axial fans - air movement and control association...2008/09/01 · amca 210-99 standard (fig. 12,...
TRANSCRIPT
MCOTRA Construction Specifications
Impellers:Breezax aerfoil blades are available in four typesof material:Glass Reinforced Polypropylene (GRP) whosechemical resistance is good when exposed tosome diluted acids and alkali, satisfactory with oilat normal temperature and good with variousorganics.Recommended max. Tip Speed = 1 05m!sec.Glass Reinforced Nylon (GRN), with greaterstrength and higher temperature capability.Recommended max. Tip Speed = ll5mIsec.Anti-static (GRN), whose main application is forinstallations defined as “potentially explosiveatmosphere” and where the risk of ignition of gasdust or vapours through sparking must beprevented.Aluminium (ALU), proven for use in emergencysmoke and fume extract applications up to 200°C.Recommended max. Tip Speed = lOOm/sec.
Production Range
Direct driven axial fans, with housing in weldedsteel, casing with double flange and impeller withadjustable blades in aluminium, GRP, or GRN.These fans are particularly suitable for theremoval of stale air, for ventilation, drying and forall those applications which entail moving largevolumes of air at low and medium pressures.ADTA fan sizes range from 500 mm up to 1600.
Air Performance
Air performance ratings of the fans described bythis catalogue have been derived fromperformance tests made with installation type “D”,with ducted inlet and ducted outlet.These tests were carried out in accordance withAMCA 210-99 standard (Fig. 12, for sizes up tosize 1120 and Fig. 15 above).Ratings are referred to the standard air density of1 .2 Kg/rn3.
Sound Power Level
Noise ratings are calculated starting from soundpower level measurements made in accordancewith the AMCA 300-96 standard, fig. 2D or 3D.The test results keep into consideration thepresence of the motor inside the fan.
Working temperature:-40°C to 70°C: GRP-40°C to 150°C: GRN-40°C to 200°C: ALU
Balance:All Nicotra axial impellers and fans are balancedaccording to lS01940 with grade G6.3
Hub SystemOur range of axial fans has fully adjustableblades and there are 5 hub systems, as shownbelow:
HUB TYPE NO. OF BLADES
Fan CasingAll casings are rolled and double-flanged from 2.5mm to 5 mm mild steel or EG plate. Standardfinishing is powder coating to Green RAL 6011 orequivalent coating, or galvanised finishes can beprovided upon request.
MotorThree-phase, 220 I 380 / 415 / 460V, 50/60 Hz,other frequencies and voltages on demand.
Direction of the AirADTA fans are normally supplied with the airflowing from the impeller to the motor (B).
110 Hub160 Hub230 Hub250 Hub
55 & 10
3, 6 & 123, 6 & 12
33OHub 4,8,12&16
ADTA 500/1 1 0/5B/25°
rr
;II;
It::’
,L
MCOTRA
500
Cco
CCU,
Blade AngleHub Dia. and size
Catalogue CNOOSODOI/500/a September 2008
Air Density (y): 1.20 kg/rn3
Installation Type °D”: Ducted Inlet Ducted Outlet
Fan Type: ADTA 500/11 015B125°Hub: 110Nurnber of blades: 5Blade type: BPitch: 25°
150
(‘3100
0)D(I)U)0)1
0C-)
50C,)
0
600
Motor type: IEC B3kW: 0.37Size: 71V: 415/3—Hz: 50
Speed (rpm): 1390 (nominal)Poles: 4Amp Max: 1.1Prot.: IP 55Ins. Cl.: F
AOTA 5001110/58125° -5 blades 25° Installation-Inst. Type “D’
Motor type: 0.37kW 415 V 50Hz 3 ph. 4 poles
Inlet Octave Band Inlet Li
Hz LjA1° L1°1
Ref. PsI. lPal 0 lm3/s] 63 125 250 500 1K 2K 4K 8K dB(A( dB
a 15 2.14 74 83 79 76 74 77 74 67 82 87
b 45 1.95 73 84 79 75 73 78 73 66 82 87
c 72 1.75 73 82 76 74 73 77 73 66 81 86
d 100 1.54 72 83 76 74 72 77 73 66 81 86
(1) Inlet Sound Power Level, A- weighted
(21 Inlet Sound Power Level, on - weighted
r NICOTRA FANS & BLOWERS MFG SDN BHDcertifies that the fan shown herein is licensed to bearthe AMCA Seal for Sound and Air Performance.
