2018FEB

Jatulon TileRoman TileSmall Corrugated TileRoof Accessories

FIBER CEMENTTILEEasy to install, good water drainage

Attractive color, tough and durable

Diamond Building Products Public Company Limited.

www.dbp.co.th Call Center : 02 619 2333DIAMONDBrandOfficial

Standard Color

Metallic ColorSpecial Color

Natural Happiness BrownGolden

Dragon OrangeWealthy RedProsperous BluePlatinum Grey Fresh Green

alsoSpecial Model

2.30 m

alsoSpecial Model

2.30 m

Cordia Orange Gerbera Red Lily RedDiamond Green

Diamond VioletDiamond Red

Diamond Blue Diamond Brown

NEW

BESTSELLER

BESTSELLER

recommends!

Jatulon Tile

Tile dimension (W X L) (cm)

Purlin spacing (cm)Tile Weight (kg/sheet)

Recommended service pitch

Thickness (mm)

Average amount of application (sheet/sq.m)

50 x 120 cm

5.8 kg / 6.9 kg

25-40 degrees100

4 mm / 5 mm

2.15 sheet

50 x 150 cm

7.3 kg / 8.6 kg

25-40 degrees130

4 mm / 5 mm

1.65 sheet

50 x 230 cm*

13.2 kg

8 degrees and more100

5 mm

1.1 sheet

Creating an aesthetic dimension with Jatulon tile features creative design for modern statement and elegance for yourroofs; exhibiting remarkable glow and charm with a touch of glamour, roofing that harmoniously reflects the luxurioustaste of home owners, with the special quality of Jatulon tiles that features high strength, durability and long service life. With the dedication to develop products with a difference, this has resulted in tiles with striking and stylish curvatures,and product with outstanding characteristics.

Special properties• The properties of corrugated forms have been deigned to favor strong and durable corrugations, to support greater loads and to withstand pressure and impact, as the tiles have up to 4 corrugations and are manufactured with modern technology.• Jatulon tiles facilitate effective rainwater drainage, as the curvature of the trough sections can allow for better water runoff comparedto other tiles in the market.• Jatulon tiles are distinctive in colors, attractive and stylish, with 4 corrugations that generate a sparkling reflection and distinctive dimension to the tiles.• Jatulon tiles are as easy to install as fiber cement tiles that are commonly available in the market.

*Only Natural color and Platinum Grey

* The product colors shown may differ from the actual colors, due to effect from printing technique.

Roof Ridge Accessories, Jatulon Tile

Gable roofswith service pitch of

25-40 degrees

Hip roofswith service pitch of

30-35 degrees

1

7

8

65

4

3 2 9

10

13

11

12

End LakeWeight : 1.4 kg / Dimensions : 21 x 60 cmAmount of application : 1 sheet/point• For covering the bottommost bargeboard.

Ridge Straight TypeWeight : 1.3 kg / Dimensions : 29 x 41 cmAmount of application : 2.8 sheet/meter • For covering along the roof ridge with pitch of less than 25 degrees.

End Hip RidgeWeight : 1.0 kg / Dimensions : 28 x 31 cmAmount of application : 1 sheet/point• For covering the bottom end of hip rafter.

3-Way Apex (Y-type)Weight : 1.8 kg / Dimensions : 40.5 x 45 cmAmount of application : 1 sheet/point • For covering on top of the roof ridge, and the intersecting topmosthip ridge.

4-Way ApexWeight : 1.5 kg / Dimensions : 39 x 39 cmAmount of application : 1 sheet/point• For covering the topmost sectionof 4-way hip rafter.

4-Way Apex for 4 gable endsWeight : 1.5 kg / Dimensions: 39 x 39 cmAmount of application : 1 sheet/point • For covering on top of the roof ridge, where the roof ridgesintersect 4 ways.

RakeWeight : 1.3 kg / Dimensions : 21.5 x 60 cmAmount of application : 2 sheet/meter• For covering the side along the bargeboard,on top of the barge end tiles.

3-Way Apex (T-type)Weight : 1.5 kg / Dimensions : 35.5 x 39 cmAmount of application : 1 sheet/point• For covering on top of the roof ridge, where the roof ridgesintersect at T-joint.

