bahco pliers

1

Pliers forprofessionals

2

In many professions good pliers arejust as essential as nimble fingers.

A professional may make thousandsof cuts every day. This means it isextremely important that the pliersmaintain a high level of quality andhave been ergonomically designed.

Bahco’s range comprises of a largenumber of side cutters, combinationpliers and holding pliers with achoice of handles.

There are pliers for installation,workshop, electronics and finemechanical work.

ElectriciansTelecom installationengineersNetwork installationengineersElectronics assemblyworkersMechanicsPlumbers

Snipe nosed or flat.Round or half round.Long and narrow or

short and strong.Bahco has pliers for both

the tradesmen and the DIY user.

Function

3

Outer jawThe outer jaw is usedfor soft materials suchas cable insulation andcopper wire.

Rounded contoursThe Ergo pliers have nosharp edges that can injureyour hands or sensitivecomponents.

Two-in-oneBahco’s ”two-in-one”side cutters areprogressive ground.

Inner jawThe inner jaw has beenground for cutting hardmaterials, even pianowire.

Maximum accessibilityand precisionwith precision ground cuttingedges and soft jaw contours

Several differenthandle sleevesfor differentdemands

Ergo grip sleevesfor those working intensively and who demandthe best possible ergonomics.

Insulated grip sleevesfor electricians, 1000 V.

Coated plastic handlesfor those who prefer extra flexible handles.

4

Ergo are ergonomic tools based onscientific grounds. Bahco guaranteesthat each tool that carries the Ergomark has undergone a uniquescientific, 11-point testing programmewith regard to ergonomics andfunction.

Included in the programme are testswith a large number of users frommany different professions andindustries. The user groups have thetask of thoroughly testing a prototypeseries of new tools in professionalusage. The results from the tests arethen evaluated by experts in medicine,ergonomics and industrial design.After adjustments, further user testingis performed before the design isregistered and the tool is approved formanufacturing.

The testing programme leads to eachErgo tool having several uniquecharacteristics that increase usabilityand job satisfaction and radicallyreduce the risk of difficult to treat andexpensive occupational injuries.

The Ergo pliersincrease jobsatisfaction, usabilityand personal safety

Ergonomics

The world famous Ergo pliers givethe best grip in all situations.

The pliers are the result ofcomprehensive scientific studies

in how men and women workprofessionally using pliers.

5

Point loads eliminatedTiring point loads are eliminatedas the Ergo grip’s designdistributes the force over alarger area of the hand.

Return springAll Ergo pliers have areturn spring that makesthe work easier, quickerand less tiring. On somepliers the return spring caneasily be engaged anddisengaged.

Rounded contoursAll Ergo pliers have jaws withsoftly rounded contours in order tobe held comfortably in manydifferent ways – for example whenworking with the hands high upover the pliers’ jaws.

Safe gripA soft covering over ahard core is kind to theskin and gives a safe andnon-slip grip.

Long, narrow jaws ofhardened steel thatincrease accessibilityand never lose theirgrip.

Quick and easysetting with justone hand.

Compact Ergo are ergonomic pliers forprecision mechanics and electronics

Other ergonomically designed pliersThe world’s fastest and mostergonomic slip joint pliers

Handles and gripsleeves gives thehands the bestpossible conditionsin all workingsituations.

Different edge bevelsgive the exact cut areademanded for solder-ing characteristics.

Different cutting edgeangles give the bestpossible accessibility.

6

A wide range forquality conscioustradesmen

Bahco’s vast experience in themanufacture of pliers is reflected inevery pair within our extensive range.Whether you require cutters, holdingpliers or combination pliers, you canrest assured that they will meetyour most stringent demands forergonomics, function and durability.

When you choose a pair of Bahcopliers you should make a consciousdecision to ensure that you receive thetype of pliers that perform your taskseffectively and efficiently.

Range withquality

Bahco pliers aretreated to prevent rust.

The black oxidized finish is suitable inall normal industrial environments.

The chromium plated finish isused for harsher environments.

7

There is nothing so irritating orcostly than when a tool breaksWorking hours are quickly lost and theworking tempo drops.

That is why a tradesman should alwaysinvest in tools of a professional quality– such as pliers from Bahco!