°°lO The ratings shown are based on tests and procedures— performed in accordance with AMCA Publication 211
and AMCA Publication 311 and comply with the
_________
requirements of the AMCA Certified Ratings Program.
Performance certified is for Installation Type D: Ducted Inlet -
Ducted Outlet. Speed (RPM) shown is nominal. Performanceis based on actual speed of test. Performance ratings do notinclude the effects of appurtenances (accessories).Power rating W is motor input power.The Sound Power Level ratings shown are in decibels referredto 10-12 watts calculated per AMCA 301. Values shown are forInlet Lwi & LwiA sound power levels for Installation type D: DuctedInlet - Ducted Outlet. Ratings include the effect of duct end correction.dBA levels are not licensed by AMCA International.
NICOTRA
0.0 0.5 1.0 1.5
Volume Flow Rate [m3/s]2.0 2.5
I:::300
— — — —
EEEH-
catalogue cN005000l/soOfa September 2008
Air Density (y): 1.20 kg/rn3
Installation Type °D°: Ducted Inlet - Ducted Outlet
ADTA 560/230/128115° -12 blades 15 Installation - Inst. Type “D”
Motor type: 1.5 kW 380 V 60 Hz 3 ph. 4 poles
Inlet Oclave Band L01 Inlet Lw
Hz L0 iv iv
Ref. PsI. Pal 0 lm3Isl 63 125 250 500 11< 2K 41< 81< dBIA) dB
a 0 2.52 75 72 86 88 85 84 83 79 91 93
b 174 1.87 86 83 102 92 90 85 79 72 97 103
c 286 1.24 87 84 96 90 88 84 77 70 93 98
d 392 0.93 84 81 92 89 86 84 79 73 91 95
Ill Inlet Sound Power Level, A-weighted
121 Inlet Sound Power Level, un-weighted
NICOTRA FANS & BLOWERS MFG SDN BHDcertifies that the fan shown herein is licensed to bearthe AMCA Seal for Sound and Air Performance.The ratings shown are based on tests and proceduresperformed in accordance with AMCA Publication 211and AMCA Publication 311 and comply with therequirements of the AMCA Certified Ratings Program.
Performance certified is for Installation Type D: Ducted Inlet -
Ducted Outlet. Speed (RPM) shown is nominal. Performanceis based on actual speed of test. Performance ratings do notinclude the effects of appurtenances (accessories).Power rating W is motor input power.The Sound Power Level ratings shown are in decibels referredto 1012 watts calculated per AMCA 301. Values shown are forInlet Lwi & LwiA sound power levels for Installation type D: DuctedInlet - Ducted Outlet. Ratings include the effect of duct end correction.dBA levels are not licensed by AMCA International.
