balexco 45 series

Technical Information

IFC-IBC-OBC.indd 1 31/1/12 09:16:22

Dimensions, design & drawings are wholly owned by Balexco. No part of this Technical Catalogue shall be copied, reproduced or transmitted in any form without a written permission from Balexco, Bahrain

Bahrain Aluminium Extrusion Company | 2

BALEXCO 45 CASEMENT SERIES

IFC-IBC-OBC.indd 3 31/1/12 10:26:36




INDEX

Contents Page Nos.

CEO’s Message ..................................................................................5

Information about Balexco & Ongoing Expansion .............................6

Aluminium Extrusion Standards ........................................................9

Certificates .......................................................................................17

Profile List.........................................................................................25

Accessories List ...............................................................................36

List of Gaskets..................................................................................45

Cross Section Details .......................................................................49

Profiles with Dimensions .................................................................67

Thermal Break Profiles .....................................................................81

Thermal Break System .....................................................................86

Toolings ..........................................................................................111




Jassim Mohamed Seyadi

Chief Executive Officer

BALEXCO 45, 45i CASEMENT SERIES ALUMINIUM SYSTEMS FOR YOUR LIFETIME

Bahrain Aluminium Extrusion Company (Balexco), the market leader in the Arabian Gulf for the manufacture of Aluminium extruded profiles has been growing consistently, maintaining the highest quality standards on all its products since its inception.

From a humble beginning of 6,000 tons in 1977 to a current production level of 25,000 MT annually is definitely a phenomenal achievement. An addition of press 4 with an individual capacity of 8,000 MT to the existing 3 press lines will enhance the capacity to a total of 33,000 TPA in the year 2012.

For Balexco it is a matter of pride that clients associated with the company are dedicated and loyal thereby achieving mutual benefit, with a commitment from the company to supply high quality products.

Consistently providing good quality by Balexco is a result of its investment in modern technologies and constant up-grading of its Human Resources in their competence and expertise in administration and technical skills.

Herewith, Balexco presents to you a system which has been one of the most successful Window & Door systems in the Gulf, viz., “Balexco 45, 45 i Casement Series” which gives you a range of profiles to meet the requirement of different buildings.

The “Balexco 45, 45 i Casement Series ” is a combination of fabricated Balexco aluminium system profiles, Balexco authorized & approved accessories & gaskets assembled together to provide high performance product duly tested for air, water leakages & for wind pressure. “Balexco 45, 45 i Casement Series ” is designed to be safe with excellent & inherited advantages of sliding system like space saving, large-size glass for sunlight, etc.

This system is wholly owned by Balexco and is registered as an intellectual industrial right for the company, besides Balexco 45, 45i, Balexco 60 & Balexco Luxury System.

It is with great honor that I present this “Balexco 45, 45 i Casement Series ” to all clients with assurance of its capability and availability of its accessories. Balexco shall be pleased to extend all the technical support and I assure all customers that Balexco will make all out efforts to ensure the best of our services are rendered along with the intense support so that every single customer is satisfied with Balexco & its products.

نظام بلك�صكو i 45.45 املف�صلي

نظـــــــــام املنيـــــــوم مــــــــدى احليــــــــاة

اإ�شتمرت �شركة البحرين ل�شحب االملنيوم )بلك�شكو(، من ال�شركات الرائدة

التي اأ�شواق منطقة اخلليج العربي، يف �شناعة �شحب مقاطع االأملنيوم يف

على للحفاظ وم�شتمر متوا�شل ب�شكل تنمو ومازالت اإن�شاءها منذ ظلت

اأعلى معايري اجلودة يف جميع منتجاتها.

من بدايــــة متوا�شــعة يف عـــام 1977 باإنتاج 6000 طن مرتي، اىل م�شتوى

يعترب �شنويا، وهو بال �شك بلغ 25000 طن مرتي والذي االنتاج احلايل

اإجنازا هائال يف �شناعة االأملنيوم. و�شوف ي�شكل ا�شافة خط املكب�س الرابع

اإنتاج قدرات اإىل باالإ�شافة �شنويا مرتي طن 8000 اإنتاج على بقدرته

اإىل االإنتاجية القدرة تعزيز اإىل حاليا القائمة الثالثة املكاب�س خطوط

33000 طن مرتي �شنويا، مع بداية عام 2012.

مع واالإخال�س التفاين يف م�شرتكني عمالء هم معها املتعاملني باأن بلك�شكو فخر دواعي وملن

عالية منتجات بت�شنيع االإلتزام �شديدة زالت وما كانت بلك�شكو باأن يدركون الأنهم ال�شركة

اجلودة.

وت�شتمر بلك�شكو بتوفري منتجات عالية اجلودة نتيجة ال�شتثماراتها يف جمال التكنولوجيا احلديثة

واملتطورة با�شتمرار، باالإ�شافة اإىل تطوير مواردها الب�شرية املخت�شة وخربتها يف جمال االدارة

واملهارات التقنية.

اأنظمة ابتكاراتها وت�شميماتها يف جمال واأجنح اأحدث لكم واحدة من اأن تقدم بلك�شكو وي�شر

على يحتوي والذي املف�صلي i 45.45 بلك�صكو نظام وهو اخلليج، مبنطقة واالأبواب النوافذ

جمموعة من املقاطع التي باإمكانها االإيفاء باإحتياجات و متطلبات الزبون يف خمتلف املباين.

اإن نظام بلك�صكو i 45.45 املف�صلي هو تركيبة من مقاطع نظام االأملنيوم املفربك، بلك�شكو لديها

�شالحيات م�شدقة بتجميع االإك�ش�شوارات والعوازل لتوفري منتجات عالية االأداء مت اختبارها ملنع

ت�شرب املاء والهواء و �شغط الرياح.

i املف�صلي ليجمع مزايا النظام املف�شلي والنظام ال�شحاب يف بلك�صكو 45.45 وقد �شمم نظام

اآن واحد مما يوفر يف امل�شاحة وي�شاعف حجم الزجاج للح�شول على مزيد من االإ�شاءة يف نف�س

الوقت، الخ.

باإ�شمها يف �شجل احلماية الفكرية ال�شناعية، باالإ�شافة وهذا النظام خا�س بال�شركة وم�شجل

اإىل اأنظمة بلك�شكو االأخرى مثل بلك�شكو 45، بلك�شكو i 45، بلك�شكو 60، ونظام بلك�شكو الفاخر.

من يحتاجه من ولكل اأ�شواقنا املف�صلي جلميع i 45.45 بلك�صكو نظام بتقدمي كثريًا نعتز اإننا

زبائننا، ونحن نوؤكد باأن هذا النظام يتمتع بكفاءة عالية، واإك�ش�شواراته متوفرة. كما اأن بلك�شكو

من خالل فريق خدماتها للدعم الفني على ا�شتعداد تام لتقدمي اأي م�شاعدة اأو م�شورة للجميع،

مما �شيحظى بالر�شى من قبل كل زبون جتاه بلك�شكو ومنتجاتها.




Historical Information about Bahrain Aluminium Extrusion Company (Balexco)

Bahrain Aluminium Extrusion Company BSC – Balexco, was established in 1977 as the first aluminium extrusion plant in the Arabian Gulf.

Its main objective was to add value to the primary aluminium produced by Aluminium Bahrain (ALBA). Balexco commenced operations with one extrusion press and one anodizing line mainly targeting to meet the demands of the construction and building industry in the Gulf.

Over the years, Balexco has tripled its capacity and expanded into markets all over the GCC, Yemen, West Asia & North Africa markets. Balexco now exports some 80% of its output to over many countries like India, SriLanka, Germany, France, United Kingdom, Lebanon, Yemen and to all the GCC countries.

Consumption of aluminium globally has been increasing in various industrial applications due to its main characteristics which are as follows:

• Light weight.

• Corrosion – Resistant, when powder coated/anodized.

• Ability to accommodate a variety of surface finishes and durability.

• Ease of machining into desired shapes.

On going expansion & future plans:

Balexco’s aim is to provide the best aluminium extrusions which suit the systems for windows and doors in the construction industry apart from various other applications in the industrial sector

Balexco had initiated & been the leader in the development of Systems., viz., Balexco sliding 100 series and casement 45 series. The curtain wall system in Balexco 60 and Balexco Luxury system are the latest in the list of new products that have been added to the existing systems thereby providing more options for the customers to choose from a wide range of a package of profiles. Balexco now has Casement

نبذة تاريخية عن شركة البحرين لسحب األملنيوم ( بلكسكو )

االأملنيوم ل�شحب البحرين �شركة تعترب

عام يف اإنتاجها بــداأت التي �ـــس.م.ب.م

ل�شحب نوعها مــن �شركة اأول 1977م

االأملنيوم يف منطقة اخلليج العربي.

كان الغر�س االأ�شا�شي من اإن�شاء ال�شركة هو

التي االأولية االأملنيوم تعزيز قيمة منتجات

األبا(. البحرين) اأملنيوم �شركة ت�شنعها

با�شتخدام متوا�شعة بداية بلك�شكو بداأت

االأنــودة واحــد ملعاجلة واحــد وخط مكب�س

متطلبات قطاع تلبية اأ�شا�شا وا�شتهدفت ،

االإن�شاءات يف منطقة اخلليج.

زيادة بلك�شكو من ال�شنني متكنت مبرور

طاقتها االإنتاجية مبعدل ثالثة اأ�شعاف ،

واأ�شواق اأ�شيا واليمن وغرب التعاون اخلليجي دول جمل�س اأ�شواقها يف جميع وتو�شعت يف

�شمال اأفريقيا. ويف الوقت احلا�شر تقوم بلك�شكو بت�شدير نحو 80% من اإنتاجها اإىل العديد

من الدول مثل الهند و�شريالنكا واأملانيا وفرن�شا واململكة املتحدة ولبنان واليمن وجميع دول

جمل�س التعاون اخلليجي.

خمتلف يف العامل م�شتوى على متوا�شال ارتفاعا ت�شهد االأملنيوم ا�شتهالك معدالت اإن

اأ�شباب هذه الزيادة اإىل اخل�شائ�س الهامة التالية التي اال�شتخدامات ال�شناعية. وتعزى

يتميز بها االأملنيوم وهي على النحو التايل :

الوزن. • خفة طالئه. عند التاآكل اأو ال�صداأ مقاومة •

عالية. حتمل قوة ميلك وهو ، خمتلفة باألوان طالئه اإمكانية •املطلوبة. الت�صاميم ح�صب ت�صكيله �صهولة •

التو�صع امل�صتمر واخلطط امل�صتقبلية:

واالأبــواب النوافذ اأنظمة مع املتوافق االأملنيوم منتجات اأف�شل توفري اإىل بلك�شكو تهدف

جانب اإىل االإنــ�ــشــاءات قــطــاع يف امل�شتخدمة

االأغــــرا�ــــس والــتــطــبــيــقــات االأخــــــرى يف قــطــاع

ال�شناعة.

