battery & electrical · 2017-07-18 · battery & electrical jtc auto tools 678 – 876 –...
TRANSCRIPT
BATTERY & ELECTRICAL
JTC AUTO TOOLS 678 – 876 – 3470
2600 Northlake Dr. Suite F,
Suwannee, GA, 30024
JTC-1039 BATTERY TESTER
Avoids dead battery and helps
extend battery life.
Test battery life by hot or cold, and
detects overcharge.
Applicable: 12 and 24 volt systems.
JTC-1040 ANTI–FREEZE TESTER
Avoid winter freeze up and
summer boil-over.
Test all permanent (Ethylene
Glycol) solution with radiator hot
or cold.
Two scales show freezing point of
radiator solution and boiling point
of summer coolant.
JTC-1041 BATTERY HYDROMETER
Test battery in seconds.
Color – coded float for easy
reading.
BATTERY & ELECTRICAL
JTC AUTO TOOLS 678 – 876 – 3470
2600 Northlake Dr. Suite F,
Suwannee, GA, 30024
JTC-1043 DELUXE BATTERY FILLER
Large suction designed to suck easily and quickly.
For battery fuller or any other liquid.
JTC-1105 R-134a MANIFOLD
Enclosed the 1107 adjustable coupler.
R-137a sight glass manifold with
three 60"color-coded hoses.
High pressure: 0 ~ 500psi (0 ~ 35kg / c㎡)
Low pressure: 0 ~ 350psi (-1 ~ 24.5kg / c㎡)
Vacuum: 0 ~ 76 in / Hg
JTC-1107 ADJUSTABLE QUICK COUPLER SET
Enclosed the high side and low side
coupler
The valve core puller is adjustable to
fit the different valve core.
BATTERY & ELECTRICAL
JTC AUTO TOOLS 678 – 876 – 3470
2600 Northlake Dr. Suite F,
Suwannee, GA, 30024
JTC-1137 QUICK COUPLER SET
Enclosed the high side and low side coupler.
Straight design suitable for confined space.
JTC-1138 VALVE CORE REMOVER (R-12 / R134a)
Designed for removing valve coves in
air condition system.
Spec: R-12 / R-134a
JTC-1139 VALVE CORE REMOVER
(R-134a / R-134a EXTENDED)
Designed for removing valve coves in
air condition system.
Spec: R-134a / R-134a Extend
BATTERY & ELECTRICAL
JTC AUTO TOOLS 678 – 876 – 3470
2600 Northlake Dr. Suite F,
Suwannee, GA, 30024
JTC-1153 WINDOW HOLDER
Special design with scale to inject the dye and pack oil for R134a and R12 system.
Capacity: 1/4 oz. (7.5ml) to 2 oz. (60ml)
JTC-1242 SPARK PLUG WIRE PLIERS
Length: 200mml
Small design is good to use in a narrow
space.
In order to fit the angle of the electric
wire, the head of the remover uses a
special curve design, the special design
on the head of the remover is holding
the electric wire tightly.
JTC-1248 ELECTRIC CIRCUIT TESTER
Voltage: 6 - 24dcv
Wire length: 4.5mt
8A safety gear inside. The automatic power
failure will start when voltage is over the
limit.
This tool can test the positive and negative
voltage.
Tests continuity in switches, relays, diodes &
fuses, and wiring harnesses.
Polarity test cables and sockets.
Find short circuits and bad earths fast.
BATTERY & ELECTRICAL
JTC AUTO TOOLS 678 – 876 – 3470
2600 Northlake Dr. Suite F,
Suwannee, GA, 30024
JTC-1249 CORDLESS CIRCUIT TESTER
Sharp probe tip covered with brass
protection cap, and checks function of car
lights faster & easier.
Check range: 6 – 12, 24v.
JTC-1260 A/C SPRING LOCK COUPLING TOOLS
Special design for removing the spring
lock coupling in A/C system.
Two tools in a set for the different size of
coupling.
Applicable: Toyota after 2000
JTC-1261 METAL CASE BATTERY BRUSH
Designed for cleaning the battery
terminals.
Can use on both sides.
BATTERY & ELECTRICAL
JTC AUTO TOOLS 678 – 876 – 3470
2600 Northlake Dr. Suite F,
Suwannee, GA, 30024
JTC-1301 RADIO REMOVAL TOOL KIT
Applicable: BENZ, BMW, VW, AUDI, FORD, and American cars.
JTC-1354 FIN STRAIGHTENING TOOL
Made of stainless steel.
Special design to clean & straighten the
evaporator fin.