Our cutting pliers can performthousands of cuts before any signs ofwear become noticeable. Our qualitysystem guarantees that each pair ofBahco pliers you purchase maintainsthe same high, even quality.

Over 100 years of development workbehind today’s toolsBy consolidating, utilising anddeveloping these resources, we havebecome the world leader in producingnew generations of quality tools thatcombine good ergonomics with topperformance.

Tradesmen throughout the world trust their Bahco pliers.Real professional tools that never fail – not even when the tasks areextremely demanding.

Bahco has more than 100 years of experience in the heat treatment ofspecial steel and the manufacture of hand tools.

Bahco was the first in Europewith the ISO 9001 quality systemThe system covers all activities fromdevelopment to delivery.This means we do itright from the startand our tools liveup to our promises.

8

2628D-180 0042661 180 36 25 11 4 11 14 2.0 245 15

2628G-160 0042999 160 33 23 10.5 3.5 10.5 12 1.8 190 52628G-180 0042678 180 36 25 11 4.0 11 14 2.0 240 52628G-160IP 0055357 160 33 23 10.5 3.5 10.5 12 1.8 190 52628G-180IP 0044030 180 36 25 11 4.0 11 14 2.0 240 52628G-200IP 0101085 200 39 27 12 4.5 12 16 2.5 300 5

2628GC-160IP 0101863 160 33 23 10.5 3.5 10.5 12 1.8 190 52628GC-180IP 0101870 180 36 25 11 4.0 11 14 2.0 240 52628GC-200IP 0101887 200 39 27 12 4.5 12 16 2.5 300 5

2628S-180 0044054 180 36 25 11 4.0 11 14 2.0 265 32628S-200 0043002 200 39 27 12 4.5 12 16 2.5 310 3

Beskrivning Typ- EAN-kod Dimensioner, mm Max klipp-beteckning * 731415+ A B C D G kapacitet

mm P*

2101D-125 0106387 125 14 17.5 8 1.0 1.2 14 1.6 104 52101D-140 0106394 140 16 19.5 9 1.5 1.3 16 1.8 107 52101D-160 0106400 160 18 21.5 10 2.0 1.5 18 2.0 144 52101D-180 0106417 180 20 23.5 11 2.5 1.5 20 2.25 235 52101D-200 0106424 200 22 25.5 11 2.5 1.5 22 2.5 282 52101D-125IP 0106431 125 14 17.5 8 1.0 1.2 14 1.6 104 52101D-140IP 0106325 140 16 19.5 9 1.5 1.3 16 1.8 107 52101D-160IP 0106318 160 18 21.5 10 2.0 1.5 18 2.0 144 52101D-180IP 0106448 180 20 23.5 11 2.5 1.5 20 2.25 235 52101D-200IP 0106455 200 22 25.5 11 2.5 1.5 22 2.5 282 5

2101G-125 0106462 125 14 17.5 8 1.0 1.2 14 1.6 105 52101G-140 0106479 140 16 19.5 9 1.5 1.3 16 1.8 126 52101G-160 0106486 160 18 21.5 10 2.0 1.5 18 2.0 162 52101G-180 0106493 180 20 23.5 11 2.5 1.5 20 2.25 245 52101G-200 0106509 200 22 25.5 11 2.5 1.5 22 2.5 304 52101G-125IP 0106516 125 14 17.5 8 1.0 1.2 14 1.6 105 52101G-140IP 0106288 140 16 19.5 9 1.5 1.3 16 1.8 126 52101G-160IP 0106295 160 18 21.5 10 2.0 1.5 18 2.0 162 52101G-180IP 0106523 180 20 23.5 11 2.5 1.5 20 2.25 245 52101G-200IP 0106530 200 22 25.5 11 2.5 1.5 22 2.5 304 5

2101GC-125IP 0106547 125 14 17.5 8 1.0 1.2 14 1.6 105 52101GC-140IP 0106554 140 16 19.5 9 1.5 1.3 16 1.8 126 52101GC-160IP 0106561 160 18 21.5 10 2.0 1.5 18 2.0 162 52101GC-180IP 0106578 180 20 23.5 11 2.5 1.5 20 2.25 245 52101GC-200IP 0106585 200 22 25.5 11 2.5 1.5 22 2.5 304 5

