benchmark customer day - 22nd september - benchmark presentation phase 1
DESCRIPTION
TRANSCRIPT
A Turning Point in Building Design
PHASE 1
www.kingspanbenchmark.com
Benchmark Presentation Phase 1.pdf 1 25/10/2010 16:13
Take the benefits of what we do best…
Responsible Construction Build Quality
• Reduce Injury on site
• Social Responsibility
p
• Build Speed
• Air leakage
y
• Reduce errors on site
• Environmental efficiency
• Lifecycle
• Sustainability
H t Ai M i tHeat Air Moisture
Benchmark build optionsBenchmark build options
• Unique insulated Karrier Panel has been specifically designed & tested to support Benchmark’s range of Facades
• Can be laid vertically or horizontally with or without a tophat section to suit the façade and fixed back to purlins or steel framing system
• System provides excellent weather resistance, thermal, acoustic, fire and structural performance
• Metal faced insulated Karrier panel makes the building watertight, taking the façade off the critical path and enabling internal fit out to start sooner
• Benchmark façade is fixed to the Karrier Panel using a specified and• Benchmark façade is fixed to the Karrier Panel using a specified and tested railing system
System features and benefitsSystem features and benefits
• Design flexibility – each system can be easily integrated with each other.
• Fully tested complete external wall solution including LPS1181 approved FIREsafe systems
• Single point responsibility – one contractor installing wall and f dfaçade.
• Fast installation platform for application of façade, allowing other services to gain access sooner.
• Removes façade from critical path• Removes façade from critical path.• Clear simple pricing structure providing a cost effective
solution.• Simple detailing to maximise air leakage performance• Simple detailing to maximise air leakage performance.
So Benchmark is…..
• A reference point for a complete insulated building envelope
• Façade solutions to compliment building designs
• Exciting colours textures and finishes
• Roof systems that raise the standard in performance
• Backed by the Kingspan Benchmark Total Performance Guarantee
• Technical support service
Roof, Wall and Façade Systems
Additional Build options
• Karrier Panel & Facade System
• Premium Insulated Panel System
• Rainscreen with traditional build up
WHAT DOES BENCHMARK OFFER?
WHAT DOES BENCHMARK OFFER?
Eleven Façade Systems
WHAT DOES BENCHMARK OFFER?
Eleven Façade Systems
Four Panel Systems
WHAT DOES BENCHMARK OFFER?
Eleven Façade Systems
Four Panel Systems
Four Roof Systems
CategoriesThere are 7 main categories regarding the façade systems;
MetallicsGlassPhotovoltaic'sCeramicCementitious BoardsWoodBrick
PROPOSED BENCHMARK FAÇADE SYSTEMS
PHASE ONE FAÇADE SYSTEMS
There are five different types of metallic façade systems being offered; 1.Steel - Stainless & Weathered2. Aluminium Composite Material3. Aluminium, 4. Copper5. Zinc.
Available in an endless range of colours. Matching ancillaries to provide a high quality finish. Both through fix and secret fix options available. Different Cassette Options (next slide)
PROPOSED BENCHMARK FAÇADE SYSTEMS
Metallic's
PROPOSED BENCHMARK FAÇADE SYSTEMS
Metallic's – Cassette Options
1. Hook-on 2. Interlocking Plank 3. Shingle 4. Recessed Fix 5. Tray
PPC Ali PPC Ali PPC Ali PPC Ali PPC Ali ACM - - ACM ACM - Zinc Zinc - -Copper Copper Copper Copper -Weathered St Weathered St - Weathered St -Stainless St Stainless St Stainless St Stainless St -
InTroDUCTIon Steel, Aluminium Composite Material (ACM), Aluminium, Copper and Zinc metallics provide striking finishes that give buildings a modern stylised appearance. Metallic façades are truly bespoke.
They can be tailored to your project and offer an endless range of colours. Combined with superior aesthetics the Benchmark Karrier panels provide excellent weather protection to the building envelope. They are simple to integrate into other systems with matching flashings and ancillaries available to provide a complete finish.
BEnEFITS • Superior aesthetics• Provides excellent weather protection to the building envelope• A wide range of material and cassette options, including
through fix and secret fix options• Virtually maintenance free• Individual cassettes can be removed and replaced as necessary• Comprehensive design and technical support• Flashings and ancillaries are available in the same material for a
complete solution• Long strip metal options are available in Copper, Steel and Zinc• Independently tested system, including CWCT external building
envelope for the Tray cassette option• Available with the Total Benchmark Guarantee• Manufactured and supplied under a quality system certified to
bS En iSO 9001: 2000• Manufacturing plants are ISO 14001 (Environmentally)
accredited
STEEl, aCM, al, Cu & ZnMETallICS
bEnCHMARK TEChnICal
www.kingspanbenchmark.com/products/wall/metallic+44 (0) 800 970 9036 (UK) +353 (0) 42 969 8529 (Ireland)
pre-coated & weathered option, including Corten. A selection of ACM colour options can be seen on page 49, Zinc on page 50 and Copper on page 51. The complete range can be seen on the benchmark website.
Build option
Please refer to Build Option 1, shown on page 6.
TEChnICal ovErvIEW Colours
Aluminium is available in an anodized finish, pre-painted aluminium sheets, post painted aluminium sheets & post powder coated. Colourful façades that can be produced in virtually any colour BS, NCS and RAL or matched to other colours on request subject to minimum production quantities.
Steel is available in a stainless steel option (shown on page 48),
Cassette options
2. interlocking plank1. Hook-On-Cassette 5. Tray3. Shingle 4. Recessed Fix Cassette
STEEl, aCM, al, Cu & Zn
Metal Type Cassette option
hook-on- Cassette
Interlocking plank
Shinglerecessed Fix
CassetteTray
Aluminium
0.9mm ppC only 3
1.5mm 3
2.0mm 3 3 3 3
3.0mm 3 3 3
ACM
4.0mm 3 3 3
6.0mm 3 3
Zinc
0.8mm 3
1.0mm 3
Copper
0.5mm Oxid only 3
0.6mm Classic, patina only 3
0.7mm 3
1.0mm 3
1.5mm Classic only 3
2.0mm Classic only 3 3 3
Steel
Weathered Steel (Coreten A)
1.5mm 3 3 3
3.0mm 3 3
Stainless Steel
0.8mm 3 3
1.0mm 3 3
2.0mm 3 3 3
3.0mm 3 3
METALLiCS STEEl, aCM, al, Cu & Zn | 98
MEShMETallICS
bEnCHMARK TEChnICal
www.kingspanbenchmark.com/products/wall/metallic+44 (0) 800 970 9036 (UK) +353 (0) 42 969 8529 (Ireland)
MESh
TEChnICal ovErvIEW Material Description
The metal is sheared and then stretched in a single process creating the apertures and therefore expanding the metal.
Colours
The mesh can be powder coated in virtually any colour BS, NCS and RAL or matched to other colours on request subject to minimum production quantities.
Dimensions
Maximum module size 2500mm by 1250mm. Smaller bespoke sizes are available*.
Thickness: See table below.
*Dependent on the mesh specified.
The different mesh options are displayed on the website.
Build option
Please refer to Build Option 1, shown on page 6.
Façade Weight
Mesh size and thickness are dependent on project design requirements. For accurate weights for your specific application, contact the benchmark Technical Services Department.
BEnEFITS•Thousands of colour possibilities• Virtually maintenance free• Individual modules can be removed and replaced as necessary• Comprehensive design and technical support• Flashings and ancillaries are available in similar complementary
colours for a complete solution• Independently tested system, including CWCT external
building envelope
• Available with the Total Benchmark Guarantee• Manufactured and supplied under a quality system certified to
bS En iSO 9001: 2000• Manufacturing plants are ISO 14001 (Environmentally)
accredited
InTroDUCTIonArchitectural expanded mesh is an ideal material for external cladding, enhancing the look of a building. Soft curves and unusual apertures combine to present mesh that can blend seamlessly into its surroundings or make a bold architectural statement.
The mesh is available in Aluminium, Stainless Steel, Brass, Corten and Copper, in 6 different mesh patterns and can be coated in virtually any colour BS, NCS and RAL or matched to other colours on request subject to minimum production quantities.
