aula 3 - crystalline solids
TRANSCRIPT
The Structure of Crystalline Solids
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Types of solids❖ Crystalline material: atoms self-
organize in a periodic array!
❖ Single crystal: atoms are in a periodic array over the entire extend of the material!
❖ Polycrystalline material: composed of small crystals or grains!
❖ Amorphous: disordered, lack of a systematic arrangement
�2
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Crystal Structures
❖ Consider atoms to be hard-spheres with well defined radii. The shortest distance between two like atoms is one diameter of the hard sphere
The way in which atoms or molecules are arranged
2R
Crystalline Lattice: A tridimensional matrix
representing the position of the atoms
�3
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Energy and Packing
�4
•Non dense, random packing
Chapter 3 - 2
• Non dense, random packing
• Dense, ordered packing
Dense, ordered packed structures tend to have lower energies.
Energy and Packing Energy
r
typical neighbor bond length
typical neighbor bond energy
Energy
r
typical neighbor bond length
typical neighbor bond energy
Chapter 3 - 2
• Non dense, random packing
• Dense, ordered packing
Dense, ordered packed structures tend to have lower energies.
Energy and Packing Energy
r
typical neighbor bond length
typical neighbor bond energy
Energy
r
typical neighbor bond length
typical neighbor bond energy
•Dense, ordered packing
Chapter 3 - 2
• Non dense, random packing
• Dense, ordered packing
Dense, ordered packed structures tend to have lower energies.
Energy and Packing Energy
r
typical neighbor bond length
typical neighbor bond energy
Energy
r
typical neighbor bond length
typical neighbor bond energy
Chapter 3 - 2
• Non dense, random packing
• Dense, ordered packing
Dense, ordered packed structures tend to have lower energies.
Energy and Packing Energy
r
typical neighbor bond length
typical neighbor bond energy
Energy
r
typical neighbor bond length
typical neighbor bond energy
Dense, ordered packed structures, tend to have lover energies
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Unit Cells
❖ The choice of origin of the repeating unit can vary!
❖ Most are represented by parallelepipeds or prisms
The smallest repeating unit which shows the full symmetry of the crystal structure
2-Dimensional
Na+ Cl+ Na+ Cl+
Na+Cl+ Na+Cl+
Na+ Cl+ Na+ Cl+
3-Dimensional
�5
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Metallic Crystal Structures
�6
How can we stack atoms to minimize empty space?
Chapter 3 - 4
Metallic Crystal Structures • How can we stack metal atoms to minimize
empty space? 2-dimensions
vs.
Now stack these 2-D layers to make 3-D structures
2 - dimensions
Stack these 2-D layers to make 3-D structures
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Metallic Crystal Structures❖ Metals are usually polycrystalline!
❖ Compact arrangements!
❖ Using the hard sphere model, each sphere represents a ionic nucleus!
❖ Atomic (hard sphere) radius, R, defined by ion core radius - typically 0.1 - 0.2 nm
�7
fcc
hcp
bcc
face-center cubic
hexagonal close-packed
body-center cubic
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Simple Cubic Structure (SC)
�8
Only Po has this estructure
•Rare due to low packing density!•Close-packed directions are cubic edges
Chapter 3 - 6
• Rare due to low packing density (only Po has this structure) • Close-packed directions are cube edges.
• Coordination # = 6 (# nearest neighbors)
Simple Cubic Structure (SC)
Click once on image to start animation
(Courtesy P.M. Anderson)
Chapter 3 - 6
• Rare due to low packing density (only Po has this structure) • Close-packed directions are cube edges.
• Coordination # = 6 (# nearest neighbors)
Simple Cubic Structure (SC)
Click once on image to start animation
(Courtesy P.M. Anderson)
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Atomic Packing Factor (APF)
�9
APF = Sum of atomic volumes!Volume of cell
•APF for a simple cubic structure = 0,52
Chapter 3 - 7
• APF for a simple cubic structure = 0.52
APF = a 3
4 3 π (0.5a) 3 1
atoms unit cell
atom volume
unit cell volume
Atomic Packing Factor (APF)
APF = Volume of atoms in unit cell*
Volume of unit cell
*assume hard spheres
Adapted from Fig. 3.3 (a), Callister & Rethwisch 9e.
