COLOR TECHNICAL SHEETS

EXTRA BLONDE EXTRA COVERAGENEW

LIGHTENING SYSTEM

BATTLE BLONDESOFTHE

I M A G I N E A L L Y O U C A N B E

02 In the mid-section, take a diagonal section in the opposite direction of the nape. Slice in the same manner as the previous section. Apply FORMULA B from scalp to pre-lightened ombre ends. Leave a section of hair in between foils. Repeat this application method until entire mid-section is complete.

03 On the top section, starting on the right side create a diagonal slice about 2cm from the front hairline place a foil apply FORMULA A from scalp to ends.Leave a section of hair in between foils, moving towards the crown create a diagonal slice place a foil apply FORMULA B in the same manner. Continue alternating until the crown is reached. Repeat on the left side.

04 Allow to process at room temperature for 35 minutes. Rinse, shampoo and condition.

01 Starting in the nape region, take a diagonal slice, place on foil and apply FORMULA A from scalp to pre-lightened ombre ends. Leave a section of hair in between foils. Repeat this application method until entire nape section is complete.

MASTERY POINT: Leave any pre-lightened hair out of foil to avoid over toning and processing.

S E C T I O N I N G • Section as shown using horseshoe pattern.

F O R M U L A SNatural level 6, with pre-lightened ombre ends FORMULA A: SOCOLOR 30ml UL-IA & 60ml 12% (40V) MATRIXCream Developer FORMULA B: SOCOLOR 30ml UL-M & 60ml 12% (40V) MATRIX Cream Developer

C O L O R T E C H N I Q U E

U LT R A L I F T B L O N D E

01

02

03

04

I M A G I N E A L L Y O U C A N B E

01 Apply FORMULA A to the re-growth area of the entire head using horizontal sections. Pull through to the ends for the last 15 minutes as needed. Allow to process at room temperature for 35-45 minutes. Rinse, shampoo and condition. Blowdry the hair before moving on to Step 2.

S E C T I O N I N G • Section hair into quadrants as shown.

F O R M U L A SNatural level 7, 75% white hair with re-growth and pre-lightenedpieces to a level 9 and 10. FORMULA A: 60g SOCOLOR 510GV & 60g 6% (20V) MATRIX Cream Developer FORMULA B: Light Master 6% (20V) Developer FORMULA C: 60g Color Sync 8WN & 60g 3% (10V) MATRIX Cream Developer

C O L O R T E C H N I Q U E

H I G H C O V E R A G E B L O N D E

01

02

1

3 2

03

04

02 Take a section from ear to ear across the top of the head. Secure the section at the back of the head. This is SECTION 1. Place a side parting. Secure creating SECTIONS 2 & 3.

03 Starting at the hairline in SECTION 2, take diagonal sections, place on foil and apply FORMULA B mid-lengths to ends. Leave a 2cm gap apply FORMULA B in the same manner. Continue until section is complete. Repeat in SECTION 3.

04 Working randomly around the head, 20 minutes prior to rinsing foils, apply FORMULA C using a painting method from scalp to ends. Allow to process at room temperature for 20 minutes. Rinse, shampoo and condition. MASTERY POINT: Tone the highlights as needed using Color Sync.

HIGH COVERAGE COOLS

Q. What is the Extra Blonde shade series?A. The Extra Blonde series gives colorists maximum lifting action and toning in one easy step.It is designed for natural levels 5 and higher.

Q. What is the mixing and timing for the Extra Series?A. All of the Extra Blondes are mixed in a 1:2 ratio with 9% or 12 % (30 or 40 Volume) only, and should only be used with Matrix Cream Developer. They are processed for 50 minutes without heat.Example: 30ml UL-AA + 60ml SOCOLOR.beauty 12% (40 Volume) developer.

Q. Can the new Extra Blonde shades be mixed with other SOCOLOR.beauty shades?A. The Extra Blondes cannot be mixed with other SOCOLOR.beauty shades, but can be intermixed within the Extra series.The Extra Blondes are formulated for maximum lifting and are used with 9% or 12% (30 or 40 Volume) developer only.

