In-line

Pinpoint Carbonator

The Pinpoint Carbonator is primarily designedand suited for carbonation of beer, water,soda, wine, and other qualifying liquids butalso used for nitrogen injection and wortaeration. The product portfolio has a full rangeof available capacities (see technical specifia-tion). Smallest, model 1 inch (Size 25), ideallysuited for craft breweries, microbreweries,small wineries and other small operations withlow flw applications.

The Pinpoint Carbonator is designed for high-est CO2 saturation, and intimate gas-to-liquidbonding with micro-pore, stainless steel injec-tor plates dispersing very fie, 5 – 9 micronsize bubbles.

The injector plates in the Wittemann PinpointCarbonator are micro porous and feature

large contact on both sides. Beer passes acrossthe plates as a thin liquid fim, immediatelyreceiving full CO2 saturation even at the low-est possible flw rate. The foam head remainsstable over long time periods; when the headdoes recede, CO2 saturation continues to holdat a high level.

The immediate saturation and improvedbond¬ing provided by pinpoint carbonationreduce foaming during the transfer of beerfrom Ruh to storage and greatly reduce thebeer’s air content. Residual CO2 is used forcarbonation from Ruh stage to 2.75 volumes- or, depend¬ing on flw requirements, up to3.0 volumes - in one pass-through.

For automation of carbonation please seeproduct sheet “Automated Carbonation”

High efficiency in carbonation

BEVERAGE DESALINATION CUSTOMER SERVICE INDUSTRIAL GASES AIRCODIETOIL & GAS

Additional advantages: Carbonator benefits:

• Designed for highest CO2 saturation• The product portfolio has a full range of available capacities• Simple in-line installation, in either vertical or horizontal line runs.• Stainless steel construction• Fully suited for CIP cleaning (solutioning- in-line) or cleaning by use of a ball brush when unit removed from line and replaced with a spool piece.• Easy access to internal components (porous discs and check valves).• Lowest pressure drop of any in-line or similar carbonating device• No longer collapsed foam issues

union.dk

Union Engineering’s main activities are worldwide sales, engineering, installation and commissioning of modular and individually designed CO2 plants. We are headquartered in Denmark and have subsidiaries in China, Brazil, Dubai, Singapore, the Netherland and the USA.Union Engineering a/s · Snaremosevej 27 · DK-7000 Fredericia · Denmark. Tel.: +45 76 20 77 00 · Fax: +45 76 20 78 00 · Email: union@union.dk · www.union.dk

Scope of supply

• Pin Point Carbonator• Pressure gauge for liquid• Pressure gauge for CO2 gas• Manifold for CO2 supply with adjusting valves• Check valve• Drain valve• Stand (optional)

Design code• ASME – not applicable• PED (optional)

BEVERAGE DESALINATION CUSTOMER SERVICE INDUSTRIAL GASES AIRCODIETOIL & GAS

English units (dimension in inches)

Carbonator size/model

Max. capacity“A” “B” “C” “D” “E” “F”

Max. width

Weight lbs.bbls gpm

1” 25 13 without stand 1” 19½” 1/4” 15

2” 110 57 487/8” 41” 29½” 2” 273/4” ½” 185/8” 40

3” 350 181 50” 41½” 36½” 3” 347/8” ½” 185/8” 50

4” 550 284 50” 40½” 42” 4” 411/4” 3/4” 195/8” 62

5” 820 424 501/4” 403/4” 491/4” 5” 487/8” 3/4” 24” 75

6” 1200 620 51” 41” 60” 6” 59” 3/4” 24” 90

Metric units (dimension in mm)

Carbonator size/model

Max. capacity“A” “B” “C” “D” “E” “F”

Max. width

Weight kg.hl/hr lpm

25 30 49 without stand 25 495 6 7

51 129 215 1241 1041 749 51 705 13 473 18.2

76 411 685 1270 1054 927 76 889 13 473 22.7

102 645 1076 1270 1029 1067 102 1048 19 498 28.1

127 962 1603 1276 1035 1251 127 1241 19 610 33.7

152 1408 2346 1295 1041 1524 152 1499 19 610 40.9