bay window gazebo assembly and instructions manual

Date of Purchase:

Receipt of Purchase:

Attach Here

______/____/___________/____/_____

OWNER'S MANUALProduct Code: D71 M80436UPC Code: 8-2484908510-9

CAUTION:Carefully Read Instructions and Procedures for Safe Operation

See our extensive assortment of outdoor living productson-line at www.sears.com and www.kmart.com

BAY WINDOW GAZEBO

http://www.garden-lawnmower.com/10x10-replacement-gazebo-canopy/

Warning:

1. When assembling and using this product, basic safety precautions should always be followed

to reduce the risk of personal injury and damage to equipment. Please read all instructions

before assembly and use.

2. Some parts may contain sharp edges, wear protective gloves if necessary. At least four or more

people are recommended for safe assembly.

3. Keep all children and pets away from assembly area.

4. Begin assembly not less than 6 feet from any obstruction such as fence, garage, house,

overhanging branches, laundry line or electrical wires.

5. Install on level ground. This gazebo cannot be permanently staked or attached to concrete floor

or platform. This gazebo is intended for decorative and sunshade purposes only and is not meant

to withstand inclement weather including high winds, rain and snow. Gazebo fabric is water

resistant, not water proof and may leak during exposure to precipitation.

6. Check all nuts and bolts for tightness before and during usage.

7. Keep all flame and heat sources away from this gazebo fabric. This gazebo is made with fabric

that meets CPAI-84 specifications for flame resistance. It is not fire proof. The fabric will burn if left

in continuous contact with any flame source. The application of any foreign substance to the gazebo

fabric may render the flame-resistant properties ineffective.

P1

GAZEBO PARTS LIST

P2

NO PART DESCRIPTION

A

B1

B2

C1

C2

E

F

G1

G2

H1

H2

J

K1

K2

N

QTY

4

4

4

2

2

1

4

4

4

2

2

1

1

1

1

Big screen

Left Screen

Right Screen

Long Bar

Short Bar

Larger Roof Connector

Top Roof Supporter

Corner Supporting Bar-Long

Corner Supporting Bar-Short

Side Supporting Bar-Long

Side Supporting Bar-Short

Center Hook

Larger Canopy

Top Canopy

Mosquito Netting

Gazebo Replacement Canopy



HARDWARE PACK

SPARE HARDWARE PACK

P3

NO PART DESCRIPTION QTY

AA

BB

CC

DD

EE

16

20

36

8

48

WW

M6×25mm Screw

M6×20mm Screw

M6 Washer

Stake

Plastic ring for

mosquito netting

Plastic ring for

mosquito netting

M6 Wrench 1

NO PART DESCRIPTION QTY

AA

BB

CC

EE

2

4

6

4

3

1

M6×25mm Screw

M6×20mm Screw

M6 Washer

Snap link

Touch up paint

Assembly Tools Required: a ladder and a hammer (not provided)




BAY WINDOW GAZEBO ASSEMBLY INSTRUCTION

P4

Fig. 1

Fig. 1-1 Fig. 1-2

B2

B2

B2

B2A

A

B1

B1

B1

B1

C1

C1C2

C2

B1

A

AA CC

AA CC

Fig. 1-3

B1

or B2

CC

C1

BB

A B1

Step: 1

Fig. 1-1 & Fig. 1-2, Screens setup: Insert the Left Screen (B1) into the Big Screen (A), pull it down to

fix them; then use AA, CC to secure B1 & A; repeat the same process for B2 & A attachment. Don’t

tighten the screws completely at this time.

Fig. 1-3, Frame setup: Connect the Long Bar (C1) and the assembled screens with Screw (BB) and

Washer (CC); repeat the same process for Short Bars (C2) and the Screens, until you get the

complete frame setup as shown in Fig. 1. Don’t tighten any of the screws completely at this time.




P5

Fig. 2

Fig. 2-1 Fig. 2-2 Fig. 2-3

Fig. 2-7

Fig. 2-6

Fig. 2-5

Fig. 2-4

Step: 2

Fig. 2-1: Screw Center Hook (J) into the Larger Roof Connector (E) and secure properly.