close-packed directions
a
R = 0.5a
contains 8 x 1/8 = 1 atom/unit cell
Chapter 3 - 7
• APF for a simple cubic structure = 0.52
APF = a 3
4 3 π (0.5a) 3 1
atoms unit cell
atom volume
unit cell volume
Atomic Packing Factor (APF)
APF = Volume of atoms in unit cell*
Volume of unit cell
*assume hard spheres
Adapted from Fig. 3.3 (a), Callister & Rethwisch 9e.
close-packed directions
a
R = 0.5a
contains 8 x 1/8 = 1 atom/unit cell
• APF: fraction of volume occupied by hard spheres
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Body-Centered Cubic (bcc) Crystal Structures
❖ Cubic geometry!❖ Examples: Cr, Fe, W
• Atoms are located at each of the corners and on one another at the center of the cube
�10
a
•a: cube edge length!•R: atomic radius
cubic edge length!a = 4R /√3
Two atoms are associated with each BCC unit cell: the equivalent of one atomfrom the eight corners, each of which is shared among eight unit cells, and the sin-gle center atom, which is wholly contained within its cell. In addition, corner andcenter atom positions are equivalent. The coordination number for the BCC crys-tal structure is 8; each center atom has as nearest neighbors its eight corner atoms.Because the coordination number is less for BCC than FCC, so also is the atomicpacking factor for BCC lower—0.68 versus 0.74.
The Hexagonal Close-Packed Crystal StructureNot all metals have unit cells with cubic symmetry; the final common metallic crystalstructure to be discussed has a unit cell that is hexagonal. Figure 3.3a shows a reduced-sphere unit cell for this structure, which is termed hexagonal close-packed (HCP); an
3.4 Metallic Crystal Structures • 49
(a) (b) (c)
Figure 3.2 For the body-centered cubic crystal structure, (a) a hard-sphere unit cellrepresentation, (b) a reduced-sphere unit cell, and (c) an aggregate of many atoms. [Figure(c) from W. G. Moffatt, G. W. Pearsall, and J. Wulff, The Structure and Properties ofMaterials, Vol. I, Structure, p. 51. Copyright © 1964 by John Wiley & Sons, New York.Reprinted by permission of John Wiley & Sons, Inc.]
hexagonal close-packed (HCP)
c
aA
BC
J
E
G
H
F
D
(b)(a)
Figure 3.3 For the hexagonal close-packed crystal structure, (a) a reduced-sphere unitcell (a and c represent the short and long edge lengths, respectively), and (b) an aggregateof many atoms. [Figure (b) from W. G. Moffatt, G. W. Pearsall, and J. Wulff, The Structureand Properties of Materials, Vol. I, Structure, p. 51. Copyright © 1964 by John Wiley & Sons,New York. Reprinted by permission of John Wiley & Sons, Inc.]
Crystal Systems andUnit Cells for Metals
VMSE
JWCL187_ch03_044-089.qxd 11/9/09 9:31 AM Page 49
Two atoms are associated with each BCC unit cell: the equivalent of one atomfrom the eight corners, each of which is shared among eight unit cells, and the sin-gle center atom, which is wholly contained within its cell. In addition, corner andcenter atom positions are equivalent. The coordination number for the BCC crys-tal structure is 8; each center atom has as nearest neighbors its eight corner atoms.Because the coordination number is less for BCC than FCC, so also is the atomicpacking factor for BCC lower—0.68 versus 0.74.
The Hexagonal Close-Packed Crystal StructureNot all metals have unit cells with cubic symmetry; the final common metallic crystalstructure to be discussed has a unit cell that is hexagonal. Figure 3.3a shows a reduced-sphere unit cell for this structure, which is termed hexagonal close-packed (HCP); an
3.4 Metallic Crystal Structures • 49
(a) (b) (c)
Figure 3.2 For the body-centered cubic crystal structure, (a) a hard-sphere unit cellrepresentation, (b) a reduced-sphere unit cell, and (c) an aggregate of many atoms. [Figure(c) from W. G. Moffatt, G. W. Pearsall, and J. Wulff, The Structure and Properties ofMaterials, Vol. I, Structure, p. 51. Copyright © 1964 by John Wiley & Sons, New York.Reprinted by permission of John Wiley & Sons, Inc.]
hexagonal close-packed (HCP)
c
aA
BC
J
E
G
H
F
D
(b)(a)
Figure 3.3 For the hexagonal close-packed crystal structure, (a) a reduced-sphere unitcell (a and c represent the short and long edge lengths, respectively), and (b) an aggregateof many atoms. [Figure (b) from W. G. Moffatt, G. W. Pearsall, and J. Wulff, The Structureand Properties of Materials, Vol. I, Structure, p. 51. Copyright © 1964 by John Wiley & Sons,New York. Reprinted by permission of John Wiley & Sons, Inc.]
