bcofd radio overview
DESCRIPTION
TRANSCRIPT
1 of 21
BALTIMORE COUNTY
Motorola Trunking Radio System Overview
2 of 21
Baltimore CoTrunking System
- Project 25 Compliant - Standards for digital
radio communications so agencies can communicate with mutual aid response teams in emergencies
- All Digital - Improves clarity & voice quality
- Simulcast System – Offers a larger coverage area
- Increased Frequency Availability Multiple Talkgroups/Channels per
entity Efficient use of frequencies
(Channels are only used when Talkgroup members are transmitting).
2 Zones - North - South 18 Tower Sites
- Nationwide Emergency Interoperability
Public Safety Nationwide frequencies
- Emergency Alerting Capability
- Voice Encryption (Secure)
3 of 21
North Simulcast Site (3 tower sites/12 channels) Route 439 Spook Hill Hereford (Prime Site)
South Simulcast Site (15 tower sites/24 channels)Arcadia MEMAWarren JacksonvilleRed Run Fire Headquarters (Prime Site)Hickey KingsvilleHighway Shop 2 EssexAllender CatonsvilleNorth Point Brady AvenueSparrows Point
Backup Prime Site for Both the North & South Simulcast system Gilroy
BALTIMORE COUNTY TOWER SITE LOCATIONS
4 of 21
THE NEW P25 SYSTEM
Digital Trunking– A digital radio transmitter processes sounds into
patterns of numbers, or "digits" – Frequencies are pooled and assigned when the radio
user presses the PTT button – Advantages – Users have access to more Talkgroups/Channels– Utilizes idle frequencies and frequencies are
available to all users
5 of 21
TRUNKING
In two-way radio communications, Trunking refers to the automatic and dynamic sharing of a small number of radio channels among a large number of radio users.
A Trunking System efficiently distributes message traffic across the available channels and reduces wait time for those channels.
6 of 21
Talkgroup APolice
1 23 4 5
Trunking allows individual users to be combined into Talkgroups.
A TALKGROUP is a group of users that have a common need to communicate with each other in order to accomplish their job.
Talkgroups
Talkgroup BFire/EMS
7 of 21
The Motorola Trunked radio system uses a computer
called the Zone Controller as an “operator”.
The Zone Controller has 2 PRIMARY DUTIES:
FIRST, to insure that only radios programmed for your
specific Trunking system are used on the network.
SECONDLY, to maintain and distribute the frequencies
or channels on the network.
Zone Controller
8 of 21
Control Channel
One of the frequencies/channels at each tower site is programmed tooperate as the CONTROL CHANNEL.
• The Control Channel’s job is to keep track of the radios affiliated with each tower and know which Talkgroup/Channel is selected on the radio.
• If I turn the Talkgroup/Channel selector one click, my radio sendstwo messages to the control channel. “I am leaving thisTalkgroup/Channel and I am arriving at the newly selectedTalkgroup/Channel”.
• The Control Channel carries only data and cannot be used for voice communications.
9 of 21
When you turn your radio on, it affiliates with the network through the Control Channel on the site nearest your location. • When no one is transmitting on your selected Talkgroup/Channel, your radio is still “talking” to the Control Channel. (Note: This transmission is transparent to the user.) • Your radios may be programmed with “Talk Permit Tones”. You should not begin your transmission before you hear the tones.
Turning On Your Radio
10 of 21
Step 1:Step 1:
The following is an example of what occurs between the time you press the PTT (Push-to-Talk) button and the time you hear the Talk Permit Tones (less than ½ second).
In this example, Channel 1 is the Control Channel and Channels 2 through 5 are voice channels.
When you press the PTT button, the Control Channel receives the request and forwards the request to the Zone Controller that a radio is on. Talkgroup/Channel “B” wants to talk to all other users on the system selected to the same Talkgroup/Channel.
Call Processing Event Sequence
11 of 21
The Zone Controller then communicates with the Control Channel at every tower and asks if they have any radios turned to Talkgroup/Channel “B” affiliated on their site.
Based on the replies from the Control Channels, the Zone Controller reaches into the pool and chooses a specific frequency for the transmission. In our example, this is Channel 5.
The Zone Controller then sends a message to all of the Control Channels that if they have any users selected to Talkgroup/Channel “B”, they should send those users to Channel 5.
Step 2:Step 2:
Step 3:Step 3:
Step 4:Step 4:
Step 4Step 4
Call Processing Event Sequence (Con’t)
12 of 21
All radios monitoring the Control Channel receive this message and travel over to Channel 5.
Step 5:Step 5:
Voice
Call Processing Event Sequence (Con’t)
13 of 21
Step 6:Step 6:• When the transmission is completed, all of the radios selected to Talkgroup/Channel “B” automatically return to the Control Channel. • The previously assigned voice channel returns to the pool and is available for other transmissions. (NOTE: This process may occur multiple times during a conversation and is transparent to the radio users.)
