automotive test solutions - rekirsch · pdf fileautomotive test solutions mobile connectivity...

Automotive Test Solutions

Mobile Connectivity - Enabled

Safety and Driver Aids

In-Vehicle Networks

Wireless Connectivity

Intelligent Transport Systems

Electromagnetic Interference

Automotive Test SolutionsThe complexities of the modern automobile continue to increase with more and more technology being added from communications to safety. These systems add cost and reliability issues which must be addressed in the early stages and throughout the vehicles life.

From an eCall tester based on a complete network simulator and a software tool simulating Public Safety Answering Points (PSAP). GPS modules, on-board sensors and radar systems aiming to protect and aid the driver Anritsu has a solution for all onboard safety systems.

GPS, GNSS, eCall, TPMS, RKE, FMCW, ERA-GLONASS

Wireless technologies have acquired importance during the last decade in the automotive industry, making the experience of driving safer and more comfortable. All these wireless standards, including mobile, short range wireless and navigation, help to keep the driver connected.

LTE/2G/3G/4G, Bluetooth, WiFi, AM/FM/DAB/RDS

Anritsu offers a full set of instruments for electromagnetic compatibility (EMC), where different technologies are simultaneously operating in public frequency bands ensuring EMC is an important requirement.

OTA, EMC, EMI, Interference Hunting

ITS (Intelligent Transport Systems) refers to a variety of communication systems inside or outside the vehicle. In the connected car environment, there are several sensors that are communicating with other vehicles and the road, including lanes and signals.

V2V, V2X, Car 2 Car, M2M

The automotive industry is constantly increasing the presence of technology in vehicles. In excess of a hundred separate control units will be part of the future car, generating more and more applications for informing and entertaining the passengers.

Ethernet, CAN, Optical Fibres, RF cables & connectors

www.anritsu.com

Wireless ConnectivityWireless technologies have acquired increasing importance during the last decade in the automotive

industry, making the experience of driving easier, safer and more comfortable. All these wireless

standards, including mobile, short range wireless and navigation, help to keep the driver connected

everywhere, while broadcast technologies are now utilized to keep all of the car occupants connected

and entertained.

Besides FM/AM radio, today’s vehicle incorporates digital radio (DAB) as well as video broadcasting,

including DVB and ISDB standards. Anritsu’s portfolio allows testing of these technologies at all stages

of product development, from R&D to production, providing dedicated solutions and universal wireless

testers that will ensure your products comply with the latest specification.

The Vector Signal Generator MG3710A is a best-of-class, multi-function, signal generator with excellent RF and baseband performance that can be used to test performance on all

in-vehicle broadcast technologies including FM+RDS, AM, DAB, DVB and ISDB standards among others. The MG3710A features wideband vector modulation and offers built-in baseband waveform generation with large-capacity memory to ensure maximum versatility. It supports all key mobile communications and wireless LAN standards, and it also has the exceptional performance required for emerging and proprietary wireless communications technologies.

MG3710A Vector Signal Generator

•Vector Signal Generator supporting frequencies of 100 kHz to 2.7/4/6 GHz.

•Built-in wideband (160 MHz/120 MHz) baseband signal generator.

•Dual RF (Optional) provides two independent RF outputs.

•Dual Waveform Memory (Optional) enables two independently modulated signals per RF Output.

The MD8475A is an all-in-one base station simulator supporting LTE, LTE-Advanced, W-CDMA/HSPA/HSPA Evolution/DC-HSDPA, GSM/EGPRS, CDMA2000 1X/1xEV-DO Rev. A. and

TD-SCDMA/TD-HSPA. It supports services as eCall, IMS, VoLTE, off-load tests and call-processing tests for smartphones which are now present on vehicles. In addition, the time required to configure a test environment is greatly reduced by the easy-to-use GUI-based SmartStudio software, as well as supplied test sequences for automatic remote control of the GUI. All this will make vehicle testing easy, quick and reliable.

MD8475A Signalling Testers

•Supports multimode terminals and all cellular standards, including LTE (2x2 MIMO), LTE-Advanced (Carrier Aggregation).