Crystal Systems andUnit Cells for Metals
VMSE
JWCL187_ch03_044-089.qxd 11/9/09 9:31 AM Page 49
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Body-Centered Cubic (bcc) Crystal Structures
❖ Cubic geometry!❖ Examples: Cr, Fe, W
�11
11MSE 2090: Introduction to Materials Science Chapter 3, Structure of solids
Body-Centered Cubic (BCC) Crystal Structure (I)
Atom at each corner and at center of cubic unit cellCr, D-Fe, Mo have this crystal structure
R
Atoms /Unit cell = 2
Coordination Number: 8
a
Aula 3 - Crystalline Solids - 31 de marzo de 2014
BCC - APF
�12Chapter 3 - 10
Atomic Packing Factor: BCC
APF =
4 3 π ( 3 a/4 ) 3 2
atoms unit cell atom
volume
a 3 unit cell volume
length = 4R = Close-packed directions:
3 a
• APF for a body-centered cubic structure = 0.68
a R Adapted from Fig. 3.2(a), Callister & Rethwisch 9e.
a
a 2
a 3 APF = 0,68
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Face-Centered Cubic (fcc) Crystal Structures
�13
•All atoms in the unit cell are equivalent!
•FCC can be represented by a stack of close-packed planes (planes with highest density of atoms)
7MSE 2090: Introduction to Materials Science Chapter 3, Structure of solids
Face-Centered Cubic (FCC) Crystal Structure (I)
¾ Atoms are located at each of the corners and on the centers of all the faces of cubic unit cell
¾ Cu, Al, Ag, Au have this crystal structure
Two representations of the FCC unit cell R
a
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Face-Centered Cubic (fcc) Crystal Structures
❖ Cubic geometry!❖ Examples: Cu, Al, Ag, Au
• Atoms are located at each of the corners and on the of all the faces of cubic unit cell
�14
a
•a: cube edge length!•R: atomic radius
cubic edge length!a = 2R√2
46 • Chapter 3 / The Structure of Crystalline Solids46 • Chapter 3 / The Structure of Crystalline Solids
(a) (b)
(c)
Figure 3.1 For the face-centered cubic crystalstructure, (a) a hard-sphere unit cellrepresentation, (b) areduced-sphere unit cell, and(c) an aggregate of manyatoms. [Figure (c) adaptedfrom W. G. Moffatt, G. W.Pearsall, and J. Wulff, TheStructure and Properties ofMaterials, Vol. I, Structure, p.51. Copyright © 1964 byJohn Wiley & Sons, NewYork. Reprinted bypermission of John Wiley &Sons, Inc.]
Cr yst a l St ructures3.2 FUNDAMENTAL CONCEPTS
Solid materials may be classified according to the regularity with which atoms or ionsare arranged with respect to one another. A crystalline material is one in which theatoms are situated in a repeating or periodic array over large atomic distances; thatis, long-range order exists, such that upon solidification, the atoms will position them-selves in a repetitive three-dimensional pattern, in which each atom is bonded to itsnearest-neighbor atoms. All metals, many ceramic materials, and certain polymersform crystalline structures under normal solidification conditions. For those that donot crystallize, this long-range atomic order is absent; these noncrystalline or amor-phous materials are discussed briefly at the end of this chapter.
Some of the properties of crystalline solids depend on the crystal structure ofthe material, the manner in which atoms, ions, or molecules are spatially arranged.There is an extremely large number of different crystal structures all having long-rangeatomic order; these vary from relatively simple structures for metals to exceedinglycomplex ones, as displayed by some of the ceramic and polymeric materials. The pres-ent discussion deals with several common metallic crystal structures. Chapters 12 and14 are devoted to crystal structures for ceramics and polymers, respectively.
