auxiliary hvac | ram promaster - webasto · pdf filelondon hvac unit air distributor with...
TRANSCRIPT
Auxiliary HVAC | RAM ProMaster®
Standard Tie-in n Extreme Climate System
2
High performance aftermarket heating and cooling systems engineered for vehicle specific platforms that minimize install time and maximize reliability.
Auxiliary HVAC
Mobile + Online Customer Support
Mobile + Online Supportn Mobile Dealer Locator available for iOS and Android devicesn webasto.com - interactive website featuring product brochures and informationn techwebasto.com - training and technical documentationn webastoliterature.com - order the latest brochures/catalogs
3
London HVAC Unit
Air distributor with orbital directional vents is standard. Other ducting options are available.
System tie-in with Webasto
refrigerant T-Block
4
The London is a low profile, rear heating and cooling unit that packages into the driver‘s
overhead compartment designed to deliver conditioned air rearward into the cargo space.
The placement of the London offers convenience as well as minimal refrigerant, coolant and
condensate drain plumbing and wire harness routing.
Standard Tie-in HVAC | London
Controller with on/off switch, variable fan speed and variable temperature control is standard. The controller is packaged in-dash, or can be located anywhere inside the vehicle.
Control Unit
5
Specifications London
Color Black
Cooling Capacity 32,500 BTU/h (9.5 kW)
Heating Performance 44,500 BTU/h (13.0 kW)
Refrigerant R134A
Nominal Voltage 12V
Max. Power Consumption @ 12V 21 A
Max. Air Flow Evaporator Blower 471 cfm (800 m3/h)
Dimensions L x W x H 21.7 x 15.7 x 7.1 in (550 x 400 x 180 mm)
Weight 17 lbs (7.7 kg)
Product Features:n High capacity horizontal
heating and cooling unitn Low profile for minimal space
limitationsn 12 Volt (or 24 Volt models
available upon request)n Variable temperature controln Hot water heating and cooling
functionsn Operation from one single
controller
Vehicle Integration - CoolingThe London HVAC is tied into the Ram ProMaster® OEM front HVAC for cooling and utilizes the vehicle‘s existing
in-line condenser and compressor. ProMasters have optional factory rear A/C prep kits that allow for easy
integration with the factory front HVAC. Webasto kits are also available for ProMaster® vehicles that are not
equipped with A/C prep option.
Standard Tie-in HVAC | London
Vehicle Integration - HeatingHeating is achieved by plumbing the London‘s hot water heater core to the vehicle‘s engine coolant loop. Hot
water flow is controlled by Webasto hot water valve and auxiliary pump.
6
High-performance, twin-fan, Capri Condenser is lightweight with low noise operation
For applications that require maximum cooling capacity, the Extreme Climate Stand Alone
HVAC shares the same components as the Standard Tie-in Rear HVAC system (London), with
the addition of an auxiliary engine driven compressor, compressor mount kit and a roof
mounted/low-profile condenser (Capri).
Extreme Climate Stand Alone HVAC | Capri
Need More Cool?
Auxiliary Compressor
Optional ModulAir ducting system for optimal air distribution
7
Specifications Capri
Color White
Performance 35,800 BTU/h (10.5 kW)
Nominal Voltage 12V
Max. Power Consumption @ 12V 18 A
Dimensions L x W x H 32 x 23.6 x 5.9”
Weight 26.5 lbs (12 kg)
Product Features:n Less than 6-inches highn Low profile for minimal space
limitationsn Twin electric fan condensern Lightweight
Vehicle Integration - CoolingLondon Rear HVAC is integrated with an independent refrigerant loop consisting of auxiliary compressor and Capri
condenser. For minimal install time and plumping routing, the Capri condenser can be mounted directly above the
London Rear HVAC system on the roof of the vehicle. Under chassis mount condensers are also available.
Extreme Climate Stand Alone Rear HVAC | Capri
Vehicle Integration - HeatingHeating integration and function is identical to Standard Tie-in Rear HVAC.
Additional HVAC Configurations | Ibiza Vertical Unit
31,000 BTU/h | 471 cfm
webasto.com
Webasto Thermo & Comfort North America, Inc.
15083 North Road
Fenton, Michigan 48430
USA
Toll Free: 800-860-7866
Phone: 810-593-6000
Email: [email protected]
Optional low-profile (less than 2“) Webasto ModulAir, ceiling mount air ducting kit - connects to the Standard
Tie-in Rear HVAC (London) for evenly distributed air delivery. The kit is available in black or gray and sections can
be ordered individually for optimal lengths.
Universal Ducting | ModulAir
Auxiliary HVAC Kits | Ram ProMaster®
Standard Tie-in HVAC Kit n London HVAC Unitn A/C Plumbingn Hot Water Plumbing
Extreme Climate Kit
n London HVAC Unitn Capri Condensern A/C Plumbingn Hot Water Plumbing
Compressor + Mount Kitn Compressorn Mounting Hardware
ModulAir Duct Kitn Black or Greyn 4-Piece Setn Optional
n Harnessesn Controllern Brackets
n Harnessesn Controllern Brackets
Optional Accessories | Ducting + Kits