268

BIBLIOGRAPHY

Abram, S. (1984), Development of Small Scale Industries in Bihar, Capital

Publishing House, New Delhi.

Abramovitz, M. (1956), “Resource and Output Trends in the U.S. since 1870”,

American Economic Review, Vol. 46, No. 2, pp. 5-23.

Acharya, S. and Nair, N.K. (1978), “Empirical Issues in Total productivity

Measurement: An Experiment with cement industry in India”, Productivity,

Vol. 19, No. 3, pp. 365-375.

Aggarwal, C. and Chandra, V. (1994), “Financing Small and Medium enterprises

in the Asia-Pacific Region”, Small Industry Bulletin for Asia and the

Pacific, United Nations, New York, No. 29, pp. 17-34.

Ahluwalia, I.J. (1985), Industrial Growth in India: Stagnation since Mid-Sixties,

Oxford University Press, New Delhi, India.

Ahluwalia, I.J. (1991), Productivity Growth in Indian Manufacturing, Oxford

University Press, New Delhi, India.

Aigner, D.J. and Chu, S.F. (1968), “On Estimating the Industry Production

Function”, American Economic Review, Vol. 58, No. 4, pp. 826-39.

Ali, A.I., and Seiford, L.M. (1993), The Mathematical Programming Approach to

Efficiency Analysis in H.O. Fried, C.A.K. Lovell & S.S. Schmidt (Eds.),

The Measurement of Productive Efficiency, New York: Oxford University

Press, pp. 120-159.

Anderson, D. (1982), “Small Industry in Developing Countries : A Discussion of

issues”, World Development, Vol. 10, No. 11, pp. 913-48.

269

Ark, B. Van (1996), Productivity and Competitiveness in Manufacturing: A

comparison of Europe, Japan and The United States, in Wagner, K. and B.

Van Ark (eds), International Productivity Differences, Elsevier Science

B.V., Amsterdam.

Arora, Nitin (2005), Economic Reforms and Total Factor Productivity in Indian

Manufacturing Sector, Unpublished M.Sc. (Hons. School) Economic,

Dissertation, Punjab School of Economics, Guru Nanak Dev University,

Amritsar.

Arora, V. (2009), Economic Reforms and Industrial Disparities in Indian

Manufacturing Sector, Unpublished Ph.D. Thesis, Faculty of Economics

and Business, Guru Nanak Dev University, Amritsar, Punjab, India.

Arun, M.G. (1999), “Modernising Indian Small Scale Enterprises”, The Industry

Magazine, Vol. 1, No. 9.

Arya, I.C. (1981), “On measuring Technological Change in Cement Industry in

India”, Artha Vijanana, Vol. 23, No. 2, pp. 167-75.

Arya, I.C. (1985), “Technology and Productivity of Cement Industry in India- A

Case Study of Fourteen Cement Companies”, Artha Vijanana, Sept., Vol.

25, No. 3, pp. 259-279.

Ashutosh, R. (2002), “Globalisation and After”, Economic and Political Weekly,

Vol. 37, Jan. 26-Feb.1, pp. 309-312.

Austria, M.S. and Martin, W. (1995), “Macroeconomic Instability and Growth in

Philippines, 1950-87: A Dynamic Approach”, The Singapore Economic

Review, Vol. 40, No. 1, pp. 65-81.

270

Avkiran, N.K. (1999), “An Application Reference for Data Envelopment Analysis

in Branch Banking: Helping the Novice Researcher”, International Journal

of Bank Marketing, Vol. 17, No. 5, pp. 206-220.

Avkiran, N.K. (2006), Productivity Analysis in the Services Sector with Data

Envelopment Analysis, 3rd

Edition, University of Queensland Business

School, The University of Queensland, Australia.

Awasthi, Dinesh (1991), Regional Patterns of Industrial Growth in India, Concept

Publishing Company, New Delhi, pp. 13-41.

Babu, V.G. and Vani, K.V. (1983), “Linear Estimation of the CES Function-

Indian Manufacturing Sector 1949-58 and 1959-66”, The Indian Economic

Journal, Oct-Dec. No. 2, pp. 91-95.

Bagchi, A.K. (1980), Private investment in India: 1900-1939, Orient Longman,

New Delhi.

Baghel, L.M.S. and Pendse, N.G. (1997), “An Econometric Analysis of

Productivity Growth and Technological Change in Total Manufacturing

Sector of India”, The Indian Economic Journal, Vol. 44, No. 2, pp. 39-58.

Bairam, E. (1990), “Aggregate and Disaggregate Production Function Estimates

for the Indian Economy using Annual Time Series and Cross Regional

Data”, The Indian Economic Journal, Vol. 38, No. 2, pp. 152-168.

Bala, N. (2007), Economic Reforms and Growth of Small Scale Industries, Deep

and Deep Publications, New Delhi.

Balakrishan, P. and Pushpangadan, K. (1994), “Total Factor Productivity Growth

in Manufacturing Industry: A Fresh look”, Economic and Political Weekly,

July 30, Vol. 229, pp. 2028-35.

271

Balasubrahmanya, M.H. (1997), “India’s Small Industry Development Strategy in

the 90s–A Review”, Sri Lankan Journal of Management, Vol. 2, April-

June, pp. 136-154.

Balasubrahmanya, M.H. (1999), “India Small Industry Policy in the 90s Waning

Protectionism”, The Indian Economic Journal, Vol. 47, No. 2, pp. 76-83.

