bank of · pdf filelist of works completed in the last ... part 'a' will be opened...

1

2.

3.

4.

5.

6.

7.

1.

2.

3.

4.a) The Tenderer shall furnish copies of :

i) IT Registration Certificate with No.

ii) Sales Tax Registration Certificate with No.

iii) Service Tax Registration Certificate with No.

iv) Electrical Contractor's License with No.

v) Electrical Supervisor’s License with No.

5.

a)

b)

c)

d)

e)

1.

2.

Part 'B' of the tenders will be opened for those only who fulfils the qualifying criteria given in the tender document.

The unopened part 'B' along with Earnest Money deposit for those not fulfilling qualifying criteria will be returned.

Clarifications, if any, required on drawings, schedules, specifications, etc. can be obtained from our Consultant M/s.

ab Consultant Pvt Ltd CJ-276, Sector II,Salt Lake city Kolkata 700 091 Phone No -033

23372165.03323586653,9903900971

The Tenderer should also submit the following documents along with the Tender.

List of technical persons available on hand, years of their association with the firm & proposed to be engaged for the

subject work, if selected (marked Annexure-IX) ;

The bank will not be bound to accept the lowest tender and reserves the right to accept or reject any or all tenders

without assgming any reason whatsoever.

marked Annexure - VI

marked Annexure - VII

marked Annexure - VIII

List of works in hand indicating description of work, contract value, approximate value of balance work yet to be

done and date of award (marked Annexure-XII)

Contractors will be required to arrange for their own storing. Dismantled materials are to be carted away from site at

their own cost and disposed of in conformity with Municipal regulations.

Tenderer who will quote the rate must have a local office at Kolkata. This is absolutely essential for day to day

supervision & coordination of the work at site.

All informations are to be fully authenticated & documented failing which the documents submitted will not be accepted.

GENERAL TERMS & CONDITIONS

The tenderer are to visit the site and acquaint themselves with site conditions before quoting rates.

Bank of Baroda

Bank of Baroda, West Bengal, Sikkim & A & N Island invites sealed tenders in two bid system for the proposed

Civil,interior & electrical work of Kharagpur Branch,Pushpanjali Apartment,468/A/241 Malancha Main Road Po

Nimpura Kharagpur Dt Midnapur(W), West Bengal-721204. The work is to be completed within 15 Days.

List of important plant & machinery available on hand (own) and proposed to be inducted (own & hired to be given

separately) for carpentry & electrical work (marked Annexure-X)

List of works completed in the last (three) financial years under Bank / Govt., Semi - Govt,Govt. undertaking /

Corporate Sectors giving description of work, organisation for whom executed, approximate value of contract at the

time of award, date of award and date of scheduled completion of work, date of actual completion and final value

of contract should also be given (marked Annexure-XI)

marked Annexure - V

(Government of India Undertaking)

NOTICE INVITING TENDER

Interested agencies having experience in work of similar nature & magnitude and fulfilling the eligibility criteria given

below may download detailed tender document from Bank's Website http:bankofbaroda.com/tenders.asp

marked Annexure - IV

The tenderer should have completed in last three Financial years (i.e. current year & two previous financial year) in

Bank, Govt. or Govt. undertaking and Financial Institutions, Corporate Sectors, etc. minimum 3 (three) similar

composite work (Interior Furnishing & Electrical) costing not less than Rs. 10.00 lacs in single contract. (Work order &

completion Report in support must be submitted & marked as Annexure-I)

The total contract amount received by the Tenderer during the last 3 financial years should be minimum as 40.00 lacs

per year in contract work. In support of this the Tenderer should submit audited sheet duly Certified by the Chartered

Accountant & marked Annexure-II.

The Tenderer should produce Solvency Certificate from any Nationalised / Scheduled Bank for an amount of 200% of

the advertised Tender value marked Annexure-III.

Part 'A' envelope (Technical Bid) shall contain : Earnest Money, the documents for satisfying eligibility criteria & the

technical & financial stipulation, if any, of the tenderer & Part 'B' shall contain : financial bid along with a copy of the

tender document, duly signed in all pages both shall be separately sealed & submitted in another sealed envelope

to the Asst. General Manager, Bank of Baroda, West Bengal, Sikkim & A & N Island, BARODA TOWER, Plot No. 38/2, Block

GN, Sector-V, Salt Lake City, Kolkata : 700 091, before 2.30 P.M. on 30.07.2012 along with Earnest money amounting to

Rs.10,000/- by Bank Draft / Pay order in favour of Bank of Baroda shall be submitted in Part 'A'.

MINIMUM ELIGIBILITY CRITERIA (Shall be submitted with Part A of the Offer)

Part 'A' will be opened at 3.30 p.m. on 30.07.2012.

1

3.

4.

5.

6.

7

8.

9.

10.

11.