NICOTRA
Fan Type: ADTA 560/230/12B/15° Motor type: IEC B3 Speed (rpm): 1765 (nominal)Hub: 230 kW: 1.5 Poles: 4Number of blades: 12 Size: 80L Amp Max: 3.5Blade type: B V: 380 I 3— Prot.: IP 55Pitch: 15° Hz: 60 Ins. Cl.: F
450
400
350
(‘3300
0)
- 150-I-,
Cl)
100
50
0
1300
1200
1100
11000
900
800
0.0 0.5 1.0 1.5
Volume Flow Rate [m3Is]2.0 2.5 3.0
catalogue cNoo5000lIs6o/a September 2008
MCOTRA
ADTA 630/160/1 OB/22.5°
500
Blade AngleHub Dia. and size
Catalogue CNOO5ODOI/630/a September 2008
Air Density (y): 1.20 kg/rn3
Installation Type D”: Ducted Inlet - Ducted Outlet
NICOTRA
Fan Type:Hub:Number of blades:Blade type:Pitch:
250
200
U
150D0(/)0U
100
(I)
50
0
2000
1800
1600
1400
1200
1000
ADTA 630/160/1OB/22.5° Motor type: IEC B3160 kW: 1.510 Size: 90LB V: 415/3—22.5u Hz: 50
Speed (rpm): 1440 (nominal)Poles: 4Amp Max: 3.7Prot.: 1P55Ins. Cl.: F
ADTA 630/160/1 0B/22.5 - 10 blades 22.5 Installation - Inst. Type ‘D”
Motor type: 1.5 kW 415 V 60Hz 3 ph. 4 poles
Inlet Octave Band L0 Inlet L0
Hz L0a°1 L,.,121
Ret. Pot. [Pal 0 [m3/s] 63 125 250 500 1K 2K 4K 8K dB(A) dB
a 25 4.65 86 77 83 83 82 80 80 78 88 91
b 100 4.23 84 79 83 83 82 80 80 77 88 91
c 174 3.54 92 85 88 87 86 84 81 76 91 96
d 249 1,89 94 98 90 87 84 81 75 70 90 101
(1) Inlet Sound Power Level, A - weighted
(2) Islet Sound Power Level, us - weighted
NICOTRA FANS & BLOWERS MFG SDN BHDcertifies that the fan shown herein is licensed to bearthe AMCA Seal for Sound and Air Performance.
° The ratings shown are based on tests and procedures
Iperformed in accordance with AMCA Publication 211and AMCA Publication 311 and comply with the
. requirements of the AMCA Certified Ratings Program.
Performance certified is for Installation Type D: Ducted Inlet -
Ducted Outlet. Speed (RPM) shown is nominal. Performanceis based on actual speed of test. Performance ratings do notinclude the effects of appurtenances (accessories).Power rating W is motor input power.The Sound Power Level ratings shown are in decibels referredto 10.12 watts calculated per AMCA 301. Values shown are forInlet Lwi & LwiA Sound power levels for Installation type D: DuctedInlet - Ducted Outlet. Ratings include the effect of duct end correction.dBA levels are not licensed by AMCA International.
0.0 0.5 1.0 1.5 2.0 2.5 3.0
Volume Flow Rate [m3!s]3.5 4.0 4.5 5.0
catalogue cNoo5000l/e3o/a September 2008
MCOTRA
ADTA 710/230/1 2B/1 7.5°
500
F—-i
‘frnzr HDEoEcJ
L_]
Q,o— UD — —
FS S S
7. 5•
Blade Angleand sizeHub Dia.
Catalogue CN00500011710/a September 2008
NICOTRAAir Density (y): 1.20 kg/rn3
Installation Type °D°: Ducted Inlet - Ducted Outlet
Fan Type: ADTA 710/230/12B/17.5° Motor type:Hub: 230 kW:Nurnber of blades: 12 Size:Blade type: B V:Pitch: 17.5° Hz:
350
300
Cl)250
0.200
(U-I
C/)
ADTA 7l0I230I12Bl17.5 -12 blades 17.5° Installation - Inst. Type D”
Motor type: 4kW 380 V 60 Hz 3 ph. 4 poles
Inlet Octave Band L Inlet L5
Hz Lu’
Ref. Psi. [Pa] 0 ]m3ls] 63 125 250 500 11< 2K 41< 81< dB(Al dB
a 0 6.31 80 86 84 86 88 87 87 87 94 95
b 161 5.52 82 86 91 89 92 93 90 87 98 99
C 286 4.58 87 87 95 98 100 98 91 85 104 105
d 397 3.07 98 92 104 98 95 92 86 80 101 107
lii Inlet Sound Power Level, A- weighted
121 Intel Sound Power Level, us- weighted
NICOTRA FANS & BLOWERS MFG SDN BHDcertifies that the fan shown herein is licensed to bearthe AMCA Seal for Sound and Air Performance.The ratings shown are based on tests and proceduresperformed in accordance with AMCA Publication 211and AMCA Publication 311 and comply with therequirements of the AMCA Certified Ratings Program.
