bentley sample catalog

8/9/2019 Bentley Sample Catalog

1/30

Global OnDemand E-Learning LibrarySample Course Descriptions

http://becareers.org

July 2008
http://becareers.org/


2/30


3/30

Welcome

This catalog has been specially prepared to provide you with a glimpse into the wealth of online coursesmade available to all BE Careers Network Academic subscribers. All told, there are over 700 suchcourses on the Bentley LEARN Server , Bentleys learning management system which covers a widespectrum of products and design disciplines. Although the vast majority of the courses listed here areintroductory in nature, there are several examples of more advanced topics such as the MicroStation for

Advanced Users V8 XM Edition . This collection or abbreviated Course Catalog is designed to whet your appetite to what is possible on the Bentley LEARN Server so take a few minutes to explore theenvironment. The Course Catalog contains selected courses that are most frequently accessed and wefeel most appropriate to give students the necessary skills to succeed.

Accessing the contents of this catalogWhat you see here are the descriptions of the courses as presented in the Bentley LEARN Server. Youcan find each of these courses on your own by using the Bentley LEARN Servers Advanced Search wehave made it easier to get to when viewing it in Adobe Acrobat Reader. When you find a course you are

interested in signing up forprovided you are a member of the Academic Subscription program, simplyclick on the name of the course in the catalog. This provides a hyperlink to the course itself which youcan then login to register.

Once you have signed up you can start taking the course by clicking the Course Offerings link on the leftside of the page, click on the Currently Registered Training button and click Launch to launch theselected course. You can stop and restart any of the online courses at your convenience. The BentleyLEARN Server always remembers where you left off and provides to you the ability to pick up where youleft off. Keep in mind there is no time limit on this and that you control the order in which you take thevarious chapters found in most of the courses.

So, give this catalog a good read. You will, no doubt, find something of interest. In the case you cantfind what you are looking for, you can always browse the entire collection of catalogs presented on the

Course Offerings page or use the Advanced Search to focus in on your specific interest.

And remember, if you have any questions; dont hesitate to contact us at [email protected]

Regards.

The entire BE Careers Network team

About the BE Careers Network BE Careers Network brings software-supported infrastructure curricula into academic institutions throughtailored programs and partnerships, to help produce career-ready engineers and architects.We support educators and students through software, blended learning techniques, and more. Together with academic institutions and industry professionals, Bentley cultivates the skills necessary for career-ready AEC professionals--for Academic programs encompassing Architecture, Geospatial, Plant design,and Civil, Structural and Hydraulic Engineering. By supporting schools, BE Careers helps sustain theAEC industry with knowledgeable students and graduates.
mailto:[email protected]://lms.bentley.com/globalelearning/DesktopDefault.aspx?tabindex=4&tabid=255http://lms.bentley.com/globalelearning/DesktopDefault.aspx?tabindex=1&tabid=226http://lms.bentley.com/globalelearning/DesktopDefault.aspx?tabindex=4&tabid=255http://lms.bentley.com/globalelearning/DesktopDefault.aspx


4/30


5/30

BE Careers Network Global E-Learning Library

For more information email [email protected], 2008 Bentley Systems, Incorporated

1

MicroStation Essentials V8 XM Edition

OnDemand eLearning: Hands-on Hours: 32

At the end of the course students will be able to: create and edit 2D designs using established design standards in a production environment have a solid understanding of MicroStation

Course Overview Welcome to MicroStation Working with Views Drafting with MicroStation AccuDraw, AccuDraw, AccuDraw Element Creation Tools

Additional Element Attributes

The Level System Working with Existing Elements Modifying Existing Elements Annotating Designs Organizing Design Data Organizing Project Data Creating Printed Output

Course Prerequisites: None

Products Covered: MicroStation

This course is designed for the new MicroStation user and builds a solid foundation in the concepts,tools and features found in the MicroStation drawing environment. In this hands-on course, studentsare already using MicroStation by page four of the course guide. Starting with setting up a drawingand concluding with plotting, students walk through a typical workflow using the tools and features of the latest version of MicroStation. Interspersed throughout are real-world design problems solvedusing the concepts learned to that point in the course. Various engineering disciplines are representedin the form of hands-on exercises. This offering is taught using MicroStation V8 XM Edition.