The quoted rates, are to include cost of all materials, labour and or any other material, all statutory taxes, transport,

handling delivery at site and installation, complete in all respect, as per drawing, directions or instructions of

Employer/Consultant. The quoted rates are also to include dismantling of partitions, counters, old electrical wirings

etc. and stacking serviceable materials and disposal of debris, etc.

Prior approval of the Employer/ Consultant shall be obtained for colour and thickness of laminates to be used in the

work.

The arrangement for “ Wire Management " is to have prior approval of the Client.

The quoted rates shall remain firm during the entire currency of contract. No price variation for any causes

whatsoever, shall be entertained.

The time of completion shall be 15 days from the date of placement of order.

The offer shall remain valid for acceptance for a period of 30 days from the date of submission of offer.

The bank will not be bound to accept the lowest tender and reserves the right to accept or reject any or all tenders

without assgming any reason whatsoever.

Payments will be made once on completion by the Employer within 15 days after certification of bill by the

Consultant 10% of the total payable amount is to be retained as retention money and will become due for release

after expiry of six months from the date of completion of the installation & subject to satisfactory maintenance of the

executed work.

Tenders addressed to Asst. General Manager, Bank of Baroda, West Bengal & Sikkim Region and submitted at his

office at BARODA TOWER, Plot No. 38/2, Block GN, Sector-V, Salt lake City, Kolkata : 700 091, before 2.30 P.M. on

30.07.2012, accompanied by Earnest Money amounting to Rs. 10,000/- by Bank draft payable to Bank of Baroda

and other documents as mentioned in NIT. Part 'A' of the tenders will be opened at 3.30 P.M. on the same date.Part

'B' will be opened immediately after opening of Part 'A'.

2

SPECIFICATION OF MATERIALS FOR INTERIOR WORK

Sl.No. Description

1. Laminate

2. Ply & Block Board

3. Glass

4. False Ceiling & Accessories

5. Veneer

6.Textured Wall Paint

7. Glue

8. Locks

9. Aluminium Hardware Fittings

10. Brass Hardware

11.

Floor Spring

12. Screws

13. Casters

14. Sliding Drawers / Channels

15. Furnishing Fabric

16. Leather Foam

17. PVC Flooring

18. Carpet

Earl Behari / Efficient Gadjets

Make (s)

Metako / Allen / Crown with ISI Mark

India Gypsum Ltd.

Marino / Greenlam / Century / Archid

Green / Century / Archid / Austin

Modi / Indo Ashahi / Float Glass India Ltd.

Glamour or Favourite (Balla Industries)

Woven type "Harmony" range from "Vimal"

or equivalent

Bhor Industries or equivalent

Armstrong / Krishna / Premier

Durian / Century / Archid

ICI, Jenson & Nicholson / Asian paint /

Berger

Efficient Gadjets

Evrite Agencies Pvt. Ltd. / Nita Floor Spring

Nettle Fold

ICI, Spectrum, Heritage

Godrej / Secur / Yale

Brass Arts / Vijoy

3

SPECIFICATIONS OF MATERIALS FOR ELECTRICAL WORK

Sl.No. Description

1. Switch fuse / fuse switch units (HRC) (32A TPN & above)

2. Timer (TSQ 100)

3. Voltmeter & Ammeter

4. Voltmeter & Ammeter selector switches

5. Phase indicating lamp

6.

7. Capacitor

8. HRC fuses

9. Power Cable : XLPE

10.

11. HRC fuse base & carriers.

12. PVC terminals

13. 1.1 KV grade PVC insulated armoured aluminium cable (ISI marked)

14. 1.1KV 660V grade PVC insulated & sheathed / insulated copper wire &

flexible cords (ISI marked).

15. Moulded case circuit breaker

16. RCCB / ELCB

17. Switch fuse with rewirable fuses. (6A & 32A TPN)

18. Isolator

19. Changeover switch (on load type)

20. MCB distribution board

21. Distribution fuse board with rewireable fuses

22. Miniature circuit breaker / MCB type isolator

23. Contractors

24. Auxiliary contractor

25. 1/16 Amp Piano key type switch / flushed type plug socket

26. 6/16 Amp modular switch / socket, module plate & mounting M.S. /

PVC box.

27. 300W, 2 module electronic regulator

Make (s)

HAVELL’S / STANDARD

Vaishno / SIEMENS / ROSS controls

L & T

GE power / SIEMENS / L&T / Schneider

A. E. / IMP

ELMEX / ESSEN

SIEMENS / L & T/BCH

SIEMENS / L & T

KAYCEE / L & T

UNIVERSAL / GLOSTER / NATIONAL / NICCO

/

L & T / SCHNEIDER/LEGRAND

CPL (Genius) / ANCHOR (Roma) / CRABTREE

/

MK

ANCHOR (Roma) / CRABTREE / MK

ANCHOR / PRECISION / SSK & RIDER

HAVELL’S / STANDARD

NATIONAL/FINOLEX/ HAVELLS

LEGRAND / SIEMENS

HAVELL’S / BPC / BOSMA

KENBAR / HAVELLL’S / ELCON / HPL /

CONTROL & SWITCHGEAR.

