avk repair box with 6 or 10 elements 748/11-1213...avk repair box with 6 or 10 elements 748/11-1213...

4
· Elements made out of a pre-rolled plate of stainless steel AISI 304. · Design with welded AISI 304 studs and fingers. · Elements are completely pickled and passivated after welding. · Studs are Teflon coated to prevent cold welding (galling). · Stainless steel nuts made out of A4 quality. · Gasket of EPDM rubber with waffle structure and rounded tops. · Spanner plate is completely vulcanized into rubber gasket. · Diameter reach repair box 6 elements from 86 mm till 768mm. · Diameter reach repair box 10 elements from 86 till 1475 mm. · Elements available in different widths: 300, 400, 500 and 600 mm. · Elements are marked with labels from A till J. Used elements can be re-ordered to complete the repair box for another emergency. · Indication pressure class for (waste)water: - 10 bar up to DN 200 - 8 bar up to DN 400 - 6 bar up to DN 500 - 4 bar up to DN 600 - 2 bar for DN 700 and bigger · Studs protected with plastic protection caps. Features: Product description: · WRAS / W270 approved rubber · Tested by Kiwa according to BS8561 Repair box with 6 or 10 stainless steel elements, fingers 7,5 cm, AISI 304 and EPDM rubber. For water -40°C up to +120°C Test/Approvals: AVK’s repair box is an easy, quick and flexible solution for emergency repair of damaged pipes. With the stainless steel repair elements you can create your own repair clamp that can be used for permanent repair of cracks, (pin)holes or other damages in pipes. The repair box with 6 stainless steel elements can cover a range from 86 mm till 768 mm and the repair box with 10 stainless can cover a range from 86 mm till 1475 mm. All this can be obtained by a combination of elements. Available in AISI 304 and AISI 316, sealing material can be EPDM, NBR or FKM rubber. Fingers 7,5cm, AISI 304, EPDM rubber AVK REPAIR BOX WITH 6 OR 10 ELEMENTS 748/11-1213 1/4 24-dec-2019 12:06 yvkr - The designs, materials and specifications shown are subject to change without notice due to the continuous development of our product range. COPYRIGHT©AVK GROUP 2019

Upload: others

Post on 01-Sep-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: AVK REPAIR BOX WITH 6 OR 10 ELEMENTS 748/11-1213...AVK REPAIR BOX WITH 6 OR 10 ELEMENTS 748/11-1213 1/4 yvkr -24-dec-2019 12:06 The designs, materials and specifications shown are

· Elements made out of a pre-rolled plate of stainless steel AISI 304.· Design with welded AISI 304 studs and fingers.· Elements are completely pickled and passivated after welding.· Studs are Teflon coated to prevent cold welding (galling).· Stainless steel nuts made out of A4 quality.· Gasket of EPDM rubber with waffle structure and rounded tops.· Spanner plate is completely vulcanized into rubber gasket.· Diameter reach repair box 6 elements from 86 mm till 768mm.· Diameter reach repair box 10 elements from 86 till 1475 mm.· Elements available in different widths: 300, 400, 500 and 600 mm.· Elements are marked with labels from A till J. Used elements can be re-ordered to complete the repair box for another

emergency.· Indication pressure class for (waste)water:

- 10 bar up to DN 200- 8 bar up to DN 400- 6 bar up to DN 500- 4 bar up to DN 600- 2 bar for DN 700 and bigger

· Studs protected with plastic protection caps.

Features:

Product description:

· WRAS / W270 approved rubber· Tested by Kiwa according to BS8561

Repair box with 6 or 10 stainless steel elements, fingers 7,5 cm, AISI 304 and EPDM rubber. For water -40°C up to +120°C

Test/Approvals:

AVK’s repair box is an easy, quick and flexible solution for emergency repair of damaged pipes. With the stainless steel repair elements you can create your own repair clamp that can be used for permanent repair of cracks, (pin)holes or other damages in pipes. The repair box with 6 stainless steel elements can cover a range from 86 mm till 768 mm and the repair box with 10 stainless can cover a range from 86 mm till 1475 mm. All this can be obtained by a combination of elements. Available in AISI 304 and AISI 316, sealing material can be EPDM, NBR or FKM rubber.