Balasubramanya, M.H., Mathirajan, M. and Balachandra, P. (2002), “Research

and Development in Small Industry in Karnataka”, Economic and Political

Weekly, September 28-October 4, Vol. 37, No. 39, pp. 4010-17.

Balu, V. (1991), “Financing of Small Scale Industries: A Sample Study Including

Notified Backward Areas”, The Indian Journal of Economics, Vol. LXXII,

Part II, No. 285, pp. 258-289.

Banerjee, A. (1975), Capital Intensity and Productivity in Indian Industry,

Macmillan Company, New Delhi, India.

Banerjee, A., Dolado, J.J., Galbraith, J.W. and Hendry, D.F. (1993),

Cointegration, Error-Correction and the Econometric Analysis of Non-

Stationary Data, Oxford University Press, Oxford.

Banerjee, A. (1971), Capital Intensity and Productivity in Indian Industry, 1st

edition, Macmillan Company, New Delhi.

Banker, R.D., Charnes, A. and Cooper, W.W. (1984), “Some Models for

Estimating Technical and Scale Efficiencies in Data Envelopment

Analysis”, Management Science, Vol. 30, No. 9, pp. 1078-1092.

Bardi, Narayan Ratt and Madheswaran, S. (2004), Productivity Growth of Indian

Production Function and Technical efficiency, Econometric Society.

272

Barn, P.A. (1962), Political Economy of Growth, p.277, quoted by Reddy, K.C.

(1988), Sickness in Small Scale Industries, Ashish Publishing House : New

Delhi, p. 1.

Barro, R. (1991), “Economic Growth in a Cross-Section of Countries”, Quarterly

Journal of Economics, Vol. 106, No. 2, pp. 407-443.

Barro, R.J. and Sala-I-Martin, X. (1992) “Convergence,” Journal of Political

Economy, Vol. 100, No. 2, pp. 223-251.

Barro, R.J. and Sala-I-Martin, X. (1995), Economic Growth, New York: McGraw-

Hill.

Barthwal, R.R. (1975), “The Economics of Production Function : Some Empirical

tests for Indian Paper industry”, Southern Economic Review, Vol. 4, No. 3,

pp. 173-193.

Battese, G.E. and Coelli, T.J. (1992), “A Model for Technical Inefficiency Effects

in a Stochastic Production Function for Panel Data”, Empirical Economics,

Vol. 20. No. 1, pp. 325-332.

Bauer, P.W. (1990), “Recent Developments in the Econometric Estimation of the

Frontiers”, Journal of Econometrics, Vol. 46, No. 1-2, pp. 39-56.

Beri, C.C. (1962), Measurements of Production and Productivity in Indian

Industry, Asia Publishing House, New Delhi.

Bernard, A. and Durlauf, S. (1995), “Convergence of International Output”,

Journal of Applied Econometrics, Vol. 10, No. 2, pp. 97-108.

Bernard, A. and Durlauf, S. (1996), “Interpreting Tests of Convergence

Hypothesis”, Journal of Econometrics, Vol. 71, No. 1-2, pp. 161-174.

273

Berndt, E.R. and Fuss, M.A. (1989), Economic Capacity Utilization and

Productivity Measurement for Multiproduct Firms with Multiple Quasi-

Fixed Inputs, National Bureau of Economic Research Working Paper No.

2932. Cambridge, Mass : National Bureau of Economic Research.

Bhagwati, Jagdish (1961), “Industrial Capacity and Utilization: Need for a Sample

Survey of Manufacturing”, The Economic Weekly, Vol. 13, No. 27/29, pp.

1165-1168.

Bhanu, V. (2006), “Economic Reforms and Capacity Utilization in Indian

Industries”, Asian Economic Review, Vol. 48, No. 1, pp. 1-21.

Bose, A.N. (1964), Implications of Capacity Utilisation: A Study of the Calcutta

Metropolitan District, Sree Saraswaty Press, Calcutta.

Brahma, S. and Subas, P. (1979), Modern Small Scale Industry: A Wheel within a

Wheel, Shanker Brahma Samaj Publications, Pune.

Briscoe, G.P., Brien, P.O. and Symth, D.J. (1970), “The Measurement of Capacity

Utilization in United Kingdom”, The Manchester School of Economic and

Social Research, Vol. 38, No. 2. pp. 91-117.

Brumer, B. (2001), “Estimating Confidence Intervals for Technical Efficiency:

The Case of Private Farms in Slovenia”, European Review of Agricultural

Economics, Vol. 28, No. 3, pp. 285-306.

Bryce, D. Murray (1960), Industrial Development-A Guide for Accelerating

Economic Growth, McGraw Hill Book Co. New York.

Budhin, M. and Paul, S. (1961), “The Utilisation of Indian Industrial Capacity:

1949-59”, Indian Economic Journal, Vol. 9, No. 1, pp. 19-35.

274

Burange, L.G. (1992), “The trends in Capacity Utilisation in the Indian

Manufacturing Sector:1951-1986”, Journal of Indian School of Political

Economy, Vol. 4, No. 5, pp. 445-455.

Burange, L.G. (1993), “Implications of Full Capacity Utilisation of Manufacturing

Sector in Indian Economy”, Arthavijnana, Vol. 35, No. 2, pp. 160-181.

Caves, D.W., Christensen, L.R. and Diewert, E.W. (1982), “The Economic Theory

of Index Numbers and the Measurement of Input, Output and Productivity”,

Econometrica, Vol. 50, No. 6, pp. 1393-1414.