Mesh Type lW SWWidth
(Strand)Thickness (Strand)
Mesh 1 115 48 20 1.6-5
Mesh 2 44 12 5 1.5
Mesh 3 114.3 15 2.9 3
Mesh 4 115 9.5 3 1.5
Mesh 5 110 52 20 2
Mesh 6 30.48 16.93 4.6 1.5
METALLiCS MESh | 1110
Available only with the Shackerley rail system 3 straps ‘Standard’ tile size 1198 x 598mm Coloured available 1000 x 1000mm Fabricated at Romag Vertical strap bonded to back of tile with Dow Corning 993 adhesive Certified applicator (audited) Standard application for Romag Rigorous quality check procedure (batch sample testing) Every job checked by Romag to ensure suitable for environment (or worse case?),
and to warranty (5 years! Glass market doesn’t have large warranties)
PROPOSED BENCHMARK FAÇADE SYSTEMS
Coloured/Reflective Glass
ColoUrED & MIrrorEDGlaSS
bEnCHMARK TEChnICal
www.kingspanbenchmark.com/products/wall/glass+44 (0) 800 970 9036 (UK) +353 (0) 42 969 8529 (Ireland)
For more information on this product
BEnEFITS• Thousands of colour possibilities• Provides excellent weather protection to the building envelope• Safely protects against accidental glass impact, breakage or
fall out• Secret fix option only, no visable fixings• Virtually maintenance free• Individual modules can be removed and replaced as necessary• Comprehensive design and technical support• Flashings and ancillaries are available in similar complementary
colours for a complete solution
• Independently tested system, including CWCT external
building envelope • Available with the Total Benchmark Guarantee• Manufactured and supplied under a quality system certified
to bS En iSO 9001: 2000• Manufacturing plants are ISO 14001 (Environmentally)
accredited
InTroDUCTIonBenchmark coloured and mirrored façades give architects and designers more freedom with glass than ever before, with thousands of colour options available.
The screen prints are made with heat and light stable pigments, creating a fade resistant façade. Advanced glazing performance creates a glass façade that is strong, stable and flexible on design.
ColoUrED & rEFlECTIvE
TEChnICal ovErvIEW Material Description
Coloured glass consists of internal toughened glass, UV resistant interlayer including coloured screen print and outer toughened glass.
Mirrored glass consists of internal toughened glass, UV resistant interlayer including black screen print and outer silvered glass.
product Tolerance
Laminate slippage tolerance is in accordance with bS En iSO 12543-5: 1998 (Glass in building. Laminated glass and laminated safety glass. Dimensions and edge finishing). Glass cutting tolerance is +/- 1mm.
aluminium Secondary rail System
The extruded aluminium secondary rail system conforms to BS EN 12020-1: 2008 (Aluminium and aluminium alloys). Extruded precision profiles in alloys EN AW-6060 and En AW-6063. Technical conditions for inspection and delivery) - powder-coated black.
attachment
Extruded aluminium straps, conforming to BS EN 1220-1: 2008 in 6063/T6 grade alloy, are structurally bonded to the glass façade. Straps are secured to the aluminium secondary rail system using self-drilling/self-tapping stainless steel fasteners.
Colours
The coloured glass is available in virtually any colour BS, RAL or matched to other colours on request subject to minimum production quantities. The mirrored glass is available as an option.
Build option
Please refer to Build Option 1, shown on page 6.
Dimensions
Standard module 1206mm length by 606mm height (inclusive of 8mm joint) and maximum actual panel size 1198mm length x 598mm height. Other bespoke sizes are available.
Face panel thickness: 12mm maximum.
Façade & rail Weight
Module size is dependent on project design requirements. For accurate weights for your specific application, contact the benchmark Technical Services Department.
gLASS ColoUrED anD rEFlECTIvE | 1312
PROPOSED BENCHMARK FAÇADE SYSTEMS
Wall Powerpanel Shackerley rail system Manufactured by Romag Same process as Colour/Reflective Glass Tile size limited by multiples of 156mm x 156mm
PV cell size + 21mm (min border width) Integratable with ‘Therma’-range 5.5mm thick PV energy assessment by PT’s team Crystalline PV 15% Cell Efficiency 9m2/kWpeak Annual Output: Approx 65kWhr/m2
bEnCHMARK www.kingspanbenchmark.com/products/wall/photovoltaic+44 (0) 800 970 9036 (UK) +353 (0) 42 969 8529 (Ireland)
For more information on this product
Wall poWErpanEl MoDUlE
InTroDUCTIon Wall Powerpanel Module uses solar photovoltaics to generate clean energy for buildings. Once installed every kW produced by PV has zero carbon emissions, helping to reduce environmental impact as well as energy costs.
The module is suitable for most wall applications on new build or refurbishment projects and has 21 enhanced efficiency polycrystalline silicon cells in series, with 75 to 80 watts of nominal maximum power.
BEnEFITS• Integrated bypass diodes to minimise shading effects• Structurally-bonded aluminium fixing straps for easy installation
onto façade structures• Available in 75 Wp or 80 Wp• Light aluminium frame for ease of installation• Single-source integrated wall, façade and solar PV provider• Installed by MCS approved contractors• Optimised, value-engineered systems for rapid installation• Project analysis / viability, design, supply, installation, testing,
commissioning and handover service• Virtually maintenance free• Generates clean, inflation proof electricity – reduces
energy costs• Can increase the saleable / rentable value of the building
• Once installed every kW produced has zero carbon emissions,
which significantly reduces the carbon footprint• Not dependent on fossil or nuclear fuels• No harmful CO2 emissions• Provides excellent weather protection to the building envelope• Secret fix option only, no visible fixing• Individual modules can be removed and replaced as necessary• Comprehensive design and technical support• Flashings and ancillaries are available in similar complementary
colours for a complete solution• Independently tested system, including CWCT external
building envelope • Available with the Total Benchmark Guarantee• Manufactured and supplied under a quality system certified
to bS En iSO 9001: 2000• Manufacturing plants are ISO 14001 (Environmentally) accredited
Wall MoDUlEphoTovolTaIC
TEChnICal ovErvIEW Material Description
Wall Powerpanel Module comprises one layer of 4mm glass with a 1.5mm tedlar backsheet, incorporating encapsulated solar cells.
product Tolerance
Wall Powerpanel Module cutting tolerance is +/- 1mm.
aluminium Secondary rail System
The extruded aluminium secondary rail system conforms to BS EN 12020-1: 2008 (Aluminium and aluminium alloys). Extruded precision profiles in alloys EN AW-6060 and En AW-6063. Technical conditions for inspection and delivery) - powder-coated black.
attachment
Extruded aluminium straps, conforming to BS EN 1220-1: 2008 in 6063/T6 grade alloy, are structurally bonded to the glass façade. Straps are secured to the aluminium secondary rail system using self-drilling/self-tapping stainless steel fasteners.
Feed-In Tariffs
Refer to the web address below for information.
Build option
Please refer to Build Option 1, shown on page 6.
Dimensions
Maximum module 1206mm length by 606mm height (inclusive of 8mm joint) and maximum actual panel size 1198mm length x 598mm height. Smaller bespoke sizes are available.
Face panel thickness: 5.5mm maximum.
Façade & rail Weight
Module size is dependent on project design requirements. For accurate weights for your specific application, contact the benchmark Technical Services Department.
WALL pOWERpAnEL MODuLE phoTovolTaIC | 1514
PROPOSED BENCHMARK FAÇADE SYSTEMS
Cementitious BoardsAvailable in 3 options:
1. Natura Pro• Natura Pro has a tactile, smooth surface which allows the natural variegation of the fibre cement finish to
be seen through the semi-translucent, pigmented coating. • A UV cured top layer offers good protection against graffiti
2. Textura• Textura combines vivid colour, texture and toughness in one fully compressed fibre cement cladding
panel. With a highly glazed, granular finish available in any factory-approved RAL colour, it is impact resistant yet strong, light in weight and easy to use.
