bentley -sap_oil-gas.pdf
TRANSCRIPT
8/2/2019 Bentley -SAP_Oil-Gas.pdf
http://slidepdf.com/reader/full/bentley-sapoil-gaspdf 1/9
Bentley Solutions: Oil & GasA Bentley White Paper
8/2/2019 Bentley -SAP_Oil-Gas.pdf
http://slidepdf.com/reader/full/bentley-sapoil-gaspdf 2/9
Bentley Solutions: Oil and Gas p. 2
The backbone of the oil and gas solutions set is the data. As owner-operators’ capital project
timelines are ever shortening, manpower resources are harder to find for design and
construction. Also, margins for operations and maintenance are being squeezed razor-thin, so
managers must look to reduce costs and increase productivity. By employing a solution setspecifically addressing your type of work, data is properly managed throughout the engineering
work process, eliminating data re-entry and data misuse and improving engineering data quality.
By adding a new approach to managing and reviewing this data, unnecessary documents can be
eliminated during the engineering process, timelines can be shortened, handover can be
streamlined, and operations and maintenance can be improved.
The advantages of data control cannot be underestimated. A common theme in data manage-
ment is “input once, use many times.” With the Bentley oil and gas solutions set, reuse of
data provides the following advantages:
• More accurate designs earlier in the project cycle
• More options can be evaluated – even with limited resources
• Ability to address economics alongside engineering
• Reduction in engineering man-hours of 20-30 percent
• Reduced cost of structural steelwork
• Improved plant quality, safety, economics, and sustainability
• Improved plant maintenance and better spare parts inventory control
Bentley Solutions for the Complete Lifecycle
Bentley offers the most comprehensive suite of solutions for the oil and gas industry, both
upstream and downstream. From mapping the area, site preparation at a new drill site,
through development to production, all the way to design, construction, operations, and
maintenance of a comprehensive refinery or gas processing plant, Bentley has a custom set
of applications that form the digital plant solution just for you!
Bentley’s digital plant solutions comprise an engineering information system that provides the
digital representation of the physical plant. Our products address data in the following categories:
• Front-end engineering
• Site preparation and planning
• Conceptual and detailed engineering
• Construction
• Operations and maintenance
• Mapping solution
Front-End Engineering
In the oil and gas industry, compressing project timescales is more important than project
cost, and the time-constraining factor on all projects is securing materials and equipment to
get the job done. Making good decisions upfront and securing increasingly long lead time
items of equipment such as vessels, pumps, and valves is of critical importance and Bentley
The advantages of data
control cannot be
under-estimated. A
common theme in data
management is “input once, use many times”.
8/2/2019 Bentley -SAP_Oil-Gas.pdf
http://slidepdf.com/reader/full/bentley-sapoil-gaspdf 3/9
Bentley Solutions: Oil and Gas p. 3
offers front-end engineering and design (FEED) tools to manage process engineering data and
equipment sizing and to quickly evaluate facility layouts for rapid project cost estimation.
AXSYS.Process
TM
– links to process simulators such as HYSYS, ApsenPlus, UniSim, and Pro/II.It Allows process engineers to rapidly prepare and evaluate design alternatives and to inter-
change process simulation and engineering design data in a common environment to ensure
data consistency. AXSYS.Process also automatically creates PFDs, preliminary P&IDs, and
links to a variety of equipment and heat exchanger sizing packages.
Bentley® PlantWiseTM – for rapid preliminary layout, weight, and cost estimation. Automatic
pipe routing allows piping and layout alternatives to be rapidly modeled and then perform cost
estimation and weight analysis in order to determine the best layout.
Site Preparation and Planning
As owner-operators face increasing environmental pressures to reduce their plant footprints,manage water runoff, and minimize environmental impact, owner-operators and EPCs need
products for site development and analysis. Bentley offers:
• Bentley® PowerCivilTM – a flexible 2D/3D tool for land development and site modeling. It
allows flexibility with visual modeling to match the way civil engineers work.
• GEOPAK® Civil Engineering Suite – for transportation and civil engineering projects including
pipelines, roads, bridges, tunnels, and dams.
• InRoads® Suite – an integrated civil solution for pipelines and roads.
Conceptual and Detailed Engineering
Proven to reduce project timescales and eliminate errors on site, Bentley’s AutoPLANT® plantdesign system is the No. 1 AutoCAD-based plant design system used world-wide on both
large distributed-enterprise projects as well as smaller plant rework projects. PlantSpace
Design System is Bentley’s MicroStation®-based plant design system.