LEGRAND/ SIEMENS

A E / KAPPA SEGC & CONTROLS / CONTROL

CROMPTON/SIEMENS

TATA LEVERT/NEUMERIC/ KIRLOSKAR

GLOSTER/INCAB/POLYCAB/CINOLEX

GE power / SIEMENS / L & T / SCHNEIDER

SWITCHGEAR

GE Power/SIEMENS/L&T/SCHNEIDEV

LEGRAND/ SIEMENS / L&T

4

Sl.No. Description

28. Ceiling rose

29. Holder

31. Luminous indicating type buzzer with cancellation push.

32. Alarm bell.

33. G.I. pipe

34. Steel conduits (conforming to IS in all respects)

35. Black enamelled

36. Galvanised

37. Non-metallic PVC conduit pipe

38. Compression type brass gland

39. Cable termination socket

40. Light fitting & lamps

41. Decorative/Ornamental /Chandelier / Light Fittings

42. Ceiling Fan

43. Exhaust fan

44. Industrial type socket & top

45. Telephone wire

46. Telephone Socket

47. Network Cable

48. Contractors

49. STARTERS

Make (s)

KAY / EPP / ANCHOR / JJ

Good local make with minimum wall

thickness of 3 mm. for 19 / 20 mm. and 25mm

sizes & 2.5 mm. for 12mm. sizes

BEC / SUPREME / AKG

BEC / SUPREME / AKG

BST / BANSAL

KHERAJ / GETCO

KAY / EPP / ANCHOR / JJ

NATIONAL / HOMA / EQUIVALENT

DOWELL'S

WIPRO or equivalent

DOWELLS / JOHNSON / COMET

PLAZA / KALINGA/ PRECISION/AKG or

equivalent

FINOLEX or equivalent

L & T / SIEMENS

CROMPTON / POLAR / KHAITAN

NORTH WEST / CABTREE

CROMPTON / POLAR / KHAITAN

HAVELL’S / CROMPTON / LEGRAND

FINOLEX / RRK/NATIONAL

CRABTREE/MK

CROMPTON / POLAR / KHAITAN / EPC

5

k

Section A : Civil & Furnishing Work

Sl. No. Description of Item Qty. Unit Rate (Rs.) Amount (Rs.)

1 GYPSUM CEILING : Providing and fixing 12.5mm thick

Gypboard conforming to IS 2095-1982 on metal frame

suspended from RCC roof having following sizes:

Intermediate channel – 45 x 0.9 x 15mm to be placed at 1220mm

c/c.

Ceiling angle – 25 x 10 x 0.55mm to be hung from the RCC roof

with rawl plug and clip to be placed at 1220mm c/c.

Ceiling Section – 0.55mm x 51.5mm x 26mm x 10.5mm lipping

to be fixed with the intermediate channel with the help of

connecting clip placed at 457mm c/c. Jointing and finishing to

be done as per manufacturers guidelines.

Rate shall be inclusive of any vertical ceiling part, spot, tube

light, fans, AC grills, fire and security systems cutouts with

framing, and finishing with necessary jointing compound, paper

tape.

185 Sq.m

2 GRID TYPE CEILING : Providing & fixing 6 mm thk. falce ceiling

supported by hot dipped galvanised zinc coated members as

followes. Main Runner :- G.I. Channel 0.4 mm thick .

Weight 0.369 kgs / mtr @ 1.2 mtrs c/c.

Primary cross runner :- G.I. Channel 0.4 mm thick . Weight

0.325 kgs / mtr @ 600 mm c/c. Secondary

runner :- G.I. Channel 0.4 mm thick . Weight 0.325 kgs / mtr

placed at the centre of the primary runners.

G.I. Wall Angles :- 0.35 mm thick weight : 0.23 kgs / mtrs.

including masonary work , accessories , screws etc.

30 Sq.m

3 Solid Partition (Partition Type – 1 as marked in the drawing)

: Providing and fixing partition framing upto ceiling level.

Framing shall consist of 50 x 50 mm wood member, at 600 mm

c/c bothways horizontally and vertically. Above false ceiling,

alternate vertical sections to be extended upto main ceiling and

to be fixed with MS cleats. Framing to be covered on both sides

with 6 mm thick BWP ply finished with 1mm thick laminate of

approved shade and colour,in one side and other side will be

enamel paint. Necessary groove work, beadings, moulding and

75 x 12 mm t.w. skirting duly polished. The item is to be finished

complete in all respects. (Tenderer should visit the site and

check the actual floor height – Partition to be measured upto

false ceiling height excluding door opening for Billing purpose)

40 Sq.m

ESTIMATE FOR CIVIL, FURNISHING, SANITARY PLUMBING, ELECTRICAL WORK FOR KHARAGPUR BRANCH OF BANK

OF BARODA

k


4 FULL HEIGHT PARTLY GLAZED PARTITION (Partition Type

– 2 as marked in the drawing): Providing and fixing partition

framing upto ceiling level. Framing shall consist of 50 x 50 mm

wood member, at 600 c/c bothways horizontally and vertically.