Chadha, V. (1995), “Technological Modernisation of Small Sector In India”,

Journal of Institute of Economic Research, Vol. 36, No. 3, October-

December. pp. 19-27.

Chadha, V. and Sandhu, P.S. (1987), “State Industrial Service Consultancy in

Punjab”, Journal of Institute of Economic Research, Vol. 22, No. 2, July.

pp. 23-35.

Chamberlin, E. (1947), The Theory of Monopolistic Competition, 5th

Edition,

Cambridge: Harvard University Press.

Chandra, K. (2004), Globalisation, Liberalisation, Privatisation and Indian

Policy, Isha Books, New Delhi.

Charnes, A., Cooper, W.W., Lewin, A.Y. and Seiford, L.M. (eds.) (1994), Data

Envelopment Analysis: Theory, Methodology and Applications, Kluwer

Academic Publishers, Boston, USA.

Charnes, A., Cooper, W.W. and Rhodes, E. (1978), “Measuring the Efficiency of

Decision Making Units”, European Journal of Operational Research, Vol.

2, No. 6, pp. 429-444.

275

Chartered Secretary (1997), Recommendation of Abid Hussian Committee on

Small Enterprises, March 1997.

Chatterji, S. (1997), “Banking on Effective Implementation”, The Economic

Times, 4th

August.

Chattopadhyay, S.K. (1995), Industrial Sickness in India, Sane Publications, New

Delhi.

Chattopadhyay, S.K. (2004), “Trends in Total Factor Productivity of

Manufacturing Sector in West Bengal: A Sectoral and Temporal Analysis”,

Reserve Bank of India Occasional Papers, Vol. 25, No. 1, 2 and 3,

Summer, Monsoon and Winter.

Chen, E.K.Y. (1976), “Factor Inputs, Total Factor Productivity and Economic

Growth: The Asian Case”, The Developing Economies, Vol. 15, No.1,

March, pp. 121-43.

Chen, Tser-Yieth and Tsai-Lien Yeh (1997), “A Study of Efficiency Evaluation in

Taiwan’s Banks”, International Journal of Service Industry Management,

Vol. 9, No. 5, pp. 402-415.

Chenery, H.B., (1960), “Pattern of Industrial Growth”, The American Economic

Review, Vol. 1, No. 4, Sept., p. 635.

Chhikara, M.S.(1996), “Development Finance for Small Scale Sector During

Economic Liberalization”, Abhigyan, Autumn, pp. 7-16.

Chittenden F, Hall G and Hutchinson P. (1996), “Small Firm Growth, Access to

Capital Markets and Financial Structure: Review of Issues and an Empirical

Investigation”, Small Business Economics, Vol. 8, pp. 59-67.

276

Chowdhary, A.H.M.N.(1990), “Small and Medium industries in Asian Developing

Countries”, Asian Development Review, Vol. 18, No. 2, pp. 143-64.

Clark, C. (1957), The Conditions of Economic Progress, The Macmillan and Co.

Ltd.: London.

Coelli, T. and S. Perelman, S. (1998), “A Comparison of Parametric and Non-

Parametric Distance Functions: With Application to European Railways”,

European Journal of Operational Research, Vol. 117, No. 2, pp. 326-339.

Coelli, T.J., Rao, D.S.P. (2001), An Introduction to Efficiency and Productivity

Analysis, 2nd

Edition, Kluwer, Boston.

Coelli, T., Rao, D.S.P., and Battese, G.E. (1998), An Introduction to Efficiency

and Productivity Analysis, Kluwer Academic Publishers, Boston, USA.

Coelli, T.J., Rao, D.S.P., O’Donnell, C. and Battese, G.E., (2005), An Introduction

to Efficiency and Productivity Analysis, 2nd

Edition, Kluwer, Boston.

Colman, David and Frederick Nixon (1986), Economics of Change in Less

Developed Countries, Philip Allan Publishers Ltd, Hertfordshire.

Cortes, M., Berry, A. and Ishaq, A. (1987), Success in Small and Medium Scale

Enterprises: The Evidence from Colombia, Johns Hopkins Press,

Baltimore, Maryland.

DCSSI (1992), Report on second All-India Census of Small Scale Industrial Units,

New Delhi.

DCSSI (2002), Small Scale Industries in India: An Engine of Growth, New Delhi.

277

DCSSI (2003), Quick Results Third All India Census of Small Scale Industries:

2001-02, New Delhi.

Debreu, G. (1951), “The Coefficient of Resources Utilization”, Econometrica,

Vol. 19, No. 3, pp. 273-92.

Desai, Vasant (2000), Dynamics of Entrepreneurial Development and

Management, Himalaya Publishing House, New Delhi.

Dunning, J.H. (1993), Multinational Enterprises and the Global Economy,

Addison-Wesley.

Eilon, S. (1981), Production Planning and Control, Bombay, Universal Book

Corporation.

Fan, S., Zhang, X. and Robinson, S. (1999), Past and Future Sources of Growth

for China, EPTD Discussion paper No. 53, International Food Policy

Research Institute, Washington, D.C.U.S.A.

Färe, R., Grosskopf, S. and Kokkelenberg, E.C. (1989), “Measuring Plant

Capacity, Utilisation and Technical Change: A Nonparametric Approach”,

International Economic Review, Vol. 30, No. 3, pp. 655-666.

Fare, R.S., Grosskopf, S., Norris, M. and Zhang, Z. (1994), “Productivity Growth,

Technical Progress and Efficiency Change in Industrialized Countries”,

American Economic Review, Vol. 84, No. 1, pp. 66-83.

