big white catalog_2010

BIG WH I T EThe lighting catalogue 2010

5-LightingDesign-HK10-U1-U4.qxd:HK09-1a-SLV-U1-U4.qxd 14.09.2009 10:54 Uhr Seite 1

BIG WHITE 2010 | CONTENTS 003

Ambience 005 – 014Table and floor fittings 015 – 027Pendants 028 – 089Wall and ceiling fittings 090 – 185

BASICS 005 – 185

Index 681 – 690

INDEX 681 – 690

Mains 3phase track 186 – 217Mains 1phase track 218 – 229Easytec® II mains track chrome/black 230 – 241Easytec® II mains track silver grey 242 – 257Linux Light® low voltage track chrome 258 – 263Linux Light® low voltage track silver grey 264 – 275C–Track® 12V low voltage shelf system 276 – 281Glu–Trax® 12V low voltage shelf system 282 – 285Cabline 286 – 287Apollo low voltage track 288 – 289Wave low voltage stick system 290 – 293Low voltage wire system 294 – 297

TRACK SYSTEMS 186 – 297

LIM® Light in Motion 298Multispot 1195 299Stage Factory Line® 300 – 305Display and sticklights 306 – 323BookLED shelf 324 – 325Cupboard fittings 326 – 333

SPECIAL RANGE 298 – 333

Recessed fittings 334 – 411Downlights 412 – 431Grid recessed fittings 432 – 433Downlights 434 – 455Ground fitted fittings 456 – 459

RECESSED FITTINGS 334 – 459

Adegan 460 – 461Lamp series 462 – 511Floor, wall and ceiling fittings 512 – 545Floodlights 546 – 565Recessed fittings 566 – 601

OUTDOOR 460 – 601

Mini LED module chain 602 – 603Light chains 604Multi LED kit, Fibre set LED 605Penlight® 606 – 607Lightbar 608 – 611LED strip 612 – 633Multifunction LED module 634 – 635

DECORATIVE LIGHT 602 – 635

LED accessories 636 – 643Power units 12V= 644Power units 24V= 645Ballasts 646Conventional transformers 647 – 649Electronic transformers 650 – 651Accessories general 652 – 655Lamps 656 – 667Lamps LED 668 – 674Energy saver lamps 675 – 680

ACCESSORIES AND LAMPS 636 – 680

5-LightingD-HK10-Inhalt.qxp:1a-SLV-HK10-Imhalt.qxd 18.09.2009 15:09 Uhr Seite 003

5-LightingD-HK10-Basis_0.qxp:HK_09.qxd 24.08.2009 13:54 Uhr Seite 04

AMBIENCE


BASICS | AMBIENCE006


BASICS | AMBIENCE 007

Versions:chrome/black/beige 155422

SOPRANA floor lamp

Accessories/Included parts:Foot switch in mains cable (incl.)

4.6230~

Socket/Lamp:E27/AGL (excl.)60W max.orE27/energy saver (excl.)Up to max. length: 17.5 cm

Material:Shade: textile/PSStick: steel/textile leather

Dimensions:Product-Ø/H: 40/165 cmShade-Ø/H: 40/28 cmBase-Ø/H: 25/3 cmMains cable: 2.15 m


SOPRANA pendant lamp

2.2230~

Socket/Lamp:E27/AGL (excl.)3x 60W max.orE27/energy saver (excl.)Up to max. length: 14.5 cm

Material:Shade: textile/PSCanopy: steel

Dimensions:Shade-Ø/H: 50/26 cmCanopy-Ø/H: 15/2.5 cm


SOPRANA table lamp

Accessories/Included parts:Switch in mains cable (incl.)