Performance certified is for Installation Type D: Ducted Inlet -
Ducted Outlet. Speed (RPM) shown is nominal. Performanceis based on actual speed of test. Performance ratings do notinclude the effects of appurtenances (accessories).Power rating W is motor input power.The Sound Power Level ratings shown are in decibels referredto 1 0.12 watts calculated per AMCA 301. Values shown are forInlet Lwi & LwiA sound power levels for Installation type D: DuctedInlet - Ducted Outlet. Ratings include the effect of duct end correction.dBA levels are not licensed by AMCA International.
500
450
400
EC B34112M380 / 3—60
Speed (rpm): 1765 (nominal)Poles: 4Amp Max: 9Prot.: P55Ins. CI.: F
0.0 0.5 1.0 1.5 2.0
100
50
0
3400
3300
. 3200
3100
3000
2900
2800£3< 2700
2600
2.5 3.0 3.5 4.0 4.5
Volume Flow Rate [m3Is}5.0 5.5 6.0 6.5 7.0
-
7
- %ç_7d
cutniogue cNoossDol/71o/a September 2008
NKOTRA
ADTA 800/250M/1 2T/20°
560
r’
coCC
Blade AngleHub Dia. and size
Catalogue CNOO5QDOI!800/a September 2008
ADTA 8001250M112T120° - 12 blades 20 Installation - Inst. Type “D”
Motor type: 5.5kW 415 V 50Hz 3 ph. 4 poles
Inlet Octave Sand L,,j Inlet L1
Hz LuA ‘I L2t
Ref. Pst. [Pat 0 [m3/s) 63 125 250 500 1K 2K 4K 8K dB(A) dO
a 42 8.12 88 84 96 91 89 87 88 77 95 99
b 199 7.37 90 83 94 90 88 86 87 77 94 98
c 381 6.47 86 86 94 95 91 88 86 78 97 100
d 451 5.80 89 89 94 98 93 90 86 79 99 102
(I) Inlet Sound Power Level, A - weighted
(21 stat Sound Power Level, on - weighted
r NICOTRA FANS & BLOWERS MFG SDN BHDr
certifies that the fan shown herein is licensed to bearthe AMCA Seal for Sound and Air Performance.The ratings shown are based on tests and procedures
— performed in accordance with AMCA Publication 211and AMCA Publication 311 and comply with therequirements of the AMCA Certified Ratings Program.
Performance certified is for Installation Type D: Ducted Inlet -
Ducted Outlet. Speed (RPM) shown is nominal. Performanceis based on actual speed of test. Performance ratings do notinclude the effects of appurtenances (accessories).Power rating W is motor input power.The Sound Power Level ratings shown are in decibels referredto 10.12 watts calculated per AMCA 301. Values shown are forInlet Lwi & LwiA sound power levels for Installation type D: DuctedInlet - Ducted Outlet. Ratings include the effect of duct end correction.dBA levels are not licensed by AMCA International.
Air Density (y): 1.20 kg/m3
Installation Type “D’: Ducted Inlet - Ducted Outlet
NICOTRA
Fan Type: ADTA800/250M/12T/20° Motortype: IEC B3 Speed (rpm): 1450 (nominal)Hub: 250M kW: 5.5 Poles: 4Number of blades: 12 Size: 132S Amp Max: 11Blade type: T V: 415/ 3— Prot.: IP 55Pitch: 20° Hz: 50 Ins. Cl.: F
600
500
Ct3Pz. 4000)DC!)