This course uses the MicroStation Examples files as the course data set. These files are available:When you install MicroStation

Description

Objectives

Details

Topics
http://lms.bentley.com/globalelearning/DesktopModules/OfferingInfo.aspx?cid=3973&catid=83&offid=19970&tabindex=4&tabid=255


6/30



2

MicroStation V8 XM Edition for CAD Users


After this course students will be able to: apply MicroStation to the design process for creation, editing, referencing and plotting recognize issues surrounding translation files to and from MicroStation

Welcome to MicroStation Working with Views Designing with MicroStation AccuDraw Element Creation Additional Attributes Levels Working with Existing Elements Modifying Elements Annotating Drawings Organizing Design Data Organizing Project Data Printing Overview

The Print Dialog Box Design Problem



This course is designed for experienced CAD users who want to transition existing CAD knowledge toMicroStation skills. To ease the transition to MicroStation, parallel references are continually given,showing how MicroStation handles operations familiar to the CAD user. Subjects covered range fromthe initial setup of a new design file, to incorporating existing data from non-MicroStation CADproducts. Plotting and other output considerations are covered, including PDF creation.

This course uses the MicroStation Examples files as the course data set. These files are available:When you install MicroStation

Description

Objectives

Details

Topics


7/30



3

MicroStation V8 XM Edition AccuDraw Basics


After this course students will be able to:

apply the tools and techniques of AccuDraw to increase quality and speed of drafting andmodeling

AccuDraw Basics AccuDraw Shortcuts Applying AccuDraw AccuDraw in 3D



Students will learn that AccuDraw is indispensable to MicroStation. Students will discover how to usethis essential and powerful tool to increase drawing and modeling accuracy as well as speed. Thecourse covers 2D and 3D.

Description

Objectives

Details

Topics


8/30



4

MicroStation V8 XM Edition Everything 3D - Part 1

OnDemand eLearning: Lecture Hours: 4

In this class we will learn: manage and control 3D views use AccuDraw in 3D apply curve tools to design problems use Solid Modeling tools and techniques

3D Basics 3D View Control AccuDraw Basic 3D tools Solid Modeling Conceptual Modeling

Course Prerequisites: MicroStation Essentials


Through a series of hands-on exercises, users will develop a solid understanding of the 3Dcapabilities of MicroStation. Users will navigate and work in a 3D design file, create and edit 3Dgeometry in MicroStation, create parametric 3D models and develop a basic knowledge of therendering capabilities of MicroStation.

Description

Objectives

Details

Topics


9/30



5



In this class we will learn: apply curve tools to design problems use Surface Modeling tools and techniques create 2D sheets and export 3D data

Meshes Surface Creation and Modification Cells and Utilities




Description

Objectives

Details

Topics


10/30



6



In this class we will learn: use AccuDraw in 3D use Feature Modeling tools and techniques use dimension driven designs create 2D sheets and export 3D data

Feature Modeling Advanced Feature Modeling Drawing Composition




Description

Objectives

Details

Topics


11/30



7

MicroStation for Advanced Users V8 XM Edition


After this course advanced users will be able to: improve drafting and designing productivity using MicroStation apply advanced productivity tools, features and techniques

AccuDraw Position and Rotation AccuDraw Settings The Pop-up Calculator 3D AccuDraw Basics Element Types in more detail Point elements Curves Cells Annotation Detailing Symbols Annotation Scale XYZ Text Tools Word Processor Text Editor

Dimension Styles

Tags Tag Tools Creating Tag Sets Attaching Tags Reviewing Tag Data View Attributes Selecting Tags by Attributes Tag Reports Tag Set Libraries Custom Line Styles Custom Line Style Components Using Custom Line Styles Creating Custom Line Styles Manage Line Style Definitions Modifying Line Style Attributes