• AutoPLANT – AutoCAD-based solutions for P&IDs, instrumentation, datasheets, 3D piping,
3D structural layout and modeling, equipment modeling, electrical raceway modeling and
pipe support modeling. Interference detection ensures construction problems are reduced
and comprehensive materials takeoffs allow for early procurement.
• PlantSpace® – MicroStation-based solutions for P&IDs, instrumentation, datasheets, 3D
piping, 3D structural layout and modeling, equipment modeling, electrical raceway
modeling and pipe support modeling.• ProjectWise® – for management of all the project drawings, models, and documents across
distributed project teams.
• ProjectWise Navigator – visual collaboration tool supporting distributed teams with
graphical navigation of 3D models and associated documents, and for visualization of
project schedules and construction simulation.
• Bentley AutoPIPE® – comprehensive pipe stress analysis.
• STAAD.Pro® – finite element modeling and analysis of structures.
Proven on a wide scale
of projects to reduce
project timescales and
eliminate errors on site,
Bentley’s AutoPLANT
plant design system is
the #1 AutoCAD-based
plant design system
used world-wide on
both large distributed-
enterprise projects as
well as smaller plant
rework projects.
8/2/2019 Bentley -SAP_Oil-Gas.pdf
http://slidepdf.com/reader/full/bentley-sapoil-gaspdf 4/9
Bentley Solutions: Oil and Gas p. 4
• Bentley® PlantFLOW® – analysis of piping flow models. Calculates steady-state single-phase
pressures, flow velocities, temperatures, and fluid properties in gas or liquid piping networks.
• Bentley® PULSTM – dynamic response analysis of fluid flow under steady-state pulsating-flow
conditions.
Construction
Helping construction operations to work out problems before they become time-consuming
delays on site, Bentley offers products that allow construction sequencing simulation, simulation
of specific construction jobs, such as crane lifts, and viewing of CAD documents without the
need to load the native CAD software at the site. Solutions include:
• ProjectWise® NavigatorTM – for 3D construction schedule simulation and job simulation
• ProjectWise – for managing all construction documents
• Bentley® ViewTM – a free tool to view MicroStation and AutoCAD CAD drawings
• Bentley® OnSiteTM – electronic field book for construction site stakeout and inspection
Operations and Maintenance
For the operations phase of the plant, Bentley offers products that manage the engineering
data and documents, as well as interface engineering data to spare parts-management systems,
maintenance systems, and other infrastructure systems for rapid access to data and documents
for operations, maintenance, and safety issues. Bentley also offers rapid as-built 3D model tools
for quick plant modification projects.
• ProjectWise® Lifecycle ServerTM – for management of engineering data. Connects to
maintenance systems such as Maximo or SAP and ensures plant operators have rapid
access to current engineering documents and data. Contains management-of-change
system to manage data as it changes in projects or maintenance.• ProjectWise – for management of all engineering documents and data. Automatic links to
Bentley Lifecycle Server.
• Bentley® CloudWorx – rapid as-built modeling in MicroStation from 3D point clouds created
by laser scanning.
Mapping Solutions
A significant asset for all oil and gas companies is the land they own or have drilling rights to.
Effectively managing these assets can directly impact a company’s bottom line.
Bentley offers a number of solutions for mapping and GIS to manage leases graphically.
These solutions include:
• Bentley® Geospatial Management – provides a geospatial view and gives spatial context to
information. Drawings, maps, models, images, vendor-specific GIS data, and business
documents can be related spatially in ProjectWise, Bentley’s premier data and document
management system.
• Bentley® DescartesTM – imaging solution integrated with MicroStation to create image
scenes for visualization and analysis with 3D terrain draping.
• GISConnect® – allows ESRI users to visualize ArcGIS shapefiles, geodatabases and other
ArcGIS related data
8/2/2019 Bentley -SAP_Oil-Gas.pdf
http://slidepdf.com/reader/full/bentley-sapoil-gaspdf 5/9
Bentley Solutions: Oil and Gas p. 5
Data for Life – Data Exchange During the Plant Lifecycle
Bentley’s solution for oil and gas addresses data management for the complete lifecycle of
the asset. By capturing engineering data during the engineering phase of the asset lifecycle,
the data is accurately saved for operations and maintenance, while significantly reducing
handover costs. The Bentley oil and gas solution provides a data warehouse specifically
designed to capture engineering data during detailed design and then manage it in the way
that engineering staff would expect to have it available during the operation of the asset.
