australian dod capability guide 2012

8/16/2019 Australian DoD Capability Guide 2012

1/48

DEFENCE CAPABILITY GUIDE

2012


2/48

ACKNOWLEDGEMENTS

Public Version

This publication has been published by the Capability Development Group (CDG).

Copies of this publication are available on the Defence website:http://www.defence.gov.au/header/publications.htm

© Commonwealth of Australia 2012

This work is copyright. Apart from any use as permitted under the Copyright Act 1968, no part may be reproducedby any process without prior written permission from the Department of Defence.

Defence Publishing Service - JUL000/12

WEBSITE

www.defence.gov.au/header/publications.htm


3/48

3

D E F E N C E C A P A B I L I T Y G U I D E 2 0 1 2

CONTENTS

FOREWORD 4

ABBREVIATIONS 6

CAPABILITY DEVELOPMENT GUIDANCE BEYOND 2016 8

PROPOSALS 17

AIR 5077 Phase 5B 19

AIR 5333 Phase 2 20

JP 129 Phase 3 21

JP 154 Phase 3B 22

JP 1544 Phase 2 23

JP 1771 Phase 2 24

JP 2030 Phase 9 25

JP 2044 Phase 6 26

JP 2065 Phase 3 27

JP 2077 Phase 2D 28

JP 3011 Phase 1 30

JP 3025 Phase 2 31

LAND 17 Phase 2 32

LAND 19 Phase 7B 34

LAND 159 Phase 1 35

LAND 907 Phase 2 36

SEA 1000 Phase 3 37

SEA 1000 Phase 4 38

SEA 1360 Phase 1 39

SEA 1442 Phase 5 40

SEA 4000 Phase 4 41

SEA 5000 Phase 1 43

SEA 5000 Phase 2 44

SEA 5000 Phase 3 45


4/48

4


Stephen Smith MP

Minister for DefenceFOREWORD

On 10 July 2012 the Government released the Public Defence Capability Plan (DCP) which outlined the

111 priority projects planned for either First or Second Pass approval over the four year Forward Estimates

period 2012-13 - 2015-16. When I announced the Public DCP, I stated that we would subsequently be releasing

a new document to complement the Public DCP, to be referred to as the Defence Capability Guide (DCG).

The DCG is designed to assist Industry by providing general direction on projects over the six year period

that follows on from the four year Forward Estimates period covered in the Public DCP. The purpose of

the DCG is therefore to provide Industry with guidance regarding Defence’s capability developments

beyond the financial year 2016-17 out to 2021-22. This information is provided to Industry in order to provide

transparency on Government’s capability intentions over the coming decade and to assist them in theirfuture planning.

The DCG will ensure that Industry has information about the Government’s longer term capability intentions,

noting that beyond the four year DCP, there is inevitably more uncertainty, and projects are less well defined

and will be subject to change, in terms of scope, cost and schedule. As a consequence, it is critical to note

that the DCG will remain subject to change as strategic circumstances evolve, new technologies emerge and

priorities are updated to reflect the changing needs of the Australian Defence Force (ADF). This is the nature

of modern Defence major capital equipment procurement.

This guide will be updated on an annual basis to provide ongoing advice on strategic guidance, capability

decisions and resource planning. These will continue to evolve due to a range of reasons that span from the

global economy to the international and regional strategic security position.

The forthcoming White Paper 2013 will shape and provide further detail on the capabilities required in

the future. The White Paper will also inform an updated 2013 Public DCP and DCG.

Like the Public version of the DCP, the DCG is first and foremost a national security document. It is useful in

providing guidance and forward-planning information for Industry, but should not be viewed as an Industry

policy document. The DCG aims to provide Australian Industry with what information we can on our future

capability requirements. It is the Government’s intention to develop and publish revised Defence Industry

Policy Statement (DIPS) as soon as practicable after the 2013 White Paper. The DIPS will continue to evolve

in order to refine guidance to Industry on the opportunities that exist in the Defence sector.


5/48

5


The DCG contains 24 projects or phases of projects beyond the Forward Estimates period and will be

reviewed in light of changing fiscal and strategic circumstances. The level of information on each project

is less definitive than in the Public DCP. This is deliberate. Project information in the DCG is limited,

for example, as Industry engagement and planning may not yet have commenced.

The DCG also excludes those projects that are subject to national security classification restrictions.

I take this opportunity to thank Industry for the positive feedback on the 2012 Public DCP and welcome

further Industry feedback on this, the first Defence Capability Guide.

Stephen Smith MPMinister for Defence


6/48

6


ABBREVIATIONS

ABM Air Battle Management

ADF Australian Defence Force

ADGE Air Defence Ground Environment

AEW&C Airborne Early Warning and Control

AIM Abrams Integrated Management

ASW Anti-Submarine Warfare

AWD Air Warfare Destroyer

BPM Business Process Management

C2 Command and Control

C4 Command, Control, Communications, Computing

C4I Command, Control, Communications, Computing and Intelligence

CBRNE Chemical, Biological, Radiological, Nuclear and Explosive

CDG Capability Development Group

CEC Cooperative Engagement Capability

CIED Counter Improvised Explosive Device

C-RAM Counter Rocket, Artillery and Mortar

DCG Defence Capability Guide

DIE Defence Information Environment

DIPS Defence Industry Policy Statement

EASTROC Eastern Region Operations Centre

ECM Enterprise Content Management

EOD Explosive Ordnance Disposal

ERAM Extended Range Active Missile

ESM Electronic Support Measures

FPECM Force Protection Electronic Counter Measure

GBAD Ground Based Air Defence

GBAMD Ground Based Air and Missile Defence

GEOINT Geospatial Intelligence

GIS Geospatial Information Systems

GSS Geospatial Support System

HATS Helicopter Aircrew Training System

HQ JOC Headquarters Joint Operations Command

IBS Integrated Broadcast Service

ICT Information and Communications Technology

IED Improvised Explosive Device

IME Information Management Element

IOC Initial Operational Capability

IRR Incident Response Regiment


7/48

7


ABBREVIATIONS

ISR Intelligence, Surveillance and Reconnaissance

IT Information Technology

JCSE Joint Command Support Environment

JNLC Joint Non-Lethal Capabilities

JORN Jindalee Operational Radar Network

JSF Joint Strike Fighter

LACM Land Attack Cruise Missile

LHD Landing Helicopter Dock

LOT Life of TypeMARPOL Internat ional Convention for the Prevention of Pollution from Ships

MUAS Multi–Mission Unmanned Aerial System

MBT Main Battle Tank

MIMS Mincom Information Management System

MLIS Materiel Logistic Information System

MOTS Military-off-the-Shelf

MTWAN Mobile Tactical Wide Area Network

NCW Network Centric Warfare

NORTHROC Northern Region Operations Centre

PDCP Public Defence Capability Plan

RAAF Royal Australian Air Force

RAN Royal Australian Navy

RFID Radio Frequency Identification

SA Situational Awareness

S&W Sense and Warn

SAM Surface to Air Missile

SDSS Standard Defence Supply System

SM2 Standard Missile 2

SM6 Standard Missile 6

SOER Special Operations Engineer Regiment

TUAV Tactical Unmanned Aerial Vehicle

UAS Unmanned Aerial System

UAV Unmanned Aerial Vehicle

USN United States Navy

VMF Variable Message Format

WCM Web Content Management

WP09 White Paper 2009


8/48

8


CAPABILITY DEVELOPMENT GUIDANCE

BEYOND 2016The Defence Capability Guide (DCG) identifies to Industry the general capabilities and scope of major

projects that were not listed in the Public Defence Capability Plan (PDCP) 2012 as their approval dates

are beyond the Forward Estimates period 2011-12 - 2015-16.