Productivity Drafting Tools Select By Attributes PowerSelector IntelliTrim Move to Contact Advanced use of Manipulate and Modification tools Links Generate Web Pages w/ HTML Author Engineering Links HTML Statements to Control USTN Project Explorer Google Earth

Basics Links and control Animation 3D Warehouse Save to SKP Using Collada files Data Management Data Cleanup Dialog Box Standards Checker Design History Multi Scale Details Methods Method 1 Method 2

Customization Tools

DGNLIB setup Simple Customizations Element Templates Tasks Import USTN.M01 files Workspaces Groups Graphic Groups Named Groups Printing The Print Dialog Box Setting print preferences Configuration Variables Drivers Options for output

Pen Tables Batch Print Steps For Using Batch Print Configuring Batch Prints Specifications Processing a Job Troubleshooting File Protection What is File Protection? Rights as Defined in MicroStation Opening Password Protected DGN Files Raster File

Course Prerequisites: MicroStation V8 XM Essentials

Products Covered: MicroStation V8 XMThis course is intended for the experienced MicroStation user and focuses on the features of MicroStation designed to improve user and work-group productivity. Providing lecture, demonstrationand hands-on exercises, MicroStation V8 XM for Advanced Users begins with a thorough examinationof AccuDraw and ends with an introduction to importing and exporting CAD data from/to other CADprograms.

Description

Objectives

Details

Topics


12/30



8

MicroStation V8 XM Edition for CAD Managers


After this course users attending will be able to:

create an efficient and intuitive operating environment for all members of the design team or larger organization

provide integrated company standards deployable across the entire corporate organization maintain strict segregation between the custom environment developed on site and the core

Bentley delivered software resources

PART 1: Installations and Design File Components Installation of MicroStation and

SELECTserver The Design Library File Working with Levels Text and Dimension Styles Working with Cells Creating the Corporate Standards DGNLIB

File Developing Project Standards through Seed

Files Customizing the MicroStation Line Styles Using Element Templates for Standards

ManagementPART 2:

Workspaces and Plotting Exploring the MicroStation Workspaces Best Practices Defining an organization-wide Workspace Customizing the Graphic User Interface Structured Workflows

Managing MicroStation Plotting BatchPlot

PART 3: Applications and Useful Utilities VBA and MDL Integrating Applications into the

Workspace The Art of Remapping and Batch

Processing Archival Operations using Packager

PART 4: Powerful Project Environment

Enhancements Design History File Protection Digital Signatures and Digital Rights Internet Related Operations Trouble Shooting the Work Environment Trouble Shooting MicroStation Design File

Course Prerequisite: MicroStation V8 XM Administrator UpdateUsers attending must be experienced MicroStation Users

Products Covered: MicroStation V8 XM Edition

MicroStation V8 XM for CAD Managers is a comprehensive course for managers of multi-user MicroStation-based (or hybrid) CAD installations. This course examines in detail the tools andprocedures that allow complete control over the installation, appearance and operation of MicroStation. Running throughout the course is the development of a best practice CAD workenvironment constructed step-by-step as each topic is discussed. In addition, users attending willreceive advice on how to manage their environment, as well as their users and customers, in order tomaximize productivity, achieve targets and develop team member abilities.

Description

Objectives

Details

Topics


13/30



9

GenerativeComponents V8 XM Edition Essentials


Upon completion of the course users will be able to: install and set up GenerativeComponents use GenerativeComponents tools to create geometry apply principles of Transactional and Programmatic design import and Export with Excel and databases use principles of scripting to design integrate GenerativeComponents design with their CAD workflow

Installation and Setup General Principles GenerativeComponents Basics Defining Variables, Sets and Coordinate

Systems Operations, Collections and Replication

Parallel Representations

Additional Feature Types Script based design Export and Import Using GenerativeComponents in a workflow Design Problems

Course Prerequisites: Users taking this course will need fluency in 3D modeling including the use of B-spline Curve and Surface geometry, as well as experience in developing application logic, for example, in the use of spreadsheets.