•SmartStudio GUI supports easy setup of test environments and functional tests.

•Automated mobile terminal verification testing with test sequences.

•Built-in PC with control and application server functions reduces benchtop footprint.

The MT8820C is an all-in-one solution supporting all cellular standards available on a vehicle, including LTE-A, LTE, 3G and 2G technologies. It is a

high-end instrument for RF measurements, which makes it ideal for all stages of product development, not only for R&D but also at production due to its non-call processing mode, reducing test times to optimise cost per unit.

MT8820C Radio Communications Analyzer

•RF tests for LTE-Advanced DL CA and LTE terminals and other.

•Non-call processing mode for fast RF measurements.

•Excellent operability cuts test and maintenance times on manufacturing lines.

Anritsu’s MS2830A spectrum and signal analyzer is the best option for in-vehicle testing of 2G, 3G, LTE and LTE-Advanced signals. It supports measurement of modulation and Tx

characteristics, including adjacent channel leakage power and spectrum mask as well as spurious measurements requiring a wide dynamic range. The capture and replay function can be used to better compare the real world effects with simulated designs and performance, which will ensure the product quality.

MS2830A Spectrum Analyzer

•9 kHz to 26.5/43 GHz frequency range.

•For wideband down-converter; built-in 1 GHz IF output band.

•Best-of-class wide dynamic range over 6 GHz.

•Supports Noise Figure and BER measurement.

•Excellent eco-friendly product with low power consumption of 190 VA min.

Anritsu’s MT8870A Universal Wireless Test Set is the best solution for testing at R&D and production stages of all wireless standards: cellular (2G, 3G, LTE, LTE-Advanced), SRW (802.11x,

Bluetooth and ZigBee), navigation (GPS, GLONASS and Beidou) and broadcast technologies (AM/FM radio, DBV and ISDB standards). It is ideal not only for production, where it can make fast measurements, including calibration, validation and 3GPP tests, but it also includes CombiView which is ideal for R&D and troubleshooting. And it is prepared for future standards due without additional hardware improvements, thanks to its wide frequency operating range and 160 MHz measurement bandwidth.

MT8870A Universal Wireless Tester

•Designed for mass production of wireless modules, it operates in a non-signalling environment for minimum test time per unit.

•Supports all wireless standards, including cellular, SRW, navigation and broadcast.

•Modular design with up to 16 high performance RF ports in one small chassis.

•Built-in signal generator and signal analyser on each module. Wide frequency range from 10 MHz to 6 GHz and 160 MHz measurement bandwidth for 802.11ac, LTE-Advanced and future standards.

The Anritsu MT8860C is the only WLAN Test Set with Network and Direct modes for testing all WLAN devices integrated to a vehicle, conforming

to IEEE 802.11 standards. It is an integrated one-box test set dedicated to testing 802.11 WLAN devices. It provides a high-speed measurement solution that is suitable for both production testing and design proving. In one box, it replaces existing test systems that typically require power meters, spectrum analyzers, and Gold Radios with external attenuators. The result is a test instrument with faster integration into production (direct mode), offers a universal solution for all WLAN chip sets, and is simpler to maintain and calibrate.

MT8860C WLAN Test Set

• Integrated test set for 802.11b/g/a/n transmitter and receiver measurements.

•“Network” mode - tests devices using standard WLAN protocols to establish a connection to the DUT.

•”Direct” mode - tests WLAN devices with the support of test mode software from the silicon supplier.

•LANLook software for instrument configuration and results display.

•CombiTest software for production test requirements.

www.anritsu.com

Safety and Driver Aids

Aiming to ensure safety and the quickest responses from emergency services in the event of a traffic

accident, an emergency call (eCall) made automatically by an involved car could save millions of lives. As

soon as on-board sensors (e.g. the airbag sensors) register a serious accident, the car will automatically

dial the standard emergency phone number and send vital information including location and speed.

Once that vital information is transmitted, a voice channel will be established between the call centre

operator and the passengers to check their status.