300
0C-,
4-’
CD 2004-,
C/)
100
0
7000
_. 60000)
5000
4000-o
3000
0.0 4.0 5.0 6.0
Volume Flow Rate [m3!s]10.0
Catalogue CNOOS0001/800/a September 2008
ADTA 900/400T18C/22.5° - 8 blades 22.5 Installation - Inst. Type “D
Motor type: 11 Kw 380 V 60 Hz 3 ph. 6 poles
Inlet Octave Sand L0 Inlet L0
Hz L0Avt L
Ref. PsI. [Pal Q[m3Is) 63 125 250 500 1K 2K 4K 6K dB(A) de
a 0 12.12 86 99 90 90 88 87 82 76 94 101
b 127 10.80 86 100 91 90 89 87 83 77 94 101
c 273 9.27 87 102 92 91 89 88 84 80 95 103
d 348 7.39 95 104 100 97 95 91 86 81 100 107
III Inlet Sound Power Level, A -weighted
121 Inlet Sound Power Level, on - weighted
NICOTRA FANS & BLOWERS MFG SDN BHDcertifies that the fan shown herein is licensed to bearthe AMCA Seal for Sound and Air Performance.The ratings shown are based on tests and proceduresperformed in accordance with AMCA Publication 211and AMCA Publication 311 and comply with therequirements of the AMCA Certified Ratings Program.
Performance certified is for Installation Type D: Ducted Inlet -
Ducted Outlet. Speed (RPM) shown is nominal. Performanceis based on actual speed of test. Performance ratings do notinclude the effects of appurtenances (accessories).Power rating W is motor input power.The Sound Power Level ratings shown are in decibels referredto 1 0.2 watts calculated per AMCA 301. Values shown are forInlet Lwi & LwiA sound power levels for Installation type D: DuctedInlet.. Ducted Outlet. Ratings include the effect of duct end correction.dBA levels are not licensed by AMCA International.
Air Density (y): 1.20 kg/rn3
Installation Type D: Ducted nlet - Ducted Outlet
Fan Type: ADTA 900/400T/8C/22.5° Motor type: IEC B3 Speed (rpm): 1188 (nominal)Hub: 400 kW: 11 Poles: 6Number of blades: 8 Size: 160L Amp Max: 23.2Blade type: C V: 380 I 3— Prot.: P 55Pitch: 22.5° Hz: 60 Ins. CI.: F
NICOTRA
400
350
300
12
250
DC,)
200
U150
(I)100
50
0
8400
8200
— 8000
7800
7600
- 7400
7200
< 7000
6800
0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0
Volume Flow Rate [m3IsJ
—
4—
:::::::::::z:z:z::z:::::
,%
Catalogue CN0050001/9001a September 2008
NKOTRA
ADTA I 000/330M11 6AL/20°
630
‘---—I
r‘V 1’
L 4I IIç
LI
-f
C
Hub Dia.Blade Angleand size
Catalogue CNOO50001I1000/a September 2008
Fan Type:Hub:Number of blades:Blade type:Pitch:
700
600
500aci)
400C’)C/)ci)1
a_ 300(3
C/) 200
100
0
16000
_. 140000.)
12000
10000-Q
8000
IEC B3151 60L415/3—50
Speed (rpm): 1460 (nominal)Poles: 4Amp Max: 29Prot.: [P 55Ins. Cl.: F
NKOTRA
ADTA 1000/330M/16AL120° - 16 blades 20° Installation - Inst. Type “D”
Motor type: 15 kW 415 V 50Hz 3 ph. 4 poles
Inlet Octave Band L Inlet L1
Hz Lutv L°1
Ref. Put. [Pal Q [m3fuJ 63 125 250 500 1K 2K 4K 8K dB)A) dB
a 50 15.63 92 93 94 103 98 94 91 91 104 106
b 374 13.34 89 90 96 103 101 99 94 91 106 107
c 548 11.40 89 92 102 109 106 103 96 91 110 112
d 673 6.69 99 99 111 106 102 98 92 87 108 113
If) Inlet Sound Power Level, A - weighted(2) Inlet Sound Power Level, on - weighted
NICOTRA FANS & BLOWERS MFG SDN BHDcertifies that the fan Shown herein IS licensed to bearthe AMCA Seal for Sound and Air Performance.The ratings Shown are based on tests and proceduresperformed in accordance with AMCA Publication 211and AMCA Publication 311 and comply with therequirements of the AMCA Certified Ratings Program.
Performance certified is for Installation Type D: Ducted Inlet -
Ducted Outlet. Speed (RPM) shown is nominal. Performanceis based on actual speed of test. Performance ratings do notinclude the effects of appurtenances (accessories).Power rating W is motor input power.The Sound Power Level ratings shown are in decibels referredto 10.12 watts calculated per AMCA 301. Values shown are forInlet Lwi & LwiA sound power levels for Installation type D: DuctedInlet - Ducted Outlet. Ratings include the effect of duct end correction.dBA levels are not licensed by AMCA International.