2.5230~


Material:Shade: textile/PSStick: steel/textile leather

Dimensions:Product-Ø/H: 32/58 cmShade-Ø/H: 32/22 cmBase-Ø/H: 17.5/2.5 cmMains cable: 2 m

1.5 m



Versions:metal brushed/black 155440

DECREDO


2.0230~


Material:Shade: textile/PSBase: steel/textile leather

Dimensions:Product-Ø/H: 30/53.5 cmShade-Ø/H: 30/20 cmBase-Ø/H: 10/24.5 cmMains cable: 1.85 m



ACCANTO



2.0230~


Material:Shade: textile/PSBase: textile leather

Dimensions:L/W/H: 30.5/30.5/61 cmShade-Ø/H: 30.5/22 cmBase-L/W/H: 11/11/31.5 cmMains cable: 1.85 m

E27 LED lamppage 673

Accanto with E27 LED lamp



Versions:Canopy nickel brushedAcrylic glass satin finishblack 155400beige 155402

CORDA

1.8230~

Versions:Canopy chromeGlass satin finishblack 155290

LASSON

Note:The changing visual originates fromthe woven black threads.

4.4230~

Socket/Lamp:E27/AGL (excl.)4x 60W max.orE27/energy saver (excl.)Up to max. Ø/L: 8/18cm

Material:Steel/textile/glass

Dimensions:L/W/H: 80/30/21 cmCanopy-L/W/H: 22/8/2.5 cm

1.5 m

1.5 m

Socket/Lamp:E27/AGL (excl.)3x 60W max.orE27/energy saver (excl.)Up to max. length: 11.6 cm

Material:Steel/textile/acrylic




Versions:Canopy nickel brushedlight grey 155460

CRESA

Note:With flaked filigree ornaments.

0.7230~


Material:Steel/textile


1.5 m



Versions:Glass satin finishchrome/white 146902

RIOTTE SMALL


1.8230~

Socket/Lamp:E14/AGL (excl.)40W max.orE14/energy saver (excl.)Up to max. Ø/L: 5/11.5 cm

Material:Steel/glass

Dimensions:Product-Ø/H: 15/34.5 cmShade-Ø/H: 15/15.5 cmBase-Ø/H: 12/2 cmMains cable: 1.5 m


RIOTTE WALL

1.0230~



Dimensions:Product-Ø/H/D: 15/28.5/21 cmShade-Ø/H: 15/15.5 cmCanopy-Ø/H: 11/2.5 cm


RIOTTE


3.15230~

Socket/Lamp:E27/AGL (excl.)60W max.orE27/energy saver (excl.)Up to max. Ø/L: 6/15 cm


Dimensions:Product-Ø/H: 25/51.5 cmShade-Ø/H: 25/21.5 cmBase-Ø/H: 18/3 cmMains cable: 1.5 m




MALANG floor lamp

Accessories/Included parts:Inline switch (incl.)

8.6230~

Socket/Lamp:E27/AGL (excl.)60W max.orE27/energy saver (excl.)20W max.Up to max. Ø/L: 5.5/12.5 cm


Dimensions:Product-Ø/H: 31.5/172 cmShade-Ø/H: 31.5/22 cmBase-Ø/H: 25/2.5 cmMains cable: 1.5 m


MALANG ceiling lamp

2.1230~


MALANG table lamp


5.2230~

Socket/Lamp:E27/AGL (excl.)60W max.orE27/energy saver (excl.)20W max.Up to max. Ø/L: 5.5/12.5 cm


Dimensions:Product-Ø/H: 31.5/54 cmShade-Ø/H: 31.5/22 cmBase-Ø/H: 20/3 cmMains cable: 1.5 m

Socket/Lamp:E27/AGL (excl.)2x 60W max.orE27/energy saver (excl.)2x 20W max.Up to max. Ø/L: 5.5/13.5 cm


Dimensions:Product-Ø/H: 32/13.5 cm

Malang LEDpendant lamppage 069

Malang pendant lamppage 073


FLOOR AND TABLE LAMPS


BASICS | FLOOR AND TABLE LAMPS016

Socket/Lamp:G6.35/2-pin base (excl.)50W max.

Material:Aluminium/ceramic

Dimensions:Jib arm: 42/39 cmBase-Ø: 20 cmShade-Ø: 9 cmMains cable-L: 1.9 m

Accessories/Included parts:Transformer (incl.)2-step switch (incl.)Mains plug (incl.)

Versions:silver greyceramic white 146209

DEWI DESK 3.7

90°

350°12~

230~

Socket/Lamp:G6.35/2pin base (excl.)50W max.