Above false ceiling alternate vertical sections to extend upto main

ceiling and to be fixed with MS cleats. Framing to be covered on

both sides with 6mm thick BWP ply finished with 1mm thick

laminate, necessary groove work, beadings, moulding and 75 x

12 mm t.w. skirting duly polished. Upto a height of 900 mm from

FFL and from 2100 mm upto the false ceiling, the partition

should be made solid / fully blocked; from 900 mm to 2100 mm

clear glass of 8 mm thickness etched as per direction of the

Consultant fixed with t.w. moulding of 19 x 35. The item is to be

finished complete in all respects. (Tenderer should visit the site

and check the actual floor height – Partition to be measured upto

false ceiling height excluding door opening for Billing purpose).

20 Sq.m

5 LOW HEIGHT PARTLY GLAZED PARTITION (Partition Type

– 3 as marked in the drawing) : Providing and fixing partition

framing upto total height of 1500 mm. Framing shall consist of 50

x 50 mm wood member, at 600mm c/c bothways horizontally and

vertically. Framing to be covered on both sides with 6mm thick

BWP ply finished with 1mm thick laminate upto 1050 mm height,

necessary groove work, beadings, moulding and 75 x 12 mm t.w.

skirting duly polished and above 900 mm level, glazed by 8mm

thick 300mm high glass etched as per approved design upto

450 mm height. The item is to be finished in all respects.

(Partition to be measured excluding door opening for Billing

purpose).

40 Sq.m

7 FLUSH DOOR : Providing and fixing in position 35 mm solid

core flush door finished with 1mm thick laminate as per design

on both sides duly polished, t.w. lipping on two vertical and

horizontal edges having cylindrical lock, door stopper, brass

hinges, etc. Also providing 75 x 62.5mm second class t.w.

frame having t.w. lipping fixed in either surface of the frame duly

polished with 3 coats of lacquer melamine and fixed to the

partition frame.

10 Sq.m

k


8 PARTLY GLAZED DOOR : Providing and fixing in position 25

mm solid core panel door finished with 1mm thick laminate on

both sides upto 1050 mm height, t.w. lipping on two vertical and

horizontal edges, cylindrical door lock, door stopper, etc., 75 x

62.5mm second class t.w. frame with t.w. lipping, 8 mm thick

glass with necessary etching and / or frosting to be provided as

per design / directions, fixed with wooden mouldings from both

sides. All exposed woodwork to be melamine polished. The

work should be finished as per specification, design and

completed in all respects.

6 Sq.m

9 STORAGE UNIT : Providing and placing in position Storage

units fabricated out of 19mm thick BWP block board on all sides,

backing and separators will be of 6mm thick BWP ply, shelves

and shutters will be of 19mm thick BWP solid ply. The top, sides,

shutter front and back sides (if exposed) to be finished with 1mm

thick laminate with necessary grooves and the exposed edges of

block board should be finished with 6mm t.w. lipping. Inside of

the unit will be polished in matching tone. Unit should be

provided with locks, hinges, sliding drawer channels, handles,

ball catchers and tower bolt fixed. There should also be a 75 x

12 mm t.w. skirting with grooves as per design polished in

matching tone.

10 Sq.m

10 WRITING LEDGE : Supply, fitting and fixing 19mm thick

granite slab at a height of 1050mm from FFL with machine

polished moulded edges (950 x 300mm) of approved shade and

quality to portion of wall, including cutting chase in wall and

mending good the damages, the slab supporting itself of 50mm

dia stainless steel pipe inside filled with wooden section of

appropriate size and shape to form writing ledge.

1 no.

11 VERTICAL BLIND – Providing and fixing 100mm wide vertical

Blinds of approved shade of Vista Levolor / Marvel/ Mac make .12 Sq.m

12 Removing stains,Washing & Cleaning of existing Marble flooring

.LS

k


13 CERAMIC TILES : Providing and fixing 300 x 300 mm

ceramic tiles with rectified edge of approved shade with water

proofing adhesive Joints filled with pigmented white cement to

match with the colour of Ceramic tiles.

20 Sqm.

14 CERAMIC TILES : Providing and fixing 200 x 300 mm ceramic

tiles of approved shade with water proofing adhesive including

filling joints with pigmented white Cement to match the colour of

tiles..