Air Density (y): 1,20 kg/m3
Installation Type °D°: Ducted Inlet - Ducted Outlet
ADTA 1000/330M/16AL/20° Motor type:330M kW:16 Size:AL V:20° Hz:
0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0
Volume Flow Rate [m3Is]
—
—
—%— -
‘
‘
catalogue CNQO50001J1000/a September 2008
NKOTRA
ADTA I 120/250M/12T/7.5°
I I
I t S
I--I
H/ lj
----—---I-L
L-‘
-ii III I
It’ ItIt !I
Blade AngleHub Dia. and size
Catalogue CNOO5ODOI/1 120/a September 2008
Air Density (y): 1.20 kg/rn3
Installation Type ‘D’: Ducted Inlet - Ducted Outlet
ADTA 1120/250M/12T/7.5° -12 blades 7.5 Installation - Inst. TypeD”
Motor type: 5.5 Kw 380 V 60 Hz 3 ph. 6 poles
Inlet Octave Band L1 Inlet L.,
Hz L,AtrI L In
Ret. PsI. Pa] 0 [m3ls] 63 125 250 500 1K 21< 4K 81< dB(A) dB
a 0 10.80 80 82 92 94 97 96 96 83 102 103
b 211 8.42 81 90 96 106 104 97 94 80 107 109
c 368 5.99 85 100 104 106 100 95 91 78 106 109
d 454 4.79 86 94 100 96 94 91 87 78 99 103
(1) Inlet Sound Power Level. A-weighted
(2) Intel Sound Power Level on -weighted
NICOTRA FANS & BLOWERS MFG SDN BHDcertifies that the fan shown herein is licensed to bearthe AMCA Seal for Sound and Air Performance.The ratings shown are based on tests and proceduresperformed in accordance with AMCA Publication 211and AMCA Publication 311 and comply with therequirements of the AMCA Certified Ratings Program.
Performance certified is for Installation Type D: Ducted Inlet -
Ducted Outlet. Speed (RPM) shown is nominal. Performanceis based on actual speed of test. Performance ratings do notinclude the effects of appurtenances (accessories).Power rating W is motor input power.The Sound Power Level ratings shown are in decibels referredto 10.12 watts calculated per AMCA 301. Values shown are forInlet Lwi & LwiA sound power levels for Installation type D: DuctedInlet - Ducted Outlet. Ratings include the effect of duct end correction.dBA levels are not licensed by AMCA International.
NICOTRA
Fan Type: ADTA 1120/250M/12T17.5° Motor type: IEC B3 Speed (rpm): 1173 (nominal)Hub: 250 kW: 5.5 Poles: 6Number of blades: 12 Size: 132M Amp Max: 12.4Blade type: T V: 380 / 3— Prot.: IP 55Pitch: 7.5° Hz: 60 Ins. Cl.: F
:_z
-
-
zJzzzzzzzzz::EZEZEEEZZZZZ
EE1
550
500
450
400
0
250
200(‘:3
150
100
50
0
5400
5200
5000
0 4800
4600
4400
4200
4000
3800
3600
3400
0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0
Volume Flow Rate [m3Is]8.0 9.0 10.0 11.0 12.0
catalogue coosoooiii 120/a September 2008
NtCOTRA
ADTA 1250/250M/12T/20°
(C
1
ioao
i6i11/r -ii / 111F—-j
II, II------iIliI—
flF___j
II
-j
Blade AngleHub Dia. and size
24 HOLES 012 Hz
Catalogue CNOO50001/1250/a September 2008
Air Density (y): 1.20 kg/rn3
Installation Type “D”: Ducted Inlet - Ducted Outlet
Fan Type: ADTA 1250/250M/12T/20° Motor type: IEC B3 Speed (rpm): 1186 (nominal)Hub: 250 kW: 22 Poles: 6Number of blades: 12 Size: 200L Amp Max: 43.8Blade type: T V: 380 / 3— Prot.: IP 55Pitch: 20° Hz: 60 Ins. Cl.: F
