best practices for preventing slips and trips at work
DESCRIPTION
Same level slips, trips are occupational hazards that can be found in almost every type of work setting. It is estimated that more than 2 million disabling work injuries are caused each year by slips and trips, accounting to 7-10 percent of all workers' compensation costs. This webinar is designed to help employers identify potential slip and trip hazards in the workplace and prevent these types of injuries from occurring. Preventing slips and trips requires a combination of hazard identification and correction, as well as personal responsibility. This presentation will define and explain specific description of how to create a Better Working Environment and a consistently high quality process by applying 5S Technique. OSHA 29 CFR 1910.22 - Walking-Working Surfaces OSHA 29 CFR 1910.141 - General Environmental Controls Why Should you Attend: This webinar is a must attend to prevent unsafe workplace conditions and practices and provide you with a different perspective and approach that could be implemented in an organization. If your employees are exposed to injuries during work a result of slips and trips, you need to enact a new simple method for training your employees to create a better working environment and a consistently high quality process. 5S technique will help you achieve high levels of quality, safety and productivity. Workers must have a conducive working environment, for improved profits and business growth.TRANSCRIPT
- 1. Best practices for preventing Slips and Trips at work A Live Webinar by Tarek Elashry Tarek Elashry Consultant Date and Time : Tuesday, August 12, 2014 10:00 AM PDT | 01:00 PM EDT About Tarek Elashry : Tarek Elashry is a professional in Health, Safety and Environment with more than twenty years of experience in the construction/manufacturing industry ship building / Repair, building, infrastructure, pre-cast concrete and fabrication of heavy steel structures/equipment in oil/gas sector both on and offshore with basic qualifications in chemical engineering and additional qualifications in health safety and environment. He was the Health, Safety and Environment Manager in Alexandria Shipyard for over 5 years and Manager Representative for 3 ISO Systems (international quality standard ISO 9001:2008, international occupational health and safety management system OHSAS 18001: 2007, as well as Environmental Standards ISO 14001:2004 in Alexandria Shipyard. Phone Number: 510-857-5896 | Fax Number : 510-509-9659 | Address : 38868 Salmon Ter, Fremont California 94536 USA | [email protected] Copyright 2014 OnlineCompliancePanel.com To register Click Here
2. Program Objectives: It is designed to ensure that every reasonable precaution for the protection of the workers is in place. It helps the supervisor in charge of the workplace to identify what are the potential slips and trips hazard and what are the actions to be taken to prevent these hazards. 5S represents 5 disciplines for maintaining a visual workplace (visual controls and information systems). What is 5S Technique? How to apply it in your workplace? We recommend that your supervisors and workers apply 5S for a higher workstation efficiency and a fundamental goal in mass production. Best practices for preventing Slips and Trips at work To register Click Here Copyright 2014 OnlineCompliancePanel.com 3. Introduction to Best practices for preventing Slips and Trips at work Same level slips, trips are occupational hazards that can be found in almost every type of work setting. It is estimated that more than 2 million disabling work injuries are caused each year by slips and trips, accounting to 7-10 percent of all workers' compensation costs. This webinar is designed to help employers identify potential slip and trip hazards in the workplace and prevent these types of injuries from occurring. Preventing slips and trips requires a combination of hazard identification and correction, as well as personal responsibility. This presentation will define and explain specific description of how to create a Better Working Environment and a consistently high quality process by applying 5S Technique. OSHA 29 CFR 1910.22 - Walking-Working Surfaces OSHA 29 CFR 1910.141 - General Environmental Controls Why Should you Attend: This webinar is a must attend to prevent unsafe workplace conditions and practices and provide you with a different perspective and approach that could be implemented in an organization. If your employees are exposed to injuries during work a result of slips and trips, you need to enact a new simple method for training your employees to create a better working environment and a consistently high quality process. 5S technique will help you achieve high levels of quality, safety and productivity. Workers must have a conducive working environment, for improved profits and business growth. Copyright 2014 OnlineCompliancePanel.com 4. Other Upcoming Live Webinar by Tarek Elashry Best safe work practices for controlling risks for confined space - hot work - welding Safe work practices (SWP) is a process to identify, assess, and mitigate, control or eliminate the risks associated with work. Safe work practices (SWP) in an organization will provide a systematic process to ensure that all safety considerations and precautions are in place prior to starting the job. It is the employers responsibility to ensure that all employees are well trained and well informed of the work procedures. Live Session : Wednesday, July 9, 2014 10:00 AM PDT | 01:00 PM EDT, Duration:90 minutes Copyright 2014 OnlineCompliancePanel.com For more details on our upcoming webinars , please visit: Http://www.onlinecompliancepanel.com