before you rewire your home
Post on 19-Oct-2014
448 views
DESCRIPTION
A quick overview of what to do and how best to do it when you have to rewire your home. Does your home have aluminum wiring? Was your home built before 1970? Call an electrician if you answered yes to either question.TRANSCRIPT
Home RewiringBy B.K. Electric Services
Do You Need It?
Was your home built between 1960 and 1970?
Then you might have aluminum wiring
What’s wrong with aluminum?
Aluminum overheats easilyIt has a higher rate of expansion than
copper wiring which means:◦Loose connections◦Arcing◦Melting◦FIRE
Rewiring Your Home
If you need to rewire, here are the steps you should take:◦Tour of your home◦Detailed list◦Hire an electrician
If You Missed It
1: Tour Your Home2: Create A Detailed List
3: Hire An Electrician
The Tour
Write down the list of appliances you plan to use and where.
If you know where any GFCI outlets will be, make a note of them
The tour is about creating a work scope
The List
From your notes, you should make a detailed list
List what kind of permits you’ll needList what kind of wires you’ll need (fire,
security, data, etc.)Set your budget
The Electrician
Choose a contractor that will do the most work for your budget
The electrical contractor should obtain all the permits and be familiar with standards
Let him or her walk with you through your home
Loose Ends
Old breaker panels should be checked for their coating
A cracked coating can mean big trouble for you sooner than later
Check for◦Burn residue◦Cracked insulation◦Loose connections
Watch Out For That Tree!
Old homes may have existing infrastructure that may interfere with wiring
Do NOT cut through pre-existing pipes or you may permanently damage your home.
TIPS
Expect surprisesKnow what you want doneBe flexibleThe stubborn branch breaks while the
bendy branch adapts.
Contact Us
For more tips, visit us at◦http://www.slideshare.net/BKElectrianServices◦http://www.bkelectricianservices.com
Or contact us at◦[email protected]◦(310) 430 2300