bdp-bx1/s350 - philips pdf file9-883-989-12 2008h0500-1 ... bdp-bx1/s350 aep model uk model...

Click here to load reader

Post on 10-Apr-2018

251 views

Category:

Documents

7 download

Embed Size (px)

TRANSCRIPT

  • Sony CorporationVideo Business Group

    SERVICE MANUAL

    9-883-989-12

    2008H0500-1 2008.8

    Published by Quality Assurance Dept.

    BLU-RAY DISC/DVD PLAYER

    Ver. 1.1 2008.08

    BDP-BX1/S350RMT-B102A/B102P/B103A

    SPECIFICATIONS

    US ModelCanadian Model

    BDP-BX1/S350

    AEP ModelUK Model

    Australian ModelBDP-S350

    Photo: BDP-S350

    TM

    SystemLaser: Semiconductor laser

    Inputs and outputs(Jack name:

    Jack type/Output level/Load impedance)LINE OUT R-AUDIO-L:

    Phono jack/2 Vrms/10 kilohmsDIGITAL OUT (OPTICAL):

    Optical output jack/18 dBm(wave length 660 nm)

    DIGITAL OUT (COAXIAL):Phono jack/0.5 Vp-p/75 ohms

    HDMI OUT:HDMI 19-pin standard connector

    COMPONENT VIDEO OUT(Y, PB, PR) (US, Canadian):

    Phono jack/Y: 1.0 Vp-p/PB, PR: 0.7 Vp-p/75 ohms

    (Y, PB/CB, PR/CR) (AEP, UK, Australian):Phono jack/Y: 1.0 Vp-p/PB/CB, PR/CR: 0.7Vp-p/75ohms

    LINE OUT VIDEO:Phono jack/1.0 Vp-p/75 ohms

    LINE OUT S VIDEO:4-pin mini DIN/

    4-pin mini DIN/

    Y: 1.0Vp-p, C: 0.286Vp-p/75ohms(US, Canadian)

    Y: 1.0Vp-p, C: 0.3Vp-p/75ohms(AEP, UK, Australian)

    LAN (100):100BASE-TX Terminal

    EXT:External memory slot (For connecting theexternal memory)DC output: 5 V 500 mA Max

    GeneralPower requirements:

    120V AC, 60Hz (US, Canadian)220240 V AC, 50/60Hz (AEP, UK, Australian)

    Power consumption:26 W

    Dimensions (approx.):430 mm 220 mm 60 mm(17 in. 8 3/4 in. 2 3/8 in.)(width/depth/height) incl. projecting parts

    Mass (approx.):2.9 kg (6 3/8 lb)

    Operating temperature:5 C to 35 C (41 F to 95 F)

    Operating humidity:25 % to 80 %

    Supplied accessories

    Specifications and design are subject tochange without notice.

    Audio/video cable (phono plug 3) (1)AC power cord (1)

    Remote commander (remote) (1)Size AA (R6) batteries (2)

    HDMI cable (1) (BDP-BX1)

  • BDP-BX1/S350

    SAFETY CHECK-OUT

    LEAKAGE TESTThe AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes). Leakage current can be measured by any one of three methods.1. A commercial leakage tester, such as the Simpson 229 or RCA

    WT-540A. Follow the manufacturers' instructions to use these instruments.

    2. A battery-operated AC milliammeter. The Data Precision 245 digital multimeter is suitable for this job.

    3. Measuring the voltage drop across a resistor by means of a VOM or battery-operated AC voltmeter. The limit indication is 0.75V, so analog meters must have an accurate low-voltage scale. The Simpson 250 and Sanwa SH-63Trd are examples of a passive VOM that is suitable. Nearly all battery operated digital multimeters that have a 2V AC range are suitable. (See Fig. A)

    1. Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and bridges.

    2. Check the interboard wiring to ensure that no wires are pinched or contact high-wattage resistors.

    3. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement.

    4. Look for parts which, though functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement.

    5. Check the line cord for cracks and abrasion. Recommend the replacement of any such line cord to the customer.

    6. Check the B+ voltage to see it is at the values specified.7. Check the antenna terminals, metal trim, metallized knobs,

    screws, and all other exposed metal parts for AC leakage. Check leakage as described below.

    After correcting the original service problem, perform the following safety checks before releasing the set to the customer:

    1.5 k0.15 FACvoltmeter(0.75 V)

    To Exposed MetalParts on Set

    Earth Ground

    Fig. A. Using an AC voltmeter to check AC leakage.