3. Pictura• The new Pictura coating system incorporates an additional surface treatment for Fibre Cement panels. • The main characteristic of this treatment is the hard, smooth, silky, matt surface. • The UV cured top layer offers good protection against graffiti .
PROPOSED BENCHMARK FAÇADE SYSTEMS
Cementitious Boards
Colour / finish availability
PROPOSED BENCHMARK FAÇADE SYSTEMS
Cementitious Boards
TEChnICal ovErvIEWMaterial Description
Cementitious boards are fibre-reinforced cement boards that satisfy the requirements of Category A, Class 2 to BS EN 12467: 2004 (Fibre-cement flat sheets). Panels are manufactured by a batch-blending operation, followed by the Hatchek process and high-pressure steam autoclaving.
product Tolerance
Boards have a thickness tolerance of +/- 10%.
aluminium Secondary rail System
Secret Fix - The extruded aluminium straps or hooks, in 6063/T6 conforming to BS EN 12020-1: 2008 grade alloy, are secured to the boards using undercut stainless-steel expanding anchors. These are secured to the aluminium secondary rail system using either self-drilling / self-tapping stainless steel fasteners or hook on hangers. The secondary rail system is securely fastened to the Benchmark Karrier Panel with expanding self-fixing aluminium and stainless steel fasteners.
Through Fix - The boards are secured to the aluminium rail system using coloured aluminium rivets. The rail system is securely fastened to the Benchmark Karrier Panel with expanding self-fixing aluminium and stainless steel fasteners.
Fixings
For the through fix option, rivets and screws are available in the same colour as the panel, to disguise the fixings.
Fire
The cementitious boards achieve a Class 0 to BS476 - 6: 1989 (Fire propagation for products) and BS476 - 7: 1997 (Surface spread of flame of products) and have a European fire classification of A2-s1, d0.
Colours
Please refer to pages 54 and 55 to see the Natura Pro, Textura & Pictura colours.
Build option
Please refer to Build Option 1, shown on page 6.
Dimensions
Maximum module available after trimming by fabricator (including 10mm joint) is 2500 x 1250, 3100 x 1250 and 3100 x 1500*.
Face panel thickness: 8mm & 12mm.
*Only available in the Textura board.
Façade & rail Weight
Module size, thickness and railing are dependent on project design requirements. For accurate weights for your specific application, contact the benchmark Technical Services Department.
naTUra pro, TExTUra & pICTUra CEMEnTITIoUS BoarDS
bEnCHMARK TEChnICal
www.kingspanbenchmark.com/products/wall/cementitious-boards+44 (0) 800 970 9036 (UK) +353 (0) 42 969 8529 (Ireland)
For more information on this product
BEnEFITS• Smooth, granular or matt surfaces are available• A wide range of colour options • Choice of subtle pigmented surfaces• Easy to install• Excellent weather resistance• Resistant to insects, mould growth and fungi• Virtually maintenance free• Frost proof• Provides excellent weather protection to the building envelope• Secret fix and through fix options are available• Cementitious boards are BBA certified
• Individual modules can be removed and replaced as necessary• Comprehensive design and technical support• Flashings and ancillaries are available in similar complementary
colours for a complete solution• Independently tested system, including CWCT external
building envelope • Available with the Total Benchmark Guarantee• Manufactured and supplied under a quality system certified
to bS En iSO 9001: 2000• Manufacturing plants are ISO 14001 (Environmentally) accredited
InTroDUCTIonArchitectural cementitious boards offer the designer subtle shades of colour along with the crisp, clean lines required to create dynamic and attractive elevations.
A smooth semi-translucent, highly glazed granular finish and matt option is available from this range. A UV cured top layer (excluding Textura) offers good protection against many types of staining, mechanical damage during construction and graffiti.
Where a smooth unbroken surface is required, a concealed fixing option and a through fixing detail are available.
naTUra pro, TExTUra & pICTUra
CEMEnTiTiOuS bOARDS naTUra pro, TExTUra & pICTUra | 2120
Available in 4 options;
1. Metallics (15)2. Wood Decors (17)3. Naturals (6)4. Uni-colours (62)
Maximum module 4270mm length x 2130mm height and minimum panel size 200mm length x 400mm height (excluding the 10mm joint).
Face panel thickness: 8mm* and 13mm.*This thickness for face fixed applications only.
Standard and fire-rated options available
PROPOSED BENCHMARK FAÇADE SYSTEMS
Wood
Fixing arrangement dependant on wind load assessment
METEON
Typically 600 to 1200mm centres and 80mm edge distance
TEChnICal ovErvIEWMaterial Description
Trespa Meteon is a flat panel, based on thermosetting resins, homogeneously reinforced with wood based fibres and manufactured under high pressure and high temperatures. The panels have an integrated decorative surface using proprietary EbC technology.
product Tolerance
Thickness, flatness, straightness of edges, squareness, width and length are all in accordance with BS EN 438-2 (High-pressure decorative laminates (HpL) sheets based on thermosetting resins).
aluminium Secondary rail System
Secret Fix - The extruded aluminium straps or hooks, in 6063/T6 conforming to BS EN 12020-1: 2008 grade alloy, are secured to the boards using undercut stainless steel expanding anchors or self-tapping stainless steel screws into pre-drilled holes. These are secured to the aluminium secondary rail system using either self-drilling/ self-tapping stainless steel fasteners or hook on hangers. The secondary rail system is securely fastened to the insulated wall panel with expanding self-fixing aluminium and stainless steel fasteners.
Through Fix - The boards are secured to the aluminium rail system using coloured aluminium rivets. The rail system is securely fastened to the insulated wall panel with expanding self-fixing aluminium and stainless steel fasteners.
Fixings
For the through fix option, rivets and screws are available in the same colour as the panel, to disguise the fixings.
Fire
Type FR achieves a European fire classification of B-s2d0 and Type Standard achieves D-s2d0 to EN 438-7 (High-pressure decorative laminates (HpL). Sheets based on thermosetting resins (usually called laminates)).
Colours
Please refer to pages 56 to see a selection of colours from the uni colour range.
Build option
Please refer to Build Option 1, shown on page 6.
Dimensions
Standard modules are 3050mm length x 1530mm height and 2550mm length x 1860mm height (excluding the 10mm joint). Sizes are tailored to the build option, please contact the Benchmark Technical Service Department for further information.
Face panel thickness: 8, 10 & 13 mm.
Façade and rail Weight
Module size, thickness and railing are dependent on project design requirements. For accurate weights for your specific application, contact the benchmark Technical Services Department.
BEnEFITS• Versatile facade, near limitless design possibilities• Extremely weather resistant, tested to EN 438-2: 29• Very high resistance to impact damage• Through fix and secret fix facade options • Virtually maintenance free • Comprehensive design and technical support• Flashings and ancillaries are available in similar complementary
colours for a complete solution
• Individual facades can be removed and replaced as necessary• Independently tested system, including CWCT external
building envelope • Available with the Total Benchmark Guarantee• Manufactured and supplied under a quality system certified to
bS En iSO 9001: 2000• Manufacturing plants is ISO 14001 (Environmentally) accredited
InTroDUCTIonThe Benchmark system offering includes Trespa Meteon’s architectural panels, which are available in a wide choice of standard colours, effects and finishes – or they can be custom-made.
These panels have the ability to transform, enhance or add new dimensions to your design. Literally thousands of applications around the world bear testimony to the material’s versatility. Trespa Meteon is not just beautiful – it is exceedingly robust and durable so today’s vision will remain tomorrow’s reality.
