bahco 1000v insulated tools

Download Bahco 1000V Insulated tools

Post on 12-May-2015

1.532 views

Category:

Documents

4 download

Embed Size (px)

TRANSCRIPT

  • 1.INSULATED TOOLSYour Safety is our TOP PRIORITY!

2. Your safety is our TOP PRIORITY!Insulated tools from Bahco Our history goes back more than 120 years. Bahco has been developing and marketing professional tools for use in a wide range the world over. Our core values of performance products are well designed and available globally, backed up with local expertise. The full guarantee Bahco offers reach new scope and depth of commitment with its safety tools, with a range of more than 200 insulated tools, one of the widest and most comprehensive range on the market. Our tools are safe All Bahco insulated tools are manufactured according to International IEC60900 standards for working with live systems up to 1000 V AC & 1500 V DC. They fol- low strict quality controls and are subjected to the most stringent tests. Bahco insulated tools comply with the VDE0820 Stan- dards and 63% of the assortment is certied by the German VDE laboratory. The new Bahco 1000 V assortment is adapted to both distributors and end users needs. Durability EffectivenessExcellent Performance User-centered product The IEC 60900development OutstandingSafety VDE Certicate Bahco The best ergonomics ErgonomicsGuarantee Multi-layer coating with Designon the market different colours indica- Accessibility ting safety, danger orhigh danger BroadComprehensive Range 216 references One of the largest assortmenton the market2 3. SafetyGUARANTEEBahco tools all have a high level of technical performance. The materials used are of high quality and they have been carefully Insulated tools from Bahcochosen and tested in order to guarantee safety and durability. We are one of the few hand-tool manufacturers who make thetools and the insulation in-house, both the PVC dipped insulated version (most of the tools) and the handle version (pliers,screwdrivers).Each tool is tested to 10000 V for a period of 10 seconds, thus guaranteeing safety during live work.High performance and quality materials.The ame does not spread.Black tip protectsCan perform between -20 C and +70 C.against impact. Laser markedtotally indelible. Yellow layer indicating high danger.Red layer indicating safety.Orange layerindicating danger. Routine tests in accordance to IEC60900 specificationDielectric testRetaining force testThe tools are immersed in water for 24 hours.This test is applied only to tools which canA voltage of 10kV is then continuously applied be assembled. The test consists of applyingfor 3 mins. The test is considered successfula force of 50 N to try to separate both parts.if no electrical puncture, spark over or asho-After a minute, both parts should stay assem-ver occurs during the test period and if the li- bled.mits of leakage current are not exceeded.Impact testPermanent marking durabilityThe tool is cooled at -25 C for two hours.The markings are rubbed for 15 s with a ragAfterwards, a special hammer applies force soaked in water, and then for 15 s with a ragon the insulating layer. The test is consideredsoaked in isopropanol. After this process, thesuccessful if the insulating material shows no marking should be legible.breaks.Insulation adhesion test Penetration testThe tools are conditioned at a temperature ofThe insulating surface is pressed with a70 C for 168 h. A force of 50 N is applied in special device. A voltage of 5000 V is thenthe direction of the line dividing the insulatingapplied to the tool for 3 minutes. The test ismaterial coating from the conductive part forconsidered successful.3 min. During this test the insulation materialmust stay rmly attached to the basic tool.Flame test Visual and dimensionalThe test is considered as passed if the ame The tool (in particular the insulation) is visuallyheight on the tool does not exceed 120 mmchecked and should be free from external de-and there is no leakage of insulated materialfects. The marking should be perfectly legiblein fusion. and the dimensions should be in accordance with the standard. IEC60900* * 63% of Bahco insulated tools are Certied by the German VDE laboratory3 4. 1000 V PLIERS4 5. Side cutting pliers Side cutting pliers dipped insulation 1 component insulated handles up to 1000 volts 3 layers of insulation coating with different colours plus a 4th one in black to Designed to cut hard material such as piano wire close to the joint and further protect handle edges. Red: safety. Orange: danger. Yellow: high dangerto cut softer material such as copper wire and plastic insulated wire Cuts from 0.5 mm soft wire to 1.6 mm hard wire 1000 V Pliersat the tip Chrome plated nish Shaped jaws give improved accessibility in conned spaces ISO: 5749, DIN: 5749 Finish: Black oxidised, anti-corrosion treatedISO: 5749, DIN: 5749 Product code L mm A mmB mmC mm Weight g2171V-160 160 222012 1.6221 Product code L mm A mm B mmC mm Weight g2171V-180 180 242212 2.0267 2101S-14014019.51691.6 156 2101S-16016021.518 