Fare, Rolf, Grosskopf, Shawna and Lovell, C.A. (1994), Production Frontiers,

Cambridge University Press, Cambridge, U.K.

Farrell, M.J. (1957), “The Measurement of Productive Efficiency”, Journal of the

Royal Statistical Society, Series A, Vol. 120, No. 3, pp. 253-282.

278

Ferrantino, M.J., Ferrier, G.D. and Linvill, C.B. (1995), “Organisational Form of

Efficiency: Evidence from Indian Sugar Manufacturing”, Journal of

Comparative Economics, Vol. 21, No. 1, pp. 29-53.

FICCI (2004), FICCI Study on Bank Financing for the SSI Sector, New Delhi.

Gajanan, S.N. (1995), “Estimating Technical Inefficiency in Selected Indian

Manufacturing using Frontier Production Functions”, Indian Economic

Journal, Vol. 43, No. 2, pp. 97-120.

Gandhi, J.C. (1967), Marketing Management in the cotton Textile Industry of

Rajasthan, Unpublished Ph.D. Thesis, University of Jodhpur, Jodhpur.

Ganguly, N. (1988), “Small Scale Sector Problems and Prospects”, Yojana, Vol.

32, No. 4, pp. 25-48.

Ganpathy, K.G. (1986), The Curse of Sick Industries, Industrial Times, October-

November.

Ghobadian, A. and Gallear, D. (1996), “Total Quality Management in SMEs”,

Omega, Vol. 24, No. 1.

Gill, G. (1997), New Economic Policy and Indian Industrial Scenario,

Unpublished M.Sc. (Hons. School) in Economics Dissertation, Punjab

School of Economics, Guru Nanak Dev University, Amritsar, Punjab,

India.

Godwa, J.M. and Krishnamurty, M.G. (1997), “A SWOT Analysis: The Indian

Paper Industry”, Indian Management, June.

Goldar, B. (1983), “Productivity Trends in Indian manufacturing Industry: 1951-

1978”, Indian Economic Review, Vol. XVIII, No. 1, pp. 73-95.

279

Goldar, B.N. (1985), “Unit Size and Economic Efficiency: A Study of Small Scale

Washing Soap Industry in India”, Artha Vijnana, Vol. 27, No. 1, pp. 80-96.

Goldar, B.N. (1986), Productivity Growth in Indian Industry, Allied Publishers,

New Delhi.

Goldar, B. (1993), “Employment Growth in Modern Small Scale Industries in

India”, Journal of India School of Political Economy, Vol. V, No. 4, Table

5, p. 658.

Goldar, B. and Gupta, D.B. (1989), Industrialising India’s North-Eastern Region:

A Study of District Industry Centres, Institute of Economic Growth and

National Institute of Public Finance and Policy, New Delhi.

Goldar, B. and Kumari, A. (2003), “Import Liberalisation and Productivity

Growth in Indian Manufacturing Industries in the 1990s”, The Developing

Economies, Vol. XLI, No. 4, pp. 436-460.

Griliches, Z. (1966), “Production Functions in Manufacturing: Some Preliminary

Results”, in M. Browns, Theory and Empirical Analysis of Production

Studies in Income and Health, No. 31, National Bureau of Economic

Research, pp. 307.

Griliches, Z. and Jorgenson, D.W. (1966), “Sources of Measured Productivity

Change: Capital Input”, American Economic Association Papers, May

1966.

Grosskopf, S. (1993), “Statistical Inference and Nonparametric efficiency”,

Journal of Productivity Analysis, Vol. 7, No. 1, pp. 161-176.

Harrison, B. (1994), “The Small Firms Myth”, California Management Review,

November.

280

Hulten, Charles R. (1992), Total Factor Productivity: A short Biography, NBER,

Working Paper, p. 7471.

Huxtable, N. (1995), Small Business Total Quality, London, Chapman and Hall.

Jain, A.K. (1996), “Moulding mindsets in small scale industrial sector in New

Millennium”, Business Today, Vol. 5, No. 3, pp. 166-171.

Jain, Neelam (2004), “Small Scale Industries in the New Millennium”, SEDME,

Vol. 31, No. 1, pp. 63-72

Jain, O.P. (1980), “Export Consortia of Small Units”, SEDME, Vol. 7, No. 2, June,

pp. 105-116.

Jayadevan, C.M. (1995), “Inter-State Variations in Employment Growth Rates:

Evidences from Organised Industry in India”, Indian Journal of Regional

Science, Vol. XXVII, No. 1 & 2, pp. 41-56.

Jayasheela, and Hans, V.B. (2006), “Small Scale Industries in India: Present

Position and New Initiatives”, SEDME Journal, December, Vol. 33, No. 4,

pp. 11-20.

Jha, R. and Sahni, B.S. (1993), Industrial Efficiency: An Indian Perspective,

“Efficiency in the Indian Sugar Industry (Chapter 13)”, South Asia Books,

New Delhi, India.

Kambhampati, U.S. (2006), “Trade Reforms and the Efficiency of Firms in India”,

Oxford Development Studies, Vol. 31, No. 2, pp. 219-233.

Kendrick, J.W. (1961), “Productivity Trends in United States”, National Bureau of

Economic Research, New York.

281

Khan, L. (1985), “Small Scale Industries in India: Export Performance, Problems

and Prospects”, Indian Journal of Marketing, Vol. 15, No. 7, March.

