be wise, be connected


WiseConn Engineering Inc. / Catalog - Components and Accessories 2.30.0.D. All rights reserved. Developed for WiseConn, distributors, partners, engineering companies, educational organizations, research and any other related companies. For more information, contact your local WiseConn representative or distributor.

4

EXP-232-MB Serial RS-232 Expansion Card

EXP-485-MB Serial RS-485 Expansion Card

EXP-2DI 2X Digital Inputs Expansion Card

EXP-SDI12 SDI12 - Serial Data Interface Expansion Card (at 1200 Baud)

22

22

22

22

EXPANSION CARDS FOR RF-X1

EXP-3AI 3X 0 to 3V Analog Inputs Expansion Card

EXP-3X420 3X 4 to 20mA Analog Inputs Expansion Card

EXP-HMI HMI Interface/5V feed Expansion Card

23

23

23

24

24

24

EXP-LATCH 1X Latch Output, 1X Digital Input Expansion Card

EXP-RELAY-LA 1X Relay Output, 1X Digital Input Expansion Card

EXP-4LATCH 4X Latch Outputs, 1X Digital Input Expansion Card

23EXP-SHT SHT Expansion Card (Temp/Hum)

RF-M1-900HP Field monitoring node with Digi XBee Pro Module - 900MHz 10

COMPONENTS

INTRODUCTION

RF-X1-900HP Field monitoring and control node with Digi XBee Pro Module - 900MHz 16

Service Plans Content plans for WOS or DropControl users. 6

PAGECODE DESCRIPTION



PAGEDESCRIPTION

NODES AND EXPANSION CARDS

INDEX

RF-M1-LTE-A Field monitoring node with Modem XBee3 Cellular LTE-M

RF-X1-LTE-A Field monitoring and control node with Modem XBee3 Cellular LTE-M 16

RF-X1-LTE-V Field monitoring and control node with Modem XBee3 Cellular LTE-M 16

10

RF-C1-900HP Fertigation controlling node with Digi XBee Pro Module - 900MHz 28


RF-M1-LTE-V Field monitoring node with Modem XBee3 Cellular LTE-M 10

Fertigation controlling node with Digi XBee Pro Module - 900MHzand Modem XBee3 Cellular LTE-M

28RF-C1-900HP-LTE-A

RF-C1-900HP-LTE-VFertigation controlling node with Digi XBee Pro Module - 900MHzand Modem XBee3 Cellular LTE-M

28

5

ACC-ENERGY-SOLAR-1010 [W] Solar Panel for RF-X1, RF-C1 and RF-M1 nodes. Includes mounting bracket and 24 ft. cable

ACC-ENERGY-PS-110-5-2 5VDC 2A power source for RF-X1/RF-M1 Nodes

ACC-ENERGY-PS-110-24-3 24VDC 3A power source for RF-C1 Nodes

38

38

38

BATTERY, SOLAR PANEL AND POWER SUPPLY ACCESSORIES

ANTENNAS

ANTENNA EXTENSIONS, COAXIAL CABLES, AND LIGHTNING ARRESTER ACCESSORIES

EXPANSION MODULES FOR RF-C1

ACCESSORIES

ACC-PM-X1 X1 power management card 39




ACC-ANT-900-OM22dBi SMA connector omnidirectional antenna included in RF-X1/RF-C1/RF-M1

6dBi N connector omnidirectional outdoor antenna w/brackets and 20 ft. SMA to N cable (Radio High Gain)

3dBi external cellular omnidirectional antenna for modems 40

39

39

ACC-ANT-CELL-OM3

7dBi N connector cellular omnidirectional outdoor antenna w/brackets and 20 ft. SMA to N cable for modems (Cellular High Gain) 40ACC-ANT-CELL-OM7

ACC-ANT-900-OM6-COAX-20FT

915 MHz ISM bandpass filter for XBee 900HP radios. 40ACC-ANT-FILTER


41

41

41SMA to SMA extension cable for antennaACC-ANT-EXT-RF-_FT

Extension Cable Antenna 25/39 ft., SMA-N, with stand,for ACC-ANT-900-OM6.

ACC-ANT-EXT-RF-SMA-N-_FT

Lightning arrester with 4 ft. extension cableACC-COAX-LFUSE-OM2

MOD-C1-10R-10DI Expansion module for RF-C1 that provides 10 relay outputs 32

MOD-C1-12LATCH Expansion module for RF-C1 that provides 12 Latch outputs 32

ACC-ENERGY-BATT-4-13 3.7 [V] and 13 [Ah] Lithium Ion Battery for RF-X1, RF-C1 and RF-M1 nodes 38

RF-C1-LTE-A Fertigation controlling node with Modem XBee3 Cellular LTE-M 28


RF-C1-LTE-V Fertigation controlling node with Modem XBee3 Cellular LTE-M 28

4dBi SMA connector omnidirectional antenna included in RF-C1-GW/ RF-M1-LTE/3G 40ACC-ANT-CELL-OM4

INTRODUCTION | CATALOG

6


77

Our patented technology allows farm and irrigation managers to wirelessly monitor, control, and automate irrigation systems online in order to increase revenue, decrease expenses, and to help manage time.

Our flagship products, the WiseConn X1, M1, and C1 Nodes continuously communicate and independently

WISECONN’S TECHNOLOGYcollaborate in a wireless mesh network to monitor a wide array of field sensors and operate and control irrigation systems.

With displayed information provided by field sensors, the WiseConn “Hydraulic Logic” field intelligence allows you to create and perform precise irrigation and fertigation schedules with

confidence and run-verification. With over 6,000 nodes operating in the Western Hemisphere and over a decade of hardware engineering and software development, these powerful devices have been field-tested, helping several hundred farm operations, large and small, to safely and efficiently manage water and fertilizer distribution.