بلك�شكو عملت امل�شتقبل نحو رائـــدة وكخطوة

)100 ال�صحاب )ال��ن��ظ��ام جمموعة تطوير على

نظام .)45 امل��ف��ص��الت اأن��ظ��م��ة ( وجمــمــوعــة

ال�شتائر احلائطية يف منتجنا بلك�صكو 60 ونظام

االإبتكارات اأحدث يعتربان من الفاخر بلك�صكو

اأ�شيفت التي و اجلــديــدة، املنتجات قائمة يف

من املــزيــد �شيوفر ممــا احلالية االأنــظــمــة اإىل

من االإختيار ميكنهم بحيث للزبائن اخليارات

بني جمموعات متنوعة و جديدة.




systems with 3 mm thickness for robust and sturdy performances, newer high performance thermal break systems - the Balexco Luxury system. We are in the process of introduction of 2.50 mm thick sections in casement Thermal break systems also very soon.

Besides manufacturing high quality aluminium extrusions, Balexco’s commitment to meet the stringent needs of the market & the evergrowing customer’s demand has been addressed on top priority which has resulted in Balexco investing in state-of-the-art manufacturing technology that has turned out BALEXCO to be a fully integrated and a modern plant.

In 2011, Balexco initiated an expansion project of approximately $ 21.5 million for a new extrusion press line & an anodizing line. The Phase 5 expansion was the additional extrusion press from GiA Clecim of Spain which was installed at a cost of US $ 12.5 Million. This expansion project was completed in a very short duration of time and the plan to commence commercial production from January 2012 is bang on target. This new 28 MN press will enhance the capacity by 9600 TPA escalating the total capacity of Balexco to 35600 TPA from the year 2012. The container Diameter is 236 mm & will accommodate billet diameter of 208 mm( 8”) & 236mm ( 9”).

The anodizing plant in a Phase 4 expansion is also being upgraded simultaneously at a cost of US $ 9 million and this would facilitate Balexco to meet the increased demand of a variety of products and market requirements in special finishes in various colors.

A vertical powder coating line is also planned as a phase VI expansion & the civil work is likely to commence immediately after the completion of Extrusion Press 4 & anodizing plant of phase 4. This plant will facilitate Balexco to provide products in Woodfinish, texturized powder coated & in products with Super Durable Finish ( SDF).

Balexco is consistently making steady progress, into the future by expansions & investments in a phased manner thereby ensuring the effective utilization of the inhouse resources & providing a good return on the investment to all customers using their products.

اإن �شركة بلك�شكو لديها االآن نظام املبوبة عالية

االأداء ب�شماكة 33 ملم وهو نظام م�شقول، قوي

و مقاوم للحرارة يعرف بنظام بلك�شكو الفاخر.

ب�شمك قطاعات اإنتاج ب�شدد االآن ال�شركة و

للحرارة املقاومة االأبواب نظام 2.50 ملم يف

فى القريب العاجل.

اإىل جانب ت�شنيع قطع االأملنيوم عالية اجلودة،

و ال�شوق تلبية حاجات على بلك�شكو حتر�س

هذه جتعل بحيث امل�شتمرة الزبائن طلبات

، و لذلك قامت اأولوياتها احلاجات على راأ�س

ال�شركة باالإ�شتثمار فى تكنولوجيا الت�شنيع ما

النظم اأحدث وفق تعمل بلك�شكو جعل م�شانع

التطور من كبري قــدر على و املعايري اأعلى و

التكنولوجي.

يف عام 2011 ، بداأ م�شروع تو�شعة بلك�شكو بتكلفة تقدر مبا يقارب 21.5 مليون دوالر. و ذلك

الإقامة خط جديد للمكب�س و اأي�شا خط جديد لالأنودة. املرحلة اخلام�شة من م�شروع التو�شعة

كان اإن�شاء خط جديد ل�شحب االأملنيوم من �شركة Clecim االأ�شبانية و التى مت تثبيتها

اإكتمل هذا امل�شروع خالل مدة ق�شرية جدا من اأمريكي. بتكلفة قدرها 12.5 مليون دوالر

الزمن، و �شوف يبدء االنتاج التجاري بدءا من كانون الثاين 2012 وفقا للخطة . اإن هذا املنتج

اجلديد MN 28 �شوف ي�شهم فى رفع القدرة االإنتاجية اإىل 9600 طن مما يجعل القدرة

االإجمالية لل�شركة ترتفع اإىل 35600 طن �شنويا بدءا من عام 2012 . اإن قطر احلاوية لهذا

املنتج يقدر ب 236 ملم، مع قدرة اإ�شتيعابيه تقدر 208 ملم من املادة اخلام )8 »( و 236

ملم )9« (.

و يف نف�س الوقت اأي�شا مت رفع القدرة االإنتاجية ملحطة االأنودة و هي املرحلة الرابعة من خطة

التو�شع بتكلفة قدرها 9 ماليني دوالر اأمريكي ، وهذا اأي�شا �شيعزز قدرة ال�شركة على تلبية

الطلب املتزايد من ال�شوق ملجموعات متنوعة من املنتجات باألوان خمتلفة و جودة عالية.

و يف املرحلة ال�شاد�شة من خطة

التو�شع ، �شوف يتم اإ�شافة خط

حيث الــطــالء مل�شحوق جــديــد

لتنفيذ امليدانية االأعمال �شتبداأ

االإنــتــهــاء من فــور املرحلة هــذه

اخلام�شة و الرابعة املرحلتني

من خطة التو�شع. اإن هذا اخلط

�شوف ي�شهل على ال�شركة توفري

خ�شبي طـــالء ذات مــنــتــجــات

كذلك و اجلـــودة و الــدقــة بالغ

منتجات طويلة االأمد ومعمرة.

اإن بلك�شكو حتقق تقدما مطردا

و ثابتا نحو امل�شتقبل عن طريق

ــات واال�ـــشـــتـــثـــمـــارات ــع ــش ــو� ــت ال

بــطــريــقــة تــدريــجــيــة وبــالــتــايل

ــمــان اال�ــشــتــخــدام االأمــثــل �ــش

للموارد املتوفرة مع �شمان احل�شول على عوائد جيدة على االإ�شتثمار جلميع العمالء الذين

ي�شتخدمون منتجاتها.

BAHRAIN ALUMINIUM EXTRUSION COMPANY

STATEMENT OF POLICY

The continued success and profitability ofBahrain Aluminium Extrusion Company (Balexco)

totally depends upon our ability to attract and satisfy customers.

BALEXCO is committed to strive continuously for customer satisfaction and continuous improvement in the

implementation of a Quality Management System,to meet these commitments the company will set

quality objectives at management review.

The Chief Executive Officer accepts full responsibility for the implementation of the Quality Management System

and its continuity and is committed toallocate appropriate resources.

JASSIM MOHAMED SEYADI CEO

Date: 02-02-2011

Licence No 2700 Licence No 2200FM 33839




ALUMINIUM EXTRUSION PRODUCT SPECIFICATIONS





Flatness tolerance




BALEXCO 45 & 45iTHERMAL & NON THERMAL BREAK PROFILES

BALEXCO CASEMENT




GENERAL APPLICATIONS

INTERNAL OPENINGDOOR

EXTERNALOPENINGWINDOW

TILT-TURN &BUTTOM HUNG

ROUNDEDWINDOW

*

* *

BALCONYDOOR

* *

* *

* *

TILT & SLIDE

**

*

* *

COMBINEDWITHSLIDING

PIVOTING

*

**

*

TOP HUNG

*

45i45

45i45

45i45

45i45

45i45 45i45

45i45

45i45

45i45

45i45

TILT-TURN& SIDE HUNG




LIST OF PROFILES




E1211

E1210

E1209

E1208

1636

1480

1034

1064

E1205

E1204

E1201

CODE

E1200

896

940

SECTION

840

WEIGHTg/m

896

cm^4Jx

DESCRIPTION PER.cm^4cm^3

Wx Jycm^3

Wy

699

631

398

486

493

421

450

424

13.14 63.06

4.93 53.83

8.662.097

20.1011.45

10.66 17.47

3.36 11.43

3.73 4.86

3.71 12.86

E1212

E1213

E1214

E1215

983

1671

1510

383

471

718

646

316

4.95 16.35

16.38 64.54

7.59 54.08

3.20 69.36

Z FRAME

L FRAME

Z FRAME COPLANER

COPLANERL FRAME

L FRAME DOOR COPLANER

L FRAME DOOR

L FRAME 100

DOOR

Z FRAME

L FRAME DOOR

L FRAME WINDOW

ARCHITRAVE

L FRAME 100

1.25

1.45

3.14

2.09

0.93

2.50

5.19

4.79

1.44

1.48

1.04

1.60

68.36

18.50

18.31

4.56

16.70

17.17

4.16

5.11

3.70

15.97

3.19

3.93

E1202

E1203

Z FRAME OPEN

L FRAME OPEN

737

743

275 1.25 3.3

3.2354 8.4




E1222

E1220

1337

1010

1004

E1237

E1236

E1233

1094

929

PER.