60 Sq.m

15 PIN-UP BOARDS : Supplying and fixing pin-up boards

fabricated out of 12mm BWP ply covered with 12mm soft board

padding and upholstered with poly propylene fabric @ Rs. 150/-

per meter edges of soft board should have t.w. moulding duly

spirit polished.

2 Sq.m

17 Rendering the surface of walls and ceiling with Plaster of Paris

(thickness not less than 1.5mm) 20 Sqm

18 PAINTING : Providing and applying 2 coats of plastic emulsion

paint over 1 coat of primer of approved shade and colour on

walls, columns and ceiling. The job is inclusive of scraping,

leveling and preparing the surface, applying primer, etc.

380 Sq.m

19 ENAMEL PAINING : Providing and applying 2 coats of enamel

paint over 1 coat of primer of approved shade as per direction of

the Architect. The job is inclusive of scraping, leveling and

preparing the surface, applying primer, etc.

50 Sq.m

20 Proving 12 mm plaster in walls / ceiling in sand cement mortar

(1:4) including rounding off or chamfering comers as directed

including curing complete as per the direction of the Architect.10 Sq.m

k


23 Providing & fixing Wall Paneling with 6 mm BWP ply and 1mm

thick laminate of approved shade and colourwith 25 x 25 wooden

framing at 450 mm c/c bothways.

30 Sq.m

TOTAL Rs.

Section B : Sanitary Work


1. Providing and fixing PVC pipes in floor including covering the

same with concrete. The item includes all accessories such as

Floor traps, bends, etc. The item includes joining the same to

existing pipes, manhole/ GT outside including making necessary

digging and covering the same later. The item also includes

necessary liasoning with concerned authorities complete to

the satisfaction of architect / employer

1.1 100mm dia pipe 12 Rmtr

1.2 80 dia pipe. 12 Rmtr

1.3 Providing and fixing GI pipes including all accessories such as

bends, elbows etc. The item includes making chases in walls /

floors as the case may be and making them neat later. Item also

includes joining with main water supply as per instruction of

architect / employer 12 mm nominal bore. item includes

connection with existing building pipeline/ tanks.

12 Rmtr

2. WC EUROPEAN : Providing and fixing Parryware Chinaware

water closet (of approved colour) with P / S trap together with

flush valve of approved make having 40mm dia lead pipe

concealed in wall, chasing and making good etc., including solid

plastic seat and cover of approved make & shade having brass

hinges and rubber buffer and connection of anti siphonage all

complete with 10 litre capacity PVC AUTO flushing cistern with

CI brackets including taking out existing pan with traps and

flashing cistern including damaged CI specials if any and

removing the same from the site.

2 nos.

3. Providing and fixing white vitreous china flat back front urinal of

465 x 355 x 265 mm size with automatic flushing cistern of 5

litres capacity with CI brackets, standard size of GI flush pipe

and spreaders with brass unions and GI clamps complete,

including making good the walls and floors wherever necessary.

2 no.

k


4. WASH BASIN : Providing and fixing Parryware basin size 500 x

400mm basin with pedestal (of approved colour) to wall with

brass cast type bottle trap, waste coupling , 32mm dia waste

pipe and chain plunge complete in all respects

2 nos.

5 Providing and fixing Jaquar make contiental collection Pillar

cock, Stop cock and Bib cock etc with wall flange.

a Pillar cock Cat No. 011 2 nos.

b. Angular Stop Cock Cat No. 051. 6 nos.

c. Bib Cock. Cat No. 035 4 nos.

6 COAT HOOKS : Providing and fixing CP brass coat hooks of

approved make and quality. 2 nos.

7 LIQUID SOAP DISPENSER : Providing and fixing Liquid soap

dispenser with Glass bottle of Jaquar Continental collection

Model No. 1135N.

2 nos.

8 TOWEL RAIL : Providing and fixing CP towel rail 600 mm longof

Jaquar make Model No. 1111.2 nos.

9 MIRROR : Providing and fixing 5 mm thick mirror (I.S.

3438/1965) in toilets with backing of 12mm BWR ply and edges

finsihed with plished teak wood moulding.

2 Sq.m

10 Supplying fitting and fixing of round shape 50mm dia C.P. waste

grating.3 no.

11 25mm thick marble partition slab with white adanga marble

square cut, polished sides with two front corners rounded and

edges complete.

2 Sq.m

12 Taking out existing toilet fixtures, pipe lines and removal of the

same from the site as per local Municipal rules.1 Job

TOTAL Rs.

k


Section C : Electrical Work

1a. Main Switch : Providing & fixing of 415V 125A TPN SFU with

HRC fuses on angle iron frame on wall concealed. Including

connection from Meter board.1 No.

1b. Providing & fixing of 415V 63A TPN SFU with HRC fuses on

angle iron frame on wall. Including connection from generator

supply.1 No.

