basic ueh exception
TRANSCRIPT
Title
Doc. Nr.
Revision
Date 4/8/2010
Abstract
Revision History
PA1 ETCHLUO
Open Issues
References Ref[1] UEH Exception for NTC Purpose_PA3
Ref[2] UEH_EXCEPTION Introduction
A UEH Exception Decriptions for Troubleshooting in Live Network
PA1
This workbook contains the description of UEH_EXCEPTION Codes for troubleshooting purpose in the
live network. It opens a way to investigate the root cause of the problem in depth step by step.
C:\elxmm\2009Feb21\ueh_
First draft
A UEH Exception Decriptions for Troubleshooting in Live Network
PA1
This workbook contains the description of UEH_EXCEPTION Codes for troubleshooting purpose in the
live network. It opens a way to investigate the root cause of the problem in depth step by step.
C:\elxmm\2009Feb21\ueh_
C:\elxmm\2009Feb21\ueh_
Codes rbId
171 -
529 -
223 -
521 -
54 2
222 -
141 -
552 -
220 -
221 -
12 -
200 -
500 -
533 -
142 -
327 -
318 -
54 -
276 -
545 -
409 -
201 -
351 -
311 -
523 -
407 -
54 3
225 -
800 -
563 -
80 -
54 16
350 -
331 -
283 -
940 -
607 -
509 -
6 -
310 -
110 -
400 -
554 -
501 -
557 -
352 -
921 -
757 -
120 -
140 -
504 -
850 -
711 -
359 -
210 -
54 4
512 -
365 -
10 -
122 -
601 3
660 -
312 -
281 -
404 -
650 -
405 -
11 -
57 -
451 -
180/181/182/183/184 -
310/311/312/327 -
54 -
521/523/552 -
58 -
800 -
54 -
181 -
350/351 -
220/221/222 -
171 -
529 -
EC_String
Received signal admissionRej on rnhIfCellControlP
TIMER inactivityDchTimerId has expired
Received signal decreaseResourceReq on RnhIfCellEventP
TIMER rrcSetuptimerId has expired
Received signal spProcessingFailure on DcsIfEventP
Received signal cellLockedInd on RnhIfCellEventP
Received signal ranapDisconnectInd on UehRanapProcP
TIMER T_CH_SWITCH_1 has expired (DCH<->FACH)
Received signal eulLockedInd on RnhIfCellEventP
Received signal hsDschLockedInd on RnhIfCellEventP
Received signal faultyTrBrInd on DrhIfTrBrP
Received signal cellParamsRC2CharRej on RnhIfCellInfoP
TIMER T_RABEST_1 has expired waiting for RRC Radio Bearer Setup Response
TIMER rcsHsRlLostTimerId has expired
Received signal ranapInitialUeRej on UehRanapProcP
Received signal NBAP RADIO LINK FAILURE INDICATION
Received signal NBAP COMMON MEASUREMENT INITIATION FAILURE
Received signal spProcessingFailure on DcsIfEventP
Security Check failed for Cell or Ura update message
TIMER esvRrcTimerId has expired
Received signal RRC Physical Channel Reconfiguration Failure
Received signal cellParamsRej on RnhIfCellInfoP
Received signal RNSAP RADIO LINK ADDITION FAILURE
Received signal NBAP RADIO LINK ADDITION FAILURE
TIMER timer_RRC_ASU has expired
Received signal RRC CellUpdate with Failure Cause
Received signal spProcessingFailure on DcsIfEventP
Received signal capabilityChangeInd on RnhIfCellEventP
LOGICAL ERROR IN RANAP RAB ASSIGNMENT REQUEST
TIMER rcsAllRlLostTimerId has expired
Received signal rrcConnRejectInd on RnhIfRrcP
Received signal spProcessingFailure on DcsIfEventP
Received signal RNSAP RADIO LINK SETUP FAILURE
Received an NBAP Message Reject
Failed to build Ranap Relocation Required
INTERNAL STATE INCOMPATIBLE WITH REQUESTED OPERATION
Internal Subsystem Communication barred (Uu)
TIMER tcpmPcr has expired
Received signal connNotOk on DrhIfDcRhDcP
Received signal NBAP RADIO LINK SETUP FAILURE
Received signal messageReject on UehNbapDedicatedP
Received signal RRC Radio Bearer Setup Failure
TIMER T_CH_SWITCH_3 has expired (DCH->DCH)
TIMER T_RABEST_1 has expired waiting for RRC Radio Bearer Reconfiguration Complete
TIMER UehRrcCellChangeHsTimer
Received signal RNSAP RADIO LINK RECONFIGURATION FAILURE
UNEXPECTED UL RRC DCCH MESSAGE TYPE
LOGICAL ERROR IN RRC RADIO BEARER RECONF COMPLETE
Received signal messageReject on UehRnsapDedicatedSrncP
Received signal messageReject on UehRanapProcP
TIMER T_RABREL_1 has expired waiting for RRC Radio Bearer Release Response
LOGICAL ERROR FAILED TO DECODE RRC MESSAGE
LOGICAL ERROR IN RNSAP RADIO LINK READY IND
Received signal RNSAP RADIO LINK FAILURE INDICATION
Received signal asynch_forcedReleaseInd on UehUeCtxtAsynchIndicP