When describing crystalline structures, atoms (or ions) are thought of as beingsolid spheres having well-defined diameters. This is termed the atomic hard-sphere
crystalline
crystal structure
JWCL187_ch03_044-089.qxd 11/9/09 9:31 AM Page 46
46 • Chapter 3 / The Structure of Crystalline Solids46 • Chapter 3 / The Structure of Crystalline Solids
(a) (b)
(c)
Figure 3.1 For the face-centered cubic crystalstructure, (a) a hard-sphere unit cellrepresentation, (b) areduced-sphere unit cell, and(c) an aggregate of manyatoms. [Figure (c) adaptedfrom W. G. Moffatt, G. W.Pearsall, and J. Wulff, TheStructure and Properties ofMaterials, Vol. I, Structure, p.51. Copyright © 1964 byJohn Wiley & Sons, NewYork. Reprinted bypermission of John Wiley &Sons, Inc.]
Cr yst a l St ructures3.2 FUNDAMENTAL CONCEPTS
Solid materials may be classified according to the regularity with which atoms or ionsare arranged with respect to one another. A crystalline material is one in which theatoms are situated in a repeating or periodic array over large atomic distances; thatis, long-range order exists, such that upon solidification, the atoms will position them-selves in a repetitive three-dimensional pattern, in which each atom is bonded to itsnearest-neighbor atoms. All metals, many ceramic materials, and certain polymersform crystalline structures under normal solidification conditions. For those that donot crystallize, this long-range atomic order is absent; these noncrystalline or amor-phous materials are discussed briefly at the end of this chapter.
Some of the properties of crystalline solids depend on the crystal structure ofthe material, the manner in which atoms, ions, or molecules are spatially arranged.There is an extremely large number of different crystal structures all having long-rangeatomic order; these vary from relatively simple structures for metals to exceedinglycomplex ones, as displayed by some of the ceramic and polymeric materials. The pres-ent discussion deals with several common metallic crystal structures. Chapters 12 and14 are devoted to crystal structures for ceramics and polymers, respectively.
When describing crystalline structures, atoms (or ions) are thought of as beingsolid spheres having well-defined diameters. This is termed the atomic hard-sphere
crystalline
crystal structure
JWCL187_ch03_044-089.qxd 11/9/09 9:31 AM Page 46
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Face-Centered Cubic (fcc) Crystal Structures
❖ Cubic geometry!❖ Examples: Cu, Al, Ag, Au, Pb,
Ni, Pt
�15
CN: 12
• Coordination number (CN): the number of closest neighbors to which
an atom is bonded
Atoms /Unit cell = 4
46 • Chapter 3 / The Structure of Crystalline Solids46 • Chapter 3 / The Structure of Crystalline Solids
(a) (b)
(c)
Figure 3.1 For the face-centered cubic crystalstructure, (a) a hard-sphere unit cellrepresentation, (b) areduced-sphere unit cell, and(c) an aggregate of manyatoms. [Figure (c) adaptedfrom W. G. Moffatt, G. W.Pearsall, and J. Wulff, TheStructure and Properties ofMaterials, Vol. I, Structure, p.51. Copyright © 1964 byJohn Wiley & Sons, NewYork. Reprinted bypermission of John Wiley &Sons, Inc.]
Cr yst a l St ructures3.2 FUNDAMENTAL CONCEPTS
Solid materials may be classified according to the regularity with which atoms or ionsare arranged with respect to one another. A crystalline material is one in which theatoms are situated in a repeating or periodic array over large atomic distances; thatis, long-range order exists, such that upon solidification, the atoms will position them-selves in a repetitive three-dimensional pattern, in which each atom is bonded to itsnearest-neighbor atoms. All metals, many ceramic materials, and certain polymersform crystalline structures under normal solidification conditions. For those that donot crystallize, this long-range atomic order is absent; these noncrystalline or amor-phous materials are discussed briefly at the end of this chapter.
Some of the properties of crystalline solids depend on the crystal structure ofthe material, the manner in which atoms, ions, or molecules are spatially arranged.There is an extremely large number of different crystal structures all having long-rangeatomic order; these vary from relatively simple structures for metals to exceedinglycomplex ones, as displayed by some of the ceramic and polymeric materials. The pres-ent discussion deals with several common metallic crystal structures. Chapters 12 and14 are devoted to crystal structures for ceramics and polymers, respectively.