• The radio user never knows what specific frequency they are transmitting on and they don’t care. They are primarily concerned that they can transmit to and receive from other radio users selected to the same Talkgroup/Channel.
Voice
The Zone Controller promises the radio users that
if they are selected to the same Talkgroup/Channel
and affiliated with any tower on the system, they will be able to communicate with
each other.
Step 6:Step 6:
Call Processing Event Sequence (Con’t)
14 of 21
Trunking systems are designed or sized based on the concept that:• It is highly improbable that a large number of users will want to transmit at
exactly the same time.It is important to remember that whether you have two radios or 200
radios selected to the same Talkgroup/Channel, they only use one frequency.• And that most conversations are relatively short.
– The system has a “Time out Timer” set to 30 seconds. If you have the PTT pressed continuously for 26 seconds, you will begin to hear a dull tone. At 30 seconds, the Zone Controller will take the channel away from you. Your transmission will no longer be heard and you must release the PTT and press it again for the radio to
receive a new channel assignment.
Trunking System Design
15 of 21
The first tone is a “Talkgroup/Channel Busy”
What is a “Talkgroup/Channel Busy”?
When a radio user attempts to key up their radio and the Talkgroup/Channel where they are selected is already transmitting (i.e.“talkover” another user), they will receive a “Talkgroup/Channel Busy” prohibit tone.
There are two types of “Busy” tones that you may receive on the trunking system.
Trunking System Design (Con’t)
16 of 21
What should I do if I hear a “Talkgroup/Channel Busy” tone?
• Release the PTT button and listen for other transmissions.• When the transmission ends, press the PTT button, wait
for the “Talk Permit” tones then begin transmitting. NOTE: The radios also “hang” around on the channel for a few secondsafter the user releases the PTT. During this “hang time” no transmission is heard.
• If this occurs, wait a few seconds and press the PTT.Also,
You will hear the same tone when you are out of range of the trunking system. In this case, in addition to the tone, an “OUT OF RANGE” message will appear on the display of your radio.
Trunking System Design (Con’t)
17 of 21
The second tone is a “System Busy” tone
What is a “System Busy” tone?
If the radio user presses the PTT and no channels are available for assignment, the user will receive a “System Busy” tone.
What should I do if I receive a “System Busy” tone? • Release the PTT button and wait for the three quick Talk Permit
Tones. Within three seconds of hearing these tones, press and hold the
PTT button to transmit your message. NOTE: After receiving the Talk Permit Tones, the radio user must press the PTT within three seconds or the channel will be reassigned to the next user in the queue.
Trunking System Design (Con’t)
18 of 21
Trunking Systems contain many layers of redundancy or “back-up” to ensure that communications continue even in extreme situations.
Back-up modes that are transparent to the radio user are:
• Rotation of Control Channels
• Repeater “skipped” if off the air
• Redundant communication methods
connecting infrastructure
Back-up modes that are visible to the radio user are:
• Site Trunking
• Failsoft
Introduction to Radio System Back-up Modes
19 of 21
Site Trunking - The Zone Controller has lost communications with the Site(s).
How does this affect the radio user?
• Radios operate as they would in a normal Trunking environment• The radio will display “Site Trunking”• You will have PTT tones• You will still be able to communicate with users in your Zone
(you will not be able to communicate with users in other Zones)• Your EMERGENCY button will work, but may not be displayed on
the console in the Dispatch Center• Communication with your Dispatch Center may be limited
Site Trunking
20 of 21
Examples of Major Failures:• Both Zone Controllers Fail• All Four Control Channels Fail• All Voice Channels FailWhat happens to the radios in Failsoft?• Radios operate as they would on a conventional repeater system• Each channel is mapped to a specific frequency• A low level alert tone is broadcast every 10 seconds • “FAILSOFT” is displayed on the radio• PTT Tones are not available• You will hear transmissions from multiple Talkgroups on your Channel• The Emergency button functionality is not availableWhat should the radio user do?• If you are on the Talkgroup/Channel where you should be assigned, leave the radio where it is selected and listen for transmissions. • If not, you should select the Talkgroup/Channel where you should be assigned and listen
for transmissions.
Failsoft at the Zone Level – The Zone Controller has failed.(This occurrence is extremely rare.)
Failsoft
21 of 21
Examples of Major Failures:• Both Zone Controllers Fail• All Four Control Channels Fail• All Voice Channels FailWhat happens to the radios in Failsoft?• Radios operate as they would on a conventional repeater system• Each channel is mapped to a specific frequency• A low level alert tone is broadcast every 10 seconds • “FAILSOFT” is displayed on the radio• PTT Tones are not available• You will hear transmissions from multiple Talkgroups on your Channel• The Emergency button functionality is not availableWhat should the radio user do?• If you are on the Talkgroup/Channel where you should be assigned, leave the radio where it is selected and listen for transmissions. • If not, you should select the Talkgroup/Channel where you should be assigned and listen for
transmissions.
Failsoft at the Zone Level – The Zone Controller has failed.(This occurrence is extremely rare.)
Failsoft