PLANERSAUTO DOUBLE SURFACE

GY SERIES

Simple, affordable surfacing solutions

6161 Mt. Hope Road, Apple Creek, OH 44606

330.778.0020

2

GY-610SS. B20.1000.1320

Additional emergency switch at outfeed/rear of planer provides quick access to shut machine down. Emergency mushroom button is also standard on front control panel.

Central lubricating arrangement, lubrication covering all head pulleys and around clamp.

1 2LUBRICATING ARRANGEMENT REAR EMERGENCY STOP

CONTROL

3

All electrical controls are neatly positioned in a remote dust-proof cabinet. Stonewood Industrial Machinery employs highest technology available in all electrical components. All components are UL approved for U.S. installations. Delta start up allows soft start of all cutterhead and feed motors.

SYNCHRONIZED TRANSMISSION SYSTEM

CONTROLS CABINET

The force cardan shaft transmission, the synchronism is good, dynamic output 100% efficiency transmissions (patented article]

The first half plate adjustment height demonstrated by the numeral, legible, accurate

CARDAN SHAFT TRANSMISSION SYSTEM

FIRST PLATE ADJUSTMENT

43

5

MODEL GY-61OSS GY-82O GY-1OOO GY-1320 Max. working width 24"(610mm) 32"(820mm) 39"(1000mm) 52"(1320mm)

Max. working thickness 8"(200mm) 8"(200mm) 8"(200mm) 8"(200mm)

Min.working thickness 3/8"(9mm) 3/8"(9mm) 3/8"(9mm) 3/8"(9mm)

Min.working length 14"(360mm) 14"(360mm) 14"(360mm) 14"(360mm)

Cutterhead Diameter 0150 mm 0150 mm 0175 mm 0175 mm

Composition of knives Solid Carbide Solid Carbide Solid Carbide Solid Carbide

Knife style 30 x 12 x 2.5 30 x 12 x 2.5 30 x 12 x 2.5 30 x 12 x 2.5

Cutterhead speed 4200 rpm 4200 rpm 4200 rpm 4200 rpm

Feeding speed 33~131 ft./min. (standard) 20-82 ft./min. (standard) 20-82 ft./min. (standard) 20-82 ft./min. (standard)

Upper cutterhead motor 40HP/HD Series 50HP 50HP/HD Series 60HP HD Series 60, 75HP 60HP/HD Series 75HP

Bottom cutterhead motor 40HP/HD Series 40HP 40HP /HD Series 50HP 40HP/HD Series 50, 60HP 50HP /HD Series 60HP

Feed drive motor 10 HP + 15 HP inverter lOHP + 15HP inverter 15HP + 20HP inverter 15HP + 20HP inverter

Elevation drive motor 2 HP 2 HP 2 HP 2 HP

Machine dimensions (LxWxH–inches) 118 x 67 x 67 118 x 67 x 67 120 x 850 x 67 120 x 97 x 67

Packing dimensions(LxWxH–inches) 122 x 73 x 72 124 x 81 x 77 124 x 91 x 72 124 x 106 x 72

N.W /G.W 12787 lbs. / 13669 lbs. 18078 lbs. / 18960 lbs. 20283 lbs. / 21164 lbs. 22928 lbs. / 24030 lbs.

Digital control for setting working pieces thickness Standard Standard Standard Standard

CFM Dust requirement 4200 CFM 4200 CFM 4200 CFM 4200 CFM

GY-610SS. 820.1000.1320

High Speed