autocad tutorial, tips and best practices _ cad notes

Download AutoCAD Tutorial, Tips and Best Practices _ CAD Notes

If you can't read please download the document

Upload: alejo-consultor

Post on 21-Oct-2015

123 views

Category:

Documents


2 download

DESCRIPTION

TIPS DE AUTOCAD

TRANSCRIPT

  • 23/01/14 AutoCAD tutorial, tips and best practices | CAD Notes

    www.cad-notes.com/contents/autocad-articles/ 1/10

    CAD Notes

    AutoCAD Articles

    AutoCAD tutorial series: for beginners guide

    This is a AutoCAD tutorial series for beginners. We are discussing the concept, so it will not be a step-by-

    step tutorial. However, this might be useful especially if you learn by yourself.

    1. Introduction to AutoCAD: the Interface

    2. The Basic of Using AutoCAD Drawing Tools

    3. Using AutoCAD Navigation Tools

    4. Using Template and Setting Your Unit

    5. AutoCAD Precise Input: Specifying Point Coordinate

    6. AutoCAD Precise Input: Drafting Tools

    7. Exercise: Coordinate Input and Drafting Tools

    8. Modifying AutoCAD Drawing Objects

    AUTOCAD ARTICLES MICROSTATION ARTICLES REVIT ARTICLES INVENTOR ARTICLES

    AUTOLISP ARTICLES EMAIL NEWSLETTER

    FOLLOW CADNOTES HOME E-BOOKS TRAINING VIDEO

    http://www.cad-notes.com/http://cad-notes.com/2011/03/autocad-and-revit-2012-are-here/autocad2012-png/http://www.cad-notes.com/introduction-to-autocad-the-interface/http://www.cad-notes.com/the-basic-of-using-autocad-drawing-tools/http://www.cad-notes.com/using-autocad-navigation-tools/http://www.cad-notes.com/using-template-and-setting-your-unit/http://www.cad-notes.com/autocad-precise-input-specifying-point-coordinate/http://www.cad-notes.com/autocad-precise-input-drafting-tools/http://www.cad-notes.com/exercise-coordinate-input-drafting-tools/http://www.cad-notes.com/modifying-autocad-drawing-objects/http://www.cad-notes.com/contents/autocad-articles/http://www.cad-notes.com/contents/microstation-articles/http://www.cad-notes.com/contents/revit-articles/http://www.cad-notes.com/contents/inventor-articles/http://www.cad-notes.com/contents/autolisp-articles/http://www.cad-notes.com/email-newsletter/http://www.cad-notes.com/http://www.cad-notes.com/e-store/http://www.cad-notes.com/e-store/training-video/
  • 23/01/14 AutoCAD tutorial, tips and best practices | CAD Notes

    www.cad-notes.com/contents/autocad-articles/ 2/10

    9. Controlling UCS for Angled Drawing and Local Coordinates

    AutoCAD Whats New: New key features in AutoCAD

    If you want to catchup with new key features in AutoCAD, find them here. Very useful if you are already

    familiar with AutoCAD, and want to update your knowledge.

    1. Whats new in AutoCAD: the Interface

    2. Whats new in AutoCAD: drawing and drafting tools

    3. Whats new in AutoCAD: Annotations

    4. Whats new in AutoCAD: Block and References

    5. Whats new in AutoCAD 2013: Interface

    6. Whats new in AutoCAD 2013: Object modification

    7. Whats new in AutoCAD 2013: Working with files

    8. Whats new in AutoCAD 2013: Autodesk 360 integration

    9. Whats new in AutoCAD 2013: Create section and detail views

    10. Whats new in AutoCAD 2013: New features roundup

    11. Whats new in AutoCAD: a veteran guide

    12. Whats New in AutoCAD 2014: The Interface (1)

    13. Whats new in AutoCAD 2014: System Enhancements

    14. Whats new in AutoCAD 2014: Drawing and annotation enhancements

    Other AutoCAD Tutorials

    More AutoCAD tutorials. Here you will learn how to use some key features in AutoCAD.