JTC-1358 DISCONNECTION TOOL SET
All the disconnect tools you need to work
with spring locking coupling, fuel line,
and transmission cooler line.
Contents:
o Spring locking tool:
3/8" (red), 1/2" (blue), 5/8"
(black), 3/4" (white)
o Fuel line disconnect tool:
3/8" (yellow), 1/2" (green)
o Fuel line fitting disconnect tool:
5/16" (gray), 3/8" (cyan)
o FORD / GM quick disconnect tool: 1/2" (black)
BATTERY & ELECTRICAL
JTC AUTO TOOLS 678 – 876 – 3470
2600 Northlake Dr. Suite F,
Suwannee, GA, 30024
JTC-1438 MULTI-PURPOSE CONNECTER SET
Various connectors.
It is a perfect circuit checking tool.
You can use it to adjust and check the
problem of car rapidly and accurately.
Contents:
o 5KΩ Potentiometer (Variable Resister) x 2
o Various automotive flat terminals x 48
o Various automotive circular terminals x 24
o 1 to 2 connector x 2
o 1 to 1 connector x 4
o LED Stroboscope x 2
o Acicular Probe x 4
o Probe x 2
o Alligator clip x 2
o SRS connector x 2
JTC-1507 COIN TYPE SPARK PLUG GAUGE
Testing range: 0.6 ~ 2.4 mm (0.020 ~ 0.100 IN)
JTC-1529 TERMINAL TOOL SET
Contains 12-pieces which specifications
are various.
Use for installing and removing the
terminal by most cars.
BATTERY & ELECTRICAL
JTC AUTO TOOLS 678 – 876 – 3470
2600 Northlake Dr. Suite F,
Suwannee, GA, 30024
JTC-1609 A/C COMPRESSOR CLUTCH REMOVER KIT
Replace clutches found on FS6, C171, 6P &
148 computer.
GM R4 & R6, HR-6, DA-6 & V5 A/C
compressors.
Compressors of Sanden SD505, 507, 508,
510, 575, 708 and 709.
2 & 3 hole puller plate fits most clutches, the
mechanical force does the pulling job.
JTC-1633 SPARK PLUG WIRE PLIERS
The spark plug wire pliers is specially
designed for removing hard to reach high
voltage lean wire.
Good insulated handle and the grooves
avoid any sliding down in operation,
Especially on Mercedes-Benz.
Length: 220mm
JTC-1704 ELERTRIC CIRCUIT TESTER
Power on type tests 6, 12, and 24 volt
circuits.
For wire breaks, short, fuses, lamps,
relays armatures, etc.
75mm inspection probe with point cover.
120cm long 16# wire with alligator clip.
BATTERY & ELECTRICAL
JTC AUTO TOOLS 678 – 876 – 3470
2600 Northlake Dr. Suite F,
Suwannee, GA, 30024
JTC-1827 A/C, FUEL LINE DISCONNECT TOOL SET
Easily disconnect air conditioning lines and
quickly connect fuel lines.
Size include: 1/4", 5/16", 3/8", 1/2", 5/8",
3/4", 7/8"
JTC-1834 A/C SPRING LOCK COUPLING TOOLS
Used on 1981 the current Ford cars and
pickups having spring lock connection on
the A/C system.
For 3/8", 1/2", 5/8" and 3/4" couplers.
JTC-3205 CRIMPING TOOL
Applicable: Use with the automotive terminals and open barrel terminals.
BATTERY & ELECTRICAL
JTC AUTO TOOLS 678 – 876 – 3470
2600 Northlake Dr. Suite F,
Suwannee, GA, 30024
JTC-4056 SPECIAL LIGHT BULB PLIERS
Special pliers for installing and removing
wedge base bulbs, e.g. bulb in blower
control switch on VW Passat 1996, seat
Leon bulb in ambient air switch on OPEL
Astra F, MERCEDES-BENZ and RENAULT
passenger cars.
Blades made of special steel with plastic
protective caps, pliers with solid plastic
body.
JTC-4081 20-PCS RADIO REMOVAL TOOL SET
Universal tool for installing and removing
radio on car.
Applicable: VW, AUDI, Mercedes Benz, Skoda, BMW, FORD.
JTC-4082 46-PCS RADIO REMOVAL TOOL SET
Universal tool for installing and removing
radio on car.
Applicable: BENZ, BMW, FIAT, OPEL, VW,
AUDI, FORD, SKODA, PORSCHE, and etc.
Applicable radio brand: KENWOOD, SONY, PIONEER, PANASONIC, CLARION, BLAUPUNKE, BECKER, and etc.
