avt profile
DESCRIPTION
AVT-ProfileTRANSCRIPT
AuVitronics Limited
Company Profile
A PERFORMANCE DRIVEN COMPANY
COMPANY : AuVitronics Limited ( AVT )
Head Office: Factory: 3rd Floor, House of Habib, Plot # 3, Block 7/8 Plot Nos. 137, 138, 153 & 154 Jinnah Co-operative Housing Society, Sector " A " H.I.T.E , Hub Shahrah-e-Faisal District Lasbella, Balochistan. Karachi . - Pakistan. Phones : 34312030-40, 34312191-3, Phones : 0853-303014, 302875, 34312322 302876 and 302438 Fax : 34312195 Fax : 0853-303013 Email : [email protected] , [email protected] Email : [email protected] Website: www.auvitronics.com www.avtdoors.com
GROUP / COMPANY The House of Habib is the heir of a rich tradition of commerce and banking dating back to 1841. Beside Banking, the group activities range from automobile to audio media, chemicals, ceramic tiles, jute products, auto parts etc. etc. The House of Habib manages 12 Public and a network of Private companies and has equity and technical collaboration with British, Belgium, Japanese and Norwegian companies. AVT was established by House of Habib in 1983 and is the pioneer in using modern technology for the production of audio cassettes in Pakistan. The company has over 400 employees. AVT takes pride in providing significant employment to females, which comprise over one third of the work force. AVT entered the 21st century by diversifying into Plastic moulding parts and sub-assemblies, in collaboration with a Malaysian and Canadian company. Our high quality products received outright acknowledgment from the auto makers and encouraged us to further invest and induct 3,000 tons injection moulding machine, biggest moulding machine in Pakistan, to improve production capability and product line to meet increase demand of auto makers.
CORPORATE MOTTO Customer trust based on prompt service and consistent high quality. As with House of Habib companies our quality assurance philosophy is simple. Each and every employee, not just one department within the company, shares the quality responsibility. The team approach is the key to the manufacturing of consistent, high quality products.
COMPANY'S STRENGTH
System certification through SGS for ISO 9001 : 2008 , ISO 14001 : 2004 and OHSAS 18001 : 2007.
Well-knitted and committed team of dedicated professional managers, staff and skilled work force
Leadership & consistency in quality
Leaders in specialized injection moulding & assemblies.
Injection moulding of parts on machines ranging from 75 tons to 3000 tons. Welding technology. i.e., hot Plate Welding, Vibration Welding, Ultrasonic, Supersonic Welding.
State of art manufacturing facilities.
Part of a very strong financial and professional group.
TECHNICAL ASSISTANCE / COLLABORATION
Local We have joined hands with a leading design company, namely Simcon International, having world renowned state of art hardware and software, like Unigraphics, Solid edge, Ansys, Image ware, Surface, Minolta’s non-contact 3-D Digitizer etc. etc., for meeting all our moulds / tools design requirement. Foreign
1. Koito Manufacturing Co. Ltd. Japan
2. Toyoda Gosei Co. Ltd. Japan
3. Cubic Company Limited Japan
4. Murakami Corporation Japan
5. EP Moulds & Dies Malaysia
6. Krauss Maffei I Germany
7. Ascend’s Industries Taiwan
8. Auto Korea Korea
QUALITY ASSURANCE PHILOSOPHY & EQUIPMENT Our products being supplied to Japanese and Korean O.E.Ms, speak volumes of our commitments to meeting international quality standards. This is possible with the help of wide range of quality assurance equipment and well trained workforce. Each stage of operation, from development, purchasing, component manufacture, assembly process, packing and shipping is subject to strict quality control. Major Equipment Make Coordinate Measuring machine Mitutoyo Microscope with camera Nikon Muffle Furnace Blue M. Electronics Constant Temperature Bath Blue M. Electronics Vacuum Oven with vacuum pump Blue M. Electronics Electronic weighing scales Metler Instruments Fiber optic light source Nikon Microscopes with lens 20-160 times (fitted with solid state camera)Nikon Climatic chamber with chart recorder Blue M. Electronics Digital storage Oscilloscope Kikusui Audio test generator Leader Audio test systems Sound Technology Audio test gauges Engunity.