Received signal spProcessingFailure on DcsIfEventP
TIMER cellChangeTimerId has expired
Received a RNSAP Message Reject
Received signal setupLocalIpUdpTrBrRej on DrhIfTrBrP
Received signal sccpConnectionDisconnectionInd on UehRnsapDedicatedSrncP
Internal Subsystem Communication barred (UEH)
LOGICAL ERROR IN NBAP RL FAILURE IND
Received signal NBAP RADIO LINK RECONFIGURATION FAILURE
Unhandled GPEH Service Class in call to incrementGpehCounter
Received signal RRC Measurement Control Failure
LOGICAL ERROR IN NBAP RADIO LINK SETUP RESPONSE
Received signal RRC Radio Bearer Reconfiguration Failure
Received signal setupTrBrRej on DrhIfTrBrP
Received signal interRATHandoverExInd on DcsIfEventP with invalid targetId
Received signal RANAP Relocation Preparation Failure
Causes Impact
Admisson rejected due to following limitation: 1
Congestion
2 AseUl - Admission limit for UL ASE exceeded
3 AseDl - Admission limit for DL ASE exceeded
4 DlPwr
5 DlCode
6 SF8
7 SF16
8 SF32
9 CompModeLimit
10 CellDeactivated
11 RoutingFailure
12 LoadSharing
13 UniSaalCongestion
14 RbsUlHwResources
15 RbsDlHwResources
16 PhysHsChanLimit
17 SF4UL
18 SF8UL
19 SF16UL
20 SF8gUL
21 SF16g
22 EdchLimitServingCell
23 EdchLimitNonServingCell,
24 SctpCongestion
Performance degrade
The inactivityDchTimer defines the maximum time of inactivity on the
DCH allowed after the establishment of a RRC connection in
CELL_DCH. It is restarted at the reception of the following messages:
Downlink Direct Transfer
Uplink Direct Transfer
Initial Direct Transfer After timeout, releasing the
signaling connection is a normal behaviour for an UE in state
CELL_DCH with Stand-alone SRB only to save system resources.
No impact
Congestion Control in RNC requested to decrease the resources usage
on the existing connections of cell in congestion to admit a new
connection or service with higher QoS priority by pre-emption or
channel switching, system resources released.
Call drop
Timeout waiting neither RRC Connection Setup Complete or NBAP
Radio Link Restore Indication, caused by coverage or RF
environmental related issues, like power, interference, shadowing,
and so on...
Performance degrade
RLC data transport failure on SRB2, caused by coverage or RF
environmental related issues, like power, interference, shadowing,
and so on...
Call drop
Locking cell caused many affected UeContexts release. Call drop
The SRNC might receive an unexpected SCCP release indication for an
established Iu connection. This could be initiated by either of the
following:
a) A SCCP RLSD message sent from the CN is received by the SRNC.
b) A local detection in SRNC on that the SCCP connection is lost. After
reception of the SCCP release indication for one CN if the UE had
signalling connections towards two CNs, all resources associated
with the CN for which the SCCP release indication comes is released.
The signalling connection towards the other CN remains.
Call drop
Timeout waiting RRC Radio Bear Reconfiguration Complete for
ChannelSwitching in between Cell_DCH and Cell_FACH, caused by
coverage or RF environmental related issues, like power, interference,
shadowing, and so on...
Call drop
Locking Eul channel caused many affected UeContexts release.Call drop
Locking hsDsch channel caused many affected UeContexts release.Call drop
Call drop
Resource calculation(Mapping parameters) for Radio Connection was
not passed for a new RRC connection establishment or radio link
setup, caused by capability limitation of the cell in current snapshot.Performance degrade
Call drop
For a connection that includes HSDPA, the PS part of the connection is
considered lost by the RCS when the RLS that contains the Serving HS-
DSCH cell, has been out-of-sync for a time given by the parameter
hsDschRcLostT. This means that when the hsDschRcLostT timer
expires, an Iu Release will be requested to the PS CN and when the
dchRcLostT timer expires, an Iu Release will be requested to all
involved CNs. It caused by coverage or RF environmental related
issues, like power, interference, shadowing, and so on...