Dimensions:Jib arm: 42/39 cmBase-Ø: 23 cmShade-Ø: 9 cmStick-L: 85 cmMains cable-L: 1.9 m

Accessories/Included parts:Transformer (incl.)2-step switch (incl.)Mains plug (incl.)


DEWI FLOOR 5.4

90°

350°12~

230~


017

90°

Socket/Lamp:G9/G9 (excl.)40W max.


Dimensions:Product-H: 55 cmGlass-Ø/L: 8.3/10 cmBase-Ø: 17.5 cmMains cable-L: 2.2 m

Accessory/Included parts:Inline switch (incl.)

Versions:chromeGlass white 146182

BIG SURA DESK 2.0

50°230~

Big Sura Wallpage 167

Big Sura Singlepage 075

Socket/Lamp:E27/AGL (excl.)60W max.orE27/energy saver (excl.)max. Ø/L: 7/16 cm


Dimensions:L/W/H: 38/26/37 cmMains cable-L: 1.8 m



NEW BANKERS 2.55

350°230~


BASICS | FLOOR AND TABLE LAMPS 019

Lamp:Flat LED (incl.)6W

Material:Aluminium

Dimensions:Product-L/W/H: 40.5/14/41 cmMains cable-L: 2 m

Accessories/Included parts:LED plug-converter (incl.)Switch in mains cable (incl.)

Versions:aluminium brushedLED warm white 146046

CYGNIS Design by CDC 1.0230~

With the Cygnis table lamp, our product designers followed the conceptual for-mulation to create a high-class table lamp with clean lines for a simple, elegantliving style.

Together with modern LED technology Cygnis captivates with its purist elegantdesign and high functionality. The ultra flat 6W LED surface matches the clear,geometrical shaped lines and provides a clear, warm white light output. Theswitch of the 41 cm high, entirely aluminium produced designer lamp is includedin the connection lead. With the integrated LED driver in the mains plug the lampis ready for use with 230V.


Daves pendant lamppage 081

020

Socket/Lamp:GU10/GU10 (excl.)35W max.

Material:AluminiumFrame galvanized

Dimensions:W/H/D: 10.5/14/11 cmMains cable-L: 1.5 m

Accessories/Included parts:Mains plug (incl.)

Versions:silver grey 132832

CUBIX I 0.5230~100°

IP44

Socket/Lamp:GU10/GU10 (excl.)2x 35W max.

Material:AluminiumFrame galvanized

Dimensions:W/H/D: 18/14/11 cmMains cable-L: 1.5 m

Accessories/Included parts:Mains plug (incl.)


CUBIX II 0.95230~100°

IP44

Socket/Lamp:G53/QRB111 (excl.)50W max.

Material:Aluminium

Dimensions:L/W/H: 20/17/11 cmMains cable-L: 2.5 m

Accessories/Included parts:E-transformer (incl.)Dimmer (incl.)Mains plug (incl.)


DAVES UNI Design by CDC 0.8512~

230~

Daves Wallpage 152


022

Kalu wall and ceiling lampspage 092

Light Eye Glasspage 062



90°

350°


Material:Aluminium

Dimensions:L/W/H: 15/9/19.2 cmMains cable-L: 2 m

Accessories/Included parts:E-transformer (incl.)Foot switch in mains cable (incl.)

Versions:alu brushed 147286

KALU FLOOR 1 Design by CDC 0.712~

230~

45°

350°

Socket/Lamp:GX10/Britespot ES111 (excl.)35W

Material:Aluminium

Dimensions:L/W/H: 16.5/9.5/19 cmMains cable-L: 1.5 m

Accessories/Included parts:Ballast (incl.)Foot switch in mains cable (incl.)


KALU FLOOR BRITESPOT ES111 Design by CDC 0.95

90°

350°

Socket/Lamp:G53/QRB111 (excl.)2x 50W max.

Material:Aluminium

Dimensions:L/W/H: 30/9/19.2 cmMains cable-L: 2 m

Accessories/Included parts:E-transformer (incl.)Foot switch in mains cable (incl.)


KALU FLOOR 2 Design by CDC 1.012~

230~

230~

Socket/Lamp:GU10/ES111 (excl.)75W max.