When describing crystalline structures, atoms (or ions) are thought of as beingsolid spheres having well-defined diameters. This is termed the atomic hard-sphere
crystalline
crystal structure
JWCL187_ch03_044-089.qxd 11/9/09 9:31 AM Page 46
a
Aula 3 - Crystalline Solids - 31 de marzo de 2014
FCC - APF
�16Chapter 3 - 12
• APF for a face-centered cubic structure = 0.74 Atomic Packing Factor: FCC
maximum achievable APF
APF =
4 3 π ( 2 a/4 ) 3 4
atoms unit cell atom
volume
a 3 unit cell volume
Close-packed directions: length = 4R = 2 a
Unit cell contains: 6 x 1/2 + 8 x 1/8 = 4 atoms/unit cell a
2 a
Adapted from Fig. 3.1(a), Callister & Rethwisch 9e.
APF= 0,74
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Closed-Packed Structures
�17
A A A A A A
A A A A A A
A A A A A A
A
A A A A A
B B B B B B
B B B B B B
B B B B B B
B
B B B B B
C C C C C C
C C C C C C
C C C C C C
C
C C C C C
fcc: ABCABC... stacking sequence
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Closed-Packed Structures
�18
A A A A A A
A A A A A A
A A A A A A
A
A A A A A
B B B B B B
B B B B B B
B B B B B B
B
B B B B B
A A A A A A
A A A A A A
A A A A A A
A
A A A A A
stacking sequence ABAB… structure hcp
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Hexagonal Closed-Packed (hcp) Crystal Structures
❖ Hexagonal geometry!❖ Composed with various hc
unit cells!❖ Examples: Cd, Mg, Zn, Ti
•Six atoms form regular hexagon, surrounding one atom in center. !!
•Another plane is situated halfway up unit cell (c-axis), with 3 additional atoms situated at interstices of hexagonal (close-packed) planes
�19
13MSE 2090: Introduction to Materials Science Chapter 3, Structure of solids
Hexagonal Close-Packed Crystal Structure (I)
¾ HCP is one more common structure of metallic crystals
¾ Six atoms form regular hexagon, surrounding one atom in center. Another plane is situated halfway up unit cell (c-axis), with 3 additional atoms situated at interstices of hexagonal (close-packed) planes
¾ Cd, Mg, Zn, Ti have this crystal structure
a
c
•Two cell lattice parameters: a and c
Two atoms are associated with each BCC unit cell: the equivalent of one atomfrom the eight corners, each of which is shared among eight unit cells, and the sin-gle center atom, which is wholly contained within its cell. In addition, corner andcenter atom positions are equivalent. The coordination number for the BCC crys-tal structure is 8; each center atom has as nearest neighbors its eight corner atoms.Because the coordination number is less for BCC than FCC, so also is the atomicpacking factor for BCC lower—0.68 versus 0.74.
The Hexagonal Close-Packed Crystal StructureNot all metals have unit cells with cubic symmetry; the final common metallic crystalstructure to be discussed has a unit cell that is hexagonal. Figure 3.3a shows a reduced-sphere unit cell for this structure, which is termed hexagonal close-packed (HCP); an
3.4 Metallic Crystal Structures • 49
(a) (b) (c)
Figure 3.2 For the body-centered cubic crystal structure, (a) a hard-sphere unit cellrepresentation, (b) a reduced-sphere unit cell, and (c) an aggregate of many atoms. [Figure(c) from W. G. Moffatt, G. W. Pearsall, and J. Wulff, The Structure and Properties ofMaterials, Vol. I, Structure, p. 51. Copyright © 1964 by John Wiley & Sons, New York.Reprinted by permission of John Wiley & Sons, Inc.]
hexagonal close-packed (HCP)
c
aA
BC
J
E
G
H
F
D
(b)(a)
Figure 3.3 For the hexagonal close-packed crystal structure, (a) a reduced-sphere unitcell (a and c represent the short and long edge lengths, respectively), and (b) an aggregateof many atoms. [Figure (b) from W. G. Moffatt, G. W. Pearsall, and J. Wulff, The Structureand Properties of Materials, Vol. I, Structure, p. 51. Copyright © 1964 by John Wiley & Sons,New York. Reprinted by permission of John Wiley & Sons, Inc.]