Front RidgeWeight : 1.1 kg / Dimensions : 21.5 x 31 cmAmount of application : 1 sheet/point• For covering on top of the end ridge,at the top of gable.

Ridge tile for lean-to roof, Modern style, Jatulon(Tiling from right to left/left to right)Weight : 2.1 kg / Dimensions : 50 x 39 cm Amount of application : 2.2 sheet/meter• For covering the front area of lean-to roof.

RidgeWeight : 1.6 kg / Dimensions : 29 x 50.5 cmAmount of application : 2.17 sheet/meter• For covering along the roof ridge with pitch of25-40 degrees.

Verge end tile, Modern styleWeight : 1.5 kg / Dimensions : 60 x 21 cm Amount of application : count per section• For covering the last side area of lean-to roof.

Hip RidgeWeight : 1.3 kg / Dimensions : 20 x 41 cmAmount of application : 2.8 sheets/meter• For covering along the hip ridge with pitchof 30-35 degrees; the row of tiles on both sidesmust be aligned.

Verge tile, Modern styleWeight : 1.4 kg / Dimensions : 60 x 21 cmAmount of application : 2 sheet / meter• For covering the side area of lean-to roof.

11

22

3

4

5

6

7

17*

28

9

10

11

12

13

Remark: For the installation of ridge tile (straight type), for both Jatulon and Roman tiles, alwaysinstall the dry-fix system before installing the ridges.

Standard Color

Metallic Color Special Color

Shady Blue Prosperous Blue Fortune Blue Wealthy Green Fresh GreenGolden

Dragon OrangeHappiness Brown Wealthy Red

Cordia Orange

Diamond Blue

Diamond Green

Diamond Emerald

Diamond Brown Diamond Orange

Diamond Violet Diamond Red

BESTSELLER

BESTSELLER

BESTSELLER

recommends!

TIS.79-2529

Roman Tile

Diamond Roman tile are high-quality fiber cement roof tiles that are certified by international standards. They are notedfor eye-catching colors and the double-coating system that exhibit liveliness in all color shades; with long service life, and can withstand all types of weather, adding a balanced touch of elegance to homes and buildings; easy-to-install, convenient and optimize installation time and effort.

* The product colors shown may differ from the actual colors, due to effect from printing technique.

Tile dimension (W X L) (cm)

Purlin spacing (cm)Tile Weight (kg/sheet)

Recommended service pitch

Thickness (mm)

Average amount of application (sheet/sq.m)

50 x 120 cm

4.8 kg / 6.2 kg

10-45 degrees100

4 mm / 5 mm

2.22 sheet

50 x 150 cm

6.0 kg / 7.8 kg

10-45 degrees130

4 mm / 5 mm

1.7 sheet

Remark: For the installation of ridge tile (straight type), for both Jatulon and Roman tiles, alwaysinstall the dry-fix system before installing the ridges.

Roof Ridge Accessories, Roman Tile

1

23

5

6

4

3

4

5

2

6

8

1

7

9

10

12

11

15

13

14

Adjustable Ridge (upper/lower piece)Weight : 2.0 kg / Dimensions : 55 x 33 cm / 55 x 30 cmAmount of application : 2.22 pair/meter• For covering all types of roof ridge line, adjustablepitch of 10-45 degrees.

Wall Ridge (lay from left to right/right to left)Weight : 1.2 kg / Dimensions : 50 x 28 cmAmount of application : 2.22 sheet/meter• For covering over the roof ridge that meets the wooden wall/siding(not suitable for cement wall).

Hip Ridge (upper/lower piece)Weight : 1.6 kg / Dimensions : 78 x 35 cm / 78 x 33 cmAmount of application : 2.8 pair/meter• For covering the hip ridge with pitch of 15-30 degrees.

3-Way Apex Ridge (Y-type) (15, 20, 25 degrees)Weight : 1.9 kg / Dimensions : 60 x 60 cmAmount of application : 1 sheet/point• For covering over the adjustable ridge tile and the last hip ridge tilethat joins together.

3-Way Apex Ridge (T-type) (15, 20, 25 degrees)Weight : 1.9 kg / Dimensions : 60 x 60 cmAmount of application : 1 sheet/point• For covering over the adjustable ridge tile where the ridge joinstogether to form T shape.

