bblades - o.e.m replacementlades - o.e.m replacement

Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT

B B

345-005 1704100 16-1/8 3/4 13/32 2-9/16 2 .203

(3) for 44” cut, small frame garden tractor 1989 and later.

335-044 1737228BZ1737228BZYP

16-1/8 .795 none none 2-1/2 .204

(3) for 46” cut. Found on Simplicity, Massey Ferguson. Fits on Massey Ferguson models: 130 and 2523.

335-045 1737252 18-1/2 .795 none none 2-1/2 .204

(3) for 52” cut. Found on Simplicity, Massey Ferguson. Fits on Massey Ferguson models: MF2523, MF355X, MRZT26520.

335-198 1737816BM1737816BMYP

21-3/16 .798 none none 2-1/4 .170

(2) for 42″ cut.

330-032 1758878BMYP 21-5/16 13/16 none none 2 .204

(2) for 42” cut. Fits BRIGGS and STRATTON / MURRAY, SIMPLICITY and SNAPPER mowers. Found on Simplicity Courier Zero Turn Riders, 23 Hp with 42” Fab decks. Fits 42” Fabricated Deck, 360Z Model No. 2691317.

360-914 17592621759262BMYP

21-5/16 13/16 none none 2-1/2 .204

(2) for 42” cut, Shark Tooth mulching blade. Fits Snapper 42” Fabricated Deck, 360Z Model No. 2691317.

MAXIM - see ARIENSMTD - also see CUB CADET

335-729 742-0252942-0252

6-7/16 3/8 none none 1-1/2 .090

(1) 335-729 and (2) 335-737 for 44″ cut, side discharge models also found on WHITE & YARDMAN Tractors.

335-798 742-0539942-0539

12-1/2 1-1/2 29/64 2-1/2 3-1/2 .125

Cross blade, (2) 335-798 and (2) 335-790 for 38″ cut, or (2) 335-798 and (2) 335-782 for 42″ cut

335-533 942-0543 753-0571 742-0543

14-13/16 6 pointstar (11/16)

5/16 2-1/2 3 .125

(1) 335-533 & (2) 335-525 for 46” cut, replaces star centre hole, Centre blade for 600 & 800 series, 1996 & earlier

335-125 742-0486942-0486 / A

14-13/16 13/32 5/16 2-1/2 3 .150

(1) 335-125 and (2) 335-117 for 46″ cut, side discharge.

335-449 742-0645 942-0645

14-7/8 6 pointstar (5/8)

5/16 2-1/2 3 .125

(1) 335-449 and (2) 335-455 for 46″ cut, replaces star centre hole, Centre blade for 600 & 800 series built since 1997

360-607 see above 14-7/8 6 pointstar (5/8)

none none 2-1/2 .187

(1) 360-607 and (2) 360-609 for 46″ cut, Shark tooth mulching blade.

MASSEY FERGUSON - also see SIMPLICITY & SNAPPER

09-01


B B

335-453 742-0612942-0612

14-7/8 6 point star (5/8)

3/8 2-1/2 2-1/2 .149

759-04106(1) 335-453 and (2) 335-452 for 46” cut - star center hole, CENTER blade. Fits CUB CADET, MTD, TORO, TROY BILT etc. 3 in 1 mulching blade.

325-884 742-04124 942-04124

14-7/8 6 point star (5/8)

3/8 2-1/2 2-1/2 .203

(1) 325-884 and (2) 325-885 for 46” cut. Heavy Duty Blade. Centre blade.Fits LT1046 and i1046 series mowers. For star hole replacement blade.



(1) 360-607 and (2) 360-609 for 46″ cut, Shark tooth mulching blade.

335-547 742-0118942-0118

15-5/16 13/32 5/16 2-1/2 2 .134

(2) for 30″ cut, Side discharge models 390, 395, 425, 430, 434, 435, 460, 138-390A, 138-395A, W7-C392-B

335-117 742-0477 742-0480

16-1/4 13/32 5/16 2-1/2 3 .149

742-0487 / 942-0480 / 942-0487A(2) 335-117 for 32″ cut, or (2) 335-117 and (1) 335-125 for 46” cut. Side discharge

For “MTD” star center hole applications - please see page 09-06335-455 742-0644

942-064416-1/4 6 point

star (5/8)5/16 2-1/2 3 .125

(2) 335-455 & (1) 335-449 for 46″ cut, replaces star centre hole, outside blades for 600 & 800 series built since 1997.



(2) 360-609 and (1) 360-607 for 46″ cut, Shark Tooth Mulching Blade.

335-525 742-0542753-0571942-0542

16-1/4 6 pointstar (11/16)

5/16 2-1/2 3 .125

(2) 335-525 & (1) 335-533 for 46” cut, replaces star centre hole, Outside blades for 600 & 800 series, 1996 & earlier, held on with bolt.

335-452 742-0611942-0611 / A

16-1/4 6 pointstar (5/8)

3/8 2-1/2 2-1/2 .150

(2) 335-452 and (1) 335-453 for 46″ cut - star centre hole. Outside blade, 3 in 1 mulching blade, 1999 & after. Fits auto drive step through tractors.

325-885 742-04125942-04125

16-1/4 6 pointstar (5/8)

3/8 2-1/2 2-1/2 .203

742-04043(2) 325-885 and (1) 325-884 for 46” cut. Heavy Duty Blade. Outer / Side blades.Fits LT1046 and i1046 series mowers. For star hole replacement blade.



(2) 360-609 and (1) 360-607 for 46″ cut, Shark Tooth Mulching Blade.

MTD continued - also see CUB CADET

09-02


B B

335-554 742-0120 / B942-0120 / B

17-1/4 3/8 5/16 2-1/2 2 .150

(2) for 34″ cut, For side discharge models 440, 445, 455, 460, 465, 466, 470, 472, 475, 480, 485, 488, 620, 621, 752, 138-460A, 138-462A, 138-465A and W7-BG-262B.

335-451 742-0623942-0623

17-1/4 6 pointstar (5/8)

5/16 2-1/2 2-1/2 .187

(3) for 50″ cut, star centre hole. Mulching blade for deep deck riding mowers, 1998 and after.

325-500 742-05052A942-05052A

17-1/4 6 pointstar (5/8)

3/8 3 2-1/2 .150

(3) for 50” cut, star centre hole. Mulching blade / 2-in-1 blade. Side discharges and mulches. Fits 50” Lawn Tractor and RZT Mowers, 2015 and after. Also fi ts Massey Ferguson MF50-22ZT, Rover RZT-50.

325-510 742-04053 742-04053A 742-04053B

17-7/8 6 pointstar (5/8)


942-04053 / 942-04053C(3) for 50” cut - Standard Duty blade. Fits 50” cut models: LT1050 and RZT50 series.

325-507 742-04053A742-04053B 742-04053C

17-7/8 6 pointstar (5/8)


942-04053A / 942-04053B / 942-04053C / 742-04053C0637(3) for 50” cut - Heavy Duty blade. Fits CUB models: RZT50, RZT50, 13AF91AP010, 13AP11CP709, 13AP11CP710, 13AP11CP756, 13AP91AP010, 13AP91AP056, 13AQ11BP010, 13AQ11BP710, 13AQ11BP756, 13AQ11CP009, 13AQ11CP010, 13AQ11CP056, 13AQ11CP256, 13AQ11CP709, 13AQ11CP710, 13AQ11CP712, 13AQ91AP010, 13AQ92AP; Fits MTD models: RZT-50, 13AA625P004, 13AA625P004, 13AA625P304, 13AA625P372, 13AA625P719, 13AA925P004, 13AP615P755, 13AP925P004, 13AR91PP099, 13AR91PP099, 13AU615P755, 17AC2ACG055, 17AE2ACG004, 17AF2ACP001, 17AF2ACP004, 17AF2ACP004, 19A70000.

325-511 742-04056742-04056A

17-7/8 6 pointstar (5/8)

3/8 3 2-1/2 .149

742-04056A-0637742-04056B / 742-04056C / 942-04056 / 942-04056A

(3) for 50” cut - Super High Lift blade. Found on Cub Cadet and Toro models with 50” cut decks.


none none 2-1/2” .187

(3) for 50” cut, Shark Tooth Mulching blade.

335-562 742-0121 / B942-0121 / B

18 3/8 5/16 2-1/2 2 .150

(2) for 36” cut and 18” cut push mowers with side discharge. (While Quantities Last)

335-448 742-0738942-0738

18 15/16 X11/16

5/16 2-1/2 2-1/4 .134

Fits 18″ walk behinds. Mulching blade for MTD deck 1995 and older. Fits bowtie centre hole

335-446 742-0743942-0743

18 15/16X 11/16

5/16 2-1/2 1-3/4 .125

Fits 18″ walk behinds. Mulching blade for MTD battery operated walk behinds. FITS MTD BOW TIE HUB (W.Q.L.)

MTD Six Star Spindle.We are stocking two types of replacement

blades for the “MTD Six Star Spindles”.Both the “Y” and “H” (double diamond) hole patterns will fi t securely onto the MTD 6 point star spindles.


09-03


B B

335-170 742-0496942-0496

18-3/16 13/32 5/16 2-1/2 3 .150

(2) for 36″ cut. High lift blade for deep deck models 1989 and after.

335-475 742-0677 742-0677A / B

18-1/2 6 pointstar (5/8)

5/16 2-1/2 3 .204

942-0677A / B(3) for 54” cut. Fits CUB CADET models: GTX1054, GT1054, GT1554, GT1554VT, 13AK11BK009, 13AK11BK010, 13AK92AK010, 13VR92AK009, 13WK92AK009, 13WK92AK010, 13WK92AK056, 13WR92AK010, 13WZ92AK010, 13YZ92AK010, 13YZ92AK056, 14AK13BK009, 14AK13BK010, 14AK13BK056, 14AK13BK256, 14AK13CK010, 14AK94AK010; Fits MTD models: 14AP805K730, 14AR808K131, 14AR808K131, 14AR814K401, 14AZ814K401, 14AZ814K401, 14AZ814K701; Fits TORO models: GT2300, 14AK81RK544, 14AK81RK544, 14AK81RK744, 14AK81RK744; Fits TROY BILT models: KT740-3011, 17ARCACK011. (Replaces MTD / Troy Bilt #’s 742-0678 / 942-0678. (Note: You need to order 3 blades to make a set). (Found on MTD rider model# 14AA945K004).

360-608 see above 18-1/2″ 6 pointstar (5/8)

5/16 2-1/2″ 3 .203

(3) for 54″ cut. Shark Tooth Mulching Blade. Fits 1500 Tractors and RZT’s with 54” decks.

325-501 742-05056742-05056A942-05056A

18-5/8 6 pointstar (5/8)

3/8 3 2-1/2 .150

(3) for 54” cut, star centre hole. Mulching blade / 2-in-1 blade. Blade for 54” Cub Cadet Fabricated Deck RZT. Fits 2013-Up Cub Cadet RZT 54” Zero Turn Mowers and 2015-Up Cub Cadet XT1-2 series tractors with 54” Deck.

335-570 742-0122942-0122

19 3/8 5/16 2-1/2 2 .150

(2) for 38″ cut. For side discharge models 476, 487, 490, 493, 494, 495, 496, 497,497F, 497P, 498, 628, 698, 720, 760, 765, S/D, 138-495A, 138-497A and W7-BG-497, etc.

335-447 742-0739 942-0739

19 Bow Tie 5/16 2-1/2 2-1/4 .125

Fits 19” walk behinds. Fits bowtie centre hole. Fits CUB CADET models: CC189, CC500 and CC550ES, and CC550SP, 19” walk behind and MTD / YARDMAN 19” walk behind; 11A-18M9002 (2010 and 2011), 11A-18MZ202 (2010 and 2011), 12A-18M7002 (2010 and 2011) and 12AE-18JA002 (2010 and 2011).

335-430 742-0675942-0675

19-1/4 6 pointstar (5/8)

5/16 2-1/2 2-1/4 .164

742-04084 / 942-04084 / 742-0675-637 / 942-0675-637(2) for 38” cut, with star center hole, low lift blade. Fits 38” cut Cub Cadet / MTD 700 series mowers.