    1. Dynamic Block Tutorial #1: Creating Wall

    2. Dynamic Block Tutorial #2: Creating Column

    3. Dynamic Block Tutorial #3: Door

    4. Dynamic Block Tutorial #4: Adding More Actions

    5. Creating Your Own AutoCAD Palette

    6. Preparing Your AutoCAD Template

    7. Maintaining Your CAD Standard

    8. Summary: The Magic of Defining Your Own Workflow

    9. Creating Schedule from Your AutoCAD Drawing

    10. Introduction to Annotation Scale

    11. Controlling Annotation Scale Further

    12. Dynamic Block Tutorial #5: Controlling Visibility

    13. Understanding Geometric Constraint

    14. Understanding Dimensional Constraint

    15. Using Parametric Features in Dynamic Block

    16. Introduction to AutoCAD: the Interface

    ADVERTISEMENT

    FEATURED

    6KDULQJILOHVDQGGHVLJQVZLWK$XWRGHVN

    AUTODESK OFFICIAL PRESS WRITE FOR CAD NOTES

    CONTACT ABOUT

    http://www.cad-notes.com/controlling-ucs-for-angled-drawing-and-local-coordinates/http://www.cad-notes.com/whats-new-in-autocad-the-interface/http://www.cad-notes.com/whats-new-in-autocad-drawing-and-drafting-tools/http://www.cad-notes.com/whats-new-in-autocad-annotations/http://www.cad-notes.com/whats-new-in-autocad-block-and-references/http://www.cad-notes.com/autocad-2013-interface/http://www.cad-notes.com/autocad-2013-object-modification/http://www.cad-notes.com/autocad-2013-working-with-files/http://www.cad-notes.com/autocad-2013-autodesk-360-integration/http://www.cad-notes.com/autocad-2013-create-section-and-detail-views/http://www.cad-notes.com/autocad-2013-new-features-roundup/http://www.cad-notes.com/whats-new-in-autocad-a-veteran-guide/http://www.cad-notes.com/autocad-2014-command-line/http://www.cad-notes.com/autocad-2014-system-enhancements/http://www.cad-notes.com/autocad-2014-drawing-annotation/http://www.cad-notes.com/dynamic-block-tutorial-1-creating-wall/http://www.cad-notes.com/dynamic-block-tutorial-2-creating-column/http://www.cad-notes.com/dynamic-block-tutorial-3-creating-door/http://www.cad-notes.com/dynamic-block-tutorial-4-adding-more-actions/http://www.cad-notes.com/creating-your-own-autocad-palette/http://www.cad-notes.com/preparing-your-autocad-template/http://www.cad-notes.com/maintaining-your-cad-standard/http://www.cad-notes.com/summary-the-magic-of-defining-your-own-workflow/http://www.cad-notes.com/creating-schedule-from-your-autocad-drawing/http://www.cad-notes.com/introduction-to-annotation-scale/http://www.cad-notes.com/controlling-annotation-scale-further/http://www.cad-notes.com/dynamic-block-tutorial-5-controlling-visibility/http://www.cad-notes.com/understanding-geometric-constraint/http://www.cad-notes.com/understanding-dimensional-constraint/http://www.cad-notes.com/using-parametric-features-in-dynamic-block/http://www.cad-notes.com/introduction-to-autocad-the-interface/http://www.cad-notes.com/email-newsletter/http://facebook.com/CadNoteshttp://plus.google.com/b/101460909939563924715/101460909939563924715/about/http://twitter.com/CADnoteshttp://youtube.com/cadnoteshttp://www.cad-notes.com/sharing-files-and-designs-with-autodesk-360/http://www.cad-notes.com/sharing-files-and-designs-with-autodesk-360/http://www.cad-notes.com/e-store/autodesk-official-training-guides/http://www.cad-notes.com/write-for-cad-notes/http://www.cad-notes.com/contact/http://www.cad-notes.com/about/
  • 23/01/14 AutoCAD tutorial, tips and best practices | CAD Notes