Government decided that the PDCP 2012 would focus on the expenditures expected over the next

four years; while White Paper 2009 (WP09) outlined significant commitments for Australia’s military capabilities

beyond this period. While these are capabilities that Defence currently plans to progress, the forthcoming

White Paper 2013 will provide further detail on the capabilities required by the future ADF.

The following pages provide details of the 24 major projects and phases that may by included in future DCPs.

These projects are is listed by environmental domain and provide additional information on some of the

key capabilities as a guide for Industry planning purposes. As priorities, strategic circumstances and

new technologies evolve, the DCG will remain an overview of planned future projects and will be subject to

change at any time.


9/48

9


Aerospace Domain

The Aerospace Domain has a number of capabilities which are likely to require replacement or upgrading

post-2016. These capabilities include Tactical Unmanned Aerial Vehicles (TUAVs), Command and Control

nodes, Intelligence, Surveillance, and Reconnaissance (ISR) platforms, and the Air Defence Ground

Environment (ADGE) capability under AIR 5333. These capabilities provide enhanced networking throughout

the ADF and interoperability with our partners.

The P-8A Poseidon is expected to enter service around 2019-2020 timeframe and will provide a replacement

for the ageing AP-3Cs and enhance our maritime intelligence, surveillance, reconnaissance, and response

capability. The P-8A Poseidon will also be supplemented by a Multi-Mission Unmanned Aerial System (MUAS)

capability between 2019-2022.

White Paper 2009 (at para 9.60) advised that the Government had decided that it will acquire around 100

F-35 JSF, along with supporting systems and weapons. AIR 6000 Phase 2A/2B plans to acquire no fewer than

72 F-35A to form three operational squadrons and a training squadron. Phase 2C (unapproved) is the planned

acquisition of a fourth operational JSF squadron and selected support and enabling elements to bring thetotal number of aircraft to around 100. The decision to acquire the fourth operational JSF squadron will be

considered in conjunction with a decision on the withdrawal of the Super Hornet. A decision on this final batch

of JSF is not expected before 2016. This capability is planned to provide Australia with a significant advantage

within the aerospace domain and includes advanced weaponry capable of prosecuting a number of different

threats in a variety of environments.

New Pilot, Air Combat Officer, and Maritime Aviation Warfare Officer training systems will also be

implemented within the 2017-2020 timeframe. This is anticipated to increase the effectiveness and efficiency

of these training systems, potentially allowing increased student numbers and training on advanced

generation aircraft.


10/48

10


Other planned capabilities that fall within the Aerospace Domain that are outside the scope of the Public DCP

2012 timeframe include:

• AIR 5077 Phase 5B AEW&C Mid-Life Upgrade. The AEW&C capability is a critical Command & Control (C2) node and ISR platform; its interoperability with

ADF assets (both extant and emergent) and coalition partners is pivotal to the operational effectiveness of

the capability. Phase 5B is intended to implement a number of growth and enabler upgrades.

• AIR 5333 Phase 2 Vigilare Upgrade. The Vigilare system delivered under AIR 5333 Phase 1 provides theRAAF with an enhanced Air Defence Ground Environment (ADGE) command, control and communications

capability. Phase 2 plans to maintain the effectiveness of the Vigilare capability in an evolving Network

Centric Warfare (NCW) environment and to assure long term supportability. Phase 2 plans to incorporate

emerging technologies, which could include Variable Message Format (VMF), Link 22, Cooperative

Engagement Capability (CEC), and integrated Electronic Support Measures (ESM) and intelligence

sub-systems. This phase will also consider the replacement of the Air Battle Management training facility

at the Eastern Region Operations Centre (EASTROC), and an enhanced simulation capability at both

EASTROC and the Northern Region Operations Centre (NORTHROC).

• JP 129 Phase 3 Tactical Unmanned Aerial Vehicle – Enhancements/Upgrades. This phase will provide enhancements to the ADF TUAV capability. The Phase 3 TUAV capability will be

informed by experience with the Phase 2 capability, and will leverage off technological development in

system and sensor design and employment. Advancements in sensor technology design, output, and

integration into Unmanned Aerial Systems (UAS) as well as platform design and ground system common

architectures are expected to continue, with the Army in particular benefiting from enhanced capabilities.


11/48

11


Enabling Capabilities

Important enabling capabilities will continue to be delivered. Importantly, Defence has secured both its

broadband and narrow band satellite communications in the Indian Ocean region and Pacific Ocean regions.

Examples of some of the key enabling projects and follow-on phases are listed below:

• JP 1544 Phase 2 Enterprise Content Management System Enhancement. Joint Project 1544 Phase2 plans to deliver an evolutionary development/replacement of the initial capability toolset delivered

under Phase 1 of the project, and to address technological advancements in records management. JP1544

plans to improve Defence’s levels of effectiveness and efficiency in managing its holdings of physical and

electronic records, and to ensure ongoing compliance with legislated and standards-based mandatory

Commonwealth record keeping obligations.


12/48

12



13/48

13


Land Domain

The Army continues to execute Plan BEERSHEBA and the associated networking of the Army. Key elements of

these plans are the significant vehicle replacement programs under both LAND 121 (Overlander) and LAND

400. While most aspects of LAND 121 are settled, there will be some fine tuning of vehicles numbers and the

communications fit for each vehicle.

The networking of the Army is a major Defence undertaking which will transform the Service. As the plans

mature, the most cost effective use of technology will be sought to deliver this capability.

Other focus areas in the Land Domain include:

• JP 154 Phase 3B Joint Counter Improvised Explosive Device. Joint Project 154 Phase 3B plans tocontinue a technology refresh of current Force Protection Electronic Counter Measures and Counter

Improvised Explosive Device systems and potentially extend their employment to additional platforms.

Future phases beyond 3B will replace existing Explosive Ordnance Disposal (EOD) robots and further

develop the ADF’s route clearance capability.

• JP 2030 Phase 9 ADF Joint Command Support Environment. Defence intends to build on thecommand and control capabilities provided under the evolving Joint Command Support Environment as

developed in previous phases of the JP2030 Project. Phase 9 is planned to continue the consolidation of

existing Command Support Systems into the Joint Command Support Environment, providing enhanced

Command and Control functionality for ADF operations.

• JP 2077 Phase 2D Improved Logistic Information Systems. Joint Project 2077 Phase 2D plans toaugment and improve areas of Materiel Logistics Enterprise Reporting, Asset Management, and Integrated

Engineering and Maintenance Management. This includes addressing underlying information systems

architecture and data management issues. This core transactional system will be integrated into the future

enhanced ADF Logistics Information and Communications Technology (ICT) deployable capability. This willextend the reach of critical core functions to units on operations and deliver an integrated in-transit cargo

visibility system.