335-610 742-0610942-0610

19-5/16 6 pointstar (5/8)

none none 3 .149

(2) for 38” cut, with star center hole. Fits MTD models: CLT38G 13A277KF897, LT3812, LT3812 13BC77KF897, LT538G 13AC77GF897,LT542H 13AN79GS897, 13AA472F190 L-13, 13AA662F190 LT-13, 13AA672F190 LT-13, 13AA673F190 LT-13, 13AA683F190 LT-1300, 13AC76GF897, 13AC76LF031, 13AC76LF055, 13AC76LF058, 13AC762F000, 13AC762.

335-549 742-0610942-0610

19-5/16 6 pointstar (5/8)


(2) for 38” cut, star center hole, 3 in 1 mulching blade, deep deck - 1992 and after. (Found on MTD rider model# 13AC762F000, 13AC762F065, 13AC76LF031, 13AC76LF055).


5/16 2-1/2 2-3/4 .149

(2) for 38″ cut, Shark Tooth mulching blade.


09-04


B B

335-877 742-0473A942-0473A

19-3/8 13/32 5/16 2-1/2 3 .149

742-0322 / 742-0472 / 742-0493 / 942-0493(2) for 38” cut. Fits MTD models: Lawn Groom Mdl 130-650F133, MTD Mdl 130-452F134/485-209, MTD Mdl 130-650F136/403436, 111-508R013, 130-432-000, 130-432E016, 130-433-000, 130-434-000, 130-435-000, 130-436-000, 130-437-000, 130-438-000, 130-439-000, 130-440-000, 130-441-000, 130-442-000.

335-493 742-0493942-0493

19-3/8 13/32 5/16 2-1/2 3 .149

(2) for 38″ cut, sand blade, deep deck - 1986 thru 1996.

335-790 742-0537942-0537

19-3/8 13/32 7/16 2-1/2 3 .149

(2) 335-790 and (2) 335-798 for 38″ cut, Mulching blade, side discharge, deep deck - 1992 and after.Fits MTD models: 134D694G401, 134E660F301, 134E661F000, 134E661F147, 134E667F302, 134G660G119, 134G660G302, 134G660G352, 134G670G000, 134G670G009, 134G670G147, 134G690G088, 134H607F205, 134H660F000, 134H660F134, 134H667F372, 134H670F016, 134I600F000, 134I660F054, 134I665F3

335-745 742-0220942-0220

20 3/4 3/8 2-1/2 2 .150

20″ cut used with models with blade brake clutch, 1984 thru 1986. (While Quantities Last)

335-943 742-0520 742-0620

20 13/16 (.822)

3/8 2-1/2 2 .150

942-0520 / 942-062020″ cut walk behind zone start models - 1984 thru 1986.

335-001 742-0620942-0620

20 13/16 (.822)

3/8 2-1/2 2-1/4 .134

20″ cut, mulching blade for walk behind mowers with splined shaft.

335-010 742-0500 942-0500

20 13/16 (.822)

3/8 2-1/2 2-1/4 .125

942-072020″ cut, mulching blade for 090 series mowers, 1996 and before. (While Quantities Last)

335-720 742-0500 742-0720

20 13/16 (.822)

3/8 2-1/2 2-1/4 .134

942-0500 / 942-072020″ cut, mulching blade for walk behind mowers w/ splined shaft - 1993 & after, models 070, 080, 090, 100, 200 & 700. (While Quantities Last)

335-439 742-0640942-0640

20 Bow Tie 5/16 2-1/2 2-1/4 .125

Fits 20” walk behinds. High lift blade for walk behind mowers, 1997 and older. Fits bowtie centre hole.Fits MTD models: 08P502-0055-F1, 1T65NU, 11A-AOS5706, 11A-A1S5706, 11A-02BT706, 11A-02BT706, 11A-02JV000, 11A-02JV006, 11A-02JX700, 11A-02JX706, 11A-02MG000, 11A-02MG029, 11A-02SB700, 11A-02SB706, 11A-02SB706, 11A-020B000, 11A-020B000 SD-30, 11A-020B006, 11A-020B029, 11A-0

335-438 742-0740 942-0740

20 Bow Tie 5/16 2-1/2 2-1/4 .125

Fits 20″ walk behinds. Mulching blade for walk behind mowers, 1997 and older. Fits bowtie centre hole.Fits MTD models: 11A-072A000, 11A-072A022, 11A-072A132, 11A-074A141, 11A-104B090, 11A-104K290, 11A-105A790 W-105, 11A-105D790, 11A-106F190 LC-106, 11A-109Q597, 11A-109Q897, 11A-702A190 LC-40, 11A-704A190 LC-40, 11B-106F190 LC-106, 11B-108C190 LC-106, 11B-109B190 LC-106, 11.


09-05


B B

335-608 742-0608942-0608942-0608C

20-23/64 27/64 21/64 2-1/2 2 .150

(1) 335-608 and (1) 335-607 for 42″ cut decks. Left hand cut blade. Fits MTD model: 135O765N013

335-607 742-0607942-0607942-0607C

20-23/64 27/64 21/64 2-1/2 2 .150

(1) 335-607 and (1) 335-608 for 42″ cut decks. Right hand cut. Fits MTD model: 135O765N013

335-002 742-0521 742-0621

20-15/16 13/16 (.822)

3/8 2-1/2 2-1/4 .134

942-0521 / 942-0621Fits 21″ cut, rear bagger models 312R, 313R, 315R, 488, 828 and 848 with splined shaft.

335-814 742-0563942-0563

20-15/16 13/16 (.822)

3/8 2-1/2 2-1/4 .125

742-0721 / 942-072121″ cut, mulching blade, walk behind mower, models 312R, 313R, 315R, 488, 828, 848, 100,400,500,800, 1993 & after.

335-596 742-0124 942-0124B

21 3/8 5/16 2-1/2 2 .150

21″ cut, side discharge, fi ts models 118-620A, W7-BG620-B, 128-290A self propelled, W7-BG-290 SP-B self propelled. (While Quantities Last)

335-935 742-0306A 742-0490 742-0521

21 13/16 (.822)

3/8 2-1/2 2-1/2 .187

742-0621A / 942-0306 / 942-0621A21″ cut, self propelled, fi ts models 816R, 818R and 462R thru 479R, rear bagger.

335-450 742-0641942-0641

21 Bow Tie 5/16 2-1/2 2-1/4 .134

Fits 21″ walk behinds. High lift balde for MTD deck 1997 and newer. Fits bowtie centre hole. (4 point star)Fits MTD models: 11A-41K3001, 11A-414A020, 11A-414A065, 11A-414E000, 11A-414E029,11A-414R229, 11A-414S220. 11A-414S265, 11A-42K6095, 11A-422Q713, 11A-439Q597, 11A-549Q597, 11A-549Q897

335-741 742-0741 942-0741

21 Bow Tie 5/16 2-1/2 2-1/4 .134

Fits 21” walk behinds. Mulching blade for MTD deck 1995 and newer. Fits bowtie centre hole. (4 point star). (Found on MTD push mower model#s 11A-414A020, -414A065, -414E000, -414E029, -41M9001, -436A004, -544A000, -544A020-544A059, -544F004, -54M7001, -54M7031, -A18M055, -A24T055, -A26M011, -B16M029, -B29Q711 and Self Propelled mower model#s 12A-464T020-A26M011, 12AE46JA001, 12AEA29L011, 12AG469D059, 12AI832Q711, 12AI869F011, 12AV566A004, 12AV566A059, 12AV56K3095, 12AVA29Q711, 12AVB26M011).

360-105 see above 21 Bow Tie 5/16 2-1/2 3 .149

Fits 21” walk behinds. Shark Tooth Mulching blade. Fits bowtie centre hole. (4 point star). For MTD deck 1995 and newer.

335-432 742-0674942-0674

21-1/16 6 pointstar (5/8)

5/16 2-1/2 2-1/4 .164

742-0674-637 / 942-0674-637

(2) for 42” cut, with star center hole, low lift blade. Fits 42” cut Cub Cadet / MTD 700 series mowers.


09-06


B B

335-617 742-04308 742-04312

21-3/16 6 pointstar (5/8)

5/16 2-1/2 2-3/4 .149

742-0656 / 942-0656942-04308 / 942-04312 / 490-110-M108

(2) for 42″ cut, High Lift blade, star center hole, deep deck 1997 and after, auto drive 1999 and after.

335-621 742-04308 742-04312

21-3/16 6 pointstar (5/8)

5/16 2-1/2 2-1/4 .187

942-04308 / 942-04312(2) for 42″ cut, Heavy Duty blade, star center hole. Fits 2010 and newer MTD 42” tractor mower decks and 2010 and newer Toro LX lawn tractors with 42” mower deck. NOTE: DOES NOT FIT ON 2009 and older MTD tractor models or Toro 2009 and older LX / GT series lawn tractors. Fits MTD models: 13AJ775S000, 13AN772S000, 13AX771S004, 13AX771S004, 13AX795S004, 17AFSACS004; Fits TROY BILT models: 13AN77KS011, 13AX78KS011, 13AX78KS066, 13WN77KS011, 13WX78KS011, 13WX78KS211, 17BDCACK066; Fits YARDMAN models: 13AN795S001, 13AO772S055.

335-616 742-0616942-0616

21-3/16 6 pointstar (5/8)

none none 3 .149

742-04087 / 942-04087(2) for 42″ cut, star centre hole.Fits MTD models: 13AD604G401, 13AD624G401, 13AD674G401, 13AD678G034, 13AD678G300, 13AD698G205, 13AF607G352, 13AF608G062, 13AF660G352, 13AF673G000, 13AF675G062, 13AF678G205, 13AF693G118, 13AF698G300, 13AG619H022, 13AG675G033, 13AG675G196, 13AG675G733, 13AG678G022, 13AG678G7; Fits MURRAY models: 13AM775S058, 13BM772S058, 31R707-0013-G1; Fits TORO models: 13BX60RG744; Fits TROY BILT models: KT725-3012, SV530-3222, 13AM77KS011, 13AV60KG011, 13WV78KS011, 17ARCACS011, 31R707-0001-G1 and Fits YARDMAN models: 13A2785S001, 4P90JUB.

335-551 742-0616 942-0616

21-3/16 6 pointstar (5/8)


742-0616A / 942-0616A490-110-M115

(2) for 42” cut, star center hole, 3 in 1 mulching blade, deep deck - 1997 & after; autodrive 1999 & after. Fits MTD models: 13AD604G401, 13AD624G401, 13AD674G401, 13AD678G034, 13AD678G300, 13AD698G205, 13AF607G352, 13AF608G062, 13AF660G352, 13AF673G000, 13AF675G062, 13AF678G205, 13AF693G118, 13AF698G300, 13AG619H022, 13AG675G033, 13AG675G196, 13AG675G733, 13AG678G022, 13AG678G7. NOTE: also fi ts on newer TORO mowers using the 5 point blade hub, model 13AX60RG744.



(2) for 42″ cut. Shark Tooth mulching blade.