    www.cad-notes.com/contents/autocad-articles/ 3/10

    17. The Basic of Using AutoCAD Drawing Tools

    18. Using AutoCAD Navigation Tools

    19. Using Template and Setting Your Unit

    20. AutoCAD Precise Input: Specifying Point Coordinate

    21. AutoCAD Precise Input: Drafting Tools

    22. Exercise: Coordinate Input and Drafting Tools

    23. Modifying AutoCAD Drawing Objects

    24. Controlling UCS for Angled Drawing and Local Coordinates

    25. Using named plot style table: less style to manage

    26. How to: export custom rendering materials

    27. Do you know how to use snap parallel?

    28. Book review: AutoCAD and AutoCAD LT 2012 Bible

    29. linking Excel external data to AutoCAD data extraction

    30. AutoCAD and AutoCAD LT Sheet Set video

    31. Exploring AutoCAD CUI: introduction (1)

    32. Exploring AutoCAD CUI: Creating a command in tab (part 2)

    33. Exploring AutoCAD CUI: working with ribbon (part 3)

    34. Exploring AutoCAD CUI: Working with toolbar and menu (part 4)

    35. How to Automate AutoCAD with command Macros

    36. Exploring AutoCAD CUI: 5 more things you can do with CUI (part 5)

    37. AutoCAD customization: 5 articles to learn about CUI

    38. How to: add custom pattern to AutoCAD

    39. Autodesk learning materials, get them for free!

    40. Autodesk Official Training Guides: recommended books for learning

    41. Training video: having personal instructor anytime, anywhere

    42. 3 ways to move AutoCAD objects to other layer

    43. 4 ways to modify block definition

    44. AutoCAD dynamic block tutorial series

    45. More AutoCAD specific skills training video

    46. How to extract block attributes in AutoCAD LT

    AutoCAD troubleshoot: From using AutoCAD toInstallation

    Have problem with AutoCAD? I logged some issues that I found here. See if these troubleshooting can help

    you.

    1. When AutoCAD is not Accurate

    2. File Dialog Box is Missing

    3. Why I cant Use Formula in xls Created by Data Extraction?

    4. Defpoints Layer

    http://www.cad-notes.com/the-basic-of-using-autocad-drawing-tools/http://www.cad-notes.com/using-autocad-navigation-tools/http://www.cad-notes.com/using-template-and-setting-your-unit/http://www.cad-notes.com/autocad-precise-input-specifying-point-coordinate/http://www.cad-notes.com/autocad-precise-input-drafting-tools/http://www.cad-notes.com/exercise-coordinate-input-drafting-tools/http://www.cad-notes.com/modifying-autocad-drawing-objects/http://www.cad-notes.com/controlling-ucs-for-angled-drawing-and-local-coordinates/http://www.cad-notes.com/using-named-plot-style-table-less-style-to-manage/http://www.cad-notes.com/how-to-export-custom-rendering-materials/http://www.cad-notes.com/do-you-know-how-to-use-snap-parallel/http://www.cad-notes.com/book-review-autocad-and-autocad-lt-2012-bible/http://www.cad-notes.com/linking-excel-external-data-to-autocad-data-extraction/http://www.cad-notes.com/autocad-and-autocad-lt-sheet-set-video/http://www.cad-notes.com/exploring-autocad-cui-introduction-1/http://www.cad-notes.com/exploring-autocad-cui-creating-a-command-part-2/http://www.cad-notes.com/exploring-autocad-cui-working-with-ribbon-part-3/http://www.cad-notes.com/exploring-autocad-cui-working-with-toolbar-and-menu/http://www.cad-notes.com/how-to-automate-autocad-with-command-macros/http://www.cad-notes.com/5-more-things-you-can-do-with-cui/http://www.cad-notes.com/5-autocad-customization-cui-tutorial/http://www.cad-notes.com/add-custom-pattern-to-autocad/http://www.cad-notes.com/free-autodesk-learning-training-materials/http://www.cad-notes.com/autodesk-official-training-guides/http://www.cad-notes.com/training-video-having-personal-instructor-anytime-anywhere/http://www.cad-notes.com/3-ways-to-move-autocad-objects-to-other-layer/http://www.cad-notes.com/4-ways-to-modify-block-definition/http://www.cad-notes.com/autocad-dynamic-block-tutorial-series/http://www.cad-notes.com/more-autocad-specific-skills-training-video/http://www.cad-notes.com/how-to-extract-block-attributes-in-autocad-lt/http://www.cad-notes.com/troubleshoot-when-autocad-is-not-accurate/http://www.cad-notes.com/file-dialog-box-is-missing/http://www.cad-notes.com/why-i-can%e2%80%99t-use-formula-in-xls-created-by-data-extraction/http://www.cad-notes.com/defpoints-layer/
  • 23/01/14 AutoCAD tutorial, tips and best practices | CAD Notes