Material:Steel

Dimensions:Product-H: 19 cmHead-Ø: 14.5 cmBasis-Ø: 18 cmMains cable-L: 2 m


Versions:chrome 132862

LIGHT EYE FLOOR Design by CDC 0.9230~90°

Socket/Lamp:GX53/GX53 energy saver (excl.)9W max.


Dimensions:Product-Ø/H: 15/17 cmHead-Ø: 15 cmBasis-Ø/H: 14/2.5 cmMains cable-L: 1.5 m


Versions:chromeGlass satin finish 132872

LIGHT EYE DESK Design by CDC 0.8230~


BASICS024

2.5

Material:Steel

Dimensions:Tube-L: 2.90 mBase-Ø: 18 cm

Note:Clamp range can be adjustedbetween1.55 m and 2.95 m.


LIGHT EYE MOVE TELESCOPE stick with base Design by CDC


Material:Steel

Dimensions:Head-Ø: 15 cmMains cable-L: 4 m


Note:Lamp head with metal clip forusage with Light Eye MoveTelescope (132902).Clamp range: 25.5 mm max.


LIGHT EYE MOVE TELESCOPE lamp head Design by CDC 0.7230~360°

Light Eye spotpage 092

Light Eye pendant lamppage 062


FLOOR AND TABLE LAMPS 025

i-Line pendantpage 042

i-Line wallpage 119

Socket/Lamp:G5/T5 energy saver (excl.)2x 35W

Material:Aluminium

Dimensions:W/H/D: 23.5/150/10 cmBasis-L/W: 34/25 cmMains cable-L: 1.8 m

Accessories/Included parts:Ballast (incl.)Dimmer (incl.)Foot switch in mains cable (incl.)Panes (excl.)

Note:Dimmer button on the lamp front.dimmable 0-100%.Diffuser-panes are not includedand have to be ordered sepera-tely. (see below).


i -LINE FLOOR 7.6230~

Material:Acrylic

Dimensions:L/W/H: 151/23.5/0.6 cm

Accessories/Included parts:Distance retainers (incl.)

Note:For fitting to the i-Line floor.

Versions:white frosted 157141blue frosted 157147

DIFFUSER-PANE for i-Line Floor 4.8


BASICS | FLOOR AND TABLE LAMPS026

Socket/Lamp:2G11/TC-L energy saver (excl.)4x 55W

Material:Aluminium

Dimensions:W/H/D: 42/185/60 cmBasis-L/W: 40/34.2 cmMains cable-L: 2 m

Accessories/Included parts:Ballast (incl.)2 switches (incl.)Mains plug (incl.)Grid (excl.)

Note:Two switches to variably operatethe lamp with half or full power.


WORK LIGHT FLOOR Design by CDC 18.7230~

Worklight pendantpage 031



Material:Ultra clean aluminium mirror finish

Dimensions:L/W/H: 54.3/14/5 cm

Note:For one fitting you will need twolouvres.Dark light louvre is suitable forworkstations according toDIN5035-7.

According to DIN5035-7 the dark light louvre is suitable for working stations. It provides a glare freelight and opitmal illuminated work place.

Versions:alu mirror finish 157154

DARKLIGHT LOUVRE for Work Light Floor 0.2


BASICS | PENDANTS028


Material:Aluminium

Dimensions:L/W/H: 126/23/5.5 cmCanopy-L/W/H: 7.5/7.5/2.5 cm

Accessories/Included parts:Electronic ballast (incl.)Canopy (incl.)

Note:Pendant lamp with dark-light lou-vre. suitable for monitor work sta-tions according toDIN 5035-7.Not dimmable!


LONG GRILL 2x 28W 5.01.5 m230~


Material:Aluminium



Note:Pendant lamp with dark-light lou-vre. suitable for monitor work sta-tions according toDIN 5035-7.Not dimmable!


LONG GRILL 2x 54W 5.01.5 m230~

PENDANTS


BASICS | PENDANTS 029

Long Grill Ceilingpage 178




Material:Aluminium

Dimensions:L/W/H: 161/13/7 cm

Accessories/Included parts:Ballast (incl.)Canopy (excl.)Connection lead (excl.)