2. Earth Busbar (For Computer System) : Providing & Fixing

earth busbar of 25 x 3 mm copper strip for connection to UPS

and earth station1 RM

3. EARTH BUSBAR : Providing and fixing earth busbar of 50mm

x 6mm G.I. strip on surface for connections etc. as required. 1 RM

4. G. I. EARTH PIPE ELECTRODE : Earthing with G. I. earth

pipe 4.5 M long x40mm dia including accessories, and providing

masonry enclosure with cover plate having locking arrangement

and watering pipe etc. with charcoal or coke and salt at

alternate layer as required complete as required.

2 Sets

5. Earthing station : 600x600x3mm copper plate earthing station

with earthing resistance less than 2 ohms including watering

PVC/GI pipe with funnel ,excavation till7’0”or as instructed by

site-in charge, backfilling with compaction ,1no 25x3mm copper

flats connected to the copper plate till the existing ground level,

copper nuts & bolts, salt, and coal filling in layers 10”x10”

masonry chamber with sand plaster ,RCC, or cast iron lid

,inclusive of 5mtr conduiting of earthing of copper 10 SWG in

Black Enameled MS conduit to start from the ground level,

complete as directed in site manual.

1 No.

6. Supplying and laying G.I. earth strip 25x3 at surface for

connection to equipment & at 0.5 M below ground for

connection from earth electrode to earth busbar including

soldering etc. as required.

50 RM

k


7. CU Earth Wire: Providing & Fixing of 2nos 16sq.m. PVC

insulated copper Wire from earth busbar to UPS & from earth

busbar to earth station.40 RM

8a. 3.1/2 C PVC/A Al cable : Providing & Laying 3.1/2 C 95 sq.mm

PVC/A Al cable along with 2nos 7/10 SWG GI wire as earth

continuity wire. 40 RM

8b. 3.1/2 C PVC/A Al cable : Providing & Laying 3.1/2 C 25 sq.mm

PVC/A Al cable along with 2nos 8 SWG GI wire as earth

continuity wire. 40 RM

9a. Cable Termination : End connection of the above 3 1/2 core

95 sq.mm cable by double compression type brass cable gland

crimping type sockets, tapes etc 2 Set

9b. Cable Termination : End connection of the 3.1/2 x 25 sq.mm

by double compression type brass cable gland crimping type

sockets, tapes etc4 Set

10. LT PANEL at Ground Floor :-

Fabricating, assembling, painting, supplying, erecting, testing,

commissioning of Cubicle type LT panel board fabricated out of

2mm thick CRCA MS sheet with proper earthing attachment with

proper earthing attachment and provision of bottom /top

entry/exit for all cables including indicating lamps in all phases

showing ON/OFF condition.

INCOMING

1NO 415V 125A TPN SFU(MAINS)with HRC fuse

1NO 415V 63A TPN SFU(GEN) with HRC fuse

SFUS are Panel mounting Type

1 NO 4 strip horizontal (extension type)copper busbar

200A capacity for MAINS

1 NO 4 strip horizontal (extension type)copper busbar 100A

capacity for GENERATOR 1

NO 4P 415 V on load Change-Over Switch 200A capacity

1No flush square pattern 96mm square 0-500V range AC

voltmeter with phase selector switch of 3 positions and OFF

with HRC fuse links for protection. It should be fitted

on the incoming side of 125A SFU

1 NO square pattern 96mm square 0-200A range AC ammeter

with 3 nos CT of ratio 200/5 A and phase selector switch of 3

positions and OFF. It should be fixed on the out going side of

125A SFU

OUTGOING

4 NOS 415 V 63A TPN SFU with HRC fuse

The board should be complete with fabrication of all frames,

indicating lamps, danger board, interconnection with PVC

insulated unarmoured single core cable of appropriate sizes. All

cables, conduits, flexible conduits should be neatly laid and

armoured should be finished properly

1 No.

k


11. TPN DB FOR LIGHTING & COMPUTER : MCB-

Distribution Board - Supplying

and installation of 415/250V miniature circuit breaker distribution

board in 16SWG sheet steel enclosure, with double door,

internally wired, neutral end earth busbar, and each comprising

of following MCBs having short circuit level 10KA & `C` curve

characteristic. Each MCB Distribution board shall comprise of

following and including blank plates, inscription marking, phase

neutral and earth bars, mounted on M.S. Frame on wall

including cutting wall and mending good damages. Incoming -

1 No. 63A TPN MCB Outgoing – 2nos

32A TP MCB for connection to UPS 18Nos.

10A/16A/25A/32A SP MCB (Make of

DB & MCB: MDS / LT / SIEMENS/HAVELLS)

1 No.

12. TPN PDB FOR A/C & POWER SS : MCB-Distribution Board

Supplying and installation of 415/250V miniature circuit breaker

distribution board in 16SWG sheet steel enclosure, with double

door, internally wired, neutral end earth busbar, and each

comprising of following MCBs having short circuit level 10KA. &

`C` curve characteristic. Each MCB Distribution board shall

comprise of following and including blank plates, inscription

marking, phase neutral and earth bars, mounted on M.S. Frame

on wall including cutting wall and mending good damages.