14/48

14


• JP 3011 Phase 1 Joint Non-Lethal Capability. Joint Project 3011 Phase 1 is a new project designed todevelop a robust ADF non-lethal capability that expands the spectrum of response options available

to commanders, ensuring a precise and discriminate effect can be achieved as most appropriate

for the mission.

• JP 3025 Phase 2 Deployable Special Operations Engineer Regiment (SOER) Capability. Joint Project 3025 Phase 2 plans to continue to improve the specialist counter Chemical, Biological,

Radiological, Nuclear and Explosive (CBRNE) capability within the ADF. This will be achieved by expanding

the capabilities of the SOER and improving specialist CBRNE reconnaissance and search support to

Special Forces operations.

• LAND 17 Phase 2 Artillery Digital Terminal Control System. LAND 17 Phase 2 plans to update andsustain the Digital Terminal Control Systems and Tactical Full Motion Video capabilities for coordination of

Joint Fires to its Life Of Type (LOT) in about 2030.

• LAND 19 Phase 7B Ground Based Air and Missile Defence Enhancements or Replacement.

LAND 19 Phase 7B plans to build upon the Counter Rocket Artillery and Mortar (C-RAM) ‘Sense and Warn’Force Protection capability to develop a GBAMD Force Protection capability that will be able to sense,

warn of, and intercept a wider variety of threats. The capability may also provide airspace surveillance.

These phases will include a Command, Control, Communications, Computing (C4) management system

that will be capable of operating autonomously and/or within a Joint or Coalition Air and Missile Defence

network contributing to ADF Airspace Management and Air-Land Integration.

• LAND 159 Phase 1 ADF Small Arms Replacement. LAND 159 Phase 1 is a new project to replace theADF small arms fleet ranging from pistols through to the 7.62mm calibre machine gun. The small arms

replacement project plans to develop capability solutions for personal defence weapons, individual

combat weapons and support weapons.

• LAND 907 Phase 2 Main Battle Tank Upgrade. LAND 907 Phase 2 plans to continue to develop theLand force war fighting advantages afforded by LAND 907 Phase 1 through enhancements in knowledge,

lethality, mobility, survivability, and sustainability of the M1A1-SA Abrams Tank and the M88A2 Hercules

Recovery Vehicle to their LOT in about 2030. This phase plans to include integration of developing Network

Centric Warfare interface control systems; operator, supervisor, instructor, and support training; training and

simulation equipment and technical support; and training technology review.


15/48

15


Maritime DomainAlready approved capabilities that will continue to enter service after 2016 include the Hobart Class

Destroyers, the second Canberra Class LHD and the modernised ANZAC Frigates. These platforms will

transform the RAN, providing it with a more robust blue water and littoral capability.

Future planned phases related to these platforms include:

• JP 1771 Phase 2 Geospatial Support Systems for the Land Force (Upgrade). Joint Project 1771 Phase 2will further develop the Geospatial Support System by replacing system components delivered in

Phase 1 that are beyond life of type and introducing other system components that could not be

delivered in Phase 1.

• JP 2044 Phase 6 Defence Geospatial Intelligence Capability Enhancement. Joint Project 2044 Phase6 plans to significantly enhance Defence Geospatial Intelligence (GEOINT) capability, reflecting changes in

requirements, GEOINT collection capabilities and information technologies over the next decade.

• JP 2065 Phase 3 Integrated Broadcast Service. Joint Project 2065 Phase 3 plans to further develop theIntegrated Broadcast Service through investigation of new radio technologies. Phase 3 may also expand

the user base through improved network dissemination.

• SEA 1000 Phases 3 and 4 Future Submarine. These follow on phases plan to complement theFuture Submarine and sea-based strike capability by providing stockholdings of the selected weapons

for the Future Submarine fleet and the weapons required for Test and Evaluation, training, and tactical

development. The Future Submarine will be provided with a maritime based land attack cruise missile

(LACM) capability, including weapons control and mission planning sub-systems.

• SEA 1360 Phase 1 Maritime Extended Range Air Defence. SEA 1360 Phase 1 plans to provide theRAN with a Standard Missile 6 (SM-6) extended range active missile (ERAM) capability for the

Hobart Class Destroyers.

• SEA 1442 Phase 5 Maritime Communication Modernisation. SEA 1442 Phase 5 plans to enhanceand modernise the communications capability of the Canberra Class LHD, Hobart Class Destroyers and

other legacy platforms. This will include modernisation and improvements to the technology baselined on

the Mobile Tactical Wide Area Network (MTWAN) capability being delivered by SEA 1442 Phases 3, 4 and

communications systems improvements.

• SEA 4000 Phase 4 Air Warfare Destroyer (AWD) – Maritime Based Strategic Strike. SEA 4000 Phase4 plans to fit the Hobart Class Destroyers with a maritime based LACM capability. This phase will seek

to include procurement of weapons, platform integration and development of the Mission Planning

infrastructure required for employment of the capability.

• SEA 5000 Phases 1, 2 and 3 Future Frigate. This multi-phase project plans to introduce into servicethe next generation of naval surface combatants, which will be larger than the ANZAC Class vessels,

equipped with a strong emphasis on submarine detection and response options, and capable of

independent and task group operations.


16/48


17/48

DEFENCE CAPABILITY PLAN

PROPOSALS

17


18/48

18


Project Number Project Name Program Sub Program Page

AIR 5077 Ph 5B AEW&C Mid-Life Upgrade Aerospace Aerospace Battlespace

Management

19

AIR 5333 Ph 2 Vigilare Upgrade Aerospace Aerospace Battlespace

Management

20

JP 129 Ph 3 Tactical Unmanned Aerial

Vehicles – Enhancements/

Upgrades

Aerospace Integrated Aerospace

Systems

21

JP 154 Ph 3B Joint Counter improvised

Explosive Device

Land Land Support 22

JP 1544 Ph 2 Enterprise Content

Management System

Enhancement

Integrated

Capability

External¹ 23

JP 1771 Ph 2 Geospatial Support System for

the Land Force (Upgrade)

Maritime Intelligence and Geospatial 24

JP 2030 Ph 9 ADF Joint Command Support

Environment

Land Joint C3 25

JP 2044 Ph 6 Defence Geospatial

Intelligence Capability

Enhancement

Maritime Intelligence and Geospatial 26

JP 2065 Ph 3 Integrated Broadcast Service Maritime Intelligence and Geospatial 27

JP 2077 Ph 2D Improved Logistics Information

Systems

Land External¹ 28

JP 3011 Ph 1 Joint Non-Lethal Capability Land Land Combat 30

JP 3025 Ph 2 Deployable Special Operations

Engineer Regiment (SOER)