Note:The louvre has a mirror finishreflector with chrome louvre for adownwards directed. glare freelight.The electrical connection ofseveral fittings is possible.


Canopy:L/W/H: 7.4/4/2.5 cmsilver grey 925190

HANG UP 4.0230~ 1.5 m



CORNER CONNECTOR for Hang Up 0.35

0.4

Note:To mechanically connect the fit-tings


CONNECTION SET for Hang Up

1 2

3 4


Work Light Floorpage 026



Material:Aluminium

Dimensions:L/W/H: 122.5/18.5/6 cmCanopy-L/W/H: 7.5/7.5/2.5 cm

Accessories/Included parts:Electronic ballast (incl.)Canopy (incl.)Louvre (incl.)

Note:Pendant lamp with dark-light lou-vre. suitable for monitor work sta-tions according to DIN 5035-7.Dimmable via 1-10V!

The pendant lamp Work Light is equipped with adark-light louvre, suitable for monitor work stationsaccording to DIN 5035-7.This allows a optimal illuminated work place andglare free light.


WORK LIGHT PENDANT Design by CDC 3.4230~ 2.5 m


6.4


Material:Aluminium anodizedDiffuser acrylic

Dimensions:L/W/H: 151/5.7/9.8 cmCanopy-L/W/H: 7.4/4/2.5 cm

Accessories/Included parts:Electronic ballast (incl.)

Versions:white/chrome 155011alu natural/anthracite 155012

Q-LINE SINGLE Design by CDC 3.7230~ 2 m



Dimensions:L/W/H: 151/15.5/7.5 cmCanopy-L/W/H: 7.4/4/2.5 cm



Q-LINE DOUBLE Design by CDC 230~ 2 m

032 BASICS | PENDANTS

Can easily be opened withan allen key to replace thelamp.


033

Q-Line Wallpage 115

T5 lamppage 680



Material:Aluminium anodized


Accessories/Included parts:20 cm cable (incl.)

Note:For a straight connection of 2Q-line profiles.

Versions:white/chrome 155051alu natural 155052

Q-LINE CONNECTOR 0.2230~


Dimensions:L/W/H: 9/9/5.1 cm


Note:For a 90°connection of 2 Q-lineprofiles.

Versions:alu natural 155062

Q-LINE CORNER CONNECTOR 0.3230~


Dimensions:H: 7 cm + H: 8.5 cm

Note:To fasten the Q-line profile direct-ly to the ceiling with a canopy.


Q-LINE CEILING HOLDER-SET BASIC 0.1

0.12


Dimensions:H: 8.5 cm + H: 8.5 cm

Note:To fasten several Q-line profilesto the ceiling by through wiring.


Q-LINE CEILING HOLDER-SET EXTEND

Socket/Lamp:G5.3/MR16 (excl.)35W max.



Accessories/Included parts:E-transformer (incl.)

Note:To make a straight connectionbetween 2 Q-Line profiles withintegrated lamp head.Can only be used with directmirror lamps.

Versions:alu natural ▼ 155102

Q-LINE CONNECTOR MR16 Design by CDC 0.5

Socket/Lamp:E27/AGL (excl.)60W max.orE27/energy saver (excl.)Till max. Ø/L: 7/17.5 cm


Dimensions:L/W/H: 12/5.9/27 cmReflector-Ø: 15.5 cm

Note:To make a straight connectionbetween 2 Q-Line profiles withintegrated reflector amp head.

Versions:alu natural▼ 155112

Q-LINE CONNECTOR E27 Design by CDC 230~

12~

230~

0.46




Material:AluminiumDiffuser PMMA

Dimensions:L/W/H: 149/13.5/3 cm

Accessories/Included parts:Electronic ballast (incl.)Canopy (excl.)

Note:With open cable end!Canopy must be ordered sepe-rately.Stress-relief for canopy see page076.