Anritsu offers an eCall tester based on a complete network simulator and a software tool simulating Public

Safety Answering Points (PSAP). GPS modules, on-board sensors and radar systems aiming to protect

and aid the driver can be tested using Anritsu’s Spectrum Analyzers, Signal Generators or Universal

Wireless Testers.

VectorStar ME7838A broadband system addresses the needs of semiconductor fab and fabless companies targeting automotive radar applications. In addition to

continued growth in 77 & 92 GHz automotive radar III-V development, it is expected that a major push for emerging SiGe development will continue. SiGe will offer lower costs and prices for the automotive industry and push car radar into mid to low price models. VectorStar is used during the design phase where device characterization is used to analyze broadband performance of transistors and MMICs for radar systems and sub-systems.

ME7838A VectorStar Vector Network Analyzer

•The VectorStar ME7838 Series broadband VNA offers the widest available single frequency sweep from 70 kHz to 110, 125, and 145 GHz with mmWave bands to 1.1 THz.

• Industry-best calibration and measurement stability: 0.1 dB vs 0.6 dB over 24 hrs.

•All versions support the 3744x-Rx receiver for noise figure measurements to 125 GHz.

•Compact, lightweight mmWave modules (0.6 lb vs 7+ lbs and 1/50 the volume) offer low cost installation on smaller probe stations.

The MT8820C supports high-speed batch measurements of RF TRx characteristics and call connection tests for 2G/3G/4G mobile modules that could be integrated into the car’s

communication system. MT8820C is also extremely suited to Over-the-Air (OTA) environments for EMC testing, being perfectly applicable in automotive, where the chassis effect over the multiple antennas integrated in the car must comply with strict regulations.


•Designed for high volume smartphones, tablets and wireless modules manufacturing test applications.

•Modular design with up to 16 high performance RF ports in one small chassis, to minimize test time and ensure an efficient cost per tested unit.

•Built-in signal generator and signal analyzer on each module.

MG3710A can be used as an Arbitrary Waveform Generator, totally flexible for simulating GNSS signals (i.e. GPS, GLONASS), perfect for driver-aid systems development. Its dual RF

option makes it easy to implement complex test scenarios that would normally require multiple synchronized signal generators, such as:

•Wanted+ InterferenceSignals forReceiverBlockingTesting

•Wanted+TwoCWTonesforReceiverIntermodulationTesting

•Wanted+DelayedSignalsforMultipathTesting

MG3710A Vector Signal Generator

•Vector Signal Generator supporting frequencies of 100 kHz to 2.7/4/6 GHz.

•Built-in wideband (160 MHz/120 MHz) baseband signal generator

•Dual RF (Optional) provides two independent RF outputs.

•Dual Waveform Memory (Optional) enables two independently modulated signals per RF Output.

MD8475A Signalling Tester helps to the development of in-car safety technologies such as eCall or ERA-GLONASS. The Network Simulator can be easily integrated with an IVS

module for simulating end-to-end emergency calls as per the mentioned standards.

MD8475A Signalling Testers

•Supports multimode terminals.

•LTE (2x2 MIMO), LTE-Advanced (Carrier Aggregation), W-CDMA/HSPA/HSPA Evolution/DC-HSDPA, GSM/EGPRS, CDMA2000 1X/1xEV-DO Rev. A, TD-SCDMA/TD-HSPA.


•Supports 2-cell test environment, including Inter-RAT Cell Reselection, Redirection, Cell Change, CS Fallback, etc.

•eCall tester can be reliably integrated with the platform.



MS2830A Spectrum Analyzer is a multi-application tool for Automotive Industry. The system uses a built-in vector signal generator to reproduce captured actual signals. These captured pulse signals and noise are analyzed using the flexible VSA function supporting Spectrum, Power vs. Time, and Frequency vs. Time displays. In addition, spectrum performance can be checked intuitively using the Spectrogram display showing frequency, time, and power on one screen to troubleshoot and develop car wireless equipment, such as RKE and TPMS, using FSK signals. The characteristics of time-shifted signals, such as DSRC and IEEE802.11p used for car-to-car and road-to-car communications, can be measured using analysis tools like MATLAB.


