (One for each zone)

8 (one for each zone)

10 (free configurable)

10 (free configurable)

Paging console connectivity

Yes Yes Yes Yes

Internal expansion modules MTX48 MTX88 R2 M2

Touch screen optional Yes Yes

Fiber interconnection optional

Yes Yes

Internal power amplifier optional

Yes Yes

Compatible peripherals MTX48 MTX88 R2 M2

DW5066 Yes Yes

DW3020/4020 Yes Yes

MWX65 Yes Yes

MWX43/45 Yes Yes

APM1xx Yes Yes Yes Yes

MPXxx MPX48 MPX88

WLI Yes Yes

WMI Yes Yes

137

100 V SYSTEMS 51ALI20/25 119AMP20 30AMP523 31APC100 19APG20 53APM 17APM 113APT20 118ARJ03P 18ARU 18ASP20 76ATEO 4 84ATEO 6 85ATU44 119CP45ARJ/W 18AUDAC SYSTEM MANAGER 19AUDAC USB STICK 132AWP06 106AXIR 79AXIR/O 79CP43ARJ/W 18CELO 2 94CELO 5 95CELO 6 95CELO 8 95CF45/S CF45/D 125CHA215 73CHA230 73CHA SERIES 73CIELO 40 130CIELO 120 131CIELO 200 131CLS420 82CLS440 82CMP30 29CMP401 118CMT500 117CMT510 KIT 117CMX45/55 113CMX200 112CMX210 112CMX230 113CMX380 117CMX700 114CMX705 115CMX720 114CMX725 115COLUMN SPEAKERS 77COM3/6 45COM12/24 46COM SERIES 44CONGRESS 400 129CP43ARJ/B 18CP43ARP/B 18CP43ARP/W 18CP45ARJ/B 18CP45ARP/B 18CP45ARP/W 18CPA SERIES 48CPB SERIES 62CPR12 47CS2.1 98CS3.1 99

CS3.2 99CS55-CS55D 102CS74 101CS75-CS75D 100CS85-CS85D 100CS424 105CS660 105CS1000S 109CSA506 104CSE55-CSW55 103CSE100 102CSF506MKII 104CS SERIES 98CS SERIES 100CTA 845 126CYCLING OUTFITS 133DPA73/153 37DPA74/154 38DPA152/252 36DPA616 39DW3020/4020 7DW5066 7FBS125 CABLE 12FESTA400 129FESTA500D 130FESTA700D 130FORTE1100D 131FORTE2000D 131GIAX 80HM150 118HS121 72HS208MK2/HS208TMK2 70HS212MK2/HS212TMK2 71KYDO 78LCR700 126LIM012 54LX503MKII 92LX523 90M2 6M66/67 116M86/87 116MBK208Z /MBK212Z 71MBK408MKII 66MBK SERIES 62MERO 2 97MERO 5 97MERO 6 97MTX48 22MTX88 23MVF16 55PC3000/4000 123PDM200 116PMX124 28POW2 6PRE16 26PRE26 27 PROMO5032 132PROMO5040 133PX108 MK2 58PX110 MK2 58PX112 MK2 59PX115 MK2 59R2 6

RGA10 127RM523 91RX112 MK2 60RX115 MK2 61RX SERIES 60SLC346 127SLM700 126SMA SERIES 34SMQ SERIES 35SP20 74SP20HA 74SP22 75SP202 75SSP500 106SX12 67SX408 66SX408A 64SX412 67SX415 68SX418 68TR1000 SERIES 121TR2000 SERIES 121TR2080 SERIES 121TR3000 SERIES 120TRU4 SERIES 40TRU812 41UMS08 132VC3XX2 123VC2200 122VC3036/4036 123VC3208 65VC3208/VC4008 122VEXO 8 57WB5065 125WLI18/22 52WMI18/22 52WP523 90WS524-WS524/D 108WS624-WS624/D 108WTR06/24 121WX302 86WX302/OB OR /OW 89WX502 86WX502/OB OR /OW 89WX802 87WX802/OB OR /OW 89

Index

138

139

Notes

140

Notes