batterie management system (bms) battery ... - sek.kit.edu · batterie management system (bms)...

1
Batterie Management System (BMS) Battery Management System (BMS) INSTITUT FÜR PROZESSDATENVERARBEITUNG UND ELEKTRONIK (IPE) INSTITUTE FOR DATA PROCESSING AND ELECTRONICS (IPE) Das BMS ist ein eigenständiges Steu- ergerät, das die Überwachung und Sicherheit eines Batteriesystems ge- währleistet. Aufgaben des BMS An/Abschalten der Batterie Zellschutz vor Über/Unterspannung Temperaturüberwachung der Batterie Ladungsausgleich durch „Zell-Balancing“ Schätzung des SOC und SOH Leistungshalbleiter Cu-AVT Eine neue Aufbau- und Verbindungs- technik basierend auf Kupfer-Draht- bondtechnik und Silber-Sintertechnik ist der Schlüssel zu zuverlässigeren und leistungsfähigeren Leistungsmodulen. Gefördert vom BMBF, Projekt: ProPower KIT – University of the State of Baden-Wuerttemberg and National Research Center of the Helmholtz Association www.kit.edu The BMS is a self-standing control unit ensuring function and general safety of an electric vehicle battery. Principal tasks of the BMS Connect or disconnect the battery Cell protection against over/under- voltage Temperature control of the battery Balancing of the cells’ charge Estimation of SOC and SOH Power Module in Copper Technology A novel packaging and interconnect technology based on copper wire bonds and silver-sinter die bonding is the key to more reliable and powerful future power modules. Funded by BMBF, project: ProPower

Upload: others

Post on 25-Oct-2019

12 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Batterie Management System (BMS) Battery ... - sek.kit.edu · Batterie Management System (BMS) Battery Management System (BMS) INSTITUT FÜR PROZESSDATENVERARBEITUNG UND ELEKTRONIK

Batterie Management System (BMS)Battery Management System (BMS)

INSTITUT FÜR PROZESSDATENVERARBEITUNG UND ELEKTRONIK (IPE)INSTITUTE FOR DATA PROCESSING AND ELECTRONICS (IPE)

Das BMS ist ein eigenständiges Steu-ergerät, das die Überwachung und Sicherheit eines Batteriesystems ge-währleistet.

Aufgaben des BMS � An/Abschalten der Batterie � Zellschutz vor Über/Unterspannung � Temperaturüberwachung der

Batterie � Ladungsausgleich durch

„Zell-Balancing“ � Schätzung des SOC und SOH

Leistungshalbleiter Cu-AVTEine neue Aufbau- und Verbindungs-technik basierend auf Kupfer-Draht-bondtechnik und Silber-Sintertechnik ist der Schlüssel zu zuverlässigeren und leistungsfähigeren Leistungsmodulen.

Gefördert vom BMBF, Projekt: ProPower

KIT – University of the State of Baden-Wuerttemberg andNational Research Center of the Helmholtz Association www.kit.edu

The BMS is a self-standing control unit ensuring function and general safety of an electric vehicle battery.

Principal tasks of the BMS � Connect or disconnect the battery � Cell protection against over/under-

voltage � Temperature control of the battery � Balancing of the cells’ charge � Estimation of SOC and SOH

Power Module in Copper TechnologyA novel packaging and interconnect technology based on copper wire bonds and silver-sinter die bonding is the key to more reliable and powerful future power modules.

Funded by BMBF, project: ProPower