MANUFACTURING FACILITIES
* Injection Moulding * Bake painting facility & UV drying system * Blow Moulding * Design & Fabrication of dies & moulds, jigs &
fixtures. * Cubic Printing * Slitting * Polyurethane moulding * High speed Digital Recording * Precision assembly of components
PRODUCTS Manufacturer of high quality audio cassette, both pre-recorded and blank.
Range of auto parts manufacturing includes interior and exterior parts, comprising bumpers, radiator grill, garnishes, scuff plates, duct quarter vents, lamps assemblies, wheel caps, inside & outside door handles, reservoir tanks, etc.
Range of Hydrographic Cubic Printed parts comprising, Panel instrument cluster finish, Panel console upper & Switch sets power window.
Range of assembly of precision parts, comprise manual & electrical mirror. Steering wheel, using polyurethane material.
Door Panels comprise high pressure injection moulded outer skin with reaction injected moulded Polyurethane. Frames and Windows are made from extruded wood plastic.
ENVIRONMENTAL HIGHLIGHTS AVT manufacturing process and products are environment friendly. All plastic waste is very carefully recycled before disposal. All liquid, gas and fumes effluents are precisely controlled through Environment Manufacturing System ISO 14001 : 2004.
FUTURE PLANS We aim to expand our product range with emphasis on plastic related items / parts for automobiles etc. In pursuance of our objective, we would like to enter into T.A Agreement with renowned manufactures. We plan to introduce new technologies such as Plastic Chrome plating, Expanded Poly Propylene moulding, Besides Metalizing, BMC moulding, Silicon coating etc. for reflector and lamps. We plan to put up above facilities in new plant located at PQA. Being low cost quality conscious manufacturer. We are fully geared up to become a reliable supplier of Auto parts to OEM’s.
MAJOR CUSTOMERS
Audio cassettes manufacturing facilities have been closed as this media is no more in demand.
Automotive parts are supplied to customers only, as under : Indus Motors Company. Dewan Farooque Motors Limited. Atlas Honda Limited. Sigma Motors. Thal Engineering. Procon Engineering.
PRODUCT RANGE
REAR COMBINATION LAMP
FRONT TURN SIGNAL
OUTSIDE
RESERVE TANK WASHER TANK
BRACKET
HANDLE OUTSIDE HANDLE INSIDE HANDLE ASSEMBLE
HANDLE OUTSIDE HANDLE OUTSIDE HANDLE INSIDE
HEAD LAMP BACKUP LAMP
PIPE FUEL FILLER ASH RECEPTACLE GARNISH FRONT DOOR
REAR LICENSE PLATE LAMPSIDE TURN SIGNAL
RESERVE TANK
PRODUCT RANGE
GLOVE COMPARTMENT
GARNISH FRONT PILLAR
PLATE REAR DOOR SCUFF
COVER STEREO OPENING
QUARTER VENT
OUTER MIRROR MANUAL OUTER MIRROR ELECTRICAL
PILLAR UPPER
STEERING WHEEL STEERING WHEEL
PILLAR LOWER
GARNISH CENTERGARNISH CENTER PILLAR
BACK VIEW MIRROR
STEERING WHEEL DUCT ASSEMBLY
WHEEL CAPAUDIO CASSETTE
GARNISH ROOF SIDE INNERPLATE FRONT DOOR SCUFF
COROLLA 3 SPOKE COROLLA 4 SPOKE LANDROVER
IMV-HILUX
STEERING WHEEL
PRODUCT RANGE
INTERIOR PARTS
BOX CONSOLE RR
PANEL SUB ASSY
INSTRUMENT LWR
PANEL ASSY PACKAGE
TRAY TRIM
PRODUCT RANGE
ENGINE COMPARTMENT PARTS
HEATING & VENTILATING PARTS
PRODUCT RANGE
HYDROGRAPHIC PRINTING PARTS
EXTERIOR PARTS
MANUFACTURING FACILITIES ( KOITO LAMP PLANT )
General View Sealent Application
Photometric Testing Vibration Welding Annealing Furnace
Head Lamp Assembly Line
MANUFACTURING FACILITIES (MOULDING)
1680 TON MOULDING
700 TON TO 1000 TON MOULDING 75 TON TO 350 TON MOULDING
3,000 TON MOULDING
MANUFACTURING FACILITIES
COMPONENT ASSEMBLY LADIES COMPONENT ASSEMBLY GENTS
CLIMATIC TESTING DIGITAL RECORDINGFINAL TESTING OF LAMPS
MANUFACTURING FACILITIES ( PAINTSHOP)
MANUFACTURING FACILITIES ( CUBIC PLANT )
MANUFACTURING FACILITIES ( PU PLANT )
STEERING WHEEL DEVELOPMENT
Finished Product Mould Insert CNC machining
Start up of the process with the help of 3D scanning of the part
Point cloud data from Vivid 900 is translated into surface by using UG surfacer.