Fig. 2-2: Connect Top Roof Supporter (F) with Larger Roof Connector (E). Attention here: the end of

Label “ F” affixed on Larger Roof Connector (E) is used to assemble F.

Fig. 2-3 & 2-4: A ladder is needed for this step--- When placing Larger Roof Connector (E), please

make sure that, the middle connecting end of E labeled with “ H2” should be directed to Long Bar

(C1); while the part labeled with the logo “ H1” be directed to Short Bar (C2). Connect one end of

the Corner Supporting Bar (G1&G2) and Top Roof Supporter (F), and fix the other end of (G1&G2)

with Big Screen (A).

Fig. 2- 5 & 2-6: Connect one end of Side Supporting Bar (Long) (H1) and Larger Roof Connector (E),

and secure the other end of (H1) to the Short Bar (C2) with Screws (BB) and Washers (CC).

Fig. 2-7: Do the same for Side Supporting Bar (short) (H2) and Larger Roof Connector (E), then fix

them with Long Bar (C1) using (BB) and (CC), to complete top frame assembly.

E

E

J

FF

G1

F

G2

G1

G1

G1

C2

BB

CC

BB

CC

C1

H1

H1

H2

D2

D2

E

G2

C1

C2

B1B2

A

G2

G2 G2

AB1

G1

C2

H1

H2

C1

C1

B1B2A






P6

Fig. 3

2-3.giF1-3.giF

4-3.giF3-3.giF

Step: 3

Fig. 3-1: Put Larger Canopy (K1) on to the top frame. Don’t unfold it completely at this time.

Fig. 3-2: Put on Top Canopy (K2) to Top Roof Supporter (F); tie the netting of Top canopy together

with the straps on Larger Canopy (K1).

Unfold Larger Canopy completely, and attach the hooks on the canopy to the holes in screens.

Put the gazebo in a correct position/direction; tighten all the screws with Wrench (WW) properly.

Fig. 3-3: Attach Mosquito netting (N) onto Screen (A B1, B2) and Long and Short bar (C1&C2)

with Plastic Rings (EE). Pay attention to the difference of two sides with different length.

Fig. 3-4: Secure the completely assembled product on the ground with Stake (DD).

K2

K1

K1

K1

DD DD

K2

N

EE

N

A,B1,B2,C1,C2






P7

Care & Maintenance

Our steel components for garden accessories and furniture are treated with rust inhibiting paint that

protects it from rusting. However, due to the nature of steel, surface oxidation (rusting) will occur once

these protective coatings are scratched. This is a natural process and is not a defect! To minimize this

condition, we recommend care when assembling & handling the product to prevent scratching the paint.

Should any scratching or damage occur, we recommend immediate touch-up with rust inhibiting paint,

which is included in the package. Surface rust can also be easily removed with a very light application

of common cooking oil. If surface oxidation (rusting) occurs and if no measure is taken to prevent this,

the oxidation may start dripping on to deck or patio and cause damaging stains, which may be difficult

to remove. This can be prevented if the measure is taken to keep the product from oxidizing.

Limited Warranty

The item is warranted to be free from defects in material or workmanship for a period of 6 months.

However, we don't reimburse for transportation or delivery costs, or compensate the individual or any

outside party for assembling or disassembling the product.

This limited warranty is extended to the original purchaser and applies to defects in materials and

workmanship of your item, provided the item is maintained with care and used only for personal,

residential purposes.

Exclusions

Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts

of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware

is not covered. Proof of purchase (dated register receipt) is required for warranty claims. Warranty is

to the original purchaser and is non-transferable. Any replacement of warranted items will be in the

original style and color, or a similar style and color if the original is unavailable or has been discontinued.

As some states do not allow exclusions or limitations on an implied warranty, the above exclusions and

limitations may not apply. This warranty gives you specific rights, and you may also have other rights,

which vary from state to state.

Important

Please do not return this product to the store. For technical assistance on assembly or replacement parts,

call Sunjoy Industries at (866) 578-6569 from 8:30 AM to 5:30 PM EST Monday to Friday, for expedited

replacement parts order, fax the attached completed customer service replacement form to

1-740-283-3549, or send email to [email protected] for assistance.

Made in China





bay window gazebo assembly and instructions manual

Documents