Crystal Systems andUnit Cells for Metals
VMSE
JWCL187_ch03_044-089.qxd 11/9/09 9:31 AM Page 49
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Hexagonal Closed-Packed (hcp) Crystal Structures
❖ Cubic geometry!❖ Examples: Cr, Fe, W
�20
Atoms /Unit cell = 6
Coordination Number: 12
APF: 0,74
13MSE 2090: Introduction to Materials Science Chapter 3, Structure of solids
Hexagonal Close-Packed Crystal Structure (I)
¾ HCP is one more common structure of metallic crystals
¾ Six atoms form regular hexagon, surrounding one atom in center. Another plane is situated halfway up unit cell (c-axis), with 3 additional atoms situated at interstices of hexagonal (close-packed) planes
¾ Cd, Mg, Zn, Ti have this crystal structure
13MSE 2090: Introduction to Materials Science Chapter 3, Structure of solids
Hexagonal Close-Packed Crystal Structure (I)
¾ HCP is one more common structure of metallic crystals
¾ Six atoms form regular hexagon, surrounding one atom in center. Another plane is situated halfway up unit cell (c-axis), with 3 additional atoms situated at interstices of hexagonal (close-packed) planes
¾ Cd, Mg, Zn, Ti have this crystal structure
a
c
Ideal c/a = 1,633
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Theoretical Density
�21
ρ = nA ! VCNAWhere:
n ! = !! number of atoms in each number cell!A != ! ! atomic weight!VC!= ! ! volume of the unit cell (a3 for cubic)!NA!= ! ! Avogadro’s number (6,022 x 1023 atoms/mol)
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Theoretical Density, ρ
�22Chapter 3 - 17
• Ex: Cr (BCC) A = 52.00 g/mol R = 0.125 nm n = 2 atoms/unit cell
ρtheoretical
a = 4R/ 3 = 0.2887 nm
ρactual
a R
ρ = a 3
52.00 2 atoms
unit cell mol g
unit cell volume atoms
mol
6.022 x 1023
Theoretical Density, ρ
= 7.18 g/cm3
= 7.19 g/cm3
Adapted from Fig. 3.2(a), Callister & Rethwisch 9e.
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Densities of Different Materials
�23Chapter 3 - 18
Densities of Material Classes ρ metals > ρ ceramics > ρ polymers
Why?
Data from Table B.1, Callister & Rethwisch, 9e.
ρ (g
/cm
)
3
Graphite/ Ceramics/ Semicond
Metals/ Alloys
Composites/ fibers Polymers
1
2
2 0 30
B ased on data in Table B1, Callister *GFRE, CFRE, & AFRE are Glass,
Carbon, & Aramid Fiber-Reinforced Epoxy composites (values based on 60% volume fraction of aligned fibers
in an epoxy matrix). 10
3 4 5
0.3 0.4 0.5
Magnesium Aluminum
Steels
Titanium
Cu,Ni Tin, Zinc Silver, Mo Tantalum Gold, W Platinum
G raphite Silicon Glass - soda Concrete Si nitride Diamond Al oxide Zirconia
H DPE, PS PP, LDPE PC
PTFE
PET PVC Silicone
Wood
AFRE * CFRE * GFRE* Glass fibers Carbon fibers A ramid fibers
Metals have... • close-packing (metallic bonding) • often large atomic masses Ceramics have... • less dense packing • often lighter elements Polymers have... • low packing density (often amorphous) • lighter elements (C,H,O) Composites have... • intermediate values
In general
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Single Crystals❖ Atoms are in a repeating or periodic array over the
entire extent of the material
�24
•All unit cells present the same orientation and are linked in the same way to each other!
•Natural or artificially grown!
•Has a geometric regular shape
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Polycrystalline material❖ Comprised of many small crystals or grains. !
❖ Grain sizes between 1nm - 2 cm!
❖ The grains have different crystallographic orientation. !
❖ Overall component properties are not directional!
❖ There exist atomic mismatch within the regions where grains meet. These regions are called grain boundaries.
�25
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Materials Solidification
�26
20MSE 2090: Introduction to Materials Science Chapter 3, Structure of solids
Single Crystals and Polycrystalline Materials
Single crystal: atoms are in a repeating or periodic array over the entire extent of the material
Polycrystalline material: comprised of many small crystals or grains. The grains have different crystallographic orientation. There exist atomic mismatch within the regions where grains meet. These regions are called grain boundaries.