E1231

E1232

E1226

E1225

E1230

CODE

E1224

E1223

SECTION

1085

1094

2009

959

1634

DESCRIPTIONWEIGHT

1728

g/m

1801

Wycm^3

Wxcm^3cm^4

Jx Jycm^4

751

694

783

558

440

500

441

460

472

504

512

702

9.65

3.43

4.90

5.75

7.88

7.83

18.29

20.63

14.59

9.90

14.79

15.11

20.53

81.57

15.75

16.98

76.94

87.74

21.99 92.08

14.20 24.55

6.27 9.05

E1217 381 308 3.83 38.83

E1221 300 2.58 6.68734

TRANSOM

ARCHITRAVE

Z WING DOOR

SASH GLASS INSERT

WINDOW SASH

MULLION

SKIRTING FOR

LARGE TRANSOM

T SMALLER

44.7 mm

39.7 mmDOOR SKIRTING

DOOR TRANSOM39.7 mm

DOOR SASH

44.7 mm

44.7 mm

44.7 mm1.92

1.87

3.41

34.56

2.44

4.31

2.66

1.97

2.92

1.23

2.31

3.18

3.12

3.26

2.49

0.99

4.97

3.02

5.18

5.53

5.43

4.71

20.65

37.20

39.07

42.42

9.56

2.36

FIX FRAME

INSERTSASH GLASS

CENTRAL FORDOUBLE SASH

DOOR SASHINSIDE OPENING




SECTION

E1243

E1238

664

1096

E1250

E1256

E1249

CODE

E1247

E1245

cm^4DESCRIPTION

967

1193

983

g/mWEIGHT

905

1110

PER.cm^3cm^4

Jx Wx Wycm^3

Jy

422

454

526

316

501

5.46

3.59

12.99

2.82

11.81

7.98

16.16

15.25

4.81

17.95

50.306.20472

6.19421 22.87

E1255

E1274 556

383 155

176

2.40.24

7.90.2

E1281 462

L FRAME

ARCHITRAVE

TRANSOM

WINDOW SASH

SASH PROFILEOUTSIDE OPENING

OUTSIDE OPENING

ADDED FRAME

OPEN

ARCHITRAVE

-

1.17

-

1.90

1.33

1.98

5.93

1.16

6.26

-

-

19.69

2.79

3.99

5.36

2.48

2.41

4.54

1193 TRANSOME125139.7 mm

39.7 mm

DOOR SASH

ADDED FRAMEOUTSIDE OPENING

OUTSIDE OPENING

STRAIGHT

ARCHITRAVE

E1278 1499 L FRAME 100

E1280 230 GLAZING BEAD

185 3.34 1.34 4.66 3.52

525 9.9 - 6.77 -

59.85641 7.46 - -

0.4785 0.27 - -




1723

1258

2012E1265

E1264

E1263

1412

E1261

E1259 1118

ORNAMENTAL

REINFORCEDL FRAME 100 DOOR

LARGE TRANSOM 45mmREINFORCED

OPENING REINFORCEDDOOR SASH OUTSIDE

REINFORCEDWINDOW SASH

WEIGHT g/m

2948

2138

2816

1647

1647

1850

E1240

E1258

E1257

1185

E1239

E1234

E1229

E1228

E1227 894

CODE SECTION

TRANSOM 44.7mmREINFORCED

REINFORCEDDOOR SKIRTING

OPENING REINFORCEDDOOR SASH OUTSIDE

OPENING REINFORCEDDOOR SASH INSIDE

L FRAME REINFORCED

cm^3cm^3 cm^4cm^4

DOOR SKIRTING

MULLION REINFORCED

MULLION REINFORCED

DESCRIPTION PER.Jx Wx Jy Wy

7.3 - 10.36 -

48.17 - 175.3 -

20.8 - 99.7 -

41.25 - 181.3 -

17.69 - 40.82 -

19 - 39.12 -

19 - 91.39 -

7.6 - 11 -

4.0 - 16.9 -

13.63 - 20.09 -

20.86 - 57.7 -

13.99 - 35.39 -

41.13 - 104.56 -




cm^4

E1298

E1297

E1296

CODEg/m

1218

1215

1534

3 GASKET,L FRAME

DOOR SASH

100

3 GASKET,L FRAME100

SECTIONWEIGHT

DESCRIPTION PER.Jx

cm^3cm^3 cm^4Wx Jy Wy

7.7 - 53.98 -

50.86.25 - -

22.68.6 - -

E1427 2795 LOUVER -- - -

E1235 2522 TRANSOM

E1241 2066 Transom

E1244 1388 Transom

E1248 1728 Frame

E1253 1761 Frame

E1254 1345 Shutter

-- - -

-- - -

-- - -

-- - -

-- - -

-- - -

E1283 1831 Window shutter -- - -




E1284 2654 Frame 424

E1292 1647 Frame 399

E1299 2208 Transom 452

E1452 1207 Frame 377

E1453 1069 Door Frame 321

E1454 1247 351In open shutter

E1455 1393 Transom 382

E1457 1253 Out open shutter 352

E1459 1072 319Door Frame

E1458 1677 Door skirting 504

E1456 400 Architrave 164

cm^4CODE

g/mSECTION

WEIGHT DESCRIPTION PER.

Jxcm^3cm^3 cm^4

Wx Jy Wy

-- - -

-- - -

-- - -

-- - -

-- - -

-- - -

-- - -

-- - -

-- - -

-- - -

-- - -




E1601

E1602

E1603

E1604

E1605

E1606

E1613

E1617

E1284

E1616

cm^4CODE

ALL PROFILES WITH 3mm THICKNESS

g/mSECTION

WEIGHT DESCRIPTION PER.

Jxcm^3cm^3 cm^4

Wx Jy Wy

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

Similar to E12301442

1785 Similar to E1237








2654

4.38

15.22

17.70

8.79

22.89

18.04

24.70

6.50

4.60

8.34

19.80

29.58

26.57

83.25

103.85

93.70

116.86

11.80

14.91

136.33Similar to E1210




E1416

E1414

E1413

E1412

E1411

E1410

1408

E1406

E1405

E1404

E1402

E1403

E1401

CODE WEIGHT g/m

SECTION DESCR.

E1426

PER.

E1423

E1422

E1421

E1420

E1418

E1419

E1417

E1456

PER.DESCR.g/m

WEIGHT SECTIONCODE

48

137

160

150

138

139

133

138

128

118

99

92

634

4452

5522

1218

292

410

424

251

467

400 164

224

86

209

200

75

426

920

736ROD

DOOR RABBET

26mm

21mm

16mm

11mm

26mm

21mm

16mm

11mm

6mm

CORNER JOINT25 mm

CORNER JOINT37 mm

51.5 mmCORNER JOINT

13.8 mmCORNER JOINT

THRESHOLDDOOR

FLY SCREEN

TRANSOMFLY SCREEN

HANDLE ANDT JOINT

DOORFOR 180°

ORNAMENTAL

E2075 238CORNER JOINT1582

E1407

148

275

262

254

224

227

259

246

230

213

183

170

3013

186 6mm 103

COMMON PROFILE LIST: Beading & Corner Joint




E1324

E1323

E1322

E1320

E1314

E1311

E1310

E1309

E1305

E1304

E1301

E1300

CODE SECTION

2101

2380

2423

1590

1172

1096

DESCRIPTION

1836

1107

1494

1116

1050

1057

g/mWEIGHT

PER.cm^4

Jxcm^3

Wxcm^4

Jycm^3

Wy

451

434

475

460

591

734

830

470

13.156.58835

27.7919.08620

116.7432.10938

112.3925.46903

TRANSOM

Z FRAME

L FRAME DOOR COPLANER

L FRAME DOOR 120mm

L FRAME COPLANR

COPLANERZ FRAME

L FRAME

Z FRAME

49.7 mm

DOOR44.7 mm

FIX FRAME

LARGE TRANSOM

OUTSIDE OPENING

L FRAME 120mm

49.7 mm

49.7 mm

3.77

4.78

4.19

2.02

43.36

39.92

8.94

4.23

E1315 1367L FRAME

OUTSIDE OPENING

E1316 2123

520

470L FRAME 120mm

OUTSIDE OPENING

SKIRTING FOR

SKIRTING FOR

THERMAL BREAK PROFILES LIST




E1347 *

E1346

E1345

E1343

CODE

E1338

E1337

E1336

E1331

E1330

E1326

E1325

SECTION

1045

1140

1442

804

Jycm^4

1544

1545

2275

1391

DESCRIPTION

1080

2423

2226

WEIGHT g/m cm^4

PER.Jx

cm^3Wx Wy

cm^3

99.8223.44835

131.4820.98867

14.44

15.06

20.05

8.42

23.81

27.25

523 5.74

5.62466

14.37

2.82

609

317

17.08

14.99

642

641

14.16

26.38

19.06

5.41

9.93

481

601

3.82445

INSIDE OPENING

CENTRAL DOUBLE

LARGE WINDOW

WINDOW SASH

MULLION

DOOR TRANSOM44.7 mm

SASH PROFILE-WINDOWOUTSIDE OPENING

INVERSION RABET

3.28

3.60

33.28

37.09

2.20

2.17

6.69

1.25

8.77

6.83

2.71

3.84

1.39

4.43

4.61

5.22

5.11

6.06

6.52

4.37

7.02

6.14

SASH

SASH

DOOR SASH

DOOR SASHOUTSIDE OPENING

ADDED FRAMEOUTSIDE OPENING

ADDED FRAME-WINDOWOUTSIDE OPENING

* Check for the die availability with balexco before ordering

THERMAL BREAK PROFILES LIST Continued

ACCESSORIES LIST




45 45i*

45 45i*

45 45i*

C0010

WINGS-HINGEGiesse No. 00012

*

C 0160 - without kit

PRIMA CREMONE

C0050

WINGS-HINGEGiesse old No. 0098X

Giesse No. 01110for kit C1180 for Inside open

C1190 for Outside open

45 45i*

45 45i**

C0140

EURP 900 CREMONE

C0080

HINGEGiesse old No. 00120X

Giesse No. 01090(Turn & Tilt window handle)

45 45i*

45 45i**

C0160

PESOS & SUPERGIAPROD STRIKER

C0090(for inside open)

EURO CREMONEGiesse No. 01000

For kit: C0190, C0380 & C0260to be ordered separately

Giesse old No. 01110

45 45i*

45 45i**

C0190

SINGLE-DOUBLESTRIKER

C0110for outside open

NOVA CREMONEGiesse No. 01004

For kit: C0190, C0260, C0360 & C0310to be ordered separately

Giesse No. 01339

(Giesse new No. 0098N)

(Giesse new No. 00120N)(Giesse new No. 01033N)

*

*

*

*

*

IMPORTANT NOTE: USE GENUINE BALEXCO APPROVED ACCESSORIES ONLY FOR AN EFFICIENT AND STABLE BALEXCO SYSTEM




C0270

PESOS LEVERBOLT FOR DOORS

45 45i*

45 45i*

45 45i*

45 45i*

C0200

TAVELLIND SAMBAGiesse old No. 01635

*

Giesse No. 02150

C0280

PESOS SECURITYTERMINAL

C0210

FINGER CATCHGiesse No. 01701 Giesse No. 01954

GRISBI

45 45i*

45 45i**

C0290

BRASS THRESHOLDCREMONE

C0230

LASER UNITGiesse No. 01954

For top hung windowsBUSHING 02159

45 45i*

45 45i**

C0310

CONNECTING PIN

C0240

RELEASABLEGiesse No. 02014

For bottom hung windows

Giesse No. 02255

45 45i*

45 45i**

C0330

RABBET SEALSAND WING

C0260

ROD TERMINALGiesse No. 02114

Giesse No. 02269

MAIGGIA A

TELESCOPIC

DOMUS

(Giesse new No. 01642/01652)For bottom hung windows

* *

*

*

*

*





C1150

MASTER CP HANDLE

45 45i*

45 45i*

45 45i*

45 45i*

C0340

SUPLEMENTARYFASTENING

*

Giesse No. 02452

C0420

BIKE DOUBLE-BENTNYLON-HANDLE

C0350

HOLE COVERGiesse No. 02360 Giesse No. 02604

DRAINAGE

45 45i*

45 45i**

C0460

TWIN HANDLEBOLT KIT (for C 0420)

