bendpak sku 5260579 pl-14000 production lift version d diagrams/parking lifts/bendpak-5260579... ·...

Service Manual PL-14000Service Parts & Diagrams

This guide is a troubleshooting reference used for maintaining and servicing your BendPak product. It provides comprehensive information on identifying serviceable parts and components and assists in troubleshooting problems and performing assembly/disassembly procedures.XPR-10A

BendPak SKU 5260579PL-14000 Production Lift

Version D07/19/2016

DIMENSIONS ARE IN MM

☺

2

1

3

4

5

6

7

8

9

10

ITEM NO PART NUMBER DESCRIPTION QTY REV1 5245412 PL-14000 LIFT SUPERSTRUCTURE 1 A2 5250052 PL-14000 PARTS BOX 1 A3 5502505 PULL CYLINDER ASSEMBLY Ø5.0 x 82 1 B4 5215443 PL-14000/18000 POWER UNIT COVER ASSEMBLY 1 A5 5905385 MAX CAP DANGER PL-14000 1 --6 5905105 BP LABEL 1 --7 5905370 PL-14000/18000 OPERATION LABEL 1 --8 5905375 PL-14000/18000 WARNINGS LABEL 1 --9 5905951 SERIAL NUMBER INTERIOR TAG 1 A10 5520406 ELECTRICAL BOX 10 x 10 x 6 1 --

REVISIONREV DESCRIPTION DATE EDITED BY ECO#A PRODUCTION RELEASE, DERIVED FROM 5260236 10/16/2015 JM 00705

SHEET 1 OF 2

REVDWG. NO.

ASIZE

TITLE:

NAME DATE

CHECKED

DRAWN

A

1645 LEMONWOOD DR.SANTA PAULA, CA 93060

PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF BENDPAK INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPAK INC. IS PROHIBITED.

NOTE: UNLESS OTHERWISE SPECIFIED.

JM

5260579

PL-14000 PRODUCTION LIFT VER D

10/16/2015

DO NOT SCALE DRAWING

1:60SCALE:

THIRD ANGLE PROJECTION

DB 07/13/2016

SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING1.ALL LABELS TO BE APPLIED AFTER PAINTING.2.SEE ATTACHED LABEL PLACEMENT SHEET.3.

2102

4590

4931

4797

1921

2451

38837121

250

750

457

SHEET 2 OF 2

REVDWG. NO.

ASIZE

TITLE:

A


5260579

PL-14000 PRODUCTION LIFT VER D

1:60SCALE:


☺NEXT ASSEMBLY525003552500525250053

ITEM NO

PART NUMBER DESCRIPTION QTY REV

1 5545005 M6 FLAT WASHER 6 --2 5530027 HHB M6 x 1.0 x 35 2 --3 5535357 NUT M6 x 1.0 NL 6 --4 5530093 HHB M6 x 1 x 20 4 --5 5535013 NUT M10 x 1.5 NL 11 --6 5530765 HHB M10 x 1.5 x 80 5 --7 5545350 WASHER M18 x 28 SL 24 --8 5545342 WASHER M18 FLAT 30 --9 5535202 NUT M18 x 2.5 CL 8.8 24 --10 5530319 HHB M18 x 2.5 x 50 CL 8.8 24 --11 5545177 WASHER 1-1/8" x 2" 4 --12 5535300 NUT 1-1/8-12 NN 4 --13 5530116 HHB M12 x 1.75 x 40 1 --14 5545027 WASHER M12 x Ø37 x 3mm 1 --15 5535354 NUT M12 x1.75 2 --16 5530320 BHPS M4 x 0.7 x 6 4 --17 5545341 WASHER M10 x Ø20 FLAT 9 --18 5530760 HEX HEAD BOLT M10x1.25x35 3 --19 5540003 SPRING Ø16mm x 90mm 1 A20 5505149 PL-14000 UPPER SHEAVE STACK PIN 1 A21 5505146 COTTER PIN Ø6 x 95mm 1 --22 5505150 PL-14000 SINGLE SHEAVE PIN 5 A23 5540087 PULL SPRING Ø12.7 x 51mm 8 A24 5535201 NUT M12 x 1.75 COUPLING 1 B25 5746253 PL-14000/18000 SAFETY CABLE CONNECTOR 1 B26 5530217 HHB M10 x 1.5 x 58 1 --27 5736458 PL-14000/18000 SAFETY CABLE SPACER 1 B28 5545200 WASHER M10 x Ø18 SL 4 --29 5530167 HHB M10 x 1.5 x 45mm 4 --30 5535998 NUT M10 x 1.5 4 --31 5530010 HHB M8 x 1.25 x 25 4 --32 5535001 NUT M8 x 1.25 NL 8 --33 5545202 WASHER M8 x Ø15 SL 8 --34 5545021 WASHER M8 x Ø20 FLAT 8 --35 5530011 HHB M8 x 1.25 x 35 4 --36 5535108 SOCKET SET SCREW M8x1.25x12mm L 1 --37 5535012 NUT M12x1.75 NL 16 --38 5530289 FHSS M12 x 1.75 x 70 16 --39 5716032 PL-14000/18000 RAMP GUIDE BUMPER 8 A40 5716194 PL-14000/18000 RAMP GUIDE BUMPER 8 A41 5736806 PL-14000/18000 BOTTOM RAMP BUMPER SPACER 8 B