    www.cad-notes.com/contents/autocad-articles/ 4/10

    5. What Caused Fatal Error Messages in AutoCAD?

    6. When Its Freeze, Its Not Always AutoCAD Fault!

    7. AutoCAD Performs Incorrect Calculation

    8. Troubleshoot: Block Attributes Wont stretched

    9. AutoCAD Plotting Problem

    10. AutoCAD Installation Troubleshoot

    11. AutoCAD Accuracy Issue: How Do You Deal With It?

    12. AutoCAD dimensions are Missing in Other Viewport: How to Fix It?

    13. I cant select objects then press del in AutoCAD!

    14. How to install express tools after AutoCAD is installed

    15. Some viewports turn off when reach certain numbers of viewports

    16. Up and Ready: Boldly install, configure, & deploy Autodesk software

    17. Working with shared contents: eliminating slow network performance

    18. Is your computer free from AutoCAD/Medre.A Malware?

    19. How to: disable graphic card hardware acceleration

    20. Why reinstalling wont fix your AutoCAD problem

    21. Troubleshoot: AutoCAD hangs on start

    22. Unable to Install AutoCAD because its already installed

    23. How to add AutoCAD DWG to PDF plotter

    24. How to install AutoCAD 2014 without Autodesk 360

    25. My dimensions show incorrect value in viewport layout!

    26. Layer states are not saved in an AutoCAD session

    27. How to set default program to open DWG file

    28. How to uninstall updates or service packs

    29. AutoCAD properties palette doesnt show objects properties

    AutoCAD Tips: Some productivity tips from CADNotes

    Learn to use AutoCAD is easy. But become productive in using AutoCAD is another thing. See some tips

    here to increase your productivity.

    1. Creating Your Own AutoCAD Line Type

    2. Quickly create palettes from block libraries

    3. 6 SHIFT Key Combination You Might Not Know

    4. AutoCAD Startup Dialog Box

    5. AutoCAD Match Properties Settings

    6. AutoCAD Layer Walk

    7. 4 Reasons to Love AutoCAD Dynamic Input

    8. Pack Your Files With eTransmit

    9. Optimize Your Palette Placement

    http://www.cad-notes.com/what-caused-fatal-error-messages-in-autocad/http://www.cad-notes.com/when-it%e2%80%99s-freeze-it%e2%80%99s-not-always-autocad-fault/http://www.cad-notes.com/autocad-performs-incorrect-calculation/http://www.cad-notes.com/troubleshoot-block-attributes-wont-stretched/http://www.cad-notes.com/autocad-plotting-problem/http://www.cad-notes.com/autocad-installation-troubleshoot/http://www.cad-notes.com/autocad-accuracy-issue-how-do-you-deal-with-it/http://www.cad-notes.com/dimensions-are-missing-in-other-viewport-how-to-fix-it/http://www.cad-notes.com/i-cant-select-objects-then-press-del-in-autocad/http://www.cad-notes.com/how-to-install-express-tools-after-autocad-is-installed/http://www.cad-notes.com/some-viewports-turn-off-when-reach-certain-numbers-of-viewports/http://www.cad-notes.com/up-and-ready-boldly-install-configure-deploy-autodesk-software/http://www.cad-notes.com/working-with-shared-contents-eliminating-slow-network-performance/http://www.cad-notes.com/free-your-computer-from-autocadmedre-a-malware/http://www.cad-notes.com/disable-graphic-hardware-acceleration/http://www.cad-notes.com/why-reinstalling-wont-fix-your-autocad-problem/http://www.cad-notes.com/troubleshoot-autocad-hangs-on-start/http://www.cad-notes.com/unable-to-install-autocad-because-its-already-installed/http://www.cad-notes.com/how-to-add-autocad-dwg-to-pdf-plotter/http://www.cad-notes.com/install-autocad-2014-without-autodesk-360/http://www.cad-notes.com/dimensions-show-incorrect-value-in-viewport-layout/http://www.cad-notes.com/layer-states-are-not-saved-in-an-autocad-session/http://www.cad-notes.com/set-default-program-to-open-dwg-file/http://www.cad-notes.com/how-to-uninstall-updates-or-service-packs/http://www.cad-notes.com/autocad-properties-palette-doesnt-show-objects-properties/http://www.cad-notes.com/creating-your-own-autocad-line-type/http://www.cad-notes.com/easy-creation-of-pallete-from-block-libraries/http://www.cad-notes.com/6-shift-key-combination-you-might-not-know/http://www.cad-notes.com/autocad-startup-dialog-box/http://www.cad-notes.com/autocad-match-properties-settings/http://www.cad-notes.com/autocad-layer-walk/http://www.cad-notes.com/4-reasons-to-love-autocad-dynamic-input/http://www.cad-notes.com/pack-your-files-with-etransmit/http://www.cad-notes.com/optimize-your-palette-placement/
  • 23/01/14 AutoCAD tutorial, tips and best practices | CAD Notes