X1RF-M1Field monitoringnode

RF-X1-GWField monitoring and

control gateway node

WiseConn ServersBased in Amazon

Web Services

DropControl AppMobile and desktop appwww.dropcontrol.com

Weatherstation

Soil moistureprobe

C1RF-C1Fertigation

controlling node

Temperaturesensor


8

Web Visualization - Configuration and Support- 98% Availability

Lowercase

- Configuration and Support- Basic Daily Monitoring

Tables

- Start / Stop- Basic Daily Monitoring

Tables

- Schedule Future Programs- Downloadable Reports

- Interactive Daily Monitoring Graphs

- Complete Dashboard

Storage 6 months 6 months Forever Forever

Number of Multi-profile Users 0 0 2 4 1

Number of Advisor Profile Users 0 0 0 1

Expected Web Platform Uptime 98% 90% 95% 98%

Data Availability 98% 90% 95% 98%

Alerts According to Integrator No - Emails- No Notifications

- No SMS- No Calls

- ∞ Emails- ∞ Notifications

- 50 SMS- 20 Calls

Control According to Version Remote Start / Stop(Without Programming)

Remote Start / Stop(Without Programming)

Advanced Irrigation and Fertigation

Updates Basic Security and Bugs. API Connector Upgrades

Safety Basicsand Bugs

All All

AWS Secure Backup Yes No No Yes

Remote Phone Support Yes No Yes Yes

Remote Emergency Telephone Support

No No No Extended Schedule

Creating Variables and Formulas No No No Yes

Special Mobile Site No No No DropControl Mobile App

Download Reports No No No Yes

Download Data Excel .xls Excel .xls Excel .xls Excel .xls

Basic API for Data Access According to Version Monthly Fee Per Key Monthly Fee Per Key ∞ Users 2

Full Control API According to Version No No 1 User 2

Volume Discount 0% 0% 0% > 100/25 Nodes -> 10%> 250/100 Nodes -> 15%

> 1000/500 Nodes -> 20%

Limit Questions / Day / Variable 1500/day - - -

Query Size Limit 30 days - - -

SERVICE PLANSWiseconn offers two different SaaS platforms: WOS, a basic visualization platform, and DropControl, an agricultural irrigation platform specially designed for farmers to manage all actions and sensors, and schedule irrigations through the web-based platform, or mobile app. All equipment comes with a Free Plan for life. You can also upgrade to plans with higher benefits, up to the Expert Plan, that includes usage of the DropControl mobile app with higher benefits up to the Expert Plan that include the DropControl mobile and web application.

At least one node will be charged for service / M2M plan not included / WiseConn has multicarrier options and alternatives / Switches as valve validation are not charged for service.

1 - Buy as an additional user2 - Sell as an additional user

API PLAN FREE PLAN SIMPLE PLAN EXPERT

wos +

woswos wos


9

COMPONENTS Nodes, Modules, and Expansion Cards

COMPONENTS | CATALOG

10


11

DROPCONTROL FAMILY

Field MonitoringNode

Fertigation Control Node

Field Monitoring and Control Node

Mon

itoring

Irrigation

Con

trolA

dvan

ced Fertig

ation


12

Field Monitoring NodeThe M1 Field Monitoring Node is suitable for simple monitoring tasks as part of the DropControl network or on its own. It has a combination of inputs that allow you to monitor multiple devices, enabling data access in real-time and safe storage in the Cloud.


13

DROPCONTROL TECHNOLOGY

DEVICE FEATURES

APPLICATIONS

SPECIFICATIONS

Suitable for simple monitoring tasks & compatible with the DropControl family

• Collaborative wireless networks with 2 miles line-of-sight between nodes. • 4G / LTE cellular connection to the cloud for

synchronization.*• Solar-powered with low power consumption• Wide variety of sensors and compatible accessories.

* Restrictions apply depending on each country, consult with your local distributor.

• RF mesh networks or cellular communication.• IP65 external protection.• Autonomous energy, solar + battery.• Firmware updates via cloud software. • Support personnel set configurations and help

monitor the farm status via WOS & DropControl applications.

• Compatible with other WiseConn RF units.

• Agroclimatic variables: humidity, precipitation, temperature, wind, and radiation.

• Soil and plant health variables• Irrigation sensors: flow, pressure, and electrical

variables.• Industrial sensors with communication 4..20mA;

serial 232 or 485.

Cortex M4-F (32 bit STM32L4)

64MB Flash. 1 Year of data, up to 18 sensors every 15 minutes

5.9 x 7.9 x 3.9 [in]

2.4 [lbs]

IP65 outdoor rugged UV resistant poly -carbonate enclosure

• 20mAh idle average power draw without sensors

• 10W, 5V solar panel, 14x1x0.7 [in]• 13,000mAh Lithium-ion battery pack

• 1x Serial RS232 / RS485 (MODBUS ena-bled)

• 1x SDI12• 4x Opto-coupled Inputs (9-28V)• 2x Analog inputs (differentials) - 0-5V - 0-10V - 4-20mA

Processor

Local storage

Dimensions

Weight

Enclosure

Synchronization Power

Input-Output options

• Local RF synchronization every 5 seconds

• Sending data to the cloud every 15 minutes (can be as low as 1 minute)

INPUTS

• 1 RS232 or RS485 Serial Port• 1 SDI12 Port• 4 digital inputs• 2 analog inputs


14

PCB-BU-M1M1 Central unitA

ACC-ENERGY-BATT-4-133.7 [VDC] - 13 [Ah] Ion lithium batteryB

ACC-ENERGY-SOLAR-10Solar panel 10[W] - 5[VDC] C

ACC-ANT-900-OM22 [dBi] Omnidirectional antenna with SMA connectionD

BU-RF-900HPXbee Pro Digimesh 900HPE

-Solar Panel ConnectorF

Polycarbonate enclosure 5.9 x 7.9 x 3.9[in] 1G

Mounting chassis, case-fixing screws and supports for BU - M1 with plate and its screws

-H

T Bracket for node mounting 2I

8” UFL-SMA Pigtail 1J

PG9 Cable glands 3K

1

1

1

1

1

1

-

PG21 Cable gland 1L

Solar Panel mounting bracket 1M

RF-M1

Battery

Ext. Power

LEDs ON

Factory

ON

OFF

Channel

BAT

USB

JP1

FG

F2 F4 F6 F8

BU-M1 R0018Ingeniería WiseConn S.A.

