beachflag with cantilever · beachflag with cantilever 1 2 3 4 5 6 7 insert the flagpole into the...

2
Beachflag with cantilever 1 2 3 4 5 6 7 Insert the flagpole into the corresponding opening in the base until it is fixed in place. Fix the print to the flagpole hook using the carabiner. To do this, press the carabiner to- gether and slide it through the eyelet. Pull the beachflag print fully onto the flagpo- le, ensuring that is tightly stretched. On the cantilever of the flagpole, start to pull the beachflag print onto the pole over the hemstich. Now attach the remaining parts of the flag- pole. Make sure that the individual parts are properly pressed together. First connect the cantilever to the narrow segment of the flagpole. Remove the beachflag print, the cantilever and the three flagpole parts from the trans- port bag. 8 Here is your cantilever shape beachflag in full size. Assembly instructions

Upload: others

Post on 14-Oct-2020

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Beachflag with cantilever · Beachflag with cantilever 1 2 3 4 5 6 7 Insert the flagpole into the corresponding opening in the base until it is fixed in place. Fix the print to the

Beachflag with cantilever

1 2 3

4 5 6

7

Insert the flagpole into the corresponding opening in the base until it is fixed in place.

Fix the print to the flagpole hook using the carabiner. To do this, press the carabiner to-gether and slide it through the eyelet.

Pull the beachflag print fully onto the flagpo-le, ensuring that is tightly stretched.

On the cantilever of the flagpole, start to pull the beachflag print onto the pole over the hemstich.

Now attach the remaining parts of the flag-pole. Make sure that the individual parts are properly pressed together.

First connect the cantilever to the narrow segment of the flagpole.

Remove the beachflag print, the cantilever and the three flagpole parts from the trans-port bag.

8

Here is your cantilever shape beachflag in full size.

AufbauanleitungAssembly instructions

Page 2: Beachflag with cantilever · Beachflag with cantilever 1 2 3 4 5 6 7 Insert the flagpole into the corresponding opening in the base until it is fixed in place. Fix the print to the

Stands

2 3

FLOOR PLUG BASE

Place the fl oor plug in the desired place on the ground. Fold down the red handles and twist the fl oor plug into the ground in a clockwise direction using these handles until the thread is fully fi xed into the ground.

CROSS PLATE BASE

Fill the hose weight with sand or water. Open the cross plate, separate the legs and place the cross on the base. Place the fi lled hose weight onto the opened cross plate.

1

14 KG BASE

First, on the front of the base plate, remo-ve the plastic plugs from the holes for the screws. Next, place the attachment on the base plate and fi x it in place using a Phillips screwdriver and the four screws provided.

Aufb auanleitungAssembly instructions