BAHLED Wall Mount Prison Grade

* Delivered Lumens shown were tested with 4000K LEDs and ASR (asymmetric/symmetric grid) lens.

SPECIFICATIONSDESCRIPTION

The BAH LED combines maximum security construction with energy saving technology. The BAH utilizes one piece clamshell housing as well as security lensing and tamper resistant fasteners for impact resistance and prevent contraband concealment and unwanted fixture penetration. The BAH is ideal for confinement/security applications. Suitable for use in inmate cells,psychiatric wards, secure corridors and general population areas. UL listed for damp locations. Available in continuous runs, use option BAHCR.

FASTENERSStainless steel tamper-resistant T20 TORX screws standard. Allen-head screws with center reject pin optional.ELECTRICAL SYSTEM0-10V 1% dimming driver included standard. Long-life LED system rated for >100K life hours (L70 @ 25°C). Complies with federal energy efficiency standards.

OPTICAL SYSTEM

Various choices of inner and outer lenses. If additional lens options are required, consult factory.

LISTINGS

UL listed for damp locations. Wet location optional.

FINISH

High gloss, electrostatically applied, white powder coat finish, average minimum reflectance 92%. Anti-microbial paint optional.

HOUSINGVarious housing material options, consult factory if additional options not listed are needed. 14 Gauge backplate standard. Clamshell design with continuous welded and ground ends to form a one-piece, seamless, doorless housing which maximizes impact resistance and prevents contraband concealment as well as unauthorized fixture penetration. Two stainless-steel aircraft cables attach housing to back plate.

LED80 CRI or 90 CRI LEDs available in 2700K, 3000K, 3500K, 4000K and 5000K. Life is >100,000 hours at 70% lumen maintenance.BACKPLATEDie-formed 14 ga. steel backplate forms an irretrievable blade trap to prevent contraband concealment.

WARRANTY5 - Year Limited Warranty. Complete warranty and terms located at: www.aelnow.com/warranty

Output Delivered Lumens System Wattage L70 @20C (hrs)SL 4650 33ML 7974 57 5000K 1.03HL 11150 80 4000K 1SM 12040 86 3500K 0.97MM 13016 93 3000K 0.94HM 15728 112 2700K 0.91

>100K>100K>100K>100K>100K>100K

Approximate ColorTemperature Multiplier

817) 468-3591 08/04/2020

10-5/16"

7-7/16"

STANDARD OPTIONAL

Catalog Number

Project

Type

817) 468-3591 08/04/2020

BAH2 2'

M 120/277V

SL Standard Low 27 2700K

12EBLAMBNTP

AHLNFZ90WLVDO

BAHCR

BAH4 4' ML Medium Low 30 3000K

B14

HL High Low 35 3500K

B16

SM Standard Medium 40 4000K

SH14

MM Medium Medium 50 5000K

SH16

HM High Medium

SH18

14 Gauge Cold Roll Steel16 Gauge Cold Roll Steel18 Gauge Cold Roll Steel 14 Gauge Stainless Steel16 Gauge Stainless Steel18 Gauge Stainless Steel

SH Standard HighMH Medium HighHH High High

1200 Lumen Emergency BallastAnti-microbial Matte White Paint Brushed (Stainless Steel Only)Non-tamper Proof Fasteners(Phillips-head screws)Allen Head Screws With Center Pin Reject LED Night LightFuse Holder90 CRIWet LocationLutron Vive integral fixture controller(RF with daylight and occupancy sensing)Continuous Run Ready

SL Standard Low 27 2700K 125C 125PML Medium Low 30 3000K CP56 187PHL High Low 35 3500K CP87 25P

.125 Clear Polycarbonate

.187 Clear Polycarbonatee

.250 Clear PolycarbonateSM Standard Medium 40 4000K TG

.125 Prismatic Acrylic

.156 Prismatic Polycarbonate

.187 Prismatic Polycarbonate

.156 Prismatic Tempered Glass 500P .500 Clear PolycarbonateMM Medium Medium 50 5000K F1HM High Medium G1SH Standard High H1MH Medium High I1

.187 Clear Tempered Glass

.250 Clear Tempered Glass

.375 Clear Tempered Glass

.500 Clear Tempered GlassHH High High

OPTIONS

OUTER LENSDOWN LIGHT ILLUMINATION LEVEL DOWN LIGHT CCT INNER LENS

HOUSING DRIVER

SERIES

VOLTAGE

UP LIGHT ILLUMINATION LEVEL UP LIGHT CCT

B18

BLANKCD5EDNFLDDLDE1

LDE5

0-10V 1% Dimming Driver (included standard) 0-10V 5% to off Dimming DriverElectronic Driver Non-DimmingFifth Light Dali, DimmingLutron Hi-lume 1% EcoSystem LED driver with Soft-on, Fade-to-Black dimming technology Lutron LDE5 5-Series Ecosystem 5% Dimming

MOUNTING DIMENSIONS

6.0

0 2.25

15.188

50.00

15.188

0.56 X 0.85 0.56 X 0.85

15.188

26.25

6.0

0

2.25

BAH2BAH4