335-503 742-0503942-0503

21-3/16 13/32 5/16 2-1/2 3 .164

(2) for 42″ cut, sand blade

335-067 742-0499 742-0499A

21-3/16 13/32 5/16 2-1/2 3 .149

742-0499A / 942-0499 / 942-0499A(2) for 42″ cut, side discharge deep deck models - 1990 and after.Fits MTD models: Agway Mdl 130-689G019/822-245, Central Park Mdl 131-660G046, Central Park Mdl 131-670G046, Hechinger Mdl 130-673G372/06-426944, Hechinger Mdl 131-660G372/06-449631, Hechinger Mdl 131-689G372/06-449714, Husky Mdl 130-659G131/44-20113, Lawn Hawk Mdl 130-650G

360-622 see above 21-3/16 13/32 5/16 2-1/2 3 .164


335-782 742-0538942-0538

21-3/16 13/32 7/16 2-1/2 3 .149

(2) 335-782 and (2) 335-798 for 42″ cut, high lift for bagging - 1992 and after. (Cross blades on page 09 - 01)


09-07


B B

335-737 742-0295942-0295

22 13/32 5/16 2-1/2 2 .187

(2) 335-737 and (1) 335-729 for 44″ cut - side discharge - 700, 800 series, found on WHITE & YARDMAN tractors.Fits MTD models: Greenbrier Mdl 704, Lawnfl ite Mdl 704-132, Lawnfl ite Mdl 704-327, Lawnfl ite Mdl 714-132, Lawnfl ite Mdl 714-192, Power Tech Mdl 714, Ranch King Mdl 704, 135-704-000, 135-704-009, 135-704-033, 135-704-049, 135-704-190 44” Lawn Tractor LT-140, 135-705-000, 13

335-642 742-0642 / A942-0642 / A

22 15/16 X11/16

5/16 2-1/2 2-1/4 .134

22" cut walk behinds mowers after 1995. Fits bowtie centre hole.Fits MTD models: 11A-030E000, 11A-030F200, 11A-034E000, 11A-034R200, 11A-074E065, 11A-074R265, 11A-08MA029, 11A-08MB000, 11A-08MB006, 11A-08MB031, 11A-08M9006, 11A-084D000, 11A-084E000, 11A-084E020, 11A-084E029, 11A-084R220, 11A-084R229, 11A-422Q713, 11A-504B090, 11A-504K2

335-742 742-0742 942-0742

22 Bow Tie 5/16 2-1/2 2-1/4 .134

22” cut walk behinds. Mulching blade for walk behind mowers. Fits bowtie centre hole.Fits MTD models: 11A-08JC006, 11A-08JC031, 11A-08MB006, 11A-08M9006, 11A-084D000, 11A-084E000, 11A-084E020, 11A-084E029, 11A-084R220, 11A-084R229, 11A-50JC006, 11A-50MB000, 11A-50MB006, 11A-50MB031, 11A-50M9006, 11A-504A597, 11A-504A897, 11A-504B090, 11A-504C000, 11A-504E0 and Self Propelled mower model#s 12A-264A000, 12A-26JC006, 12A-26JC031.

335-497 742-0222942-0222

22 3/4 3/8 2-1/2 2 .150

22″ cut, used on models with blade brake clutch, 1984 thru 1986. (While Quantities Last)

335-950 742-0522742-0622

22 13/16 (.822)

3/8 2-1/2 2 .150

942-0522 / 942-062222″ cut, self propelled mowers with splined shaft.

335-722 742-0722 942-0722

22 13/16 (.822)

3/8 2-1/2 2-1/4 .125

22″ cut, mulching blade for mowers with splined shaft, models 050, 060, 070, 080, 200, 500 - 1993 and after.

335-618 742-04217942-04217

22 6 pointstar (5/8)

none none 3.15 .149

(2) for 42” cut, High Lift blade. 2 in 1 blade for side discharge and bagging.Fits Cub Cadet RZT models: RZT42 with 42” timing deck, 2009 and newer.)

335-470 742-04244 / A742-04290

23-1/4 6 point star (5/8)

none none 3 .149

942-04244942-04244-X / 942-04290

(2) for 46” cut deck on Cub Cadet / MTD series 100, LTX lawn tractors with 46” cut decks, 2009 and after. Models: LTX1045, LTX1046, LTX1046VT and LTX1146. (Found on MTD rider model#s 13AL771T004, 13AL795T004, 13AX791T031, 13AX79KT011, 13AX90YT001, 13AX915T004).

335-468 742-04290942-04290

23-1/4 6 pointstar (5/8)


490-110-C131(2) for 46” cut deck. Heavy Duty blade.For MTD series 100, LTX lawn tractors with 46” cut decks, 2009 and after. Found on model: 13AL771T004, 13AL795T004, 13AX791T031, 13AX79KT011, 13AX90YT001, 13AX915T004.


09-08


B B

MTD continued - also see CUB CADET335-467 942-04244

942-04244A23-1/4 6 point

star (5/8)none none 3-1/8 .149

(2) for 46” cut deck. Super High Lift blade.For MTD series 100, LTX1045, LTX1046, LTX1046VT and LTX1146. lawn tractors with 46” cut decks, 2009 and after.Found on model#s 13AL771T004, 13AL795T004, 13AX791T031, 13AX79KT011, 13AX90YT001, 13AX915T004.

360-107 see above742-04361

23-1/4 6 point star (5/8)

none none 3 .149

742-04361942-04361 / 942-04361-0684

(2) for 46” cut, Shark Tooth Mulching blade. For deck on Cub Cadet / MTD series 100, LTX lawn tractors with 46” cut decks, 2009 and after. Models: LTX1045, LTX1046, LTX1046VT and LTX1146. (Found on MTD rider model#s 13AL771T004, 13AL795T004, 13AX791T031, 13AX79KT011, 13AX90YT001, 13AX915T004).

335-472 742-0760942-0760

24 6 point star (5/8)

5/16 2-1/2 2-1/4 .125

Fits Mini Rider 24” with 60cm Deck.Found on MTD models: 13A4065-382, 13A4065-121, 13A4065-205, 13A4065-705, 13A4065-706 Lawn Tractor.

335-687 742-0132942-0132

24-7/8 3/8 5/16 2-1/2 2-1/2 .187

(2) For 46″ cut, fi ts models 360, 362, 380, 385, 404, 420, 770 and 775 etc. (While Quantities Last)

335-134 742-0156 742-0157

26 13/32 5/16 2-1/2 3 .149

742-0158 / 742-0194 / 742-0255 / 942-0194 / 942-0255AFits 26″ cut models 525, 526 and 527 etc. (While Quantities Last)

335-646 742-0256742-0193

30 3/8 5/16 2-1/2 3 .150

742-0280 / 942-0256A / 942-0193

30″ cut, side discharge models 410, 412, 790, 795, 796, 796, 797, 138-796A, 138-797A and W7-BG796-B - 1990 & after.

335-454 742-0609942-0609942-04058

30 6 point star

21/64 2-1/2 2-3/4 .160

30” cut. Fits MTD side discharge deck, riding mowers 1990 and after. Fits MTD models: 13AL450C000 and 13AL450C700.

MURRAY335-786 024338

024458 15-1/32 7/8 X 1 none none 2-1/4 .150

025119 / 23209HT / 24338E701 24458E701 / 24458HT / 4244588 / 424458S

(3) for 42″ cut, embossed stiff eners, 1976 thru 1980 - 42″ cut, 1984 thru 1990 - 42″ cut. (Uses 405-217 or 400-217 blade adapters)

335-038 92117 92117E70192117E7D 92117E701MA

15-3/4 27/32 (.850)


(3) for 46″ cut, High lift blade - newer models 46901X92A, 1991 thru 1998 all decks.

335-012 92117 92117E701

15-3/4 27/32 (.850)


(3) for 46″ cut, Heavy duty / High lift blade - 1991 thru 1998 all decks

09-09


B B

335-040 65663156631E701

15-3/4 27/32 (.850)


056631E701 /056631E701MA(3) for 46″ cut, Mulching blade - for GT rail frame models, also used on Scotts mower, 3 in 1 blade.

360-700 see above 15-3/4 27/32 (.850)



345-109 1736044AYP 16 1 3/8 2-9/16 2-1/2 .203

(1) 345-109 and (2) 345-110 for 54” cut.Found on MURRAY / SIMPLICITY / SNAPPER models: Conquest, Prestige, Legacy XL; with 20 thru 27 Hp engines.

330-030 1757303YP 16-1/2 13/16 none none 2-1/4 .149

(3) for 48” cut. Fits BRIGGS and STRATTON / MURRAY, SIMPLICITY and SNAPPER mowers.Found on models: MF2500, Regent S, Regent EX, Briggs Hydro and 48 Fabricated mower decks.

335-092 94692 94692E701 094692E701

17-11/16 27/32 (.850)


94692E701MA / 94692853

(3) for 48” and 50” cut. Medium Lift blade. Fits MURRAY LT railframe; 52” rail frame; 52” GT old style.

335-115 02400 020930

18-1/4 7/8 X 1 none none 2-1/4 .149

024116 / 025116 / 054372 / 054390E701MA / 24116E601 / 24116HT / 429305 / 54372E / 54372HT / 54390HT / 54390E701

(2) for 36” cut, High Lift blade, Takes (2) 335-115 and (2) 335-141 (cross blades - W.Q.L.) for 36” cut.

335-810 20930 20930HT 20930E701

18-1/4 7/8 X 1 none none 2-1/4 .149

454390 / 454390MA / 420930 / 54390E701(2) for 36” cut. Fits MURRAY All 36” cut riders with square D center hole. Lawn tractor models 1976 thru 1988.

360-715 see above 18-1/4 7/8 X 1 none none 2-1/4 .187

(2) for 36″ cut, Shark Tooth mulching blade. (While Quantities Last)

335-830 880638YP880638BZYP

19 13/32 13/32 1-7/8 2-1/8 .150

Blade for Murray.

335-121 43865 43865E701 471548

19-3/8 13/32 none none 2-1/4 .134

471548MA / 71548E701MA / 71548 / 71548E701

20″ Mulching blade for models from 1990 thru 1996.

MURRAY continued

09-10


B B

335-008 92003HT 92003E701 92003E701MA

19-1/2 27/32(.850)


(2) for 38″ cut, Sand blade - low lift.

335-182 91742HT91742E701

19-1/2 27/32(.850)


091742EMA(2) for 38″ cut, High lift blade. Fits models from 1989 thru 1996, standard duty blade

335-118 91742HT 91742E701 91742E701MA

19-1/2 27/32(.850)


(2) for 38″ cut, High lift blade, Fits models from 1989 thru 1996, Heavy duty blade

335-021 49510495104E701

19-1/2 27/32(.850)


92543E701 / 09510E701(2) for 38″ cut, Mulching blade, (3 in 1 blade), Also see our 360-712 Shark Tooth Mulcher (W.Q.L)

335-003 5625056250E701056250E701

19-1/2 27/32(.850)


056250E701MA / 56250E701MA(2) for 38″ cut, Mulching blade, 1989 thru 1998 - 3 in 1 blade.

335-760 20045 20045HT 20045E701

19-15/16 13/32 13/32 2-1/2 2-1/4 .150

42785E701MA / 442785 / 442785MA / 42785HT / 42785E7015548MA / 774004

20” cut. Fits MURRAY - Most 20” walk behind decks (1996 and newer).

335-022 672763672763E701671921E701

20 3/8 none none 2-1/4 .150

Fits 20” cut walk-behind mowers. Mulching blade, 3 in 1 blade.

335-024 095103E701 56251E701 92544E701

20-5/16 27/32(.850)


95103853 / 95103E701 (2) for 40″ cut, Mulching blade, 3 in 1 blade

360-719 see above 20-5/16 27/32(.850)


(2) for 40″ cut, Shark Tooth Mulching Blade (NOTE: PRICED INDIVIDUALLY - SOLD ONLY IN MULTIPLES OF 2).

335-030 9200292002HT

20-3/8 27/32(.850)


92002E701 / 092002E701MA(2) for 40″ cut, Sand blade - low lift blade

335-104 456251 56251 56251E701

20-3/8 27/32(.850)


56251E701MA / 056251E701MA(2) for 40” cut, Mulching blade, 1989 thru 1998, 3 in 1 blade.

MURRAY continued

09-11


B B

335-166 91871 91871HT91871E701

20-3/8 27/32(.850)


091871E701MA(2) for 40″ cut, High lift blade for bagging. Models 40603, 40604, 40606, 40620, 40622, 1989 thru 1998.

335-016 91871 91871HT 91871853

20-3/8 27/32(.850)


91871E701 / 91871E701MA

(2) for 40″ cut, High lift blade for bagging. Heavy duty blade.

360-704 see above 20-3/8 27/32(.850)


(2) for 40″ cut, Shark Tooth mulching blade. (While Quantities Last)

345-110 1736043AYP 20-9/16 1 3/8 2-9/16 2-1/2 .203

(2) 345-110 and (1) 345-109 for 54” cut.Found on SIMPLICITY / SNAPPER models: Conquest, Prestige, Legacy XL; with 20 thru 27 Hp engines.