3-Way Round Ridge (Y-type)Weight : 1.3 kg / Dimensions : 45 x 45 cmAmount of application : count per section• For covering over the 3-head round ridge and the lastcurved angle hip that joins together.

3-Head Round RidgeWeight : 1.7 kg / Dimensions : 40 x 50 cmAmount of application : 2.22 sheet/meter• For covering the roof ridge with pitch of 25-40 degrees.

Front Ridge Weight : 1.0 kg / Dimensions : 29 x 27 cmAmount of application : count per section• For covering over the 3-head round ridge tile at thetop of gable.

3-Way Round Apex (T-type) Weight : 1.5 kg Dimensions : 39 x 39 cm / Amount of application : count per section• For covering over the 3-head round ridge, where the roof ridgemeets to create T shape.

4-Way Round Apex Weight : 1.5 kg Dimensions : 48 x 48 cm / Amount of application : count per section• For covering over the topmost section of all 4 hip rafter line(used with 3-head round ridge tile).

4-Way Round Apex for 4 gable ends Weight : 2.2 kg Dimensions : 52 x 52 cm / Amount of application : count per section• For covering over the 3-head round ridge, where the roof ridgeintersects 4 ways.

Ridge tile for lean-to roof, modern style, Roman tileWeight : 2.1 kg / Dimensions : 50 x 39 cmAmount of application : 2.2 sheet/meter• For covering the front area of topmost tiles for lean-to roof.

Verge tile, modern style, Roman tileWeight : 1.4 kg / Dimensions : 60 x 21 cmAmount of application : 2 sheet/meter• For covering the side area of lean-to roof.

Verge end tile, modern style, Roman tile Weight : 1.5 kgDimensions : 60 x 21 cm / Amount of application : count per section• For covering the last side area of lean-to roof.

Adjustable Front Ridge Weight : 1.0 kg Dimensions : 29 x 35 cm / 29 x 34 cmAmount of application : count per section• For covering over the adjustable ridge for Roman tiles, at the gable end

Rake Weight : 1.5 kg / Dimensions : 60 x 20 cmAmount of application : 1 sheet/point• For covering the side along the bargeboard, on top ofthe barge end tiles.

End Rake Weight : 1.5 kg / Dimensions : 60 x 20 cmAmount of application : count per section• For covering the bottommost bargeboard.

Concave Hip Ridge Weight : 1.0 kg / Dimensions : 47 x 24 cmAmount of application : 2.8 sheet/meter• For covering the hip ridge, where the tile line on bothsides must be aligned.

Angle Front Ridge Weight : 1.2 kg / Dimensions : 27 x 43 cmAmount of application : count per section• For covering over the Angle ridge tiles of Roman tiles,at the top of gable.

End Hip ridge Weight : 1.5 kg / Dimensions : 56 x 57 cm Amount of application : count per section• For covering the bottom end of hip rafter.

Angle Ridge (10, 15, 20 degrees) Weight : 2.0 kg / Dimensions : 60 x 60 cmAmount of application : 2.22 pair/meter• For covering the gable roof ridge line, it is recommendedto select the angle ridge tile that matches the roof pitch.

4

6

5

3

2

1

Special ridges, Roman tile

12

10 7

3 2

4

1

68

511

9

13

1415

Standard Color

Fresh Green Wealthy RedWealthy Green Happiness Brown Prosperous Blue Fortune BlueGolden

Dragon Orange

BESTSELLER

BESTSELLER

BESTSELLER

recommends!

TIS.18-2529

Small Corrugated Tile

Roof Ridge Accessories, small corrugated tile

1

5

2

3

4

Wall Ridge (tiling from right to left /left to right)Weight : 1.3 kg / Dimensions : 54 x 20 cmAmount of application : 2.2 sheet/meter• For covering over the roof ridge that meets the wall.

Adjustable Ridge (upper/lower)Weight : 1.3 kg / Dimensions : 57 x 29 cm / 57 x 28 cmAmount of application : 2.2 pair/meter• For covering all types of roof ridge line, adjustable angle of 10-45 degrees.

Lean-To RidgeWeight : 1.5 kg / Dimensions : 54 x 15 cmAmount of application : 2.2 sheet/meter• For covering the front area of topmost tiles for lean-to roof/shed roof.