Capability

Land Land Combat 31

LAND 17 Ph 2 Artillery Digital Terminal Control

System

Land Land Combat 32

LAND 19 Ph 7B Ground Based Air & Missile

Defence Enhancements or

Replacement

Land Land Combat 34

LAND 159 Ph 1 ADF Small Arms Replacement Land Land Combat 35

LAND 907 Ph 2 Main Battle Tank Upgrade Land Land Combat 36

SEA 1000 Ph 3 Future Submarine – Weapons Future Submarine Future Submarine 37

SEA 1000 Ph 4 Future Submarine – Maritime

Based Strategic Strike

Maritime Maritime Strike 38

SEA 1360 Ph 1 Maritime Extended Range Air

Defence

Maritime Surface Combatant 39

SEA 1442 Ph 5 Maritime Communication

Modernisation

Maritime Surface Combatant Systems 40

SEA 4000 PH 4 Air Warfare Destroyer (AWD) –

Maritime Based Strategic Strike

Maritime Maritime Strike 41

SEA 5000 Ph 1 Future Frigate Maritime Surface Combatant 43

SEA 5000 Ph 2 Future Frigate – Weapons Maritime Surface Combatant 44

SEA 5000 Ph 3 Future Frigate – Maritime Based

Strategic Strike

Maritime Maritime Strike45

1. Not Sponsored by CDG


19/48

19

AEROSPACE AEROSPACE BATTLESPACE MANAGEMENT

AIR 5077 Phase 5B AEW&C Mid-Life Upgrade

AIR 5077

Background

The Wedgetail Airborne Early Warning and Control (AEW&C) capability delivered under AIR 5077 comprises

six aircraft, associated support systems and facilities. The AEW&C operational environment has evolved

significantly since initial acquisition contract signature and the capability must remain interoperable with

ADF assets and partners. Additionally, Defence must anticipate the introduction of new technologies.

The remainder of the AIR 5077 program comprises the following phases:

• Phase 4 is a capability study to inform Phase 5B AEW&C Mid-Life Upgrade.

• Phase 5A will complete mandatory upgrades that will ensure compliance with evolving military and

civilian standards.

• The AEW&C capability is a critical Command & Control (C2) node and ISR platform, and interoperability

with ADF assets (both extant and emergent) and coalition partners is pivotal to the operational

effectiveness of the capability. Phase 5B is intended to implement a number of growth and

enabler upgrades.

AIR 5077 Phase 5B AEW&C MID-LIFE UPGRADE

Scope

The AEW&C capability is a critical Command & Control (C2) node and Intelligence, Surveillance and

Reconnaissance (ISR) platform and must continue to evolve in an increasingly complex, networked

environment. Interoperability with ADF assets (both extant and emergent) and partners is pivotal

to the continued operational effectiveness of the AEW&C capability.

Planned ScheduleFirst Pass Approval FY 2019-20 to FY 2021-22

Year-of-Decision FY 2021-22 to FY 2023-24

Initial Operational Capability FY 2025-26 to FY 2027-28

Point of Contact

Capability Development Group: Deputy Director Battlespace Management

Phone: (02) 6265 2216



20/48

20


AEROSPACE AEROSPACE BATTLESPACE MANAGEMENT

AIR 5333 Phase 2 Vigilare Upgrade

AIR 5333

Background

The Vigilare system delivered under AIR 5333 Phase 1 provides the Royal Australian Air Force (RAAF) with an

enhanced Air Defence Ground Environment (ADGE) command, control and communications capability.

AIR 5333 Phase 2 plans to maintain the effectiveness of the Vigilare capability in an evolving Network Centric

Warfare (NCW) environment and to assure long term supportability.

AIR 5333 Phase 2 Vigilare Upgrade

Scope

AIR 5333 Phase 2 is intended to incorporate emerging technologies such as Variable Message Format (VMF),

Link 22, Cooperative Engagement Capability (CEC), and integrated ESM/Intelligence sub-systems. This phase

will also consider the replacement of the Air Battle Management (ABM) training facility at the Eastern Region

Operations Centre (EASTROC), and an enhanced simulation capability at both EASTROC and the Northern

Region Operations Centre (NORTHROC).

Planned Schedule

First Pass Approval FY 2018-19 to FY 2020-21



Point of Contact

Capability Development Group: Deputy Director Battlespace Management

Phone: (02) 6265 5534


21/48

21


AEROSPACE INTEGRATED AEROSPACE SYSTEMS

JP 129 Phase 3 Tactical Unmanned Aerial Vehicle –

Enhancements/Upgrades

JP 129

Background

JP 129 Phase 2 (approved) is providing Tactical Unmanned Aerial Vehicles (TUAVs) to support land forces on

operations. These systems will have a planned Life of Type (LOT) of 10 years. This seemingly short life is due to

the technological advancements that are being made to Unmanned Aerial Systems (UAS) and payloads.

JP 129 Phase 3 will provide an ongoing organic Intelligence, Surveillance and Reconnaissance (ISR) capability

for land force operations, as well as provision of a system that can be operated from or within confined areas

(such as an urban environment).

JP129 Phase 3 Tactical Unmanned Aerial Vehicle –Enhancements/Upgrades

Scope

This phase will provide enhancements to the ADF TUAV capability. The Phase 3 TUAV capability will be

informed by experience from the Phase 2 capability, and will leverage off technological development in

system and sensor design and employment.

Advances in sensor technology design, output and integration into UAS as well as platform design

and ground system common architectures are expected to continue. Enhancement/upgrade of the

TUAV capability is expected to leverage off these developments, with the Army in particular benefiting

from enhanced capabilities.

Planned Schedule




Point of Contact

Capability Development Group: Deputy Director Emerging Systems

Phone: (02) 6265 6202


22/48

22

LAND LAND SUPPORT

JP 154 Phase 3B Joint Counter Improvised

Explosive Device

JP 154

Background

The ADF’s Counter Improvised Explosive Device (CIED) capability encompasses a range of systems and

measures to mitigate or defeat the effects of an adversary’s use of IEDs. JP 154 aims to develop those CIED

systems and measures in accordance with strategic priorities while remaining sufficiently flexible to respond

to unpredictable changes in the threat environment and take full advantage of technological advances.

JP 154 Phase 3 has been split into two sub phases: JP 154 Phase 3A (Project Ningaui) gained Government

approval in December 2011 and has provided route clearance systems in response to operational

requirements; the remaining capabilities will be sought under JP 154 Phase 3B.

JP 154 Phase 3B Joint Counter Improvised Explosive Device

Scope

Phase 3B will continue the technology refresh of current Force Protection Electronic Counter Measure (FPECM)

and CIED systems and potentially extend their employment to additional platforms. Phase 3B also aims to

replace existing Explosive Ordnance Disposal (EOD) robots and further develop the ADF’s route

clearance capability.

Planned Schedule




Point of Contact

Capability Development Group: Deputy Director Engineer/CBRNEPhone: (02) 6265 2660



23/48

23

INTEGRATED CAPABILITY EXTERNAL

JP 1544 Phase 2 Enterprise Content

Management System

Enhancement

JP 1544

Background

JP 1544 plans to improve Defence’s levels of effectiveness and efficiency in managing its holdings of physical

and electronic records, and to ensure ongoing compliance with legislated and standards-based mandatory

Commonwealth record keeping obligations.

The project will leverage off additional capability that the selected solution might provide in order to realise

additional benefits that contribute towards meeting the information and content management business needs

of Defence users accessing the Defence Protected and Secret Networks.

The solution will overcome deficiencies associated with the use of disparate records and document

management systems across the Department through utilisation of a standard Enterprise Content

Management (ECM) capability, standardisation of business processes and enhanced capability that enables

departmental knowledge management and business intelligence initiatives.

JP 1544 Phase 1 (unapproved) is detailed in the Public Defence Capability Plan 2012. The phase is intended to

deliver a corporate ECM capability across the Defence business and operational domains.

