Bibliografa

Anderson88R.C. Anderson, Inspection of Metals: Destructive Testing, ASM International, 1988, pp 83119

Assar81A. Assar, N. El-Mahllawy, M.A. Taha, Fluidity of stir-cast Al10% Cu alloy, Aluminum 57 (12) (1981), pp 807810.

Azzi02L. Azzi, F. Ajersch, Development of aluminum-base alloys for forming in semi solid state, in: TransAl Conference, Lyon, France, 2002, pp. 2333.

Chai92G. Chai, T. Roland, L. Arnberg, L. Backerud, Studies of dendrite coherency in solidifying aluminum alloy melts by rheological measurements, in: 2nd International Conference of Semisolid Material Processing, 1992, pp. 193201.

Choudhury02P. Choudhury, S. Das, B.K. Datta, J. Mater. Sci. 37 (2002), pp 21032107.

Durman91M. Durman, S. Murphy. Precipitation of Metastable -Phase in a Hypereutectic Zinc-Aluminum Alloy Containing Copper, Acta Metall. et Materialia, 1991, Vol.39 (10), pp 2235-2242.

EJB10E. Jareo B. Estudio del efecto del Cu, del Al y de la velocidad. de enfriamiento en la secuencia de enfriamiento de aleaciones Zn-Al-Cu. Tesis Doctoral, Cinvestav 2010.

EDBJ14E.D Jareo Betancourt, Efecto de la permanencia a la temperatura de sobrecalentamiento en una aleacin Zn4Al4.5Cu, artculo 2014.

Fan02Z. Fan, Semisolid metal processing, Int. Mater. Rev. 47 (2) (2002) 4985.

Flemings91M.C. Flemings, Behavior of metal alloys in the semi-solid state, Metal. Trans. A 22A (May) (1991), pp 952981.

Gervais80E. Gervais, H. Levert, M. Bess, Trans. AFS 68 (1980), pp 183194.

Goodwin00J.W. Goodwin, R.W. Hughes, Rheology for Chemists and Introduction, Royal Society of Chemistry Publication, UK, 2000.

Hanna93M.D. Hanna. ACuZinc: Improved Zinc Alloys for Die Casting Applications. International Congress and Exposition, March 1993. Detroit, MI, USA.

Hanna97M.D. Hanna, M.S.Rashid. High Strength, High temperature and High Strains Applications of a Zinc based alloys. 1997. US Patent No.5, pp 603-552.

Han92P. Han, Ed., Tensile Testing, ASM International, 1992, p 28.

Hash06Hashemi, S. Foundations of materials science and engineering, 2006, 4th edition, McGraw-Hill, ISBN 007-125690-3.

Jareo10Jareo E.D. The effects of Cu and cooling rate on the fraction and distribution of epsilon phase in Zn4Al(35.6)Cu alloys. J. Alloys and Comp. 490 (2010), pp. 524-530

Kirkwood94D.H. Kirkwood, Semisolid metal processing, Int. Mater. Rev. 39 (5) (1994), pp 173189.

Li99B.J. Li, C.G. Chao. Phase Transformation of Zn-4Al-3Cu Alloy during Heat Treatment. Metallurgical and Materials Transaction A, 1999, 30, pp 917-923.

MA00D. Ma, Y. Li, S. C. NG, H. Jones. Unidirectional Solidification of Zinc rich Zn-Cu peritectic alloys-I Microstructure Selection, Acta Mater., 2000, 48, pp 1741-1751.

Mehrabian72R. Mehrabian, M.C. Flemings, Die castings of partially solidified alloys, AFS Trans. 80 (1972), pp 173182.

MH9Metal Handbook, ASM, Vol. 09 - Metallography And Microstructures (1985), pp 32-33.

Murphy80S. Murphy, Solid-Phase Reactions in the Low Cooper Part of the Al-Cu-Zn System. Zeitschrift fuer Metallkunde, 1980, 71, pp 96-102.