    www.cad-notes.com/contents/autocad-articles/ 5/10

    10. 10 Features to Boost Your AutoCAD Productivity

    11. Create a Report Table with Data Extraction

    12. Enable Object Snap to Hatch

    13. AutoCAD Solid History

    14. Creating Angular Dimension Larger than 180 deg

    15. Use BURST for block with attributes instead of Explode!

    16. How to: Cycle AutoCAD commands

    17. 10+ Ways to Use AutoCAD Object Selection

    18. How to: Set a previous file version as default

    19. Why I cant Use Formula in xls Created by Data Extraction?

    20. A Simple Guide: 12 steps to Master AutoCAD

    21. Using DWF and PDF as Underlay

    22. How to: Get Hi Res Image from AutoCAD?

    23. Creating Sketch From Your AutoCAD Drawing

    24. Set All Your Objects Properties Back to ByLayer

    25. Layer 0, ByLayer and ByBlock

    26. How to: Modify Objects With Non-Uniform Scale

    27. Creating New Command in AutoCAD

    28. Adding Command to Your Right Click

    29. Block vs XREF

    30. Where Can I See AutoCAD Command Alias List?

    31. 5 Steps Preparing Your AutoCAD Plot

    32. Ribbon Shortcut Key on Autodesk Products

    33. How to: See Your Complete AutoCAD System Variable List

    34. Using Info Center to Notify RSS Update

    35. Isometric Drawing in AutoCAD

    36. AutoCAD Isometric Text and Dimension

    37. Isometric Dimension Arrow

    38. Cool way to Open Your Drawing: Drag n Drop!

    39. Creating Different Drawing Representation

    40. SubObject Selection Filter

    41. AutoCAD 2010 Sticky Ribbon Panels

    42. DWG TrueView: Open and Save to Any Version of DWG

    43. 10 AutoCAD Layer Tools (You Might) Forgotten

    44. How to: Reference Objects to File/URL in AutoCAD

    45. AutoCAD Quick Select

    46. 10 AutoCAD Ribbon Tips You Should Know

    47. How to: Label Coordinate in AutoCAD

    48. Maximize Your Screen and Speed Up with Ribbon Shortcut

    49. Using AutoCAD Filter

    50. AutoCAD Contextual Ribbon Tab

    51. Using Lookup Table in Dynamic Block

    http://www.cad-notes.com/10-features-to-boost-your-autocad-productivity/http://www.cad-notes.com/create-a-report-table-with-data-extraction/http://www.cad-notes.com/enable-object-snap-to-hatch/http://www.cad-notes.com/autocad-solid-history/http://www.cad-notes.com/creating-angular-dimension-larger-than-180-deg/http://www.cad-notes.com/use-burst-for-block-with-attributes-instead-of-explode/http://www.cad-notes.com/how-to-cycle-autocad-commands/http://www.cad-notes.com/10-ways-to-use-autocad-object-selection/http://www.cad-notes.com/how-to-set-a-previous-file-version-as-default/http://www.cad-notes.com/why-i-can%e2%80%99t-use-formula-in-xls-created-by-data-extraction/http://www.cad-notes.com/a-simple-guide-12-steps-to-mastering-autocad/http://www.cad-notes.com/using-dwf-and-pdf-as-underlay/http://www.cad-notes.com/how-to-get-hi-res-image-from-autocad/http://www.cad-notes.com/creating-sketch-from-your-autocad-drawing/http://www.cad-notes.com/set-all-your-objects-properties-back-to-bylayer/http://www.cad-notes.com/layer-0-bylayer-and-byblock/http://www.cad-notes.com/how-to-modify-objects-with-non-uniform-scale/http://www.cad-notes.com/creating-new-command-in-autocad/http://www.cad-notes.com/adding-command-to-your-right-click/http://www.cad-notes.com/block-vs-xref/http://www.cad-notes.com/where-can-i-see-autocad-command-alias-list/http://www.cad-notes.com/5-steps-preparing-your-autocad-plot/http://www.cad-notes.com/ribbon-shortcut-key-on-autodesk-products/http://www.cad-notes.com/how-to-see-your-complete-autocad-system-variable-list/http://www.cad-notes.com/using-info-center-to-notify-rss-update/http://www.cad-notes.com/isometric-drawing-in-autocad/http://www.cad-notes.com/autocad-isometric-text-and-dimension/http://www.cad-notes.com/isometric-dimension-arrow/http://www.cad-notes.com/cool-way-to-open-your-drawing-drag-n-drop/http://www.cad-notes.com/creating-different-drawing-representation/http://www.cad-notes.com/subobject-selection-filter/http://www.cad-notes.com/autocad-2010-sticky-ribbon-panels/http://www.cad-notes.com/dwg-trueview-open-and-save-to-any-version-of-dwg/http://www.cad-notes.com/10-autocad-layer-tools-you-might-forgotten/http://www.cad-notes.com/how-to-reference-objects-to-fileurl-in-autocad/http://www.cad-notes.com/autocad-quick-select/http://www.cad-notes.com/10-autocad-ribbon-tips-you-should-know/http://www.cad-notes.com/how-to-label-coordinate-in-autocad/http://www.cad-notes.com/maximize-your-screen-and-speed-up-with-ribbon-shortcut/http://www.cad-notes.com/using-autocad-filter/http://www.cad-notes.com/autocad-contextual-ribbon-tab/http://www.cad-notes.com/using-lookup-table-in-dynamic-block/
  • 23/01/14 AutoCAD tutorial, tips and best practices | CAD Notes