Ext.Power

SerialV ATx BRx SDI GND

Digital InputsV 1 2 3 4 C GND

AnalogV1 1+ 1- GND

Analog

V2 2+ 2- GND

Power

RF Link

One Line

J1

J2

RF-1

B

A

F

I

E

J

G

H

K

D

L

C

M

ACC-ENC-X1-5.9x7.9

ACC-MOUNT-NODE-T

ACC-ANT-EXT-CELL-UFL

ACC-ENC-PG9-CGLAND

ACC-ENC-PG21-CGLAND

ACC-MOUNT-SOLAR

Front view example of a RF-M1-900HP node

Front view example of solar

panel

ID DESCRIPTION Q CODE


15

VERSIONS

Modem XBee3 Cellular LTE-M (with microSIM)• Standard: LTE-M• Cellular Antenna for 700-2700Mhz 4G LTE 2dBi (Monopole) • Modem Certifications: FCC, GCF, PTCRB, Verizon, CE

Modem XBee3 Cellular LTE M (with microSIM)• Standard: LTE M• Cellular Antenna for 700-2700Mhz 4G LTE 2dBi (Monopole) • Modem Certifications: FCC, GCF, PTCRB, AT&T, CE

Digi XBee Pro Module - 900MHz - FHSS modulation - 250mW (+ 24dBm)• Male connector for RP-SMA antenna• 2dBi antenna included (2 miles LoS range)• 10 bit DIP switch channel selection• Xbee Certifications: FCC, IC, RoHs, ANATEL, IFETEL, IDA

RF-M1-900HP

RF-M1-LTE-A

RF-M1-LTE-V


16

COMPATIBLE SENSORS TABLE

Variable Model - Sensor Brand Type / Dimensions / Comms RF-M1

Precipitation Davis Instruments - 7852 / 7857 Tipping bucket / 0.2mm / dry contact 4

Wind Direction and Speed Davis Instruments - 7911 Potentiometer and reed switch / ° and 1m / s / analog and digital

2

Solar radiation Davis Instruments - 6450 Total radiation / W / m2 / Voltage 2

Temperature and Humidity PCE - P18-1 RS485 1

Weather Station Spectrum Technologies - Watchdog 2900ET RS232 1

Weather Station Davis Instruments - Vantage Pro 2 Talk RS485 1

Weather Station Davis Instruments - Vantage Pro 2 Envoy RS485 1

Soil moisture Sentek - EnviroScan FDR / % / SDI12 RS232 RS485 1 2

Soil moisture Sentek - Drill&Drop FDR / % / SDI12 RS232 RS485 1 2

Soil moisture EnviroPro - EP100G / EP100GL FDR / % / SDI12 1 3

Soil moisture AquaCheck - Classic / Subsurface FDR / % / SDI12 1 4

Soil moisture Decagon -Teros12 FDR / % / SDI12 3

Soil moisture Decagon - GS3 TDR / % / SDI12 3

Soil moisture Decagon - 5TE TDR / % / SDI12 3

Soil moisture Hydrascout - HSTI SDI12 1

Pressure Detector Generic 1 Pressure switch / 10, 5 or 3 PSI / Dry contact 4 5

Pressure Detector WiseConn Pressure switch / 10, 5 or 3 PSI / Dry contact 4 5

Level Detector Dry contact level switch - Generic 1 Level switch / Dry contact 4 5

Irrigation Volume Volume pulse emitter - Generic 1 Dry contact 4 5

Irrigation Volume Bermad - TurboIR Dry contact 4 5

Irrigation Volume Bermad - Turbo Bar E Dry contact 4 5

Irrigation Volume Arad - SF15 Dry contact 4 5

Irrigation Volume Wellford Dry contact 4 5

Irrigation Volume Seametrics - AG300 Dry contact 4 5



Irrigation Volume McCrometer - McPropeller Dry contact 4 5

Irrigation Volume McCrometer - Mc Mag3000 Dry contact 4 5

Water pressure Generic 1 4..20mA 2 5

Water pressure Konics - TPS20 4..20mA 2 5

Water pressure Danfoss - MBS3000 4..20mA 2 5

Water pressure Danfoss - MBS1700 4..20mA 2 5

Water pressure Transducers Direct - TD1000 4..20mA 2 5

WEA

THER

SOIL

Temperature Dynamax - SAP IP-IRT Ambient and object temperature / SDI12 1

Fruit Diameter Phyto-Sensors - FI-MMi 4..20mA 2

Fruit Diameter Ecomatik - Dendrometer DF Voltage 2

Outbreak Diameter Ecomatik - Dendrometer DD-S Voltage 2

Leaf humidity Decagon Leaf wetness sensor Voltage 2

Leaf humidity Davis Leaf wetness 6420 Voltage 2PLA

NT

IRR

IGA

TIO

N


17

IRR

IGA

TIO

N

Water pressure Transducers Direct - TDH33 4..20mA 2 5

Water pressure Schneider Electric - XMLK100P2D23 4..20mA 2 5

Water table for wells Generic 1 4..20mA 2 5

Water table for wells Flux - 26Y 4..20mA 2 5

Reservoir or canal water level Dinel - HLM-16N Water column pressure / 1 to 200m / 4..20mA 2 5

Reservoir or canal water level Dinel - ULM-53N Ultrasound / 0.25 to 10m / 4..20mA 2 5

Reservoir or canal water level Seametrics - PS98i 4..20mA 2 5

Reservoir or canal water level Eno Scientific - Well Watch 700 4..20mA 2 5

Water pH Global Water - WQ201B 4..20mA 2 5

Water pH Ponsel - PPHRB pH - Redox - Temperature / SDI12 1

Water conductivity Ponsel - PC4EB CE - Salinity - Temperature - TDS-KCl / SDI12 1

Water pH and conductivity EMEC - pH&EC Controller LDPHCDPLUS 4..20mA 1


Variable Model - Sensor Brand Type / Dimensions / Comms RF-M1

1. Ask for other sensors or generics2. 1 probe 36 sensors3. 1 probe 9 depths4. 1 probe 6 depths5. They cannot be part of irrigation events


18

The RF-X1 unit can control, monitor, and manage multiple agricultural processes in the field, such as pump stations, fertigation, valve control, and field monitoring. Its 5 expansion ports can manage multiple combinations of inputs and outputs. The mesh network technology links nodes in the field together and has the option to designate one as a gateway to the Cloud.