2101S-140 0106592 140 16 19.5 9 1.5 1.3 16 1.6 156 32101S-160 0106608 160 18 21.5 10 2.0 1.5 18 1.8 202 32101S-180 0106615 180 20 23.5 11 2.5 1.5 20 2.0 300 32101S-200 0106622 200 22 25.5 11 2.5 1.5 22 2.25 388 3

Standard pliers Description Type EAN Dimensions, mm Max cutting

designation* code A B C D E F G capacity731415+ mm P*

Plastic coatedhandles

Side cutters “Two-in-one” For copper wire, hard steel wire and piano wire

Insulated grip,max 1000 V

Combination pliers with the capacity to cut piano wire


Insulated grip,max 1000 V

* Letter key:C = Chromium platedD = Coated handles

G = Ergo pliers (design registered)H = Hard steel wire

IP = Industrial pack (withoutconsumer packaging)

P = Piano wireS = Insulated max 1000 V

g

9

2233D-160 0114023 160 25 25 10 - - 10 50/35 160 52233D-200 0114030 200 28 30 12 - - 13 70/50 280 52233D-240 0114047 240 37 35 14 - - 16 95/70 340 5

2233D-160IP 0114054 160 25 25 10 - - 10 50/35 160 52233D-200IP 0114061 200 28 30 12 - - 13 70/50 280 52233D-240IP 0114078 240 37 35 14 - - 16 95/70 340 5

Beskrivning Typ- EAN-kod Dimensioner, mm Max klipp-beteckning * 731415+ A B C D G kapacitet

mm P*

2521D-140 0032907 140 37 16 7 3.0 1.5 100 52521D-140IP 0100590 140 37 16 7 3.0 1.5 100 5

2521G-140 0100293 140 37 16 7 3.0 1.5 115 52521G-140IP 0100613 140 37 16 7 3.0 1.5 115 52521G-160IP 0100620 160 42 16 7 3.0 1.5 120 5

2521GC-140IP 0102044 140 37 16 7 3.0 1.5 115 5

Standard pliers, cont.

g

Description Type EAN Dimensions, mmdesignation * code A B C D E F

731415+

Pliers for cutting and stripping cables


Round nose pliers







Flat nose pliers

With serrated gripping surface and short jaws2420G-125 0102525 125 23 16 7 2 4 120 52420G-125IP 0101955 125 23 16 7 2 4 120 5

2420GC-125IP 0101962 125 23 16 7 2 4 115 5

With serrated gripping surface and long jaws2421D-160 0032594 160 49 16.5 8.5 3 5 150 52421D-140IP 0101979 140 39 14.5 8.0 2 4 120 52421D-160IP 0101986 160 49 16.5 8.5 3 5 150 52421D-180IP 0101993 180 64 17 8.5 3 6.5 160 5

2421G-140 0102532 140 39 14.5 8.0 2 4 120 52421G-160 0102549 160 49 16.5 8.5 3 5 170 52421G-180 0102556 180 64 17 8.5 3 6.5 180 52421G-140IP 0102006 140 39 14.5 8.0 2 4 120 52421G-160IP 0100576 160 49 16.5 8.5 3 5 170 52421G-180IP 0100583 180 64 17 8.5 3 6.5 180 5

2421GC-140IP 0102013 140 39 14.5 8.0 2 4 120 52421GC-160IP 0102020 160 49 16.5 8.5 3 5 170 52421GC-180IP 0102037 180 64 17 8.5 3 6.5 180 5

1) Stripping2) Cutting Cu/Al

Capacity1) 2)mm mm2

10

8223 0112685 210 35 46 7.0 5 7.0 37 270 58224 0000012 250 40 51 8.0 6 8.0 45 350 58225 0000029 315 52 63 9.5 7 9.5 55 550 1

8223IP 0113149 210 35 46 7.0 5 7.0 37 270 58224IP 0101757 250 40 51 8.0 6 8.0 45 350 58225IP 0101764 315 52 63 9.5 7 9.5 55 550 5

Standard pliers, cont.