REVISIONREV DESCRIPTION DATE EDITED BY ECO#A PRODUCTION RELEASE, DERIVED FROM 5174685 01/13/2014 TM 00639

B

ADDED (8) 5716032, REPLACED (4) 5530010 WITH 5530011, REMOVED 5745216 AND

5505715, UPDATED BOM REVISION AND NEXT ASSEMBLY, UPDATED TITLE TO REFLECT WHERE

USED

10/02/2015 JM 00705

SHEET 1 OF 2

REVDWG. NO.

ASIZE

TITLE:

NAME DATE

CHECKED

DRAWN

B




TM

5174730

PL-14000/14000XL PARTS BAG

01/13/2014


1:35SCALE:


DB 07/13/2016

SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING1.

A

B

C

D

E

F

GH

36

35

DETAIL E SCALE 1 : 12

20

2

21

3

DETAIL B SCALE 1 : 10

38

23

3739

DETAIL D SCALE 1 : 10

11

1315

14

24

16

12

DETAIL A SCALE 1 : 10

1817

4

3

1

56

10

9

8

7

22

DETAIL G SCALE 1 : 6

29

28

30

32

34

33

31

DETAIL F SCALE 1 : 8

26

27

25 DETAIL C SCALE 1 : 8

19

DETAIL H SCALE 1 : 6

4140

SHEET 2 OF 2

REVDWG. NO.

ASIZE

TITLE:

B


5174730

PL-14000/14000XL PARTS BAG

1:40SCALE:


☺

A

4

2

1

9

3


7

6

5

8

REVISIONREV DESCRIPTION DATE EDITED BY ECO#A PRODUCTION RELEASE, DERIVED FROM 5175465 01/14/2014 TM 00639B UPDATED BOM REVISIONS 10/07/2015 JM 00705

ITEM NO PART NUMBER DESCRIPTION QTY REV1 5600825 PL-14000 CLOSE OUT BACK POST WELDMENT 1 B2 5600826 PL-14000 CLOSE OUT FRONT POST WELDMENT 1 B3 5600579 PL-14000/18000 LONG CROSS TUBE WELDMENT 1 B4 5721377 PL-14000/18000 SIDE ANGLE 2 C5 5545342 WASHER M18 FLAT 10 --6 5545350 WASHER M18 x 28 SL 8 --7 5535202 NUT M18 x 2.5 CL 8.8 8 --8 5530319 HHB M18 x 2.5 x 50 CL 8.8 8 --9 5530308 AB 3/4" x 7" 8 --

FOR USE WITH5260236 SHEET 1 OF 1

REVDWG. NO.