Angle Ridge (10 ,15 ,20 degrees) Weight : 2.0 kg / Dimensions : 54 x 50 cmAmount of application : 2.2 sheet/meter• For covering the gable roof line, it is recommended to select the angleridge tile that match the roof pitch.

Hip Ridge (upper/lower/semi- circle) Weight : 1.1 kg / Dimensions 76 x 20 cm / Semi-circle Dimensions : 11 x 27 cmAmount of application : 3 set /meter• For covering the hip ridge

Diamond small corrugated tile products manufactured from fiber cement which is popular in Thailand as well as neighboring countries, certified quality by international standard, superior attractiveness with 7 corrugations and adding to the roof contour; tough and durable, withstand all weather conditions in Thailand.

* The product colors shown may differ from the actual colors, due to effect from printing technique.

Tile dimension (W X L) (cm)

Purlin spacing (cm)Tile Weight (kg/sheet)

Recommended service pitch

Thickness (mm)

Average amount of application (sheet/sq.m)

50 x 120 cm

5.3 kg

10-45 degrees100

4 mm

2.22 sheet

50 x 150 cm

6.6 kg

10-45 degrees130

4 mm

1.7 sheet

1

5

4 3

2

Fiber Cement Tile Installation Guide

3 2

1

45°

45°

45° 90°90°90°

90°

45°

Direction of rainfall

Direction of tile installation

1. Inspect the roof framework to ensure perpendicularity and leveling, as this will guarantee neat and attractive installation of roof tiles and ridges.

2. Consider the direction for roof tiling, so that the installation is in opposite direction to rainfall. This will prevent rainwater intrusion at the overlapping section on the tile sides.

Roman Tile

5 cm

5 cm

20 cm

20 cm3. For securing tiles with self-drilling screws, secure 1 tile with 1 screw at the middle corrugation.

4. For Roman tiles, apply the corner cutting method with cutting distance equal to the overlapping distance, at 5 cm on the side and 20 cm along the length. The corner cutting should take into considera-tion from the direction of tile installation.

4-inch self-drilling screw

3-HeadRound Ridge

Ridge beam King post

Steel ridge bar1½ x 1½ in

Steel stud1½ x 1½ in

45degrees Distance B Distance B

Dist

ance

A

11. For installation of 3-head round ridge at the roof ridge area, first prepare the ridge supporting framework as illustrated, and secure with 4-inch hex head self-drilling screws, using 1 screw for each tile.

12. For the gable roof, start the tile installation from the mid-section of roof, on the triangle side towards the side, so to ensure that the tile corrugation around both sides of the hip rafter is a single corrugation.

13. For installation of curved hip ridge tile, follow the same steps for installation of 3-head round ridge (in 11) In order to ensure that the ridges are in full contact with the tiles, it is recommended to install the hip ridge tile together with the tiles around the hip ridges.

14. The tiles should be stored indoor and under roofing, or with protective cover in case of outdoor storage. Tiles should be stacked on flat, leveled ground that is dry and rigid. Place wooden plank of size 1.5 x 3 in to support underneath the tiles at both ends, at distance of 20 cm inward from the tile edge.**For Roman tiles, each tile stack should not have more than 140 sheets**

5 cm

Install tiles from right to left

1

Install tiles fromright to left

1

5. Install the first tile (1) so that the edge is 5 cm beyond the purlin, so that the edge section is downward corrugation that meets the inner side of bargeboard. This will ensure proper installation of the side ridges.

6.Secure the tiles with Diamond safety screws of length 3.5 in at the middle corrugation (it is recommended not to secure too tight, as the tile may be fractured)

Install tiles from right to left

12

20 cm

1

23

7. For the second tile (2) with top right corner cut, place the tile to overlap the first tile (1) (The corner cut should take into consideration from the direction of tile installation) and then installing the next tiles until the completing the entire row.

8. Start the next row with the third tile (3) with the bottom left corner cut, place the tile to overlap the first tile (1) so that the cut corner of second tile (2) and third tile (3) join evenly. Also ensure overlapping distance of 20 cm along the length of tile.