C0360

CONNECTION KITGiesse No. 02379

Giesse No. 02668

45 45i**

C066

SKATTO ADJUSTABLE FIXING TABGiesse No. 06500

45 45i*

C0380

CONNECTION BLOCKSGiesse No. 02387

ELEMENT FOR

Giesse No. 02315

STARDUE/NOVA ALUMINIUM

**

*

*

*





45 45i* *

45 45i*

C1180

Giesse No. 04070For inside open windows

C1190

Giesse No. 02240For outside open windows

KIT COPLANER

45 45i*

KIT OVERLAP

C0640

TILT & TURN WITH HANDLEC 0640.2 - Hinge - Giesse Code - 4704

C 0640.3 - Mechanism - Giesse Code - 4711C 0580.2 - Arm - Small - Giesse Code - 4200

C 0590.1 - Arm - Big - Giesse Code - 4761000VC 1160 - Handle - Giesse Code - 1150

C 1170 - Kit for C 1160 - Giesse Code - 4071

*

*





04760 390-550 mm04761 550-1700mm

1090NGiesse No.01090


TILT&TURN MECHANISM C0640: Giesse No 04751N




04274 04282

04301N

04770

04770

ITEM IN VERSION


AddITIONAL LOCKS TILT&TURN MECHANISM C0640: Giesse No 04751N




E2075

ALUMINIUMCORNER JOINT 41.4[mm]

45 45i**

45 45i*

45 45i**

45 45i**

45 45i*

45 45i**

45 45i**

45 45i**

E2075


PROFILES E1310

E2075


E2075

ALUMINIUM

CORNER JOINT 22.7[mm]

E1416

ALUMINIUMCORNER JOINT

E2075


E2075

ALUMINIUM


E2075

ALUMINIUM


45 45i* *

E1416


45 45i**

E2075


PROFILES -E1210-E1230

PROFILES E1314-E1320-E1330

PROFILES E1243-E1343


PROFILES


PROFILES

PROFILES E1310 PROFILES E1211-E1231-E1245

CORNER JOINTS




E1417

ALUMINIUM

CORNER JOINT 22.7[mm]PROFILES E1337-E1338

45 45i**

45 45i**

45 45i* *

45 45i**

45 45i**

45 45i*

45 45i**

E1416


PROFILES E1345

E1417


PROFILESE1209-E1237-E1238-E1309

E1417



E1416

ALUMINIUMCORNER JOINT 67.6-28.7[mm]