WooD
bEnCHMARK TEChnICal
www.kingspanbenchmark.com/products/wall/wood+44 (0) 800 970 9036 (UK) +353 (0) 42 969 8529 (Ireland)
For more information on this product
TrESpa
architect: hoK location: Springdale, USa
architect: henry J lyons & partners location: Ennis, Ireland
WOOD TrESpa | 2322
Available in 4 species;1. Siberian Larch2. Sweet Chestnut3. Accoya4. Western Red Cedar
PROPOSED BENCHMARK FAÇADE SYSTEMS
Timber Panel
PROPOSED BENCHMARK FAÇADE SYSTEMS
Timber Panel
Siberian Larch & Sweet Chestnut
21mm Thick VT1/2/3/4/8/ & VT302
Accoya & Western Red Cedar
17mm thickT1/2/3/4/VT6, VT7,VT8/ VT9b, VT10b & VT302
PROPOSED BENCHMARK FAÇADE SYSTEMS
Timber Panel
BEnEFITS• Sourced from sustainable forests with PEFC (Programme
for the Endorsement of Forest Certification) or FSC (Forest Stewardship Council) certification
• Available in transparent and opaque coatings on a wide variety of timber substrates, including fire retardant treatments
• A variety of profiles are available in each wood type • Virtually maintenance free • Retains natural strength and beauty• Environmentally compatible, 100% recyclable and naturally
renewable
• Provides excellent weather protection to the building envelope• Secret fix and through fix options are available• Comprehensive design and technical support• Ancillaries are available in the same material for a
complete solution• Independently tested system, including CWCT external
building envelope • Available with the Total Benchmark Guarantee• All manufacturing occurs under strict quality control guidelines,
providing high performance materials
InTroDUCTIonBenchmark timber provides a natural look to your building with warm colours and textures.
Timber is available in Accoya, Siberian Larch, Sweet Chestnut and Western Red Cedar. Lightweight and fast to install the façade is an ideal solution for fast-track building schemes.
TIMBErWooD
bEnCHMARK TEChnICal
www.kingspanbenchmark.com/products/wall/wood+44 (0) 800 970 9036 (UK) +353 (0) 42 969 8529 (Ireland)
For more information on this product
TIMBEr
TEChnICal ovErvIEWMaterial Description
Sustainable source natural timber, varying from hard to softwood, cut to order.
product Tolerance
Timber machine cutting tolerances of +/- 0.5mm for the width and thickness, and a cross cutting to set length +/- 1mm.
Fixings
Stainless steel fixings ideally small round headed annular ring shank nails.
Note: Non ferrous metals should not be used with Western Red Cedar.
Fire
Fire ratings can vary, please refer to the website for guidance.
Colours
Siberian larch – pale honey to reddish brown. Relates to the heartwood of the wood. Most timbers vary in colour and will change with use, the application of finishes and exposure to light.
Sweet Chestnut – Pale golden brown to biscuit, some dark brown stain can be present, ages to silver grey if left unprotected.
accoya – pale cream with brownish tones, allowing light translucent colours to be applied.
Western red Cedar – Reddish brown (Ages to silver grey if left unprotected).
Build option
Please refer to Build Option 1, shown on page 6.
Dimensions
Lengths can range from 1.2m to 6.0m but can vary. Please contact the Benchmark Technical Department for further information.
Face panel thickness: 21mm (Siberian Larch & Sweet Chestnut), 17mm (Accoya & Western Red Cedar).
Façade Weight
Module size, thickness are dependent on project design requirements. For accurate weights for your specific application, contact the benchmark Technical Services Department.
WOOD TIMBEr | 2524
PROPOSED BENCHMARK PANEL SYSTEMS
VARI-GROOVE
We can apply one, two or three additional false joints to the panels1000 & 900 Optimo only
The middle rib is in a fixed central position (but roll-former can be lowered or raised), but the next two ribs are variable (independently). To a minimum position of 75mm either side of the centre line =.“150mm rib to rib”. To a max outer position of “385mm from the centre line = “770mm rib to rib” .
VARI-WIDTH
Optimo and all other AWP profiles available in any width from 580mm to 1189mm cover width in mm increments (50mm increments for WV and EB).
D-END
Panel available with return edges
Optimo
PROPOSED BENCHMARK PANEL SYSTEMS
Optimo - Varigroove
BEnEFITS• Provides Property & Business Protection - Loss Prevention
Certification Board (LPCB) LPS 1181 certified insurer approved FiREsafe systems deliver certainty of performance and insurability
• Available in cover widths from 600 up to 1000mm in 1mm increments
• Suitable for vertical or horizontal applications• Architecturally enhancing ancillary package• Accelerated build speed through pre-engineered, single
component, single-fix installation• ECOsafe, environmentally sustainable panel system which can
achieve a Green Guide ‘A+’ rating
• Easily accommodates openings, penetrations and
complex façades• Simple integration with doors, windows, glazing, louvres
and traditional construction materials • Lifetime insulation continuity, thermal performance and
airtightness (less than 5m3/hr/m2) certainty• Independently tested system, including CWCT external
building envelope• Available with the Total Benchmark Guarantee• Manufactured and supplied under a quality system certified
to bS En iSO 9001: 2000• Manufacturing plants are ISO 14001 (Environmentally) accredited
InTroDUCTIonOptimo insulated panels can be used to create a stylishly sleek look to the building profile.
The system is easily integrated into other interfaces allowing variations in colour, texture and profile to be easily achieved. New variations and colours are available for Optimo insulated panels, including dual tone and diamond sparkle.
Dimensions
600-1000mm cover widths
Thermal performance
* Recommended thicknesses to allow compliance with Building Regulations Approved Documents L2A & L2B (England & Wales), Technical Handbooks Domestic and Non-domestic Section 6 (Scotland) (with the exeption of 60mm thick), part F2 (northern ireland) and part L (Republic of Ireland - based on the Overall Heat Loss Method).^ panel weight only.
Fire
panels are FiREsafe approved by the Loss Prevention Certification board (LpCb) to LpS 1181 grade EXT-b.
The external and internal faces of the panels are Class 0 in accordance with the Building Regulations when tested to BS 476-6: 1989 (Fire propagation for products) and BS 476-7: 1997 (Surface spread of flame of products) and have a European fire classification of b-s2, d0.
acoustics
Optimo insulated panels have a single-figure weighted sound reduction Rw = 24dB.
Colours
Optimo ia available in a wide range of colours, including Diamond (shown on page 58), Dual Tone (shown on page 59) and Spectrum (shown on page 60), amongst others.
Build option
Please refer to Build Option 2, shown on page 7.
opTIMoInSUlaTED panEl opTIMo
TEChnICal ovErvIEW
bEnCHMARK www.kingspanbenchmark.com/products/wall/insulatedpanel+44 (0) 800 970 9036 (UK) +353 (0) 42 969 8529 (Ireland)
available lengths
Standard lengths 1.8 to 12 metres. Panel lengths up to 17 metres are available. Panels less than 1.8m long can be supplied and are subject to an additional charge. These panels cannot be end lapped.
panel features
Optimo is available with a range of different tophat options, including coated steel and aluminium. Different variations of Optimo are available:• De Ended - a metal covered panel edge, eradicating the
corner joint• Curved Panel - for curved elevations• Cranked Panel - pre-formed corners (top image shown below)• Variable Width - panels available from 600 to 1000mm in
1mm increment• Vari Groove - a fake joint giving the illusion of using smaller
width panels whilst retaining thermal and airtightness performance benefits of the full width panel
Core Thickness (mm) 45 60 70 80 100 120 140
U-value (W/m2K) 0.54 0.35* 0.30* 0.27* 0.21* 0.18* 0.15*
Weight kg/m2 ^ 10.9 11.5 11.9 12.3 13.1 13.9 14.6
inSuLATED pAnEL opTIMo | 2928
BEnEFITS• Property & Business Protection - Loss Prevention Certification
Board (LPCB) LPS 1181 certified insurer approved FIREsafe systems deliver certainty of performance and insurability
• Available in 22 different colours from the Spectrum colour finish
• Suitable for vertical or horizontal applications• Accelerated build speed through pre-engineered, single
component, single-fix installation• ECOsafe, environmentally sustainable panel system which
can achieve a Green Guide ‘A+’ rating• Easily accommodates openings, penetrations and
complex façades
• Simple integration with doors, windows, glazing, louvres
and traditional construction materials • Lifetime insulation continuity, thermal performance and
airtightness (less than 5m3/hr/m2) certainty• Independently tested system, including CWCT external
building envelope• Available with the Total Benchmark Guarantee• Manufactured and supplied under a quality system certified
to bS En iSO 9001: 2000• Manufacturing plants are ISO 14001 (Environmentally)
accredited
available lengths
Standard lengths 1.8 to 17 metres. panels less than 1.8m long can be supplied and are subject to an additional charge.These panels cannot be end lapped.
panel features
Unique detailing is available for the Curvewall insulated panels:
pre-formed mitred corners are available for horizontally or vertically laid panels. They consist of mitred cut panel edges which are factory bonded and can be used for internal and external corners. Standard panel lengths will vary, please contact the benchmark Technical Services for details.