ECM consists of the following critical capabilities:

• Content-Focused Business Process

Management (BPM);

• Production Imaging;

• Document Management;

• Document-Centric Collaboration;

• Records Management;

• Web Content Management (WCM);

• Electronic Forms;

• Digital Asset Management; and

• Architectural Flexibility.

JP 1544 Phase 2 Enterprise Content Management System Enhancement

ScopeThis phase is intended to deliver an evolutionary development/replacement of the initial capability toolset

and will cover technological advancements in records management.

Planned Schedule




Point of ContactChief Information Officer Group: Assistant Secretary Enterprise Architecture Branch

Phone: (02) 6144 4071



24/48

24

MARITIME INTELLIGENCE AND GEOSPATIAL

JP 1771 Phase 2 Geospatial Support Systems

for the Land Force (Upgrade)

JP 1771

BackgroundJP 1771 will modernise the Geospatial Support System (GSS), which provides for the integrated measurement,

analysis, management and presentation of geospatial data, imagery and information to ADF forces. It will

sustain geospatial support to both deployed forces and those conducting operations and training within

Australia. While it will be primarily focussed on equipping the 1st Topographical Survey Squadron, the project

will also provide for other Geospatial Information Systems (GIS) and survey elements.

The GSS will provide rapid support to the ADF Network Centric Warfare (NCW) environment using available

Information and Communications Technology (ICT) infrastructures and will comprise people, processes,

equipment, data and ICT sub-systems. It will inform an accurate Common Operating Picture and situational

awareness across the theatre of operations, and will support new weapon targeting systems and accurate

delivery of weapon effects.

Geospatial data and information will be used to ascertain the impact of the physical environment on the

conduct of military operations and assist with infrastructure planning and development. Selected outputs will

also inform strategic geospatial data, imagery and information resources and planning activities.

JP 1771 Phase 1 (unapproved) is detailed in the Public Defence Capability Plan 2012. The phase aims

to modernise and automate the land geospatial capability to enhance the collection, processing andpresentation of geospatial data with minimum production time and effort.

JP 1771 Phase 2 Geospatial Support Systems for the Land Force(Upgrade)

ScopeJP 1771 Phase 2 will enhance and continue to modernise the ability to collect, process and manage geospatial

data, and present geospatial data, imagery and information to the ADF.

Phase 2 will improve geospatial engineering capabilities to sustain the provision of support to deployed

forces, fill capability gaps unable to be filled in Phase 1 and to support infrastructure tasks in the deployed

environment. The project will focus on the delivery of geospatial information to benefit operational planners

and other users involved in the conduct of operations, training and non-warlike tasks.

The capability needs analysis for the project has not started and the project requirements will be refined

nearer to First Pass.

Planned Schedule




Point of ContactCapability Development Group: Deputy Director Imagery and Geospatial Information Systems

Phone: (02) 6265 3827



25/48

25

LAND JOINT C3

JP 2030 Phase 9 ADF Joint Command

Support Environment

JP 2030

Background

The Joint Command Support Environment (JCSE) is evolving from the development and integration of

several new and existing command support systems, including the Joint Command Support System, Maritime

Command Support System, Air Command Support System, Special Operations Command Support Systems

and the Battlefield Command Support System (part of Project LAND 75).

Other phases include:

• Phases 1 – 6 (complete) delivered a ‘core’ command support system to support the planning and conduct

of joint operations. This system was delivered to strategic, operational and tactical level headquarters as

well as selected ADF units.

• Phases 7/7B (complete) provided further roll-out and enhancement of the Joint and Air Command

Support Systems.

• Phase 8 (approved) builds upon the capability delivered under the previous phases of JP 2030 and in

particular extends functionality through the development of applications that support the planning and

conduct of ADF networked operations. Phase 8 is primarily focused on the delivery of these services to

Headquarters Joint Operations Command (HQ JOC) and other fixed headquarters locations.

JP 2030 Phase 9 ADF Joint Command Support Environment

Scope

Phase 9 will further establish the framework for the JCSE that will continue to consolidate existing Command

Support Systems into a single integrated environment linking all elements of the ADF. It is proposed to extend

the JCSE to include Battlefield and Maritime command support requirements.

Planned Schedule




Point of Contact

Capability Development Group: Deputy Director Command and Control Systems

Phone: (02) 6265 4086



26/48

26


JP 2044 Phase 6 Defence Geospatial

Intelligence Capability

Enhancement

JP 2044

Background

JP 2044 is a multi-phased project designed to develop and sustain a Defence capability to exploit geospatial

data gathered from multiple sources including space-based surveillance.


• Phase 2A (complete) has delivered system updates and conducted risk reduction activities in preparation

for the main acquisition phase.

• Phase 2B (complete) was the major acquisition phase for Information Technology (IT), communications and

training infrastructure to support a space-based surveillance capability.

• Phase 4A (unapproved) is further detailed in the Public Defence Capability Plan 2012. This phase will

commence the implementation of a modernised architecture for the Australian Geospatial Intelligence

(GEOINT) system.

• Phase 4B (unapproved) is further detailed in the Public Defence Capability Plan 2012. This phase seeks

to further improve the allied collaborative environments and national collaboration by networking and

developing interoperability with non-Defence intelligence and other government agencies.

• Phase 5 (unapproved) is detailed in the Public Defence Capability Plan 2012. This phase seeks to further

improve allied collaborative environments as well as national collaboration.

JP 2044 Phase 6 Defence Geospatial Intelligence Capability Enhancement

Scope

Phase 6 seeks to implement a significant enhancement of Defence GEOINT capability, reflecting changes in

requirements, GEOINT collection capabilities and information technologies over the next decade.

Planned Schedule




Point of Contact

Capability Development Group: Deputy Director Imagery and Geospatial Information Systems

Phone: (02) 6265 6426



27/48

27


JP 2065 Phase 3 Integrated Broadcast Service

JP 2065

Background

This service aggregates and manages tactically significant information produced by Australian and allied

intelligence, surveillance and reconnaissance organisations and disseminates it directly to deployed forces.

JP 2065 Phase 1 (approved) is delivering a proof-of-concept Integrated Broadcast Service (IBS) functionality

to the ADF. This functionality included the establishment of an Information Management Element (IME) which

correlates and bridges information between a number of computer networks, satellite links and real time

tactical data links. This capability forms an important component of the ADF’s Tactical Information Exchange

Environment while concurrently supporting closer allied interoperability.

JP 2065 Phase 2 (unapproved) will further extend the Phase 1 capability by upgrading the Australian Integrated

Broadcast Service to maintain compatibility with allies, introducing new stystem capabilities and extending the

ADF roll-out of the system.

JP 2065 Phase 3 Integrated Broadcast Service

ScopePhase 3 aims to further develop the IBS capability through investigation of new radio technologies. It may also

expand the user base through improved network dissemination.

Planned Schedule




Point of ContactCapability Development Group: Deputy Director Intelligence Systems

Phone: (02) 6265 6079



28/48

28

LAND EXTERNAL

JP 2077 Phase 2D Improved Logistics

Information Systems

JP 2077

Background

The Defence Materiel Logistic Information System (MLIS) exists to support both day-to-day operations and the

strategic management of the Department’s materiel resources. It underpins:

• The generation of combat power by providing ADF units with logistics information systems support in the

Joint environment;

• The provision of support to Defence’s business activities; and

• High-level reporting to Government.