Snipe nose pliers


Insulated gripmax. 1000 V


Insulated gripmax. 1000 V

g





Slip joint pliers

Slip joint pliers

Type EAN code Dimensions, mmdesignation * 731415+ A B C D E F g

With serrated gripping surface. nose angled at 60° and cutting edge

2427D-160 0032846 160 46 17 9 2.0 2.0 12 1.5 120 5

2427G-160 0100408 160 46 17 9 2.0 2.0 12 1.5 170 52427G-200 0100415 200 70 17 9 2.0 2.0 12 1.5 180 52427G-160IP 0100743 160 46 17 9 2.0 2.0 12 1.5 170 52427G-200IP 0100750 200 70 17 9 2.0 2.0 12 1.5 180 5

2427GC-160IP 0102051 160 46 17 9 2.0 2.0 12 1.5 170 52427GC-200IP 0102075 200 70 17 9 2.0 2.0 12 1.5 180 5

2427S-200 0033027 200 70 17 9 2.0 2.0 12 1.5 200 3

With serrated gripping surface. and cutting edge2430D-140 0032853 140 39 15 8 2.5 2.0 12 1.25 80 52430D-160 0032860 160 49 16 8 3.0 2.5 12 1.5 150 52430D-200 0032884 200 72 17 9 4.0 2.5 12 1.5 160 5

2430G-140 0102563 140 39 15 8 2.5 2.0 12 1.25 120 52430G-160 0024070 160 49 16 8 3.0 2.5 12 1.5 160 52430G-200 0100422 200 72 17 9 4.0 2.5 12 1.5 170 52430G-140IP 0102143 140 39 15 8 2.5 2.0 12 1.25 120 52430G-160IP 0100811 160 49 16 8 3.0 2.5 12 1.5 160 52430G-200IP 0100835 200 72 17 9 4.0 2.5 12 1.5 170 5

2430GC-140IP 0102150 140 39 15 8 2.5 2.0 12 1.25 120 52430GC-160IP 0102167 160 49 16 8 3.0 2.5 12 1.5 160 52430GC-200IP 0102174 200 72 17 9 4.0 2.5 12 1.5 170 5

2430S-200 0033010 200 72 17 9 4.0 2.5 12 1.5 200 3

Description Type EAN Dimensions, mm Max cuttingdesignation * code A B C D E F G capacity

731415+ mm H*

Max.

11

Compact Ergo Pliers for precision mechanics and electronics Description Type EAN Dimensions, mm Cutting Cutting

designa- code A B C D E F G capacity edgetion 731415+ copper wire bevel g

Side cutters,Black finish4130 0100019 120 9 11 6.8 0.5 0.9 10 0.3-1.5 mm Micro 60 3

4131 0100026 120 9 11 6.8 0.5 0.9 10 0.3-1.5 mm Flush 60 3

Oblique cutters, 20°Black finish4231 0100033 119 - 12 10 6.8 0.5 13 0.3-1.25 mm Flush 55 3

Oblique cutters, 45°Black finish4239 0100088 129 19 9 7 3.0 1.5 5.5 0.3-1.0 mm Flush 60 3

Snipe nose pliers, straight, smooth gripping surfaceBlack finish4830 0100057 135 25 9 7 1.0 1.0 - - - 60 3

Snipe nose pliers, 60°, smooth gripping surfaceBlack finish4833 0100064 130 23 9 7 1.0 1.0 - - - 60 3

Flat nose pliers, smooth gripping surfaceBlack finish4430 0100040 135 26 9 7 1.0 4.0 - - - 65 3

Round nose pliers,Black finish4530 0100095 135 22 9 7 1.6 0.8 - - - 60 3

Side cuttersType 4130, 4131

Oblique cutters 20°Type 4231

Oblique cutters 45°Type 4239

Snipe nose pliers,straightType 4830Flat nose pliersType 4430Round nose pliersType 4530

Snipe nose pliers, 60°Type 4833

In addition to the pliers in this brochureBahco has about 500 other types of standard pliers.

There are special pliers for manufacturing andrepair of electronics and precision mechanics.

Please contact your nearest dealerfor further information.

BA

T-10

027-

EN

G. 2

002-

04. r

ekla

mce

nte

r.se

011

04. P

rin

ted

in S

wed

en b

y E

dit

a V

ästr

a A

ros,

200

0+20

00

www.bahco.com

bahco pliers

Documents