BATTERY & ELECTRICAL
JTC AUTO TOOLS 678 – 876 – 3470
2600 Northlake Dr. Suite F,
Suwannee, GA, 30024
JTC-4088 R-1234yf QUICK COUPLER SET
For the new system R-1234yf.
Enclosed the high side and low side
couplers.
The valve core puller is adjustable.
Special designed for high pressure system.
JTC-4137 12V / 24V SURGE PROTECTOR
Provides protection against electrical devices
from electrical surges and spikes generated by
welding units. This prevents the need to
disconnect batteries result in the loss of stereo
and other memories.
Product dimension: 50 x 30 x 110 mm.
Max. Input Voltage: DC 35V
Power Cord: red / black, 450mm(L), 10AWG
Suitable for DC 12V, DC24V lead-acid batteries.
Input Voltage: DC12V or DC24V
Peak forward Surge current: 200 amp at 8.3ms
Max. Surge Capability: 1500W at 1ms
JTC-4195 10-PCS A/C, FUEL LINE DISCONNECT TOOL SET
(ELBOW)
For separating quickly disconnect fittings on fuel
and cooler lines.
Unique offset design allows for access in confined
or obstructed areas.
Easy, one-handed operation.
Material: Plastic
Contents:
o JTC-4195-1 (Dark Grey) Size: 1/2"
o JTC-4195-2 (Blue) Size: 5/8"
o JTC-4195-3 (Black) Size: 3/4"
o JTC-4195-4 (Silver) Size: 7/8"
o JTC-4195-5 (Red) Size: 5/16"
o JTC-4195-6 (Gold) Size: 3/8"
o JTC-4195-9 (Jacinth) Size: 3/16"
o JTC-4195-8 (Purple) Size: 3/8"
o JTC-4195-9 (Orange) Size: 1/2"
o JTC-4195-10 (Light Green) Size: 1/2"
BATTERY & ELECTRICAL
JTC AUTO TOOLS 678 – 876 – 3470
2600 Northlake Dr. Suite F,
Suwannee, GA, 30024
JTC-4196 LED HEAVY DUTY ELECTRIC CIRCUIT TESTER
Dual color LED indicates red for power (high)
and green for ground (low).
Heavy-duty probe.
6' (1.8m) long heavy-duty 18 gauge dual
leads with battery clips and spring strain
relief.
High – impact plastic body.
High impedance tester protects computer
circuitry.
Services 6, 12, 24 Volt systems.
JTC-4237 LED CONNECTOR TESTING SET
Contents:
o 1 pc LED testing light
o 2 pcs testing probes red & black
The probe – made from stainless steel for
easier testing.
The LED shows yellow light when connecting with positive pole and shows red light for negative pole.
JTC – 4446:
JTC-4446 CURRENT LEAKING DETECT KIT
Check the current leaking without losing computer
memory.
Provide a safe and quick way to detect the leakage or
consumption of the electricity on the car.
Connect method:
o Use the test clamp to connect with the car
battery.
o Use the OBD2 test clamp to connect to the
backup battery.
o Disconnect the negative battery terminal
from the car battery to begin the test. (This
method can be a power supply when you
change the battery.)
Max load: DC32V / 20A
Measurement Range: 0.01A~19.99A
Contents: o TERMINAL CURRENT CLAMP x 1
o OBD2-CURRENT CLAMP x 1
o Current tester x 1 o Fuse x 2 o Puller of blade fuse x 1 o Puller of mini fuse x 1
BATTERY & ELECTRICAL
JTC AUTO TOOLS 678 – 876 – 3470
2600 Northlake Dr. Suite F,
Suwannee, GA, 30024
JTC-4499 REFRIGERANT MANIFOLD GAUGE WITH MAGNETIC
BELT
Patent magnetic belt designed can easily mount on
compatible surface or hook on non – magnetic
surface.
Window type integrated aluminum frame, provide
complete fit and easy operation.
Applicable for refrigerant R12, R22, R134A, and
R1234yf.
Gauge size: 80mm dimension with protective rubber
cover
o High Pressure: 0-500psi/ 0-35 kg/cm²
o Low pressure: 0-350psi/ 0-24 kg/cm²
o Vacuum: 0 ~ -30inHg/ 0 ~ -76 cm/Hg
Hose size: 60" length black hose, Red, Blue and Yellow
nuts at the front for discrimination. 600psi working
pressure & 3000psi burst pressure.
With a bearing at the bottom of the coupler, the hose
will not be released while shaking.
Optional couplers for different refrigerant.
JTC-4534 RELAY PLIERS
Use for removing the electrical relays on
most vehicles.