    www.cad-notes.com/contents/autocad-articles/ 6/10

    52. Reporting Multiple Coordinates in A Block using Attribute Extraction

    53. Dynamic Block Action vs Dynamic Block Parameters

    54. Selecting Object Like in Windows Explorer

    55. Shaan Hurleys Best of AutoCAD 2007 to AutoCAD 2010

    56. Autodesk Project Butterfly

    57. Troubleshoot: Block Attributes Wont stretched

    58. Can I Render Wireframe Image from AutoCAD?

    59. 25 Readers Most Favorite AutoCAD Tips

    60. Community Command for AutoCAD

    61. AutoCAD Tips Updates

    62. How to: Set Local Help File as Default in 2011 Version

    63. How to: Draw an Arc with a Specific Arc Length?

    64. Using XREF: Attachment vs Overlay

    65. Controlling Linetype Scale is as Easy as 1,2,3!

    66. Enforcing Dimension Styles Across Your Drawings

    67. The Best, the Rest, the Rare: 100 AutoCAD Tips You Should Know

    68. Saved Views: Quickly switch between view configuration

    69. Backup and Restore AutoCAD System Variables

    70. How do You Secure Your Design Files?

    71. Using Multiple Hyperlinks with Block Attributes

    72. How to: Keep Attributes at Dynamic Block Center

    73. How to: Select All Horizontal or Vertical Lines in a Drawing

    74. 4 Viewport Tips: Configurations, Irregular, Clip, and Scale

    75. Need Batch Plot Your AutoCAD Drawings to Several Plotters at Once?

    76. How to: Hide some parts of blocks

    77. Quick and Dirty Tip: Resolving AutoCAD XREF Path

    78. Preventing AutoCAD Ribbon Panels to Collapse

    79. Using AutoCAD Action Recorder to View Specific Area Quickly

    80. Simplify AutoCAD Layer Manager List with Layer Filter

    81. How to Convert AutoCAD Drawing Units from One to Another?

    82. Hide Unnecessary AutoCAD Dimension Input Fields

    83. Using AutoLISP Program to label point coordinate

    84. Labeling Coordinate with Easting and Northing in AutoCAD

    85. Showing Common AutoCAD Information in Title Block

    86. How Can We Protect AutoCAD Tool Palettes?

    87. Masking with AutoCAD Hatch

    88. Annotative Block Cant be Dragged Because of Alignment Parameter

    89. AutoCAD Forgotten Tool: Pan by Points

    90. Disabling F1 Key

    91. Find mid point between two points in AutoCAD

    92. How to: remove hatch contextual tab ribbon

    93. Control blipmode in AutoCAD 2012