335-234 7100242BZYP 20-3/4 3/8 none none 2-1/2 .149

21” Mulching blade / Wave 21” push mower. Found on Murray 7800268 (BTPV21675E), Replaces obsolete# 7100242AYP.

335-028 672029 672057E701

20-3/4 13/32 none none 2-1/4 .134

71584853 / 71584E701

21″ cut, Mulching blade for walk behind mowers, 3 in 1 blade.

335-007 4383643836E701

20-13/16 13/32 none none 2-1/4 .134

43836HT / 43610HT / 043610E701

21″ cut, walk behind models 21681X5 and 21681X62, 1990 and newer.

335-806 471161 471161MA

20-7/8 13/32 none none 2-3/4 .150

471584 / 71161E70121″ cut, Mulching blade. (While Quantities Last)

335-869 22860 22860HT

20-7/8 13/32 13/32 2-1/2 2-1/4 .150

22860E701 / 22860E701MA / 042739 / 422860

21″ cut, blade for bagging, 1983 thru 1989.

335-019 495100 7769203095100E701

21-1/4 27/32(.850)


095100E701A / 95100E701MA / 5539MA / 721392 / 7769203

(2) for 42” cut, Mulching blade, 3 in 1 blade. Fits MURRAY lawn tractors with 42” decks (1998-2008).

MURRAY continued

09-12


B B

335-020 092419E701 095101E701 92419E701

21-1/4 27/32(.850)


95101E701 / 095101E701MA

(2) for 42″ cut.

335-162 092418E701 492418MA 92418

21-1/4 27/32(.850)


92418E701

(2) for 42″ cut, High lift blade.

335-167 492418 492418MA 492418MA

21-1/4 27/32(.850)


092418E701 / 092418E701 / 095101E701MA 09510E701 / 92418 / 92418E701 / 95101E701

(2) for 42” cut, High lift blade. Heavy duty.

335-005 456252 456252MA 56252

21-1/4 27/32(.850)


56252E701 / 656252853 / 056252E701 / 056252E701MA

(2) for 42″ cut, Mulching blade, 1992 thru 1996, 3 in 1 blade.

360-701 see above 21-1/4 27/32(.850)



330-032 1758878BMYP 21-5/16 13/16 none none 2 .204


360-914 17592621759262BMYP

21-5/16 13/16 none none 2-1/2 .204


335-068 1101823 1101823E701

21-5/8 13/32 13/32 1-7/8 2 .135

7100851 / 1101823E701MA / MU1101823E701MAFits Murray push mowers. 3 in 1 blade.

335-111 20046 20046HT20046E701

21-7/8 13/32 13/32 2-1/2 2-1/4 .150

42225HT / 4225E701MA / 42225 / 42225E70122″ cut, High lift blade.

335-236 7103288YP 22 3/8 13/32 2-1/2 2-1/2 .150

22” Mulching blade for Murray / Snapper push mowers. Found on many Murray / Brute 22” Lawn Mower models.

MURRAY continued

09-13


B B

335-499 1101120E701 672059E701

22 13/32 none none 2-1/4 .149

672735 / 672735E701 / 7111371113E701 / 71499 / 71499E701 / 71584E701 / 71849E701

22″ cut, Mulching blade for walk behind mowers, 3 in 1 blade.

335-116 5405354053E701MA

30 7/8 X 1 none none 2-1/4 .150

24868E701 / 25625 / 54053E701

30″ cut, High lift blade for bagging. (Uses our 405-217 or 400-217 blade adapter) (While Quantities Last)

335-004 56061E701 56061E701MA 56061HT

30 7/8 X 1 none none 2-3/4 .160

30″ cut, High lift blade for bagging. (Uses our 405-217 or 400-217 blade adapter) (While Quantities Last)

335-135 002405 55793HT

30 27/32(.850)


55454HT / 55793E701

30″ cut, Low lift blade.

335-330 5621255969HT56060HT

30 27/32(.850)


56060E701 / 55969E701 / 55969E701MA56212E701 / 56246E701 / 56246E701MA

30″ cut, High lift blade for bagging

335-215 5553MA 5621056217

30 27/32(.850)


56217E701 / 056217E701 / 056217E701MA 30″ cut, Mulching blade. Fits rear engine riders models 2466A and 24661A. 1987 to present, 3 in 1 blade.

360-707 see above 30 27/32(.850)


30″ cut, Shark Tooth mulching blade. (While Quantities Last).

NEW HOLLAND - see FORD & HOMELITE / JACOBSENNOMA - AMF / Canadiana / Dynamark

305-680 9248300323

9-5/8 3/8 none none 2 .134

782972 / 00782972

(1) 305-680 and (2) 305-649 for 45″ cut, high lift.

305-623 317071 309573

16-1/8 3/8 none none 2 .134

302329 / 309571 / 317071 / 327557

(2) for 32” cut. (3) for 46” cut, High Lift blade. (NOTE: PRICED INDIVIDUALLY - SOLD ONLY IN MULTIPLES OF 2). (W.Q.L)

MURRAY continued

09-14


B B

305-524 868556821

18-1/8 3/8 none none 2 .140

54884 / 39311 / 782965 / 00782965

(2) for 36″ cut, low lift blade.

305-649 58212306931

18-1/8 3/8 none none 2 .134

(2) for 36″ cut, High Lift blade or (2) 305-649 and (1) 305-680 for 45″ cut.

305-599 57299309069

19-11/16 3/8 none none 2 .134

76860 / 031039

(2) for 39″ cut, Low lift blade, found on Lawn Chief tractors.

305-631 58190306932

19-11/16 3/8 none none 2 .134

(2) for 39″ cut, Super High Lift blade, found on Lawn Chief tractors.NOTE: For Mulching blade see our 305-633 W.Q.L. on-line, replaces Noma# 330425, 326160 and 76660.

305-277 330277 20-1/4 3/8 none none 2 .187

20″ cut, Mulching blade for K-Mart models. (While Quantities Last)

305-708 309070303065

20-5/16 3/8 none none 2 .134

(2) for 40” cut, Super High Lift blade. Fits models A4016-030. NOTE: Will replace Noma / Canadian / Dymamark blade number 313316 - if the mower deck is equipped with the newer style quill / spindle assemblies that have the cut outs in the saddle to allow for our 305-708 blade.

305-023 330278325762

21-5/8 3/8 none none 2 .187

(2) for 43″ cut, Mulching blade, 3 in 1 blade. (While Quantities Last)

305-700 31660831395413954

21-3/4 3/8 none none 2 .134

(2) for 42″ and 43″ cut, High Lift blade.

305-468 325751 29-7/8 1/2 28/64X

15/16

2-11/16 2-3/4 .187

30″ cut

POULAN PRO / JONSEREDS - see HUSQVARNA & AYPPOWER KING - see ECONOMY / POWER KINGPRO STAR - see DIXIE CHOPPER

NOMA - AMF / Canadiana / Dynamark continued

09-15


B B

315-800 522360 23 1 9/16 6-1/2 2-1/2 .312

(3) for 65” cut, High Lift blade. Fits PROGRESSIVE TURF model: SDR-65. Note: Replaces Progressive Turf # 522360

315-801 522364 24 1 9/16 6-1/2 2-1/2 .312

(4) for 90” cut, High Lift blade. Fits PROGRESSIVE TURF model: SDR-90. Note: Replaces Progressive Turf# 522364

315-803 522376 32 1 9/16 10 2-1/2 .312

High Lift / Heavy Duty blade.

RANSOMES - see BOBCAT / RANSOMESROPER - see AYP - Roper / SearsSCAG

340-109 48110481706

16-1/2 5/8 none none 2-1/2 .203

A48110(2) for 32″ cut or (3) for 48″ cut

340-100 48110481706

16-1/2 5/8 none none 2-1/2 .240

482461 / 482877 / A48110(2) for 32” cut, (3) for 48” cut mid size mowers. Heavy Duty Blade - Standard Lift.

340-113 48184481710A48184

16-1/2 5/8 none none 3 .204

(2) for 32″ cut or (3) for 48″ cut, High lift blade.

360-917 see above 16-1/2 5/8 none none 2-1/2 .204

(2) for 32” cut or (3) for 48” cut, Shark Tooth mulching blade.

340-158 48108481707A48108

18 5/8 none none 2-1/2 .203

(2) for 36″ cut or (3) for 52″ cut.

340-633 482462 18 5/8 none none 2-1/2 .203

(2) for 36″ cut High lift blade, (after 2000). (While Quantities Last).

340-121 481711 48185

18 5/8 none none 3 .203

482467 / A48185(2) for 36″ cut or (3) for 52″ cut, High lift blade.

360-918 see above 18 5/8 none none 2-1/2 .204

(2) for 36” cut or (3) for 52” cut. Shark Tooth Mulching blade.

PROGRESSIVE TURF

09-16


B B

360-029 482235 482724

18 5/8 none none 2-1/2 .204

482961 / 483317

(2) for 36″ cut or (3) for 52″ cut, Shark Tooth Mulching Blade.

340-174 48109A48109482129

20 5/8 none none 2-1/2 .204

(2) for 40” cut and (3) for 60” cut.

310-078 48111A48111481708

21 5/8 1/4 1-5/8 2-1/2 .250

(3) for 61″ cut, Heavy Duty Blade.

340-628 48304 482879 A48304 / 481712

21 5/8 none none 3 .204

(3) for 61″ cut, High lift blade.

340-626 A4811148111

21 5/8 none none 2-1/2 .203

(3) for 61” cut.



360-920 see above 21 5/8 none none 3 .250

(3) for 61” cut. Heavy duty, Shark Tooth Mulching Blade.

340-129 4811248113481709

24-1/2 5/8 none none 2-1/2 .203

(3) for 72″ cut. For an H.D. blade see our 345-434 under the “Woods” heading.

360-995 481701481709

24-9/16 5/8 none none 3 .250

(3) for 72” cut, Shark Tooth Mulching Blade. Fits many commercial series mowers.

SCOTTS (Home Depot brand name) also see John Deere & Murray335-040 56631E701 15-3/4 27/32

(.850)none none 2-1/4 .134

(3) for 46″ cut GT rail frame, Mulching blade - models made by Murray

360-700 65663192117E701

15-3/4 27/32(.850)



SCAG continued

09-17


B B

330-448 M127466 16 11/16 none none 2-1/2 .203

(3) for 46″ cut, lawn tractors S2046 and 2546 (1999 thru 2001) models - made by John Deere



330-447 M135589 16-5/8 3/4 none none 2-1/2 .203

(3) for 48” cut yard tractors, High lift blade for bagging. Fits John Deere lawn and garden tractors; also used on Scotts model S2048 yard tractor.

330-383 M113517 16-5/8 13/16 none none 2-1/2 .204

(3) for 48” cut, Mulching blade. Used on SCOTTS lawn and garden tractors S2048 and S2348 (1999 thru 2001) series.

330-373 M115495 16-5/8 13/16 none none 2-1/2 .204

(3) for 48” cut, new style. Used on SCOTTS lawn and garden tractors S2048 and S2348 (1999 thru 2001) series.



335-092 094692E701 94692 94692E701

17-11/16 27/32(.850)


94692E701MA(3) for 48” and 50” cut. Medium Lift blade. Fits SCOTTS models 48560X9Z, 50563X8, 52370X92.

330-365 M115496 18-5/8 13/16 none none 2-1/2 .204

(3) for 54″ cut, new style, models made by John Deere.

360-406 see above 18-5/8 13/16 none none 3 .204


335-019 495100 095100E701 095100E701A

21-1/4 27/32(.850)


5539MA / 721392 / 7769203

(2) for 42” cut, Mulching blade, 3 in 1 blade. Fits SCOTTS lawn tractors with 42” decks (1998-2008).

360-701 see above 21-1/4 27/32(.850)



330-339 21-3/8 11/16 13/32 3-11/16 2-1/2 .164

(2) for 42” cut. Fits Scotts lawn and garden tractor models: L1742 and L17.542 (2002) series 42” and 48” decks.

SCOTTS (Home Depot brand name) also see John Deere & Murray

09-18


B B

330-449 M127129 M139802

21-7/16 11/16 none none 2-1/2 .160

M145969

(2) for 42” cut, Mulching blade. Fits SCOTTS S1642 and S1742 (1999-2001) lawn & garden tractor series with 42” deck; also used on SCOTTS yard tractors.