ASIZE

TITLE:

NAME DATE

CHECKED

DRAWN

B




TM

5175520

PL-14000 CLOSEOUT LEG SUPERSTRUCTURE

VER C

01/14/2014


1:50SCALE:


DB 07/12/2016



☺

21

REVISIONREV DESCRIPTION DATE EDITED BY ECO#A

A-001A-002A-003A-004A-005A-006

PRODUCTION RELEASEUPDATED NEXT ASSEMBLYUPDATED NEXT ASSEMBLYUPDATED NEXT ASSEMBLYUPDATED NEXT ASSEMBLY

UPDATED NEXT ASSEMBLIESUPDATED NEXT ASSEMBLIES

11/17/201008/02/201105/09/201202/27/201310/22/201301/22/201410/08/2015

TMTMTMTMDBTMJM

0041500474005040058400631

00639 PREA00705

NEXT ASSEMBLY525003552500525250053

ITEM NO PART NUMBER DESCRIPTION QTY REV1 5575096 PL-14000 CROSS TUBE SHEAVE 1 A2 5565110 6309 DOUBLE SHIELDED BALL BEARING 1 -

SHEET 1 OF 1

REVDWG. NO.

ASIZE

TITLE:

NAME DATE

CHECKED

DRAWN

A




TM

5215503

PL-14000 CROSSTUBE SHEAVE ASSEMBLY

11/17/2010


1:2SCALE:


DB 07/08/2016

ASSEMBLE ITEMS AS SHOWN1.


☺

9

3

10

12

4

11

6

5

2

1

14

7

8

13

REVISIONREV DESCRIPTION DATE EDITED BY ECO#A PRODUCTION RELEASE, DERIVDED FROM 5215505 01/13/2014 TM 00639B UPDATED BOM REVISIONS AND NEXT ASSEMBLIES 10/13/2015 JM 00705

NEXT ASSEMBLY524541052454115245412

ITEM NO PART NUMBER DESCRIPTION QTY REV1 5600816 PL-14000 PULLBOX WELDMENT 1 A2 5600818 PL-14000 SAFETY WELDMENT 1 B3 5716197 PL-18000 PULLBOX SLIDE BLOCK 4 A4 5731231 PL-14000/18000 SAFETY PIN TOGGLE PLATE 1 B5 5505059 PL-14000 SAFETY PIN 1 B6 5746398 DOUBLE THREADED ROD M10 x 1.5 x 120 1 A7 5535013 NUT M10 x 1.5 NL 3 -8 5505147 PL-14000 PULLBOX CLEVIS PIN 1 A9 5505146 COTTER PIN Ø6 x 95mm 1 -10 5530032 SHCS M6 x 1 x 10 2 -11 5540003 SPRING Ø16mm x 90mm 1 A12 5586103 CAM FOLLOWER Ø19 x M10 x 8 1 C13 5505057 COTTER PIN Ø6.3 x 120mm 1 -14 5505058 PL-14000 PULLBOX CLEVIS PIN 1 A

SHEET 1 OF 1

REVDWG. NO.

ASIZE

TITLE:

NAME DATE

CHECKED

DRAWN

B




TM

5215642

PL-14000 PULLBOX ASSEMBLY

01/13/2014


1:6SCALE:


DB 07/08/2016

ASSEMBLE ITEMS AS SHOWN1.


☺

3

1

4

2

ISOMETRIC VIEWFOR REFERENCE ONLY

DO NOT SCALE


A-001PRODUCTION RELEASE, DERIVED FROM 5215504

UPDATED NEXT ASSEMBLIES01/13/201410/26/2015

TMTM

0063900705

NEXT ASSEMBLY52454115245412

ITEM NO PART NUMBER DESCRIPTION QTY REV1 5600813 PL-14000/18000 LIFTING ROD TUBE WELDMENT 1 A2 5746662 PL-14000/18000 TOP LIFT COLLAR 2 A3 5600234 PL-14000 CABLE RETAINER WELDMENT 1 A4 5620700 PL-14000 INNER LIFT ROD WELDMENT 1 A

SHEET 1 OF 2

REVDWG. NO.

ASIZE

TITLE:

NAME DATE

CHECKED

DRAWN

A




TM

5215645

PL-14000 RAMP LIFTING ROD ASSEMBLY

01/13/2014


1:16SCALE:


DB 07/08/2016

SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING1.ASSEMBLE ITEMS AS SHOWN2.