JP 2077 is a multi-phased proposal to improve Defence’s Logistics Information Systems:

• Phase 1 (complete) set the context for the program and confirmed the scope and conceptual

requirements for the improved MLIS.

• Phase 2A (complete) delivered a range of targeted products that served to refine the direction of the

program. Together, these products established the enabling structures, processes and plans to ensure thatthe following phases pursued a ‘whole of capability’ approach to the development of the future MLIS.

• Phase 2B.1 (in acquisition) is upgrading the Standard Defence Supply System (SDSS) from Mincom

Information Management System (MIMS) v4 to MIMS v6, which is a MOTS variant of the current v5 product

known as ‘Ellipse’. This upgrade is aimed at providing the foundation system for the establishment of

an integrated MLIS, with an approved financial module that is compliant with the Australian Equivalent

International Financial Reporting Standards.

• Phase 2C (complete) delivered an interim Radio Frequency Identification (RFID) asset tracking system

including both hardware and software, based on the proprietary Savi Tag system.

• Phase 3 (DCP) will enhance the ADF Logistics Information and communication Technology (IDT)deployable capability by extending the reach of critical core functions to units on operations and

delivering an integrated in-transit cargo visibility system. This will be achieved through full integration

with the core transactional system of the ADF’s Military Integrated Logistics Information System, including

standardised user interface.



29/48

29

LAND EXTERNAL


JP 2077 Phase 2D Improved Logistics

Information Systems

JP 2077 Phase 2D Improved Logistics Information Systems

Scope

JP 2077 aims to incrementally upgrade and enhance Defence’s Logistics Information Systems to ensure

leading edge support continues to be provided in support of war fighting and corporate objectives.

This phase will leverage and integrate existing systems and acquire new systems and capabilities to bring

about enhancements in the areas of engineering and maintenance management (including repairable Items),

enterprise reporting and classified assets management. Phase 2D also plans to address the underlying

information systems architecture in support of phase components. The business process improvement and

transformation activities necessary to exploit these initiatives are also part of this phase.

Planned Schedule

First Pass Approval Completed



Point of Contacts

Capability Development Group: Project Manager Materiel Logistic Information Systems

Phone: (02) 6265 2335


30/48

30

LAND LAND COMBAT

JP 3011 Phase 1 Joint Non-Lethal Capability

JP 3011

Background

The current ADF Joint Non-Lethal Capabilities (JNLC) are weapons-based, disparate in nature and limited in

the variety of effects and the distance over which these effects can be generated.

Recent ADF operations have demonstrated limitations in the use of options that rely on lethal force. A robust

JNLC can expand the spectrum of response options available to commanders and soldiers to provide a

flexible capability to meet mission requirements.

The JNLC can offer deployed ADF force elements additional tools to permit a graduated response to a

threat, where an instantaneous lethal response is not immediately appropriate. By developing enhanced and

modernised JNLC options, the ADF will be able to achieve more precise and discriminate effects and employ

a broader range of response options.

JP 3011 Phase 1 Joint Non-Lethal Capability

Scope

This phase seeks to update the non-lethal capabilities of the ADF across all three Services, ensuring these

capabilitied continue to be relevant to the threats faced now and in the future. This phase will replace existing

non-lethal weapons and provide some enhanced non-lethal capabilities.

Planned Schedule




Point of ContactCapability Development Group: Project Manager Small Arms

Phone: (02) 6265 1863



31/48

31

LAND LAND COMBAT

JP 3025 Phase 2 Deployable Special

Operations Engineer Regiment

(SOER) Capability

JP 3025

Background

Global events and recent deployments have heightened awareness of the potential for large-scale Chemical,

Biological, Radiological, Nuclear and Explosive (CBRNE) incidents. The Special Operations Engineer

Regiment (SOER) was raised to provide responses to domestic and overseas CBRNE incidents.

JP 3025 Phase 2 Deployable Special Operations Engineer Regiment(SOER) Capability

Scope

JP 3025 Phase 2 will continue to develop and mature the counter-CBRNE capability established in Phase 1.

This may include additional equipment and specialist training.

Planned Schedule




Point of Contact

Capability Development Group: Deputy Director Special Operations

Phone: (02) 6265 4643



32/48

32

LAND LAND COMBAT

LAND 17 Phase 2 Artillery Digital Terminal

Control System

LAND 17

Background

The Australian Army’s current offensive support system was based on procedures that date back to the 1960s,

and ammunition and howitzer technologies developed in the 1970s that were introduced into Australian

service in the 1980s. The changing nature of operations in land and littoral environments require the Army’s

offensive support system to apply precise lethal and non-lethal effects from mortars, howitzers, ships andaircraft over large areas of the battlefield. The modernised offensive support system will be characterised

by responsiveness, high tactical mobility and increased autonomy. It is intended that the modernised system

will complement current and future ADF surveillance, target acquisition, land logistic capabilities and the

Networked Army.

LAND 17 is a program of projects that will enhance the Australian Army’s indirect fire system through the

replacement of the 105mm Hamel and 155mm M198 Howitzer fleets with towed lightweight 155mm guns,

enhanced battle management systems and targeting systems for fire support and precision/near precision

guided munitions.

LAND 17 is split into several phases:

• Phase 1A (approved) is acquiring four batteries (plus training and support guns) of the M777A2

Lightweight Howitzer, near precision guided munitions – the Precision Guidance Kit course correcting fuse,

and a networked Battle Management System-Fires which includes the Advanced Field Artillery Tactical

Data System and its communications bearers.

• Phase 1B (approved) is acquiring a Digital Terminal Control System capability to improve coordination and

terminal control of air, maritime and land fires.

• Phase 1C.1 is further detailed in the Public Defence Capability Plan 2012, it will acquire a further two

batteries (plus training and support guns) of the M777A2 Lightweight Howitzer.

• Phase 1C.2 is further detailed in the Public Defence Capability Plan 2012, it will investigate, select, acquire

and certify a new ammunition system for use within the M777A2 Lightweight Howitzers acquired under

earlier phases.



33/48

33

LAND LAND COMBAT


LAND 17 Phase 2 Artillery Digital Terminal

Control System

LAND 17 Phase 2 Artillery Digital Terminal Control System

Scope

The Digital Terminal Control System comprises a number of sub-component systems. To retain linkages with a

variety of air, maritime and land platforms the sub-systems will require assessment and refreshes of hardwareand software on a continuous basis, to remain effective in an increasingly complex operational and high

technology defined environment.

Planned Schedule

First Pass Approval Combined pass



Point of Contact

Capability Development Group: Deputy Director Combat Support

Phone: (02) 6265 3933


34/48

34

LAND LAND COMBAT

LAND 19 Phase 7B Ground Based Air and Missile

Defence Enhancements or

Replacement

LAND 19

Background

LAND 19 Phase 7 is centred upon a force protection capability by Ground Based Air and Missile Defence

(GBAMD) that will be able to sense, manage and mitigate the weapon and sensor effects of fixed and

rotary wing platforms, unmanned aerial vehicles (UAV), stand-off weapons, Counter-Rocket, Artillery

and Mortar/Missile (C-RAM). The mitigation of the weapon and sensor effects will be scalable from‘Sense and Warn’ (S&W) (consequence reduction) to ‘interception’ (threat removal). Concurrently the

capability will also provide airspace surveillance to ensure friendly force deconfliction of friendly artillery,

mortars, fixed and rotary wing platforms, and UAVs.