360-720 672573672573E701

21-5/8 13/32 none none 2-1/4 .187

22″ cut, Mulching blade for walk behind mowers, 3 in 1 mower - made by Murray (While Quantities Last)

SEARS / CRAFTSMAN - see AYP and MURRAYSENSATION - also see GILSON and LAWN BOY

340-786 123101229904Gilson# 230904

20-3/8 3/8 3/8 2 2-1/2 .187

20″ cut.

SIMPLICITY - also see ALLIS CHALMERS 345-009 108297

202589211-9/16 1-3/8 3/8 3-1/16 2-1/2 .150

2108297 / 2108297A / 2108297AS / 2108297ASM

(3) for 32″ cut, Left hand cut blade. (Allis Chalmers# 2025892)

345-017 1085012087731

13 1-3/8 3/8 3-1/16 2-1/2 .150

2108501 / 2108501A / 2108501AS / 2108501ASM

(3) for 36″ cut, Left hand cut blade. For Broadmoor 36, (Allis Chalmers# 2087731)

345-090 1656144 1656144A

14-1/2 3/4 13/32 3-1/16 2 .150

1656144AS / 1656144ASM / 108298SM / 2025856 / 2025856SM

(3) for 42″ cut, Left hand cut blade, 7000 and 7100 series and diesel models, pre 1997.

345-074 1656147 1656147A

15-5/16 3/4 13/32 2-9/16 2 .150

1656147AS / 1656147ASM

(3) for 42” cut, Fits SIMPLICITY models: 600, 1800, 5000, 6000 also Sunrunner FC and GT series.

345-106 1704856 1704856A

16-1/8 3/4 13/32 2-9/16 2 .203

1704856AS / 1704856ASM / 1704856BZ

(3) 345-106 for 44” cut or (1) 345-106 and (1) 345-102 for 38” cut. Found on both LTH and 1600 series.

SCOTTS (Home Depot brand name) also see John Deere & Murray

09-19


B B

345-005 1704100 1704100AS

16-1/8 3/4 13/32 2-9/16 2 .203

1704100SM / 1716696A / 1716696ASM / 1727774A / 1727774BMA / 1727774SM

(3) for 44” cut. Fits SIMPLICITY LTH, 14-16 GT, 1600, 1700 series; small frame garden tractor 1989 and later.

330-030 17573031757303BM

16-1/2 13/16 none none 2-1/4 .149

1757303YP


345-082 108448 108448SM

16-11/16 3/4 13/32 3-1/16 2 .150

1656143 / 1656143A / 1656143AS1656143ASM / 1656143SM 210848A / 210848ASM

(3) for 48” cut, Left hand cut blade, New style mowing decks. Fits Simplicity GTH-L, 700, 900, 7000 series.

345-003 1679916 1679916SM

16-3/4 1 none none 2-1/2 .203

1679916A / 1679916ASM

(3) for 48” cut, Left hand cut. Fits SIMPLICITY GTH-L, 700, 900, 1900, 7000 series; fi ts large frame garden tractors, 1987 and later.

345-124 1656146 1656146ASM

17 3/4 3/8 2-9/16 2 .187

(3) for 48″ cut, 5200, 6100, 6200 and 6500, FC and GT series.

345-006 1708229 1708229AS

18-1/8 3/4 3/8 2-9/16 2 .203

1726357 / 1726453BZYP / 1726453BZ / 1726453A

(3) for 50” cut. For large frame tractors. Fits AYP, SIMPLICITY 14-16 GT, 1700 series

345-108 1636451 1636451SM 1657589A

18-1/2 3/4 13/32 2-9/16 2 .187

1657589ASM / 1657589SM / 1657589

(2) for 36” cut. For SNAPPER ZTR model 361 only. For Simplicity models use (1) 345-108 and (1) 345-116 for 36” cut bagger. Fits SIMPLICITY models 500, 600, 1300, 4000, 5000, RT series; 36” Sun Runner LT and RT series.

345-116 1671593 1671593SM 1671593A

18-1/2 3/4 13/32 2-9/16 2-1/2 .187

1671593ASM / 1685172 / 1685172SM

For 36” cut, Left hand side. (Use with deluxe grass catcher). (1) 345-116 and (1) 345-117 for 36” cut. Fits Dixon ZTR model 361 with bagger. For Simplicity use either (2) 345-116 for 36” cut or (1) 345-116 and (1) 345-108 for 36” cut for bagger models. For SIMPLICITY 500, 600, 1300, 4000, 5000 series; requires 2 for 36” cut.

SIMPLICITY - also see ALLIS CHALMERS continued

09-20


B B

335-045 17372521737252A

18-1/2 .795 none none 2-1/2 .204

1737252AYP / 1737252BM1737252BMA / 1737252BZ / 1737252YP

(3) for 52” cut. Fits Simplicity / Snapper 52” Zero Turn mowers; also found on Massey Ferguson.

330-032 1758878BMYP1759262BMYP

21-5/16 13/16 none none 2 .204


360-914 17592621759262BMYP

21-5/16 13/16 none none 2-1/2 .204


345-102 1704101 1704101A

22-1/4 3/4 13/32 2-9/16 2 .203

1704101AS / 1704101ASM / 1704101SM / 1716695A / 1716695ASM

(1) 345-102 and (1) 345-106 for 38” cut. For LTH and 1600 series.

SNAPPER - also see MASSEY FERGUSON345-109 1736044AYP 16 1 3/8 2-9/16 2-1/2 .203


335-044 1737228A 1737228BZ 1737228MA

16-1/8 .795 none none 2-1/2 .204

1737228BZYP(3) for 46” cut.Fits Snapper 46” Zero Turn mowers; also found on Simplicity, Massey Ferguson.Fits on Massey Ferguson models: 130 and 2523.

355-183 17036 76675

16-1/4 5/8 1/4 1-5/8 2-1/2 .250

77378 / 77386 / 100340 / 101366 / 5020843 / 5020843A5020843ASM / 5101986 / 5101986BMYP / 70170367017036BMYP / 7017036YP / 7077378

(2) for 32″ cut or (3) for 48″ cut, High lift blade, Heavy duty blade.

360-916 4830117017036

16-1/4 5/8 none none 2-1/2 .204

7076675 / 7077378 / 77378 / 76675 / 17036

(2) for 32″ cut or (3) for 48″ cut, Shark Tooth mulching blade.

335-120 19733 7019733

16-1/2 3/8 none none 2-3/4 .160

7019733BZ / 7019733BZYP(3) for 48” cut, For SNAPPER LT48 steel decks.

SIMPLICITY - also see ALLIS CHALMERS continued

09-21


B B

330-696 1-70437017043

16-1/2 5/8 none none 2-1/2 .203

(3) for 48″ cut, Fits commercial models PMA-480, Pro Series 0 and Pro 7 Series 0, 1, 2 and 4.


(2) for 32” cut or (3) for 48” cut, Shark Tooth mulching blade.

335-130 1759055YP 16-1/2 .800 none none 2 .204

(3) for 48” cut. Fits 48” 360Z Fabricated Deck Models ZT2348, 2691319-00.

330-030 17573031757303BM1757303YP

16-1/2 13/16 none none 2-1/4 .149


335-136 7079369 7079369YP 79369

16-15/16 1/2 none none 2-1/2 .203

(3) for 48″ cut, Low lift blade, for ZTR mowers.

335-123 7-93887079388

16-15/16 1/2 none none 2-1/2 .203

(3) for 48″ cut, High lift blade, for ZTR mowers.


(3) for 48” cut, Shark Tooth Mulching Blade.

355-016 17037 7075751 363055

18 5/8 none none 2-1/2 .150

7075751BZYP / 7075751BZ / 76450(2) for 36″ cut or (3) for 52″ cut, Series 2 decks, Pro Series 0 and Pro 7 Series 0, 1, 2 and 4.

310-052 1-7037 7017037

18 5/8 1/4 1-5/8 2-1/2 .250

7077344 / 77344

(2) for 36″ cut or (3) for 52″ cut, Heavy duty blade, Series 2 decks, Pro Series 0 & Pro 7 Series 0, 1, 2 & 4.

315-235 292467075751

18 5/8 none none 2 .240

(2) for 36” cut, (3) for 52” cut, Heavy duty blade.


(2) for 36” cut or (3) for 52” cut. Shark Tooth Mulching blade.

SNAPPER - also see MASSEY FERGUSON continued

09-22


B B

345-006 1708229 1708229AS

18-1/8 3/4 3/8 2-9/16 2 .203

1726357 / 1726453BZYP / 1726453BZ / 1726453A

(3) for 50” cut. For large frame tractors. Fits AYP, SIMPLICITY 14-16 GT, 1700 series and SNAPPER LT200 series and zero turn 150Z with 50” decks.

335-045 1737252BZYP 1737252A

18-1/2 .795 none none 2-1/2 .204

1737252BM / 1737252BZ / 1737252MA

(3) for 52” cut. Fits Snapper 52” Zero Turn mowers; also found on Simplicity, Massey Ferguson.

335-197 2-4466 4-2998

19-7/16 1 none none 2-1/4 .203

7024466 / 7042998 / 7042998BZ / 7042998BZYP

(2) for 38″ cut, front engine rider models LT1438H and Black Hawk model BH120G38A.

345-110 116870171687017SM

20-9/16 1 3/8 2-9/16 2-1/2 .203

1725921ASM / 1736043 / 1736043A / 1736043AYP1736043BM / 1736043BMA /1736043BMYP /1736043BZ


335-356 1-7002 1-9645

20-11/16 3/8 3/8 2-3/4 2-3/4 .160

1-9702 / 1-9710 / 2-6691 / 7017002 / 7019645 7019702 / 7019795 / 7019795BZ / 7026691

21″ cut, steel deck walk behind series 9.

335-240 19795 7019795

20-11/16 3/8 3/8 2-3/4 2-3/4 .160

7019795BZ / 7019795BZYP

21″ cut walk behind, (2) for 41″ tractor, Std. & BBC, punched for high lift defl ectors 335-232.

335-042 1-7168 1-7002 1-9645

20-11/16 3/8 3/8 2-3/4 2-3/4 .160

1-9702 / 1-9710 / 2-6691 / 7017168 / 7026691 / 7026691BZ / 7041939 / 7041939BZ / 7041939BZYP

21″ cut, Mulching blade - Recycler.

335-234 71002427100242AYP

20-3/4 3/8 none none 2-1/2 .149

7100242BZYP

21” Mulching blade / Wave 21” push mower. Found on Murray 7800268 (BTPV21675E), Replaces obsolete# 7100242AYP.


09-23


B B

320-547 7-92227-9371

21 1/2 none none 2-1/2 .250

7079222 / 7079371YP / 7079371BMYP

(3) for 61” cut, Heavy duty blade. Standard lift blade. For ZTR mowers. (For Shark Tooth version see our 360-915 under the WOODS heading).

320-548 7-9222 7079222 7079371YP

21 1/2 none none 2-1/2 .240

7079371BMYP

(3) for 61” cut, Heavy duty blade. High lift blade. For ZTR mowers. (For Shark Tooth version see our 360-915 under the WOODS heading).

310-078 48111A48111

21 5/8 1/4 1-5/8 2-1/2 .250

481708 / 17081 / 1520842 / 5020842 / 7017081 / 70757707075770BZYP / 7075770YP / 7075770BMA / 7075770BZ

(3) for 61″ cut, Heavy Duty Blade. Fits mid mount ZTR models. Used on many Commercial Pro mowers.

335-217 2-6428 7026428 7026428BZ

21 13/16 3/8 2-1/2 2-1/4 .134

7026428BZYP21” cut, Mulching blade for walk behinds. For Platinum series mowers. (While Quantities Last). Also see our 335-814

335-198 1737816BMYP 21-3/16 .798 none none 2-1/4 .170

(2) for 42″ cut. Fits Snapper ZTS 7000.

