battery energy storage - aceon group · intelligent battery management system high operational...
TRANSCRIPT
BATTERY ENERGY STORAGERESIDENTIAL | COMMERCIAL | INDUSTRIAL
Working with MCS to help develop the new battery standard
(MIS 3012)
BATTERIES INVERTERS SOLAR PANELS
PLEASE CONTACT US AT:01952 293 [email protected] (UK)
TECHNICAL PROPERTIES OF A SINGLE MODULE
LITHIUM-ION TECHNOLOGY
6
GO WITH THE BEST FOR YOUR CUSTOM-TAILORED SOLUTION
GENERAL PROPERTIES ESS 7.0Energy (nom./usable) 6.74 kWh/5.39 kWh Nominal voltage 55.5 V Charge end voltage 61.5 V Discharge end voltage 45.0 V Capacity (nom./usable) 121.5 Ah/ 97.2 Ah Max. charge 90 A Max. discharge current 300 A ( 3 sec.) Max. discharge power 18 kW* Weight 95 kgDimensions (mm) W x H x D 638 x 421 x 487 mm Communication CAN – SMA ready Battery chemistry Li-Ion NMC Discharge depth 80% DOD Full cycles 5,000
Battery Management System
Monitoring of cell voltage, cell temperature,current, derating and pas-sive balancing
PERFORMANCE DATA
Energy density (weight) 71 Wh/kg
GET A LONG BENEFIT WITH 5,000 CYCLES
GENERAL PROPERTIES ESS 9.0Energy (nom./usable) 8.5 kWh/6.8 kWhNominal voltage 54.0 VCharge end voltage 61.5 VDischarge end voltage 45.0 VCapacity (nom./usable) 156.6 Ah/125.3 AhMax. charge 90 AMax. discharge current 300 A ( 3 sec.)Max. discharge power 18 kW*Weight 97 kgDimensions (mm) W x H x D 638 x 421 x 487 mmCommunication CAN – SMA readyBattery chemistry Li-Ion NMCDischarge depth 80% DODFull cycles 5,000
Battery Management System
Monitoring of cell voltage, cell temperature,current, derating and pas-sive balancing
PERFORMANCE DATA
Energy density (weight) 87.6 Wh/kg
HIGH PERFORMANCE FOR YOUR BUSINESS
MAXIMUM POWER FOR YOUR BUSINESS
FOR YOUR FLEXIBILITY
maximum discharge power
up to 18 kW*
scalable up to
12 modules*
ESS 7.0: Lithium-Ion Power
ESS 9.0: Lithium-Ion Power
*depends on the respective inverter*Valid for ESS 7.0, 9.0 and ESS X
ENERGY STORAGE SYSTEMS
7
OUR DEVICES ARE UN CERTIFIED FOR SOUNDNESS AND SAFETY
MULTI-LEVEL-SAEFTY CONCEPT
J Short circuit proof relay and 2nd protection (pyro fuse) for a redundant battery cut-off
J Overvoltage and low voltage monitoring for each cell string with redundant battery cut-off
J Temperature monitoring for each cell string and current interrupt device (CID) in each cell
J Protection against a reboot after deep discharge or any other serious error
J No insecure parallel connection of cells without current interrupt device (CID) in each cell
J Active current control as a function of cell voltage and temperature (derating)
J Double metal housing
GET A LONG BENEFIT WITH 5,000 CYCLESMAXIMUM CAPACITY
maximum energy density*
ESS X: Lithium-Ionen Power
Future proof solution
Robust and compact design
Intelligent Battery Management System
High operational safety
GENERAL PROPERTIES ESS XEnergy (nom./usable) 10.06 kWh/8.05 kWhNominal voltage 54.0 VCharge end voltage 61.5 VDischarge end voltage 45.0 VCapacity (nom./usable) 186.3 Ah/149.1 AhMax. charge 90 A Max. discharge current 300 A ( 3 sec.)Max. discharge power 18 kW*Weight 99 kgDimensions (mm) W x H x D 638 x 421 x 487 mmCommunication CAN – SMA ready Battery chemistry Li-Ion NCADischarge depth 80% DODFull cycles 5.000
Battery Management System
Monitoring of cell voltage, cell temperature,current, derating and pas-sive balancing
PERFORMANCE DATA
Energy density (weight) 101.6 Wh/kg
FLEXIBLE ADAPTABILITY DUE TO THE MODULAR AND COMPACT DESIGN