PROFILESE1311-E1315-E1316-E1331

E1416


E1416


PROFILES E1345

45 45i*

E1417


PROFILES

PROFILES E1211-E1231-E1245

E1209-E1237-E1238-E1309

*

*

CORNER JOINTS

LIST OF GASKETS




4mm

45i

45i

E2104

E2110 EPDM

2mm

EPDM

*

*

45

*

* *

45

E2115

E2114

EPDM45

EPDM 45*

**

45i

45i*

45i

45i

45i

DESCRIPTIONSITEM

E2101

E2102

E2103

6mm

4mm

EPDM*

45*

* *

2mm

EPDM

MATERIAL

EPDM

**

45

45

MATERIAL

E2113

E2112

E2111

ITEM

45i45

EPDM 45

*

*

*

45i

3mm

*

DESCRIPTIONS

EPDM

45

*

45iEPDM




4mm

B+D

C+D

A+E

C+E

B+E

B+E

C+E

C+F

B+D

B+D

C+D

A+E E1406

E1407

6

11

E1414

E1413

Glass BeadingDimensions mm

B+E

A+E

C+E

B+E

B+D

C+E

C+D

B+D

A+E

C+D

C+E

B+E

Gaskets

4mmA

E1403

E1405

E1404

16

21

26

E1412

E1411

E1410

2mm

Glass Beading Profiles

3mmB C D

13

14

15

16

17

19

20

22

23

24

21

18

33

34

30

32

31

28

29

27

25

26

26

27

29

28

23

24

25

21

23

24

22

20

18

19

45

36.3

11

10

12

21

20

22

16

17

15

13

14

11

12

45i -45i

46.3

9

10

8

45

6

7

41.3

8

9

6

7

GLASS THICKNESS [mm]Space For Glass

6mmE

E2102E2112E2113 E2104 E2103

OUTER OUTER OUTER INNER INNER

19

18

17

16

15 5

E2101

F2mm

GLAZING GASKETS




SPACE FOR GLASS 36.3

DOOR PROFILES

E1403

E1237

SPACE FOR GLASS 41.3

WINDOW PROFILES

E1403

E1220

41.3 36.3

36.3

E1224

E1403

41.3

E1230

E1320

46.3

THERMAL BREAK WINDOW PROFILESSPACE FOR GLASS 46.3

E1331

E1337

46.3

41.3

THERMAL BREAK DOOR PROFILES

E1403

E1403

E1403

E1403

GLAZING dIMENSIONS

CROSS SECTION dETAILS




sectionhorizontal

verticalsection

E1205

E1230

E1410

E1236

HH

W W

55

W/2 - 108.5

W/2 - 24.5

SINGLE WING W - 42

W/2 - 108.5

W/2 - 24.5

21

7

21

W/2 - 118.5

SINGLE WING= W-136

W

W/2 - 118.5

68 68

H - 4

2 H

H-12

6

2121

H - 1

365

INSIdE OPEN WINdOWS- COPLANAR




SINGLE WING

12E2075 CORNER JOINT IN PCS

E1410

C0330

C0260

C0350

2W-4H

DRAIN HOLE COVER R40/50

WING CLOSING PLUG

TERMINAL FOR ROD

3

1

2

ITEM

GASKET

E2112

E2110

E2103C0050C0090

C0190

2W-4HE1230

E1236 1H

E1205 2W-2H CREMONE EURO

SINGLE/DOUBLE STRIKER

HINGE

ITEM

ACCESSORIESPROFILE

NUMBER N. PCS DESCRIPTIONS

ADJUSTABLE TAB mm 17.2

CONNECTIONS BLOCKS C/GASK

1 C0660

2

C03804

8

1

DESCRIPTIONS

ACCESSORIES

ITEMN. PCS N. PCS

DOUBLE WINGDOUBLE WING

2W-4H

2W-4H

4W-8H

N. PCS

GASKET

ITEM

E2110

E2112

E2103

CONNECTIONS BLOCKS C/GASKC0380

C0260 TERMINAL FOR ROD

1

2

ITEM

C0090

C0190E1410

E1230

2W-2H

2W-2H

E1205

NUMBER

2W-2H

N. PCS

CREMONE EURO


DESCRIPTIONS

ACCESSORIESPROFILE

CORNER JOINT IN PCS


DESCRIPTIONS

E2075

2

1

ITEM

C0660

N. PCS

8

6

N. PCS

ACCESSORIES

4W-4H

2W-2H

2W-2HN. PCS

SINGLE WING

HINGE C0050 2

DRAIN HOLE COVER C0350 2

SINGLE WING

DOUBLE WING

INSIdE OPEN WINdOWS- COPLANAR




sectionhorizontal

verticalsection

E1201

E1230

E1410

E1236

H - 1

36

H-12

6

H

H - 4

2

55

W/2 - 108.5

W/2 - 24.5

SINGLE WING W - 42

W/2 - 108.5

W/2 - 24.5

21

7

21

W/2 - 118.5

SINGLE WING= W-136

W

W/2 - 118.5

68 68

5

6 21

H HWW

6 21

INSIdE OPEN WINdOWS - OVERLAP




C081

C066

C0660

E2075

C038

2W-4HE1410

E1236 SINGLE/DOUBLE STRIKER

TERMINAL FOR ROD

WING CLOSING PLUG

DRAIN HOLE COVER R40/50C035

C019

C026

C033

1H

3

2

1

2

2SINGLE/DOUBLE STRIKERC0190

PROFILE

2W-2H

2W-4H

NUMBER

E1230

E1201

DESCRIPTIONS

CREMONE EURO

N. PCS ITEM

C009C008 HINGE

ACCESSORIES

N. PCS

14

DRAIN HOLE COVER

TERMINAL FOR ROD


C0350

C0260

1

2

2

PROFILE

2W-2H

2W-2H

2W-2H

E1230

E1410

E1201

NUMBER DESCRIPTIONS

CREMONE EURO

C0080

C0090

HINGE

ACCESSORIES

ITEMN. PCS

1

2

N. PCS

2W-4HCORNER JOINT SCREW HOLLOW 11

C0620/ C0620.1

ADJUSTABLE BOLT

12

1

E2112

N. PCS

4W-8H

2W-4H


CONNECTIONS BLOCKS C/GASK

ITEM DESCRIPTIONS

ACCESSORIES

N. PCS ITEM

81

E2110

E2103

GASKET

N. PCS2W-2H

2W-2H

4W-4H


CORNER JOINT IN PCS

ACCESSORIES

DESCRIPTIONSITEM

8

6

E2110

E2112

E2103N. PCS ITEM

GASKET

SINGLE WING


SINGLE WINGSINGLE WING

DOUBLE WING

INSIdE OPEN WINdOWS - OVERLAP




sectionvertical

horizontalsection

ITEM

GASKET

E2112

E2110

E2103ITEM

C0080

E1410 2W-2H

PROFILE

E1201

E1245

NUMBER

2W-2H

2W-2H

N. PCS DESCRIPTIONS

HINGE

ACCESSORIES

2

N. PCS

2W-2H

N. PCS2W-2H

4W-4HSAMBA-FLAT WINDOW HANDLEC0200 1

CORNER JOINT FOR FRAME

CORNER JOINT FOR SHUTTER

ADJUSTABLE TAB mm 17.2LASER TELESCOPIC ROD INOX

E2075

C0660

E1416

C0230

4

4

61

E1201 E1245 E1210

W

21 21

66

W - 42

W - 154

W

H

5 W - 164

H - 1

64

H-15

4

H - 4

2H

2165

216

7777

7777

TOP HUNG WINdOW: FRAME OVERLAP




sectionvertical

horizontalsection

E1402

E1209 E1237

E1411

E1238

E1224

E1420

551 5 51

WL = W/2 - 48.5

W

SINGLE WING = W - 112

5

5110

H -

66

H

5

WL = W/2 - 48.5

H H

W W

W/2 - 170.5

W/2-180.5 5

H - 1

81

H - 2

37

W/2-180.5 5

W/2 - 170.5

SINGLE WING = W - 244 122122

6111

0

dOOR OPEN INSIdE




GASKET

ITEM

E2110

E2112

E2103C0010

ITEM

C0400E1237

E1411 4W-2H1W-2H

PROFILE

E1209

NUMBER

1W-2H

N. PCS

HANDLE MASTERHINGE 2 WINGS

DESCRIPTIONS

CORNER JOINT IN PCS


E2075

1

ACCESSORIES

C0660

N. PCS

2

4

8

2W-4H

4W-2H

4W-2HN. PCS

E1225 1W

E1224 1W

E1402 1W-2H

E1420 1W

LOCK 1---

E2114 1W

N. PCS

E1420 1W

---

E2075

C0660

C0400

C0010

ITEM

E1224

E1402

E1225

1W

1W-2H

1W

E1411

E1237

E1209

NUMBER

4W-4H

1W-3H

1W-2H

N. PCS

CORNER JOINT IN PCS

LOCK


HANDLE MASTER

DESCRIPTIONS

HINGE 2 WINGS

ACCESSORIESPROFILE

1

6

10

1

ITEM

4

DESCRIPTIONS

E2114 1W

E2103ITEM

E2112

E2110

N. PCS

4W-4H

2W-6H

4W-4HN. PCS

ACCESSORIES GASKET

E1238 1H

C0180 STRIKER PESOS/SUPERGIAP 1

C0270 PESOS FLUSH BOLT FOR DOOR 2

C0280 SAFETY TERMINAL FOR 2150 2

C0290 BUSH FOR THRESHOLD 1

C0730 CENTRAL PLUG DOUBLE SASH 2

SINGLE WING



DOUBLE WING

dOOR OPEN INSIdE




sectionvertical

horizontalsection

E1209 E1238 E1237

E1402 E1411

E1224

E1420

1

W

5

51

5

5

5

51SINGLE WING = W - 112

W/2 - 48.5

10

5

H

51

5

W/2 - 48.5

H - 6

6

HH

W W

H - 2

37

H - 2

47

W/2-180.5

W/2 - 170.5

W/2-180.55

SINGLE WING = W - 244 714671

W/2 - 170.5

46

dOOR OPEN OUTSIdE




N. PCS

N. PCS

C0730

E1420 1W

CENTRAL PLUG DOUBLE SASH

C0290

C0280

C0270

C0180C0010

C0400

C0660

E1224

E1402

1W

1W-2H

E1238

E1411

E1237

E1209

2W-4H

1W-3H

1W-2H

1H

BUSH FOR THRESHOLD

HANDLE MASTER


SAFETY TERMINAL FOR 2150

PESOS FLUSH BOLT FOR DOOR

ROD STRIKER HINGE

ACCESSORIES

ITEM

PROFILE


E1420 1W ---

C0660

E1417

C0400

ITEM

C0010

E1224

E1402

1W

1W-2H

E1411

E1238

E1209

NUMBER

1W-2H

2W-2H

N. PCS

1W-2H

CORNER JOINT IN PCS

LOCK


DESCRIPTIONS

HANDLE MASTER

HINGE

PROFILE

2

CORNER JOINT IN PCS

1

10

1

2

2

E1417

---14

LOCK E2110

E2112

E2103

E2114

1

4

1W

2W-4H

2W-6H

2W-4H

ACCESSORIES

ITEM DESCRIPTIONS

GASKET

ITEMN. PCS N. PCS

1

2

8

1

2

E2114 1W

E2103

E2112

E2110

ITEM

2W-2H

2W-4H

2W-2HN. PCS

ACCESSORIES GASKET

C0180 ROD STRIKER 1

SINGLE WING



DOUBLE WING

dOOR OPEN OUTSIdE




ACCESSORIES

sectionvertical

1W-2H

N. PCS

PROFILE

1W-4H

horizontal

E1411

E1224

E1238

E1209

NUMBER

E1426 ASSEMBLY KIT ALUMINIUM DOUBLE

BIKE DOOR HANDLE NYLON

CORNER JOINT IN PCS

1W

2W-4H

C0460E2075

C0420

C0290 BUSH FOR THRESHOLD

61

1

1

DESCRIPTIONS

STRIKER PESOS/SUPERGIAPPESOS FLUSH BOLT FOOR DOOR

ACCESSORIES

2W-6H

C0270

C0280

ITEM

C0180


N. PCS

2

21

ITEM

section

N. PCSDESCRIPTIONS

PIVOT HINGE FOR SWING DOORS

GASKET

2

ITEM N. PCS

1W-2HE1402

DOUBLE CURVE

FLOOR CANCEALED DOOR-CLOSER 2

LOCK 1

E2103 2W-4H

E2112 2W-4H

E2123 2W-4H

POLIBOND 4W-12HPB 48.700 3P

E1209

E1426

E1238

E2123

E1411

E1224

E1402

W/2 - 80

H -

815

H

W

H

W

5H

- 262

H - 2

52

76

5 W/2 - 212

W/2 - 202

6111

0

76

61 61

5

8

SWING dOOR




E1201 E1230 E1236 E122

0E1

222

E1410

E1410

2

E2112 E2103

E211

0E1

201

E123

0E1

230

E123

0E1

230

E120

1

2

21 42 20

6 7

20 42 42 20

475

31 315

595

31

5 5 5

2720

206

55

4219

2020

56

642

4220

2042

216

55

4765

531

315

915

3131

547

5

3

1

4

5

6

1

3

4

5

6

dOUBLE LEAF OPEN INSIdE, FIX LIGHT AT THE BOTTOM ANd A BOTTTOM HUNG WINdOW AT THE TOP




E1201

E1247 E1236E1245

E1410

E1410

E122

0

2

E2112

E2103E2110

E1245 E1245

E124

5

E124

7

E120

1

2

5 25 20 20 25 5 59 5 25 20

76 76 767

21 57

547

5 55

2720

47

515

20196

57

5

2520

565

155

57615

3

4

1

1

3

4

dOUBLE LEAF OPEN OUTSIdE & FIX LITES.




E1256

E1230

E121

4

E1410

E123

0E1

220

E125

6

E2110 E2112

E2103

216

6

21

42 205

47

4220

5

2042

56

1920

5

47

275

20

31

475

3131

565

5

3

1

4

2

1

4

3

2

INSIdE OPEN HINGE WINdOW WITH TOP ARCH




E1201

E1247

E1245E1

220

E124

7E1410

E124

5

E124

7

E120

1

E141

0

FIX PART

E211

0

E1201

E1410

521 57 25 20

47 765

5752

520

2025

557

21

5

7676

5

475

55

19205

65

4

3

2

1

27 20

5

47

1

2

4

3

TOP HUNG WINdOW WITH FIX LITE




5

61

2061539

559

55

2020 61 395

61 795

130

110

5

E1211

E1237

E141

1E140

2

1 3

E2110

E1226

E141

0

4

E210

3

E2112

1

4

5

E1224

2

2

6

INSIdE OPEN dOOR WITH BOTTOM HUNG ANd A FIX




642

205

915

31

3

5

5

6120

61

59

5

691

E122

2E2

110

E123

0E2

112 E2103

E1211

E141

0E1

410

E1410

INSIdE OPEN dOOR WITH BOTTOM HUNG ANd A FIX




130

110

55

65

45

66 5 81

580

1

E1224

2

E1209 E1243 E1238E1411

1

2

3

4

E1220

E1243

E1238

E1411

3

E1410

45

66

E1209E1410

4

OUTSIdE OPEN dOOR WITH FIX LITE

PROFILES WITH dIMENSIONS




E1236

E1220

E1230 E1231

E1249E1233

E1223 E1222

E1232E1247

E1245

E1221

130

65

91

52

52.3

45 52.345

52.3

52.3

52.3 45 52.3

45

25

42

59

30.5

17

20 56

110

44.7

72

57

2513.5

5143

44.7

19.2

62

62 42 20

44.7

44.7

41.3





E1225

E1250

E1243

E1224

E1238 E1237

130

130

65

41.1

91

39.7

51204545

E1251

39.7

9072

25

110

39.7

72

15

41 20619.5

39.7





E1208 E1209

E1226

7925 29 25

45456.

4

39.6

205 46 205 46

99.5

44.7

24PROFILES WITH dIMENSIONS




COPLANER FRAMES PROFILES

E1204 E1205

E1210 E1211

E1200 E1201 E1212

COPLANAR FRAME PROFILES

5245

4742

52

45

4742

45

5954

45 45

474245

E120345

47

E1202

50

45

45

20

COPLANAR FRAME PROFILES

45

39 11

45

11 115

100

55 22 34

45

47

2025 25 5 22 62 20

100





OPTIONAL FRAME

E1213 E1214

E1215 E1217 E1255 E1274

E1256

E1281

OPTIONAL FRAME

100

100

45

100

45 4543.4

222

38

E1427

OPTIONAL FRAME

39 20 27 20 27 20

55.7

40 40

60

50





E1458

E1456

E1284

E1270

E1254

E1253E1244

110

45

120

49.4

52.2

81.5

E1283

78.8

41.3

E1248

16.7

55.5

5

81.4

45.0

6

110

59

44.7

91

100

59





E1292

E1299E1452

E1453

E1254

E1235

E1459

E1455

E1241

100

99.5

78.96

100

47.6

69.9

9

100

61.8

44

44.98

99

52.279

129

61.8

45.2

45

91





3MM THK PROFILES

E1457E1454

E2092

E2059

3MM THK PROFILES

E1601 E1602 E1603

3MM THK PROFILES

91

45

91

45

100

44

45

40

40

31

41.3 52

.3

45

62

61

4538.5

81

45

50.5





E1604E1605

E1606

E1613

130

65

44.7

E1616

45

45

E161745

120

E1284

3MM THK PROFILES3MM THK PROFILES

50

10045

64.4

10045

39

45100





E1277

E1296E1295

E1286

E1275

E1271 E1276

E1272

E1267

E1269

E1270

E1261

100

47

100

47.2

76

52.3

7045

45

25

76.8

45

47

52.3

62

75

45.5

53.1

41.3

20

81.38

45.4

19

24.5

15.65

81.38

45.4





E1263E1262

E1259

E1297E1298

E1266

44.7

70

E1279

99.99

64.4

E1282

59.4

52.3

88

E1287

E1240

120100

45.1

42.8

45.847

.4

20

53.177

.2

47

100

130

40.1

45

97

52.2





E1239

E1227

E1228 E1229

E1265E1264

E1258

E1257

E1234

97 47.5

57

115

95

5520 20

39.7

45

130

80

104.96

45.4

100

45.4

40.5

65.8

45.5

130

115

44.7

2055





E1420

E1402E1401

E1418

E1419

E1422

E1410

E1403

E1411

E1421

E1404

E1412

E1423

E1405

E1413

E1426

E1406

E1414

E1407

E1456

E1280

E1417 E1416

2537

51.5

19.6

26 21

16 11 6 26

21 16 11 6

13.8

3134

32.5 40

2055

.7

40.1

10.6

20 20202020

2020

202020

14.2

5

41.3

2016

50


THERMAL BREAK PROFILES WITH dIMENSIONS




42

59

30.5

17 25

43 51

56

49.7

20

110

49.7

72

13.5 25

25

59

57

25

49.7

E1330

E1336

E1320

E1331

E1323

E1345

E1322

E1346

E1347

65

91

130

50 50 57.3

57.3

57.350

E1570

E1520

1080 g/m 1391 g/m1045 g/m

E1578

E1529 E1521

E1571

2275 g/m 1442 g/m1140 g/m

E1278E1573

E1577

E1528 E1523E1527

2423 g/m 1590 g/m 1172 g/m

E1563

E1512

E1513E1562

E1560

E1510





72 90

44.7

72

110

61 20

119.