    http://www.cad-notes.com/reporting-multiple-coordinates-in-a-block-using-attribute-extraction/http://www.cad-notes.com/dynamic-block-action-vs-dynamic-block-parameters/http://www.cad-notes.com/selecting-object-like-in-windows-explorer/http://www.cad-notes.com/shaan-hurley%e2%80%99s-best-of-autocad-2007-to-autocad-2010/http://www.cad-notes.com/autodesk-project-butterfly/http://www.cad-notes.com/troubleshoot-block-attributes-wont-stretched/http://www.cad-notes.com/can-i-render-wireframe-image-from-autocad/http://www.cad-notes.com/25-readers-most-favorite-autocad-tips/http://www.cad-notes.com/community-command-for-autocad/http://www.cad-notes.com/autocad-tips-updates/http://www.cad-notes.com/how-to-set-local-help-file-as-default-in-2011-version/http://www.cad-notes.com/how-to-draw-an-arc-with-a-specific-arc-length/http://www.cad-notes.com/using-xref-attachment-vs-overlay/http://www.cad-notes.com/controlling-linetype-scale-is-as-easy-as-123/http://www.cad-notes.com/enforcing-dimension-styles-across-your-drawings/http://www.cad-notes.com/100-autocad-tips-you-should-know/http://www.cad-notes.com/quickly-change-autocad-views-using-saved-views/http://www.cad-notes.com/backup-and-restore-autocad-system-variables/http://www.cad-notes.com/how-do-you-secure-your-design-files/http://www.cad-notes.com/using-multiple-hyperlinks-with-block-attributes/http://www.cad-notes.com/how-to-keep-attributes-at-dynamic-block-center/http://www.cad-notes.com/how-to-select-all-horizontal-or-vertical-lines-in-a-drawing/http://www.cad-notes.com/4-viewport-tips-configurations-irregular-clip-and-scale/http://www.cad-notes.com/need-batch-plot-your-autocad-drawings-to-several-plotters-at-once/http://www.cad-notes.com/how-to-hide-some-parts-of-blocks/http://www.cad-notes.com/quick-and-dirty-tip-resolving-autocad-xref-path/http://www.cad-notes.com/preventing-autocad-ribbon-panels-to-collapse/http://www.cad-notes.com/using-autocad-action-recorder-to-view-specific-area-quickly/http://www.cad-notes.com/simplify-autocad-layer-manager-list-with-layer-filter/http://www.cad-notes.com/how-to-convert-autocad-drawing-units-from-one-to-another/http://www.cad-notes.com/hide-unnecessary-autocad-dimension-input-fields/http://www.cad-notes.com/using-autolisp-to-label-point-coordinate/http://www.cad-notes.com/labeling-coordinate-with-easting-and-northing-in-autocad/http://www.cad-notes.com/showing-common-autocad-information-in-title-block/http://www.cad-notes.com/how-can-we-protect-autocad-tool-palettes/http://www.cad-notes.com/masking-with-autocad-hatch/http://www.cad-notes.com/annotative-block-cant-be-dragged-because-of-alignment-parameter/http://www.cad-notes.com/autocad-forgotten-tool-pan-by-points/http://www.cad-notes.com/disabling-f1-key/http://www.cad-notes.com/find-mid-point-between-two-points-in-autocad/http://www.cad-notes.com/how-to-remove-hatch-contextual-tab-ribbon/http://www.cad-notes.com/control-blipmode-in-autocad-2012/
  • 23/01/14 AutoCAD tutorial, tips and best practices | CAD Notes