Canopy :L/W/H: 7.4/4/2.5 cmsilver grey 925190

KUNO 2.5230~ 1.5 m


Socket/Lamp:G5/T5 energy saver (excl.)54W

Material:Aluminium/acrylic

Dimensions:L/W/H: 119/4/6 cmCanopy-L/W/H: 5/4.5/3.5 cm


Versions:silver grey 160222alu brushed 160226

SIGHT PENDANT Design by CDC 1.55230~ 2 m



Material:Aluminium/glass

Dimensions:L/W/H: 90/14/8 cmCanopy-L/W/H: 7.4/4/2.5 cm


Versions:alu naturalGlass satin finish 183272

NEPRO 90 2.3230~ 1.5 m

Sight Wallpage 120



If the flip-light Dua-T is used asuplight, it indirectly illuminates thesurroundings via the ceiling.


Material:Aluminium

Dimensions:L/W/H: 86/15/5.5 cmCanopy-L/W/H: 7.4/4/2.5 cm


Note:Flip light.Can be used as uplight(see above) and as downlight(see left).


DUA-T Design by CDC 4.0230~ 1.5 m

Material:Aluminium/steel

Note:Accessories for direct fasteningof the Dua-T pendant lamp.The set consists of 5 parts.

Versions:alu 157509

CEILING/WALL FASTENING FOR DUA-T 0.03

Socket/Lamp:G5/T5 (excl.)2x 35W

Material:PMMA/aluminium


Accessories/Included parts:Electronic ballast (incl.)Canopy (excl.)

Note:With open cable end!Canopy must be ordered sepe-rately.Stress-relief (941174) for canopysee page 076.


Canopy :L/W/H: 7.4/4/2.5 cmsilver grey 925190

DURANZ 2.21.5 m230~

+A +A

+A +A



Socket/Lamp:G13/T8 energy saver (excl.)2x 36WandGU10/ES111 (excl.)2x 75W max.

Material:AluminiumShade PMMA


Accessories/Included parts:Ballast (incl.)Canopy (incl.)

Note:Wall holder long, see page053.


AIXLIGHT® OFFICE Design by CDC 5.32.5 m230~

+A

180°

DomeLED ES111 lamppage 671




Material:Plastic/aluminiumTube acrylic

Dimensions:L/W/H: 91/19.5/10 cmTube-Ø: 4.3 cmCanopy-L/W/H: 7.4/4/2.5 cm



TWINTUBE 1.45230~ 2.5 m

Socket/Lamp:G9/G9 (excl.)6x 40W max.


Dimensions:L/W/H: 58/31/4 cmHead-Ø: 11 cmCanopy-L/W/H: 7.4/4/2.5 cm

Accessories/Included parts:Canopy (incl.)


DINA 6 Design by CDC 2.462 m230~

360°

Lambatpage 307



LED-T wallpage 124

Socket/Lamp:G13/LED (incl.)6W total

Material:Acrylic

Dimensions:Ø/L: 2.6/100 cm

Note:Operate only with LED-T lamps!

Versions:LED white 550481LED warm white 550482

LED-T TUBE 0.3824=

30°LED

120 pce.

Socket/Lamp:G13/LED-T tube (excl.)2x 6W

Material:Aluminium

Dimensions:L/W/H: 109/14.2/8 cmCanopy-Ø/H: 6/15 cm

Accessories/Included parts:Power supply unit (incl.)Canopy (incl.)

Note:Operate only with LED-T tube!Lamp LED-T Tube (see below)must be ordered seperately.


LED-T PENDANT Design by CDC 1.651.5 m

24=

230~


042

Material:Aluminium

Dimensions:L/W: 80/5 cm

Note:To clip onto the i-Line lamp todirect the light emission.

Versions:alu 157040

i-LINE REFLECTOR 0.05

Material:Acrylic


Note:To mount on i-Line wall andPENDANTS.

Versions:white frosted 157031blue frosted ▼ 157037

i-LINE DIFFUSER-PANES 1.5


Material:Aluminium

Dimensions:L/W/H: 90/20.5/4 cmCanopy-L/W/H: 7.4/4/2.5 cm

Accessories/Included parts:Electronic ballast (incl.)Canopy (incl.)Panes (excl.)

