Make / type : Hidrostal / Betsy 100H GGDescription : dry self-priming, diesel engine pump unit handling

solidsNumber / revision : S02001 / 1

Hea

d (m

)

Capacity (m³/hr)

Operating conditionsLiquid : waterCapacity max : 139 m³ at 1500 rpmCapacity max : 172 m³ at 1800 rpmHead max : 16 m at 1500 rpmHead max : 24 m at 1800 rpm

Technical dataDischarge connection : flange PN10, DN 100Suction connection : flange PN10, DN 100Weight : 1215 kgSolids handling : Ø 75 mm

DriveEngine : diesel engineMake / model : Hatz / 1D81ZMotorpower / rpm : 4 kW x 1500 rpmMotorpower / rpm maximum : 6,9 kW x 1800 rpmPower consumption / rpmstandard

: 3,2 kW x 1500 rpm

Power consumption / rpmmaximum

: 5,9 kW x 1800 rpm

Starting method : 12 volt, manual, automatic levelswitching and engine protectionsystem

Fuel tank : 180 liter

Features- large free passage- very low noise level- capable of pumping viscous liquids containing solids- large pump capacity combined with low engine power- the pump set primes very quickly even at very high suction lifts

of as much as 8.5 metres- patented Eekels electronic vacuum system- very economical. Fuel consumption is at least 50% lower than

conventional wastewater pumps- can run unrestricted in snore conditions and can run dry for long

periods- clog-resistant and wear-resistant centrifugal screw impeller- the wear liner can be adjusted from outside the pump volute (1R

and 3R)- can handle large quantities of air, up to 100 m³/hour.- automatic level switching (engine start and stop level control)- double shaft seal submerged in an oil bath guarantees extended

shaft seal life (SiC/SiC and carbon/ceramic)- pump units can be stacked

Main applications- pumping out sewage pits and cellars- pumping bentonite and deposits- pumping out surface water- emergency pump unit for fire service, water board and water

purification- pumping out excavation pits and trenches- dewatering and drainage activities- in situations requiring suction and swilling

Notes- casing doors can be locked- Aboma+Keboma certification, EC-directive 2000/14/EG Lwa:79

dB- fuel tank is built into an anti-pollution container with built-in oil

separator- hand pump for emptying the drip tray and motor oil is fitted

inside the casing- noise emissions reduced to 54dB(A) at 7 metres distance- entire casing is made of Sendzimir galvanized steel sheeting

www.eekels.euChanges reserved

PUMPING SYSTEMS

www.betsypumps.com

Betsy100HE

1. BetsyPrime electronic priming system. 2. Hidrostal non-gloging screw centrifugal pump. 3. High quality non-return ball valve highly suitable for non screened sewage. 4. Büsch vacuüm pump. 5. Low noise engine exhaust system. 6. Bunded fuel tank. 7. Modern diesel engine. 8. Completely galvanized noise reduction canopy. 9. Suction.10. Discharge.11. Control box.

Betsy Pumping Systems

PropertiesBetsyPrime electronic priming system.

Has no moving parts in the priming chamber making the system ideal for pumping contaminated liquids without the risk of blocking moving parts. Further the priming system vacuum pump is only operated when the level in the priming chamber is below a predetermined level.

Betsy Hidrostal screw centrifugal pump.

This pump has been designed to pump the most difficult liquids with a high level of solids of large sizes. Viscose and heavy liquidsfor example contaminated bentoniet and raw sewage can be easily pumped. The Hidrostal pump is extremely efficient and the power required to drive this unit is far less than conversational centrifugal pumps. It’s clog free properties and very large free passage insures the user hours of problem free pumping with lower fuel consumption. The Hidrostal pump can be supplied in deferent materials to suit your situation.

Shaft seals.

All the Betsy pumps are fitted with high grade double mechanical shaft seals submerged in an oil bath. This allows the pumps to run dry without over heating the Tungsten Silicon seal surfaces of the mechanical shaft seals.

Betsy Whisper Sound Reduction Canopies.

All the canopies are made of high quality sheet steel which are after cutting and welding are galvanized. This ensures that the canopy will stay in top condition for many years. The canopies have been designed to reduce noise emissions to a very low level and reduce contamination with the bunded fuel tank.

Lower container.

This robust container is thematically galvanized and acts as a bunded container for the fuel tank. Added fork lift channels assist in the safe transport of the pump set with fork lift truck

7 234

5

6

81

10

11

11

1. Hidrostal Screw Centrifugal Pump.2. BetsyPrime Electronic Priming System

Features - large free passage- pump is capable of long running times in snore conditions- very low noise level- capable of pumping viscous liquids containing solids- large pump capacity combined with low engine power- the pump set primes very quickly even at very high suction lifts of much as 8.5 metres- patented Eekels electronic Betsy Prime vacuum system- very economical. Energy consumption is at least 50% lower than conventional wastewater pumps- clog-resistant and wear-resistant centrifugal screw impeller- the wear liner can be adjusted from outside the pump volute (1R and 3R)- can handle large quantities of aire, up to 100m³/hour.- can run unrestricted in snore conditions and can run dry- automatic level switching (engine start and s top level control)- double shaft seal submerges in an oil bath guarantees extended shaft seal life (SiC/tungsten)- pump units can be stacked