Q. Can I achieve grey coverage with the new Extra Blonde shades?A. The Extra shades are not recommended for grey coverage or to be used on anyone with more than 25% grey.

Q. Can I refresh with Color Sync?A. Yes. To maintain optimal results, refresh using the Color Sync Sheer Pastel series or using a Color Sync 9 or 10 level shade mixed with Clear. Apply and take a strand test every 5 minutes to insure proper timing.

ULTRA L I FT BLONDEQ & A

Q. What are the new SOCOLOR.beauty Extra Coverage Blonde shades?A. The new SOCOLOR.beauty shades feature three level 10 shades. These shades provide a range of new possibilities for grey coverage and blending at the lightest level. With a subtle range of tone, from neutral, to ash, to gold.

Q. How can I identify the new SOCOLOR.beauty Extra Coverage Blonde shades?A. The new SOCOLOR.beauty Extra Coverage Blonde shades are identified by the numbers 510 and the letters G, N and Na.The shades in the series are:510G – Extra Coverage Extra Light Gold Blonde510N - Extra Coverage Extra Light Neutral Blonde510Na - Extra Coverage Extra Light Neutral Ash Blonde

Q. How are the new SOCOLOR.beauty Extra Coverage Blonde shades used?A. The new SOCOLOR.beauty Extra Coverage Blonde shades can be used exactly like the other SOCOLOR 500 series shades. They can be used alone or mixed with any other SOCOLOR.beauty family to add extra grey coverage to your formula. The 500 series is recommended for use on hair that is 50% grey or more.

Q. On what levels can the new SOCOLOR.beauty Extra Coverage Blonde shades be used?A. The new SOCOLOR.beauty Extra Coverage Blondes are available in 3 shades: 510G, 510N and 510Na.The shades are recommended to be used on levels 7 to 10 with 50% or more grey. Mix with 6% (20V) Matrix Cream Developer for best results.

Q. What is the mixing and timing for the new SOCOLOR.beauty Extra Coverage Blonde shades?A. The new SOCOLOR.beauty Extra Coverage Blonde shades are mixed like any SOCOLOR 500 series shade: 1:1 with 6% (20V) Matrix Cream Developer. Process for 35 to 45 minutes at room temperature without using heat.Example: 45ml 510G + 45ml 6% (20V) Matrix Cream Developer

Q. Can I achieve grey coverage with the new SOCOLOR.beauty Extra Coverage Blonde shades?A. The new SOCOLOR.beauty Extra Coverage Blonde shades provide maximum grey coverage for a level 10 and are recommended for hair that is 50% or more grey. As a general rule for coverage, best coverage is achieved when choosing a shade that is 1-2 levels from the starting level. That means that hair that is a level 8 or lighter or more than 75% non-pigmented will achieve the best coverage with the 510 shades. Hair that is darker than a level 8 and between 50-75% non-pigmented will result in blending.

Q. Can I use a different volume of developer with the 500 series?A. Yes, but for the best most predictable results when covering grey hair it is recommended to use 6% (20V). Using a different developer such as 3% (10V) or 9% (30V) could result in less coverage, banding or results that are warmer than expected.

HIGH COVERAGE BLONDEQ & A

I M A G I N E A L L Y O U C A N B E

LIGHTENING SYSTEM • NO AMMONIA

01

02

03

I M A G I N E A L L Y O U C A N B E

LIGHT-BRITE

02 Take a zig-zag pattern around the parietal ridge and secure. This is Section 1. • At each point, create a diamond. These diamonds are Section 2. • The remaining hair is Section 3.

03 Start in the front on the right side of Section 2 and take a 1cm diagonal slice on the lower right side of the diamond. Place on a foil and apply FORMULA B from scalp to ends and fold in the craft method. Repeat on the left side of the head. • Return to the right side of the same diamond on the lower left side section and take a 1cm slice. Place on a foil and apply FORMULA B from scalp to ends. Repeat on the left side of the head. • Move to the next diamond sub-section and repeat the above steps until completed. MASTERY POINT: Work from the right side of the head to the left and back again to ensure even processing. • Apply FORMULA C to Sections 1 and 3. Begin in Section 3 and work up the head applying Section 1 last. Allow to process at room temperature for up to 20 minutes or until desired tone is achieved. Rinse, shampoo and condition.