    WARNING!!WHEN SERVICING, DO NOT APPROACH THE LASER EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO CONFIRM LASER BEAM EMISSION, BE SURE TO OBSERVE FROM A DISTANCE OF MORE THAN 25 cm FROM THE SURFACE OF THE OBJEC-TIVE LENS ON THE OPTICAL PICK-UP BLOCK.

    SAFETY-RELATED COMPONENT WARNING!!

    COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

    ATTENTION AU COMPOSANT AYANT RAPPORT LA SCURIT!

    LES COMPOSANTS IDENTIFIS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHMATIQUES ET LA LISTE DES PICES SONT CRITIQUES POUR LA SCURIT DE FONCTIONNEMENT. NE REMPLACER CES COM- POSANTS QUE PAR DES PICES SONY DONT LES NUMROS SONT DONNS DANS CE MANUEL OU DANS LES SUPPL-MENTS PUBLIS PAR SONY.

    Unleaded solderBoards requiring use of unleaded solder are printed with the lead-free mark (LF) indicating the solder contains no lead.(Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.)

    : LEAD FREE MARKUnleaded solder has the following characteristics. Unleaded solder melts at a temperature about 40C higher than

    ordinary solder. Ordinary soldering irons can be used but the iron tip has to be

    applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to

    about 350C. Caution: The printed pattern (copper foil) may peel away if the

    heated tip is applied for too long, so be careful! Strong viscosity Unleaded solder is more viscous (sticky, less prone to flow) than

    ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc.

    Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may

    also be added to ordinary solder.

    CAUTION:The use of optical instrument with this product will increase eye hazard.

    CAUTIONUse of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radia-tion exposure.

    2

    WARNINGTo reduce the risk of fire or electricshock, do not expose this apparatusto rain or moisture.To avoid electrical shock, do notopen the cabinet. Refer servicing toqualified personnel only.

    Batteries or batteries installedapparatus shall not be exposed toexcessive heat such as sunshine,fire or the like.

    CAUTIONThe use of optical instruments withthis product will increase eyehazard. As the laser beam used inthis Blu-ray Disc/DVD player isharmful to eyes, do not attempt todisassemble the cabinet.Refer servicing to qualifiedpersonnel only.

    This label is located on the laserprotective housing inside theenclosure.

    This appliance is classified as aCLASS 1 LASER product. TheCLASS 1 LASER PRODUCTMARKING is located on the laserprotective housing inside theenclosure. (AEP, UK, Australian)

    Notice for customers in theUnited Kingdom andRepublic of IrelandA molded plug complying withBS1363 is fitted to this equipmentfor your safety and convenience.Should the fuse in the plugsupplied need to be replaced, a 5AMP fuse approved by ASTA orBSI to BS1362, (i.e., marked with

    or mark) must be used.If the plug supplied with thisequipment has a detachable fusecover, be sure to attach the fusecover after you change the fuse.Never use the plug without the fusecover. If you should lose the fusecover, please contact your nearestSony service station.

    Disposal of Old Electrical& Electronic Equipment(Applicable in theEuropean Union andother European countrieswith separate collectionsystems)This symbol on the product or onits packaging indicates that thisproduct shall not be treated ashousehold waste. Instead it shall behanded over to the applicablecollection point for the recycling ofelectrical and electronicequipment. By ensuring thisproduct is disposed of correctly,you will help prevent potentialnegative consequences for theenvironment and human health,which could otherwise be causedby inappropriate waste handling ofthis product. The recycling ofmaterials will help to conservenatural resources. For moredetailed information aboutrecycling of this product, pleasecontact your local Civic Office,your household waste disposalservice or the shop where youpurchased the product.

    Disposal of wastebatteries (applicable inthe European Union andother European countrieswith separate collectionsystems)This symbol on the battery or onthe packaging indicates that thebattery provided with this productshall not be treated as householdwaste.By ensuring these batteries aredisposed of correctly, you will helpprevent potentially negativeconsequences for the environmentand human health which couldotherwise be caused byinappropriate waste handling of thebattery. The recycling of thematerials will help to conservenatural resources.

    In case of products that for safety,performance or data integrityreasons require a permanentconnection with an incorporatedbattery, this battery should bereplaced by qualified service staffonly.To ensure that the battery will betreated properly, hand over theproduct at end-of-life to theapplicable collection point for therecycling of electrical andelectronic equipment.

    For all other batteries, please viewthe section on how to remove thebattery from the product safely.Hand the battery over to theapplicable collection point for therecycling of waste batteries.

    For more detailed informationabout recycling of this product orbattery, please contact your localCivic Office, your house