TECHNICAL PROPERTIES• Powerful energy storage system• New lithium-ion technology: a 10 year warranty covering the system’s
current value• High efficiency: 95 %• High discharge depth: 80 % DOD (Depth of Discharge)• Durable: 5,000 full cycles• Parallel installation of max. 12 modules possible• High operational safety
SAFETY MEASURES• Direct current relay and 2nd protection (chemical fuse) for a redundant
battery cut-off• Overvoltage and low voltage monitoring for each cell string with
redundant battery cut-off• Temperature monitoring for each cell string • Current interrupt device (CID) in each cell• Protection against a reboot after deep discharge or any other serious
error• Active current control as a function of cell voltage and temperature
(derating)• Closed metal, double housing
USER INFORMATION• Discharge temperature (cells): 2 °C to +45 °C• Charge temperature (cells): 2 °C to +45 °C• Recommended storage temperature: 10 °C to 25 °C• Self discharge (cells): ca. 2 % per year• Stand-by consumption:
Active mode 5 W / Sleep mode 0.126 W
• Max. parallel connection (of batteries): 12 (additional hardware required)
• Protection class: IP 21• European Conformity (CE):
yes• UN-test 38.3: yes• Warranty: 10 year warranty
covering the system’s current value
INTELLIGENT BATTERY MANAGEMENT SYSTEM
HIGH OPERATIONAL SAFETY
FUTURE PROOF SOLUTION
ROBUST AND COMPACT DESIGN
OUR DEVICES ARE UN CERTIFIED FOR SOUNDNESS AND SAFETY
MULTI-LEVEL-SAEFTY CONCEPT
• Short circuit proof relay and 2nd protection (pyro fuse) for a redundant battery cut-off
• Overvoltage and low voltage monitoring for each cell string with redundant battery cut-off
• Temperature monitoring for each cell string and current interrupt device (CID) in each cell
• Protection against a reboot after deep discharge or any other serious error
• No insecure parallel connection of cells without current interrupt device (CID) in each cell
• Active current control as a function of cell voltage and temperature (derating)
• Double metal housing
DLS-600C-COMPACT DLS-600L/DLS-600Input(PV)Max.DCpower 6.3kW 6.3kWMax.DCvoltagePV-voltagerange,MPPTPV-voltagerange,MPPT-IndipendentOperationPV-voltagerange,MPPT-ParallelOperation
100V-550V100V-550V@3kW
100V-550V100V-550V@4kW
[email protected] 3kW 4kWMaxDCpowerxMPPT-Unbalancedoperation 4kW@MPPT1+2.3kW@MPPT2 4kW@[email protected] 20A 20ANumberofMPPtrackers(DLSI-Track)Battery(BATT)BatteryCurrent 35A 66A/100ABatteryMaxCharge/dischargepower 2.3kW 3kW/4.5kWInput(ACGRID)ACinputvoltageACinputfrequencyOutput(AC)RatedOutputACpower-(PV+BATT) 6kVA(4.5kVAVDEAR-N4105) 6kVA(4.5kVAVDEAR-N4105)MaxOutputACpower-(PV+BATT) 6kVA(4.5kVAVDEAR-N4105) 6kVA(4.5kVAVDEAR-N4105)RatedOutputACpower-(BATT) 2.2kVA 3kVA/4.5kVAMaxOutputACpower-(BATT) 2.2kVA 3kVA/4.5kVANominaloutputcurrent(RMS) 26.1A 26.1AACoutputvoltageACoutputfrequencySystemOperatingModeBACKUPMODEoperationEfficiency(PV-ACoutput)Max.efficiencyEfficiency(BATT-ACoutput)Max.efficiencyProtectiondevicesACsafetyinterlocksystemManualACGRIDBY-PASSswitchGroundfaultmonitoringGridmonitoring&synchronizationBATTDCGalvanicallyisolatedGeneralDataDimensions(W/H/D)inmm 480/730160 710/650/150Weight 21KG <30kgOperatingtemperaturerangePowerderatingtemperaturerangeStoragetemperaturerangeFeaturesPVDCconnectionDCBATconnectionACconnectionIngressprotectionGraphicdisplaytouchscreenInterfaces:RS485/RS232/CAN/USB/Ethernet/WiFiWarranty:
Certificates
Key: ¿ Standardfeature ¯ Optionalfeature***Underrequest–Notavailable