Call drop
Case 1: Establishing a signaling connection to CN but the Ue reference
has already have an iuSigConnId, the ranapInitialUeMessage was
rejected, but sent over RANAP Direct Transfer to CN instead.
Case 2: In other case could be RANAP failure causing the
commuication to CN lost completely.
Depends
See NBAP REJECT CAUSE Depends
See NBAP REJECT CAUSE Performance degrade
RLC data transport failure on RB, caused by coverage or RF
environmental related issues, like power, interference, shadowing,
and so on...
Call drop
Security algorithm syncing failure in state CellUpdate or UraUpdate,
see details on following ErrorCode 545Call drop
Timeout waiting for RRC Security Mode Complete, caused by
RLC_RESET PDU received at pending RX activation of Ciphering
configuration in SecurityControl, UL message(SecurityMode Command
Complete) in SRB was discared. It's often a clash between different
RNC and/or CN procedures.
Call drop
1 Configuration Unsupported
2 Physical Channel Failure
3 Incompatible Simultaneous Reconfiguration
4 Compressed mode runtime error
5 Protocol Error
6 Cell Update Occurred
7 Invalid Configuration
8 Configuration Incomplete
9 Unsupported Measurement
10 MBMS Session Already Received Correctly
11 Lower Priority MBMS Service
12 Spare5
13 Spare4
14 Spare3
15 Spare2
16 Spare1
In the case of ChannelSwitching from Cell_FACH to Cell_DCH, it often
the UE failed to establish the physical channel(s) indicated in the
received CELL UPDATE CONFIRM message. When a physical dedicated
channel establishment is initiated by the UE, the UE shall start a timer
T312 and wait for layer 1 to indicate N312 "in sync" indications. On
receiving N312 "in sync" indications, the physical channel is
considered established and the timer T312 is stopped and reset. If the
timer T312 expires before the physical channel is established, the UE
shall consider this as a "physical channel failure". In such a situation,
coverage or RF environmental issues are always the contributor.
Performance degrade
Cell specific info is fetched from TopCell (doff, measurementId,
nodePhasediff, nodePhaseDiffAcc, primaryCPICHPower,
ulInterference, lac, rac, sac, individualoffset).Call drop, or Performance
degrade, depends
IUB FrameSynch DL: TimingAdj CtrlFrame received with ToA > ToAE,
i.e. "crazy off"Performance degrade
Processing hardware unavailable in RBS was received. Performance degrade
Timeout waiting for RRC Active Set Update Complete, caused by
coverage or RF environmental related issues, like power, interference,
shadowing, and so on...
Call drop
1 Configuration Unsupported
2 Physical Channel Failure
3 Incompatible Simultaneous Reconfiguration
4 Compressed mode runtime error
5 Protocol Error
6 Cell Update Occurred
7 Invalid Configuration
8 Configuration Incomplete
9 Unsupported Measurement
10 MBMS Session Already Received Correctly
11 Lower Priority MBMS Service
12 Spare5
13 Spare4
14 Spare3
15 Spare2
16 Spare1
Call drop
RLC data transport failure on SRB3,caused by coverage related issues
like out of coverage, poor coverage, or environmental related issues
like interference, shadowing
Call drop
IE in RANAP RAB ASSIGNMENT REQUEST was not supportedPerformance degrade
Radio Connection Supervision function was timeout, all Radio links
lost, caused by coverage related issues like out of coverage, poor
coverage, or environmental related issues like interference,
shadowing
Call drop
RLC data transport failure for RB16(PS Interactive),caused by coverage
or RF environmental related issues, like power, interference,
shadowing, and so on...
Call drop
See NBAP REJECT CAUSE Performance degrade
1 Encode failed
2 Timeout
3 Transaction removed
Call drop
Performance degrade
CN Hard Handover for PS rab + CS signalling connection was not
supported
Connection to Ue lost, RRC communication failure Performance degrade
Call drop
A Cell program restarted causing internal communication broken to
DcRh.Performance degrade
See NBAP REJECT CAUSE
1 Encode failed
2 Timeout
3 Transaction removed
Case 1: If the Ue roams to a different cell during the Radio Bearer
Setup Procedure the Radio Bearer Setup attempt will fail because the
UE will not be able to
switch to DCH in the original cell while handling a Cell Update to the
new cell. The Ue will send a Radio Bearer Failure in this situation on
the CCH in the
new cell. (The Radio Bearer Setup Failure transaction Id will be
different to the Radio Bearer Setup Transaction Id). The Failure can
thus be ignored and
the use case continues normally (The Cell Update (new cell) is handled
and the RAB Establishment continues from the propagation delay
request. In the case where it is a Cell Update Same Cell,).
