azza-gt1 (1129-02) 說明書1 (optional up to 5) 1 (optional up to 5) 9 2x usb 3.0, 2xusb 2.0, hd...
TRANSCRIPT
CSAZ-GT1www.azzatek.com
EASY SWAP RADIATORREADY
INSTALLTION GUIDE
Installation Instructions
1. Motherboard Tray Handle installation
2. Side Panel Disassembly
3. Front Panel Disassembly
4. Top Panel Disassembly
5. Bottom Panel Disassembly
6. Motherboard Tray Removal and Installation
7. Power Supply Installation
8. Motherboard, CPU and Graphics Card Installation
9. 5.25” Device Installation
10.3.5” HDD and 2.5” HDD/SSD Installation
11.How to Remove Fan Nylon Rivet
12.Fan Dust Filter Removal
13.Water Cooling Radiator Installation
14.Graphics Card Support Bracket Installation
15.Front Connectors Installation Guide
Model:
Model Name:
Model Number:
Spec:
Type:
Color:
Material:
Side Panel Window:
Power Supply:
CPU Cooler Compatibility:
Motherboard Compatibility:
Power Location
Expansion:
External 5.25" Drive Bays:
Internal 3.5" Drive Bays
Easy Swap 2.5" SSD Slot
Easy Swap 3.5" HDD Slot
Expansion Slots:
Front Ports:
Cooling System:
230mm Fan:
140mm Fan:
120mm Fan:
Physical Spec:
Dimensions (HxWxD)
Weight
GT 1
CSAZ-GT 1
ATX Full Tower
Black/Black (inside chassis)
0.8mm SECC
Yes
Not Included
up to 200mm
XL-ATX,E-ATX, Full ATX, Micro ATX
Rear Bottom
9
7
1 (optional up to 5)
1 (optional up to 5)
9
2x USB 3.0, 2xUSB 2.0, HD Audio/ Mic
1x230mm Blue LED Silent Fan (24DBA)
1x140mm Silent Fan (19DBA)
1x120mm Fan in Rear, 1x120mm on the
Side to Cool HDD
24.4"x9.8"x23.2" (620mmx250mmx590mm)
30 lbs
Specifications
1.2.3.4.5.6.7.8.9.
10.11.12.13.14.
Top CoverLeft Side PanelFront Bezel5.25”Device Cover x93.5”HDD, 2.5” SSD/HDD Holder x5Bottom Dust FilterBottom StandRight Side Panel5.25” Tool-less Retaining ClipsMotherboard Tray Handle2x140mm Silent Bottom Fans2x120mm Side Fans/1x120mm Rear FanSide 230mm Fan (optional)2x230mm Top Fans
List of Parts
65
1,4
2
605,21241,26
Side:1 x 120mm Silent Fan (24 dBA)Bottom:1 x 140mm Silent Fan (19 dBA)Top: 1 x 230mm LED Silent Fan (24 dBA)Back : 1 x 120mm Silent Fan (24 dBA)
Air Cooling System
Diagram
Figure
Assembly kit
Parts Name Quantity
Screw for Motherboard
Screw for Graphics Card Bracket
Motherboard Tray
Screw for2.5’’ SSD
Screw for 3.5’’ HDD
Power Supply Screw
Screw for HDD Bracket
Speaker
Cable Tie
Pad for Power Supply
Graphics Card Support Bracket M1 (metal)
Graphics Card Support Bracket M2 (metal)
Graphics Card Support Bracket P1 (Plastic)
12
2
6
16
16
30
1
10
2
1
4
4
Graphics Card Support Bracket Assembly Parts
Installation Instructions
1.Motherboard Tray Handle Installation
2.Side Panel Disassembly
3.Front Panel Disassembly
4.Top Panel Disassembly 5.Bottom Panel Disassembly
1.1 Tighten the screws to secure the handle to the motherboard tray
2.1 Unscrew the thumb screws on the back of the chassis2.2 Pull the side panels toward the back of the chassis
* When the motherboard is rotated 180 degree, the two side panels will need to be swapped
3.1 Hold the bottom of the front panel, and remove the front panel as shown in the figure
4.1 Remove the top panel as shown in the figure 5.1 Loosen the screws on the bottom panel5.2 Remove the bottom panel
6.Motherboard Tray Removal and Installation
7.Power Supply Installation
6.1 Unscrew the thumb screws on the rear and the side of the motherboard6.2 Pull the motherboard tray out of the chassis 6.3 Rotate the motherboard tray 180 degrees6.4 Gently slide the motherboard tray back into the chassis6.5 Secure the motherboard tray with the provided screws
* To provide better cooling performance, the suggested orientation of the graphics card is at the top of the case. The motherboard tray can be rotated 180 degrees to revert to the standard AXT form factor.
7.1 Rear power supply installation7.2 Place the power supply into its proper location and tighten the screws
8.Motherboard, CPU and Graphics Card Installation
8.1 Unscrew the thumb screw and pull out the motherboard tray from chassis8.2 Lay the motherboard tray on a flat surface8.3 Install the I/0 shield that comes with your motherboard package8.4 Secure the motherboard to the standoffs on the motherboard tray8.5 Install the graphics card on the motherboard and secure the graphics card to the expansion slot with the provided thumb screw
9.5.25” Device Installation
10.3.5” HDD and 2.5” HDD /SSD Installation
9.1 Pinch the 5.25” drive bay metal mesh to remove it from the front panel9.2 Slide the 5.25” drive into the appropriate bay until the latch locks into place9.3 To remove the 5.25” device, please push on the lever and push the device out
10.1 Connect the 4pin Molex connectors from the power supply to the Easy Swap Molex connectors10.2 Connect the SATA connectors from the motherboard to the Easy Swap SATA connectors10.3 Pinch the 5.25” drive bay metal mesh to remove it from the front panel10.4 While pressing on the lever, pull the HDD tray out and place the 3.5” HDD or 2.5” SSD/HDD on the tray and secure with screws10.5 Slide the HDD tray into the appropriate bay until the latch locks into place then put back the 2.25” metal mesh cover
Warning: The computer must be turned off before you install or remove an HDD from an Easy Swap bay
11.How to Remove Fan Nylon Rivet
11.1 Pull the nylon rivets out to remove these fans11.2 Push in the nylon rivets to replace these fans
12.Fan Dust Filter Removal
13.Water Cooling Radiator Installation
14.Graphics Card Support Bracket Installation (Present-day graphics cards are increasingly heavier in weight, placing greater strain on the PCI-E slots. To help reduce such strain, we are providing a graphics card support bracket.)
12.1 Unscrew the thumb screws from the bottom front of the chassis and remove the dust filter12.2 Remove the fan dust filter by pressing down on the tab then pull out12.3 Clean the dust filter using a clean cloth
13.1 To install an external water cooling system, use the pre-drilled holes located on the back to connect the tubes13.2 Up to size 480mm radiator may be installed on the top of the unit using the pre-drilled holes
14.1 Assemble M1, M2 & P1 with the thumb screw, do not tighten the thumb screw yet14.2 Secure M1 to the motherboard tray with screws14.3 Adjust P1 position to provide additional support to the graphics card, then tighten the screw to M2
15.Front Connector Installation Guide
Please refer to your motherboard user manual on the sections of “USB connector”And “audio connector”.Please verify the pin definition before connecting the connectors to the motherboard
1. USB and Audio connectors have foolproof design, can only be inserted in one direction2. LED connectors have electrically positive and negative poles