Khan, M.A. (1983), “Industrial Sickness and Revitalization Through Banks”,

SEDME, Vol. 20, No. 1, March.

Khanka, S.S. (1985), “Development of Small Scale Industries in Assam”, Yojana,

Vol. 42, No. 9, pp. 10-25.

Kim and Lee (2005), “The Sources of Economic Growth of the East Asian Newly

Industrialised Countries”, Journal of Japanese and International

Economies, Vol. 8, pp. 124-156.

Koopmans, T.C. (1951), Activity Analysis of Production and Allocation, Cowles

commission for Research in Economics, Monograph No. 13, Wiley, New

York.

Kumar, Anita (2001), WTO and Indian Industry, (Mimeograph), Institute of

Economic Growth, New Delhi.

Kumar, P.S.M., Pillai, N.C. (1996) “Technical Efficiency in the Spinning Mills of

Kerala”, Productivity, Vol. 37, No. 1, p. 118.

Kumar, Rakesh (2002), “Efficiency and Technology Undercurrents in Indian

Textile Industry”, The Indian Economic Journal, Vol. 49, No. 2, December,

pp.73-81.

Kumar, S. (2001), Productivity and Factor Substitution: Theory and Analysis,

Deep and Deep Publications Pvt. Ltd., New Delhi.

282

Kumar, S. (2002), “Inter-Temporal and Inter-State Comparison of Total Factor

Productivity in Indian Manufacturing Sector: An Integrated Growth

Accounting Approach”, Artha Vijnana, Vol. 45, Nos. 3-4, pp. 161-184.

Kumar, S. and Arora, N. (2007a), “An evaluation of Technical Efficiency of

Indian Capital Goods Industries: A Non-parametric Frontier Approach”,

Productivity, Vol. 48, No. 2, pp. 182-197.

Kumar, S. and Arora, N. (2007b), “Technical and Scale Efficiency in Indian

Manufacturing Sector: A Cross-sectional Analysis Using Deterministic

Frontier Approach”, The Asian Economic Review, Vol. 49, No. 3, pp. 433-

458.

Kumar, S. and Arora, N. (2009), “Does Inspiration or Perspiration Drive Output

Growth in Manufacturing Sector?: An Experience of Indian States”, The

Indian Journal of Economics, Vol. LXXXIX, No. 355, pp. 569-598.

Kuznets, Simon (1969), Economic Growth and Structure-Selected Essays, Oxford

and IBH Publishing Company, New Delhi.

Lakdawala, D.T. and Sandesara, J.C. (1960), Small Industry in Big City - A Survey

in Bombay, University of Bombay Press, Bombay

Latha, K., Lavanya (2005), “Small Scale sector: A Nursery of Economic

Development”, SEDME, Vol. 32, No. 2, June, pp. 19-24.

League of Nations (1945), Industrialisation and Foreign Trade, Economic and

Financial Transit Department, Geneva, p. 10.

Lee, K., Pesaran, H.M. and Smith, R. (1996), Growth and Convergence; A Multi-

country Empirical Analysis of Solow Growth Model, ESRC Development

Economics Study Group, Annual Conference, University of Leicester.

283

Leibenstein, H. (1966), “Allocative Efficiency v/s X-Inefficiency”, American

Economic Review, Vol. 56, pp. 392-415.

Leung, Charles Ka-Yui (1998), “Convergence in Economic Growth”,

Departmental Working Papers _104, Chinese University of Hong Kong,

Department of Economics.

Levin, and L. M. Seiford (1997), Intensities: A DEA Framework. Ecological

Economics, Vol. 48, pp. 37-47.

Lichtenberg, F.R. (1994), Testing the Convergence Hypothesis, The Review of

Economics and Statistics, Vol. 76, No. 3, pp. 576-579.

Mahajan, V.S. (1980), “Small and Tiny Units Impact of Government Assistance”,

Economic Times, October, Bombay.

Mahambare, V. and Balasubramanyam, V.N. (2005), Trade Liberalisation and

Indian Manufacturing Sector, Cardiff Business School, Aberconway

Building Column Road, Cardiff CF 10 EU.

Martin, W. and Warr, G. (1990), The Declining Economic Importance of

Agriculture, invited paper to the 34th Annual Conference of the Australian

Agricultural Economic Society, Brisbane, Feb. 12-15.

McAdam, R. and McKeown, M. (1999), “Life After ISO9000: An Analysis of the

Impact of ISO9000 and Total Quality Management on Small Businesses in

Northern Ireland”, Quality Management, Vol. 10, No. 2.

Mehta, S.S. (1974), “Analysis of Sugar Industry-A Production Function

Approach”, Anvesak, Vol. 4, No. 2, pp. 197-205.

284

Mehta, S.S. (1980), Productivity, Production Function and Technical Change,

Concept Publishing Company, New Delhi.

Mishan, E.J. (1977), The Economic Growth–An Assessment, Allen and Unwin

Publishers Ltd.

Mishra, P. (2006), “Performance of Small Scale Manufacturing units in the Post-

Economic Reform with Special Reference to Factor Productivity: A study

of Five Industrial Clusters in Orissa”, Asian Economic Review, Vol. 48, No.

2, pp. 329-349.

Mitra, A. (1999) “Total Factor Productivity Growth and Technical Efficiency in

India Industries”, Economic and Political Weekly, Vol. 34, No. 31,p. M-98.