Field Monitoring and Control Node


19

SPECIFICATIONS

Processor MSP430F5438A, Microcontroller ultra-low consumption 16bit

Local storage 1GB micro SD industrial SLC

Dimensions 5.9 x 7.9 x 3.9 [in]

Weight 2.4 [lbs]

Enclosure IP65 outdoor rugged UV resistant polycarbonate enclosure

• Local RF sync time: 0.2 seconds• Sending data to the cloud every

15 minutes(can be as low as 1 minute)

• Lag time for alarms and actions is 20 seconds max

PowerInput/Output options

5 Expansion Slots:• 4 regular• 1 dual regular/modem (for Gateway)

• 20mAh idle average power draw without sensors

• 10W, 5V solar panel, 14x1x0.7 [in]• 13,000mAh Lithium-ion battery pack

• Collaborative wireless network with 2 miles line-of-sight between nodes.

• 4G / LTE cellular connection to the cloud for synchronization.*

• Solar-powered with low power consumption• Wide variety of sensors and compatible accessories.• Patent-Pending Irrigation Management.

* Restrictions apply depending on each country, consult with your local distributor.


• 5 expansion slots with flexible inputs/outputs. • RF mesh networks + Cellular communication.• IP65 Enclosed Outdoor Protection.• Self-powered w/solar panel + battery.• Cloud-based scheduling, local control.• Cloud software upgrades, internet configurations,

and support.• Compatible with other WiseConn RF units.• FCC Compliant.

DEVICE FEATURES

• Valve control and monitoring.• Field monitoring on any open protocol sensor.• Pump control.• Fertigation control.• PID control.• Remote valve automation.

APPLICATIONS

Operate, monitor, and manage multiple agricultural processes in the field

Input-Output options


20

BU-X1X1 Central unitA

ACC-ENERGY-BATT-4-133.7 [VDC] - 13 [Ah] Ion lithium batteryB

ACC-ENERGY-SOLAR-10Solar panel 10[W] - 5[VDC] C

ACC-ANT-900-OM22 [dBi] Omnidirectional antenna with SMA connectionD

BU-RF-900HPXbee Pro Digimesh 900HPE

ACC-BU-FLASH1GB MicroSD Flash Memory, Industrial Grade (SLC)F

Polycarbonate enclosure 5.9 x 7.9 x 3.9[in] 1G

Mounting chassis, case-fixing screws and supports for BU - X1 -H

T Bracket for node mounting 2I

8” UFL-SMA Pigtail 1J

PG9 Cable glands 3K

1

1

1

1

1

1

ACC-ENC-X1-5.9x7.9

-

ACC-MOUNT-NODE-T

ACC-ANT-EXT-CELL-UFL

ACC-ENC-PG9-CGLAND

PG21 Cable gland 1L

Solar panel mounting bracket 1M

ACC-ENC-PG21-CGLAND

ACC-MOUNT-SOLAR

S

C

M

1 2 3 4 5

RF-X1

L

B

A

F

I

E

J

G

H

K

D

Front view example of a RF-X1-900HP node

Front view example of solar

panel



21


Modem XBee3 Cellular LTE M (with microSIM)• Standard: LTE M • Cellular Antenna for 700-2700Mhz 4G LTE 2dBi (Monopole) • Modem Certifications: FCC, GCF, PTCRB, AT&T, CE

Digi XBee Pro Module - 900MHz - FHSS modulation - 250mW (+ 24dBm)• Male connector for RP-SMA antenna• 2dBi antenna included (2 miles LoS range) • 10 bit DIP switch channel selection• Xbee Certifications: FCC, IC, RoHs, ANATEL, IFETEL, IDA

RF-X1-900HP

RF-X1-GW900HP-LTE-A

RF-X1-GW900HP-LTE-V

VERSIONS

GATEWAY GATEWAY


2222

Expansion Cards - EXPs – allow to setup the RF-X1 Node for the technical requirements of its operating location. The EXP allows the connection of all types of sensors and/or actuators.

The EXP is the connection medium from the X1 Nodes (devices) to the processes that it will perform. As shown in the diagram, an X1 Node can support multiple EXPs; likewise, an EXP can support one or several devices (each Expansion Card has its own restrictions).

The RF-X1 has 5 slots to connect the Expansion Cards to. These cards are selected according to the type of monitoring or control capability desired.

Expansion cards for RF-X1

EXPANSIONS


23

EXP-___Expansion CardA

B

1

- -0.4 [in] Spacer (1), nut (1), screw (1) and washer (1) for EXP installation and fastening with BU-X1

Expansion Cards includeID DESCRIPTION Q CODE


24

• It has 2 optocoupler inputs• Inputs operation range: 9V to 28V (AC/DC)• AC or DC input detection, Jumper selectable • Supply Voltage: 12Vdc• Maximum Current: 125mA• Ports: 12V, In1, In2, C, GND

* In cases where the voltage to be detected comes from an external supply, C (Common) must be used as reference.

Expansion card for X1 devices: It allows sampling of up to 2 sensors with 9V to 28V (AC or DC) discrete signals. Includes a 12 VDC pull-up resistor Input.

EXP-2DI 2X Digital Inputs Expansion Card

Features• SDI-12 Connection• Up to 3 devices in bus mode• Available voltages: 5Vdc , 12Vdc• Current: 350mA (total)

*Sensor’s electric current peaks must be considered in order to avoid damaging the card’s power supply.

Expansion card for X1 devices. It allows sampling of up to 3 instruments through SDI-12 interface.

EXP-SDI12 SDI12 - Serial Data Interface Expansion Card (at 1200 Baud)

Features

• RS-232 Serial Connection• Adaptable to any serial device• Output Voltage: +12VDC• Maximum Current: 250mA

Expansion card for X1 devices. It allows the connection of Modbus RS-232 Serial interface, enabling a bidirectional communication with expansion units, instrumentation, and other devices.