4. กระเบ้ืองลอนคู� ต�องมุงด�วยวิธีการตัดมุม โดยให�มีระยะตัด

เท�ากับระยะซ�อนทับด�านข�าง 5 ซม. ด�านยาว 20 ซม. และ

การตัดมุม ต�องพิจารณาจากทิศทางการมุง

4

32

1

20 cm

20 cm

9. For the fourth tile (4), cut the top right corner and bottom left corner, and install to overlap the second tile (2) and third tile (3). And then install the next tile by cutting the corner in the same manner.

10. For securing the barge end tile and verge tile, ensure that the barge end tile is in full contact with the tile corruga-tion. Secure the tile at 20 cm inward from the edge of tile.

Installation requires for cornercutting and linear tiling only!!!

Remark: Any installation without corner cutting or alternate tiling may increase the chance of easy tile fracture and resulting in water intrusion. The Company shall take no responsibility for any damage and problem arising from the installation, storage, and transportation or relocation in an incorrect manner.

Corner cutting for Fiber Cement Tile

Roman tiles Jatulon tiles

Small corrugated tiles Jatulon tiles, 2.30 meters3.5 cm 3.5 cm

3.5 cm 3.5 cm

30 c

m

30 c

m

30 c

m, e

qual

to o

verla

p le

ngth

Example of corner cutting,for tile installation fromleft to right

Example of corner cutting,for tile installation from

right to left

5 cm 5 cm

5 cm 5 cm

20 c

m

20 c

m

20 c

m, e

qual

to o

verla

p le

ngth

Example of corner cutting,for tile installation fromleft to right

Example of corner cutting,for tile installation from

right to left

9 cm 9 cm

9 cm 9 cm

20 c

m

20 c

m

20 c

m, e

qual

to o

verla

p le

ngth

Example of corner cutting,for tile installation fromleft to right

Example of corner cutting,for tile installation from

right to left

3.5 cm 3.5 cm

3.5 cm 3.5 cm

20 c

m

20 c

m

20 c

m, e

qual

to o

verla

p le

ngth

Example of corner cutting,for tile installation fromleft to right

Example of corner cutting,for tile installation from

right to left

Installation requires for cornercutting and linear tiling only!!!

Remark: Any installation without corner cutting or alternate tiling may increase the chance of easy tile fracture and resulting in water intrusion. The Company shall take no responsibility for any damage and problem arising from the installation, storage, and transportation or relocation in an incorrect manner.

Heat insulating sheet, double-sidedHeat insulating sheet, single-sided

Roof Accessories, Fiber Cement Tile

1234

Heat insulation sheet, single-sidedstandard model

Heat insulation sheet, double-sidedstandard model

Heat insulation sheet, single-sidedECO model

Heat insulation sheet, double-sidedstandard model

1 Aluminum foil- For insulating heat, and coated with UV resistant compound.

Aluminum foil- For insulating heat, and coated with UVresistant compound.

Aluminum foil- For insulating heat, and coated with UVresistant compound.

Three way strength reinforcing fiber- For securing the framework, add to thestrength of heat insulating sheet.

Polyethylene- For bonding the aluminum foil and Kraft paper, preventing waterintrus on guard, and does not conduct electricity.

Kraft paper- For reinforcing the strength for aluminum foil.

Polyethylene- For bonding the aluminum foil and Kraft paper, preventing waterintrusion guard, and does not conduct electricity.

Metalized film- For protecting against heat radiation from entering through the roof.

Three way strength reinforcing fiber- For securing the framework, add to the strength of heat insulating sheet.

Kraft paper- For reinforcing the strength for aluminum foil.

Aluminum foil - For protecting against heat radiation from entering through the roof.

Acrylic adhesive- For bonding the aluminum foil to Kraft paper,water intrusion guard, and does not conductelectricity.

2 Thermoplastic adhesive- For bonding the aluminum foil to polyethylene plastic.

3 Woven plastic- For reinforcing the strength, water and moisture resistance.

4 Polyethylene film- For preventing water intrusion, and does not conduct electricity.

1 Aluminum foil�- For insulating heat, and coated with UV resistant compound.

2 Three way strength reinforcing fiber- For securing the framework, add to the strength of heat insulating sheet.

3 Polyethylene- For bonding the aluminum foil and Kraft paper, preventing waterintrusion guard, and does not conduct electricity.