•9 kHz to 26.5/43 GHz frequency range; 43 GHz max. built-in pre-amp option.


•Supports Noise Figure and BER measurement (options).


www.anritsu.com

In-Vehicle Networks

The Automotive Industry is constantly increasing the presence of technology in-vehicles. With sometime

more than a hundred separate control units in the modern vehicle, all generating more and more

applications for informing and entertaining the passengers. All these devices, connected with each

other, are constantly sending data to central computers or displays. Anritsu’s OTDR and GigE analyzers

are used for ensuring the high transmission rates in all points of the in-vehicle network.

Anritsu’s Site Master and Vector Network Analyzers will easily check the proper continuity of cables and

connectors.

Anritsu MT9090 uOTDR is the right answer for testing the growing optical elements that form part of the car’s communication and infotainment systems. The increasing amount of

optical sensors in cars will require uncountable checks of optical cables, connectors or splitters. Anritsu MT9090 uOTDR is the easiest and most comprehensive means of completing these test.

MT9090A Network Master uOTDR

•High-end OTDR performance in a pocket-size package.

•Exclusive, integrated launch fiber provides accurate initial connector measurement without external devices.

•Bluetooth, Wi-Fi and Ethernet connectivity.

•Complete PON testing through splitters up to 1 x 64.

•High resolution and extremely short deadzones ensure thorough short fiber evaluation.

•Complete fiber maintenance tool including optical power meter and visible source “red light”.

Anritsu S331E SiteMaster Compact Handheld Cable and Antenna Analyzer can complete sweeps quickly, perform calibrations instantly, and implement fast trace naming while in the field.

Ideal product for Cable & Antenna Installation and Maintenance in the automotive industry. Insertion Loss , 2-port measurements of Amplifiers, duplexers, diplexers or filters , Phase Matching Cables and Antenna Tuning are relevant applications fitting into the upcoming in-vehicle networks.

S331E Handheld Spectrum Analyzer

•Cable and Antenna Analyzer: 2 MHz – 4 GHz

•Return Loss, VSWR, Cable Loss, Distance-To-Fault, Smith Chart, 1-Port Phase

•Field-proven design: Four-hour battery life, rugged, compact, lightweight, daylight viewable display

•USB connectivity, built-in touch screen keyboard

• Intuitive menu-driven touch screen user interface

Anritsu Shockline Compact VNA MS46122A is the smallest, most advanced 2-port VNA in the world.

The series benefits from patented shock line VNA-on-chip technology, which simplifies the internal VNA architecture at high frequencies, reduces instrument cost, and enhances accuracy and measurement repeatability. All the members of the MS46122A series are low cost full-reversing 2-port VNAs aimed at RF and microwave applications in manufacturing, engineering and education. With 220 microseconds per point sweep speed and better than 100 dB dynamic range they are extremely suitable for a wide variety of device test applications in the Automotive Industry, such as cable, connectors, antenna or radar.

MS46122A USB Vector Network Analyzer

•World’s first series of compact VNAs from 1MHz to 40 GHz for cost-effective measurements.

•PC control takes advantage of external computer processing power and functionality.

•Compact 1U high package for efficient use of bench and rack space.

•Time domain with time gating option grants easier and faster fault identification.

Today’s in-vehicle communication networks are becoming more and more sophisticated as new technologies like OTN and Ethernet are being fully deployed alongside the entire car. The

Network Master Pro MT1000A redefines the direction of future test platforms by bringing these network test requirements to a portable device, making it the ideal tool for field testing.

MT1000A Network Master Pro

•All-in-one field transport tester – supports testing from 1.5 Mbps to 10 Gbps.

•Optical Transport Networks (OTN) installation and maintenance.

•Carrier Class Ethernet installation and troubleshooting.

•Powerful Storage Area Networking (SAN) testing UPDATED.

•Quick and easy testing of SDH/SONET and PDH/DSn networks.

•Testing of client signals mapped into OTN.

•Easy and intuitive GUI.

•Dual port at all rates.

•WLAN/Bluetooth/LAN connectivity.