Incoming - 1 No. 63A TPN MCB Outgoing - 12 Nos.

10A/16A/25A/32A SP MCB Make of DB & 2 nos. 32A TP MCB

1 No.

13. Sub Main Wiring from LT panel / Busbar to TPN DBs :

Supply and Fixing of Distribution wiring with4 X 10 Sq. mm + 2

X 6 Sq.mm Single Core 1100V grade PVC insulated unsheathed

stranded copper wire in in concealed 25mm dia PVC Conduit

Pipe partly laid over false ceiling & partly concealing of 25mm

dia PVC Pipe in Brick wall / floor / wooden partition / furniture

including including making good the damages. The supply and

laying of PVC Pipe, inspection boxes & other accessories are

included in the rate.

30 RM

k


14. Point Wiring (Concealed Type) – Point Wiring (Concealed

Type) –a)Supply & Fixing Point Wiring (Concealed Type)

including circuit (3x1.5 sq mm) FRLS 1.1kV grade unsheathed

stranded Copper Wire from DB to Switchboard & Switch Board

to Switch Board & Point Wiring from switchboard to individual

light, ceiling fan ,exhaust fan, wall bracket fan, call bell etc & 6A

Plug Socket with 3X 1.5 Sq.mm Single Core 1100V grade

unsheathed stranded copper wire in concealed 20mm dia PVC

Conduit Pipe partly laid over false ceiling & partly concealing of

20mm dia PVC Pipe in Brick wall / floor / wooden partition /

furniture including 16SWG thick MS Junction Box, CI Circular

Boxes with 3mm thick Hylam Cover ,brass screws and washers

painting of JB, cutting of brick wall & mending good damages.

The rate should include supplying and laying of all materials like

PVC conduit, inspection boxes, modular Switch Box, 6A Plate

Type modular Switch, Socket, Brass screws and any other

materials to complete the wiring, making connection and testing

etc, painting and mending good all the damages.

a. Incandescent / Fluorescent / PL Light Points. (from lighting DB)61 No

b. Wall / Ceiling /Exhaust fan points - do - 20 No.

c. 6A 5pin plug switch socket on same board. - do - 10 No

d. 6A 5pin plug switch socket on separate board. - do - 5 No

e. Call bell point with S & F bell push. - do - 1 No

f. Incandescent / Fluorescent / PL Light Points. from UPSDB12 nos.

g. 6A 5 pin plug with switch on separate board (from UPSDB)8 points

k


15. Power point Wiring : Supply ,Fixing /Laying Power point

concealed with 1100V grade single core 2X4 Sq.mm + 1X2.5

Sq.mm unsheathed stranded FRLS Copper Conductor in

concealed 20mm dia PVC Pipe partly laid over false ceiling &

partly concealing of 20mm dia PVC Pipe in Brick wall / floor /

wooden partition / furniture including making good damages .

The rate should include supply and laying of all materials like

PVC conduit Pipe, saddles, hooks inspection boxes and any

other materials to complete the wiring, making connection

testing, etc. painting and mending good to damages.

50 RM

(only black enamelled mild steel pipe should be used as conduit.)

16. Providing & Fixing of 16A Switch modular type , 16/6A

Socket shutter type concealed MS Switch Box , Cover etc. for

raw power. 7 No

17. Power point Wiring for A/C : Power point Wiring - Supply ,

fixing & laying Power point concealed with 1100V grade single

core 2X6 Sq.mm +1X4Sq.mm unsheathed stranded FRLS

Copper Conductor in 20 mm dia PVC conduit partly laid over

false ceiling and partly concealed in brick wall/floor including

making good damages . The rate should include supply and

laying of all materials like PVC conduit Pipe inspection boxes

etc. and any other materials to complete the wiring, making

connection from DB and to power unit & testing , etc. painting

and mending good to damages.

30 RM


18. Supply and fixing of power unit for A/C as per catalog

no.ACPU6M FT 20 Amps of North-West or Havells complete with

starter, MCB,Plug,Socket etc. to be fixed on modular type MS

Box embedded including necessary accessories. Make : North

West.

7 Nos

k


19. Lighting & fan (Material & Labour) :

19a. CFL lights Fittings & lamps, Ballast etc for recessed mounting:

Providing & Fixing 2xPL-L 36W recessed mounting

Luminaire with mirror optics designed Gypsum type ceiling

including S & F of 2 x PL – L 36 W CFL lamps, etc. 21 No

19b. Providing and fixing Havells make round shaped recessed

mounting luminaire with mirror optics designed for 2 x PL-C

18W including S & F of 2 nos. 2 x 18W PL-C lamps and other

accessories.etc.