☺

A

10

12

1

6

3

11

2

9

8

135


4

16

1415


ITEM NO


1 5601059 PL-14000/14000XL POWER POST WELDMENT 1 A2 5600823 PL-14000 FRONT CONTROL POST WELDMENT 1 B3 5215642 PL-14000 PULLBOX ASSEMBLY 1 B4 5600814 PL-14000/18000 CABLE BREAK SAFETY LATCH BAR

WELDMENT 4 A5 5215645 PL-14000 RAMP LIFTING ROD ASSEMBLY 4 A6 5600815 PL-14000/18000 BOTTOM RAMP WELDMENT 1 B7 5620702 PL-14000 TOP RAMP WELDMENT 1 B8 5600579 PL-14000/18000 LONG CROSS TUBE WELDMENT 1 B9 5600855 PL-14000/18000 CROSS TUBE WELDMENT, SHORT FRONT 1 A

10 5600854 PL-14000/18000 CROSS TUBE WELDMENT, SHORT REAR 1 A11 5721376 PL-14000/18000 FRONT ANGLE 2 C12 5721375 PL-14000/18000 REAR ANGLE 2 C13 5721377 PL-14000/18000 SIDE ANGLE 2 C14 5746667 PL-14000/18000 CABLE BREAK SAFETY CLEVIS PIN 8 A15 5540300 RETAINING RING, TRUARC 5100-75 8 --16 5530099 SSS M6 x 1.0 x 12 8 --


SHEET 1 OF 1

REVDWG. NO.

ASIZE

TITLE:

NAME DATE

CHECKED

DRAWN

A




JM

5245412

PL-14000 LIFT SUPERSTRUCTURE

10/16/2015


1:60SCALE:


DB 07/12/2016



☺

A

B

1

1615

8

9

1110

12

2

18

17

1913

14

20

22

24

21 23


457

6

DETAIL B SCALE 1 : 4

3


ITEM NO


1 5174730 PL-14000/14000XL PARTS BAG 1 B2 5736398 PL-14000/18000 CONTROL PLATE 1 C3 5600580 PL-14000/18000 POST LINKAGE WELDMENT 3 C4 5701360 PL-14000/18000 SAFETY SHEAVE BRACKET 2 C5 5746223 PL-14000/18000 SAFETY CABLE SHEAVE 2 C6 5215503 PL-14000 CROSSTUBE SHEAVE ASSEMBLY 12 A7 5735340 PL-14000/18000 SHEAVE BEARING SPACER 14 B8 5595163 PL-14000/14000XL CABLE ASSEMBLY Ø12 x 8416mm 1 A9 5595164 PL-14000/14000XL CABLE ASSEMBLY Ø12 x 11227mm 1 A10 5595166 PL-14000 CABLE ASSEMBLY Ø12 x 12485mm 1 A11 5595167 PL-14000 CABLE ASSEMBLY Ø12 x 14965mm 1 A12 5595411 PL-14000 Ø6 x 11671mm SAFETY CABLE DT 1 B13 5540111 SPRING Ø25mm x 178mm 16 A14 5530308 AB 3/4" x 7" 8 -15 5736397 PL-14000/18000 SAFETY HANDLE 1 C16 5736419 PL-14000 POST SAFETY BAR 1 C17 5535012 NUT M12x1.75 NL 1 -18 5545027 WASHER M12 x Ø37 x 3mm 1 -19 5735767 HD-35 SERIES HD POWER UNIT ADAPTER PLATE 1 A20 5505615 14" CABLE TIES 7 -21 5900147 SAFETY MANUAL ALI / SM 93-1 1 -22 5900152 ALIGN OIM OPERATION INSPECTION & MAINTENANCE 1 -23 5905151 SAFETY TIPS CARD ALI-ST 90 1 -24 5900223 PL-14000/18000 INSTALLATION MANUAL 1 -


SHEET 1 OF 1

REVDWG. NO.