•PDF and XML report generation for documentation of test results.

•Remote operation and remote control (scripting).

For installation, commissioning and quality verification the Network Master Gigabit Ethernet tester provides powerful and flexible traffic generation capabilities, allowing you to easily

test the in-vehicle network under various conditions, including generation of VLAN traffic. The instrument also provides facilities for BER testing of the lines, performance statistics and quality evaluation.

MT9090A Gigabit Ethernet Analyzer

•Versatile, purpose-built solution for Gigabit Ethernet field testing.

•Comprehensive Ethernet testing for installation, maintenance and troubleshooting.

•Ping test, traceroute test and Electrical cable diagnostics.

•Two ports simultaneously work for shortening multiple ports installation, including pass through test and in-line monitoring test.

•Option for automated ITU-T Y.1564 testing, simultaneously testing of multiple traffic streams emulating real world networks.

•Option for automated RFC 2544 testing.

•Test Automator simplifies operation and ensure proper set-up.

•Channel Stats option identifies error streams, top talkers and network attack.

•Service disruption time measurement to test the performance of realtime applications like voIP and IPTV.

www.anritsu.com

Intelligent Transport System

ITS (Intelligent Transport Systems) refers to all types of communication inside or outside the vehicle. In

the connected car environment, there are several sensors that are communicating with other vehicles

and the road, including lanes and signals. Current applications, known as Car2Car, V2V or V2x include

radar and eCall, but this will increase in the next few years as vehicles will be equipped with a higher

number of sensors and driver aids.

Anritsu offers a complete set of instruments and compact software solutions to make M2M testing easy

and in line with ITS standards, as well as 802.11p.

.

The MD8475A is an all-in-one base station simulator supporting all cellular standards and M2M specific applications. It supports services as eCall, IMS, VoLTE, off-load tests and

call-processing tests for smartphones which are now present on vehicles. In addition, the time required to configure a test environment is greatly reduced by the easy-to-use GUI-based SmartStudio software, as well as supplied test sequences for automatic remote control of the GUI. All this will make M2M testing easy, quick and reliable.

MD8475A Signalling Tester

•Supports multimode terminals and all cellular standards, including LTE (2x2 MIMO), LTE-Advanced (Carrier Aggregation).




Anritsu’s MS2830A spectrum and signal analyzer can be used for testing of 2G, 3G, LTE and LTE-Advanced signals on a vehicle-to-vehicle or vehicle-to-x test environment. It supports measurement

of modulation and Tx characteristics, including adjacent channel leakage power and spectrum mask as well as spurious measurements requiring a wide dynamic range. The capture and replay function can be used to better compare the real world effects with simulated designs and performance, which will ensure the product quality.


•9 kHz to 26.5/43 GHz frequency range.

•For wideband down-converter; built-in 1 GHz IF output band.


•Supports Noise Figure and BER measurement.


Anritsu’s MT8870A Universal Wireless Test Set is the best solution for testing at R&D and production stages of all M2M, V2V, V2x technologies. It is ideal not only for production, where

it can make fast measurements, including calibration, validation and tests according to the relevant standards, but it also includes CombiView which is ideal for R&D and troubleshooting. And it is prepared for future standards due without additional hardware improvements, thanks to its wide frequency operating range and 160 MHz measurement bandwidth.


•Designed for mass production of wireless modules, it operates in a non-signalling environment for minimum test time per unit.

•Supports all wireless standards, including cellular, SRW, navigation and broadcast.

•Modular design with up to 16 high performance RF ports in one small chassis.

•Built-in signal generator and signal analyser on each module. Wide frequency range from 10 MHz to 6 GHz and 160 MHz measurement bandwidth for 802.11ac, LTE-Advanced and future standards.

Tchirp

∆t

ƒb

ƒd

Freq

Time

Transmitted signalReceived signal

D(m) = · ∆t = ƒbƒd

c2

c2

· · Tchirp

D(m)

www.anritsu.com

Spectrum Master MS2720T is a multifunctional tool ideal for EMC/EMI testing in automotive environments. From Transmitter Spectrum Analysis to Received Signal Analysis, where location and identification of in-band

interference and out-of-band spurios signals need to be tested, MS2720T is ideal. Also perfect for Signal Strength Mapping in order to determine the most suitable location for antennas in the car or AM & FM analog proofing measurements. The two-port front end with tracking generator function allows the measurement of filters, attenuators, amplifiers and cables inside the car.