A fin feature (folded vertical fin flashing) can be installed at the vertical joint between horizontally laid panels. Available in Spectrum coatings, and 2mm PPC Aluminium.
The fin is fabricated with PIR insulation and an internal air seal gasket, ensuring airtightness and insulation properties are maintained.
A variety of corner and tophat features are also available. For more information on the features range, please contact benchmark Technical Services Department.
Build option
Please refer to Build Option 2, shown on page 7.
1000mm cover width only
200mm
38m
m
Cor
eth
ickn
ess
CUrvEWallInSUlaTED panEl
bEnCHMARK TEChnICal
www.kingspanbenchmark.com/products/wall/insulatedpanel+44 (0) 800 970 9036 (UK) +353 (0) 42 969 8529 (Ireland)
For more information on this product
Dimensions
InTroDUCTIonCurvewall provides a contemporary curved profile with all the benefits of a PIR insulated panel system.
Suitable for horizontal or vertical application, it can be easily integrated with other panels. Panels are secretly fixed to create a visual impact for almost all building applications.
CUrvEWall
Thermal performance
* Recommended thicknesses to allow compliance with Building Regulations Approved Documents L2A & L2B (England & Wales), Technical Handbooks Domestic and Non-domestic Section 6 (Scotland), Part F2 (Northern Ireland) and Part L (Republic of Ireland - based on the Overall Heat Loss Method). ** Subject to minimum order quantity.^ panel weight only.Note: The U-values for Curvewall have been calculated taking the external profiles into account to illustrate the additional thermal benefits. These U-values can be used where the full elevation is Curvewall. Where its used in conjunction with Optimo, Louvre, Render Panel or the Benchmark Karrier Panel, the U-value applicable for these products should be used instead.
Fire
panels are FiREsafe approved by the Loss Prevention Certification board (LpCb) to LpS 1181 grade EXT-b.
The external and internal faces of the panels are Class 0 in accordance with the Building Regulations when tested to BS 476-6: 1989 (Fire propagation for products) and BS 476-7: 1997 (Surface spread of flame of products) and have a European fire classification of b-s2, d0.
acoustics
All Curvewall panels have a predicted single-figure weighted sound reduction Rw = 24dB.
Colours
Standard colour is Metallic Silver Spectrum. Other colours from the Spectrum colour range are available upon request, please contact the Quotations Department for minimum order quantity, costing and lead times. A selection of Spectrum colours are shown on page 60.
.
TEChnICal ovErvIEW
Core Thickness (mm) 45 60 70 80 100 120 140**
U-value (W/m2K) 0.43 0.29* 0.26* 0.23* 0.19* 0.16* 0.14*
Weight kg/m2 ^ 11.8 12.4 12.8 13.2 14.0 14.8 15.6
inSuLATED pAnEL CUrvEWall | 3130
available lengths
Standard lengths 1.8 to 17 metres. panels less than 1.8m long can be supplied and are subject to an additional charge. These panels cannot be end lapped.
panel features
Unique detailing is available for the Louvre insulated panels:
pre-formed mitred corners are available for horizontally or vertically laid panels. They consist of mitred cut panel edges which are factory bonded and can be used for internal and external corners. Standard panel lengths will vary, please contact benchmark Technical Services for details.
A fin feature (folded vertical fin flashing) can be installed at the vertical joint between horizontally laid panels. Available in XL Forte and Spectrum coatings, and 2mm PPC Aluminium.
The fin is fabricated with PIR insulation and an internal air seal gasket, ensuring airtightness and insulation properties are maintained.
A variety of corner and tophat features are also available. For more information on the features range, please contact benchmark Technical Services Department.
Build option
Please refer to Build Option 2, shown on page 7.
18m
m 100mm
1000mm cover width only
Cor
eth
ickn
ess
loUvrEInSUlaTED panEl
bEnCHMARK TEChnICal
www.kingspanbenchmark.com/products/wall/insulatedpanel+44 (0) 800 970 9036 (UK) +353 (0) 42 969 8529 (Ireland)
For more information on this product
Dimensions
loUvrE
Thermal performance
* Recommended thicknesses to allow compliance with Building Regulations Approved Documents L2A & L2B (England & Wales), Technical Handbooks Domestic and Non-domestic Section 6 (Scotland) (with the exeption of 60mm thick), part F2 (northern ireland) and part L (Republic of Ireland - based on the Overall Heat Loss Method). ** Subject to minimum order quantity.^ panel weight only.Note: The U-values for Louvre have been calculated taking the external profiles into account to illustrate the additional thermal benefits. These U-values can be used where the full elevation is Louvre. Where its used in conjunction with Optimo, Render Panel or the Benchmark Karrier Panel, the U-value applicable for these products should be used instead.
Fire
panels are FiREsafe approved by the Loss Prevention Certification board (LpCb) to LpS 1181 grade EXT-b.
The external and internal faces of the panels are Class 0 in accordance with the Building Regulations when tested to BS 476-6: 1989 (Fire propagation for products) and BS 476-7: 1997 (Surface spread of flame of products) and have a European fire classification of b-s2, d0.
acoustics
All Louvre panels have a predicted single-figure weighted sound reduction Rw = 24dB.
Colours
Standard colours are Metallic Silver, Obsidian and Onyx from the Spectrum colour range and Goosewing Grey and Bottle Green from the XL Forte colour range. Other colours from both colour ranges are available upon request, please contact the Quotations Department for minimum order quantity, costing and lead times. Colour ranges are shown on pages 60 to 61.
TEChnICal ovErvIEW
Core Thickness (mm) 45 60 70 80 100 120 140**
U-value (W/m2K) 0.49 0.33* 0.28* 0.25* 0.20* 0.17* 0.15*
Weight kg/m2 ^ 12.4 13.0 13.4 13.8 14.6 15.4 16.2
InTroDUCTIonLouvre PIR insulated panels are an attractive solution suitable for almost all building applications.
Panels can be laid horizontally or vertically and are secretly fixed, providing a contemporary visual impact with the assurance of airtightness and a lifetime of continuous thermal performance.
BEnEFITS• Property & Business Protection - Loss Prevention Certification
Board (LPCB) LPS 1181 certified insurer approved FIREsafe systems deliver certainty of performance and insurability
• Over 50 colours are available from the Spectrum and XL Forte colour ranges
• Suitable for vertical or horizontal application• Accelerated build speed through pre-engineered, single
component, single-fix installation• ECOsafe, environmentally sustainable panel system
which can achieve a Green Guide ‘A+’ rating• Easily accommodates openings, penetrations and
complex façades
• Simple integration with doors, windows, glazing, louvres
and traditional construction materials • Lifetime insulation continuity, thermal performance and
airtightness (less than 5m3/hr/m2) certainty• Independently tested system, including CWCT external
building envelope• Available with the Total Benchmark Guarantee• Manufactured and supplied under a quality system certified
to bS En iSO 9001: 2000• Manufacturing plants are ISO 14001 (Environmentally)
accredited
inSuLATED pAnEL loUvrE | 3332
Thermal performance
Core Thickness (mm) 45 60 70 80 100 120 140
U-value (W/m2K) 0.54 0.35* 0.30* 0.27* 0.21* 0.18* 0.15*
Weight kg/m2 ^ 13.5 14.1 14.5 14.9 15.7 16.5 17.3
InTroDUCTIon Render Panel is a PIR insulated panel that enables you to create a visual impact whatever the build. Render panels are easily integrated and compatible with other insulated panels, giving you greater design flexibility.
The panels provide an ideal solution for apartments, offices, education, healthcare and leisure facilities. Available for horizontal or vertical applications and in cover widths of 600 up to 1000mm in 1mm increments. internal and external pre-formed corners, curved panels and ancillaries can be rendered. Controlled factory conditions ensure every panel is consistent in colour, texture and flatness.
