before preparation during after usi has a solution …€¦ · 8/8/2019  · concrete issues for...

2
Leading Edge “Keeping You In The Know” AUGUST 2019 - Since 2002 © Copyright - Unconventional Solutions, Inc. 2019 GROUPS Experts in Composite Repair & Protective Coatings Contact USI TODAY 248-735-7000 Your Midwest/Great Lakes Stocking Distributor & Training Experts And Set up a Site Visit to receive a FREE Audit. Let the USI Team find the BEST Solution for your Unique Issues. Leading Edge USI HAS A SOLUTION FOR YOUR UNIQUE CONCRETE ISSUES For the Unique Solution in the above photos, the knowledgeable USI Team Members chose a product from Epigen 301 Epoxing Backing Grout was chosen. Epigen 301 is a tough infusible solvent free advanced composite system developed to be used as a multipurpose high strength casting and grouting polymer. It exhibits excellent chemical resistance, corrosion resis- tance, and high structural integrity under stress in both compression and tension. This product is designed to be used effectively in hot or cold climates, and is able to be blended with graded aggregate without appreciable loss of strength. Addition of graded aggregate is recommended when installation depth is extreme or to control excessive exotherm under hot conditions. Suitable for use on a variety of surfaces including steel, wood, and concrete. BEFORE BEFORE AFTER AFTER PREPARATION PREPARATION DURING DURING TYPICAL APPLICATIONS Civils Foundation Bedding Road Bridges Grouting Crusher Backing & Grouting Concrete Repair Casting Mould Making Precision Grouting Crack Repair Slipway Foundations Bedding Rails Floor Re Leveling High Strength Adhesive Chemical Anchoring Engineering Grout Wet to Dry Concrete CHEMICAL RESISTANCE The following results represent relevance when in grouting applications of chemical facilities. Tested at 21°C - Samples cured for 10 days at 25°C 1 = Continuous or long term immersion 2 = Short term immersion 3 = Splash and spills 4 = Avoid contact Acetic Acid, 10% 2 Ammonium Chloride 1 Hydrochloric Acid, 5% 1 Beer 1 Hydrochloric Acid, 10% 1 Dichloromethane 4 Hydrochloric Acid, conc 2 Diesel Fuel 1 Nitric Acid, 10% 2 Kerosene 1 Phosphoric Acid, 5% 1 Petrol 1 Phosphoric Acid, 20% 2 Salt Water 1 Sulfuric Acid, 5% 2 Sewage 1 Sulfuric Acid, 20% 3 Skydrol 1 Ammonium Hydroxide, 5% 1 Sodium Cyanide 1 Ammonium Hydroxide, 20% 1 Sodium Hypochlorite 1 Potassium Hydroxide, 5% 1 Toluene 2 Potassium Hydroxide, 20% 1 Trichloroethane 2 Sodium Hydroxide, 5% 1 Wine 1 Sodium Hydroxide, 20% 1 Xylene 1 This information is supplied as an indicative reference only. Caution should be used where direct comparisons are to be made.

Upload: others

Post on 10-Oct-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: BEFORE PREPARATION DURING AFTER USI HAS A SOLUTION …€¦ · 8/8/2019  · CONCRETE ISSUES For the Unique Solution in the above photos, the knowledgeable USI Team Members chose

Leading Edge“Keeping You In The Know” AUGUST 2019- Since 2002

© Copyright - Unconventional Solutions, Inc. 2019

GROUPSExperts in Composite Repair & Protective Coatings

Contact USI TODAY 248-735-7000 Your Midwest/Great Lakes Stocking Distributor & Training Experts And Set up a Site Visit to receive a FREE Audit. Let the USI Team find the BEST Solution for your Unique Issues.

Leading Edge

USI HAS A SOLUTION FOR YOUR UNIQUECONCRETE ISSUES For the Unique Solution in the above photos, the knowledgeable

USI Team Members chose a product from

Epigen 301 Epoxing Backing Grout was chosen. Epigen 301 is a tough infusible solvent free advanced composite system developed to be used as a multipurpose high strength casting and grouting polymer. It exhibits excellent chemical resistance, corrosion resis-tance, and high structural integrity under stress in both compression and tension. This product is designed to be used effectively in hot or cold climates, and is able to be blended with graded aggregate without appreciable loss of strength. Addition of graded aggregate is recommended when installation depth is extreme or to control excessive exotherm under hot conditions. Suitable for use on a variety of surfaces including steel, wood, and concrete.

BEFOREBEFORE AFTERAFTERPREPARATIONPREPARATION DURINGDURING

TYPICAL APPLICATIONS

Civils Foundation Bedding

Road Bridges Grouting

Crusher Backing & Grouting

Concrete Repair

Casting Mould Making

Precision Grouting

Crack Repair

Slipway Foundations

Bedding Rails

Floor Re Leveling

High Strength Adhesive

Chemical Anchoring

Engineering Grout

Wet to Dry Concrete

CHEMICAL RESISTANCEThe following results represent relevance when in grouting applications of chemical facilities.