MS2720T Series Handheld Spectrum Analyzer

•Five options offering 9 kHz to 9, 13, 20, 32 & 43 GHz.

• Internal Atomic Clock option for the ultimate in handheld frequency accuracy.

•Measurements: Occupied Bandwidth, Channel Power, ACPR, C/I, Emission Mask, Field Strength, Interference Analyzer: Spectrogram, Signal Strength, RSSI, Mapping.

•Tracking Generator up to 20 GHz.

Electromagnetic Interference

Anritsu offers a full set of instruments for electromagnetic compatibility (EMC). Where different

technologies are simultaneously operating in public frequency bands thorough EMC and EMI testing are

of vital importance.

Electromagnetic interference (EMI) testing is a must before launching a product into the real wireless

world. Spectrum Analyzers, near field probes and handhelds from Anritsu will ensure your product is

compatible with the standards.

MS2711E can reach almost the same range of applications than its bigger brother MS2720T. Its overall performance is more than enough whether you are performing complex interference analysis or assessing signal

quality. The MS2711E Spectrum Master delivers ease of use, rich functionality, and the best-in-class price/performance you’ve come to expect from Anritsu.

MS2711E Series Handheld Spectrum Analyzer

•Spectrum Analyzer: 9 kHz to 3 GHz.

• Interference Analyzer with Interference Mapping.

•High Accuracy Power Meter.

•Channel Scanner, GPS, AM/FM/PM Analyzer.

•Tracking Generator: 500 kHz to 3.0 GHz.

•Field-proven design: Three-hour battery life, rugged, compact, lightweight, daylight viewable display.

The MT8820C supports high-speed batch measurements of RF TRx characteristics and call connection tests for 2G/3G/4G mobile modules that could be integrated into the car’s

communication system. MT8820C is also extremely suited to Over-the-Air (OTA) environments for EMC testing, being perfectly applicable in automotive, where the chassis effect over the multiple antennas integrated in the car must comply with strict regulations.

MT8820C Radio Communications Analyzer

•RF tests for LTE-Advanced DL CA and LTE terminals.

•Batch measurements for key measurement items for RF Tx tests.

•One unit supports key measurement items for RF Rx tests.

•Excellent operability cuts test and maintenance times on manufacturing lines.

Anritsu MS2830A Spectrum Analyzer supports measurements of Tx characteristics, including adjacent channel leakage power, spectrum mask, and frequency counter, as well as spurious measurements requiring

a wide dynamic range. MS2830A offers an EMI measurement detection mode and RBW configurations used for CISPR standards.

MS2830A Series Spectrum Analyzer

•9 kHz to 26.5/43 GHz frequency range; 43 GHz max. built-in pre-amp option.


•Supports Noise Figure and BER measurement (options).


www.anritsu.com

Anritsu Corporation 5-1-1 Onna, Atsugi-shi, Kanagawa, 243-8555 JapanPhone: +81-46-223-1111Fax: +81-46-296-1238

• U.S.A.Anritsu Company1155 East Collins Blvd., Suite 100, Richardson, TX 75081, U.S.A.Toll Free: 1-800-267-4878Phone: +1-972-644-1777Fax: +1-972-671-1877

• CanadaAnritsu Electronics Ltd.700 Silver Seven Road, Suite 120, Kanata, Ontario K2V 1C3, CanadaPhone: +1-613-591-2003 Fax: +1-613-591-1006

• Brazil Anritsu Eletrônica Ltda.Praça Amadeu Amaral, 27 - 1 Andar01327-010 - Bela Vista - São Paulo - SP - BrasilPhone: +55-11-3283-2511Fax: +55-11-3288-6940