29 No

19c. Tube lights Fittings & lamps, Ballast etc for surface mounting

Providing & Fixing surface mounting Luminaire designed for

tube lights or equivalent including S & F of ballast ,1x36W tube

lights, down rods etc

11 No

19d. Wall / Pedestal Fan Oscillating : Providing & Fixing of Wall /

Pedestal fan 400 mm sweep complete with regulator, etc.,

including interconnecting wiring. 13 No

19e. Exhaust Fan : Providing & Fixing 1400 RPM Exhaust Fan

Heavy Duty 300mm dia complete with mounting ring, louver,

covers, etc including interconnection wiring, making hole on wall

and making good the damages .

4 Nos.

19f. Ceiling Fan Oscillating : Providing & Fixing of Ciling fan 400

mm sweep complete with regulator, etc., including

interconnecting wiring.

2 No

19g. Call bell : Providing & Fixing call bell/buzzer on suitable board

on wall. 1 No

COMPUTER

20. Wiring from DB to UPS & from UPS to UPS DB :

Providing & laying of 2 x 6+1 x 4 sqmm 1100V grade PVC

insulated copper wire, FRLS, (Make- Finolex/Havells) in

concealed 25mm dia PVC conduit (ISI Mark) with all

accessories like saddles, hooks, bends, inspection boxes etc

including supply & fixing of PVC conduit over false ceiling / in

slab / beam / ceiling / on wall from DB to UPS & from UPS to

UPS DB.

35 RM

k


21. Industrial Type Plug & Socket for UPS output :

Providing & Fixing on wall in concealed 16 SWG MS box with

wall matching hylam cover 1no 32 A 3 pin Industrial Socket

with matching plug top3 pin neutral & earth type and 1no 32A DP

MCB make including necessary interconnection.

4 No

22. UPS PANEL WITH CHANGE-OVER-SWITCH :

Providing & Fixing of concealed 16 SWG MS sheet metal

enclosure of suitable size consisting of 2 nos 32A change-over-

switch, including necessary interconnections. 1 No

23. UPS DB : Supply & Fixing of UPS MCBSPN Distribution Board

in 16SWG sheet steel enclosure, with double door, internally

wired, neutral end earth busbar, and each comprising of

following MCBs having short circuit level 10KA. Each MCB

Distribution board shall comprise of following and including blank

plates, inscription marking, phase neutral and earth bars,

mounted on M.S. Frame on wall including cutting wall and

mending good damages Incoming 1 No. 32A SPN MCB. 1 no

DP 40A RCCB of 300ma sensitivity .(make-

Alstom/Siemens/MDS/Havells)

Outgoing 6 Nos. 10A/16A SP MCB

1 No

24. Wiring from UPSDB to WORK STATION : Providing & laying

of 2x4+1x2.5sqmm 1100V grade PVC insulated copper wire,

FRLS, (Make- Finolex/Havells) in concealed 20mm dia PVC

conduit (ISI Mark) with all accessories like saddles, hooks,

bends, inspection boxes etc including supply & fixing of PVC

conduit over false ceiling/in slab/beam/ceiling/on wall/in

floor/wooden partition/furniture from UPS DB to work station.

160 RM


25. Work Station : Supply & installation of Work station comprising

1 no 16A MODULAR switch, 3 nos 6A 5 pin MODULAR socket

outlet for UPS circuit on MODULAR switch board flush mounted

on wall/wooden panel/furniture. 22 Set

26. Supply & laying of 2 pair telephone cable througrout / 19mm

conduct pipe 60 RM

27. Supply & fixing telephone socket outlet RJ 11 type make MK8 Nos

k


28. Supply & laying of 2 core 23 / 35 speaker wire through 19mm

PVC pipe 50 RM

29. Supply & fixing of 20 watts ceilling speaker transformer 6 Nos

30. Supply & instalation of DVD player model no 3026 Philips or

equivalent that of Sony/Samsung.1

31. Supply & instalation of amplifier make Ahuja model no SSB 601

32 Providing support for temporary electrical connection of lights,

UPS Points, Power Points etc. and during shifting of UPS and

Server Room1 Job

33 Buyback of existing wiring, switchboards, DB, Electric fans,

Light fittings, Panel 1 Job

TOTAL Rs.

k


Section A : Civil & Furnishing Work

Section B : Sanitary & Plumbing Work

Section C : Electrical Work

TOTAL Rs.

ABSTRACT OF ESTIMATE FOR CIVIL, FURNISHING , SANITARY PLUMBING, ELECTRICAL FOR KHARAGPUR BRANCH

OF BANK OF BARODA

Project Cost (Rs.)

bank of · pdf filelist of works completed in the last ... part 'a' will be opened...

Documents