ASIZE

TITLE:

NAME DATE

CHECKED

DRAWN

A




JM

5250052

PL-14000 PARTS BOX

10/16/2015


1:35SCALE:


DB 07/12/2016


3

11 6

135

1

12

9

4

10

2

8

7


DO NOT SCALE



UPDATED NEXT ASSEMBLY03/17/201411/02/2015

TMTM

0063900705


ITEM NO


1 5736808 PL-14000 CLOSE OUT BACK POST SHEAVE BOX BOTTOM PLATE 1 A

2 5736789 PL-14000 REAR SHEAVE BOX MID PLATE 1 A3 5736787 PL-14000 BACK POST SHEAVE BOX TOP PLATE 1 A4 5735343 PL-14000 LATERAL SHEAVE PLATE 1 C5 5736784 PL-18000 CLOSE OUT BACK POST MID PLATE SPACER 2 A6 5736802 PL-14000 POWER POST REAR SHEAVE MOUNT BENT

PLATE 1 A7 5736801 PL-14000 POWER POST SHEAVE MOUNT BENT PLATE 1 A8 5746219 PL-14000/18000 LOCKING SHEAVE PIN COLLAR 1 B9 5746221 PL-14000/18000 SHEAVE PIN COLLAR 1 B10 5736559 PL-14000/18000 SHEAVE BOX SUPPORT GUSSET #1 2 A11 5736405 PL-14000/18000 SMALL LOWER POWER POST SHEAVE

SUPPORT PLATE 2 B

12 5736406 PL-14000/18000 LARGE LOWER POWER POST SHEAVE SUPPORT PLATE 2 B

13 5736407 PL-14000/18000 POWER POST REAR SHEAVE MOUNT SUPPORT GUSSET 2 B

SHEET 1 OF 4

REVDWG. NO.

ASIZE

TITLE:

NAME DATE

CHECKED

DRAWN

A




TM

5620715

PL-14000 CLOSE OUT BACK POST TOP

SHEAVE BOX

03/17/2014


1:15SCALE:


DB 07/07/2016

BREAK AND DEBURR ALL SHARP EDGES 0.3mm1.REMOVE ALL WELD SPLATTER2.

DIMENSIONS ARE IN MMTOLERANCES:

0. = ±1.5 0.0 = ±0.5

ANGULAR: 0. = 2°

SURFACE FINISH 1.6 ISO Ra µm FOR MACHINED SURFACES UNLESS OTHERWISE SPECIFIED

3

8

8

7

64

8

1

2

9

5




TMTM

0063900705


ITEM NO


1 5736796 PL-14000 CLOSE OUT FRONT POST SHEAVE BOX BOTTOM PLATE 1 A

2 5736794 PL-14000 CLOSE OUT FRONT POST SHEAVE BOX MID PLATE 1 A3 5736790 PL-14000 CLOSE OUT FRONT POST SHEAVE BOX TOP PLATE 1 A4 5735343 PL-14000 LATERAL SHEAVE PLATE 2 C5 5746219 PL-14000/18000 LOCKING SHEAVE PIN COLLAR 1 B6 5746221 PL-14000/18000 SHEAVE PIN COLLAR 1 B7 5736559 PL-14000/18000 SHEAVE BOX SUPPORT GUSSET #1 2 A8 5736396 PL-14000/18000 SHEAVE BOX SUPPORT GUSSET #5 4 B9 5725168 PL-14000/18000 FRONT POST CLOSEOUT CHANNEL 1 C

SHEET 1 OF 3

REVDWG. NO.

ASIZE

TITLE:

NAME DATE

CHECKED

DRAWN

A




TM

5620717

PL-14000 CLOSE OUT FRONT POST SHEAVE BOX

03/14/2014


1:12SCALE:


DB 07/07/2016

BREAK AND DEBURR ALL SHARP EDGES 0.3mm1.REMOVE ALL WELD SPLATTER2.DIMENSIONIS SHOWN ARE AFTER PAINTING3.


0. = ±1.5 0.0 = ±0.5

ANGULAR: 0. = 2°


3

11

8

712

13

10

4

95

15

1 2

14

6




TMJM

0063900705


ITEM NO


1 5736797 PL-14000 FRONT POST SHEAVE BOX BOTTOM PLATE 1 A2 5736795 PL-14000 FRONT POST SHEAVE BOX MID PLATE 1 A3 5736793 PL-14000/18000 FRONT POST SHEAVE BOX TOP PLATE 1 A4 5736418 PL-14000/18000 NOTCHED MID PLATE SPACER 1 B5 5735343 PL-14000 LATERAL SHEAVE PLATE 3 C