400V
115v
2
97%
40°C…+60°C-30°C…+70°C
-25°C…+60°C
IP21
230Vac±15%
5YearStandard/10yearOptional¿/¿/¿/¿/¿/¯
50/60Hz
230Vac±15%50/60Hz
automatic
94%
¿
IEC62109-1(Safety),IEC62109-2(Safety),IEC61000-6-2(EMC),IEC61000-6-3(EMC)
600v
MC4quickconnectorscrewterminalblockscrewterminalblock
¿
¿¿¿¿
DELIOS RANGE OF INVERTERS DC COUPLEDDLS-300DLS-450DLS-450HDLS -600LDLS-600DC COUPLED COMPACTDLS-300CDLS-450CDLS-600CAC COUPLED DLS- 230ACDLS-300ACDLS-450AC
NEW 2020: THREE PHASE HYBRID INVERTER(DELIOS DLX HYBRID)
THE DLS SYSTEM IS THE HEART AND BRAIN OF THE INTEGRATED ENERGY MANAGEMENT• Compact• Very high efficiency from panels and batteries (>97%)• Minimum size and weight (wall mount in tight spaces)• Low audible noise
ALL-IN SYSTEM• "ALL INCLUSIVE" system that allows an integrated management
of the energy:• Photovoltaic panels• Storage battery• Households appliances• Grid energy• Secondary storage system (e.g.heat pumps}• Power generator set
TWO INDIPENDENT MPPT TRACKERS "MPPT I-TRACK"• Optimized management of two indipendent and separate PV strings• Maximum yield from the PV panels in all conditions
TRUE OUTPUT POWER• Intelligent management of the power to guarantee continuity
of service with any domestic load, also the heaviest (pumps and compressors)
SMART BATTERY MANAGER (Patent Pending)• Precise control of the charge/discharge process with optimized
curves and total absence of ripple in the battery current to enesure maximum efficiency and duration of the storage unit
EMBEDDED ENERGY CONTROLLER• Integrated energy management• Easy programmable activation of household applicance by control panel• Remote activation of power generator set (optional)
BMZ ESS ARE ALSO COMPATABLE WITH THE FOLLOWING INVERTERS
DELIOS RANGE OF SINGLE PHASE INVERTERS
THE NEW CERTIFICATIONSIEC 61215 e 61730 ed. 2016
Certified, guaranteedand insured PV modules
Max power decrease 0.5% /year
97% at the end of the first year
90% at the end of the 20th year
87% at the end of the 25th year
Performance guarantees
Market standard performances
FuturaSun performances
NEW
We are the first manufacturer which has completed the qualification in Europe for the new international standards IEC 61215:2016 and IEC 61730:2016 at TÜV Rheinland Cologne.Our PV-Modules passed all 60 Quality-Tests at the famous german labo-ratories.
In 2016, the Electronical Commission have revised the standards IEC 61215 and IEC 61730. The previous edition, released in 2005, has been updated to match the current panel technology and the real needs of the market. Furthermore, also new safety standards have been added.
The most important aspects of the new certification:
NOCT becomes NMOT (Nominal Module Operating Temperature)Pmax, Isc, Voc are confirmed by lab measurementsChanged criteria for the 1500 V certificationMechanical load with safety factor of 1.5xNew ignitability testIncreased insulation requirementsHigh temperature resistance (tested at 105 °C for 200 hours) Terminations can withstand stresses caused by assembly or handling operationsNew security criteria for the junction box (IEC 62790)Hot-Spot-Test
FUTURASUN GUARANTEESProduct guarantee 15 years
Our modules are insured by the historic Lloyds of London.
The product liability insurance provides coverage for any damage which may occur during the module’s lifetime, e.g. the risk of fire, and it’s a further guarantee of the quality of our products as well as the reliability of our brand.