According to Coopers & Lybrand, engineers are frustrated searching for information. They
spend 25 percent of their time searching for information, adjusting it to their purposes, and
then re-entering the information. The Coopers & Lybrand study found that by using a managed
data environment that uses industry standards, the following savings in time and cost should
be expected throughout the lifecycle:
• 10-30 percent reduction in time spent preparing for decisions
• 15-28 percent reduction in engineering costs and 1-2 months’ reduction in projectexecution time
• 30 percent increased productivity from improvement in work relations between contractors
and suppliers
• Improvement in the quality of documentation
• Better reuse of components in the project, resulting in lower maintenance costs
• A reduction of 40,000-80,000 man-hours during commissioning for a typical project
• Dramatic reduction in handover costs
• 10-20 percent reduction in maintenance and operations from improved efficiency in
operations, due to more readily available and accurate information
Bentley is also working
closely with FIATECH to
implement the ISO stan-
dard data framework for
exchange of information
during the lifecycle.
8/2/2019 Bentley -SAP_Oil-Gas.pdf
http://slidepdf.com/reader/full/bentley-sapoil-gaspdf 6/9
Bentley Solutions: Oil and Gas p. 6
Bentley’s solution for oil and gas provides the data management platform that allows users to
realize the benefits suggested above in the Coopers & Lybrand report.
Bentley is also working closely with FIATECH to implement the ISO standard data framework
for exchange of information during the lifecycle. The Bentley Plant framework (for the oil andgas solution) is based on ISO 15926, which ensures that the framework is open and easily
accessible to third-party software and supports intelligent data exchange between owner-
operators and their contractors.
With the ISO15926 framework, Bentley’s oil and gas solutions complete the lifecycle by allowing
data reuse for rapid project startup, both for greenfield and brownfield projects.
Effectively managing the data for reuse delivers significant time and cost benefits by getting
new projects started faster and with more complete information.
Case Studies
Giprotyumenneftegaz developed project deliverables and cost estimates for the West-Salym
oil field development in Russia. It was a complex project integrating many disciplines (process
site, industrial area, camp, and utilities). A huge volume of information, including survey maps,models, drawings, explanatory notes, cost estimates, and bills of materials were generated by
the many companies who worked on this project. Bentley oil and gas solutions were
employed during all design phases, allowing Giprotyumenneftegaz to maintain coordination
across disparate teams and to automate the generation of accurate deliverables. A 3D model
of the site landscape allowed the company to make the site leveling exact, as well as to
calculate earthworks, resulting in a savings of over six months in the life of the project.
PlantSpace Design Series was used to create 3D models of the facilities under design.
8/2/2019 Bentley -SAP_Oil-Gas.pdf
http://slidepdf.com/reader/full/bentley-sapoil-gaspdf 7/9
Bentley Solutions: Oil and Gas p. 7
Above: 3D PlantSpace models of the West-Salym facility.
VECO Alaska simultaneously engineered ConocoPhillips’ drill sites 3 and 4 in 2004 and 2005.
VECO reused intelligent site-4 data to create the drill site 5 design. This resulted in a 30 per-
cent cost reduction, with estimated savings of over 23,000 man-hours and approximately $2
million for this drill site. VECO used the Bentley oil and gas solutions to perform the design
and manage the data. ProjectWise security greatly reduced the misuse and loss of data. The
ability to control all of the disciplines and users at different levels helped to maintain project
integrity. ProjectWise also allowed VECO to manage and distribute the construction docu-
ments. VECO credits its cost and time reduction to better management of data and smarter
use of shared information through Bentley oil and gas solutions.
KBR uses Bentley’s plant structural analysis,
design, and documentation tools for an
existing refinery facility to support the
increased production of a fluid-catalyst
cracking unit. A structural evaluation of the
47-year-old reactor structure in Toledo, Ohio,
was required to determine the feasibility of
the proposed expansion.
Bentley’s STAAD® product was used to gen-
erate wind load on this complex structure.
Modeling was performed using the graphical
user interface. Record low execution time
for this project earned praises from the client. KBR saved 300 man-hours and $30,000 as a
result of enhanced 3D graphical views and application of wind load.
8/2/2019 Bentley -SAP_Oil-Gas.pdf
http://slidepdf.com/reader/full/bentley-sapoil-gaspdf 8/9
Bentley Solutions: Oil and Gas p. 8
Quip S.A. used Bentley’s plant visualization and simulation for its offshore platform P53.