6 5735336 PL-14000/18000 FRONT POST LATERAL SHEAVE PLATE SPACER 1 B

7 5735341 PL-14000 FRONT POST SHEAVE BEARING 2 A8 5746219 PL-14000/18000 LOCKING SHEAVE PIN COLLAR 3 B9 5746221 PL-14000/18000 SHEAVE PIN COLLAR 2 B

10 5736395 PL-14000/18000 SHEAVE BOX SUPPORT GUSSET #4 2 B11 5736413 PL-14000/18000 LATERAL SHEAVE PLATE 1 B12 5736394 PL-14000/18000 SHEAVE BOX SUPPORT GUSSET #3 1 B13 5736393 PL-14000/18000 SHEAVE BOX SUPPORT GUSSET #2 1 B14 5725168 PL-14000/18000 FRONT POST CLOSEOUT CHANNEL 1 C15 5736396 PL-14000/18000 SHEAVE BOX SUPPORT GUSSET #5 2 B

SHEET 1 OF 3

REVDWG. NO.

ASIZE

TITLE:

NAME DATE

CHECKED

DRAWN

A




TM

5620718

PL-14000 FRONT POST SHEAVE BOX

02/21/213


1:12SCALE:


DB 07/07/2016



0. = ±1.5 0.0 = ±0.5

ANGULAR: 0. = 2°


1

3

4

2


DO NOT SCALE

REVISIONREV DESCRIPTION DATE EDITED BY ECO#A PRODUCTION RELEASE, DERIVED FROM 5620546 03/14/2014 TM 00639B REPLACED 5770215 WITH 5770131 10/13/2015 JM 00705


ITEM NO. PART NUMBER DESCRIPTION QTY. REV1 5770131 PL-14000 POST I-BEAM 1 A2 5736389 PL-14000 BASE PLATE 1 C3 5620547 PL-14000/18000 REAR POST SHORT ANGLE

MOUNT WELDMENT 1 A4 5736408 PL-14000/18000 ANGLE MOUNT PLATE 1 B

SHEET 1 OF 2

REVDWG. NO.

ASIZE

TITLE:

NAME DATE

CHECKED

DRAWN

B




TM

5620720

PL-14000 CLOSE OUT BACK POST SUBWELDMENT

03/14/2014


1:40SCALE:


DB 07/07/2016



0. = ±1.5 0.0 = ±0.5

ANGULAR: 0. = 2°


45732 TYP

81 TYP

512 PL

254 PL

1522 PL

1522 PL

R10

102

178

3 MINFOR FLAME CUT

16

457


DO NOT SCALE

REVISIONREV DESCRIPTION DATE EDITED BY ECO#A PRODUCTION RELEASE 10/19/2010 TM 00415B

B-001

REMOVED 4 HOLES, WAS Ø25 8PL NOW 4PL, WAS 306 NOW 457, WAS 25TYP NOW 32TYP, WAS 25TYP NOW 100.5TYP, WAS 101.5 NOW 178, UPDATED TOLERANCES, UPDATED NEXT

ASSEMBLYUPDATED NEXT ASSEMBLIES

11/08/2011

02/26/2013

TM

TM

00474

00584C

C-001C-002

WAS 101 NOW 81UPDATED NEXT ASSEMBLIESUPDATED NEXT ASSEMBLIES

08/27/201301/21/201409/30/2015

TMTMJM

006140063900705

NEXT ASSEMBLY56205445620545562054656205515620703562072056203345620336562033756203385620339 SHEET 1 OF 1

REVDWG. NO.

ASIZE

TITLE:

NAME DATE

CHECKED

DRAWN

C




TM

DIMENSIONS ARE IN MMTOLERANCES: MACHINE TO

0 = ±1.5 0.0 = ±0.5 0.00 = ±0.13

ANGULAR: MACHINE TO 0. = ±½°

SURFACE FINISH 1.6 Ra µm FOR MACHINED SURFACES UNLESS OTHERWISE SPECIFIED 5736389

PL-14000 BASE PLATE


1:5SCALE:


DB 07/06/2016

BREAK AND DEBURR ALL SHARP EDGES 0.3mm1.MATERIAL: HR ASTM A36 OR Q235 GB/T 7002.