Part model and mould parting surfaces are generated by UG mould Wizard
Tool path generation and mould surface inspection
1 2
3
4
5 6 7
PEELING STRENGTH
CHEMICAL RESISTANCE TEST
APPLYI
STEERING WHEEL TESTING
GRIP WEAR RESISTANCE TESTSTRENGTH
CHEMICAL RESISTANCE
HARDNESS TESTING
ENERGIZING CONFIRMATION TEST
MACHINE DESIGN & DEVELOPMENT
HOT PLATE WELDING : JAR AND PUMP WASHER TANK
HOT PLATE WELDING MACHINE CAD MODEL HOT PLATE WELDING MACHINE
Contributing to the strengths of Auvitronics Ltd our strong Machine design and Development department is constantly delivering Machine after machine.
TESTING FACILITIES DEVELOPMENT
DEVELOPMENT OF TESTING JIGS & FIXTURES FOR NEW COROLLA 065A
CARVING FLUSH ROCK
PICTURE (FIXED) CASEMENT (HINGE) HORIZONTAL SLIDER
BUKHRA STEPPE
Innovative engineering and design results in products of exceptional performance and convenience. avt doors are built with strength and safety features for maximum peace of mind . avt composite doors comprise patent-pending features for maximum strength and stability. Innovative 3mm injection moulded skins are joined to a specially extruded aluminum frame, fitted with special hot plate welded skin holders and subsequently filled with rigid polyurethane for high rigidity, strength, thermal and accoustic insulation.
avt Composite
Doors & Windows
avt wood plastic composite (WPC) windows create & opportunity to choose the exact style that will enhance the look of your home. Every avt WPC window is custom built to your order. Properties of Wood Plastic Composite (WPC) >Water Resistant >Termite Resistant >Climate Resistant >Can be Nailed >Can be Plained >Can be Cut by Saw
• Frames are available both in wood plastic and powder coated sheet metal. • Installation is easily possible either by - PU Adhesive, Hole Fast or Screws
Rubber Seal
Window Frame
2mm G.I. Reinforcement
Beading
Installation by PU Adhesive
FRAMES
SIZES LOAD BEARING CAPACITIES Awami Pedestrian Vehicle Truck
12” X 12” 150kg 250 kg NA NA 18” X 18” 150 kg 250 kg 1000 kg NA 24” X 24” NA 250 kg 1000 kg NA 900 mm Dia. NA NA NA 25 tons
Plastic injection molded and FRP Manhole Covers Where compromise on
• Performance
• Aesthetics
• Environment
• Economics
is not an option.
12”x12” 18”x18” 24”x24” 900mm Dia
Features and benefits of alternate materials and technology are as under: • 100 % water proof, rust proof and impact resistant. • Being resistant to SO2 and other chemicals, have much longer life. • High strength to weight ratio, hence light weight and easy to handle • Lockable safety feature for children. • Anti slip surface texture and aesthetically appealing. • Available in different load baring capacities and sizes to suit any requirement. • Tested and certified by NED university, Material testing Laboratory. • Negligible scrap value, hence less prone to theft.
Auvitronics Pedestrian and Vehicle grade manhole covers are produced with high pressure injection molding technology using reinforced grade of Poly Propylene which is weather, SO2, chemical and impact resistant . Heavy duty range of truck grade Manhole Covers are produced in FRP for petrol pumps or similar usage. Awami is an economical version of pedestrian grade suitable for low usage areas like narrow passageways and Overhead tanks.
avt Green
Division