PRODUCT LIABILITY INSURANCE
1 Resistance test
2 New ignitabily test
3 Snow load test
1
2
3
25 YEARS
INSURANCELIABILITY
GUARANTEEPRODUCT
15 YEARS
GUARANTEEPERFORMANCE
25 YEARS
Photos: © TÜV
THE NEW CERTIFICATIONSIEC 61215 e 61730 ed. 2016
Certified, guaranteedand insured PV modules
Max power decrease 0.5% /year
97% at the end of the first year
90% at the end of the 20th year
87% at the end of the 25th year
Performance guarantees
Market standard performances
FuturaSun performances
NEW
We are the first manufacturer which has completed the qualification in Europe for the new international standards IEC 61215:2016 and IEC 61730:2016 at TÜV Rheinland Cologne.Our PV-Modules passed all 60 Quality-Tests at the famous german labo-ratories.
In 2016, the Electronical Commission have revised the standards IEC 61215 and IEC 61730. The previous edition, released in 2005, has been updated to match the current panel technology and the real needs of the market. Furthermore, also new safety standards have been added.
The most important aspects of the new certification:
NOCT becomes NMOT (Nominal Module Operating Temperature)Pmax, Isc, Voc are confirmed by lab measurementsChanged criteria for the 1500 V certificationMechanical load with safety factor of 1.5xNew ignitability testIncreased insulation requirementsHigh temperature resistance (tested at 105 °C for 200 hours) Terminations can withstand stresses caused by assembly or handling operationsNew security criteria for the junction box (IEC 62790)Hot-Spot-Test
FUTURASUN GUARANTEESProduct guarantee 15 years
Our modules are insured by the historic Lloyds of London.
The product liability insurance provides coverage for any damage which may occur during the module’s lifetime, e.g. the risk of fire, and it’s a further guarantee of the quality of our products as well as the reliability of our brand.
PRODUCT LIABILITY INSURANCE
1 Resistance test
2 New ignitabily test
3 Snow load test
1
2
3
25 YEARS
INSURANCELIABILITY
GUARANTEEPRODUCT
15 YEARS
GUARANTEEPERFORMANCE
25 YEARS
Photos: © TÜV
OUR SERVICE FOR YOUR SATISFACTION• SERVICE HOTLINE• ON-SITE SERVICE• ORIGINAL SPARE PARTS DEPOT• PICK UP SERVICE OF FAILURE BATTERIES • DISPATCH OF REPAIRED AND PROOFED BATTERIES• FULLY EQUIPPED UK SERVICE CENTER• SKILLED AND EXPERIENCED EMPLOYEES
PLEASE CONTACT US AT:[email protected] 293 388WWW.ACEONGROUP.COM
Technical properties 3 modules 4 modules 5 modules 6 modules
Energy (nom./usable) 9 kWh/7.5 kWh 12 kWh/10 kWh 15 kWh/12.5 kWh 18 kWh/15 kWh
Nominal voltage 155 V 207 V 258 V 310 V
Charge end voltage 172.5 V 230.0 V 287.5 V 345.0 V
Discharge end voltage 126 V 168 V 210 V 252 V
Capacity (nom.) 57 Ah
Max. charging current 30 A
Max. discharge current (3s) 40 A
Max. discharge capacity (3s) 6.2 kW 8.3 kW 10.3 kW 12.4 kW
Max. discharge power 4.6 kW 6.2 kW 7.7 kW 9.3 kW
Weight 45 kg + 3*22 kg 45 kg + 4*22 kg 45 kg + 5*22 kg 45 kg + 6*22 kg
Dimensions (W x H x D) 750 x 890 x 420 mm
Discharge operating temperature -20 up to 55 ° C
Charge operating temperature 0 up to 45 ° C
Storage temperature -20 up to 60 ° C
Compatibility (interface) SMA Sunny Boy Storage (CAN) / KOSTAL Plenticore Plus (RS-485)
Battery chemistry Li-Ion NCA/NCM
Depth of discharge 83% DOD (related to the nom. capacity)
Full cycles 5000 or 3000 (with remaining capacity of 60% or 80%)
HYPERION
BMZ France S.A.R.L.