Tested at 21°C - Samples cured for 10 days at 25°C1 = Continuous or long term immersion • 2 = Short term immersion

3 = Splash and spills • 4 = Avoid contact Acetic Acid, 10% 2 Ammonium Chloride 1 Hydrochloric Acid, 5% 1 Beer 1 Hydrochloric Acid, 10% 1 Dichloromethane 4 Hydrochloric Acid, conc 2 Diesel Fuel 1 Nitric Acid, 10% 2 Kerosene 1 Phosphoric Acid, 5% 1 Petrol 1 Phosphoric Acid, 20% 2 Salt Water 1 Sulfuric Acid, 5% 2 Sewage 1 Sulfuric Acid, 20% 3 Skydrol 1 Ammonium Hydroxide, 5% 1 Sodium Cyanide 1 Ammonium Hydroxide, 20% 1 Sodium Hypochlorite 1 Potassium Hydroxide, 5% 1 Toluene 2 Potassium Hydroxide, 20% 1 Trichloroethane 2 Sodium Hydroxide, 5% 1 Wine 1 Sodium Hydroxide, 20% 1 Xylene 1

This information is supplied as an indicative reference only.Caution should be used where direct comparisons are to be made.

Page 2: BEFORE PREPARATION DURING AFTER USI HAS A SOLUTION …€¦ · 8/8/2019  · CONCRETE ISSUES For the Unique Solution in the above photos, the knowledgeable USI Team Members chose

August 2019 UPCOMING EVENTS

CONTACT THE USI TEAM TODAY! We have an Unconventional Solution for YOU!Tiffany

President & Technical Support - MI [email protected] • 248-515-4938

DougTechnical Director USA - MI HQ

[email protected] • 248-830-2935

BrittanyTechnical Sales Consultant/Support/Training - SW Ohio Branch

[email protected] • 513-383-6302Jason

Shipping/Receiving/Customer Service - SW Ohio [email protected] • 937-704-4220

ChristineStaff Accountant - MI HQ

[email protected] • 248-735-7000 Ext 204Christina

Graphics/Media - MI [email protected] • 248-735-7000 Ext 205

Joe LInventory Specialist - MI HQ

[email protected] • 248-735-7000 Ext 206

NicoleBranch Coordinator - NW Indiana/Chicagoland Branch

[email protected] • 219-733-0541 • Mobile 312-890-6465

GROUPSExperts in Composite Repair & Protective Coatings

MI HQ 248-735-7000 | OH 937-704-4220 | IN 219-733-0541www.USIgroups.com

JulieReceptionist - MI HQ

[email protected] • 248-735-7000 Ext 202

TraciInside Sales Consultant - SW Ohio [email protected] • 937-202-0002

• Thursday September 5 - MGI Golf Outing in Jackson, MI• Thursday September 12 - ICS Meeting, Mt. Vernon, IN• Thursday September 12 - Tri-State Corrosion Meeting in Wheeling, WV• Thursday September 19 - SEMPPES Meeting, Detroit, MI• Friday September 27 - AIS Golf Outing in Ottawa Lake, MI

FAST, FRIENDLY DELIVERY - RESULTS, NOT EXCUSES!

The USI Team offers:Technical Support • Training • Troubleshooting

HOT SHOT Same Day Local Deliveries for Emergencies and Next Day Deliveries for orders placed by 2:30PM EASTERN TIME

ChrisTechnical Sales Consultant - MI HQ

[email protected] • 314-856-5351

September 2019 UPCOMING EVENTS

• Tuesday thru Thursday August 13 thru 15 - Midwest Energy Association (MEA) in Rochester, MN• Friday August 30 - Labor Day Expo at Baker’s in Milford, MI• Saturday August 31 - Labor Day 30K Festival of Races, Run/Bike 30K, Run/Walk 10K & 6K (supports non-profits) in Milford, MI

Joe GInside Sales Consultant - NW Indiana/Chicagoland Branch

[email protected] • 219-733-0543

MI HQ - 28056 Oakland Oaks CT., Wixom, MI 48393

Meet USI’s NewestTeam Member!

Joe LWe are very proud

to add Joe to our Team.Welcome Joe & thank you for your service.

DO YOU HAVE ACONTAINMENT AREATHAT NEEDS REPAIR? The USI Team can help!

The USI Team prepped the area first and repaired many cracks. USI also added much needed burms to make over flow liquids drain in the correct direction. Products used were an Epoxy Concrete Repair, an Epoxy Sealer, an Epoxy Coating and an Epoxy Slip Deterrent.

Contact the USI Team todayfor your Unique Solution!