bench top planer

1641 Bartlett RoadMemphis, TN 38134

Phone: 877-568-8879Fax: 901-380-9396Email: [email protected]

Website - https://www.cutechtool.com

Websitehttps://www.cutechtool.com

WELCOME TO CUTECH TOOL

CONNECT : Facebook Twitter

https://www.cutechtool.com/



https://www.facebook.com/pages/Cutech-Tool-LLC/877113832385571

https://twitter.com/CutechTool

Cutech Tool, LLC was established to warehouse and distribute planers and jointers in the US market. Our products are tested and proven to be some of the best bench top tools in the market place. We continue to improve our products by refining our precision in house manufacturing processes and quality inspection to ensure your are getting the best planers and jointers available in the market today

ABOUT US








Planer








Please read before operating your new planer

Make certain you also read and follow the instructions under the “Unpacking” section of your manual for instructions in cleaning and preparing your planer before use.

1641 Bartlett RoadMemphis, TN 38134CONNECT: Facebook Twitter








Instructions for oil removal from CUTECH portable planer cutterheadsplaner

Step 1 - Unplug the planer.Step 2 - Place the planer at a comfortable working height and supply ample lighting.Remove the dust hood and any other covers necessary to expose the cutter head.Step 3 - Make sure you lay down rags on the bed of the planer to catch any residue from the cleaning process.Step 4 – Cleaning of the cutter head can be done using one of the following options:








Option A - Use an old nylon toothbrush and rags with solvent, such as mineral spirits or non-chlorinated brake cleaner, to clean off the oil. The knives are sharp, be careful not to cut yourself.

Option B - Using the supplied T-25 T-handle Tore tool, carefully remove the cutter tips or knives. Again, be EXTREMELY CAREFUL when handling the knives or cutter tips as they are VERY SHARP!!! Separate the knives/tips from the screws and place in separate containers with a bit of solvent.








After wiping off the head, wipe down any other crevices, rollers, or any other places where oil is visible. The object is to remove the grease before the planer is put into use. Use a sacrificial board after cleaning to test for remaining grease. If oil is still apparent, repeat whichever method you used above.

Conclusion








Spiral Cutter head Comparison












New Cutech Cutterhead




Thank You





Website : https://www.cutechtool.com





bench top planer

Devices & Hardware