EXP-232-MBSerial RS-232 Expansion Card

Features

• RS-485 Serial Connection • Adaptable to any serial device• Output Voltage: +12VDC• Maximum Current: 250mA

Expansion card for X1 devices. It allows the connection of a RS-485 Serial interface, enabling a bidirectional communication with expansion units, instrumentation, and other devices.

EXP-485-MB RS-485 Serial Expansion Card

Features


25

• It has 3 analog inputs• Input Voltage Range: 0 to 3Vdc (ref. GND)• Output Voltage: 3Vdc or 12Vdc• Maximum Current: 1000mA at 3Vdc, 300mA at 12Vdc• Allows up to 3 devices with the same electrical characteristics

(same supply voltage)

Expansion card for X1 devices. It allows sampling of up to 3 analog interface sensors (of the same type or with common electrical specifications).

EXP-3AI 3X 0 to 3V Analog Inputs Expansion Card

Features

• Allows monitoring up to 3 4-20mA sensors • Voltages: 16V or 24V (jumper selectable)• Maximum Current: 150mA at 24V , 250mA at 16V • Allows 3 devices with the same electrical specifications (same

supply voltage). In case of connecting devices with different specifications, its 4-20mA signal must be isolated and floating (Passive Equipment).

Expansion card for X1 devices. It allows sampling of up to 3 4..20 mA interface sensors, instrumentation, and other devices.

EXP-3X420 3X 4 to 20mA Analog Inputs Expansion Card

Features

• TTL Serial Connection - HMI Module • Voltage: 5Vdc• Current : 400mA• (3.3V) TTL Communication

Expansion card for X1 devices. It enables the connection of the HMI Expansion Module - MOD-HMI-4. Also used to feed 5Vdc into sensors that require external power or batteries.

EXP-HMI HMI Interface/5V feed Expansion Card

Features• Allows connection to Sensirion SHT1X (10,11,15)• Ports: Vdd, Sck (clock), Gnd and Data • Supply voltage: 3V• Maximum Current: 10 mA

Expansion card for X1 devices. It allows sampling of Wiseconn’s temperature and humidity sensor.

EXP-SHT SHT Expansion Card (Temp/Hum)

Features


26

• It has 4 outputs for Latching Solenoid control and 1 digital input (dry contact)

• Allowed Solenoids: 2 or 3 wires, 2 or 3 ways• Output Capacitance: 4700uF - 15V• Maximum cable distance (to solenoid): 300 ft• Inputs voltage range: 9V to 28V (AC/DC)

4x Solenoid Latch Outputs with 1x Digital/Dry contact input (2 slots).

EXP-4LATCH4X Latch Outputs, 1X Digital Input Expansion Card

Features

• It has 1 output for Latching Solenoid control and 1 digital input (Dry contact)

• Allowed Solenoids: 2 or 3 wires, 2 or 3 ways• Output Capacitance: 4700uF - 15V• Maximum cable distance (to solenoid): 300 ft.• Inputs voltage range: 9V to 28V (AC/DC)

Expansion card for X1 devices that controls latching solenoids (2-3 wires & 2-3 ways) with a maximum operation voltage of 15V. It also includes a discrete input for the connection of a flowmeter with pulse emitters, or any device with a discrete output.

EXP-LATCH 1X Latch Output, 1X Digital Input Expansion Card

Features

• It has a 1 Latch Relay Type Output and one optocoupler Input (Dry contact)

• Relay commutation Maximum Voltage: 220 VDC / 125 VAC• Commutation Maximum Current: 2A • Commutation Maximum Power: 60W / 62.5VA ( 24V, 2A typical)• Output Voltage/Current: 12Vdc / 125mA Maximum• Input range: 9V to 28V (AC/DC)

Expansion card for X1 devices. It allows device control via relay, which, unlike the normal option (single relay), keeps the current state with no extra energy consumption for X1 modules. This ensures greater autonomy for the device with 60W (up to 220VDC & 125 VAC or 2A) of computation power. It includes discrete input for the connection of flowmeter with pulse emitter or any device with discrete interface, as well as providing 12Vdc output voltage.