Mohan, V. M. (2001), “Capacity Utilisation Concepts and their Relevance to

Costs and Returns to Fruits and Vegetable Cold Stores”, Indian Journal of

Agriculture Economics, Vol. 36, No. 2, pp. 59-67.

Mohanty, A. and Kar, J. (1999), “Credit Rationing and SSI units”, Prajnan, April-

June Issue.

Mohanty, B. (1983), Economics of Small Scale Industries–A Case Study of

Cuttack District, Unpublished Ph.D. Thesis, Cuttack University,

Bhuvneshwar.

Morris, S., Basant, R., Das, K., Ramchandran, K. and Koshy, A. (2001), The

Growth and Transformation of Small Industries in India, Oxford University

Press, New Delhi.

Murty, M.N., Kumar, S. and Paul, M. (2006), Environmental Regulation,

Productive Efficiency and Cost of Pollution Abatement: A Case Study of the

285

Sugar Industry in India, Working Paper Number WP213, Institute of

Economic Growth, Delhi University Enclave, New Delhi.

Myrdal, G. (1956), An International Economy, Harper and Brothers : New York.

Mydral, G. (1958), Economic Theory and Underdeveloped Regions, Vora and Co.

Publishers, Bombay.

Myrdal, G. (1968), Asian Drama-An Enquiry in to the poverty of Nations, The

Penguin Press : London

Nadiri M., Ishaq (1970), “Some Approaches to the Theory and Measurement of

Total Factor Productivity : A Survey”, Journal of Economic Literature,

pp. 1137-77.

Narain, S. (1997), “SIDBI A Promotional cum Development Agency for SSIs”,

Laghu Udhyog Samachar.

Nath, H.K. (1996), Relative Efficiency of Small Scale Industries in India: An Inter-

State Comparison, M.Phil. Dissertation, Jawaharlal Nehru University, New

Delhi, India.

National Council of Applied Economic Research (1972), Under-Utilisation of

Industrial Capacity, New Delhi.

Nayar (1998), Globalisation: The Past in Our Present, in K. Das Dabendra, (ed.),

Indian Economy after 50 years of independence, Deep and Deep

Publication, New Delhi.

Nehru, J.L. (1958), Speeches- March 1953-August-1957, New Delhi, p. 11.

286

Nemedia (1997), “Globalisation: Historical Perspective”, CBN Economic and

Financial Review, Vol. 36, No. 4.

Neogi, C. and Ghosh, B. (1994) “International Efficiency Variations in India

Manufacturing Industries”, The Journal of Productivity Analysis, Vol. 5,

No. 3, pp. 301-24.

Neogi, C. and Ghosh, B. (1998), “Impact of Liberalization on performance of

Indian Industries: A firm level study”, Economic and Political Weekly, Vol.

33, No. 9, pp. M16-M24.

Nikaido, Y. (2004), “Technical Efficiency of Small Scale Industry; Application of

Stochastic Production Frontier Model”, Economic and Political Weekly,

Vol. 39, No. 6, pp. 592-597.

Norsworthy, J.R. and Jamg, S.L. (1992), Empirical Measurement and Analysis of

Productivity and Technological Change, Elsevier Science Publisher, North

Holland.

Olson, J.A., Schmidt, P. and Waldman, D.M. (1980), “A Monte Carlo Study of

Estimators of Stochastic Production Functions”, Journal of Econometrics,

Vol. 13, No. 1, Vol. 67-82.

Page, J.M. (1984), “Firm Size and Technical Efficiency: Applications of

Production Frontiers to Indian Survey Data”, Journal of Development

Economics, Vol. 16, September-October, pp. 129-152.

Panda, N.M. (1996), “New Small Enterprise Policy: Towards Strengthening Small

Sector to Face Economic Challenges”, in D Bhorali (ed.), Structural

Reform in India, Mittal Publications, New Delhi.

287

Papola, T.S. (1981), Impact of Concessional Finance on Industrial Development

of Backward Area, Best Publications, Lucknow (U.P.).

Parmeshwarn, K.P. (2002), “Some Basic Problems in the Way of Development of

Small Scale Ancillary Industries”, Productivity, Vol. 115, No. 1-2.

Pradhan, G. and Barik, K. (1999), “Total Factor Productivity Growth in

Developing Economies: A Study of Selected Industries in India”, Economic

and Political Weekly, Vol. 34, No. 31, pp. M92-M97.

Qommen, M.A. (1972), Small Industry in India’s Economic Growth - A Case

Study of Kerala, Research Publication in Social Sciences (Mimeograph),

Jawaharlal Nehru University, New Delhi.

Qommen, M.A. and Evenson, R. (1977), “Scale Economies, Elasticity of

Substitution and Productivity Change in the Agro-Based Industries in

India”, Asian Economic Review, Vol. 19, No. 1, pp. 10-23.

Raikhy, P.S. and Nanda, P. (2006), Impact of WTO Regime on Punjab Industry,

Guru Nanak Dev University Press, Amritsar.

Rajesh, R.S.N and Swamy, D. (2002), Economic Reforms Efficiency Change and

Productivity Growth: An Inter State Analysis of Indian Unorganised

Manufacturing Sector, Research Paper Department of Humanities and

Social Sector IIT, Chennai, India.

Ramakrishna, P. (1975), New Entrepreneurship in Small Scale Industry in Delhi,

Economic and Scientific Research Foundation, New Delhi.

Ramappa, B.T. and Basavaraja, M.G. (2006), “Impact of Liberalisation and

Globalisation on Small Scale Industries in India”, Southern Economist,

August 1, Vol. 45, No. 7, pp. 11-14.