01 Apply FORMULA A to the re-growth area of the entire head using fine horizontal sections. Cross-check taking vertical sections to ensure complete coverage of lightener. • Allow to process at room temperature until reaching a level 10 or for up to 50 minutes. Rinse, shampoo and condition. • Gently blow-dry the hair before moving on to Step 2.

A great step by step to apply dimension withlowlights to an on scalp all over ultra light blonde.

• Section hair into quadrants as shown.

NATURAL LEVEL 8with re-growth and pre-lightened midlengths & ends to a level 10.

FORMULA A - One sachet ofLIGHTINSIDER Lightening BoosterPowder, 90g 6% (20V) COLORINSIDEROil-Cream Developer, and one tube ofLIGHTINSIDER Lightening ConditioningCream.

FORMULA B - 30g COLOR SYNC 10P& 8P and 60g MATRIX 2.7% (9V) CreamDeveloper

FORMULA C - 60g COLOR SYNCSPV and 60g MATRIX 2.7% (9V) CreamDeveloper

SECTIONING

COLOR STEPS

I M A G I N E A L L Y O U C A N B E

01

02

03

SEGMENT LIGHTS

02 Resection hair as in Step 1, creating the zig-zag section. Add the lightened pieces to Section 1.

03 Apply FORMULA B to Section 2 from scalp to ends. • Apply FORMULA C to Section 1 and lightened pieces in the same manner. • Process for up to 20 minutes or until desired tone is achieved. Rinse, shampoo and condition. MASTERY POINT: To have more control and with longer hair, use a paddle tool and assist in the ap-plication. When using the paddle ensure the prod-uct is applied to the paddle first, then place the hair on top, distributed product evenly and thoroughly using the brush to spread the product and apply more product where needed.

A simple painting technique using a freehand method that can be used on pre-colored hair orfor low maintenance caring lightening.

• Take a zig-zag section around the top of the head, and secure with a clip. This is Section 1. The remaining hair is Section 2.

NATURAL LEVEL 9 This technique can be used on a level 9or following a regrowth application. FORMULA A - One sachet of LIGHTISIDER Lightening Booster Powder, 90gCOLORINSIDER 3% (10V) Oil-CreamDeveloper, and one tube of LIGHTINSIDERLightening Conditioning Cream FORMULA B - 60g COLOR SYNC 8Gand 60g MATRIX 2.7% (9V) CreamDeveloper FORMULA C - 60g COLOR SYNC SPNand 60g MATRIX 2.7% (9V) CreamDeveloper

01 At each inverted point, take a small triangle section and hold the hair straight out from the head. Keep the hair taught and apply FORMULA A using a free hand method. First apply to the underside of the section with a side brush technique, then apply to the top part of the section. For a soft transition apply 1-2 cm from the scalp. • Place a piece of cotton to protect the remaining hair from the lightened piece. Continue in this man-ner in each section until complete. • Process for up to 50 minutes or until a level 10 is reached. Rinse, shampoo and condition. Towel-dry the hair before moving on to Step 2.

SECTIONING

COLOR STEPS

I M A G I N E A L L Y O U C A N B E

01

0202 Apply FORMULA B to re-growth area in all sections and in-between foils. Allow to process at room temperature up to 35 minutes. Rinse and shampoo. Ensure hair is towel dried. • Apply FORMULA C to all of the hair to tone highlights and refresh ends. • Process for up to 20 minutes or until desired tone is reached. Rinse, shampoo and condition.

01 Take a slice at the front on the right side. Place the foil and apply FORMULA A from scalp to ends. Repeat on the left side. • Return to the right side, leave approximately 2cm and take the next slice. Apply FORMULA A in the same manner. • Continue working from side to side until foiling in Sections 1 and 2 are complete.