Products Covered: GenerativeComponents

In this course users will learn that GenerativeComponents is an advanced parametric and associativedesign system which gives designers and engineers new ways to efficiently explore alternative forms.Once the underlying logic and design relationships have been defined, the designer can create newoptions without manually drawing (or re-drawing) the detail design model for each possible scenario.This course will show how GenerativeComponents allows designers to work completely graphically, or to combine this with scripting and programming where appropriate. The integration of algorithmicdesign with conventional interaction, based on direct manipulation, allows GenerativeComponents tofully support alternative approaches to design that span the intellectual and creative spectrum.The Essentials course will take students through the principles of design with GenerativeComponents.Students will become familiar with installation, general interface principles, basic geometric

generation, basic scripting and importing/exporting data.

Description

Objectives

Details

Topics


14/30



10

Bentley Architecture Fundamentals XM Edition


After completion of this course students will be able to: create a 3D model from sketches, scans and other design criteria construct the model and extract from it prepare space schedules, reporting on room sizes, finishes, occupancy draw plans with sections and elevations prepare schedules of all parts within the model, such as doors, windows, bills of quantities assess the model in its real environment and present camera views of that model

Core Concepts Space Planning Design Development Reports and Schedules Printing

Course Prerequisites: Knowledge of Microsoft Windows.Knowledge and understanding of the principles of three dimensional design.Modelling using MicroStation XM Edition.

Products Covered: Bentley Architecture V8 XM Edition

Using Bentley Architecture V8 XM Edition and its example files throughout the course, students will beable to do real-time, intelligent 3D model creation; review and edit the model; annotate as well asextract drawings, reports and schedules from the model.

Description

Objectives

Details

Topics


15/30



11

Bentley Architecture Fundamentals XM Edition Metric


After this course students will be able to: create a 3D model from sketches, scans and other design criteria construct the model and extract from it create space schedules reporting on room sizes, finishes occupancy, plans, sections,

elevations, schedules of all parts within the model (such as doors, windows, bills of quantities) assess the model in it's real environment and present camera views of that model

Core Concepts Space Planning Design Development Reports and Schedules Printing

Course Prerequisites: Knowledge of Microsoft WindowsKnowledge and understanding of the principles of three dimensional designModelling using MicroStation XM Edition

Products Covered: Bentley Architecture

Using Bentley Architecture XM Edition and its example files throughout the course, you will be able todo real-time, intelligent 3D model creation, review and edit the model, annotate, extract drawings,reports and schedules from the model.

Description

Objectives

Details

Topics


16/30



12

Introduction to Bentley Building Mechanical Systems


After this course users will be able to: place ductwork and diffusers place fittings and grilles manipulate and modify mechanical elements use tools to manage and verify the parts and families that are used to create the model extract drawings, reports and schedules form the model customize the dataset to comply to company standards or project-specific standards

Placing ductwork and diffusers Placing fittings and grilles Manipulating and modifying mechanical

elements Using tools to manage and verify the parts

and families that are used to create themodel

Extracting drawings, reports and schedulesfrom the model

Customizing the dataset to comply tocompany standards or project-specificstandards

Course Prerequisites: A fundamental knowledge of MicroStation is needed. An understanding of mechanical design is required

Products Covered: Bentley Building Mechanical Systems

Introduction to Bentley Building Mechanical Systems provides an excellent start to becoming highlyproductive in this industry-leading solution for Mechanical and Plumbing disciplines. In this 8 hour course, any professional will go through the critical elements to become more productive and extendtheir capabilities.

Description

Objectives

Details

Topics


17/30



13

Integrated Structural Design from Bentley/RAM/ STAAD


After this course students will be able to: open and modify an RSS model import a floor in the model to RAM Concept import the whole model into RAM Advanse and Connection import the model into Bentley Structural

Opening and modifying an RSS model Importing a floor in the model to RAM

Concept Importing the whole model into RAM

Advanse and Connection Importing the model into Bentley Structural

Course Prerequisites: An understanding of stuctural design is an advantageAn understanding of CAD modelling is needed

Products Covered: Bentley Structural STAAD RAM Structural Systems RAM Concept RAM AdvanseRAM Connection

This class demonstrates seamlessly sharing information between the structural engineering designapplications RAM Structural System, RAM Concept, RAM Advanse and RAM Connection, which is atwo-way data link between RAM Structural System and Bentley Structural.