288

Ramesha, K. (1999), “Bank Credit to Small Scale Industrial Sector: A study in

Inter-state Disparity”, Prajnan, Vol. 27, No. 3, April, pp. 49-57.

Rao, J.M. (1996), “Indices of Industrial Productivity Growth: Desegregation and

Interpretation” Economic and Political Weekly, 7th December, pp. 3177-

3188.

Ray, S. (2002), Economic Reforms and Efficiency of Firms: The Indian

Manufacturing Sector During the Nineties, Institute of Economic Growth,

University of Delhi Enclave, Delhi–110007, India.

Ray, S. (2004), “MNEs, Strategic Alliances and Efficiency of Firms: Emerging

Trends”, Economic and Political Weekly, Vol. 39, No. 5, pp. 434-440.

Ray, S.C. (1997), “Regional Variation in Productivity Growth in Indian

Manufacturing: A Nonparametric Analysis”, Journal of Quantitative

Economics, Vol. 13, No. 1 (January 1997), pp. 73-94.

Reddy, I.C.C. (1990), Financing of Small Scale Industries in India, Himalaya

Publishing House, New Delhi.

Reserve Bank of India (1992), A Report of the Committee to Examine the

Adequacy of Institutional Credit to the SSI Sector and Related Aspects,

Rural Planning and Credit Department, Mumbai.

Richmond, J. (1974) “Estimating the Efficiency of Production”, International

Economic Review, Vol. 15, No. 2, pp. 515-521.

Romer, G.D., Mankiw, N.G. and Weil, D. (1992), “A Contribution to the Empires

of Economic Growth”, Quarterly journal of Economic, Vol. 1, pp. 407-438.

289

Sahoo, K. Biresh (2008), “Decomposition of Total Factor Productivity Growth in

Nonparametric Framework: A Reconsideration”, Indian Journal of

Economics, Jan., Vol. LXXXVIII, No.3, pp. 493-521.

Sahoo, S.K. (2004), “Small Scale Manufacturing Industries in India”, The Indian

Economic Journal, Vol. 51, No. 2, April, pp. 52-58.

Sandesara, J.C. (1966), “Scale and Technology in Indian Industry”, Oxford

Bulletin of Economics and Statistics, Vol. 28, pp. 181-98.

Sandesara, J.C. (1982), Efficiency of Incentives for Small Industries, Industrial

Development Bank of India, Bombay.

Sandesara, J.C. (1988), “Small Industry Development Programmes in India-

Efficacy, Explanations, and Lessons: Some Field Studies”, In Suri,

K.B.(ed.), Small Scale Enterprises in Industries Development: The Indian

Experiences, Sage Publications, New Delhi.

Sandesara, J.C. (1988a), “Small Scale Industrialization- The Indian Experience”,

Economic and Political Weekly, 26th March.

Sandesara, J.C. (1991), “New Small Enterprises Policy: Implications and

Prospects” Economic and Political Weekly, 19th October.

Sandesara, J.C. (1993), “Modern Small-Scale Industry, 1972 and 1987-88:

Aspects of Growth and Structural Change”, Economic and Political

Weekly, February, pp. 223-229.

Sargent, T.C. and Rodriguez, A.R. (2000), “Labour or Total Factor Productivity:

Do We Need to Choose?”, International Productivity Monitor, Vol. 1, No.

1, pp. 41-44.

290

Seiford, L.M. and Thrall, R.M. (1990), “Recent Developments in DEA: The

Mathematical Programming Approach to Frontier Analysis”, Journal of

Econometrics, Vol. 46, No.1-2, pp. 7-38.

Selvam, M. (1996), “SWOT Perspectives of SSI”, Laghu Udhyog Samachar.

Sharma, R. and Diwan, P. (1994), Big Opportunities in the Small Scale Sector,

DCSSI, New Delhi.

Sharma, S. and Upadhyay, V. (2003-04), “An Analysis of Total Factor

Productivity in Indian Fertilizer Industry”, Indian Economic Journal, Vol.

51, No.1, pp. 89-105.

Sidhu, Hina (2007), “State Level Variations in Factor Productivity in the Indian

Industry”, Indian Journal of Regional Science, Vol. XXXIX, November 2,

pp. 1-19.

Singh, B. (1961), The Economics of Small Scale Industries–A Case Study of

Moradabad, Asia Publishing House, Delhi.

Singh, Kanwaljit (2002), Financing of Small Scale Industries in Punjab–An

Evaluation of the Role of Institutional Finance, Unpublished Ph.D. Thesis,

Panjab University, Chandigarh.

Singh, M.P. (1984), “Sharing of Productivity Gains in Indian Sugar Industry: An

Empirical Study”, Indian Journal of Industrial Relations, Vol. 20, No. 2,

pp. 222-230.

Singh, N.K. (1982), Industrial Progress and Economic Growth, Classical

Publishing Company, New Delhi, p.155.

291

Singh, N.P., Singh, P. and Pal, S. (2007), “Estimation of Economic Efficiency of

Sugar Industry in Uttar Pradesh: A Frontier Production Function

Approach”, Indian Journal of Agriculture Economics, Vol. 62, No. 2, pp.

232-243.

Singh, P. and Ajit, D. (1995), “Production Functions in the Manufacturing

Industries in India: 1974-90”, Reserve Bank of India Occasional Papers,

Vol. 16, No. 2, pp. 241-266.