EXP-RELAY-LA1X Relay Output, 1X Digital Input Expansion Card

Features


27


Variable Model - Sensor Brand

Type / Dimensions / Comms

RF-X1

EXP

-2D

I

EXP

-3A

I

EXP

-SD

I12

EXP

-485

EXP

-485

-MB

EXP

-232

EXP

-3X4

20

EXP

-REL

AY

EXP

-REL

AY-

LATC

H

EXP

-LA

TCH

EXP

-4LA

TCH

EXP

-SH

T

Precipitation Davis Instruments - 7852 / 7857

Tipping bucket / 0.2mm / dry contact

2

Wind Direction and Speed

Davis Instruments - 7911

Potentiometer and reed switch / ° and 1m / s / analog and digital

3

Solar radiation Instruments - 6450 Total radiation / W / m2 / Voltage

3

Temperature and Humidity

Meter Group (Decagon) - VP-4

SDI12 1


Generic1 SHT 1


PCE - P18-1 RS485 1

Weather Station Davis Instruments - Vantage Pro 2 Talk

RS485 1

Weather Station Davis Instruments - Vantage Pro 2 Envoy

RS485 1

Weather Station Vaisala WXT530 SDI12 1

WEA

THER

Soil moisture Sentek - EnviroScan FDR / % / SDI12 RS232 RS485 1 2 1 2 1 2

Soil moisture Sentek - Drill&Drop FDR / % / SDI12 RS232 RS485 1 2 1 2 1 2

Soil moisture EnviroPro - EP100G / EP100GL

FDR / % / SDI12 1 3

Soil moisture AquaCheck - Classic / Subsurface

FDR / % / SDI12 1 4

Soil moisture Decagon -Teros12 FDR / % / SDI12 3

Soil moisture Decagon - GS3 TDR / % / SDI12 3

Soil moisture Decagon - 5TE TDR / % / SDI12 3

Soil moisture Watermark - Irrometer 900M

Irrometer / -KPa / 232 1 5

Soil moisture Watermark - Irrometer 200SSV6

Irrometer / -KPa / Analog 3

Soil moisture Hydrascout - HSTI SDI12 1

SOIL

Temperature Dynamax - SAP IP-IRT Ambient and object temperature / SDI12

1

Fruit Diameter Phyto-Sensors - FI-MMi

4..20mA 3

Fruit Diameter Ecomatik - Dendrometer DF

Voltage 3

Outbreak Diameter Ecomatik - Dendrometer DD-S

Voltage 3

Leaf humidity Decagon Leaf wetness sensor

Voltage 3

Leaf humidity Davis Leaf wetness 6420

Voltage 3

PLA

NT

Pressure Detector Generic1 Pressure switch / 10, 5 or 3 PSI / Dry contact

2

Pressure Detector WiseConn Pressure switch / 10, 5 or 3 PSI / Dry contact

2

Level Detector Dry contact level switch - Generic1

Level switch / Dry contact 2

IRR

IGA

TIO

N


28

Irrigation Volume Volume pulse emitter- Generic1

Dry contact 2

Irrigation Volume Bermad - TurboIR Dry contact 2

Irrigation Volume Bermad - Turbo Bar E Dry contact 2

Irrigation Volume Arad - SF15 Dry contact 2

Irrigation Volume Wellford Dry contact 2

Irrigation Volume Seametrics - AG300 Dry contact 2

Irrigation Volume Seametrics - AG2000 Dry contact 2

Irrigation Volume Netafim - Octave Dry contact 2

Irrigation Volume McCrometer - McPropeller

Dry contact 2

Irrigation Volume McCrometer - Mc Mag3000

Dry contact 2

Water pressure Generic1 4..20mA 3

Water pressure Konics - TPS20 4..20mA 3

Water pressure Danfoss - MBS3000 4..20mA 3


Water pressure Seametrics - PS98i 4..20mA 3

Water pressure Transducers Direct - TD1000

4..20mA 3

Water pressure Transducers Direct - TDH33

4..20mA 3

Water pressure Schneider Electric - XMLK100P2D23

4..20mA 3

Water table for wells Generic1 4..20mA 3

Water table for wells Flux - 26Y 4..20mA 3

Reservoir or canal water level

Dinel - HLM-16N Water column pressure / 1 to 200m / 4..20mA

3


Dinel - ULM-53N Ultrasound / 0.25 to 10m / 4..20mA

3


Seametrics - PS98i 4..20mA 3


Eno Scientific - Well Watch 700

4..20mA 3

Water pH Global Water - WQ201B 4..20mA 3

Water pH Ponsel - PPHRB pH - Redox - Temperature / SDI12

1

Water conductivity Ponsel - PC4EB CE - Salinity - Temperature - TDS-KCl / SDI12

1

Water Conductivity and pH

EMEC - pH&EC Controller LDPHCDPLUS

4..20mA 1

IRR

IGA

TIO

NCOMPATIBLE SENSORS TABLE

EXP

-2D

I

EXP

-3A

I

EXP

-SD

I12

EXP

-485

EXP

-485

-MB

EXP

-232

EXP

-3X4

20

EXP

-REL

AY

EXP

-REL

AY-

LATC

H

EXP

-LA

TCH

EXP

-4LA

TCH

EXP

-SH

T



RF-X1

Electrical variables Mitsubishi - ME96SS RS485 1

ENER

GY


29

Dry contact output Generic1 For pump or AC valve items

1

Latch dry contact output Generic1 For pump or AC valve items

1

Latch Solenoid Output Solenoid Latch - Generic1

For actuation of Latching Solenoids valves

1 4

Pump Speed / Pressure Control

Generic1 Frequency Variator / RS485

1


KSB - PumpDrive 2 Frequency Variator / RS485

1


Mitsubishi - D700/F800 Frequency Variator / RS485

1

IRR

IGA

TIO

N C

ON

TRO

L

1. Ask for other sensors or generics2. 1 probe 36 sensors3. 1 probe 9 depths4. 1 probe 6 depths5. 1 station 7 sensors and 1 floor temperature


EXP

-2D

I

EXP

-3A

I

EXP

-SD

I12

EXP

-485

EXP

-485

-MB

EXP

-232

EXP

-3X4

20

EXP

-REL

AY

EXP

-REL

AY-

LATC

H

EXP

-LA

TCH

EXP

-4LA

TCH

EXP

-SH

T



RF-X1


30

Fertigation Control NodeThe new C1 fertigation controller node is specially designed for the local control tasks at the pump station, with all the advantages of synchronization with the DropControl platform in the cloud. The patent-pending hydraulic control logic makes the local control robust and communicates with other RF-C1’s radio enabled RF-M1’s or the classic RF-X1 unit.

The direct communication with the new C1 App makes it ideal for the local control next to the pump through bluetooth communication. You can control multiple fertigation pumps and you can expand the number of inputs and outputs.


31

INPUTS AND OUTPUTS

• 10 digital inputs• 10 dry contact outputs• 4 analog inputs• 2 RS232 or RS485 Serial ports

• Collaborative wireless networks with 2 miles line-of-sight between nodes.

• 4G/LTE cellular connection to the cloud for synchronization.