Description

Objectives

Details

Topics


18/30



14

Modeling Offshore Structures and Bridges using STAAD


Expertise in the application of STAAD to foundation design.Improved analysis of your STAAD work through better understanding of errors and warnings.

Creating the wave model Defining wave parameters View loadings in STAAD.Pro and analysis Creating the transportation model Defining the transportation parameters Creating a bridge deck and influence surface

Creating a roadway and lane requirements

Course Prerequisites: An understanding of structural design concepts.

Products Covered: STAAD.Pro 2006

Learn how to properly use the STAAD.offshore module to simulate wave loadings on jacketstructures. Also, the second half of the classroom will focus on modeling bridge decks and applying amoving load on the system.

Description

Objectives

Details

Topics


19/30



15

Introduction to Bentley Structural


After this course users will be able to:create, extract, analyze and use the dataunderstand BIM concepts and application in the structural engineering industry

Creating Data Extracting Data Analyzing Data Using Data

Course Prerequisites:Fundamental knowledge of MicroStationAn understanding of structural design

Products Covered: Bentley Structural 2004 Edition

Through a series of exercises and lectures, students will learn the methods available in BentleyStructural to create models, extract drawings and bills of quantities. Students will learn how to exportthe data to other applications such as Midas, STAAD or RAM for analysis and reimport into BentleyStructural.

Description

Objectives

Details

Topics


20/30



16

InRoads Fundamentals XM Edition 8.9 with MicroStation


After this course students will be able to:

navigate and use the InRoads Interface

create a CAD files to be used for InRoads graphics using Project Defaults display surface contours, features and triangles create horizontal geometry alignments from graphics create and edit horizontal alignments through curve definitions create profiles and cross sections create and edit vertical PIs and define alignments create a corridor with the Roadway Designer create a surface from a corridor create and update cross sections annotate cross sections generate end-area volumes and volumes reports generate an XML report and fixed format reports

InRoads interface Setting up an InRoads project Project Defaults Surface Types Surface features Creating existing ground surfaces Displaying surfaces

Surface properties

Improving surface quality Creating, editing, and displaying Horizontal

alignments Creating, editing, and displaying Vertical

alignments Displaying profiles and cross sections Annotating cross sections Templates and Components Introduction to Roadway Designer

Earthwork Volumes Reports Productivity Tools

Course Prerequisites: Students attending should have experience designing roadways and producingdesign plans, a working knowledge of the Windows operating system, as well as experience with

Products Covered: InRoads XM Edition with either MicroStation V8 XM Edition or MicroStation V82004 Edition

This course introduces civil engineering designers to using InRoads software for road design projects.This hands-on training walks students through the project design cycle; including setting up a project,existing ground data, geometry, volume design, and reporting.Students are encouraged to attend the InRoads Roadway Designer course after completing thistraining. InRoads Roadway Designer continues from this course and explores the Roadway Designer is much more detail.

Description

Objectives

Details

Topics


21/30



17

Introduction to the InRoads Roadway Designer


After this course users will be able to: create a new template from existing end conditions build a new template using the Create Template command apply templates to create a roadway corridor define transitions between templates analyze template assignments by using navigation tools in the Roadway Designer generate a sub surface from the roadway design

Changes since InRoads V8 2004 Edition Navigating through The Create Template

Command Building templates Building a corridor Template transitions

Examining the corridor

Superelevation Generating a subsurface model

Course Prerequisites: Experience with InRoads 2004 Edition Define Roadway and Roadway Modeler is recommended.

Products Covered: InRoads XM Edition, InRoads V8.8 and V8.7

During this two-hour workshop users will learn the general processes of the InRoads 8.7 RoadwayDesigner, including template lists, transitioning between templates, and side slope exceptions. This isan intermediate-level workshop.