Singh, P.N. (1964), “A Study off Productivity in Export Industry: Sugar in U.P.”,

Indian Journal of Labour Economics, Vol. 6, No. 4, pp. 353-359.

Singh, R.R. (1968), Productivity Trend and Wages, Eastern Economist, Vol. 4,

April.

Singh, S.P. (2006a), “Technical and Scale Efficiencies in the Indian Sugar Mills:

An Inter-State Comparison”, Asian Economic Review, Vol. 48, No. 1, pp.

87-99.

Singh, S.P. (2006b), “Efficiency Measurement of Sugar Mills in Uttar Pradesh”,

The ICFAI Journal of Industrial Economics, Vol. 3, No. 3, pp. 22-38.

Singh, S.P. (2007), Performance of Sugar Mills in Uttar Pradesh by Ownership,

Size and Location”, Prajnan, Vol. 35, No. 4, pp. 333-360.

Singh, S.P. and Agarwal, S. (2006), “Total Factor Productivity Growth, Technical

Progress and Efficiency Change in Sugar Industry of Uttar Pradesh”, The

Indian Economic Journal, Vol. 54, No. 2, pp. 59-82.

Singh, T. (2001), “Total Factor Productivity in the Manufacturing industries in

India”, The Indian Economic Journal, Vol. 48, No. 2, pp. 108-117.

292

Small Industries Development Bank of India (2000), “Report on Small Scale

Industrial Sector”, Thomson Press, Faridabad.

Smithies, A. (1957), “Economic Fluctuations and Growth”, Econometrica, Vol.

25, No. 1, pp. 1-52.

Solow, R.M. (1957), “Technical Change and Aggregate Production Function”,

Review of Economics and Statistics, Vol. 39, No. 3, pp. 312-320.

Subramanian, K.K. and Pillai, P. Mohanan (1994), “Liberalisation and Small

Industry-Need for Growth Strategy in Kerela”, Economic and Political

Weekly, Vol. XXIX, No. 33, pp. 23-44.

Subrahmaniyan, G. (1982), “Regional Efficiency in Indian Sugar Industry: A

Production Function Approach”, Margin, Vol. 14, No. 2, pp. 65-71.

Suresh, V. and Shashidhar, P. (2009), Competitiveness of Small Scale Industries of

India, Conference on Global Competition and Competitiveness of Indian

Corporate, Indian Institute of Management, Bangalore, pp. 439-452.

Sutcliffe, R.B. (1971), Industry and Under development, Addison-Wesley

Publishing Company: London.

Tendulkar, S.D. and Bhavani, T.K. (1997), “Policy on Modern Small Scale

Industries: A Case of Government Failure”, Indian Economic Review, Vol.

XXX, No. 21, pp. 88-105.

Thirlwall, A.P. (1999), Growth and Development, 6th Edition, The Mcmillan and

Co. Ltd. London.

Tinbergen, J. (1942), “ZurTheorie der Langfirstigen Wirtschaftsentwick Lung”,

Weltwirtsschaftliches Archiv, Vol. 55, No.1, pp 511-49; translated as “On

293

the Theory of Trend Movements”, in Klassen, L.H., Koych, L.M. and

Witteveen, H.J. (eds) (1959), Jan Tinbergen Selected Papers, Amsterdam,

North Holland, pp. 82-201.

Todaro, M.P. (1987), Economic Development in the Third World, 3rd Edition,

Orient Longman Ltd: New Delhi.

UNCTAD (1998), Handbook on Foreign Direct Investment by Small and Medium

Sized Enterprises, Lessons for Asia, Geneva.

UNIDO (1989), Environment Conductive to Sustained Growth of Small and

Medium Scale Enterprises, Discussion Paper ID/WG. 492/4 for the First

Consultation on Small and Medium Scale Enterprises including Co-

Operatives (Ban, Italy), Vienna, Robson G. & Gallagher C. (1993), “The

Job Creation Effects of Small and Large Firm interaction”, International

Small Business Journal, Vol. 12, pp. 23-37.

United Nations (1955), “Process and Problems of Industrialisation in

underdeveloped countries”, New York.

United Nations (1963), UN Committee for Industrial Development, Report of the

Third Session, 13th-31st May, e/3781,E/C, 5/37, New York.

Vasal, R. (1996), Small Scale Sector in India: An Economic Analysis Mimeo,

Unpublished Dissertation, University of Mumbai, Mumbai.

Vepa, Ram K. (1973), “Industrial Estates: A Tool for Development of Backward

Areas”, Asian Productivity, Vol. 7, No. 1, pp. 22-58.

Vepa, Ram K. (1988), Modern Small Industry in India: Problems and Prospects,

Sage Publications, New Delhi.

294

Vepa, Ram K. (1991), “Small Can be Beautiful: Recommendations for Small

Enterprises” Economic and Political Weekly, 5th July.

Vepa, Ram K. (1991), “Small Industry Comes to Age”, Financial Express, 25th

August.

Vidharbha Industries Association (1976), Financial and Credit Worthiness and

Indian Small Scale Sector: An Empirical Survey, Working Paper 20/1976,

Gujarat.

Wu, Y. (1997), Productivity and Efficiency: Evidence from the Chinese regional

Economies, Discussion Paper No. 97-18, Department of Economics,

University of Western Australia.

Yusuf, Shahid and Stiglitz, J.E. (2000), Development Issues: Settled and Open, In

Meier, G.M and Stiglitz, J.E. (eds.), Frontiers of Economic Development,

Oxford University Press, New York.

*********************