• With energy backup and solar power options.• Wide variety of sensors and actuators available.• Filter flushing capabilites.• Patent pending hydraulic control logic

Processor ARM® 32-bit Cortex®-M4

Local Storage 1MB Flash1GB industrial micro SD SLC

Dimensions 9x9.7x4.2 [in]

Weight 3.82 [lbs]

Enclosure IP65 outdoor rugged UV resistant polycarbonate enclosure

Synchronization

• Local RF synchronization every 5 seconds• Sending data to the cloud every 15

minutes (can be as low as 1 minute)• All alarms and control actions: maximum

20 seconds

PowerInput/Output

options• 10x Digital inputs: counter (up to 40Hz) or

discrete (9 to 24 VAC/DC), configurable from the cloud

• 10x Dry contacts Outputs: 3Amp 277VAC /125VDC SPST

• 4x Independent Analog inputs: 4..20mA, 12bit resolution (or 2x differential inputs)

• 2x RS232 / RS485 serial ports. (MODBUS enabled)

• Transformer 220-110VAC at 24VDC• Optional 10W, 5V Solar panel, 14x1x0.7 [in]

(relays not functional with only solar)• 13,000mAh Lithium (Li-ion) batteries• Consumption of 40mAh at rest without

sensors/ 140 mA Gateway Version

• Up to 120 total digital inputs or outputs

• CAN communication with expansionsExpansions


• Local controller with web programming.• Local mesh networks + desktop & mobile.• IP65 protection for the weather.• Bluetooth for local control and irrigation monitoring.• Firmware updates via cloud software. • Support personnel set configurations and help monitor

the farm status via WOS & DropControl applications.• Compatible with all other WiseConn RF units.• Compliance with FCC and Subtel regulations.

DEVICE FEATURES

• Control and monitoring of pump stations.• Control of fertilizer injection.• pH control.• Monitoring and control of variable-frequency drive.• Remote Industrial Automation.• Local and wireless communicatin for valve control.

APPLICATIONS

SPECIFICATIONS

Designed to be the perfect pump station control unit


32

-Translucent top outer coverA 1

-Internal connection coverB 1

BU-C1-HMIHMI boardD

BU-C1C1 Central unitC 1

1

-Polycarbonate enclosure 9x9.7x4.2 [in]E 1

-Inner coverF 1

3.7 [VDC] - 13 [Ah] Ion lithium battery 1G ACC-ENERGY-BATT-4-13

8” UFL-SMA Pigtail 1H

2 [dBi] Omnidirectional antenna with SMA connection 1I ACC-ANT-900-OM2

PG16 Cable glands 2J

PG21 Cable glands 2K

110/220 VAC to 24VDC Power supply 1L ACC-ENERGY-PS-110-24-3

Power

OFF Line

ON Line

Battery

Ext. Power

Op. Mode

Outputs

Inputs

4.-20 mA

Serial

Factory O/C

Chanel

Status

RF-1

RF-2

4-20 mA

C1 1 2 3 4 5 1 2 3 4 5V1 C1 GND 1+V1 GND1- V AT1 BR1 AT2 BR2 GND

Outputs

C2 6 7 8 9 10 6 7 8 9 10V2 C2 GND 2+V2 GND2- S CH CL GND SLR GND VIN GND

Outputs Inputs

Inputs

4-20 mA Serial

Exp Power

A

B

E C D FG

HI

J

L

K

Front view example of RF-C1-

900HP assembly with main parts.

ACC-ANT-EXT-CELL-UFL-8in

ACC-ENC-PG16-CGLAND

ACC-ENC-PG21-CGLAND



33


Modem XBee3 Cellular LTE M (with microSIM)• Standard: LTE M • Cellular Antenna for 700-2700Mhz 4G LTE 2dBi (Monopole) • Modem Certifications: FCC, GCF, PTCRB, AT&T, CE

Digi XBee Pro Module - 900MHz - FHSS modulation - 250mW (+ 24dBm)• Male connector for RP-SMA antenna• 2dBi antenna included (2 miles LoS range)• 10 bit DIP switch channel selection• Xbee Certifications: FCC, IC, RoHs, ANATEL, IFETEL, IDA

VERSIONSRF-C1

-900HPRF-C1

-900HP-LTE-A

RF-C1-900HP-LTE-V

RF-C1-LTE-A

RF-C1-LTE-V

GATEWAY GATEWAY


3434

These expansion modules allow the RF-C1 to operate more inputs and outputs and for different devices, such as filters and frequency inverters. Up to 5 modules can be connected via CAN communication.

Expansion Modules for RF-C1

mod-c1


3535

-Hardware kit for assembly (screws)A

B

-

24 -250VAC and 24 VAC varistors

Expansion Modules Include:ID DESCRIPTION Q CODE

• Inputs: - 10x counter inputs (up to 40Hz) or discrete - 9V to 24V AC / DC - Configurable from the cloud• Outputs: - 10x dry relay contacts - 3Amp 277VAC / 125VDC SPS

MOD-C1-10R-10DIExpansion Module for RF-C1 that provides 10 relay outputs and 10 optocoupled digital inputs

Features

• It has 12 outputs for latch solenoid control• Allowed solenoids: 2 or 3 wires, 2 or 3 ways• Output Capacitance: 4700uF - 15V• Maximum cable distance (to solenoid): 328 [m] *

MOD-C1-12LATCHExpansion Module for RF-C1 that provides 12 Latch outputs

Features


36

COMPATIBLE SENSOR TABLE

RF-

C1

MO

D-C

1-10

R-1

0DI

MO

D-C

1-12

LATC

H

Variable Model - Sensor Brand Type / Dimensions / Comms RF-C1

Pressure Detector Generic 1 Pressure switch / 10, 5 o 3 PSI / Dry Contact 10 10

Pressure Detector WiseConn Pressure switch / 10, 5 o 3 PSI / Dry Contact 10 10

Level Detector Dry contact level switch - Generic 1 Level switch / Dry contact 10 10

Irrigation Volume Volume pulse emitter - Generic 1 Dry Contact 10 10

Irrigation Volume Bermad - TurboIR Dry Contact 10 10

Irrigation Volume Bermad - Turbo Bar E Dry Contact 10 10

Irrigation Volume Arad - SF15 Dry Contact 10 10

Irrigation Volume Wellford Dry Contact 10 10

Irrigation Volume Seametrics - AG300 Dry Contact 10 10



Irrigation Volume McCrometer - McPropeller Dry Contact 10 10

Irrigation Volume McCrometer - Mc Mag3000 Dry Contact 10 10

Water pressure Generic 1 4..20mA 4

Water pressure Konics - TPS20 4..20mA 4



Water pressure Transducers Direct - TD1000 4..20mA 4

Water pressure Transducers Direct - TDH33 4..20mA 4

Water pressure Schneider Electric - XMLK100P2D23 4..20mA 4

Water table for wells Generic 1 4..20mA 4

Water table for wells Flux - 26Y 4..20mA 4

Reservoir or canal water level Dinel - HLM-16N Water column pressure / 1 a 200m / 4..20mA 4