335-200 1731898 1731898A

21-3/16 .975 none none 2-1/4 .170

1731898BZ, 1731898MA / 1731898BZYP(2) for 42″ cut. Fits Snapper LT-200 series and Zero Turn 150Z series.

360-919 17318981731898A

21-3/16 .975 none none 2-1/2 .160

1731898ASM / 1731898BMA / 1731898BZ / 1731898BZYP(2) for 42” cut, Shark Tooth mulching blade.Fits Snapper LT-200 series and Zero Turn 150Z series and ZTS 7500 Craftsman.

330-032 1758878BMYP1759262BMYP

21-5/16 13/16 none none 2 .204


360-914 17592621759262BMYP

21-5/16 13/16 none none 2-1/2 .204


335-068 7100851 7100851A

21-5/8 13/32 13/32 1-7/8 2 .135

7100851BMA / 7100851BZ / 7100851AYP

Fits 22” cut Murray, Brute Power etc push mowers. Mulching blade.


09-24


B B

335-236 7103288YP 22 3/8 13/32 2-1/2 2-1/2 .150

22” Mulching blade for Murray / Snapper push mowers.Fits 2010 and newer Snapper NXT models with 22” decks. Found on models: 7800580, 7800752,7800696, 7800782. Also fi ts 2010 and newer Snapper SPX2270 models with 22” decks. For models: 7800776, 7800707

335-398 1-9518 7019518 7019518YP

25 1-1/16 9/16 7-1/2 2-3/4 .187

25″ cut, rear engine riders, blade punched for use with our 335-422 air lifts.

335-299 1-8068 7018068

26 1-1/16 9/16 7-1/2 2-3/4 .187

7018068YP / 7018068BMYP26″ cut, rear engine rider - new style, blade punched for use with our 335-414 air lifts.

335-315 1-9515 7019515

28 1-1/16 9/16 7-1/2 2-3/4 .187

7019515BZYP28″ cut, rear engine riders - new style, blade punched for use with our 335-422 air lifts.

335-289 1-6980 7016980

28 1-1/16 9/16 7-1/2 2-3/4 .160

7016980BZ / 7016980BZYP28″ cut, Mulching blade - Recycler, for rear engine riders.

335-281 1-8038 6-0332

30 7/8 none none 2-3/4 .187

7018038 / 7060332 / 7060332YP30″ cut, rear engine riders - older style, blade punched for use with our 335-414 air lifts. (While Quantities Last)

335-307 1-8069 7018069

30 1-1/16 9/16 7-1/2 2-3/4 .187

7018069BZ / 7018069BZYP30″ cut, rear engine riders - new style, blade punched for use with our 335-414 air lifts.

360-930 see above 30 1-1/16 9/16 7-1/2 2-3/4 .187

30″ cut, Shark Tooth mulching blade for rear engine riders - new style.

335-331 1-9523 7019523 7019523BZ

33 1-1/16 9/16 7-1/2 2-3/4 .187

7019523BZYP33″ cut, rear engine riders - new style, blade punched for use with our 335-422 air lifts.

335-293 1-6982 7016982 7024741BZ

33 1-1/16 9/16 7-1/2 2-3/4 .160

7024741AYP33″ cut, Mulching blade - Recycler, for rear engine riders.

335-406 3-7751 / 3-1184 / 6-0332 / 7037751BM / 7037751BMYP / 7037751 / 7037751A

Blade holder - older mowers with single hole blades can be adapted to above blades by installing a blade holder bar. For 25”, 26”, 28”, 30” and 33” riding mowers. Length: 12-1/2”


09-25


B B

335-422 3-7723 6-0480 7060480SM

4 5/16 5/16 1-1/4 4 .120

7037723BMYP / 7037723 / 7060480Air lift set contains: (2) 3 hole defl ectors, (6) star lock washers, (6) 5/16″-24 X 21/32″ grade #5 - oval head screws and (6) hex nuts (Fits 28″ and 33″ blades).

335-414 3-1724 7031724 7031724YP

5-1/4 none 5/16 2-1/2 1-1/2 .120

Air lift set contains: (2) 2 hole defl ectors, (4) star lock washers, (Fits 26″ and 30″ blades) (4) 5/16″-24 X 21/32″ grade #5 - oval head screws and (4) hex nuts

335-232 6-0785 7060785 7060785YP

2-11/16 none 5/16 1-1/4 1-3/4 .120

Air lift set contains: (2) 2 hole defl ectors, (4) star lock washers, (4) 5/16″-24 X 21/32″ grade #5 - oval head screws and (4) hex nuts

STIGA355-027 1134-1452-01 12-1/4 .397 .335 3.25 2 .150

For Stiga Villa

355-247 1111-2759-01 12-11/16 3/4 none none 1-9/16 .095

355-007 1134-1903-00 14-1/2 .399 .334 3.24 2 .150

For Stiga Park

355-026 1134-0456-00 14-1/2 .397 .335 3.25 2 .150

For Stiga Villa

355-005 1134-2450-01 1134-9002-01

15 13/32 11/32 3-9/32 2 .150

For Stiga Park models 100M, 102M and Villa.

355-000 1134-9124-01 16-11/16 3 lobed none none 2.362 .134

Requires (3) for set. Fits model: Park 110 COMBI (2007 and newer).

355-030 1111-1530 18-1/8 .385 .326 2.12 2 .134

For Stiga / Multiclip.

355-002 1134-9125-01 18-1/8 3 lobed none none 2.52 .134

Requires (3) for set. Fits Stiga model: Park 125 COMBI (2007 and newer).


09-26


B B

355-246 1111-2598-01 20-13/16 13/32 5/16 2-1/8 3-5/16 .095

SWISHER360-573 3295 17-1/2 13/32 13/32 3 2-1/2 .187

(3) for 50″ cut. Shark Tooth mulching blade. Fits Swisher models: ZT2350A and ZT2450A.

355-732 660-1 20-1/2 .655X

.755


(3) for 60″ cut

355-050 9004 20-1/2 13/32 13/32 3 2-1/4 .187

(3) for 60″ cut, model T-60 Finish Cut Trailmower.

360-575 3293 20-1/2 13/32 13/32 3 2-1/2 .187

(3) for 60″ cut. Shark Tooth mulching blade.Fits Swisher models: T-60, T1360, T14560, T18560, T1360H, ZT2350, ZT2560, ZT2660 and ZT2660B.

360-580 see above 20-1/2 13/32 13/32 3 3 .250

(3) for 60″ cut. Shark Tooth mulching blade, Heavy Duty blade.

355-051 9005 22 13/32 13/32 3 2-1/4 .187

(2) for 44″ cut, model T-44 Finish Cut Trailmower.

TORO / WHEEL HORSE350-116 106077

106636 13-7/8 3/4 none none 2 .203

117192 / 3-11620(3) for 42″ cut, side discharge, Set# 106636 / 3-11620.



360-842 108-4081108-4081-03

14 5/8 none none 250 .250

108-4089-03, 108-4110-03, 108-4111-03,108-4112-03, 114-4961, 114-4962, 114-4964, 114-4965

(3) for 40″ cut. Shark Tooth mulching blade, Heavy Duty blade. For 40″ Turbo Force, 14 High Sail.

350-041 1002006693

14 3/4X 5/8

1/4 1-5/8 2 .203

(3) for 42″ cut, side discharge. Set# 6693 / 3-6693.Models R1-426, 5-1000 thru 5-1001, 5-1002, 5-1010, 5-1011, 5-1421 thru 5-1423 and 65-42 MS01, from 1966 thru 1976.

STIGA continued

09-27


B B

350-108 106108106635

14-1/2 3/4 none none 2 .203

14-4879 / 79-2920 / 79-2920-03(3) for 42″ cut, fi ts 42″ rear discharge mowers. Set# 106635. (Replaces our now discontinued# 345-112)

335-453 112-0302 14-7/8 6 point star (5/8)

3/8 2-1/2 2-1/2 .150

(1) 335-453 and (2) 335-452 for 46″ cut. Mulching blade. Replaces the star centre hole. Centre blade, 1999 and after.

325-884 112-0302 14-7/8 6 point star (5/8)

3/8 2-1/2 2-1/2 .203

(1) 325-884 and (2) 325-885 for 46” cut. Heavy Duty Blade. Centre blade. Fits LT1046 and i1046 series mowers. For star hole replacement blade.

360-850 116-6358-03120-9500-03

15.4 .660 none none 2-1/4 .160

(2) for 30” cut, Shark Tooth mulching blade. Fits TORO Timemaster 30, model#’s 20199 and 20200.

345-454 54-0010 54-0010-03

15-1/2 5/8 none none 2-1/2 .187

54-0010-09 / 103-0627 / 106-0630(3) for 44″ cut, deck# 57358,Fits Groundsmaster models 117 and 1144 Rider Tractors. Also Toro Walk behinds and Timecutter zero turn models.

345-039 55-494055-4940-03

15-1/2 5/8 none none 2-1/2 .203

55-4940-03 / 108-1125(3) for 44″ cut, High lift blade. Fits model 30144 - Midsize mower & walk behinds and Timecutter zero turn models.

345-114 92-795292-7952-03

15-1/2 5/8 none none 2-1/2 .187

92-7952-09 / 106-0630(3) for 44” cut. Fits TimeCutter ZX440 Recycler.



350-124 10-6078 10-66373-10607

16-1/16 3/4 none none 2 .203

(3) for 48″ cut side discharge, Set# 3-10607


(3) for 48″ cut, Shark Tooth mulching blade

355-183 103-2527 16-1/4 5/8 none none 2-1/2 .250

(2) for 32” deck; 3 for 48” deck, Heavy duty blade

355-028 103-6581 103-2517

16-1/4 5/8 none none 2-1/2 .204

(3) for 48″ cut, Mulching blade, Heavy duty blade.


(2) for 32” cut or (3) for 48” cut, Shark Tooth Mulching Blade.

TORO / WHEEL HORSE continued

09-28


B B

335-452 112-3691 112-0304

16-3/8 6 pointstar (5/8)

3/8 2-1/2 2-1/2 .150

(2) 335-452 & (1) 335-453 for 46″ cut. Mulching blade. Replaces the star centre hole. Outside blade, 1999 & after.

325-885 112-0304 16-3/8 6 pointstar (5/8)

3/8 2-1/2 2-1/2 .203

(2) 325-885 and (1) 325-884 for 46” cut. Heavy Duty Blade. Outer / Side blades.Fits LT1046 and i1046 series mowers. For star hole replacement blade.

345-450 117-7277117-7277-03

16-1/2 5/8 none none 2-1/4 .160

(3) for 48” cut. High Lift blade, Standard duty blade. Fits Toro Titan Zero Turn mowers..

340-100 133-2137107-3192-03

16-1/2 5/8 none none 2-1/2 .240

(3) for 48” cut mid size mowers. Medium Lift blade, Heavy duty blade.

345-502 107-3192107-3192-03

16-1/2” 5/8 none none 2-1/2 .250

(3) for 48” cut. High Lift blade, Heavy duty blade.Fits Toro Commecial walk behinds, Z Master, Z Master G3 and GrandStand mowers. Lift: 1”

345-500 107-3196107-3196-03

16-1/2 5/8 none none 2-1/2 .250

(3) for 48” cut mid size mowers. Heavy Duty Blade. Fits Toro Commercial Recycler Mowers.

350-199 113579 17 5/8 none none 2 .204

(3) for 50″ cut, Fits Wheel Horse 718Z and 724Z, also replaces Dixie Chopper# 30227-50.

345-505 113579 17 5/8 none none 2-1/2 .250

(3) for 50” cut. High Lift blade. Heavy duty blade. Fits Wheel Horse 718Z and 724Z, Replaces Dixie Chopper# 30227-50.

345-214 117-1156117-1156-03

17-1/2 5/8 none none 2-1/4 .160

(3) for 50” cut. High Lift blade. Fits Toro Titan Z (2009 thru 2010).

345-212 112-9759 112-9759-03

17-1/2 5/8 none none 2-1/4 .164

(3) for 50″ cut, Standard Lift blade. Fits Toro Timecutter Z series.