    www.cad-notes.com/contents/autocad-articles/ 7/10

    94. AutoCAD tip: remove alternate unit bracket in dimension

    95. How to: add action recorder macro to tool palettes

    96. How to use the AutoCAD status line to provide real time reporting

    97. Insert block without being asked to input value

    98. Do you know that you can plot using TrueView?

    99. Enable block attribute dialog during insertion

    100. Autodesk Seek: get real world BIM models for free!

    101. Disable shift+mid button as transparent orbit

    102. AutoCAD tip: Turning off multifunctional grips

    103. How to: embed image to AutoCAD drawing

    104. AutoCAD tip: Text Alignment Technique

    105. AutoCAD tip: exaggerating drawing scale

    106. AutoCAD 2012: Legacy Snap to Grid

    107. AutoCAD tip: Working with different measurement unit

    108. Brians Tip: Why should we use template?

    109. How to: Publish AutoCAD layouts to multiple pdf file with single sheet

    110. AutoCAD tips: quickly switching between drawings

    111. How to load AutoLISP program

    112. Plugins to switch between AutoCAD drawings quickly

    113. How to find and replace text in AutoCAD

    114. AutoCAD tip: renumber text automatically

    115. When Rotating objects, use NEWS

    116. Using AutoCAD UNDO: Its more than just one step back

    117. Working with shared contents: eliminating slow network performance

    118. AutoCAD Block Cant be Inserted Using Non-uniform Scale

    119. Command line only express tools: Have you used them?

    120. Eleven Killer Tool palette Macros for working with AutoCAD Viewports

    121. The killer tool palette macros, download it here!

    122. Set default system variables in acaddoc.lsp

    123. 3 Construction or Reference Objects We Rarely Use

    124. How to: trim and copy objects within a boundary

    125. AutoCAD tip: rotate multiple texts at once to readable orientation

    126. What will went wrong if I use imperial template for my metric drawing?

    127. Learn how to write command scripts for AutoCAD and automate your plotting

    128. How to Automate AutoCAD with command Macros

    129. Load AutoCAD with defined profile and template

    130. Another AutoCAD accuracy issue problem

    131. Using multiple layer states in multiple layouts

    132. AutoCAD 2013: how to choose which customization to sync

    133. How to show AutoCAD hidden messages back?

    134. How to add AutoCAD layer information in PDF file?

    135. Keep AutoCAD block layer after exploding

    http://www.cad-notes.com/autocad-tip-remove-alternate-unit-bracket-in-dimension/http://www.cad-notes.com/how-to-add-action-recorder-macro-to-tool-palettes/http://www.cad-notes.com/how-to-use-the-autocad-status-line-to-provide-real-time-reporting/http://www.cad-notes.com/insert-block-without-being-asked-to-input-value/http://www.cad-notes.com/do-you-know-that-you-can-plot-using-trueview/http://www.cad-notes.com/enable-block-attribute-dialog-during-insertion/http://www.cad-notes.com/autodesk-seek-get-real-world-bim-models-for-free/http://www.cad-notes.com/disable-shiftmid-button-as-transparent-orbit/http://www.cad-notes.com/autocad-tip-turning-off-multifunctional-grips/http://www.cad-notes.com/how-to-embed-image-to-autocad-drawing/http://www.cad-notes.com/text-alignment-technique/http://www.cad-notes.com/autocad-tip-exaggerating-drawing-scale/http://www.cad-notes.com/autocad-2012-legacy-snap-to-grid/http://www.cad-notes.com/autocad-tip-working-with-different-measurement-unit/http://www.cad-notes.com/brians-tip-why-should-we-use-template/http://www.cad-notes.com/how-to-publish-autocad-layouts-to-multiple-pdf-file-with-single-sheet/http://www.cad-notes.com/autocad-tips-quickly-switching-between-drawings/http://www.cad-notes.com/how-to-load-autolisp-program/http://www.cad-notes.com/plugins-to-switch-between-autocad-drawings-quickly/http://www.cad-notes.com/how-to-find-and-replace-text-in-autocad/http://www.cad-notes.com/autocad-tip-renumber-text-automatically/http://www.cad-notes.com/when-rotating-objects-use-news/http://www.cad-notes.com/using-autocad-undo-its-more-than-just-one-step-back/http://www.cad-notes.com/working-with-shared-contents-eliminating-slow-network-performance/http://www.cad-notes.com/autocad-block-cant-be-inserted-using-non-uniform-scale/http://www.cad-notes.com/command-line-only-express-tools-have-you-used-them/http://www.cad-notes.com/eleven-killer-tool-palette-macros-for-working-with-autocad-viewports/http://www.cad-notes.com/the-killer-tool-palette-macros-download-it-here/http://www.cad-notes.com/set-default-system-variables-in-acaddoc-lsp/http://www.cad-notes.com/3-construction-or-reference-objects-we-rarely-use/http://www.cad-notes.com/how-to-trim-and-copy-objects-within-a-boundary/http://www.cad-notes.com/autocad-tip-rotate-multiple-texts-at-once-to-readable-orientation/http://www.cad-notes.com/what-will-went-wrong-if-i-use-imperial-template-for-my-metric-drawing/http://www.cad-notes.com/learn-how-to-write-command-scripts-for-autocad-and-automate-your-plotting/http://www.cad-notes.com/how-to-automate-autocad-with-command-macros/http://www.cad-notes.com/load-autocad-with-defined-profile-and-template/http://www.cad-notes.com/another-autocad-accuracy-issue-problem/http://www.cad-notes.com/using-multiple-layer-states-in-multiple-layouts/http://www.cad-notes.com/autocad-2013-customization-sync-conflict/http://www.cad-notes.com/show-autocad-hidden-messages/http://www.cad-notes.com/how-to-add-autocad-layer-information-in-pdf-file/http://www.cad-notes.com/keep-autocad-block-layer-after-exploding/