Reservoir or canal water level Dinel - ULM-53N Ultrasound / 0.25 a 10m / 4..20mA 4

Reservoir or canal water level Seametrics - PS98i 4..20mA 4

Reservoir or canal water level Eno Scientific - Well Watch 700 4..20mA 4

Water pH Global Water - WQ201B 4..20mA 4

Water Conductivity and pH EMEC - pH&EC Controller LDPHCDPLUS 4..20mA 2

Dry contact output Generic 1 For pump or AC valve items 10 2 10

Latch Solenoid Output Solenoid Latch - Generic 1 For actuation of Latching Solenoids valves 12IRR

IGAT

ION

37

Pump Speed / Pressure Control Generic 1 Frequency Variator / RS48 2

Pump Speed / Pressure Control KSB - PumpDrive 2 Frequency Variator / RS485 2

Pump Speed / Pressure Control Mitsubishi - D700/F800 Frequency Variator / RS485 2

Latch solenoid outputs for filter control Generic 1 For batch of Latch solenoid valves in filters 12

Fertilizer Injection Control Generic 1 Frequency Variator / RS485 4

IRR

IGA

TIO

N C

ON

TRO

L

1. Ask for other sensors or generics2. RF-C1 requires to be energized for relay operation

COMPATIBLE SENSOR TABLE

RF-

C1

MO

D-C

1-10

R-1

0DI

MO

D-C

1-12

LATC

H

Variable Model - Sensor Brand Type / Dimensions / Comms RF-C1

ACCESSORIES | CATALOG

38


39

ACCESSORIESBatteries, Solar Panels, Power Supply,

Antennas, Cables


40

ACC-ENERGYBattery, Solar Panel and Power Supply Accessories

ACC-ENERGY-SOLAR-1010 [W] Solar Panel for RF-X1/RF-C1/RF-M1 nodes. Includes mounting bracket and 24 ft. cable

ACC-ENERGY-PS-110-5-25VDC 2A power source for RF-X1/M1 Nodes

4.5x3.5x2.7 [in]

ACC-ENERGY-PS-110-24-324VDC 3A power source for RF-C1 Nodes

• Input: 220/110 [VAC]• Output: 24 [VDC]• Max Current: [3A]

ACC-ENERGY-BATT-4-133.7 [V] and 13 [Ah] Lithium Ion Battery for RF-X1/RF-C1/RF-M1 Nodes

14x1x0.7 [in]

Watt/Volt.

• 10[W] • 5 [V]

RF-X1/RF-X1-GWRF-M1RF-C1/RF-C1-GW

Specifications

• 3.7 [V]• 13 [Ah]

4.3x2.6x0.6 [in]


Dimensions

For

Dimensions

For

Specifications

RF-C1/RF-C1-GW

Dimensions

For

2.6x1.8x2.4 [in]• Input: 220/110 [VAC]• Output: 5 [VDC]• Max Current: [2A]

Specifications


Dimensions

For


41

ACC-ENERGYBattery, Solar Panel and Power Supply Accessories

ACC-PM-X1Power adapter that reduces the probability of the battery being locked when it is completely discharged. Allows the connection of 2 solar panels.

ACC-ANT Antenna Accessories

For

RF-X1/RF-X1-GW

N to RPSMA

ACC-ANT-900-OM6-COAX-20FT6dBi N connector omnidirectional outdoor antenna w/brackets and 20 ft. SMA to N cable (Radio High Gain)

Connector

dBi

6

For

24x1.5 [in], cable length: 20 ft.

Dimensions and Cable Length


RP-SMA

ACC-ANT-900-OM22dBi SMA connector omnidirectional antenna included in RF-X1/C1/M1

Connector

dBi

2

For

3x0.4 [in], cable not included




42

ACC-ANT Antenna Accessories

ACC-ANT-FILTER915 MHz ISM bandpass filter for XBee 900HP radios.

UFL-RPSMA Female

Connector For


SMA

ACC-ANT-CELL-OM33dBi external cellular omnidirectional antenna for modems

Connector

dBi

3

For

3.5x1 [in], cable length: 3 ft.


RF-X1-GWRF-C1-GWRF-M1-LTE

N to RPSMA

ACC-ANT-CELL-OM77dBi N connector cellular omnidirectional outdoor antenna w/brackets and 20 ft. SMA to N cable for modems (Cellular High Gain)

Connector

dBi

7

For

37.5x3 [in], cable length: 20 ft.


RF-X1-GWRF-C1-GWRF-M1-LTE

SMA Male

ACC-ANT-CELL-OM44dBi SMA connector omnidirectional antenna included in RF-C1-GW/ RF-M1-LTE/3G

Connector

dBi

4

For

RF-C1-GWRF-M1-LTE / 3G


43

ACC-COAX Antenna Extenders, Coaxial Cables, and Lightning Rod Accessories

Extension Cable Antenna 25 ft. SMA-N, with stand,for ACC-ANT-900-OM6.

ACC-ANT-EXT-RF-SMA-N-_MT

SMA/N

Connector A / Connector B

25/39 ft.

Different Lengths

ACC-ANT-900-OM6

For

SMA to SMA extension cable for antennaACC-ANT-EXT-RF-_FT

SMA/ SMA

Connector A / Connector B

4, 10, 25 and 39 ft.

Different Lengths

ACC-ANT-900-OM2

For

Lightning arrester with 4 ft. extension cable

N

Connector

Copper Rod 4 ft. and 1”

Ground Requirement

ACC-COAX-FUSE-OM2ACC-COAX-FUSE-OM6

For

ACC-COAX-LFUSE-OM2

600 [V]

Protection

45

IRRIGATE

PRECISELY


+1 (559) 326 [email protected]

4589 N. Marty Ave Suite 102Fresno, CA 93722

be wise, be connected

Documents