bhg courts landing 12ft x 10ft valance gazebo assembly ... · pdf file1 bhg courts landing...
TRANSCRIPT
1
BHG Courts Landing 12ft x 10ft Valance Gazebo ASSEMBLY INSTRUCTIONS ITEM# BH15 -092-099-16
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
DON’T RETURN TO STORE
Questions, problems, missing parts with this product? Do not return to your retailer,please call our customer service department 9:00 a.m. to 5:00 p.m. Eastern Standard Time Monday through Friday Phone # 1-800-457-4652
contact us at www.numarkcustomerservice.com or
2
WARNINGS AND CAUTIONS
CLEANING AND MAINTENANCE
Keep all flame and heat sources away from canopy fabric.The canopy is made with flame-resistant fabric which meets CPAI-84 specifications. It is not fireproof. The canopy fabric will burn if left in continuous contact with flame source. The application of any foreign substance to the canopy fabric mayrender the flame-resistant properties ineffective with.
*
*
Wash with a mild solution of soap and water; rinse thoroughly. Dry completely. Do not
use bleach or solvents. Cover furniture with outdoor furniture covers when not in use.
This gazebo is made for explicit purpose of providing limited outdoor sun shade and is
not to be used as a toy, shelter or tent. This pergola is not intended for inclement weather
in any form including, but not limited to: rain, hail, sleet, snow and/or wind. Do not locate
structure near any open flame. Do not use structure as a support. Do not shake, lean or
climb on structure. Children under age of 10, near the structure, should be supervised by
a competent adult at all times.
*
Read through all the instructions before beginning assembly. Unpack and identify
all the parts.
Assembly by four people is recommended.
Estimated Assembly Time: 90 minutes
*
*
*
DON’T RETURN TO STORE
Remove all components from the polybag and unwrap all package materials. Please count the components, there are:
NO. Part Description Quantity
A
A2
Slim Bar
B21
B2
G
2
Short Panel
H
4
3
Short Slim Bar
B1
8
I
D1
E
F1 1
4
Post Base
Leg Post
Canopy Frame
Base Plate
DON’T RETURN TO STORE
A1 2
2
2
2C1
2
H
2
2
4
1
Long Slim Bar
Long Panel
Supporting Bar
Net
Canopy Connection Bar
Canopy Fabric
Short Slim Bar
Long Slim Bar
C2
C3
C4
Short Panel
Long Panel
Post Top DecorativeD2
F2
J
2
4
4
4
4
4
DON’T RETURN TO STORE
5
NO. Part Description Quantity
K1 8+1 spare
K2
K3 48+2 spare
K4 M6x25L Bolt
K5
M6 Metal Washer
K6 122
K7
K8
K9
K10
K11 1
Lawn Stake
Allen Wrench
K12
ACCESSORIES
K13 2
K14
1
M6x30L Bolt
4
Assembly instructions sheet
Canopy Decorative Finial
DON’T RETURN TO STORE
1
Counter Sink Bolt
50+2 spare
M6x20L Bolt
4
16+1 spare
M6 Nut
L-shaped Bracket
M6x15L Bolt
K15
K16
Triangle Bracket
S-Hook
Open Hex Wrench
Long Allen Wrench
4
4
16
1
1
Step 1
K6 x 4
K2 x 4
Repeat procedure for the other pair B1&B2.
NOTE: Please strictly complying with the graphic to tighten the bolts.
M6 Metal Washer
M6x15L Bolt
Step 2
K6 x 6K2 x 6
M6 Metal WasherM6x15L Bolt
Do not tighten completely.
6
DON’T RETURN TO STORE
Repeat procedure for the other pair A1&A2.Do not tighten completely.
NOTE: Please strictly complying with the graphic to tighten the bolts.
Step 3
Step 4
7
DON’T RETURN TO STORE
Do not tighten completely.
Repeat procedure for the other pair C1 and C2.
NOTE: The 2 brackets should be meanwhile inserted into the holes.
K6 x 8
K3 x 8
M6 Metal Washer
M6x20L Bolt
K8 x 4
L-Shaped Bracket
K6 x 8K2 x 8
M6 Metal WasherM6x15L Bolt
Repeat procedure for the other three corners.
NOTE: Please use the middle hole only for this step.
Do not tighten completely.
Step 5
8
DON’T RETURN TO STORE
Step 6
Do not tighten completely.
K6 x 8
K2 x 8
M6 Metal Washer
M6x15L Bolt
Repeat procedure for the other pair C3 and C4.
K2 x 4
M6x15L Bolt
K6 x 28
M6 Metal Washer
K3 x 24
M6x20L Bolt
NOTE: (1)The ‘inside’ means the panel with the bracket should face inside.
Repeat procedure for the other three post top decorative D2.
NOTE: The 2 brackets should be meanwhile inserted into the holes.Do not tighten completely.
(2)The blank side of the post top decorative should face inside.
Step 7
Repeat procedure for the other three brackets.
9
DON’T RETURN TO STORE
Step 7
K3 x 8
M6x20L Bolt
K6 x 8
M6 Metal Washer
Do not tighten completely.NOTE: the oblique side should be upside for the bracket K9.
K4 x 4
M6x25L Bolt
K6 x 8
M6 Metal Washer
K7 x 4
M6 Nut
Repeat procedure for the other three bars F2.Do not tighten completely.NOTE: The side with the label’TOP’ should be upside on the bar F2
Step 8
10
DON’T RETURN TO STORE
Step 9
Repeat procedure for the other three brackets K9.
Do not tighten completely.
K11 x 1
Canopy Decorative Finial
K2 x 4
M6x15L Bolt
K3 x 8
M6x20L Bolt
K6 x 12
M6 Metal Washer
Step 10
11
DON’T RETURN TO STORE
Repeat procedure for the other three legs.
Step 11
K1 x 8
Counter Sink Bolt
Repeat procedure for the other three legs D1.
Tighten all above the step’s bolts.
K2 x 16
M6x15L Bolt
K6 x 16
M6 Metal Washer
NOTE:The side with the counter sink hole should be outside for the bracket J.
Tighten all the bolts.
Step 12
12
DON’T RETURN TO STORE
Step 13
NOTE: the side with the label’short’ on the canopy fabric should be correspondent with the side marking the ‘short’ label on the slim bar.
K5 x 16
M6x30L Bolt
K6 x 16
M6 Metal Washer
Repeat procedure for the other supporting bars E. Tighten all the bolts.
K10 x 1
M6 Metal Washer
Step 14
13
DON’T RETURN TO STORE
Step 15
K12 x 16
Lawn Stake
NOTE: The entrance of the nets should be in the middle of the 2 leg post D1.
14
DON’T RETURN TO STORE
Printed in China.
Step 16
Now you can use your gazebo!.