10/19/2010

PART SPECIFICATION FORM

BENDPAK Number: 5900147

MRP Description: SAFETY MANUAL ALI / SM 93-1

Date: 12/28/2010

ECO : 00431

1. Engineering Specification

Application: ALI SAFETY MANUAL Detailed Description:

Approved Vendor Vendor Part # Contact # Preferred Vendor

1)

2. Vendor Information



MRP Description: ALIGN OIM OPERATION INSPECTION & MAINTENANCE

Date: 12/28/2010

ECO : 00431


Application: ALI OPERATION INSPECTION & MAINTENANCE MANUAL Detailed Description:

f


1)




MRP Description: BP LONG

Date: 10/24/2014

ECO : 00663


Application: BENDPAK LABEL Detailed Description:

SIZE: 33.75” L x 4” W (857mm x 100mm)

Material: Yellow Represents Clear Adhesive PET ( DOES NOT PRINT YELLOW)

Size: 4”W x 30”H

Thickness: 2 Mil

Finish: Polished

Ink: U.V. protected, Opaque White

Print Process: Silk Screen, 85 line-screen (Opaque White ink, clear adhesive PET will fill in blank areas.)

Lamination: Clear-gloss over-laminate for abrasion, chemical, and ultra violet protection


1)




MRP Description: SAFETY TIPS CARD ALI-ST 90

Date: 12/28/2010

ECO : 00431


Application: ALI SAFETY TIPS Detailed Description:


1)




MRP Description: PL-14000/18000 OPERATION LABEL

Date: 08/28/2013

ECO : 00614


Application: PL-14/18 SAFETY/OPERATION LABEL Detailed Description:

SIZE: 24” L x 6” W (607mm x 152mm)


1)




MRP Description: PL-14000/18000 WARNINGS LABEL

Date: 08/28/2013

ECO : 00614


Application: PL-14/18 WARNING LABEL Detailed Description:

SIZE: 27” L x 6” W (686mm x 152mm)


1)




MRP Description: MAX CAP DANGER PL-14000

Date: 08/29/2013

ECO : 00614


Application: LIFT CAPACITY STICKER Detailed Description:

SIZE: 4.75” L x 4” W (120.6mm x 101.6mm)


1)




MRP Description: SERIAL NUMBER INTERIOR TAG. LABEL B

Date: 11/12/2015

ECO : 00734


Application: DATA SERIAL TAG Detailed Description:

SIZE: 3.38” L x 3.38” W (85.4mm x 85.4mm)

2. Vendor Information (Or for Reference)


1)

2)

OR BENDPAK ENGINEERING APPROVED EQUIVALENT

Santa Paula, CA USAwww.bendpak.com

Model NuMber

lift CapaCity

Serial NuMber

deSCriptioN

Voltage

DANGER!Disconnect Power Before Servicing

WArrAnty voiD if DAtA PlAte iS removeD PN 5905951

110-240VAC, 50-60 Hz, 1 Ph 380-415VAC, 50-60 Hz, 3 Ph208-240VAC, 50-60 Hz, 1 Ph 208-440VAC, 50-60 Hz, 3 Ph

date of Mfg.

PL 14000 Packaging Report

December 16, 2011

The power side and one offside will go together.

Parts box.

The two top will get one small shipping angle at the bottom to protect paint.

This is the small shipping angle. See hand

drawings for detail.

Everything will be strapped to the lift with proper cardboard.

Small 90* linkage bars will go inside of the post.

Larger Linkage Bars will be place on top and

in between the posts.

The second two off side posts will be stacked on top of each other as shown.

Full cardboard and plastic.

Two bolts will hold together the top of the posts that are stacked.

Ramps will be set together back‐to‐back. You can strap together three ramps maximum for each package.

Bolt them together at all four corners as shown.

Make a small shipping angles as shown for the bottom of the stack.

Make a circular cage with some tubing. Weld two open tubes to both sides. This will allow the forks of a

forklift to drive in and lift the ramps in and out of the container.

Full complete cardboard and plastic.

Completely assemble the power side post with cylinder. Insert all sheaves and pins in the cylinder cable box.

Make sure the sheaves and entire safety mechanism is assembled.

Remaining sheaves will be placed in the opening at the top of the power post.

bendpak sku 5260579 pl-14000 production lift version d diagrams/parking lifts/bendpak-5260579... ·...

Documents