101.8 202 2101S-18018023.520 112.0 300 2101S-20020025.522 11 2.25 388 Wire types for cutting capacity WIRE TYPE TENSIBLE STRENGTH mm Cu - 230 N/mm2 0.51 W Soft wire Bronze - 780 N/mm2 1.25 1.5 Medium hard wireM 1600 N/mm2 1.6 Spring wireHeavy duty side cutting pliers 1.4dipped insulationHard wire1.6 H 2100 - 2250 N/mm2 3 layers of insulation coating with different colours plus a 4th one in black toPiano wire 1.82 further protect handle edges. Red: safety. Orange: danger. Yellow: high dangerThe variety between soft and piano depends on the tensile strength of the Cuts piano wirewire which of course is related to the material properties (copper, brass, Chrome plated nishiron, steel, etc). Then in each wire type we can nd a large variety of ISO: 5749, DIN: 5749thicknesses (diameters). More than the ones shown in this small chart. Product codeL mmA mmB mmC mmWeight g2191V-180180 2520122.02622191V-200200 2621122.5290Bahco cutting pliers enjoy better cutting capacityEnd cutting pliersto other pliers 3 layers of insulation coating with different colours plus a 4th one in black to CUTTING EFFORT COMPARATIVE TEST BAHCOfurther protect handle edges. Red: safety. Orange: danger. Yellow: high danger OTHERS Cuts from 1.0 mm soft wire to 1.6 mm hard wire CUTTING EFFORT (N) Chrome plated nishISO: 5748 DIN: 5748 Product codeL mmA mmB mmC mmWeight g 527V-160 160 27 724 1.6270 CUTS 527V-200 200 32 827 2.04405 6. Combination pliersCombination pliers dipped insulation 1 component insulated handles up to 1000 volts 3 layers of insulation coating with different colours plus a 4th one in Edges specially designed to cut hard material such as piano wire andblack to further protect handle edges. Red: safety. Orange: danger.spring steel wire Yellow: high danger Gripping surfaces particularly suited for gripping round and at material Cuts from 1.0 mm soft wire to 1.6 mm hard wire1000 V Pliers Finish: Black oxidised, anti-corrosion treated Chrome plated nishISO: 5746 DIN: 5746 ISO: 5746 DIN: 5746 Product codeL mm A mmB mm C mmWeight g Product codeL mm A mm B mm C mm Weight g 2678V-160160 23 33 11 1.8 250 2628 S-180 1802536 11 2.0 265 2678V-180180 26 37 12 2.0 390 2628 S-200 2002739 12 2.5 310 2678V-200200 29 41 12 2.5 500Snipe nose pliers 1 component insulated handles up to 1000 voltsSnipe nose pliers dipped insulation Slim, semi-circular shaped and serrated jaws 3 layers of insulation coating with different colours plus a 4th one in black to Cutting capacity: 1.6 mm hard steel wirefurther protect handle edges. Red: safety. Orange: danger. Yellow: high danger Accurately machined jaws providing a sure grip on the workpiece Cutting capacity from 1.0 mm soft wire to 1.6 mm hard wire Sharp edges for cutting softer material such as copper wire and plastic Chrome plated nishinsulated wireISO: 5745 DIN: 5745 Finish: Black oxidised, anti-corrosion treatedISO: 5745 DIN: 5745Product code L mm A mm B mm C mm E mm Weight g Product code L mm A mm B mm C mm E mm Weight g2430V-16016016498 2.5 1.6 200 2430V-20020017729 2.5 1.6 205 2430 S-200200177292.5 1.6 200Snipe nose pliers bent tip 60 1 component insulated handles up to 1000 voltsSnipe nose pliers bent tip 60 Tips angled at 60dipped insulation Cutting capacity: 1.6 mm hard steel wire 3 layers of insulation coating with different colours plus a 4th one in Slim, semi-circular shaped and serrated jawsblack to further protect handle edges. Red: safety. Orange: danger. Accurately machined jaws providing a sure grip on the workpiece Yellow: high danger Sharp edges for cutting softer material such as copper wire and Tips angled at 60plastic insulated wire Cutting capacity from 1.0 mm soft wire to 1.6 mm hard wire Finish: Black oxidised, anti-corrosion treated Chrome plated nishISO: 5745 DIN: 5745 ISO: 5745 DIN: 5745 Product code L mm A mm B mm C mm E mm Weight gProduct code L mm A mm B mm C mm E mm Weight g 2427 S-20020017709 21.6 200 2427V-20020017709 2 1.6 2056 7. Flat nose pliers dipped insulation Round nose pliers dipped insulation 3 layers of insulation coating with different colours plus a 4th one in black to 3 layers of insulation coating with different colours plus a 4th one in black tofurther protect handle edges. Red: safety. Orange: danger. Yellow: high dangerfurther protect handle edges. Red: safety. Orange: danger. Yellow: high danger Good grip and improved accessibility in conned spaces Suited for wire-bending work Chrome plated nish Chrome plated nish1000 V PliersISO: 5745 DIN: 5745ISO: 5745 DIN: 5745 Product codeL mmA mm B mm C mm D mmE mm Weight g Product code L mmA mmB mmC mmE mmWeight g 2421V-160 160 16.5 49 8.5 35 205 2521V-160 160 16427 1.5205Wire stripping pliersWire stripping pliers dipped insulation 1 component insulated handles up to 1000 volts 3 layers of insulation coating with different colours plus a 4th one in black to Maximum cable diameter 5 mm; Maximum cable section 10 mm2further protect handle edges. Red: safety. Orange: danger. Yellow: high danger Finish: Black oxidised, anti-corrosion treated Maximum cable diameter 5 mm; Maximum cabl