Specially designed handle and tips for
narrow space usage.
The tips of the pliers are angled to fit slots or the edge of relay cover.
JTC-4551 INFRARED THERMOMETER (ECONOMY)
Same function as JTC–1407
Applicable range: -20 ~ 320°C (-4 ~ 608°F)
BATTERY & ELECTRICAL
JTC AUTO TOOLS 678 – 876 – 3470
2600 Northlake Dr. Suite F,
Suwannee, GA, 30024
JTC-4565 DUAL ANGLE BRASS LINE BENDING PLIERS
Special dual purpose design, capable for
bending 3/16" and 1/4" OD tube.
By using this tool can prevent damage to the
tube, especially in narrow space.
Specially designed handle and unique head
keeps the handle in line with the tubing for
proper leverage, even during work.
JTC-4608 DIGITAL BATTERY TESTER
Display: 3 LED (Green, Yellow, Red).
No internal battery.
Test leads: 31 in. / 80 cm.
Application: 12V battery
Operating range: 200 ~ 1200CCA (SAE)
Rating system: SAE, DIN, EN, INE, CA
Test discharged battery: Down to 7V
Voltmeter: 7V ~ 15V
Tolerance: CCA: <+/- 10%
Resolution: 1 CCA
JTC-4609 DIGITAL BATTERY TESTER WITH PRINTER
Backlit display: 2 – lines, 16 – characters LCD
Thermal printer built inside.
Printing paper width: 37mm
Test code function can be added.
Test leads: 31 in. / 80 cm.
Software includes seven languages: English,
French, Spanish, Germany, Italian, Portuguese,
and Japanese.
Application: 6V & 12V batteries.
Operating range: 40 ~ 2000CCA (SAE)
Rating system: SAE, DIN, EN, IEC, JIS (Battery type
No.)
Test discharged batteries: Dow to 1.5V
Voltmeter: 1.5V ~ 30V
Tolerance: CCA: <+/- 15%, +/-0.05V
Resolution: 1 CCA
BATTERY & ELECTRICAL
JTC AUTO TOOLS 678 – 876 – 3470
2600 Northlake Dr. Suite F,
Suwannee, GA, 30024
JTC-4657 8-PCS A/C DISCONNECTION TOOL SET
All the disconnection tools you need to work
with spring locking coupling, fuel line, and
transmission cooler lines.
Content:
o Aluminum disconnect tool:
1/4" (black)
5/16" (red)
3/8" (yellow)
1/2" (blue)
o Two ends disconnect tool:
5/16" ~ 3/8"
o Long disconnect tool: 1/2"
o Round disconnect tool: 1/2"
o Two point disconnect tool & rubber cap x 4
JTC-4688 23–PCS TERMINAL RELEASE TOOL SET
Special design to release terminals from
the plastic connectors without damaging.
Release terminals on most body wiring
connectors.
Applicable: suitable for most vehicles
JTC-4790 ELECTRIC TEST CONNECTOR SET
Economic type connector set are
designing for car factory demand.
You can nimbly use it on the adjustment
and assistant the technician checking the
car problem rapidly and accurately.
Contents:
o 1 pc 5kΩ Potentiometer (Variable
resister)
o 2 pcs LED stroboscope
o 1 pc wire checking clips
o 6 pcs various automotive flat terminals
o 2 pcs Probe
o 1 pc SRS connector
o 2 pcs Alligator clip
o 4 pcs Acicular probe
o 4 pcs 1 to 1 connector
BATTERY & ELECTRICAL
JTC AUTO TOOLS 678 – 876 – 3470
2600 Northlake Dr. Suite F,
Suwannee, GA, 30024
JTC-4801 EXTRA LONG HIGH SIDE QUICK COUPLER
Total length: 85mm; O.D. : φ 26mm
The valve core puller is adjustable to fit
the different valve core.
Special extra-long design for narrow
space or deep hole.
Applicable: BMW 2004 later, VOLVO S series and many new models.
JTC-4870 ELECTRIC CIRCUIT TESTER (GENERAL & HYBRID
CAR)
Compatible with current 12V system plus
newer 42V system.
Safe for low current circuits since tester
only draws 3 milliamps at 12V.
Automatic voltage identification with
blue for 12V and red for 42V systems.
Two super – bright LEDs for visibility
under all conditions.
New crystal – clear handle provides 360° visibility, even in bright light.
JTC-4872 RUBBER SPARK PLUG REMOVER / INSTALLER
Flexible shaft permits access from many angles.
Easily insert and remove hard-to-reach spark
plugs with the flexible shaft tool.