Case 2: If the RADIO BEARER SETUP FAILURE is received on the CCH of
the same cell (The transaction Ids are the same), it indicates that the
RAB Establishment has failed in that cell. In this situation, the
resources (dedicated and common) seized for the connection are
released as described in the T_RABEST_1 timeout case.
Call drop
Call drop
Timeout waiting for RRC Radio Bearer Reconfiguration Complete,
caused by coverage or RF environmental related issues, like power,
interference, shadowing, and so on…
Timeout waiting for RRC Cell Change Complete, caused by coverage or
RF environmental related issues, like power, interference, shadowing,
and so on…
Call drop
The RRC message received was not the one expected, Ue was not in
sync with RNCPerformance degrade
Uplink Counter Synchronisation IE not present in RRC RADIO BEARER
RECONF COMPLETE messageCall drop
1 Encode failed
2 Timeout
3 Transaction removed
1 Encode failed
2 Timeout
3 Transaction removed
Timeout waiting RRC Radio Bearer Release Response, caused by
coverage or RF environmental related issues, like power, interference,
shadowing, and so on…
Call drop
InvalidConfiguration in RRC MESSAGE or error decoding UL DCCH
messagePerformance degrade
Call drop
See NBAP REJECT CAUSE Call drop
The function is initiated by RANAP unavailable (a Core Networks is
down), a cell unavailable, cell program restart, PDR SP unavailable,
Cello unavailable,congestion, Pool congestion or RNSAP unavailable.
Call drop
RLC data transport failure on SRB4, caused by coverage or RF
environmental related issues, like power, interference, shadowing,
and so on…
Call drop
Timeout waiting for RRC Cell Change, caused by coverage or RF
environmental related issues, like power, interference, shadowing,
and so on…
1 Encode failed
2 Timeout
3 Transaction removed
Call drop
400 drhTrBr_failedUnspecified
401 drhTrBr_rncModuleDown
402 drhTrBr_trBrNotFound
403 "drhTrBr_failedToInsertTrBr"
404 drhTrBr_cppNciRestartOnMp
405 drhTrBr_cppNciNetConnRej
406 drhTrBr_cppNciNodeConnRej
407 drhTrBr_cppNciDiscInd
408 drhTrBr_cepNotFound
409 drhTrBr_failedToInsertCep
410 drhTrBr_eriServerNotReadyForCepComm
411 drhTrBr_cppEriCepReject
412 drhTrBr_cppEriRestartOnMp
413 drhTrBr_auditOngoing
414 drhTrBr_spRestart
415 drhTrBr_ipHostNotFound
416 drhTrBr_failedToInsertIpTp
417 drhTrBr_cppSciSessionSetupRej
418 drhTrBr_ipTpNotFound
419 drhTrBr_cppSciSessionModifyRej
420 drhTrBr_auditInconsistency
421 drhTrBr_cppSciTrafficIndSessionReleased
422 drhTrBr_ipSessionReleased
It's often caused by the underlying TNL resource unavailable
temporarily.
Call drop
The SRNC might receive an unexpected SCCP release indication for an
established Iu connection. This could be initiated by either of the
following:
a) A SCCP RLSD message sent from the CN is received by the SRNC.
b) A local detection in SRNC on that the SCCP connection is lost. After
reception of the SCCP release indication for one CN if the UE had
signalling connections towards two CNs, all resources associated
with the CN for which the SCCP release indication comes is released.
The signalling connection towards the other CN remains.