4 Kraft paper- For reinforcing the strength for aluminum foil�.

1

2 4 6

3

5

7

1

2

3

4

5

6

123456

Dimensions (m)

Small roll 1.25 x 20

Large roll 1.25 x 60

20

60

Area of application(sq.m)

*Remark: The application area that is exclusive of overlapping area.

DIAMOND BARRIER• Produced from 100% aluminum foil, provides 97% heat insulation• Reduce heat penetration into the house, saves electricity cost from air-conditioning• Durable against tear, with 3-way strength reinforcing fiber• Fire stop, in accordance with English standard BS476 (model specific)• Environmental-friendly• Lightweight and easy to install

1234

1234567

Roof Accessories, Fiber Cement Tile

DIAMOND INSULATION

VERY COOL DIAMOND Heat insulation is roll-type fiber glass insulation, and coated all around with silver metalized film that is designed for residential and office buildings; this can be installed above all types of ceiling members, with compact size, easy to install, protect against heat and is energy-efficient.

Product

Dimensions

Weight: 1 roll/ kg

Density: kg/m3

Thickness

Coating material

Amount of application

Thermal resistance(R-Value)

Thermal conductivity(K-Value)

Thickness, 2-in

0.60 x 4.00 m

1.44

12

50 mm

All around coating with metalized film

2.4 sq.m /roll

1.316 m2K/w7.692 Hr.FtF /Btu

0.038 W/m.k0.260 Btu in/hr.ft2F

Thickness, 3-in

0.60 x 4.00 m

2.16

12

75 mm

All around coating with metalized film

2.4 sq.m /roll

1.974 m2K/w11.538 Hr.FtF /Btu

0.038 W/m.k0.260 Btu in/hr.ft2F

Method for installation of heat insulation sheet

TIS.487-2526

Protects against heat enteringfrom the roof, and cool downthe house.

Saves electricity cost fromusing air-conditioning.

Durable as manufactured fromhigh quality fiber glass.

High heat tolerance, fire stop.

Environmental friendly.

Saves electricity cost fromusing air-conditioning

1. Open the ceiling section for installing Diamond heat insulating sheet above the ceiling.

2. Install Diamond heat insulating sheet along the ceiling line, by rolling out the sheet as illustrated.

3. After installing the sheet completely along the length of ceiling, close the ceiling section and repeat the same steps for all desired area.

4. In case of tear in the sheet, repair the tear with aluminum foil tape.

5. It is not recommended to install in area subjected to direct sunlight.

6. Leave an empty area of 3 inches for installing down light lamp.

Installation of Diamond dry-fix systemProperties : comprises of standard ridge underlying sheet, steel supporting bars,C-line bars and screws for securing the supporting bars and ridges.Application : for installing the roof ridges and hip rafter in replacement of mortar,and preventing water intrusion.Amount of application : 2.8 meter/set Weight : 1.10 kg

Bird guard sheet, Jatulon TilePackaging : 10 pieces per box (with screws) 1 box for covering 4.5 meters of farcia

Bird guard sheet, Roman TilePackaging : 10 pieces per box (with screws) 1 box for covering 4.5 meters of farcia

Bird guard plank,Jatulon Tile, Roman TileDimensions 0.8 x 15 x 300 cmWeight 4.1 kgAmount of application : 0.33 sheet/meter

Self-driving screws,Safety model, 3.5 inAmount : 50 pieces/boxApplication : 1 piece/1 sheet

Touchup paint for Jatulon TileRoman Tileand Small corrugated TileAmount : 50 pieces/boxApplication : 1 piece/1 sheet

Transparent TilesJatulon : 50 x 120 cmRoman : 120 cm /150 cmApplication : count per section

Diamond Purlin (for Jatulon, Roman and Small corrugated tile)Standard length : 4.0 m /6.0 mAmount of application :For 4.0 m purlin, use 0.35 piece/sq.m / For 6.0 m purlin, use 0.23 piece/sq.mMaximum rafter spacing : 1.20 meter

Roof Accessories, Fiber Cement Tile

408/163-165 40th Floor, Phaholyothin Place Building, Phaholyothin rd., Samsennai, Bangkok THAILAND 10400Tel. 0 2649 0742-4 Fax 0 2619 0488

Diamond Building Products Public Company Limited