• MexicoAnritsu Company, S.A. de C.V.Av. Ejército Nacional No. 579 Piso 9, Col. Granada11520 México, D.F., MéxicoPhone: +52-55-1101-2370Fax: +52-55-5254-3147

• U.K.Anritsu EMEA Ltd.200 Capability Green, Luton, Bedfordshire, LU1 3LU, U.K.Phone: +44-1582-433200 Fax: +44-1582-731303

• FranceAnritsu S.A.12 avenue du Québec, Bâtiment Iris 1- Silic 638,91140 VILLEBON SUR YVETTE, FrancePhone: +33-1-60-92-15-50Fax: +33-1-64-46-10-65

• GermanyAnritsu GmbHNemetschek Haus, Konrad-Zuse-Platz 1 81829 München, Germany Phone: +49-89-442308-0 Fax: +49-89-442308-55

• ItalyAnritsu S.p.A.Via Elio Vittorini 129, 00144 Roma, ItalyPhone: +39-6-509-9711 Fax: +39-6-502-2425

• SwedenAnritsu ABBorgarfjordsgatan 13A, 164 40 KISTA, SwedenPhone: +46-8-534-707-00 Fax: +46-8-534-707-30

• FinlandAnritsu ABTeknobulevardi 3-5, FI-01530 VANTAA, FinlandPhone: +358-20-741-8100Fax: +358-20-741-8111

• DenmarkAnritsu A/S (Service Assurance)Anritsu AB (Test & Measurement)Kay Fiskers Plads 9, 2300 Copenhagen S, DenmarkPhone: +45-7211-2200Fax: +45-7211-2210

• RussiaAnritsu EMEA Ltd. Representation Office in RussiaTverskaya str. 16/2, bld. 1, 7th floor.Russia, 125009, MoscowPhone: +7-495-363-1694Fax: +7-495-935-8962

• United Arab E miratesAnritsu EMEA Ltd.Dubai Liaison OfficeP O Box 500413 - Dubai Internet CityAl Thuraya Building, Tower 1, Suit 701, 7th FloorDubai, United Arab EmiratesPhone: +971-4-3670352Fax: +971-4-3688460

• SingaporeAnritsu Pte. Ltd.60 Alexandra Terrace, #02-08, The Comtech (Lobby A)Singapore 118502Phone: +65-6282-2400Fax: +65-6282-2533

• IndiaAnritsu Pte. Ltd. India Branch Office3rd Floor, Shri Lakshminarayan Niwas, #2726, 80 ft Road, HAL 3rd Stage, Bangalore - 560 075, IndiaPhone: +91-80-4058-1300Fax: +91-80-4058-1301

• P.R. China (Hong Kong)Anritsu Company Ltd.Units 4 & 5, 28th Floor, Greenfield Tower, Concordia Plaza, No. 1 Science Museum Road, Tsim Sha Tsui East, Kowloon, Hong KongPhone: +852-2301-4980Fax: +852-2301-3545

• P.R. China (Beijing)Anritsu Company Ltd.Beijing Representative OfficeRoom 2008, Beijing Fortune Building, No. 5, Dong-San-Huan Bei Road, Chao-Yang District, Beijing 100004, P.R. ChinaPhone: +86-10-6590-9230Fax: +86-10-6590-9235

• KoreaAnritsu Corporation, Ltd.8F Hyunjuk Building, 832-41, Yeoksam Dong, Kangnam-ku, Seoul, 135-080, KoreaPhone: +82-2-553-6603Fax: +82-2-553-6604

• AustraliaAnritsu Pty. Ltd.Unit 21/270 Ferntree Gully Road, Notting Hill, Victoria 3168, AustraliaPhone: +61-3-9558-8177Fax: +61-3-9558-8255

• TaiwanAnritsu Company Inc.7F, No. 316, Sec. 1, Neihu Rd., Taipei 114, TaiwanPhone: +886-2-8751-1816Fax: +886-2-8751-1817

Specifications are subject to change without notice.

Please contact:

Part Number ?????-??? Issue 1 11 /14

automotive test solutions - rekirsch · pdf fileautomotive test solutions mobile connectivity...

Documents