Fingers 7,5cm, AISI 304, EPDM rubber

AVK REPAIR BOX WITH 6 OR 10 ELEMENTS 748/11-1213

1/424-dec-2019 12:06yvkr -

The designs, materials and specifications shown are subject to change without notice due to the continuous development of our product range.

COPYRIGHT©AVK GROUP 2019

Page 2: AVK REPAIR BOX WITH 6 OR 10 ELEMENTS 748/11-1213...AVK REPAIR BOX WITH 6 OR 10 ELEMENTS 748/11-1213 1/4 yvkr -24-dec-2019 12:06 The designs, materials and specifications shown are

Fingers 7,5cm, AISI 304, EPDM rubber

AVK REPAIR BOX WITH 6 OR 10 ELEMENTS 748/11-1213

Component list:

1

2

3

4

5

1.

2.

3.

4.

5.

Protection cap

Stud

Nut

Washer

Bridge

Plastic

Stainless steel 304

Stainless steel A4

Stainless steel A2

Stainless steel 304

6

7

8

9

10

6.

7.

8.

9.

10.

Lining

Body plate

Spanner plate vulcanized

Side plate

Finger

EPDM rubber

Stainless steel 304

Stainless steel 304

Stainless steel 304

Stainless steel 304

Components may be substituted with equivalent or higher class materials without prior notification.

Reference nos. and dimensions:

AVK ref. no. L12

mm

W

mm

Bolts

(no x M x L)

Theoretical

weight / kg

748-11-030040-1213

748-11-030060-1213

748-11-032040-1213

748-11-032060-1213

748-11-038040-1213

748-11-038060-1213

748-11-041060-1213

748-11-044040-1213

748-11-044060-1213

748-11-047040-1213

748-11-047060-1213

748-11-050060-1213

748-11-054040-1213

748-11-054060-1213

748-11-064040-1213

748-11-064060-1213

300

300

320

320

380

380

410

440

440

470

470

500

540

540

640

640

400

600

400

600

400

600

600

400

600

400

600

600

400

600

400

600

5XM16X180

8XM16X180

5XM16X180

8XM16X180

5XM16X180

8XM16X180

8XM16X180

5XM16X180

8XM16X180

5X M16X180

8XM16X180

8XM16X180

5XM16X180

8XM16X180

5XM16X180

8XM16X180

4.7

7.2

4.7

7.3

5.0

7.8

8.0

5.3

8.2

5.5

8.4

8.7

5.8

8.9

6.3

9.7Row to make sure table is never blank

2/424-dec-2019 12:06yvkr -

The designs, materials and specifications shown are subject to change without notice due to the continuous development of our product range.

COPYRIGHT©AVK GROUP 2019

Page 3: AVK REPAIR BOX WITH 6 OR 10 ELEMENTS 748/11-1213...AVK REPAIR BOX WITH 6 OR 10 ELEMENTS 748/11-1213 1/4 yvkr -24-dec-2019 12:06 The designs, materials and specifications shown are

Fingers 7,5cm, AISI 304, EPDM rubber

AVK REPAIR BOX WITH 6 OR 10 ELEMENTS 748/11-1213

3/424-dec-2019 12:06yvkr -

The designs, materials and specifications shown are subject to change without notice due to the continuous development of our product range.

COPYRIGHT©AVK GROUP 2019

Page 4: AVK REPAIR BOX WITH 6 OR 10 ELEMENTS 748/11-1213...AVK REPAIR BOX WITH 6 OR 10 ELEMENTS 748/11-1213 1/4 yvkr -24-dec-2019 12:06 The designs, materials and specifications shown are

Fingers 7,5cm, AISI 304, EPDM rubber

AVK REPAIR BOX WITH 6 OR 10 ELEMENTS 748/11-1213

4/424-dec-2019 12:06yvkr -

The designs, materials and specifications shown are subject to change without notice due to the continuous development of our product range.

COPYRIGHT©AVK GROUP 2019