Grain Boundary
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Single Crystals vs Polycrystals
�27
Single Crystals•Properties vary with direction: anisotropic!
•Example: the modulus of elasticity in BCC iron
Chapter 3 - 21
• Single Crystals -Properties vary with direction: anisotropic. -Example: the modulus of elasticity (E) in BCC iron:
Data from Table 3.4, Callister & Rethwisch 9e. (Source of data is R.W. Hertzberg, Deformation and Fracture Mechanics of Engineering Materials, 3rd ed., John Wiley and Sons, 1989.)
• Polycrystals -Properties may/may not vary with direction. -If grains are randomly oriented: isotropic. (Epoly iron = 210 GPa) -If grains are textured, anisotropic.
200 µm Adapted from Fig. 4.15(b), Callister & Rethwisch 9e. [Fig. 4.15(b) is courtesy of L.C. Smith and C. Brady, the National Bureau of Standards, Washington, DC (now the National Institute of Standards and Technology, Gaithersburg, MD).]
Single vs Polycrystals E (diagonal) = 273 GPa
E (edge) = 125 GPa Polycrystals
•Properties may/may not vary with direction!
•If grains are randomly oriented: isotropic!
•If grains are textured: anisotropic
Chapter 3 - 21
• Single Crystals -Properties vary with direction: anisotropic. -Example: the modulus of elasticity (E) in BCC iron:
Data from Table 3.4, Callister & Rethwisch 9e. (Source of data is R.W. Hertzberg, Deformation and Fracture Mechanics of Engineering Materials, 3rd ed., John Wiley and Sons, 1989.)
• Polycrystals -Properties may/may not vary with direction. -If grains are randomly oriented: isotropic. (Epoly iron = 210 GPa) -If grains are textured, anisotropic.
200 µm Adapted from Fig. 4.15(b), Callister & Rethwisch 9e. [Fig. 4.15(b) is courtesy of L.C. Smith and C. Brady, the National Bureau of Standards, Washington, DC (now the National Institute of Standards and Technology, Gaithersburg, MD).]
Single vs Polycrystals E (diagonal) = 273 GPa
E (edge) = 125 GPa
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Polymorphism
❖ Can be found in any crystalline materials, including metals, minerals, polymers!
❖ Relevant to the fields of pharmaceuticals, agrochemicals, pigments, dyestuffs, foods, and explosives
�28
• Polymorphism: When a material exist in more than one crystal structure
quartz
cristobalite
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Allotropy
�29
•Allotropy: Polymorphisme in an elemental solid
In Carbon
Diamond Graphite Fullerenes Carbon Black
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Crystal Systems
�30
•Unit cell: smallest repetitive volume which contains the complete lattice pattern of a crystal
Crystals Systems•Classification of crystal structures based on the geometry of the
unit cell, independent of the atomic positions in the cell
Substitution for the various parameters into Equation 3.5 yields
The literature value for the density of copper is 8.94 g/cm3, which is in veryclose agreement with the foregoing result.
3.6 POLYMORPHISM AND ALLOTROPYSome metals, as well as nonmetals, may have more than one crystal structure, a phe-nomenon known as polymorphism. When found in elemental solids, the condition isoften termed allotropy. The prevailing crystal structure depends on both the temper-ature and the external pressure. One familiar example is found in carbon: graphite isthe stable polymorph at ambient conditions, whereas diamond is formed at extremelyhigh pressures.Also, pure iron has a BCC crystal structure at room temperature, whichchanges to FCC iron at 912!C (1674!F). Most often a modification of the density andother physical properties accompanies a polymorphic transformation.
3.7 CRYSTAL SYSTEMSBecause there are many different possible crystal structures, it is sometimes conven-ient to divide them into groups according to unit cell configurations and/or atomicarrangements. One such scheme is based on the unit cell geometry, that is, the shapeof the appropriate unit cell parallelepiped without regard to the atomic positions inthe cell. Within this framework, an xyz coordinate system is established with its originat one of the unit cell corners; each of the x, y, and z axes coincides with one of thethree parallelepiped edges that extend from this corner, as illustrated in Figure 3.4.The unit cell geometry is completely defined in terms of six parameters: the three edgelengths a, b, and c, and the three interaxial angles a, b, and g. These are indicated inFigure 3.4, and are sometimes termed the lattice parameters of a crystal structure.