BEnEFITS• The pre-rendered coating has a life expectancy of up to
40 years*• Innovative joint gasket minimises visual impact• A non-gasket version is available to emphasise the joint• Suitable for vertical or horizontal application• Factory applied render creates consistency of colour, texture
and flatness over the whole elevation• The rendered texture is also available on long spanning frame
to frame insulated wall panel system• Less vulnerable to weather interruptions and associated
variations in finish than traditional wet applied render• Available in cover widths from 600 up to 1000mm in
1mm increments• Durability / weather testing to DIN 5021 & BS EN ISO 9227
salt spray and Din 52104 for Freeze/Thaw• Property & Business Protection - Loss Prevention Certification
Board (LPCB) LPS 1181 certified insurer approved FIREsafe systems deliver certainty of performance and insurability
• ECOsafe, environmentally sustainable PIR insulation core,
low GWP (Global Warming Potential) and non-deleterious• Easily accommodates openings, penetrations and
complex façades• Simple integration with doors, windows, glazing, louvres
and traditional construction materials • Lifetime insulation continuity, thermal performance and
airtightness (less than 5m3/hr/m2) certainty• Independently tested system, including CWCT external
building envelope• Available with the Total Benchmark Guarantee• Manufactured and supplied under a quality system certified
to bS En iSO 9001: 2000• Manufacturing plants are ISO 14001 (Environmentally)
accredited*NB - Coating will require repainting every ten years in order to comply with guarantee.
available lengths
Standard lengths 1.8 to 8 metres. Panel lengths up to 16 metres are available. Panels less than 1.8m long can be supplied and are subject to an additional charge. These panels cannot be end lapped.
600-1000mm cover widths
bEnCHMARK TEChnICal
www.kingspanbenchmark.com/products/wall/render+44 (0) 800 970 9036 (UK) +353 (0) 42 969 8529 (Ireland)
For more information on this product
rEnDEr panElrEnDEr
Dimensions
rEnDEr panEl
* Recommended thicknesses to allow compliance with Building Regulations Approved Documents L2A & L2B (England & Wales), Technical Handbooks Domestic and Non-domestic Section 6 (Scotland) (with the exception of 60mm thick), part F2 (northern ireland) and part L (Republic of Ireland - based on the Overall Heat Loss Method). ^ panel weight only.
Fire
panels are FiREsafe approved by the Loss Prevention Certification board (LpCb) to LpS 1181 grade EXT-b.
The internal face of the insulated panel is Class 0 in accordance with the Building Regulations when tested to BS 476-6: 1989 (Fire propagation for products) and BS 476-7: 1997 (Surface spread of flame of products). The external rendered steel facing is Class 3 when tested to surface spread of flame to BS476-7: 1987 (Surface spread of flame of products) and have a European fire classification of B-s2, d0.
acoustics
Panels have a predicted single-figure weighted sound reduction Rw = 24dB.
Colours
For colours options, please visit the web link shown below.
Build option
Please refer to Build Option 2, shown on page 7.
TEChnICal ovErvIEW
inSuLATED pAnEL rEnDEr panEl | 3534
CEraMIC GranITECEraMIC
bEnCHMARK TEChnICal
www.kingspanbenchmark.com/products/wall/ceramic+44 (0) 800 970 9036 (UK) +353 (0) 42 969 8529 (Ireland)
For more information on this product
BEnEFITS• A patented manufacturing process achieves individual veining
on the tiles replicating that of quarried stone• Benchmark will cut Ceramic Granite to your project
dimensions, openings and features• Ceramic Granite is highly resistant to moisture and frost• Loadings on the substrate and building exterior are reduced
in comparison with naturally quarried stone• The Ceramic Granite is completely resistant to light and
uV radiation• The Ceramic Granite is highly resistant to algae growth
and does not accumulate dust• Virtually maintenance free
• Provides excellent weather protection to the building envelope• Secret fix option only, no visible fixing• Individual modules can be removed and replaced as necessary• Comprehensive design and technical support• Flashings and ancillaries are available in similar complementary
colours for a complete solution• Independently tested system, including CWCT external
building envelope • Available with the Total Benchmark Guarantee• Manufactured and supplied under a quality system certified
to bS En iSO 9001: 2000• Manufacturing plants are ISO 14001 (Environmentally) accredited
InTroDUCTIonCeramic Granite provides an attractive solution available in a wide choice of colours in veined or grained variations that replicate the appearance of granite and marble.
Finished in natural unpolished, satin pre-polished, mirror polished or metallic. Exceptionally hardwearing and cost effective, protecting both your building and budget.
CEraMIC GranITE
TEChnICal ovErvIEWMaterial Description
The ceramic granite is typically refined clays, quartz, feldspars and metal oxides vitrified under high temperature and pressure, with mesh reinforcement to rear face.
product Tolerance
Thickness, sides straightness, rectangularity and surface flatness are all in accordance with bS En 14411: 2003 (Ceramic tiles Annex g (Dry-pressed ceramic tiles with low water absorption group Bla).
aluminium Secondary rail System
The extruded aluminium secondary rail system conforms to BS EN 12020-1: 2008 (Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and En AW-6063. Technical conditions for inspection and delivery) - powder coated black.
attachment
The extruded aluminium straps, conforming to BS EN 12020-1: 2008 in 6063/T6 grade alloy, are secured to the ceramic granite façade panel using undercut stainless steel expanding anchors. Straps are secured to the aluminium secondary rail system using self-drilling / self-tapping stainless steel fasteners. The secondary rail system is securely fastened to the Benchmark Karrier Panel with expanding self-fixing aluminium and stainless steel fasteners.
Fire
The ceramic granite façades have Class 1 fire rating to BS 476-7: 1997 (Surface spread of flame of products), and are Class 0 as defined by Building Regulations.
Colours
please refer to page 52 to see the metallic, polished and unpolished finishes.
Build option
Please refer to Build Option 1, shown on page 6.
Dimensions
Maximum module 1206mm length x 606mm height (inclusive of 8mm joint) and maximum actual panel size 1198mm length x 598mm height. Smaller bespoke sizes are available.
Face panel thickness: 12mm maximum.
Façade & rail Weight
Module size is dependent on project design requirements. For accurate weights for your specific application, contact the benchmark Technical Services Department.
CERAMiC CEraMIC GranITE | 1716
CEraMIC TIlECEraMIC
bEnCHMARK TEChnICal
www.kingspanbenchmark.com/products/wall/ceramic+44 (0) 800 970 9036 (UK) +353 (0) 42 969 8529 (Ireland)
For more information on this product
BEnEFITS• Offers design flexibility• Easily integrates with other façades• Fast and simple installation• Secret fix only, individual tiles clip onto the railing system• Has a hydrotect surface coating, ensuring an ageless
appearance, long term minimum maintenance and is able to remove harmful oxides from the atmosphere
• Frost proof• Light and colour-fast, resistant to UV light• Low water absorption (3% < E > 6%)• Resistance to aggressive environmental effects
• Comprehensive design and technical support• Flashings and ancillaries are available in the same material
for a complete solution• Independently tested system, including CWCT external
building envelope • Available with the Total Benchmark Guarantee• Manufactured and supplied under a quality system certified
to bS En iSO 9001: 2000• Manufacturing plants are ISO 14001 (Environmentally)
accredited
InTroDUCTIonCeramic Tile is the ideal choice for creating a contemporary, stylish façade. Tiles are available in a large range of surfaces and sizes to support a myriad of design possibilities.
In addition to its aesthetics, the system provides a cost-effective solution. The façade is fast to install, easy to integrate and fully guaranteed.
CEraMIC TIlE
TEChnICal ovErvIEWMaterial Description
The Ceramic Tile is an extruded ceramic panel according to DIN En 14411: 2003 (Ceramic tiles Annex g (Dry-pressed ceramic tiles with low water absorption group Bla)), fired at 1250ºC.
product Tolerance
Thickness, sides straightness, rectangularity and surface flatness are all in accordance with DIN EN 14411: 2003. There is a natural material tolerance, hence colour can vary.
aluminium Secondary rail System
The extruded aluminium secondary rail system conforms to BS EN 12020-1: 2008 (Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 T66. Technical conditions for inspection and delivery).
attachment
Ceramic Tiles are put into position using a mounting tool. The secondary rail system is securely fastened to the Benchmark Karrier Panel with expanding self-fixing aluminium and stainless steel fasteners.