5

49.7

24

9.541

15 25

44.7

E1324

E1325

E1337

E1326

E1338

E1343

50 50

81

43.5

130 43

.5

46.1

130

7929

E1574

E1524

E1575

E1525

1545 g/m 1544 g/m

E1563

E1515

E1576

E1526

2226 g/m

804 g/m

E1563

E1514

E1564

E1511

2423 g/m

2380 g/m





225

202252525

11115 45465

1139

20

50

47

1139

345

120

20

45

50

120

34

59

59

39

E1310

E1305 E1314E1309

E1300 E1301

E1311

E1304

E1316E1315

45

50 57

66

47

57 59

71

50

57.5

8

50.1

8

50

47

120

50

59

E1551E1552 E1551

E1501E1502 E1503

1057 g/m 1050 g/m 1116 g/m

E1504 E1506

E1552

E1556

E1557

E1507

1494 g/m 1096 g/m1107 g/m

E1508E1509

E1502

E1554

E1558

E1558E1555

1667 g/m 2123 g/m 1836 g/m 2101 g/m

E1505




BALEXCO 45 CASEMENT SERIES24

0

68

118

118

78

1367 g/m

E1508

100

2123 g/mE1316

E1315

E1509

E1558

E1558


THERMAL BREAK SYSTEM 45i




E1305

E1330

E1412

E1336

horizontal

section

sectionvertical

HH

W W

W/2 - 108.5

SINGLE LEAF= W - 42

W/2 - 24.5

W/2 - 108.5 7

21

W/2 - 24.5

21

W/2 - 118.5SINGLE LEAF = W - 136

W

W/2 - 118.55

68

5

68

H - 4

2 H

H - 1

266 21

216

H - 1

365

INSIdE OPEN WINdOW-COPLANAR




DOUBLE LEAF

SINGLE LEAF

12E1412

C0320

C0260

C0350

2W-4H


WING CLOSING PLUG

TERMINAL FOR ROD

3

1

2

ITEM

GASKET

E2104

E2110

E2102C0050

C0090

C0190

2W-4HE1330

E1336 1H

E1301 2W-2H

CREMONE EURO


FLASH BASE HINGE 3rd WING

ITEM

ACCESSORIESPROFILE


FLUSH BOLT FOR COMBINED WING


CONNECTIONS BLOCKS C/GASK1

C06602

C0620C03804

8

11

DESCRIPTIONS

ACCESSORIES

ITEMN. PCS N. PCS

DOUBLE LEAF

2W-4H

2W-4H

4W-8H

N. PCS

GASKET

ITEM

E2110

E2104

E2102



1

2

ITEM

C0090

C0190E1412

E1330

2W-2H

2W-2H

E1305

NUMBER

2W-2H

N. PCS

CREMONE EURO


DESCRIPTIONS

ACCESSORIESPROFILE

CORNER JOINT (IN PIECES)