Lightinsider is the perfect partner to Colorinsider. touch up the re-growth with Colorinsider andcreate some highlights with Lightinsider.

• Divide hair in half from front to below crown area. Create 2 zig-zag sections around the parietal ridge. Secure in clips. This becomes Section 1 and 2. • The remaining hair is Section 3.

NATURAL LEVEL 6 50% grey with previously coloredmid-lengths and ends.

FORMULA A - One sachet ofLIGHTINSIDER Lightening BoosterPowder, 90g COLORINSIDER 6% (20V)Oil-Cream Developer, and one tubeof LIGHTINSIDER Lightening ConditioningCream.

FORMULA B - 60g COLORINSIDER COV6M and 60g COLORINSIDER 6% (20V)Oil-Cream Developer.

FORMULA C - 60g COLOR SYNC 10Mand 60g MATRIX 2.7% (9V) CreamDeveloper.

SECTIONING

COLOR STEPS

CHROMA LIGHT

I M A G I N E A L L Y O U C A N B E

01

02

01 On the right side in Section 2, approximately 2cm from the hairline, take a diagonal slice. Place on foil and apply FORMULA A to the mid-lengths and ends, ensuring even product distribution. • On the same foil, apply the product up to the root area using a side brush technique, leaving a gap approximately 3cm from the scalp. Repeat on the left side in the same manner. • Return to the right side, leave a 2cm section and take the next diagonal slice. Apply FORMULA A in the same manner. Continue working until Section 2 is complete • Allow to process at room temperature for up to 50 minutes or until a level 8 is reached. Rinse and shampoo.

01 Ensure hair is towel dried well. • Apply FORMULA B from scalp to ends to tone lightened pieces and refresh remaining hair. • Process for up to 20 minutes or until desired tone is achieved. Rinse, shampoo and condition.

Lightinsider is the perfect product to introduce virgin hair to a brightening service.

• Take a zig-zag section above the parietal ridge. This becomes Section 1; secure in a clip. • Then take a zig-zag section below the parietal ridge, creating Sections 2 & 3. Secure Section 2 & 3 with a clip.

NATURAL LEVEL 3

FORMULA A - One sachet ofLIGHTINSIDER Lightening BoosterPowder, 90g COLORINSIDER 9% (30V)Oil-Cream Developer, and one tubeof LIGHTINSIDER Lightening Conditioning Cream.

FORMULA B - 60g COLOR SYNC 7Mand 60g MATRIX 2.7% (9V) CreamDeveloper

SECTIONING

COLOR STEPS

LIGHTEN-UP

What differentiates LIGHTINSIDER from traditional powder lighters?The non-ammonia cream lightener provides optimum conditioning, can be used on or off scalp, and produces up to 6 levels of lift with steady processing.

Can LIGHTINSIDER be used on the scalp?Yes, LIGHTINSIDER can be used for both on-scalp and off-scalp applications with 3% (10V) or 6% (20V)or 9% (30V) Colorinsider Oil-Cream Developer.

What does ODS stand for?‘ODS’ stands for Oil Delivery System. Unlike traditional lightening systems which are water-based, LIGHTINSIDER contains oil. This oil-rich system maximizes the efficiency of the lightening processby facilitating the delivery of active ingredients into the hair fiber, optimizing their effect.

How does ODS work?LIGHTINSIDER’s Injection ODS utilizes the latest Oil Delivery System (ODS) technology to boost the active lightening ingredients (persulfates, MEA and H2O2) when applied to hair. It ensures improved fiber respect with 27% more conditioning (vs. traditional ammoniated powder lightener), maximizing the effectivenessof the lightening system.

What ALKALI is used?LIGHTINSIDER uses MEA (monoethanolamine) and sodium metasilicate as its alkaline agents and does not use ammonia. MEA is a common alkaline agent that can be found in some permanent haircolors.

Can LIGHTINSIDER be used with any developer?No. LIGHTINSIDER is an ODS lightening system has its own designated developer and has been formulated specifically for use with COLORINSIDER Oil-Cream Developer.