45 Boulevard Vincent Auriol75013 ParisFrance
Phone +33 (0)9 87 37 42 62
BMZ Poland Sp.z.o.o.
Alberta Einsteina 944-109 GliwicePoland
Phone +48 327842 450
©BMZ 05.2019. All rights reserved. Preliminary data sheet. Although great care has been taken in preparing this printed matter, BMZ cannot be held responsible
for any errors or omissions. All information here is subject to change without notice.
BMZ GmbH
Am Sportplatz 2863791 Karlstein am MainGermany
Phone +49 6188-9956-0
[email protected] www.bmz-group.com
MODULAR AND EXTENDABLEROBUST AND SAFEEMERGENCY POWER
NEW FOR 2020: HYPERIONMODULAR AND EXTENDABLE // ROBUST AND SAFE // EMERGENCY POWER
THE NEW CERTIFICATIONSIEC 61215 e 61730 ed. 2016
Certified, guaranteedand insured PV modules
Max power decrease 0.5% /year
97% at the end of the first year
90% at the end of the 20th year
87% at the end of the 25th year
Performance guarantees
Market standard performances
FuturaSun performances
NEW
We are the first manufacturer which has completed the qualification in Europe for the new international standards IEC 61215:2016 and IEC 61730:2016 at TÜV Rheinland Cologne.Our PV-Modules passed all 60 Quality-Tests at the famous german labo-ratories.
In 2016, the Electronical Commission have revised the standards IEC 61215 and IEC 61730. The previous edition, released in 2005, has been updated to match the current panel technology and the real needs of the market. Furthermore, also new safety standards have been added.
The most important aspects of the new certification:
NOCT becomes NMOT (Nominal Module Operating Temperature)Pmax, Isc, Voc are confirmed by lab measurementsChanged criteria for the 1500 V certificationMechanical load with safety factor of 1.5xNew ignitability testIncreased insulation requirementsHigh temperature resistance (tested at 105 °C for 200 hours) Terminations can withstand stresses caused by assembly or handling operationsNew security criteria for the junction box (IEC 62790)Hot-Spot-Test
FUTURASUN GUARANTEESProduct guarantee 15 years
Our modules are insured by the historic Lloyds of London.
The product liability insurance provides coverage for any damage which may occur during the module’s lifetime, e.g. the risk of fire, and it’s a further guarantee of the quality of our products as well as the reliability of our brand.
PRODUCT LIABILITY INSURANCE
1 Resistance test
2 New ignitabily test
3 Snow load test
1
2
3
25 YEARS
INSURANCELIABILITY
GUARANTEEPRODUCT
15 YEARS
GUARANTEEPERFORMANCE
25 YEARS
Photos: © TÜV
THE NEW CERTIFICATIONSIEC 61215 e 61730 ed. 2016
Certified, guaranteedand insured PV modules
Max power decrease 0.5% /year
97% at the end of the first year
90% at the end of the 20th year
87% at the end of the 25th year
Performance guarantees
Market standard performances
FuturaSun performances
NEW
We are the first manufacturer which has completed the qualification in Europe for the new international standards IEC 61215:2016 and IEC 61730:2016 at TÜV Rheinland Cologne.Our PV-Modules passed all 60 Quality-Tests at the famous german labo-ratories.
In 2016, the Electronical Commission have revised the standards IEC 61215 and IEC 61730. The previous edition, released in 2005, has been updated to match the current panel technology and the real needs of the market. Furthermore, also new safety standards have been added.
The most important aspects of the new certification:
NOCT becomes NMOT (Nominal Module Operating Temperature)Pmax, Isc, Voc are confirmed by lab measurementsChanged criteria for the 1500 V certificationMechanical load with safety factor of 1.5xNew ignitability testIncreased insulation requirementsHigh temperature resistance (tested at 105 °C for 200 hours) Terminations can withstand stresses caused by assembly or handling operationsNew security criteria for the junction box (IEC 62790)Hot-Spot-Test
FUTURASUN GUARANTEESProduct guarantee 15 years
Our modules are insured by the historic Lloyds of London.