600
550
500
450Ct,
4000)
350C’)
300
250C-)
200C/)
150
100
50
0
21000
20000
19000
18000
17000
16000
.%- — — — — — — — — — — — — — — — — — — — — —
:::E::::::z::a)::
0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0
Volume Flow Rate [m3Is]
:zzzzzzzzzz:szz:-——-———————————
.4—,
ADTA 1250/250M/12T/20 -12 blades 20 Installation - Inst. Type D”
Motor type: 22kW 380 V 60 Hz 3 ph. 4 poles
Outlet Octave eavd L00 Outlet Lwo
Hz L0A Lwu°
Ref. Put. [Pal 0 [m3/s[ 63 125 250 500 1K 2K 4K 8K dB(A) dB
a 0 27.37 98 88 101 98 99 95 95 91 103 106
b 224 23.60 97 89 101 102 102 101 97 91 107 108
C 378 20.06 94 93 106 108 106 103 97 90 111 113
d 484 16.44 100 103 110 108 106 102 95 89 111 114
[1)Outlet SounO Power Level, A-weighted
[21 Outlet Sound Power Level, un - weighted
NICOTRA FANS & BLOWERS MFG SDN BHDcertifies that the fan shown herein is licensed to bearthe AMCA Seal for Sound and Air Performance.The ratings shown are based on tests and proceduresperformed in accordance with AMCA Publication 211and AMCA Publication 311 and comply with therequirements of the AMCA Certified Ratings Program.
Performance certified is for Installation Type D: Ducted Inlet -
Ducted Outlet. Speed (RPM) shown is nominal. Performanceis based on actual speed of test. Performance ratings do notinclude the effects of appurtenances (accessories).Power rating W is motor input power.The Sound Power Level ratings shown are in decibels referredto 10.12 watts calculated per AMCA 301. Values shown are forOutlet Lwo & LwoA sound power levels for Installation type D: DuctedInlet - Ducted Outlet. Ratings include the effect of duct end correction.dBA levels are not licensed by AMCA International.
MCOTRA
catalogue cNoo5000l/1 250/a September 2000
Fan Type:Hub:Number of blades:Blade type:Pitch:
2000
1800
1600
1400
1200
Cl)
1000
o 800
(‘3U)
400
200
0
ADTA 1400/1 1-1 1/D/8°11—1111D80
Motor type: IEC C4kW: 30Size: 200LV: 380/3—Hz: 60
Speed (rpm): 1782 (nominal)Poles: 4Amp Max: 57.0Prot.: IP 55Ins. Cl.: F
ADTA 1400/11-11/D/8 -11 blades 8 Installation - Inst. Type “D”
Motor type: 30 kW 380 V 60Hz 3 ph. 4 poles
Outlet Octeve Bend L Outlet L00
Hz L ui
Ref. Put. [Pa] 0 [m3/s] 3 125 250 500 11< 21< 41< 91< dB(A) 46
a 0 13.86 104 99 114 114 114 110 111 109 119 120
b 221 12.46 103 98 115 114 113 109 110 108 118 120
C 745 9.62 102 95 110 109 109 107 107 105 115 116
d 1540 5.82 98 93 108 104 105 105 105 102 112 113
(1) Outlet Souno Power Level, A- weignted(2) Outlet Sound Power Level en - weighted
NICOTRA FANS & BLOWERS MFG SDN BHDcertifies that the fan shown herein is licensed to bearthe AMCA Seal for Sound and Air Performance.The ratings shown are based on tests and proceduresperformed in accordance with AMCA Publication 211and AMCA Publication 311 and comply with therequirements of the AMCA Certified Ratings Program.
