b160 all-in-one rear hub motor user manual
TRANSCRIPT
B160 ALL-IN-ONE Rear hub motor User Manual
浙江超级电气科技有限公司 Zhejiang Chaoji Electric Tech. Co.,Ltd
1. Greeting Thank you for your trust in Keyde®.
We will provide you with the highest quality products and the most considerate
service as ever.
2. Parts List Item No. Specification Model Quantity
1 ALL-IN-ONE rear hub motor B160SWXCR30 1
2 Charger 30LB2.5A 1
3 Accessories
Switch cap 2
Flywheel sleeve 1
Gasket 4
Flange nut 2
4 User Manual 1
3. Installation
3.1 Install the rear wheel
① Turn the E-Bike upside down carefully ※ Note: Do not install the switch nut in advance
② Place the rear wheels in the correct direction:
③ Tap the shaft at both ends with a rubber hammer until the bottom of the
groove
④ Tighten the switch nut
⑤ put the E-Bike upright carefully
B160 ALL-IN-ONE Rear hub motor User Manual
浙江超级电气科技有限公司 Zhejiang Chaoji Electric Tech. Co.,Ltd
3.2 Connect with mobile APP
3.2.1 Download the APP by visiting the website www.keydesmart.com or scanning
the QR code with your mobile phone
IOS Android
3.2.2 APP guide
3.3.3 APP Instructions
① Before riding, please make sure the mobile phone is firmly fixed
② The APP can still ride in front gear when disconnected
③ APP can only connect one to one
B160 ALL-IN-ONE Rear hub motor User Manual
浙江超级电气科技有限公司 Zhejiang Chaoji Electric Tech. Co.,Ltd
4. Notes
4.1 Battery
The battery is built into the motor and cannot be removed. The battery is
equipped with a BMS battery protection system. When the temperature is too high,
the voltage is too low, or the current is too large, the battery will be
automatically switched to the protection mode to stop the power supply. After a
period of time, the protection state will be automatically released.
Charging temperature: 0 ~ 45 ℃
Operating temperature: -20 ~ 60 ℃
Storage temperature: -20 ~ 50 ℃
4.2 Charger
4.2.1 Charging method Park the bicycle near the power socket, unscrew the switch nut, insert the round charging
plug of the charger into the charging socket, and connect the other end to a 100-240V power
supply.
4.2.2 Indicator description
Charger lights red: charging in progress
Charger lights green: charging is complete
The charger light is flashing: the battery voltage is too low and is trickle
charging.
After the voltage returns to a safe value, the charger will automatically
increase the charging speed.
4.2.3 Notes:
① Do not use any other brand charger to charge the motor
② Please charge in an environment where children cannot touch
③ The charger contains a high-voltage circuit. Do not disassemble it by
yourself.
④ During use and storage, prevent liquid and metal filings from penetrating
into the charger.
Drop and impact to prevent damage
⑤ Do not cover anything when the charger is charging
⑥ Please use the charger in a dry and ventilated indoor environment as much
as possible.
⑦When you smell an odor or the temperature is too high during charging, please
stop charging immediately, and sent to the dealer for repair
B160 ALL-IN-ONE Rear hub motor User Manual
浙江超级电气科技有限公司 Zhejiang Chaoji Electric Tech. Co.,Ltd
5. Failure guide Error code Fault description Solution
Under voltage Battery voltage is too low to charge
Temperature Motor temperature is too high cooling before using
Overcurrent Motor load is too large 5s overcurrent protection is cancelled
after the motor stops
MOS Motor MOS abnormal Return to the dealer to solve
6. Warranty terms
6.1 Product warranty time
Warranty period from the date of purchase:
Motor: 2 years;
Charger: 1 year
6.2 Disclaimer
◎ No warranty will be provided for failures caused by:
① Not used in accordance with the instructions
② Damage caused by human factors
③ Use this motor for other purposes
④ Unauthorized disassembly and assembly of the motor
⑤ Use parts other than the original
⑥ Traffic accident or other accidental damage
Repairs not carried out by our company