DESCRIPTIONS

E2075

2

1

ITEM

C0660

N. PCS

8

6

N. PCS

ACCESSORIES

4W-4H

2W-2H

2W-2HN. PCS

FLASH BASE HINGE 3rd WINGC0050 2

DRAIN HOLE COVER R40/50C0350 2

2W-3HE2111

2W-2HE2111

CORNER JOINT (IN PIECES) E2075

SINGLE LEAFSINGLE LEAF

DOUBLE LEAF

INSIdE OPEN WINdOW-COPLANER




E1301

E1330

E1412

E1336

horizontalsection

sectionvertical

W/2 - 108.5

W/2 - 118.5SINGLE WING = W - 136

W/2 - 24.5


W

W/2 - 108.5

W/2 - 24.57

21

W/2 - 118.55

68

21

5

68

H - 1

36

H - 1

26 H

HH

H - 4

2

5

WW

6 21216

INSIdE OPEN WINdOW-OVERLAP




DOUBLE LEAF

SINGLE LEAF

12E1412

C0320

C0260

C0350

2W-4H


WING CLOSING PLUG

TERMINAL FOR ROD

3

1

2

ITEM

GASKET

E2104

E2110

E2102C0050

C0090

C0190

2W-4HE1330

E1336 1H

E1301 2W-2H

CREMONE EURO



ITEM

ACCESSORIESPROFILE




CONNECTIONS BLOCKS C/GASK1

C06602

C0620C03804

8

11

DESCRIPTIONS

ACCESSORIES

ITEMN. PCS N. PCS

DOUBLE LEAF

2W-4H

2W-4H

4W-8H

N. PCS

GASKET

ITEM

E2110

E2104

E2102



1

2

ITEM

C0090

C0190E1412

E1330

2W-2H

2W-2H

E1305

NUMBER

2W-2H

N. PCS

CREMONE EURO


DESCRIPTIONS

ACCESSORIESPROFILE



DESCRIPTIONS

E2075

2

1

ITEM

C0660

N. PCS

8

6

N. PCS

ACCESSORIES

4W-4H

2W-2H

2W-2HN. PCS

FLASH BASE HINGE 3rd WINGC0050 2

DRAIN HOLE COVER R40/50C0350 2

2W-3HE2111

2W-2HE2111

CORNER JOINT (IN PIECES) E2075

SINGLE LEAFSINGLE LEAF

DOUBLE LEAF





horizontalsection

sectionvertical

E1305

E1345

E1412 E1346

E1345 E1345 E1345 E1305

E130

5E1

345

E134

5E1

305

W

H

WH

W/2-24.5

W

5

21

W/2 - 146.5 W/2 - 146.5

W/2-24.5

57

21

H

H-15

477

77

H -

42

5H

- 164

21 6

21 65





DOUBLE LEAF

SINGLE LEAF

C0660 ADJUSTABLE TAB mm 17.2 10 E2104 2W-4H

PIN CONNECTION FOR 2250 mm.28C0310

C0320

C0190

C0260E1412

E1346

2W-4H1H

WING CLOSING PLUG

TERMINAL FOR ROD


1

2

2

2

ACCESSORIESPROFILE

C0110

ITEM

C0050

E1345

E1305

2W-4H

2W-2H

NUMBER N. PCS

CREMONE NOVAFLASH BASE HINGE 3rd WING

DESCRIPTIONS

ACCESSORIES

STARDUE/NOVA CONNECTION KIT

DESCRIPTIONS

FLUSH BOLT FOR COMBINED WING14

C0620C0360

N. PCS ITEM

11

N. PCS

GASKET

4W-8HE2110

N. PCS2W-4H

ITEME2102


PIN CONNECTION FOR 225 mm.28

C0360

C0310

C0110

C0190

C0260

E1412

E1345

2W-2H2W-2H

TERMINAL FOR ROD

CREMONE NOVA


ACCESSORIES

ITEM

C0050E1305

NUMBER

2W-2H

N. PCS

PROFILE

DESCRIPTIONS


1

CORNER JOINT FOR FRAME IN PCS

CORNER JOINT FOR SHUTTER IN PCS

2

2

2

1

E1416

E2075

4

4 4W-4H

2W-2HE2104

E2110


DESCRIPTIONS

ACCESSORIES

2

N. PCS

C0660

ITEM

8

N. PCS N. PCS2W-2HE2102

ITEM

GASKET

SINGLE LEAF

CORNER JOINT FOR FRAME IN PCSE2075 4

CORNER JOINT FOR SHUTTER IN PCSE1416 4

SINGLE LEAF

DOUBLE LEAF DOUBLE LEAF

OUTSIdE OPEN WINdOW- COPLANAR




horizontalsection

verticalsection

E1345

E1301 E1412 E1346

82

W

W

W/2-24.5

5

H

21

W

H -

42

77

H

SINGLE WING = W-164

W/2-24.5

W/2-136.5

W/2 - 146.5 7

W/2-136.5

82

5W/2 - 146.5

21 6

21

WH

55

H - 1

64

21 6

H-15

477

OUTSIdE OPEN WINdOW - OVER LAP








WING CLOSING PLUG


TERMINAL FOR ROD

DESCRIPTIONS

FLASH BASE HINGE2W-2H

N. PCS

1H2W-4H

2W-4H

E1301

NUMBER

E1346

E1412

E1345

PROFILE ACCESSORIES

CREMONE NOVA

C026

C031

C032

C019

ITEM

C008C011 C062

C036

ITEM

C066

ACCESSORIES

2

2

1

2

N. PCS

41

DESCRIPTIONS



TERMINAL FOR ROD


FLASH BASE HINGE

DESCRIPTIONSN. PCS

2W-2H

2W-2H

2W-2HE1412

E1345

E1301

NUMBER

PROFILE

C0310

C0360

C0260

C0190

ACCESSORIES

CREMONE NOVA

C0080

C0110

ITEM

C0660

ITEM

ACCESSORIES

2

2

2

1

21

N. PCS DESCRIPTIONS


N. PCS2W-4H

4W-8H

2W-4H8

N. PCS

11

E2104

GASKET

ITEM

E2110

E2102

4W-4H

2W-2HN. PCS

2W-2HE2104

N. PCS

6

GASKET

E2110

E2102ITEM





DOUBLE LEAF

SINGLE LEAFSINGLE LEAFSINGLE LEAF

DOUBLE LEAF DOUBLE LEAF

OUTSIdE OPEN WINdOW- OVERLAP




sectionvertical

horizontalsection

ITEM

GASKET

E2104

E2110

E2102ITEM

C0080

E1412 2W-2H

PROFILE

E1301

E1345

NUMBER

2W-2H

2W-2H

N. PCS DESCRIPTIONS

FLASH BASE HINGE

ACCESSORIES

2

N. PCS

2W-2H

N. PCS2W-2H

4W-4HSAMBA-FLAT WINDOW HANDLEC0200 1

CORNER JOINT SCREW HOLLOW 25.4

CORNER JOINT SCREW HOLLOW 11

ADJUSTABLE TAB mm 17.2LASER TELESCOPIC ROD INOX

C0970

C0660

C0810

C0230

4

4

61

E1301

E1345

E1412 E1301

E1345

E130

1E1

345

E134

5E1

301

77

W

W - 154 77

W - 42 2121

56 W - 164 6

HH-

154

7777

H - 4

2

6 21

H - 1

645

6 21

H

W

TOP HUNG WINdOW




ACCESSORIES

sectionvertical

1W-2H

N. PCS

PROFILE

1W-4H

horizontal

E1413

E1324

E1338

E1309

NUMBER

E1426

ASSEMBLY KIT ALUMINIUM DOUBLE

BIKE DOOR HANDLE NYLON

CORNER JOINT IN PCS

1W

2W-4H

C0460

E1417

C0420

C0290 BUSH FOR THRESHOLD

6

1

1

1

DESCRIPTIONS

STRIKER PESOS/SUPERGIAPPESOS FLUSH BOLT FOOR DOOR

ACCESSORIES

2W-6H

C0270

C0280

ITEM

C0180


N. PCS

2

21

ITEM

section

N. PCSDESCRIPTIONSPIVOT HINGE FOR SWING DOORS

GASKET

2

ITEM N. PCS

1W-2HE1402DOUBLE CURVE

FLOOR CANCEALED DOOR-CLOSER 2

LOCK 1

E2102 2W-4H

E2104 2W-4H

POLIBOND 4W-12HPB 48x7 3PE2115 2W-6H

W

H

61

W/2 - 8076

61W/2 - 202

8

5 W/2 - 212 5

W11

0

H -

815

61

76

H - 2

52

H

H - 2

625

E1309

E1402

E1426

E1338

E1413

E1324

E1338 E1338E140

2

E140

2

E133

8E1

309

E1402E1402

SWING dOOR




sectionvertical

horizontalsection

HH

W W

H

H - 2

57

W

7171 71 71SINGLE WING = W - 244

W/2-190.5

W/2-200.5

W/2 - 68.5W/2 - 68.5

W/2-190.5

W/2-200.555

H - 8

6

H - 2

675

5

7110

E1309 E1338

E1343

E1337

E141

3E1420

E1324

OUTSIdE OPEN dOOR




DOUBLE LEAF

SINGLE LEAF

N. PCS

N. PCS

SINGLE LEAF

DOUBLE LEAF

C0730

E1420 1W

CENTRAL PLUG DOUBLE SASH

C0290

C0280

C0270

C0180C0010

C0400

C0660

E1324

E1343

1W

1W-2H

E1338

E1413

E1337

E1309

4W-4H1W-3H

1W-2H

1H

BUSH FOR THRESHOLD

HANDLE MASTER



PESOS FLUSH BOLT FOR DOOR

STRIKER PESOS/SUPERGIAPHINGE 2 WINGS

ACCESSORIES

ITEM

PROFILE


E1420 1W

---

C0660

E1417

C0400

ITEM

C0010

E1324

E1343

1W

1W-2H

E1413

E1338

E1309

NUMBER

1W-2H2W-2H

N. PCS

1W-2H


LOCK


DESCRIPTIONS


ACCESSORIESPROFILE

2

CORNER JOINT IN PCS

1

10

1

2

2

E1417

---14

LOCK E2110

E2104

E2102

E2114

1

6

1W

2W-4H

2W-6H

2W-4H

ACCESSORIES

ITEM DESCRIPTIONS

GASKET

ITEMN. PCS N. PCS

1

4

8

1

ITEM

2

DESCRIPTIONS

E2114 1W

E2102

E2104

E2110

ITEMN. PCS

2W-2H

2W-4H

2W-2HN. PCS

ACCESSORIES GASKET

SINGLE LEAF

DOUBLE LEAF

OUTSIdE OPEN dOOR




sectionvertical

horizontalsection

H H

W W

W/2 - 170.5

WL = W/2 - 48.5

SINGLE WING = W - 11251 5 515

W/2 - 170.5

WL = W/2 - 48.5


5W/2-180.5

W

122

W/2-180.5 5

122

110

H -

6610

61H

- 237

51

5

5

H

HL -

181

E1309

E1402 E1338 E1337

E1420

E1324

E141

3

INSIdE OPEN dOOR




DOUBLE LEAF

SINGLE LEAF

DOUBLE LEAF

GASKET

ITEM

E2110

E2104

E2102C0010

ITEM

C0400E1337

E1413 4W-2H1W-2H

PROFILE

E1309

NUMBER

1W-2H

N. PCS


DESCRIPTIONS

SINGLE LEAF

CORNER JOINT IN PCS


E1417

1

ACCESSORIES

C0660

N. PCS

2

4

8

2W-4H

4W-2H

4W-2HN. PCS

E1324 1W

E1402 1W-2H

E1420 1W

LOCK 1---

E2114 1W

N. PCS

E1420 1W

---

C0660

C0400

C0010

ITEM

E1324

E1402

1W

1W-2H

E1413

E1337

E1309

NUMBER

4W-4H

1W-3H

1W-2H

N. PCS

LOCK


HANDLE MASTER

DESCRIPTIONS

HINGE 2 WINGS

ACCESSORIESPROFILE

1

6

10

1

ITEM

4

DESCRIPTIONS

E2114 1W

E2102ITEM

E2104

E2110

N. PCS

4W-4H

2W-6H

4W-4HN. PCS

ACCESSORIES GASKET

E1338 1H

C0180 STRIKER PESOS/SUPERGIAP 1

C0270 PESOS FLUSH BOLT FOR DOOR 2

C0280 SAFETY TERMINAL FOR 2150 2

C0290 BUSH FOR THRESHOLD 1

C0730 CENTRAL PLUG DOUBLE SASH 2

CORNER JOINT IN PCSE417

SINGLE LEAF

DOUBLE LEAF

INSIdE OPEN dOOR




E1305 E1330

E1412

E1336

2

2

E1330E1330

E133

0E1

305

559

531 3147

531

4221

6

4220 20 2042

7

42

47 6

20

31 5

21

3

1

3

1

3

INSIdE OPEN WINdOW - COPLANAR




E1301 E1330 E1336

E1412

E132

2E1

320

2

2

E133

0E1

330

E130

1E1

330

E133

0E1

301

E1330 E1330

21 42 20

6 7

20 42 42 20

475

31 315

595

31

55 5

20

56

4220

5

19205

4731 5

65

4220

5

31

5

66

2042

39

5

5

5

2042

65

2721

9631

3147

3

4

1

5

6

3

4

5

6

1

IN OPEN WINdOW WITH BOTTOM FIX LITE ANd BOTTOM HUNG WINdOW AT THE TOP




E1301 E1347

E132

0E1

347

E1301

E1345

E141

2

E1412

FIX PART

E130

1E1

345

E134

5

E1301

E134

5

E1345

E1301

521 57 25 20

47 76

5

57525

2020

25557

21

576

765

475 5

5

1920

2720

55

6547

21

2156

6

76

475

25 20

76

2025

547

4 5

3

2

1

3

2

1

2

6

5

4

6

TOP HUNG WINdOW & FIX LIGHT




E1301 E1345 E1346

E1305

E1412

E1412

E141

2

E1345

2

33

2

3

E134

5

E1345 E1345

E130

1

COPLANAR