345-210 110-6837110-6837-03

17-1/2 5/8 none none 2-1/4 .170

(3) for 50” cut, Heavy duty blade. High lift blade. Fits Toro Timecutter Z5000, model 74370 Time Cutter 74375.(Will replace Toro# 115-5059-03 if (3) blades ordered).


(3) for 50” cut, Shark Tooth mulching blade. Fits Toro model Timecutter Z.NOTE: Can be used to replace Exmark 115-5059-03 / 115-5062-03 and Toro 115-5059-03 / 115-5062-03.


09-29


B B

325-510 112-0316 17-7/8 6 pointstar (5/8)

none none 2.375 .164

(3) for 50” cut - Standard Duty blade. Fits TORO models: GT2100 (2006), GT2200 (2006 and 2007), LX500 (2006), SL500 (2007). NOTE: For heavy duty blade see our 325-507, Shark Tooth Blade see our 360-076.

325-507 112-0316 17-7/8 6 pointstar (5/8)


(3) for 50” cut - Heavy Duty blade. Found on Toro models: LX500 and GT2100 with 50” cut decks. (Found on MTD rider model#s 13AA925P004, 17AF2ACP004, 17BF2ACP011). NOTE: For standard duty blade see our 325-510, Shark Tooth Blade see our 360-076.


none none 2-1/2” .187

(3) for 50” cut, Shark Tooth Mulching blade.

345-018 27-099044-5480

18 1/2 none none 2-1/2 .187

44-5480-03 / 106-0628

(3) for 52″ cut or (2) for 36″ cut for Groundsmaster, also used on ZTR’s.

345-462 56-239056-2390-03

18 1/2 none none 2-1/2 .187

56-2390-09 / 106-0626 / 108-1127

(2) for 36” cut and (3) for 52” cut walk behind mowers. High lift blade.

360-410 104-1301108-1477

18 1/2 none none 2-1/2 .203

92-7961 / 92-7961-03 / 92-7961-09 / 108-1127

(3) for 52″ cut, Shark Tooth mulching blade. NOTE: For H.D. version see our 360-418 (While Quantities Last)

345-553 108-1117 103-2528

18 5/8 none none 2-1/2 .250

105-7781 / 105-7781-03 / 1-633482

(3) for 52” cut. High Lift / Heavy duty blade. Fits Z Master mower, turbo force deck.

360-918 105-7779105-7779-03

18 5/8 none none 2-1/2 .203

105-7794 / 105-7794-03 / 105-7795 / 105-7795-03 / 105-7796 / 105-7796-03 / 108-1118 / 110-0406 / 110-0408 / 110-0409

(2) for 36″ cut or (3) for 52″ cut, Shark Tooth Mulching blade. Fits Toro Commercial Z-Master series. Replaces Atomic blade Toro# 105-7796-03 if you order (3) 360-918 blades.

345-439 55-4210 18 5/8 none none 2 .187

(2) for 36″ cut or (3) for 52″ cut. Fits models 30136 and 30152, midsize mowers.

345-470 40-3760 18 5/8 none none 2 .203

(3) for 52″ cut, Fits models GM117. (While Quantities Last).


09-30


B B

345-464 107-1741 107-1741-03

18 5/8 none none 2-1/2 .187

(3) for 52″ cut. For Toro Time Cutter ZX models. NOTE: For Time Cutter Recycler blades see our 345-465 (While Quantities Last)

360-846 see above107-1742

18 5/8 none none 2-1/2 .187

107-1742-03 / 120-2379 / 120-2379-03(3) for 52″ cut, Shark Tooth mulching blade.

355-218 103-2518 18 5/8 none none 2-1/2 .204

(2) for 36” cut, (3) for 52” cut, Mulching blade.

345-452 105-7794105-7794-03

18 5/8 none none 2-1/2 .250

(3) for 52” cut. Heavy Duty blade. Medium Lift blade.Fits Toro Z-Master models: Z400 and Z500, also found on older Turbo Force 7 gauge decks.

355-067 109-6873 18 15/16 none none 2-1/2 .204

(3) blades for 52” cut. High lift blades. Fits TORO TITAN Z5200 Zero-Turn-Radius Riding Mowers.

355-041 103-6392103-6392-S

18 15/16 none none 2-1/2 .204

(3) for 52″ cut, Mulching blade, Fits Lazer Z for series #540,000 & higher; fi ts Viking, Metro 36″ & 52″ cut

360-003 103-6397 18 15/16 none none 2-1/2 .204

(3) for 52” cut, Shark Tooth Mulching Blade. NOTE: FOR HEAVY DUTY VERSION SEE OUR 360-008 > Next page

360-008 103-6397 18 15/16 none none 3 .250

(3) for 52” cut, Shark Tooth Mulching Blade, Heavy Duty blade. Fits EXMARK models: Lazer Z, 540,000 & higher.

345-400 115-4999 18-3/4 5/8 none none 2-1/4 .164

(3) for 54” cut. Mulching blade.For Toro Titan ZX5400 and ZX5420. Will replace Toro# 115-4999-03 if (Qty: 3) 345-400 are ordered.

355-001 115-9650115-9650-03

18-3/4 5/8 none none 2-1/4 .164

(3) for 54” cut, Mulching blade.Fits TORO Titan MX5400, MX5480, ZX5400, ZX5420 and ZX5450. (3) required to replace Exmark 115-9650-03.

360-415 115-4999115-4999-03

18-3/4 5/8 none none 2-1/2 .187

115-2454-03 / 115-4999-03 / 115-9650-03(3) for 54” cut, Shark Tooth mulching. Fits Toro Titan ZX5400 & ZX5420.(3) required to replace Toro# 115-2454-03 / 115-4999-03 / 115-9650-03

350-157 109918109079

18-3/4 3/4 none none 2 .203

(2) for 37″ cut, side discharge mowers, Set# 109079


09-31


B B

345-330 20-2730 19 7/16 none none 2-1/4 .140

Fits old Whirlwind and Guardian mowers, use with our 405-175 blade adapter. (While Quantities Last)

345-043 86-001086-0010-03

19 1/2 none none 2-1/2 .250

(7) blades required for 455D model.

360-848 106-7166-03107-0210-03

19 1/2 none none 2-1/2 .250

107-0215-03 / 108-1451 / 108-1452 / 110-6116-03

(7) for Toro Groundsmaster 455D, 4100D, 4100-D and 4110-D series. Shark Tooth Mulching blade, Heavy Duty blade.

345-165 14-488914-779979-1720

19-1/4 5/8 none none 2-1/2 .187

79-3060 / 79-3061 / 79-3061-03(2) for 38″ cut, Mulching blade - Recycler, fi ts Zero Turn ZTR models 616 and 620.

345-038 57-470057-4700-03

19-1/4 5/8 none none 2-1/2 .187

57-4700-09

(2) for 38″ cut, High lift blade, side discharge, fi ts models 612, 616 and 620 ZT units, also fi t 200 series side discharge


(2) for 38″ cut, Shark Tooth mulching blade. (While Quantities Last).


(2) for 38″ cut, Shark Tooth mulching blade. (Heavy Duty version of our 360-800)

345-050 112-8841 112-8841-03

19-3/4 7/16 3/8 2-7/16 2-1/4 .129

Pushmower blade for 20” cut model. (fi ts 789963 with 20” decks). Fits Toro 29639 and 29641.

360-803 110-5946110-5948110-5948-03

20 1/2 none none 2-1/2 .250

Fits TORO GROUNDSMASTER 5900 / 5910. Shark Tooth mulching blade / Heavy duty blade.Requires (9) blades for 16 FT cut or (3) blades per deck X 3 decks.

345-060 69-6920 20 5/8 none none 2-1/2 .250

Requires (11) blades for 16 FT cut. Heavy duty blade. For TORO GROUNDSMASTER model: 580D.

360-809 108-1453107-0217-03

20 5/8 none none 2-1/2 .203

Requires (11) blades for 16 FT cut. For TORO GROUNDSMASTER model: 580D.


09-32


B B

345-275 93-024193-0241-03

20-1/4 7/16 none none 2-1/4 .134

21″ cut, Recycler with 4.5 Hp engine, model 20444, walk behind.

360-810 110-4701110-4701-03

20-1/2 1/2 none none 2-1/2 .250

110-4702 / 110-4702-03 / 110-4703 / 110-4703-03

(3) for 60” cut, Shark Tooth mulching blade / Heavy duty blade. Fits TORO GROUNDSMASTER 7200.

345-504 105-7715-03 20-1/2 5/8 none none 2-1/2 .250

(3) for 60” cut. Heavy duty blade. Fits TORO Professional Z Master with 7-guage side.

345-506 105-7777-03 20-1/2 5/8 none none 2-1/2 .250

(3) for 60” cut. Heavy duty blade. Fits TORO Recycler decks.

345-171 112947 20-1/2 5/8 none none 2-1/2 .204

(3) for 60″ cut, Wheel Horse models.

345-555 105-7718 105-7718-03

20-1/2 5/8 none none 2-1/2 .250

108-1114 / 108-1123(3) for 60” cut, Heavy duty blade.

360-811 105-7715105-7715-03

20-1/2 5/8 none none 3 .250

105-7716 / 105-7716-03 / 105-7777 / 105-7777-03 / 105-8777 / 105-8777-03 / 106-8777 / 108-1123 / 108-1128 / 110-0405

(3) for 60” cut, Shark Tooth mulching blade / Heavy duty blade. Fits TORO Turbo Force deck built 2010 and later.

345-051 108-3762-03108-3762-03P

20-7/8 7/16 3/8 2-7/16 2-1/4 .150

108-0954-03 / 93-4106 / 93-4106-03 / 91-4106-03P

For 21” cut mower. Fits TORO Most 21” recycler decks: does NOT fi t 20465, 20466, 20475, 20476, 20482, 20483, and 20487. (For Shark Tooth version see our 360-804).

360-804 see above 20-7/8 7/16 3/8 2-7/16 2-1/4 .149

21″ cut, Shark Tooth mulching blade.

330-845 612543612543-01

20-7/8 5/8 17/32 2-9/16 3 .134

612543-03 / 683682 / 684380Fits most 21″ walk behind mower without BBC, new style, will replace 330-779 minus stiff ening plate.

345-203 14-165914-9419

20-15/16 7/16 3/8 2-7/16 2-1/4 .134

*Includes Stiffi ner plate* 75-9420 / 91-2256 / 91-2256-03 / 80-0510 / 80-0510-03

21″ cut, Recycler. (Includes: stiff ening plate), For older walk behind mowers.


09-33


B B

345-496 62-770062-7700-03 / P

20-15/16 7/16 3/8 2-7/16 2-1/4 .134

21″ cut, Super high lift blade, Vacu - Power - rear bagger, model 26622

360-420 see above 20-15/16 7/16 3/8 2-7/16 2-1/4 .150

21″ cut, Shark Tooth mulching blade.

345-306 8-5230 21 7/16 none none 2-1/4 .134

21″ cut, fi ts Guardian models 1971 thru 1973 and Whirlwind models 1972 thru 1976.

345-348 20-2720 21 7/16 none none 2-1/4 .134

21″ cut, fi ts Whirlwind II model, 1977 and later.

345-397 23-0070 26-0880

21 7/16 3/8 2-7/16 2-1/4 .134

3-8615 / 42-1000 / 42-1000-03 / 107-4276-03 / 107-4276-03P

21” cut. Fits EXMARK 21” rear bagger and TORO 21” rear bagger.

335-551 112-0315 21-3/16 6 pointstar (5/8)

5/16 2-1/2 2-3/4 .149

(2) for 42” cut, star center hole, 3 in 1 mulching blade, deep deck - 1997 & after; autodrive 1999 & after; also fi ts on newer Toro mowers using the 5 point blade hub, model 13AX60RG744.

345-421 44-6250 44-6250-03

21-1/2 1/2 none none 2-1/2 .187

106-0629 / 108-1124 (3) for 62″ cut, Groundmaster.

360-462 104-1303106-0631

21-1/2 1/2 none none 2-1/2 .250

(3) for 62″ cut. Shark Tooth mulching blade, HEAVY DUTY

345-045 92-560892-5608-03

21-11/16 1/2 none none 2-1/2 .250

(3) for 62” cut. Recycler, (7) for 11 FT Groundsmaster 4000D. Heavy duty blade. Fits TORO Recycler & Groundsmaster models: 3320, 3280D, 4000D, 7200 with 62” Guardian Recycler Mower and 7210 with 62” Guardian Recycler Mower.