Performance certified is for Installation Type D: Ducted Inlet -
Ducted Outlet. Speed (RPM) shown is nominal. Performanceis based on actual speed of test. Performance ratings do notinclude the effects of appurtenances (accessories).Power rating W is motor input power.The Sound Power Level ratings shown are in decibels referredto 10.12 watts calculated per AMCA 301. Values shown are forOutlet Lwo & LwoA sound power levels for Installation type D: DuctedInlet - Ducted Outlet. Ratings include the effect of duct end correction.dBA levels are not licensed by AMCA International.
Air Density (y): 1.20 kg/m3
Installation Type “D”: Ducted Inlet - Ducted Outlet
N1COTRA
——--———-1
:czz:-—--—
.————————--
— — — — — — — — — — — — — — — — — S., — — — —
._______J_______________ -
-—--———---——--——--—
1c)
-—— ————— ———— ———— ————s —
.—— ——-i——— ———— ———-- 5% —
- — — —
— 7— — — — — — — — — — — — — — — — —— —
:zzz:z----—---——=r---%.--r
31000
i_ 30000ci)
29000
28000-Q
27000
150 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Volume Flow Rate [m3Is]
-— — — — — — — = :: — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — —
-——----———--——-—-----———--—--
-————---———--——-——---———--,--
z:::z:z:-————---———-- --———--——-
-————----———--
-—————————————
catalogue cNoo5oDoln 405/a September 2008
NKOTRA
ADTA 1600/7-1 1/D/8°
px.zc1i
1250
N CD CD —
a a
Blade AngleHub Dia. and size
Catalogue CN0050001/1 600/a September 2008
Air Density (y): 1.20 kg/rn3
Installation Type D”: Ducted Inlet - Ducted Outlet
ADTA 1600)7-11 /DI8 - 7 blades 8° Installation - Inst. Type 0
Motor type: 30 kW 380 V 60Hz 3 ph. 4 poles
Outlet Octave Band L Outlet L
Hz L0A’1 L
Ref. PsI, IPal 0 [m3/oj 63 125 250 500 1K 2K 4K 8K dB(A) dB
a 0 17.66 102 109 118 121 116 112 110 110 122 124
b 273 14.39 100 103 116 117 114 111 109 108 119 121
C 671 9.91 95 97 117 114 113 111 108 108 118 121
d 1018 4.96 94 97 119 111 110 110 107 105 117 121
(1) Outlet Sound Power Level, A- weighted(2) Outlet Sound Power Level, an- weighted
NICOTRA FANS & BLOWERS MFG SDN BHDcertifies that the fan shown herein is licensed to bearthe AMCA Seal for Sound and Air Performance.The ratings Shown are based on tests and proceduresperformed in accordance with AMCA Publication 211and AMCA Publication 311 and comply with therequirements of the AMCA Certified Ratings Program.
Performance certified is for Installation Type D: Ducted Inlet -
Ducted Outlet. Speed (RPM) shown is nominal. Performanceis based on actual speed of test. Performance ratings do notinclude the effects of appurtenances (accessories).Power rating W is motor input power.The Sound Power Level ratings shown are in decibels referredto 1 0.12 watts calculated per AMCA 301. Values shown are forOutlet Lwo & LwoA sound power levels for Installation type 0: DuctedInlet - Ducted Outlet. Ratings include the effect of duct end correction.dBA levels are not licensed by AMCA International.
NICOTRA
Fan Type: ADTA 1600/7-11/D/8° Motor type: IEC C4 Speed (rpm): 1782 (nominal)
Hub: 7-11 kW: 30 Poles: 4Number of blades: 7 Size: 200L Amp Max: 57.0Blade type: D V: 380 / 3— Prot.: IP 55
Pitch: 80 Hz: 60 Ins. Cl.: F
1200
1000
(‘3P. 800‘3)
Cl)600
c)
(‘3 400(I)
200
33000
31000
29000D.0
27000
25000
23000
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13
Volume Flow Rate [m3!s]14 15 16 17 18 19 20
catalogue CNOO50001/1 600/a September 2008
NICOTRA FANS & BLOWERS MFG SDN BHD - KEPONG - 52000 KUALA LUMPURLot 33, Jalan 5132A Kepong Industrial Area - Batu 6 112 -
Tel. +6-03-62573336 Fax +6-03-62579337 E-mail: [email protected]