OVER LAP

25 20

5

20

5

25 59

5

25 20

7677676

20255

76

5 2025

76

47

21

21

47

21

47

1

1

1

OUTSIdE OPEN WINdOW COPLANAR & OVERLAP




E1301 E1347 E1345 E1346

E132

0

E1412

2

2

E134

5E1

301

E1345 E1345

521 57 25 20 525

1927

47 76

5

76

6547

2025

557

76

5

5 5

55

5

5

76

255

7

59

1515

15 20

20 20

1

4

3

1

3

4

TWO LEAF OUTSIdE OPEN WINdOW WITH FIX LITES




E1330

E1412

E1421

E1301

E1422

2 3

2 3

11 1

32.5 34

32.5

20.5

20.5

INSIdE OPEN WINdOWS WITH FLY SCREEN




E1309 E1426 E1338 E1413

E1402

E1324

E1420

E1413

2 3

1

4

2 3

4

1

E2114

E1426

E1426

E1338

E142

6

E142

6 E1338

E142

6

E133

8E1

309

51 20

5

20

71 5

5 2051

571

81

20 41 20 41 20

8

20 41 20

81881

2041

20

8113

0

110

1020

5

dOUBLE SWING dOOR




E1311

E140

2

E1337

E1326

E1413 E1412

1 2

21

E1337

E140

2

39 5 61 20 20 61 5 2039

125 145

59

5

61 61

5

79

5 5 5

SHOP FRONT WITH WITH INSIdE OPEN dOOR




E1309 E1337

E140

2

E1338

E1324

E1413

E1420

2

33

2

3

44

4

E133

7E1

309

E1337

5

51 61 20

5

20 41 61 20

71 615

815

61

5

5110

110

2020

61

130

615

71

555

55

1

1

ONE & TWO LEAF dOOR INSIdE OPENING




E1309 E1343 E1338 E1337

E1324

E1420

E1413

E1413

2

2

E133

8E1

309

E343

E1338

130

1011

020

2041

55

20 415

61 2051 405

41 205

71 5 81 81 5 61

81

5

71

4051

3

4

1

3

4

4

3

1

ONE & TWO LEAF dOOR OUTSIdE OPENING

TOOLINGS




E1230

E1330

E1331

TOOLING FOR INSERTION OFCONNECTION ROD COD. E1401

E1231

TOOLING FOR CREMONE

E1330

E1230

E1331

E1231

CASEMENT 45i

CASEMENT 45

C0090

C0140

869

910

4

0.65

Ø5.5

13.9

7.2

13.97.2

4.5

1520

TOOLING HANdLE




Ø4.8x13 DIN7982

Ø4.8x13 DIN7982

Ø4.8x13 DIN7982

EXAMPLE PROFILES

E1201

SYSTEM 45 SYSTEM 45i

E1301

E1231 E1311

E1209 E1309

EXAMPLE SCHEMES CORNER JOINT

E2075

E1416

E1417

Ø7 Ø7

27 +0.553 +0.5

27 +

0.5

53 +

0.5

53 +0.5

53 +

0.5

27 +

0.5

27 +0.5

25.4

53 +0.527 +0.5

53 +

0.5

27 +

0.5

37.4

Ø7Ø7

Ø7Ø7

Ø7Ø7

Ø7Ø7

Ø7Ø7

11.0

CORNER JOINT




INSIDE OPENING

E1209 E1402 E1237E1402 E1237E1211

E1402E1309 E1337

C0010 or C0020

E1311 E1402 E1337

C0010 or C0020

C0010 or C0020

C0010 or C0020

INSIDE OPENINGINSIDE OPENING

45

20

45

100

34

31 20 5 36

61 20

39 5 61 20

5950

120

50

3120

20 36

61 20

5

34

2061539

2020

TOLL MOUNTING HINGE FOR dOORS




OUTSIDE OPENING

Sections, profiles, accessories and weatherstrip shown are licensed by BALEXCO

E1243E1211 E1238 E1209 E1238E1243

C0030 or C0040

C0540+C0550

E1343E1311 E1338 E1309 E1338E1343

C0030 or C0040

C0540+C0550

C0540+C0550

OUTSIDE OPENING

C0010 or C0020

C0010 or C0020

OUTSIDE OPENING

91 20412079 41

2041

20

81

79

39.5

100

25

31.5

5

34

20

2091 41

45

8128.5 42.220

5 35.5

45

5

20

81

120

5

25

39.5

31.5

5

34

20

50

35.5

20

81

5

28.5 42.5

50

59

5

TOLL MOUNTING HINGE FOR dOORS




TOOLING FOR TRANSOMS

17 43 72

72 72

31

65 91 130

130

79

130

16.5

24

Ø5Ø11.

5

Ø11.

5

Ø5

24Ø1

1.5

Ø5

100

39.7

44.7

24 24 24 24 29 29

29292929

24 24

39.7

44.7

Ø5Ø1

1.5

2445

44.7

14.0

16.9

44.7

E1220 E1222 E1223

E1224 E1225

E1226

SCREW Ø4.8x32 DIN7981

E1201 E1230

E1237

E1211




E1320 E1322 E1323

E1324 E1325

E1326

SCREW Ø4.8x32 DIN7981

E1301 E1330

E1337

E1311

17 43 7265 91 130

130

79

130

16.5

24

Ø5Ø11.

5

Ø11.

5Ø5

24Ø1

1.5

Ø5

24 24 24 24 29 29

49.7

72 29 29 2929 72

31 2424

44.7

44.7

49.7 57

.312

0

Ø5

24Ø1

1.5

5059

49.7

49.7

17.5

TOOLING FOR TRANSOM




TOOLING FOR WATER dRAINAGE

SLOT 20x5

DRAIN HOLE COVER

WATER DRAINAGETOOLING SLOT FOR WATER DRAINAGE

MAX. DISTANCE BETWEEN SLOT 900mmNO. 2 SLOT MINIMUN

DET.A

DET.A DET.A

50

INTERRUPTION OF GASKETON FRAME FOR PRESSUREEQUALIZATION

DETAIL "A"

WATER DRAINAGE POSITION FIX PARTWATER DRAINAGE POSITION

5050150 150

100156

100156

==

156 156

30

8

100 100




DRAIN HOLE COVER

SLOT 20x5WATER DRAINAGE

DET.A

MAX. DISTANCE BETWEEN SLOT 900mm

TOOLING SLOT FOR WATER DRAINAGENO. 2 SLOT MINIMUN

WATER DRAINAGE POSITION

DET.A DET.A

ON FRAME FOR PRESSUREINTERRUPTION OF GASKET

50

EQUALIZATION

DETAIL "A"

WATER DRAINAGE POSITION FIX PART

30

8

150

156100

15050 50

156100

156

=

156

=

100 100

30

8

TOOLING FOR WATER dRAINAGE




TOOLING FOR FLY SCREEN

DETAIL 'A'

TOOLING AND ASSEMBLINGOF CORNER JOINT

DETAIL 'C'

'A' 'B'

CUT DIMENSIONS FORTRANSOM CONNECTORPROFILE E1423

SCREW 4.2x9.5 DIN7982

E1421

CORNER JOINT CODE: C076

DETAIL 'B'

CONNECTORFOR TRANSOM

E1422

TOOLING ON TRANSOMFOR FLY SCREEN

SCREEW 2.9x9.5 DIN7982

TOOLING AND ASSEMBLINGOF CONNECTOR FOR TRANSOM

DETAIL 'C'

SCREW 4.2x13 DIN7981

REMOVABLE HANDLE TO HOLDTHE FLY SCREEN DURING THEFIXING OPERATIONS

MILLING OPERATIONTO REMOVE THE HANDLE

E1421

TOOLING ON FIXED FLY SCREENFOR WATER DRAINAGE

HIGH

T FL

Y SC

REEN

E1421

18 +0.1 -0.1

30Ø6

Ø3.5

Ø3.5

Ø630

14.2

7.9

21.6= =

3.5

20

Ø2.5

Ø2.5

90°

6.2

14Ø6Ø3

.5

432

.526

.36.

2

30

19

5

12.3

90°

R2.5




E1238

PB 48.700.3P

E1426 E1426

E1238

PB 48.700.3P

E1426 E1426

3.5x19 DIN7982

E1338

E1209

E1309

E2115 E1338

E1426 E1426

PB 48.700.3P

E1402 E1238

PB 48.700.3P

E1426 E1426

E2115

E1402

E1338

1919

24

15.0

19 19

24

15.0

1919Ø2

.5

Ø2.5

Ø2.5

Ø2.5

Ø2.5

Ø2.5

Ø2.5

Ø2.5

TOOLING FOR dOUBLE SWING dOORS




TOOLING FOR GLASS BEAdING

CUT OF THE POINTS

TOOLING ONLY TO THELAST GLAZING BEAD

INSTALLATION SEQUENSE OF THE LAST GLAZING BEAD

2nd Last

1st

3rd

1 2 3 4

120

120




Tool n°4 Tool n°4Tool n°3

Tool n°3 Tool n°3Tool n°1 Tool n°2

Tool n°5

TOOLINGS 2770489




TOOLINGS 2770489A

Tool n°6Tool n°6

Tool n°7

Tool n°6

Tool n°10Tool n°9Tool n°8




E1209Atm.min : 1

10E1413Atm.min : 1

5

E1232

E1410

E1310Atm.min : 1

Forcella n °2

Forcella n °3 7E1232

6 Serie 45 : Sq.tta 1159.1 (28.4X37.4) E1209 (con forcella n °3) - E1237 - E1238 Serie 45 : Sq.tta 1153.3 (41.4x10.6) E1200 - E1201 - E1204 - E1205 -E1210

E1230 - E1212 - E1232 - E1233 - E1249Serie 45 : Sq.tta 1156.2 (41.4x25) E1211 - E1231 - E1245Serie 45 : Sq.tta ?? E1208Serie 45 : E1239 - E1240

E1413

Atm.min : 3

E1232E1401

Atm.min :

106

Atm.min : 2.5

1 8

2

E1410

Atm.min : 2

E1337Atm.min : 2

6

3

Atm.min : 2 9 4

E1220

Atm.min : 3

Serie 45 : E1230 - E1231 - E1232 - E1233 - E1245 - E1249Serie 45I : E1330 - E1331 - E1345

Serie 45 : E1200 - E1201 - E1202 - E1203 - E1204 - E1205 - E1206 - E1207 - E1209 E1220 - E1222 - E1223 - E1224 - E1225 - E1212 - E1229 E1210 - E1211

Serie 45I : E1300 - E1301 - E1304 - E1305 - E1309 - E1320 - E1324 - E1325 - E1323

Serie 45 : Sq.tta 1153.5 (22.7x10.6) E1243 Serie 45I : Sq.tta 1153.5 (22.7x10.6) E1343Serie 45I : Sq.tta 1159.2 (22.7x37.4) E1337 - E1338Serie 45I : Sq.tta 1156.4 (21.4x25) E1345 (con forcella n °1)

Serie 45 : E1230 - E1231 - E1232 - E1233 - E1245 - E1249Serie 45I : E1330 - E1331 - E1345

2 E1401

3

4

5

1

EQUIPMENT 2770489




EQUIPMENT 2770489

Atm.min : 2.5

7E1330

4 4

Serie 45 : E1413 - E1414

E1200

Atm.min : 2.5

6

E1320

E1311

E1200-1201-1204-1205

6

E1210

E1310

6E1243

E1345

Forcella n°13 3

Serie 45I : Sq.tta 1159.1 (28.4X37.4) E1309Serie 45I : Sq.tta 1153.2 (67.5x10.6) E1310 (con forcella n °2)Serie 45I : Sq.tta 1156.1 (67.5x25) E1331 (con forcella n °2)Serie 45I : Sq.tta 1153.4 (28.7x10.6) E1300 - E1301 - E1304 - E1305 -E1314

E1330 - E1310Serie 45I : Sq.tta 1156.3 (28.7x25) E1311 - E1315 - E1316 - E1331Serie 45 : E1230 - E1232 - E1233 - E1249Serie 45I : E1330

Serie 45 : E1410 - E1411 - E1412Serie 45 : E1410 - E1411 - E1412

Serie 45 : E1413 - E1414

9

10

8

7




IFC-IBC-OBC.indd 3 31/1/12 10:26:36

The System described is subject to design

changes or improvements with or without notice

and Balexco will accept no liability on the final

application or use of the system.

Bahrain Aluminium Extrusion Company (Balexco)

HEAd OffiCE, SitrA: P.O. Box 1053, Manama, Kingdom of Bahrain Tel : +973 17730073, +973 17734459, Fax : +973 17736928/29, +973 17736517

Email : [email protected], Website: www.balexco.com.bh

BALEXCO, (SALmABAd): P.O. Box 1053, Manama, Kingdom of Bahrain Tel: +973 17877110, Fax: +973 17789088

UAE OffiCE: Flat 102, Khalid Bin Al Waleed Road P.O. Box 12185, Hamriya Street, NBQ Bldg, Dubai, UAE.

Tel : +971 4 3973170, Fax : +971 4 3973570. Email: [email protected]

SAUdi ArABiA OffiCE: Saudi Bahraini Aluminium Extrusion Co. P.O. Box 440, Riyadh 11391, Kingdom of Saudi Arabia.

Tel: +966 1 2442060, Fax: +966 1 2441091

IFC-IBC-OBC.indd 4 31/1/12 16:02:09

balexco 45 series

Documents