Can LIGHTINSIDER be used with different strengths of Oil-Cream Developer?Yes, LIGHTINSIDER is designed to be used with different strengths of Colorinsider Oil-Cream Developer. The desired lift will determine the strength used 3% (10V) or 6% (20V) or 9% (30V).

How is LIGHTINSIDER mixed?1 sachet (27g powder) + 1 tube (30g cream) + 90ml of Colorinsider Oil-Cream Developer; one box = one application Shake powder sachet to loosen contents. Open sachet and carefully pour entire contents (27g) into a non-metallic bowl Slowly add 3% (10V), 6% (20V) or 9% (30V) Colorinsider Oil-Cream Developer. Mix until blended. Add tube (30 g) of Lightening Cream and mix again.

Do all the three components need to be used with the LIGHTINSIDER system?Yes, LIGHTINSIDER has a unique mixing formula and all three components are required to achievean optimum result.

Is a precise application important with LIGHTINSIDER?As with any decolorizing service, it is recommended to use fine sections for optimal results.Finer sub-sections along with a precise application will provide lighter, more even results.

Can LIGHTINSIDER be mixed with Colorinsider?No. LIGHTINSIDER cannot be mixed with Colorinsider or any other haircolor.

Q & A

Should application be done on wet or dry hair?LIGHTINSIDER must be applied to dry hair only. Water on the hair reduces the effectiveness of the ODS system. Results cannot be guaranteed on damp hair.

Can heat be used for processing?No. LIGHTINSIDER has been developed to work at room temperature for up to 50 minutes. Do not use heat.

Who is the LIGHTINSIDER client?The LIGHTINSIDER client wants best-in-class lightening system, a comfortable odor-free salon experience, and conditioned, shiny results. It is perfect for those clients being introduced to a lightening process for the first time. It is also a good option for over-processed, fragile fine hair, and on different textures of hair.

I would like to tone the hair after lightening. Can I do this with COLOR SYNC?Yes, once the desired level is reached, rinse the LIGHTINSIDER thoroughly, shampoo and towel-dry.Tone the hair with chosen Color Sync formula as directed.

TONING WITH COLOR SYNC

NOTE: all formulas are mixed equal parts

WHITE CRYSTAL Pale Yellow SPN & SPV

ICY DIAMOND Pale Yellow - Yellow SPV & SPA

RESULT

Levels of Lift

Processing time

Heat usage

On/Off scalp

Conditioning

Formula technology

System parts

# of skus

Toning

Services

Up to 8

Up to 50min

NO

On & Off scalp

+

Ammoniated

2

1 + developer

NO

Basic - addresses key salon usages.Excellent for fast on or off scalp

lightening when maximum lifting is desired with minimal conditioning.

Up to 6

Up to 50min

NO

On & Off scalp

+++

No Ammonia / ODS

3

1 + ODS developer

NO

Specialty - Excellent for on-scalpapplications due to increased

conditioning. Excellent for off-scalpservices, such as a Colorinsider single

process application between foils.

Up to 6

2 to 10min / up to 50min (no heat)

YES

Off scalp only

++

Ammoniated

3

7 or 8

YES

Specialty - Excellent for off-scalp,fast highlights that do not require

additional toning.

CHAMPION OF FUNCTIONAL LIFT SPEED & TONING CONDITIONING

PRELIGHTEN TO FORMULA

VANILLA Pale Yellow - Yellow 10WN & 10N

CARAMEL Yellow - Gold 8G & 8BC

CHILLED LATTE Yellow - Gold 8P & 8M

GINGER TANGERINE Gold - Dark Orange 6BC & 8CG

WALNUT Gold - Dark Orange 7N & 7AG

POMEGRANATE Dark Orange - Red Orange 6RC & 7R

RED VELVET Red Orange - Red 6BR & 6M

SABLE BROWN Red - Dark Red Brown 4A & 5N

MATRIX LIGHTENERS GEOGRAPHY

COLOR SYNC FAVORITE FORMULAS

I M A G I N E A L L Y O U C A N B E