Description

Objectives

Details

Topics


22/30



18

GEOPAK Road I V8.8


By the end of this class, the student will be able to: Define design preferences and create a GEOPAK project Extract and triangulate Digital Terrain Model (DTM) information from graphical elements Analyze a DTM Define a geometry chain using Coordinate Geometry (COGO) and horizontal alignment tools Store a parcel and alignment using Graphical COGO Create an existing ground profile and design the vertical alignment Draw existing ground cross sections Compute superelevation and draw shapes Draw proposed cross sections Calculate earthwork volume quantities Create sheet layouts for cross sections, and for plan/profile drawings Plans production annotation and the display of pavement striping Calculate seeding reports, and the limits of construction Generate a drive through of a design

Introduction to GEOPAK The Project Manager Digital terrain modeling Coordinate geometry (COGO) Horizontal alignment tools Graphical COGO

The Design and Computation (D&C)Manager Existing ground profiles Vertical alignment generator Existing ground cross sections Superelevation calculation Proposed cross sections The port viewer Earthwork calculations Cross section drawing sheets

Cross section reports and limits of construction

Labeling Plan and profile sheets D&C Manager quantities 3D modeling

Course Prerequisites: A minimum of two months of MicroStation experience is required. Anunderstanding of road design is an advantage.

Products Covered: GEOPAK Road V8.8

In this course students will learn to use GEOPAK for road design projects. This hands-on trainingwalks students through the project design cycle including: setting up a project, existing ground data,geometry, superelevation, volume calculations and drawing (plans) production. This hands-on courseuses the GEOPAK Project Manager to guide students through a typical roadway design workflow, andenables students to completely design a roadway project.

Description

Objectives

Details

Topics


23/30



19

MX Road Design with Wizards, 2004 Edition


After this class students will be able to: design an alignment design a road and superelevate it appropriately, and create pavement layers perform brief visibility analysis of the road

Quick Alignment design Alignment design Carriageway design using templates Road superelevation Earthworks (side slope) design Pavement layer design

Visibility analysis

Course Prerequisites: Basic understanding of the concepts of MX would be an advantage, but notnecessary.

Products Covered: MX 2004 Edition

This course will guide students through simple road design using the easy to follow graphical user interface (GUI). An introduction to using these tools will show a template-like approach to the designof road edges, widening, superelevation, and pavement design. The course will take students througha simple example to demonstrate the topics.

Description

Objectives

Details

Topics


24/30



20

Bentley Map Fundamentals, XM Edition


In this class we will learn: Describe the support files required by the SHP file format. Create a new map model. Attach references, rasters and features. Manipulate the display, order and symbology of features. Navigate and utilize the Command Manager. Place and modify a print border. Perform topology cleanup and creation tasks Complete operations involving the coordinate system, drawing geodesic lines, and

interpreting the design plane. Define and edit topology layers, overlaying topology layers and outputting the results of

spatial analysis.

Interoperability The Map Manager Placing and Editing features Print Preparation Cleaning and Creating Topology Working with Coordinate Systems

Analysis and Thematic Mapping

Introduction to Oracle Spatial

Course Prerequisites:Working knowledge of MicroStation functionality including element creation, modification andmanipulation tools.

Products Covered: Bentley Map

This course teaches learners how to import SHP file. Then, create new map models and attachreferences, rasters and features in Map Manager. You will learn how to manipulate the display, order and symbology of features. As well as perform topology cleanup and use the topology creation toolsto define and edit topology layers, overlaying topology layers and outputting the results of spatialanalysis.

Description

Objectives

Details

Topics


25/30



21

Essential Mapping


After this two-day course students will be able to: setup a standard GeoGraphics Project utilize various data types in projects prepare data for use within a project present data using the topology tools

Mapping History Setting up and creating a standard project Introduction to Projection Systems Working with various file types Combining and cleaning up your data Using topology to present your data

Course Prerequisites: Some basic MicroStation knowledge would be an advantage, for example,manipulation and modifying commands, and working with reference data.