Nafisi04S. Nafisi, O. Lashkari, R. Ghomashchi, A. Charette, Effect of Different Fraction Solids on the Fluidity of Rheocast 356 AlSi Alloy, Multi Phase Phenomena and CFD Modeling and Solidification in Materials Processes, TMS Publication, North Carolina, March 2004, pp. 119128.

Osorio02W.R. Osorio, A. Garca. Modeling dendritic structure and mechanical properties of Zn-Al alloys as a function of solidification conditions, Mater. Sci. Eng. A325 (2002), pp 103-111.

Pandey98J.P. Pandey, B.K. Prasad, Metall. Mater. Trans. 29A (April 1998), pp 12451255.

Poirier94D.R. Poirier, G.H. Geiger, Transport Phenomena in Materials Processing, TMS Publication, 1994.

Prasad97B.K. Prasad, A.K. Patwardhan, A.H. Yegneswaran, Z. Metallkd.88 (4) (1997), pp 333338.

Rashid91M. S. Rashid, M.D. Hanna. Creep-Resistant Die Cast Zinc Alloys. 1991. US Patent No. 4, pp 990-310.

Rollez03D. Rollez, M. Pilles, N. Erhard, Ultra Thing Wall Zinc Die Casting, Die Casting Engineer, Marzo 2003, pp 32-35

Santish96J. Sathish, S.V. Sambasivam, S. Seshan, Indian Foundry J, (Aug, 1996), pp 2730.

Shield55R.T. Shield, On the Plastic Flow of Metals under Conditions of Axial Symmetry, Proc. R. Soc., Vol. A233, 1955, p 267

Sury02M. Suery, Mise en Forme des alliages metalliques a letat semi solide, LAVOISIER Publication, France, 2002

Trk03Trk, M. Durman, E.S. Kayali, The effect of Cu and Al on the mechanical properties of gravity-cast hyper-eutectic Zn-Al-based alloys, Z. Metallkd. 94 (9) (2003), pp 1001-1005.

Taylor42W.J. Taylor, The Hardness Test as a Means of Estimating the Tensile Strength of Metals, J.R. Aeronaut. Soc., Vol. 46 (No. 380), 1942, pp 198202

Uetani01Y. Uetani, H. Takagi, K. Matsuda, S. Ikeno, Semi-continuous casting of mechanically stirred A2014 and A390 aluminum alloy billets, in: M. Sahoo, T.J. Lewis (Eds.), Light Metals Conference, COM, Toronto, 2001, pp. 509520.

Voort99George Vander Voort, Metallography: Principles and Practices, ASM International, 1999, pp 383385 and 391393

WAP79Treatise on Material Science, vol. 13, Wear Academic Press, New York, NY, 1979, pp 363442.

Wazer66V. Wazer, L.K. Colwell, Viscosity and Flow Measurement, J.W. Publication, 1966.

Winter03R. Winter, Melting and Handling of Zinc Alloys, Die Casting Engineer, Marzo 2003.

ndice de tablas.2-1 Composicin de Aleaciones Zamak segn la norma ASTM B240.ndice de figuras.2-1 Die casting machine.2-2 Sistema de inyeccin de cmara caliente.2-3 Sistema de inyeccin de cmara fra.2-4 Efecto del contenido de Cu en la resistencia a la tensin en aleaciones Zn4AlxCu.2-5 Los componentes de una mquina de ensayos mecnicos con accionamiento por tornillo tuerca. Para la configuracin mostrada, moviendo la cabeza ms baja hacia arriba produce tensin en el espacio inferior entre la cruceta y la base.2-6 Deformacin bajo un indentador de dureza. (a) moldeado de arcilla. (b) acero de bajo carbono.2-7 Ciclo trmico grupo I.2-8 Ciclo trmico grupo II.2-9 Ciclo trmico grupo III.ndice de imgenes.