Fire
The Ceramic Tile façades have a Class A1 rating, and are non-combustible as defined by Building Regulations.
Colours
Most popular colours are shown on page 53. Glazed and unglazed options are available. Please see the web page below to see the full range.
Build option
Please refer to Build Option 1, shown on page 6.
Dimensions
There are five different tile sizes available: 400x200mm, 500x250mm, 500x280mm, 600x250mm and 600x280mm.
Face panel thickness: 15mm maximum.
Façade & rail Weight
Module size is dependent on project design requirements. For accurate weights for your specific application, contact the benchmark Technical Services Department.
CERAMiC CEraMIC TIlE | 1918
WooD CoMpoSITEWooD
bEnCHMARK TEChnICal
www.kingspanbenchmark.com/products/wall/wood+44 (0) 800 970 9036 (UK) +353 (0) 42 969 8529 (Ireland)
For more information on this product
BEnEFITS• The natural wood veneer is sourced from sustainably
managed forests• Graffiti proof, specifically designed to resist chemical attacks• 10 year colourfast guarantee to Class 3 according to
BS EN 20105-A02: 1995 (Textiles. Tests for colour fastness. Grey scale for assessing change in colour)
• Independent durability and weathering tests completed by Taylor Woodrow to recognised industry standards
• Available in a range of colours• Virtually maintenance free• Provides excellent weather protection to the building envelope
• Secret fix and through fix options are available• Individual modules can be removed and replaced as necessary• Comprehensive design and technical support• Flashings and ancillaries are available in similar complementary
colours for a complete solution• Independently tested system, including CWCT external
building envelope • Available with the Total Benchmark Guarantee• Manufactured and supplied under a quality system certified
to bS En iSO 9001: 2000• Manufacturing plants are ISO 14001 (Environmentally)
accredited
InTroDUCTIonThe Wood Composite façade is a high pressure laminate cladding manufactured with a real wood veneer which exhibits all the natural variation, warmth and beauty of real wood.
The panels are coated with a proprietary coating, based in synthetic resins and PVDF, which protect the panel from the effects of sunlight, chemical attack (anti-graffiti) and the damage caused by atmospheric agents.
A smooth concealed fixing system can be used, and a through fix option is also available to create the desired look.
WooD CoMpoSITE
TEChnICal ovErvIEWMaterial Description
Wood Composite façades have a thermosetting phenolic resin bonded cellulose fibre core. This is faced with natural wood that has been coated with a proprietary acrylic resin - pVDF uV protective finish.
natural Wood
The natural wood is typically Ayous or Okume and comes from a sustainable source.
anti-graffiti
Specifically designed to resist chemical attack (anti-graffiti), the Wood Composite façade is BM Trada Q Marked (Cert CE/F04151).
product Tolerance
Thickness, length and width, edge straightness and squareness are all in accordance with BS EN 438 (High-pressure decorative laminates (HPL) Sheets based on thermosetting resins (Usually called Laminates) part 2: Determination of properties).
aluminium Secondary rail System
The extruded aluminium secondary rail system is tested to BS 1474: 1987 (Specification for wrought aluminium and aluminium alloys for general engineering purposes) in 6063/T6 grade alloy.
attachment
The extruded aluminium straps tested to BS 1474 in 6063/T6 grade alloy are secured to the Wood Composite façade panel using undercut stainless steel expanding anchors. Straps are secured to the aluminium secondary rail system using self drilling / self tapping stainless steel coated black screws.
Fire
The Wood Composite façade panels have a Class 3 fire rating to BS476 - 6: 1989 (Fire propagation for products) and BS476 - 7: 1997 (Surface spread of flame of products).
Colours
please refer to page 57 to view the complete range.
Build option
Please refer to Build Option 1, shown on page 6.
Dimensions
Maximum module 1206mm length x 606mm height (inclusive of 8mm joint) and maximum actual panel size 1198mm length x 598mm height.
Face panel thickness: 10mm maximum.
Façade & rail Weight
Railing system is dependent on project design requirements. For accurate weights for your specific application, contact the benchmark Technical Services Department.
WOOD WooD CoMpoSITE | 2726
InTroDUCTIon Roof Powerpanel Module uses solar photovoltaics to generate clean energy for buildings. Once installed every kW produced by PV has zero carbon emissions, helping to reduce environmental impact as well as energy costs.
Roof PowerPanel Module consists of insulated roof panels with a silver aluminium frame mounted module. It is suitable for pitched roof applications on new build or refurbishment projects.
BEnEFITS• Flexibility to be mounted on any Benchmark/Kingspan insulated
roof profile • Integrated bypass diodes to minimise shading effects• Available in approx 125 to 145 Wp output per m2 installed• A Roof Powerpanel laminate option is also available• Quick and easy site connection using ‘push together’ connectors• Single-source integrated roof, wall, façade and solar PV provider• Installed by MCS approved contractors• Optimised, value-engineered systems for rapid installation• Project analysis / viability, design, supply, installation, testing,
commissioning and handover service• Virtually maintenance free• Generates clean, inflation proof electricity – reduces
energy costs
• Can increase the saleable / rentable value of the building• Once installed every kW produced has zero carbon emissions,
which significantly reduces the carbon footprint• Not dependent on fossil or nuclear fuels• No harmful CO2 emissions• Lifetime insulation continuity, thermal performance and
airtightness (less than 5m3/hr/m2) certainty• Available with the Total Benchmark Guarantee• Manufactured and supplied under a quality system certified to
bS En iSO 9001: 2000• Manufacturing plants are ISO 14001 (Environmentally) accredited
bEnCHMARK TEChnICal
www.kingspanbenchmark.com/products/roof/photovoltaic+44 (0) 800 970 9036 (UK) +353 (0) 42 969 8529 (Ireland)
For more information on this product
* Recommended thicknesses to allow compliance with Building Regulations Approved Documents L2A & L2B (England & Wales), Technical Handbooks Domestic and Non-domestic Section 6 (Scotland), Part F2 (Northern Ireland) and Part L (Republic of Ireland - based on the Overall Heat Loss Method).
Note: Roof powerpanel Modules installed on Kingspan’s KS1000 RW Trapezoidal insulated panel. please contact the benchmark Technical Services Department for other panels.
Fire
The Trapezoidal insulated roof panels have steel outer and inner facings that have a Class 1 surface spread of flame to BS 476-7: 1997, are Class 0, as defined by Building Regulations and have a European fire classification of B-s2, d0.
The panels must be rated SAA when tested to BS476: Part 3: 1975 and have passed all the requirements of LPS1181: 2003: Part 1: Issue 1, ceiling lining tests.
acoustics
The Trapezoidal insulated roof panels have a single-figure weighted sound reduction Rw = 25dB.
Feed-In Tariffs
Refer to the web address below for information.
rooF poWErpanEl
Dimensions
TEChnICal ovErvIEW
Build option
The insulated panel can be installed purlin to purlin. Please contact the benchmark Technical Services Department for further information.
available sizes
Maximum module 1652mm length by 994mm width (including the framework). Smaller bespoke sizes are available.
Module Thickness ranges from 46mm to 50mm.
Trapezoidal standard lengths 1.8 up to 12 metres. Lengths over 12 metres up to 22.1 metres can be supplied but are subject to an additional transport charge. 22.1 to 29.3m can be supplied subject to transport restrictions.
pv Module & rail Weight
Module size & thickness are dependent on project design requirements. For accurate weights for your specific application, contact the benchmark Technical Services Department.