The GBAMD capabilities will be managed by a Command, Control, Communications, Computing and

Intelligence (C4I) system that will be capable of operating autonomously and/or within a joint/coalition air

and missile defence network. This capability will provide greater fidelity in joint and coalition airspace and

contribute to ADF airspace management and air land integration.

LAND 19 Phase 7B Ground Based Air and Missile Defence Enhancements

or Replacement

Scope

Phase 7B will build upon the GBAMD ‘Sense and Warn’ Force Protection capability procured under Phase 7A.

It will absorb the Phase 7A RAM ‘Sense and Warn’ functionality in to a GBAMD Force Protection capability that

will be able to sense, manage and mitigate the weapon and sensor effects.

Planned Schedule




Point of Contact

Capability Development Group: Project Manager Air Defence

Phone: (02) 6265 4441



35/48

35

LAND LAND COMBAT

LAND 159 Phase 1 ADF Small Arms Replacement

LAND 159

Background

The current ADF fleet of small arms will reach life of type during the period 2021-2025. Project LAND 159 Phase 1

will replace most of the ADF small arms with capability solutions for the following requirements:

• Personal defence weapon;

• Individual combat weapons; and

• Support weapons.

LAND 159 Phase 1 ADF Small Arms Replacement

Scope

Phase 1 will replace some or all of the current fleet of ADF small arms with a range of small arms solutions

that provide improved target acquisition and lethality.

Planned Schedule




Point of Contact

Capability Development Group: Project Manager Small Arms

Phone: (02) 6265 1863



36/48

36

LAND LAND COMBAT

LAND 907 Phase 2 Main Battle Tank Upgrade

LAND 907

Background

The M1A1 Abrams Integrated Management (AIM) Situational Awareness (SA) Main Battle Tank (MBT) procured

under LAND 907 Phase 1 provided the ADF with a more modern, survivable and interoperable MBT capability

in order to support the combined arms team in close combat. Fifty-nine M1A1 AIM SA MBTs and seven

M88A2 Hercules Armoured Recovery Vehicles have been introduced into service under LAND 907 Phase 1.LAND 907 Phase 2 will maintain the operational capability edge provided by the M1A1 fleet out to 2030.

LAND 907 Phase 2 Main Battle Tank Upgrade

Scope

Phase 2 is to continue the Land force war fighting advantage afforded by LAND 907 Phase 1 through delivery

of enhancements in knowledge, lethality, mobility, survivability and sustainability of the M1A1 MBT out to its

Life of Type of 2030.

Phase 2 will provide a series of upgrades to achieve integration of developing Network Enabled Capability

interface control systems; operator, supervisor, instructor and support training; training and simulation

equipment and technical support; capability enhancements and training technology review. Integration of

the MBT capability into the Combined Arms Fighting System is a key consideration as the project and

LAND 400 develop.

Planned Schedule




Point of ContactCapability Development Group: Project Manager Combat (Heavy)

Phone: (02) 6265 4918



37/48

37

FUTURE SUBMARINES FUTURE SUBMARINE

SEA 1000 Phase 3 Future Submarine - Weapons

SEA 1000

Background

In the 2009 White Paper, the Government has taken the view that our future strategic circumstances necessitate

a substantially expanded fleet of 12 submarines. This expanded capability is required to sustain a force at

sea large enough in a crisis or conflict to be able to defend our approaches (including at considerable

distance from Australia, if necessary), protect and support other ADF assets, and undertake certain strategicmissions where the stealth and other operating characteristics of highly-capable advanced submarines

would be crucial.

SEA 1000 will provide Australia with a new and more potent submarine capability with greater range, longer

patrol endurance and increased capability compared with the Collins Class submarine. Key capabilities

will be in the areas of anti-submarine warfare; anti-surface warfare; strike; intelligence, surveillance and

reconnaissance; electronic warfare; mine warfare; and support to advance force operations.

It is expected that the Future Submarine project will undertake a competitive, staged acquisition process to

acquire this capability. The project will be the largest and most complex Defence acquisition yet conducted.

It is expected to be considered by Government on multiple occasions as information is gathered that

facilitates Government decision making.

Other phases of this program will be:

• Phase 1 & 2: Acquisition

• Phase 4: Strike Capability

SEA 1000 Phase 3 Future Submarine - Weapons

Scope

This phase of the project will provide the selected weapons for the Future Submarine fleet and the weapons

required for Test and Evaluation, training and tactical development (Raise, Train, Sustain).

Planned Schedule


Year-of-Decision TBD

Initial Operational Capability It is anticipated that IOC will not be achieved before 2025

Point of Contact

Capability Development Group: Director Future Submarine Capability Development

Phone: (02) 6265 2262



38/48

38

MARITIME MARITIME STRIKE

SEA 1000 Phase 4 Future Submarine - Maritime


SEA 1000

Background

As part of the 2009 Defence White Paper preparations, significant work was undertaken to identify and

quantify the maritime capability developments that would be required to meet Government’s expectations.

SEA 1000, the Future Submarine and maritime based land attack cruise missile (LACM) capability, was a result

of that process.

SEA 1000 will provide Australia with a new and more potent capability with greater range, longer patrol

endurance and increased capability compared with the Collins Class submarine. Key capabilities will be in

the areas of anti-submarine warfare; anti-surface warfare; strike; intelligence, surveillance and reconnaissance;

electronic warfare; mine warfare; and support to advance force operations.

It is expected that the Future Submarine project will undertake a competitive, staged acquisition process to

acquire this capability. The project will be the largest and most complex Defence acquisition yet conducted.

It is expected to be considered by Government on multiple occasions as information is gathered that

facilitates Government decision making.

Other phases of this program will be:

• Phase 1 & 2: Acquisition

• Phase 3: Future Submarine Weapons

SEA 1000 Phase 4 Future Submarine - Maritime Based Strategic Strike

Scope

This phase intends to provide for the acquisition of maritime-based land-attack cruise missiles, weapon control

and mission planning sub-systems for the Future Submarines, as well as an integrated logistic support system

including documentation, training and support equipment. The systems will complement the land attack strike

weapon systems proposed for the Air Warfare Destroyer (AWD) (SEA 4000 Phase 4) and Future Frigate

(SEA 5000 Phase 3) to broaden the Government’s strategic strike options.

Planned Schedule


Year-of-Decision TBD

Initial Operational Capability It is anticipated that IOC will not be achieved before 2025

Point of Contact

Capability Development Group: Deputy Director Surface Combatant and Maritime Strike

Phone: (02) 6265 4031



39/48

39

MARITIME SURFACE COMBATANT

SEA 1360 Phase 1 Maritime Extended Range

Air Defence

SEA 1360

Background

The Royal Australian Navy’s (RAN) Hobart Class Destroyers being acquired through SEA 4000 Phase 3 are

intended to provide an area air defence capability utilising the Standard Missile-2 (SM-2) medium range

surface-to-air missile (SAM).