360-926 107-0214107-0241-03

21-11/16 1/2 none none 2-1/2 .250

110-6115-03(3) for 62” cut, Shark Tooth mulching blade.


09-34


B B

TORO / WHEEL HORSE continued345-227 106-2247-03

110-1857-0321-11/16 5/8 none none 2-1/4 .160

(2) for 42” cut, Fits Toro model Time Cutter Z - Standard lift blade.

345-225 110-6568 110-6568-03

21-11/16 5/8 none none 2-1/4 .164

117-5372 / 117-5372-03(2) for 42" cut, Fits Toro model Time Cutter Z. High lift blade.

345-396 106-8744106-8744-03

21-11/16 5/8 none none 2-1/4 .160

(2) for 42” cut, Super High lift / Bagger blade. Fits Toro model Time Cutter Z.




(2) for 42″ cut. Shark Tooth mulching blade.

345-322 104-8697104-8697-03

21-3/4 7/16 none none 2-1/4 .150

104-8697-03P / 108-9764 / 108-9764-03 / 108-9764-03PFits 22” Recycler. Found on newer Lawn Boy / Toro push mowers equipped with Honda engines. Fits on Toro Atomic 22” mowers.

360-806 108-9764108-9764-03

21-3/4 7/16 none none 2-1/4 .150

108-9764P / 131-4546-03 / 131-4547-03 / 59534 / 59534P

Shark Tooth mulching blade.

345-054 108-7395-03 22 1/2 none none 2-1/2 .250

For Toro Commercial mowers. Combination blade. Heavy duty blade, Found on Toro Groundsmaster model: 4300-D etc.

345-055 117-0209-03 22 1/2 none none 2-1/2 .250

For Toro Commercial mowers. Angle Sail blade. Heavy duty blade, Found on Toro Groundsmaster model: 4300-D etc.

360-934 114-0434-03 22 1/2 none none 2-1/2 .187

For Toro Commercial mowers. Shark Tooth Mulching blade - High Lift blade.Found on Toro Groundsmaster model: 4300-D etc..

355-170 103-4209130-2860

22 .885 none none 2-3/4 .187

(1) 335-170 LEFT HAND blade (Black) plus (1) 355-171 RIGHT HAND blade (Red) for 42” cut.Fits Exmark NAVIGATOR bagging mowers and Toro 8000 series Direct Collect Zero turn rear bagging mowers.

355-171 103-4210130-2859

22 .885 none none 2-3/4 .187

(1) 335-171 RIGHT HAND blade (Red) plus (1) 355-170 LEFT HAND blade (Black) for 42” cut. Fits Exmark NAVIGATOR bagging mowers and Toro 8000 series Direct Collect Zero turn rear bagging mowers.

09-35


B B

360-808 110-0624-03 24-1/2 1/2 none none 2-1/2 .250

(3) for 72” cut, Shark Tooth mulching blade. Fits Toro Groundsmaster 3280 - D3320.

345-508 105-7711-03110-0404

24-1/2 5/8 none none 2-1/2 .250

(3) for 72” cut. Heavy duty blade. Fits TORO mid-fl ow deck, Z Master.

345-412 105-7784105-7784-03

24-1/2 5/8 none none 3 .250

110-0622-03(3) for 72” cut, High lift blade, Heavy duty blade. Fits TORO Z Master (2005 and newer) and TORO Z Master G3.

360-995 105-7784105-7784-03

24-9/16 5/8 none none 3 .250

(3) for 72” cut, Shark Tooth Mulching Blade. Fits Lazer Z model; fi ts GRAVELY PM272 series.

345-223 57-025094-186194-1861-03

24-3/4 1/2 none none 2-1/2 .250

(3) for 72″ cut Groundmaster - rear discharge.


(3) for 72” cut, Shark Tooth mulching blade.

345-314 23-2410 23-2410-03

25 3/4 none none 2-1/2 .250

29-5530 / 29-5530-03(3) for 72″ cut, Left hand cut blade for Groundsmaster, Heavy duty blade.

360-828 see above 25 3/4 none none 2-1/2 250

(3) for 72″ cut, Shark Tooth mulching blade, Left hand cut, Heavy Duty blade.

355-176 103-4207130-2861

25 .885 none none 2-3/4 .187

(1) 335-176 LEFT HAND blade (Black) plus (1) 355-177 RIGHT HAND blade (Red) for 48” cut. Fits Exmark NAVIGATOR bagging mowers and Toro 8000 series Direct Collect Zero turn rear bagging mowers.

355-177 103-4208130-2862

25 .885 none none 2-3/4 .187

(1) 335-177 RIGHT HAND blade (Red) plus (1) 355-176 LEFT HAND blade (Black) for 48” cut. Fits Exmark NAVIGATOR bagging mowers and Toro 8000 series Direct Collect Zero turn rear bagging mowers.

345-177 85-6040 85-6040-03

25-3/16 1/2 none none 2-1/2 .250

(3) for 72” cut, Heavy duty blade, Recycler deck blade, used on Groundsmaster models 322, 322D, 325 and 325D.

345-180 108-1958108-1958-03

25-3/16 1/2 none none 2-1/2 .250

(3) for 72” cut, Heavy duty blade, Fits TORO Groundsmaster models: 360, 7200, 7210 with 72” Guardian Recycler Mower. Also found on Z597-D Z Master mowers.


09-36


B B

360-830 100-5754-03 105-9810-03 107-0235-03

27 1/2 none none 2-1/2 .250

Shark Tooth mulching blade. (1) for 27″ Long blade for each individual rotary deck.Found on Toro Groundsmaster models: 3500D, 3505D, 4500D and 4700D. Note: Will replace Toro mulching blade#’s 100-5754-03 and 105-9810-03

345-413 33-4750 33-4750-03

31-3/8 5/8 none none 2-1/2 .187

32″ cut, High Lift blade.

345-338 80-4430 80-4430-03

31-3/8 5/8 none none 2-1/2 .187

32″ cut, Mulching blade - Recycler for rear engine riders.

TROY BILT - see BOLEN / TROY BILT & MTD LISTINGSWALKER

355-095 5705-0 20 5/8 13/64 3 2-3/4 .164

(3) for 54″ cut, side discharge. Note: Not for use on Walker DSD54″ decks.

355-097 5705-4 22 5/8 13/64 3 2-3/4 .164

(1) 355-097 and (1) 355-098 for 42″, (3) for 54″ cut; rear discharge, Left hand cut blade

355-098 5705-3 22 5/8 13/64 3 2-3/4 .164

(1) 355-098 and (1) 355-097 for 42″, (3) for 54″ cut; rear discharge, Right hand cut blade.

355-099 7705-2 25 5/8 13/64 3 2-3/4 .187

(1) 355-099 and (1) 355-100 for 48″, rear discharge, Left hand cut blade

355-100 7705-1 25 5/8 13/64 3 2-3/4 .187

(1) 355-100 and (1) 355-099 for 48″, rear discharge, Right hand cut blade

WHEEL HORSE - see TORO / WHEEL HORSE

WHITE - see MTDWOODS

320-545 70014 15 1/2 none none 2 .203

(3) for 44″ cut, standard lift blade.

345-751 5081 5081KT

16-3/4 5/8 none none 1-3/4 .203

(3) for 48″ cut, Left hand cut blade, fi ts models FM48, FM842 and RM400. (While Quantities Last)

320-546 70104 70104KT

18 1/2 none none 2 .203

(3) for 52″ cut.


09-37


B B

320-550 70104 70117

18 1/2 none none 2-1/2 .240

(3) for 52” cut. Fits models: 3452, 6052, 6152, 9052, 9252, 9352, 9552, 9652 and 9852; requires 3 for 52” deck.



345-769 62346950 / KT

20-3/16 5/8 none none 2 .204

(3) for 60″ cut, model 59C2, medium lift.

345-777 23825 / KT31359 / KT

20-1/4 5/8 none none 2 .204

(3) for 60″ cut, Left hand cut blade, fi ts models RM500, F35 and RM59.

345-433 34615 34615KT

20-11/16 5/8 none none 2-1/2 .240

(3) for 60″ cut, High lift blade, fi ts new tunnel deck. Models RM360 and RM550, Heavy duty blade.

320-547 70134 21 1/2 none none 2-1/2 .250

(3) for 61″ cut, Heavy duty blade.



345-764 13404 / KT31306 / KT

24-1/2 1 none none 2-1/2 .204

(3) for 72″ cut, Left hand cut blade, fi ts models L306, RM306 and RM660. Heavy duty blade.

345-434 15127 / KT 24-11/16 5/8 none none 2-1/2 .240

(3) for 72″ cut, High lift blade, fi ts new tunnel deck. Models RM372 and RM660, Heavy duty blade.

YANMAR - see above WOODS listings

YARDMAN - see www.bantasaw.comYAZOO / KEES

350-603 206-660 20-3/4 3/4 X1-1/4


(3) for 60″ cut, Right hand cut blade. Heavy duty blade.

350-538 206-760 20-7/8 3/4 X1-1/4

5/16 3 2-1/4 .240

(3) for 60″ cut, Left hand cut blade. Heavy duty blade.

“BLADE by LENGTH CHART” starts on Page 09-39

WOODS continued

09-38


B B

375-378 Weedeater#92343 701557AYP# 85713

7 9/16D-Hole

S/4 SC 1-1/2 .095

Fits Weedeater models: 4000 and 4500. Left hand cut. Also fi ts AYP model 795535. (SHARPENED)

375-364 Multi- Application

7-11/16 1 NS SC 2 .125

Edger blade found on Echo, Green Machine, Ryobi, Shindaiwa, Stihl and many others. Fits Maruyama Trimmer / Edger, Green Machine & Echo Trimmer / Edger & Stihl FC 72 trimmer. Replaces: Echo# 720237001, Green Machine# 237001, Husqvarna# 601000749, Maruyama# 216062, McCulloch# 301272, Red Max# 636715110, Ryobi# 613223 / 613233R, Shindaiwa# 7295092110 and Stihl# 4133-713-4101, 4133-713-4102. Fits ECHO models: PAS2601, PE200, PE201, PE230, PE231, PE260, PE261, PE310, PE311, PE2000, PE2400, PE2601, PE3100. Fits STIHL models: FC72, FC75, FC85 and FC110. (UNSHARPENED, NON HEAT TREATED)

375-311 Universal 9 OD 1/2 4Star

9OD

13gauge

Curvature of blade prevents clogging.

375-089 John Deere#M47147

9 1/2 S/2 SC 2 .155

Fits #2 and #3 edgers. Heavy duty.This edger blade has a universal type centre hole, it will accept a 1/2″ round or 7/16″ square shaft.

375-316 MTD#781-0080 981-0080

9 5/8 NS RE3T 2-1/2 .095

Fits MTD edger models: 25B-550C000; 25B-550C029 (2008 and newer); 25B-550D200, 2008 and newer; 25B-550229 (2008 and newer); 25B-520J000 (2008 and newer); 25B-520J029 (2008 and newer); 25B-520K200 (2008 and newer).

375-403 Universal 10 1/2 S/4 AB & AC

2 .120

Angle Beveled Edger Blade.

375-022 Lesco# 050006050545

10 1/2 S/4 SC 2 .150

Mclane# 2059HD10 / Tanaka# 43533110200

Used on commercial edgers. Sharpened / 4 sides / straight cut edge.

375-162 UniversalLesco# 014222

10 1/2 S/2 SC 2 .149

050547 / Tanaka# 43533110200Sharpened / 2 sides / straight cut edge.

TypeS/2---------Sharpened, 2 SidesS/4---------Sharpened, 4 SidesNS---------------Not Sharpened

DesignSC------------Straight Cut EdgeRE3T ------------ Rounded Edges, 3 TeethAB ------------ Angle Beveled EdgeAC ------------ Angle Cut Edge

09-39

bblades - o.e.m replacementlades - o.e.m replacement

Documents