Depends
The communication in between UEH and DCS was broken, caused by
the release of SRB due to spProcessing failure.Call drop
Logical error in IE RL_InformationResponseList_RL_SetupRspFDD_PDU
1 Configuration Unsupported
2 Physical Channel Failure
3 Incompatible Simultaneous Reconfiguration
4 Compressed mode runtime error
5 Protocol Error
6 Cell Update Occurred
7 Invalid Configuration
8 Configuration Incomplete
9 Unsupported Measurement
10 MBMS Session Already Received Correctly
11 Lower Priority MBMS Service
12 Spare5
13 Spare4
14 Spare3
15 Spare2
16 Spare1
Setting up AAL2 connection got remote reject due to resource
temporary failure.Call drop
GSM Cell target Id could not be mapped to a GSM cell reference in
UehUeCtxt data, wrong data in GSM relation.Performance degrade
CN or BSC failed to prepare the resources for IRATHO Performance degrade
See Ref[1]
See Ref[1]
See Ref[1] and Ref[2]
See Ref[1]
See Ref[1] and Ref[2]
See Ref[1] and Ref[2]
See Ref[1] and Ref[2]
See Ref[1]
See Ref[1]
See Ref[1] and Ref[2]
See Ref[2]
See Ref[2]
Trace Object
uehUeCtxtC* 1,3,6,7,enter,return
uehUeCtxtC* 1,3,7,enter,return
uehUeCtxtC* 6,7,enter,return RANAP_ASN
bus_send, bus_receive
uehUeCtxtC* 1,3,6,7,enter,return
UE_TRBR_HANDL 3
UE_GENERAL 3
RRC_ASN bus_send, bus_receive
RANAP_ASN bus_send, bus_receive
CON_HANDL 1,6,7
NBAP_ASN bus_send, bus_receive
DRIFT_DED 6,7
RRC_ASN bus_send, bus_receive
uehUeCtxtC* 1,3, enter, return
CHAN_SWITCH 6,7
CELL_UPDATE 5,6,7
DRIFT_DED 6,7
IRAT_HANDOVER 6,7
RAB_EST 6,7
RAB_REL 3,5,6,7
CON_HANDL 6,7
NBAP_ASN bus_send, bus_receive
RNSAP_ASN bus_send, bus_receive
CON_HANDL 6,7
HANDOVER 1,3,6,7,state_change,enter,return
NBAP_ASN bus_send, bus_receive
RNSAP_ASN bus_send, bus_receive
CON_HANDL 6,7
HANDOVER 1,3,6,7,state_change,enter,return
RRC_ASN bus_send, bus_receive
HANDOVER 6,7
RRC_ASN bus_send, bus_receive
CELL_UPDATE 6,7
GENRAB_EVAL 1,3
GRC_SERV 1,3
RANAP_ASN bus_send, bus_receive
CN_HARD_HANDOVER 6,7
IRAT_HANDOVER 1,6,7
RRC_ASN bus_send, bus_receive
COMPRESSED_MODE 2,6,7
HS_CELL_CHANGE 6,7
POWER_CTRL 6,7
IF_HANDOVER 2,3,6,7
HANDOVER 6,7
RRC_ASN bus_send, bus_receive
IRAT_HANDOVER 2,6,7
RAB_EST 3,6,7
UE_TRBR_HANDL 6,7
Radio Network Layer Cause
0 Unkown C-ID,
1 Cell not available,
2 Power level not supported,
3 DL radio resources not available,
4 UL radio resources not available,
5 RL Already Activated/allocated,
6 Node B Resources Unavailable,
7 Measurement not supported for the object,
8 Combining Resources not available,
9 Requested configuration not supported,
10 Synchronization failure,
11 Priority transport channel established,
12 SIB Origination in Node B not Supported,
13 Requested Tx Diversity Mode not supported,
14 Unspecified,
15 BCCH scheduling error,
16 Measurement Temporarily not Available,
17 Invalid CM Setting,
18 Reconfiguration CFN not elapsed,
19 Number of DL codes not supported,
20 S-CPICH not supported,
21 Combining not supported,
22 UL SF not supported,
23 DL SF not supported,
24 Common Transport Channel Type not supported,
25 Dedicated Transport Channel Type not supported,
26 Downlink Shared Channel Type not supported,
27 Uplink Shared Channel Type not supported,
28 CM not supported,
29 Tx diversity no longer supported,
30 Unknown Local Cell ID,
31 Number of UL codes not supported,
32 Information temporarily not available,
33 Information Provision not supported for the object,
34 Cell Synchronisation not supported,
35 Cell Synchronisation Adjustment not supported,
36 DPC Mode Change not Supported,
37 IPDL already activated,
38 IPDL not supported,
39 IPDL parameters not available,
40 Frequency Acquisition not supported,
41 Power Balancing status not compatible,
42 Requested type of Bearer Rearrangement not supported,
43 Signalling Bearer Rearrangement not supported,
44 Bearer Re-arrangement needed,
45 Delayed Activation not Supported,
46 RL Timing Adjustment not supported,
47 MICH not supported,
48 F-DPCH Not Supported
Transport Layer Cause
Transport resource unavailable,
Unspecified,
Protocol Cause
Transfer syntax error,
Abstract syntax error (reject),
Abstract syntax error (ignore and notify),
Message not compatible with receiver state,
Semantic error,
Unspecified,
Abstract syntax error (falsely constructed message),
Miscellaneous Cause
Control processing overload
Hardware failure,
O&M intervention,
Not enough user plane processing resources,
Unspecified,