Located 120 kilometers off the Brazilian coast and moored at a depth of 1,080 meters, this
floating producing unit (FPU) platform will have the capacity to produce and process 180,000
barrels of gas and six million normal cubic meters of gas a day. The FPU will not store the
produced oil and gas in its tanks, as they are immediately transferred to other platforms.
Quip S.A. developed the FPU P53 platform and presented all review sessions using Bentley®
NavigatorTM, which gave the engineers and technical team access to 3D visualization so
potential problems could be identified in advance. This was the first 3D visualization initiative
in Brazilian offshore projects, and now other Brazilian EPCs are starting to adopt this concept.
M7 Offshore of Norway innovatively used Bentley technologies to upgrade Bilabri-FPOS.
Whakaaropai is a Suezmax-sized vessel operating on the Maui B oil field off New Zealand for
Shell Todd Oil Services Ltd. Built in 1976 and converted in 1995/96, she was renamed Bilabri and
upgraded as part of a project to engineer a new test separator module and a riser balcony.
Tying a new module into an existing one of this size is normally a complex engineering task,
but a model was created using Bentley software with accuracy down to a millimeter by scanning
the site and obtaining a point-cloud model. Bentley CloudWorx converted the interface sections
into CAD elements to be imported into the CAD model. The firm also used PlantSpace to
produce quick, nonintelligent P&IDs, 3D models and ISO production, and 3D steel models and
drawings.
Bechtel Corporation is using Bentley’s ProjectWise system to collaborate on the Jamnagar
Export Refinery Project (JERP) in India. JERP has a plot plan bigger than that of London and a
target completion time of less than 36 months.
Bechtel is tackling this megaproject using engineering resources dispersed around the globe,including a design and engineering team of 2,500 professionals in 10 design locations, 19
offices, and eight countries. In total, the project will employ more than 90,000 people during
construction and call for the fabrication and installation of 109,170 metric tons of steel, about
5 million meters of varied-size pipe, more than 4,000 pieces of major equipment, and more
than 110,000 isometrics.
Nearly 1,000 users in nine locations are employing ProjectWise to ensure that more than
50,000 drawings are available to the correct discipline at the correct location. With
ProjectWise, the drawings can be worked on collaboratively, enabling designers in one
location to view the results of design teams in other offices almost immediately. This means
Bechtel can rapidly distribute the project work to the different locations in a much more granularway – by unit, by discipline, and even by drawing – as the needs of the project dictate.
A key advantage realized by the project team is the ability to search for and find all files that
were changed in the last week, and to cross reference the location of the files found with the
location of the person who last changed them. This enables the JERP team to regularly reassess
and redistribute their project content, optimizing productivity and reducing network traffic.
Quip S.A. developed the
FPU P53 platform and
presented all review
sessions using Bentley
Navigator, which gave
the engineers and tech-
nical team access to 3D
visualization so poten-
tial problems could be
identified in advance.
8/2/2019 Bentley -SAP_Oil-Gas.pdf
http://slidepdf.com/reader/full/bentley-sapoil-gaspdf 9/9
Bentley Solutions: Oil and Gas p. 9Bentley Solutions: Oil and Gas p. 9
Using ProjectWise to track and manage data, Bechtel has been able to facilitate the reuse of
more than 25 percent of the design and engineering information generated during construction
of the original facilities. This has proved to be critically important in meeting the project’s
aggressive schedule.
In Conclusion
Clearly, as these applications by major players in the oil and gas industry show, there is a
growing demand for software solutions that properly manage data throughout the engineering
work process. Owner-operators who are deploying these solutions have eliminated unnecessary
documents, reduced expenditures and, in many cases, seen an immediate return on their software
investment. The Bentley oil and gas solutions set offers owner-operators a comprehensive suite
of products that manage projects cost-effectively and ensure on-time project delivery.
For More Information
Contact a local Bentley office or visit www.bentley.com
© 2008 Bentley Systems Incorporated. Bentley, Bentley view, Bentley OnSite, AutoPIPE, ProjectWise LifeCycle Server, Descartes, STAAD, STAAD.Pro,Bentley Navigator, Bentley PlantWise, GEOPAK, PowerCivil, GISConnect, PlantSpace, AXSYS.Process, the ‘B’ logo, MicroStation, and ProjectWise are eitherregistered or unregistered trademarks or service marks of Bentley Systems Incorporated, or one of its direct or indirect wholly-owned subsidiaries. Otherbrands and product names are trademarks of their respective owners.