On this basis there are seven different possible combinations of a, b, and c, anda, b, and g, each of which represents a distinct crystal system. These seven crystalsystems are cubic, tetragonal, hexagonal, orthorhombic, rhombohedral,2 monoclinic,and triclinic. The lattice parameter relationships and unit cell sketches for each are
" 8.89 g/cm3
"14 atoms/unit cell 2 163.5 g/mol 2
[161211.28 # 10$8 cm 2 3/unit cell ] 16.022 # 1023 atoms/mol 2r "
nACu
VCNA"
nACu116R3 12 2NA
52 • Chapter 3 / The Structure of Crystalline Solids52 • Chapter 3 / The Structure of Crystalline Solids
polymorphism
allotropy
2Also called trigonal.
z
y
x
a
!
b
c"
#
Figure 3.4 A unit cell with x, y, and z coordinate axes,showing axial lengths (a, b, and c) and interaxial angles (!, #, and ").
lattice parameters
crystal system
Crystal Systems andUnit Cells for Metals
VMSE
JWCL187_ch03_044-089.qxd 11/9/09 9:31 AM Page 52
•Unit cell geometry defined by:!•The three edge lengths: a, b, c!•The three interaxial angles: α, β, γ
Lattice Parameters
7 crystal systems
Aula 3 - Crystalline Solids - 31 de marzo de 2014
Crystal Systems54 • Chapter 3 / The Structure of Crystalline Solids
Table 3.2 Lattice Parameter Relationships and Figures Showing Unit CellGeometries for the Seven Crystal Systems
AxialCrystal System Relationships Interaxial Angles Unit Cell Geometry
Cubic
Hexagonal
Tetragonal
Rhombohedral (Trigonal)
Orthorhombic
Monoclinic
Triclinic a ! b ! g ! 90°a ! b ! c
a " g " 90° ! ba ! b ! c
a " b " g " 90°a ! b ! c
a " b " g ! 90°a " b " c
a " b " g " 90°a " b ! c
a " b " 90°, g " 120°a " b ! c
a " b " g " 90°a " b " c
ab
c!
"
#
ab
c!
ab
c
aaa
"
aa
c
aaa
c
aa
a
JWCL187_ch03_044-089.qxd 11/9/09 9:31 AM Page 54
54 • Chapter 3 / The Structure of Crystalline Solids
Table 3.2 Lattice Parameter Relationships and Figures Showing Unit CellGeometries for the Seven Crystal Systems
AxialCrystal System Relationships Interaxial Angles Unit Cell Geometry
Cubic
Hexagonal
Tetragonal
Rhombohedral (Trigonal)
Orthorhombic
Monoclinic
Triclinic a ! b ! g ! 90°a ! b ! c
a " g " 90° ! ba ! b ! c
a " b " g " 90°a ! b ! c
a " b " g ! 90°a " b " c
a " b " g " 90°a " b ! c
a " b " 90°, g " 120°a " b ! c
a " b " g " 90°a " b " c
ab
c!
"
#
ab
c!
ab
c
aaa
"
aa
c
aaa
c
aa
a
JWCL187_ch03_044-089.qxd 11/9/09 9:31 AM Page 54
54 • Chapter 3 / The Structure of Crystalline Solids
Table 3.2 Lattice Parameter Relationships and Figures Showing Unit CellGeometries for the Seven Crystal Systems
AxialCrystal System Relationships Interaxial Angles Unit Cell Geometry
Cubic
Hexagonal
Tetragonal
Rhombohedral (Trigonal)
Orthorhombic
Monoclinic
Triclinic a ! b ! g ! 90°a ! b ! c
a " g " 90° ! ba ! b ! c
a " b " g " 90°a ! b ! c
a " b " g ! 90°a " b " c
a " b " g " 90°a " b ! c
a " b " 90°, g " 120°a " b ! c
a " b " g " 90°a " b " c
ab
c!
"
#
ab
c!
ab
c
aaa
"
aa
c
aaa
c
aa
a
JWCL187_ch03_044-089.qxd 11/9/09 9:31 AM Page 54
Aula 3 - Crystalline Solids - 31 de marzo de 2014