b200 avidyne multifunction display

8/15/2019 B200 Avidyne Multifunction Display

1/13

C a r e n a d o C o p y r i g h t s 2 0 1 2

a l l r i g

h t s r e s e r v e d


2/13

1) BRT Button - Toggle screen brightness for day or night mode.

2) PWR Button - Toggles unit power on/off.

3) Sofkkeys - Functionality shown by labels on screen.

4) Left Knob - Functionality shown by label on screen.

5) Right Knob - Functionality shown by label on screen.

Buttons

2

1)

3)

2)

3)

4) 5)


a l l r i g


NOT INTENTED FOR REAL FLIGHTS.


3/13

-ENGINE POWER LOSS IN FLIGHT


-

1) Traffic Button - Toggle between Display Off, Normal, and No Labels.

2) View Button - Toggle between Center, North Up and Forward views.

3) Declutter Button - Toggle between 4 levels of declutter. declutter settings can be changed

in the AUX page.

4) BaseMap Button - Toggle between No map, Base Map only, and Terrain Map.

5) Left Knob label - Changes current page.

6) Right Knob label - Adjusts the map Range 7) Current aircraft position.

8) Terrain Coloring legend

9) Data Block - Shown information can be changed in the AUX page.

10) Active Flight Plan leg - Inactive legs are shown in white.

11) Track Indicator Arrows - Desired Track (magenta), Heading (cyan), Actual Track (green)

12) Current Heading

13) Orientation indicator

14) Range from aircraft to compass rose as displayed on map.

15) WX Button – Toggle weather (cloudiness) information.

Map Page

Radar

3


a l l r i g




4/13


-

1) Azimuth Lines button - Toggle azimuth lines on off.

2) Left Knob label - Changes current page.

3) Right Knob label - Adjusts the map Range

4) Current aircraft position.

5) Current range setting

6) Current Heading7) Range from aircraft to outer arc as displayed on map.

* Red coloring indicates terrain levels that are in close proximity to aircrafts current altitude.

* Yellow coloring indicates terrain levels that are in medium proximity to aircrafts current altitude.

Taws Page

Radar

4


a l l r i g




5/13

* Upper information bar shows Ground Speed, Current Track, Course Deviation Indicator, and

current time.

* Flightplan List shows current leg, and remaining legs. Legs already flown are removed from

the list.

* List information show waypoint name, Bearing to waypoint (current leg only), Desired Track,

Distance to waypoint, Estimated time enroute, and estimated time of arrival.

* Info softkey will bring up an information page for the destination airport (see next section).

* Left Knob changes pages* Right Knob scrolls trough the list. Arrows along the left edge of the screen will indicate if the

list is longer than displayed.

Trip Page

Radar

5


a l l r i g




6/13

* Upper information bar is the same as in the trip page.

* Left box shows airport runways and airport elevation.

* Right box shows frequencies and runway information (scroll down to see runways)

* Back to Trip softkey returns to previous page.

* Left Knob (Jump) scrolls list to bottom.

* Right Knob (Step) scrolls list slowly.

Airport Information

6


a l l r i g




7/13


8/13

* Airport Filter Softkey - brings up airport filter page.

* Declutter Setup softkey - brings up declutter setup page.

* Data Blocks softkey - brings up data blocks setup page.

* System Time softkey - brings up system time setup page.

* Left Knob changes pages

* Right Knob has no function.

Aux Page

Radar

8


a l l r i g




9/13

* The pages allows you to adjust what type airports are displayed on the main map.

* Save softkey saves the current settings and returns to Aux page.

* Cancel softkey returns to Aux page without saving changes.

* Left Knob changes current setting.

* Right Knob selects setting to change.

Airport Filter

9


a l l r i g




10/13

* NOTE: These settings affect only the currently set Declutter Level, as indicated on the top of

screen.

* Display can be toggled between, On with Label, On without Label, Off, Auto with label, or Auto

Without Label.

* When display is set to on, the item will always be displayed, withing limits of the map. The max

range or the particular item is indicated by the filled dots.

* When display is set to Auto, the item will be displayed dependant on your range setting in the

map, as indicated by the dots.* When display is set to off, the item will never be displayed on the map.

* IFR Defaults softkey sets display suitable for Instrument Flight Rules

* VFR Defaults softkey sets display suitable for Visual Flight Rules.





Declutter Setup

10


a l l r i g




11/13

* Data fields available to display on the main map are shown at the top of the page.

* When line 1 is set to a double height data block, line 2 cannot be changed.

* When line 2 is set to a double height data block, line 3 cannot be changed.

* Line 3 cannot be set to a double height data block.

* Factory Defaults softkey restores to farctory settings.



* Left Knob changes current setting.* Right Knob selects setting to change.

Data Block Setup

11


a l l r i g




12/13

* Time source can be set to Auto or GPS. This make no difference in Flight Simulator.

* Time zone can be adjust to any whole hour offset.

* Menu timeout hides the softkey labels on the map pages after set amount of time.





System Time

12


a l l r i g




13/13

This page shows weather (cloudiness) information alone.

IMPORTANT: For performance purposes, weather information on Map page and Radar page, is

only shown in the virtual cockpit instrument. It is not shown in the 2D pop up window.

Radar Page


a l l r i g



b200 avidyne multifunction display

Documents