Removing: use it to take out spark plugs from
deep hole.
Installing: use it to insert spark plugs into cylinder
grooves, and adjust it for installation.
Length: 330mm
BATTERY & ELECTRICAL
JTC AUTO TOOLS 678 – 876 – 3470
2600 Northlake Dr. Suite F,
Suwannee, GA, 30024
JTC-5621 AUTOMATIC WIRE STRIPPER & CRIMPER
The easy stripper cutters are made by
precision machines and HRC55-60 blade cuts
wire fast and smoothly.
Applicable:
o Stripper range: AWG 24-10 (0.2 ~ 6.0mm2)
o For insulated terminals: AWG 22-10
(0.5 ~ 6.0mm2)
o For non-insulated terminals: AWG 22-10
(0.5 ~ 6.0mm2)
o For auto ignition terminals: 7 - 8mm
JTC-5622 TIE GUN
Fasten and automatic cut ties with
adjustable bundling pressure.
Applicable: Tie thickness up to 1.6mm,
Tie width from 2.2 to 4.8mm
JTC-5629 BATTERY TERMINAL CRIMPING TOOL
Specially designed to provide a better
way to prevent over crimping and a neat
clean appearance.
It is essential tool for replacing or
repairing battery cable terminal ends.
Applicable: Terminal soze from 6 ga. To
4/0.
BATTERY & ELECTRICAL
JTC AUTO TOOLS 678 – 876 – 3470
2600 Northlake Dr. Suite F,
Suwannee, GA, 30024
JTC-5632 TUBE CUTTER & FLARING TOOL
Contents:
o Tube cutter: 1/8" ~ 1-1/8"
o Flaring tool: 3/16", 1/4", 5/16", 3/8",
7/16", 1/2", & 5/8"
Another kit JTC-5632M with metric size: 4, 6, 8, 10, 12, 14, 16mm.
JTC-1360A VALVE CORE REMOVER & INSTALLER TOOL KIT
Service valve cores without losing the system
charge.
Unique design offers a locking device that holds
the shaft in place while removing or installing the
valve cores.
Contents:
o Valve assembly
o Standard valve core remover / installer
o GM large bore valve core remover / installer
o JRA R134 valve core remover / installer
o Volvo and 8mm valve core remover / installer
o R134a H φ16 connector
o R134a L φ13 connector
o 5/16" FL swivel connector
o 1/4"FL swivel connector o Adapter 1/4"M x 3/16"F
o Adapter 1/4"M x 1/2" ACME F
o H14 Wrench
o Two sides valve core remover
JTC-1719A AUTO COMPUTER MEMORY UNIT
Maintains the memory of vehicle radios,
clock & computer functions when battery
is disconnected.
Simply attach a 9 volt battery & plug the
tool into cigarette lighter.
Keeps settings up to 4 hours
BATTERY & ELECTRICAL
JTC AUTO TOOLS 678 – 876 – 3470
2600 Northlake Dr. Suite F,
Suwannee, GA, 30024
JTC-1720A ADJUSTABLE SPARK GAP TESTER
Rapidly, accurately, safely, conveniently to judge
the quality of ignition system, depends on
difference types of car condition and adjust the
different gaps.
To judge the quality of coil according to spark
color and distance.
The car factory choose the appropriate coil
depends on engine and ignition system.
The airtight design to prevent the high volts
leakage.
Cylinder Pressure Adjustment Range
9.5 : under 1CM
9.5:1-10.5:1 1 – 2CM
10.5:1-11.5:1 2.5CM
JTC-4614B MULTI–FUNCTIONAL BATTERY TESTER (12V /
24V)
Functions: Battery testing: 12V common Lead –
Acid & AGM Battery Generator test, starting test.
Backlit display: 60 x 32mm (64 x 12B LCD)
Test leads: 100 cm
Voltmeter: 9 - 15 VDC (12V batteries)
Operating range: 100 - 1700 CCA (SAE)
Tolerance: CCA: <± 10% <± 0.1V
Rating system: CCA, DIN, EN , IEC, JIS
Electronic logic test – to test through low–
frequency signals without external load large
battery tester. To repeat the test, no safety
concerns.
Language: English, Chinese, and etc. But only one
mode can be selected as you purchase.
JTC-4726A OBD-II POWER SUPPLY ADAPTER
Special adapter to prevent lose any data from
replacing the battery.
Connect the adapter from battery to OBD-II plug
for continue power supply.
Optional power supplier: ①12V battery ②9V
dry battery
The adapter with 2 LEDs to show if the battery is
enough.
9V
12V