audi authorized collision repair...

1

Audi Authorized Collision Repair Self-Assessment

While becoming a certified Audi Collision Repair Facility is a substantial investment, many of the requisite tools, equipment

and other requirements are shared among other brands. This checklist can help you maximize your investment. Use it to assess

which Audi requirements you may already meet, and those you have yet to complete.

Audi requirement also satisfies these brands where noted.

Check here if you meet this Audi requirement

Requirement Audi VW Porsche Bentley JaguarNissan/Infiniti1

Must have one of these four approved welders:

• VAS 6545 Wielander + Schill Resistance Inverter Spot Welder

• VAS 6535 Elektron Resistance Inverter Spot Welder

• VAS 6530 Tecna Resistance Inverter Welder

• VAS 6755 Car-O-Liner CTR12000 Welder

• VAG 1731 Vario Weld Breaker (or equivalent)

• VAG 1731/2 Replacement Breaker for High-Strength Steel (or equivalent)

• VAG 1523B Pneumatic Sabre Saw, or VAS 6780

2





• RAE 512001 Body Separation Chisel with Handle (or equivalent)

• VAG 2005B Pneumatic Adhesive Gun (for the 50 mL cartridge of DP490)

• OPTIONAL VAS 6453 Pneumatic Adhesive Gun (for the 400 mL cartridge of DP490)

• OPTIONAL VAS 5237 Double Cartridge Gun (or equivalent)

• SC.40014 Celette 4-Ton Super Hydraulic Kit

• VAG 1438 Celette Mechanical Door Brace (Celette ATS.1802)

• 918.920 Celette Orientable Engine Holding Device

• ESP.MP.02 Celette Work Stand

• ROLL.100 Celette Trolley

3





Must have one of these three approved Bench Alignment Systems:

• SVN.05.3112 Celette Sevenne Composition (includes Griffon or Griffon XL)

• VAS 6527 Car-O-Liner–Professional Measuring and Alignment System

• VAS 6528 Celette Car-O-Liner–Professional Plus Measuring and Alignment System

• 955.9602 Celette Set of (6) Universal Crossmembers

• MZ450.400 Celette Set of (22) MZ Towers and (4) Wedges

• MZ450.905 Celette MZ Towers Storage Trolley

• MZ2500.000 Celette MZ+ Set

• 9113.063 Celette Side Portal Gantry

• 9121.523 Celette Multi-Function Support

4





• ATD.149 Celette Pulling Flange

• ATD.01.149 Celette Kit for Flange ATD.149

• SN99.00 Celette Pulling Straps, Set of 2

• ATD.165 Celette Pulling Accessory

• ATD.01.801 Celette Pulley Block

• CSK15.111 Celette Kit for Multiple Pulling

• CAT500 Celette Pulling Set

• VAS 6526/1 Car-O-Liner EVO1 Basic Anchor System

• VAS 6526/1-1 Car-O-Liner EVO1 Basic Anchor System, Tool Trolley

• VAS 6526/2 Car-O-Liner EVO2 Extended Anchor System

5





• VAS 6526/3 Car-O-Liner EVO3 Universal Anchor System

• VAS 6526/4 Car-O-Liner Hydraulic Jack Kit

• VAS 6526/5 Car-O-Liner Anchor Set

Must have one of these four approved tool organization systems:

• VAS 6526/6 Car-O-Liner Tool Trolley, Basic

• VAS 6526/7 Car-O-Liner Tool Trolley, Basic Plus

• VAS 6526/8 Car-O-Liner Tools Panel

• VAS 6526/9 Car-O-Liner Wall System

• VAS 6526/10 Car-O-Liner Clamp Set, Special

• VAS 6526/11 Car-O-Liner Measuring Unit, Vision X3

6




• VAS 6526/12 Car-O-Liner Measuring Unit, Vision EVO

• VAS 6526/13 Car-O-Liner Software Upgrade

• VAS 6526/14 Car-O-Liner Basic Bench, 4.20m Quick 42 Other options: Bench Rack 4200, 5000, 5500 or 6300

• VAS 6526/14-1 Car-O-Liner Ramp Set

• VAS 6526/15 Car-O-Liner 10-Ton Alignment Unit

• VAS 6526/16 Car-O-Liner Quick Anchoring Set

• VAS 6526/17 Car-O-Liner Clamp Set

• VAS 6526/20 Car-O-Liner Pull Clamp Set

• VAS 6526/19 Car-O-Liner Pull Bar Set


7




• VAS 6526/20 Car-O-Liner Pull Clamp Set

• VAS 6526/21 Car-O-Liner Winch

Downdraft paint booth requirements:

• Lighting: Minimum of 100 ft candles at center of booth, and upper and corner color corrected fluorescent lamps

• Air handling/heating: Capable of 125 ft/min; up to 19,000 CFM; and min 1.5 MBTU

Training requirements:

• I-CAR classes: WKR01 CPS01 MEA01 SSS01 WCS04 SPS01 SPS02 GLA02 WCS03 or SPS05 AHS01 FOM01 SPS07 STA01

(except STA01)

• OEM Academy courses

• I-CAR Refinish Technician courses: WKR01 CPS01 REF03

OR

• Approved paint supplier training course that covers color theory and blending techniques


8




One of the optional pieces below may be required in the future:

• VAG 1959A Welding Unit (or equivalent)

• VAS 6388A Welding and Brazing System (or equivalent)

• VAS 6741 Welding and Brazing System (or equivalent)


Audi of America, Inc. believes the information in this document to be correct as of November 2013. However, all information is subject to change. Please contact your Audi of America representative with questions.1 Nissan and Infiniti do not require specific tool manufacturers or tool models.©2013 Audi of America, Inc. “Audi” and the four rings logo are registered trademarks of AUDI AG. All other trademarks are the property of their respective owners. Rev 11/13

audi authorized collision repair...

Documents