Main applications- pumping out sewage pits and cellars- pumping out surface water- emergency pump unit for fire servie, water board and water purification- pumping out excavation pits and trenches- dewatering and drainage activities- pumping bentonite and sludge- in situations requiring suction and snoring

Notes- canopy doors can be locked- noise emissions reduced to 40 dB(A) at 7 metres distance- Aboma + Kahoma certification, EC-directive 2000/14/EG Lwa:79 dB- Fitted with an anti-pollution container with built-in oil separator- hand pump for emptying the drip tray and motor oil is fitted inside the casing- entire casing is made of Sendzimir galvanized steel sheeting

Operating conditionsLiquid : waterCapacity max : 139 m3/h at 1500 rpmHead max : 14 m at 1500 rpm

Technical dataDischarge connection : flange, PN10, DN 100Suction connection : flange, PN10, DN 100Weight : 900 kgSolide handling : Ø 75 mm

Diesel engineEngine : electric motorMake / model : RotorMotor power : 5,5 kW x 1500 rpm Power consumption : 3,2 kW x 1480 rpm Starting method : Manually or automatically level switch start / stop system

Dimensions are in millimeters

Dimensions, configuration and weight can be changed or vary without notice.

www.eekels.euSubject to change www.betsypumps.com

PUMPING SYSTEMS

Betsy100HE

Dimensions are in millimeters

Dimensions, configuration and weight can be changed or vary without notice.

www.eekels.euChanges reserved

PUMPING SYSTEMSwww.betsypumps.com

3098.

10

0

33.

0.

2066.

H(ft)

0 2010 30 40 500 36 72 108 144 180

Q l/s3Q m /h

0 158 317 475 634 792 Q usgm

H(m)

0 2010 30 40 500 36 72 108 144 180

Q l/s3Q m /h

0 158 317 475 634 792 Q usgm

8.

0

2

11.

5.

3.

0.

P(pk)

4

6

8

P(kW)

1500 rpm75 mm

Betsy 100HE

3 inch

72%

72%

73%

PUMPING SYSTEMS

Betsy100HE

Betsy Pumping Systems

Koopliedenweg 25 LN BarendrechtPostbus 2992290 AG BarendrechtThe Netherlands

partner in pumps

a product of:

Make / type : Hidrostal / Betsy 100H GGDescription : dry self-priming, diesel engine pump unit handling

solidsNumber / revision : S02001 / 1

Hea

d (m

)

Capacity (m³/hr)

Operating conditionsLiquid : waterCapacity max : 139 m³ at 1500 rpmCapacity max : 172 m³ at 1800 rpmHead max : 16 m at 1500 rpmHead max : 24 m at 1800 rpm

Technical dataDischarge connection : flange PN10, DN 100Suction connection : flange PN10, DN 100Weight : 1215 kgSolids handling : Ø 75 mm

DriveEngine : diesel engineMake / model : Hatz / 1D81ZMotorpower / rpm : 4 kW x 1500 rpmMotorpower / rpm maximum : 6,9 kW x 1800 rpmPower consumption / rpmstandard

: 3,2 kW x 1500 rpm

Power consumption / rpmmaximum

: 5,9 kW x 1800 rpm

Starting method : 12 volt, manual, automatic levelswitching and engine protectionsystem

Fuel tank : 180 liter

Features- large free passage- very low noise level- capable of pumping viscous liquids containing solids- large pump capacity combined with low engine power- the pump set primes very quickly even at very high suction lifts

of as much as 8.5 metres- patented Eekels electronic vacuum system- very economical. Fuel consumption is at least 50% lower than

conventional wastewater pumps- can run unrestricted in snore conditions and can run dry for long

periods- clog-resistant and wear-resistant centrifugal screw impeller- the wear liner can be adjusted from outside the pump volute (1R

and 3R)- can handle large quantities of air, up to 100 m³/hour.- automatic level switching (engine start and stop level control)- double shaft seal submerged in an oil bath guarantees extended

shaft seal life (SiC/SiC and carbon/ceramic)- pump units can be stacked

Main applications- pumping out sewage pits and cellars- pumping bentonite and deposits- pumping out surface water- emergency pump unit for fire service, water board and water

purification- pumping out excavation pits and trenches- dewatering and drainage activities- in situations requiring suction and swilling

Notes- casing doors can be locked- Aboma+Keboma certification, EC-directive 2000/14/EG Lwa:79

dB- fuel tank is built into an anti-pollution container with built-in oil

separator- hand pump for emptying the drip tray and motor oil is fitted

inside the casing- noise emissions reduced to 54dB(A) at 7 metres distance- entire casing is made of Sendzimir galvanized steel sheeting

www.eekels.euChanges reserved

Tel: +31 (0) 180 69 69 69Fax: +31 (0) 180 69 69 70Email: info@betsypumps.comWebsite: www.betsypumps.com