automation and drives drive es guided tour intern edition 01/02 drive es basic to start, a couple of...
TRANSCRIPT
Automation and Drives
Drive ESGuided Tour
Intern Edition 01/02
Drive ES Basic
To start, a couple of words about how Drive ES Basic is integrated into the product environment.
Communications Engineering/start-up
Drive ES Basic
Drive ES PCS7
CFC V 5.1(Prerequisite for Drive ES Graphic)
Drive ESGraphic
Drive ES SIMATIC
Product position:Drive ES Basic is a pure engineering tool for drives which either run on PC or PG.Drive ES Basic is the basis tool and is always required when using Drive ES Graphic.
Automation and Drives
Drive ESGuided Tour
Intern Edition 01/02
Drive ES Basic
Automation project:As is usual for the SIMATIC Manager - it starts with a project structure.
Automation and Drives
Drive ESGuided Tour
Intern Edition 01/02
Drive ES Basic
Hardware configuration:After the project has been set-up, it must
be configured. This is done by opening the associated configuration by double-clicking on “Hardware“.
Automation and Drives
Drive ESGuided Tour
Intern Edition 01/02
Drive ES Basic
Hardware configuration: A window is provided at the right, the Hardware Catalog - the required components can be selected here. In this case, the profile rail as subrack.
Automation and Drives
Drive ESGuided Tour
Intern Edition 01/02
Drive ES Basic
Hardware configuration: And there is the profile rail - the subrack for the SIMATIC-CPU.
Automation and Drives
Drive ESGuided Tour
Intern Edition 01/02
Drive ES Basic
Hardware configuration: A power supply is selected.
Automation and Drives
Drive ESGuided Tour
Intern Edition 01/02
Drive ES Basic
Hardware configuration: ... and inserted in the rack...
Automation and Drives
Drive ESGuided Tour
Intern Edition 01/02
Drive ES Basic
Hardware configuration: ... a CPU is inserted in the precisely the same way...
Automation and Drives
Drive ESGuided Tour
Intern Edition 01/02
Drive ES Basic
Hardware configuration: The system now goes into the Drives Catalog.
Automation and Drives
Drive ESGuided Tour
Intern Edition 01/02
Drive ES Basic
Hardware configuration: Profibus communications for the new drive are defined in a dialog box.
Automation and Drives
Drive ESGuided Tour
Intern Edition 01/02
Drive ES Basic
PROFIdrive:The clock-cycle synchronous properties can be configured using Drive ES...
Automation and Drives
Drive ESGuided Tour
Intern Edition 01/02
Drive ES Basic
PROFIdrive:... and also slave-to-slave communications.
Automation and Drives
Drive ESGuided Tour
Intern Edition 01/02
Drive ES Basic
Project view:When the hardware configuration has been completed - the completed project can be seen. In this case, the data of the SIMATIC CPU and the drives can be seen in the common data management.
Automation and Drives
Drive ESGuided Tour
Intern Edition 01/02
Drive ES Basic
Commissioning drives: After double-clicking on the parameter set of a drive - in this case, position control - the necessary start-up tool is opened - in this case SimoCom U.
Automation and Drives
Drive ESGuided Tour
Intern Edition 01/02
Drive ES Basic
Commissioning drives: Drive Monitor is another start-up tool for MASTERDRIVES, which can be seen here with its prompted start-up...
Automation and Drives
Drive ESGuided Tour
Intern Edition 01/02
Drive ES Basic
Commissioning drives: The SIMODRIVE POSMO A drive is also represented with its tool - SimoCom A...
Automation and Drives
Drive ESGuided Tour
Intern Edition 01/02
Drive ES Basic
Commissioning drives: …and naturally, Starter for MICROMASTER 4 drives.
Automation and Drives
Drive ESGuided Tour
Intern Edition 01/02
Drive ES Basic
CPU I/O ... Drive
DP-Bus
PC/TS-Adapter
Plant modemPlant modemPG/PC-Modem
PG/PC-Modem
Teleservice and routing: Drive ES Basic uses the communication paths of the SIMATIC Manager, which means that SIMATIC Teleservice can be used in order to remotely service the drive.
Automation and Drives
Drive ESGuided Tour
Intern Edition 01/02
Drive ES Basic
Teleservice and routing: For routing, access to higher automation levels, the access route (chanel) is defined in the NetPro.
Teleservice and routing: …via the CPU...
Teleservice and routing: …to the drive.