Thermal performance
Core Thickness (mm) 40 50 60 70 80 100 120
U-Value (W/m2K) 0.46 0.38 0.35 0.30 0.25* 0.20* 0.16*
Weight kg/m2 0.5/ 0.4 steel 9.9 10.3 10.7 11.0 11.5 12.3 13.1
Weight kg/m2 0.63/0.4 steel 11.8 12.2 12.6 12.9 13.4 14.2 15.0
Weight kg/m2
0.9/0.5 alum. 5.6 6.0 6.4 6.7 7.2 8.0 8.8
rooF MoDUlEphoTovolTaIC
pHOTOVOLTAiCS rooF poWErpanEl | 3938
EnvIroDEKGrEEn rooF
bEnCHMARK TEChnICal
www.kingspanbenchmark.com/products/roof/green-roof+44 (0) 800 970 9036 (UK) +353 (0) 42 969 8529 (Ireland)
For more information on this product
40mm
160mm
66mm
1000mm cover width
available lengths
Standard lengths 1.8 up to 14 metres. Lengths over 14 metres up to 16 metres can be supplied but are subject to an additional transport charge.
Thermal performance
Core Thickness (mm) 66
U-Value (W/m2K) 0.25*
Weight kg/m2 21.3
* Recommended thicknesses to allow compliance with Building Regulations Approved Documents L2A & L2B (England & Wales), Technical Handbooks Domestic and Non-domestic Section 6 (Scotland), Part F2 (Northern Ireland) and Part L (Republic of Ireland - based on the Overall Heat Loss Method).
Fire
Steel inner and outer facings have a predicted Class 1 surface spread of flame to BS476 Part 7: 1987, and are class 0 as defined by building regulations. The panel surfaces are rated FAA/SAA to bS476:part 3:1975.
acoustics
All Envirodek panels have a predicted single-figure weighted sound reduction Rw = 27dB.
Build option
The panels can be installed rafter to rafter or purlin to purlin. please contact the benchmark Technical Services Department for further information.
Dimensions
TEChnICal ovErvIEW
InTroDUCTIon Envirodek is a PIR insulated roof deck that has been specifically designed for green roof systems. Envirodek gives you the ability to transform urban space into a greener environment.
Used increasingly on buildings such as schools, healthcare and city centre buildings for a visual effect or to create a useable space, Envirodek provides the right impact, enhancing thermal and acoustic performance with less effect on sustainability than traditional systems.
EnvIroDEK
BEnEFITS• Cost effective• Quick and safe to install• Well insulated and energy efficient• Building is quickly weather tight• Lightweight• Installation rates of up to 1000m2 per day with the aid
of mechanical handling equipment• Double spans of up to 6m can be achieved depending
upon load and roof type
• Suitable for curved roofs down to 15m concave and
30m convex radius• Envirodek is a member of the
green Roof Organisation (gRO)• Lifetime insulation continuity, thermal performance and
airtightness (less than 5m3/hr/m2) certainty• Available with the Total Benchmark Guarantee• Manufactured and supplied under a quality system certified
to bS En iSO 9001: 2000• Manufacturing plants are ISO 14001 (Environmentally)
accredited
gREEn ROOF EnvIroDEK | 4140
rooFlInErSTanDInG SEaM
bEnCHMARK TEChnICal
www.kingspanbenchmark.com/products/roof/standing-seam+44 (0) 800 970 9036 (UK) +353 (0) 42 969 8529 (Ireland)
available lengths
Standard lengths are from 1.8 to 12 metres. 12 to 16.5 metres can be supplied but are subject to additional transport surcharge.
600 / 1100mm cover width
Dimensions
TEChnICal ovErvIEW
Thermal performance
Core Thickness (mm) 80 100 125 150 175 200
U-Value (W/m2K) 0.25* 0.20* 0.16* 0.14* 0.12* 0.10*
Weight kg/m2^ 13.6 14.4 15.4 16.4 17.4 18.4
* Recommended thicknesses to allow compliance with Building Regulations Approved Documents L2A & L2b (England & Wales), Technical Handbooks Domestic and non-domestic Section 6 (Scotland), Part F2 (Northern Ireland) and Part L (Republic of Ireland - based on the Overall Heat Loss Method). These U-values are based on a 1100mm wide panel with Stainless Steel fixings.
^ Weights are based on 0.7mm external metal sheet and 0.5mm internal liner.
Fire
The steel outer and inner facings have Class 1 surface spread of flame to BS 476-7: 1997 (Surface spread of flame of products), are Class 0, as defined by Building Regulations and have a European fire classification of B-s2, d0.
acoustics
Roofliner panel has a predicted single-figure weighted sound reduction Rw = 24dB.
Build option
The panels can be installed rafter to rafter or purlin to purlin. please contact the benchmark Technical Services Department for further information.
rooFlInEr
InTroDUCTIon Roofliner is a PIR insulated roof panel that is ideal for standing seam finishes. The panels are specifically designed for zinc, stainless steel, aluminium standing seam waterproofing systems and single ply membranes.
Roofliner insulated panels enhance weathertightness, thermal airtightness, fire resistance and the structural performance of a building. Suitable for buildings with a pitch, a low-pitched roof slope and flat roof as well as curved with a convex and concave radius of 20 metres when used on a frame-to-frame long spanning structure.
BEnEFITS• Quick and safe to install• Ideal for zinc, stainless steel and aluminium standing seam
systems and single ply membranes• Suitable for flat, low pitch and curved roofs• Convex and Concave radius of 20 metres can be achieved
with the 600mm wide roofliner• Available in a larger range of thicknesses• Attractive flat internal liner profile
• Lifetime insulation continuity, thermal performance and
airtightness (less than 5m3/hr/m2) certainty• Available with the Total Benchmark Guarantee• Manufactured and supplied under a quality system certified
to bS En iSO 9001: 2000• Manufacturing plants are ISO 14001 (Environmentally)
accredited
STAnDing SEAM rooFlInEr | 4342
TopSpanSTanDInG SEaM
bEnCHMARK TEChnICal
www.kingspanbenchmark.com/products/roof/standing-seam+44 (0) 800 970 9036 (UK) +353 (0) 42 969 8529 (Ireland)
For more information on this product
40mm
160mm
66mm
1000mm cover widthDimensions
TEChnICal ovErvIEW
TopSpan
available lengths
Standard lengths 1.8 up to 14 metres. Lengths over 14 metres upto 16 metres can be supplied but are subject to an additionaltransport charge.
Thermal performance
Core Thickness (mm) 66
U-Value (W/m2K) 0.25*
Weight kg/m2 21.3
* Recommended thicknesses to allow compliance with Building Regulations Approved Documents L2A & L2B (England & Wales), Technical Handbooks Domestic and Non-domestic Section 6 (Scotland), Part F2 (Northern Ireland) and Part L (Republic of Ireland - based on the Overall Heat Loss Method).
Fire
Steel inner and outer facings have a Class 1 surface spread of flame to BS476 Part 7: 1987, and are class 0 as defined by Euroclass building regulations. The panel surfaces are rated FAA/SAA to bS476: part 3:1975.
acoustics
All Topspan panels have a predicted single-figure weighted sound reduction Rw = 27dB.
Build option
The panels can be installed rafter to rafter or purlin to purlin. please contact the benchmark Technical Services Department for further information.BEnEFITS
• Suitable for frame-to-frame spanning of up to 8 metres • Rapid, single component, single-fix installation - up to
1,200m2 per day• Ideal for zinc, stainless steel and aluminium
standing seam systems and single ply membranes• Suitable for flat, low pitch and curved roofs
• Lifetime insulation continuity, thermal performance
and airtightness (less than 5m3/hr/m2) certainty• Available with the Total Benchmark Guarantee• Manufactured and supplied under a quality system
certified to BS EN ISO 9001: 2000• Manufacturing plants are ISO 14001 (Environmentally)
accredited
InTroDUCTIon Topspan is a PIR insulated roof deck combining a structural deck and a metal top sheet into one product. The panels complement zinc, stainless steel, aluminium standing seam waterproofing systems and single-ply membrane.
Topspan provides a clear span capability of up to 8 metres and is faster to install than alternative built-up roof deck systems. The internal face of the deck is pre-finished with a fresh white inner finish, providing a smooth clean interior. Topspan is suitable for flat or curved roof applications and is available with the Total Benchmark Guarantee, offering protection for thermal and structural performance.
STAnDing SEAM TopSpan | 4544
www.kingspanbenchmark.com
ens.pdf 1 25/10/2010 16:16