In order to enhance the air defence capabilities of the Hobart Class Destroyers against emerging air

threats the 2009 White Paper stated that the Hobart Class Destroyers will be equipped with the Standard

Missile-6 (SM-6) long-range SAM. The SM-6 missile is the most advanced weapon of its type. When combined

with the complementary Cooperative Engagement Capability (CEC) of the Hobart Class Destroyers to enable

the ship to act as part of a wider ‘grid’ of sensor and weapon platforms that can share surveillance and

targeting data, the SM-6 missile will extend the air protection offered by the Hobart Class Destroyers.

SEA 1360 Phase 1 Maritime Extended Range Air Defence

Scope

SEA 1360 Phase 1 is to deliver the SM-6 Extended Range Active Missile (ERAM) capability for the

Hobart Class Destroyers.

Planned Schedule




Point of Contact

Capability Development Group: Deputy Director Surface Combatant and Maritime StrikePhone: (02) 6265 4031



40/48

40

MARITIME SURFACE COMBATANT SYSTEMS

SEA 1442 Phase 5 Maritime Communication

Modernisation

SEA 1442

Background

SEA 1442 is a multi-phased program that aims to upgrade and modernise maritime communications

systems on RAN ships to allow networked communications between selected major surface vessels within

a task group. The proposal incorporates upgrade of the communications and information management

infrastructure of the RAN.


• Phase 1 (complete) was a scoping study.

• Phase 2B (complete) was a project definition study which refined the scope of work for phases 3 and 4.

• Phase 3 (in progress) is providing an initial enhanced ADF maritime communications capability with the

introduction of the Mobile Tactical Wide Area Network (MTWAN) to a number of major fleet units.

• Phase 4 (unapproved) will enhance and modernise the communications capability of the

ANZAC Class of ships.

SEA 1442 Phase 5 Maritime Communication Modernisation

Scope

SEA 1442 Phase 5 will enhance and modernise the communications capability of the Canberra Class LHD and

Hobart Class Destroyers and other legacy platforms. This will include:

• Modernisation and improvements to the technology for these platforms baselined on MTWAN capability

being delivered by SEA 1442 Phases 3 & 4; and

• Provision of communications systems improvements.

Planned Schedule




Point of Contact

Capability Development Group: Project Manager Communications Sea

Phone: (02) 6265 5202



41/48

41


SEA 4000 Phase 4 Air Warfare Destroyer (AWD) –


SEA 4000

Background

SEA 4000 is a multi-phased project to acquire a multi-role surface combatant with a strong emphasis on above-

water warfare. The Hobart Class Destroyer acquired through the Air Warfare Destroyer (AWD) Project, will

incorporate an integrated combat system, which uses the United States Navy (USN) Aegis Combat System,

and a platform system based upon the design of the Spanish Armada’s F-104 warship, with specified changesfrom the F-105 baseline.

Previous phases were:

• Phase 0 (complete): Capability studies undertaken between 2001 and 2002.

• Phase 1 (complete): Project definition between 2002 and 2005.

• Phase 2 (complete): Project design phase from 2005 to 2007.

• Phase 3 (approved): Acquisition and build of three Hobart Class Destroyers and associated logistic

support. Construction of the lead ship commenced in March 2010 and the forecast delivery is 2015.

• Phase 3.2 (approved): Standard Missile-2 (SM-2) conversion and upgrade.

• Phase 3.3 (unapproved): Combat System Ship Qualification Trials for three Hobart Class Destroyers.

Phase 4 provides for the acquisition of a maritime-based land-attack cruise missile capability for the Hobart

Class Destroyers that will provide the Government with additional options to conduct long-range precision

strike operations against hardened, defended and difficult to access targets, while minimising the exposure

of ADF platforms and personnel to attack by enemy forces. The systems will complement the maritime-based

land-attack cruise missile capability proposed for the Future Submarine (SEA 1000 Phase 4) and

Future Frigate (SEA 5000 Phase 3).



42/48

42



SEA 4000 Phase 4 Air Warfare Destroyer (AWD) –


SEA 4000 Phase 4 Air Warfare Destroyer (AWD) - Maritime BasedStrategic Strike

Scope

This phase will provide for the acquisition of maritime-based land-attack cruise missiles, weapon control and

mission planning sub-systems for the Hobart Class Destroyer, and an integrated logistics support system

including documentation, training and support equipment. The systems will be interoperable with the broader

ADF Network Centric Warfare (NCW), Joint Fires and Targeting capabilities and will complement the common

land strike weapons systems proposed for the Future Submarines (SEA 1000 Phase 4) and Future Frigates

(SEA 5000 Phase 3).

Planned Schedule




Point of Contact


Phone: (02) 6265 4031


43/48

43


SEA 5000 Phase 1 Future Frigate

SEA 5000

Background

The 2009 White Paper stated that a fleet of eight new Future Frigates will be acquired. They will be larger

than the ANZAC Class and be designed and equipped with a strong emphasis on submarine detection and

response options and capable of independent and task group operations. They will be equipped with an

integrated sonar suite that includes a long-range active towed-array sonar, a maritime-based land-attack cruisemissile capability, and be able to embark a combination of naval combat helicopters and maritime Unmanned

Aerial Vehicles (UAV).

SEA 5000 Phase 1 Future Frigate

Scope

This phase will focus on project definition, design and building of a multi-role Future Frigate.

Planned Schedule




Point of Contact

Capability Development Group: Deputy Director Surface Combatants

Phone: (02) 6265 5086



44/48

44


SEA 5000 Phase 2 Future Frigate - Weapons

SEA 5000

Background

The 2009 White Paper stated that a fleet of eight new Future Frigates will be acquired. They will be larger

than the ANZAC Class and be designed and equipped with a strong emphasis on submarine detection and

response options and capable of independent and task group operations.

SEA 5000 Phase 2 Future Frigate - Weapons

Scope

This phase of the project will provide the inventory of the above water and underwater weapons for the

Future Frigate including weapons required for test and evaluation, training, tactical development and reserve

stockholdings. This phase specifically excludes acquisition of the maritime-based land attack cruise missile

capability which will be acquired through SEA 5000 Phase 3.

Planned Schedule




Point of Contact

Capability Development Group: Deputy Director Surface Combatants

Phone: (02) 6265 5086



45/48

45


SEA 5000 Phase 3 Future Frigate - Maritime


SEA 5000

Background

The 2009 White Paper stated that a fleet of eight new Future Frigates will be acquired. They are intended to be

designed and equipped with a strong emphasis on submarine detection and response options and capable

of independent and task group operations.

As stated in the 2009 White Paper, the incorporation of a land attack cruise missile capability will be integral to

the design and construction of the Future Frigate.

SEA 5000 Phase 3 Future Frigate - Maritime Based Strategic Strike

Scope

This phase will provide for the acquisition of maritime-based land-attack cruise missile, weapon control

and mission planning sub-systems for the Future Frigate. An integrated logistics support system including

documentation, training and support equipment will be provided. The systems will complement the common

land attack strike weapons systems proposed for the Future Submarines (SEA 1000 Phase 4) and Air Warfare

Destroyer (SEA 4000 Phase 4).

Planned Schedule



Initial Operating Capacity FY 2027-28 to FY 2029-30

Point of Contact


Phone: (02) 6265 4031



46/48


47/48


48/48

WEBSITE

www.defence.gov.au/header/publications.htm

DCG2012

australian dod capability guide 2012

Documents