The product liability insurance provides coverage for any damage which may occur during the module’s lifetime, e.g. the risk of fire, and it’s a further guarantee of the quality of our products as well as the reliability of our brand.
PRODUCT LIABILITY INSURANCE
1 Resistance test
2 New ignitabily test
3 Snow load test
1
2
3
25 YEARS
INSURANCELIABILITY
GUARANTEEPRODUCT
15 YEARS
GUARANTEEPERFORMANCE
25 YEARS
Photos: © TÜV
THE NEW CERTIFICATIONSIEC 61215 e 61730 ed. 2016
Certified, guaranteedand insured PV modules
Max power decrease 0.5% /year
97% at the end of the first year
90% at the end of the 20th year
87% at the end of the 25th year
Performance guarantees
Market standard performances
FuturaSun performances
NEW
We are the first manufacturer which has completed the qualification in Europe for the new international standards IEC 61215:2016 and IEC 61730:2016 at TÜV Rheinland Cologne.Our PV-Modules passed all 60 Quality-Tests at the famous german labo-ratories.
In 2016, the Electronical Commission have revised the standards IEC 61215 and IEC 61730. The previous edition, released in 2005, has been updated to match the current panel technology and the real needs of the market. Furthermore, also new safety standards have been added.
The most important aspects of the new certification:
NOCT becomes NMOT (Nominal Module Operating Temperature)Pmax, Isc, Voc are confirmed by lab measurementsChanged criteria for the 1500 V certificationMechanical load with safety factor of 1.5xNew ignitability testIncreased insulation requirementsHigh temperature resistance (tested at 105 °C for 200 hours) Terminations can withstand stresses caused by assembly or handling operationsNew security criteria for the junction box (IEC 62790)Hot-Spot-Test
FUTURASUN GUARANTEESProduct guarantee 15 years
Our modules are insured by the historic Lloyds of London.
The product liability insurance provides coverage for any damage which may occur during the module’s lifetime, e.g. the risk of fire, and it’s a further guarantee of the quality of our products as well as the reliability of our brand.
PRODUCT LIABILITY INSURANCE
1 Resistance test
2 New ignitabily test
3 Snow load test
1
2
3
25 YEARS
INSURANCELIABILITY
GUARANTEEPRODUCT
15 YEARS
GUARANTEEPERFORMANCE
25 YEARS
Photos: © TÜV
THE NEW CERTIFICATIONSIEC 61215 e 61730 ed. 2016
Certified, guaranteedand insured PV modules
Max power decrease 0.5% /year
97% at the end of the first year
90% at the end of the 20th year
87% at the end of the 25th year
Performance guarantees
Market standard performances
FuturaSun performances
NEW
We are the first manufacturer which has completed the qualification in Europe for the new international standards IEC 61215:2016 and IEC 61730:2016 at TÜV Rheinland Cologne.Our PV-Modules passed all 60 Quality-Tests at the famous german labo-ratories.
In 2016, the Electronical Commission have revised the standards IEC 61215 and IEC 61730. The previous edition, released in 2005, has been updated to match the current panel technology and the real needs of the market. Furthermore, also new safety standards have been added.
The most important aspects of the new certification:
NOCT becomes NMOT (Nominal Module Operating Temperature)Pmax, Isc, Voc are confirmed by lab measurementsChanged criteria for the 1500 V certificationMechanical load with safety factor of 1.5xNew ignitability testIncreased insulation requirementsHigh temperature resistance (tested at 105 °C for 200 hours) Terminations can withstand stresses caused by assembly or handling operationsNew security criteria for the junction box (IEC 62790)Hot-Spot-Test
FUTURASUN GUARANTEESProduct guarantee 15 years
Our modules are insured by the historic Lloyds of London.
The product liability insurance provides coverage for any damage which may occur during the module’s lifetime, e.g. the risk of fire, and it’s a further guarantee of the quality of our products as well as the reliability of our brand.
PRODUCT LIABILITY INSURANCE
1 Resistance test
2 New ignitabily test
3 Snow load test
1
2
3
25 YEARS
INSURANCELIABILITY
GUARANTEEPRODUCT
15 YEARS
GUARANTEEPERFORMANCE
25 YEARS
Photos: © TÜV