Products Covered: MicroStation GeoGraphics V8 2004 Edition

This two-day course introduces the three main processes involved in map production: Data Collection,Scrubbing and Presentation. After a brief introduction into the history of mapping, and a tour of someof the Bentley innovations, the course will delve into two days of hands-on map maintenance andcreation.

Description

Objectives

Details

Topics


26/30



22

The Coordinate System Tools


After this one-hour lecture users will be able to: work with multiple data sources, including warping and transforming between various

coordinate systems

Coordinate System tools overview Master tool set Reference tool set Working with raster data Coordinate transform tools Coordinate utilities

Course Prerequisites: Some Microstation experience would be useful, including working withreference and raster files.

Products Covered: Microstation Geographics V8 2004 Edition

This one-hour lecture will provide an overview of how to define and manipulate Coordinate Systems inthe GeoGraphics workflow.

Description

Objectives

Details

Topics


27/30



23

Creating Image Presentations in Bentley Descartes


After this two-hour lecture users will be able to: prepare images for presentation, by warping and georeferencing edit the color table on images to enhance the display drape images over an existing DTM model and render the display in a 3D environment

Course Overview Georeferencing your images using the

register tools The color table editor Using the corridor tool Draping the image

Course Prerequisites Some experience in working with raster data would be an advantage.

Products Covered: Bentley Descartes V8 XM Edition

Bentley Descartes adds high-performance image operations to MicroStation, allowing warp,reference, resample, mosaic creation, reprojection and 3D terrain draping. This is a hands-on coursethat teaches image presentation techniques through real-world examples of image presentationincluding mosaics, montages, and draping with Bentley Descartes.

Description

Objectives

Details

Topics


28/30



24

WaterCAD/GEMS Modeling Basics V8 XM


Apply the basic principles of water distribution modeling and gain essential knowledge for water system design.

Building functional models using existingdata, network drawing, scenarios andalternatives management, and modelingtanks.

Course Prerequisites: Fundamental understanding of WaterCAD/GEMS software is not required butrecommended, also WaterCAD/GEMS Introduction

Products Covered: WaterCAD/GEMS

This training module begins with the basics of hydraulics theory, water distribution system modelingtheory, approach, review of the various applications for modeling, and how to effectively evaluatemodeling results.Haestad Methods Solution

Description

Objectives

Details

Topics


29/30



25

PlantSpace P&ID User


By the end of this class students will be able to: create drawings in P&ID move, copy, modify and tag components using PlantSpace tools verify and conform attributes and text parameters of components to company standards generate an intelligent P&ID identify inconsistencies, problems and query data in an Intelligent P&ID generate report data update tags and properties throughout the P&ID

Creating intelligent P&ID Reviewing and correcting problems in P&ID Querying data intelligence from the P&ID for

reporting

Course Prerequisites: Knowledge of Windows basics, including working with files in Windows Explorer Experience using MicroStation

Products Covered: PlantSpace P&IDThis one day course is intended for new and existing users. Students will learn how to createintelligent P&ID on the MicroStation platform.

Description

Objectives

Details

Topics


30/30


Bentley PlantSpace Design Series User


By the end of this class, students will be able to: use basic AccuDraw work with equipment and pipe components route pipe using Intelligent Line Strings use Design Series utilities to place and manipulate components query, inspect and verify validity of components generate reports on component data generate isometric drawings generate pipe stress information to run in third party applications generate a section view

Working with AccuDraw Working with Equipment Modeler Building a custom Equipment component Working with Piping components and

Intelligent Pipe Lines Working with Design Series Utilities

Generating Project Deliverables

Working with PlantSpace AutoISOGENmodule

Working with PlantSpace Stress Interfacemodule

Course Prerequisites: Students must have knowledge of Windows basics, including working with filesin Windows Explorer and experience using MicroStation V8.

Products Covered: PlantSpace Piping, PlantSpace EquipmentIntended for new and existing users, this course covers the 3D applications including Piping andEquipment. This course is more in-depth for learning key functionality. Students learn to design andengineer a 3D model. Once students have completed this course they will generate deliverables andcreate input files for stress analysis programs.

Description

Objectives

Details

Topics

bentley sample catalog

Documents