Note:Diffuser-panes have to be orde-red seperately (see below).


i-LINE PENDANT horizontal 1.7230~ 2 m

i-Line Floorpage 025

i-Line Wallpage 119


Lamp:PowerLED (incl.)9x 1W

Material:Aluminium

Dimensions:L/W/H: 75.5/4.7/4 cmCanopy-L/W/H: 42.5/4.7/4 cm

Accessories/Included parts:LED convertor (incl.)Canopy (incl.)

Versions:alu brushed/chromeLED white 157486LED warm white 157482

i-LINE PENDANT LED Design by CDC 1.81.5 m

45°mA

350

230~ LED

9 pce.




Socket/Lamp:G5/T5 energy saver (excl.)4x 24WandG53/QRB111 (excl.)3x 50W max.


Dimensions:L/W/H: 60.5/60.5/6.5 cmCanopy-L/W/H: 7.5/7.5/2.5 cm

Accessories/Included parts:Electronic ballast (incl.)E-transformer (incl.)Canopy (incl.)Satin finish acrylic pane (incl.)

Note:Lamp can be switched individual-ly.


T5 GRILL QRB Design by CDC 7.51.5 m

12~

230~

Socket/Lamp:G5/T5 energy saver (excl.)2x 24WandGU10/ES111 (excl.)3x 75W max.

Material:Aluminium

Dimensions:L/W/H: 68/22.5/9 cmCanopy-L/W/H: 7.5/7.5/2.5 cm


Note:Lamp can be switched individual-ly.


T5 GRILL ES111 Design by CDC 2.71.5 m230~







Accessories/Included parts:Electronic ballast (incl.)Canopy (incl.)Satin finish acrylic pane (incl.)


T5 GRILL Design by CDC 6.51.5 m230~




Accessories/Included parts:Electronic ballast (incl.)Canopy (incl.)Satin finish acrylic pane (incl.)


PL GRILL Design by CDC 4.31.5 m230~

T5 Grill Unipage 108



Open Grill Wallpage 109


Material:Aluminium




T5 OPEN GRILL Design by CDC 3.01.5 m230~



OPEN GRILL SINGLE Design by CDC 1.71.5 m230~


Material:Aluminium


180°

The lamp part of the pendant lamp Open GrillSingle can be variably rotated 180°in suspendedposition.In suspended position the fitting can be used asuplight, downlight or wall light.


048

Socket/Lamp:GU5.3/MR16 (excl.)4x 50W max.

Material:Aluminium


Accessories/Included parts:E-transformer (incl.)Canopy (incl.)

Note:Dimmable with trailing-edgedimmer.Wall holder see page 053.


AIXLIGHT® LONG MR16 Design by CDC 1.652.5 m

180°

12~

230~

+A


Material:Aluminium


Accessories/Included parts:E-Trafo (incl.)Canopy (incl.)

Note:Dimmable with trailing-edgedimmer.Wall holder see page 053.


AIXLIGHT® SQUARE MR16 Design by CDC 1.822.5 m

180°

12~

230~

+A


Material:Aluminium

Dimensions:L/W/H: 52.5/13/3 cmCanopy-L/W/H: 7.4/4/2.5 cm


Note:Wall holder see page 053.


AIXLIGHT® LONG GU10 Design by CDC 1.542.5 m

180°

+A230~


Material:Aluminium





AIXLIGHT® SQUARE GU10 Design by CDC 1.32.5 m

180°

+A230~

Aixlight® wall lampspage 155

GU10 energy saving lampspage 675


Socket/Lamp:GU10/ES111 (excl.)2x 75W max.

Material:Aluminium





AIXLIGHT® DUO ES111 Design by CDC 1.52.5 m

180°

+A230~


Material:Aluminium

Dimensions:L/W/H: 44/35.5/10 cmCanopy-L/W/H: 7.4/4/2.5 cm




AIXLIGHT® SQUARE ES111 Design by CDC 2.62.5 m

180°

+A230~





Material:Aluminium



Note:Wall holder. long see page 053.


AIXLIGHT® LONG ES111 Design by CDC 2.62.5 m

180°

+A230~

Socket/Lamp:GX10/Britespot ES111 (excl.)2x 70W

Material:Aluminium

Dimensions:L/W/H: 58/19/9.5 cmCanopy-L/W/H: 7.4/4/2.5 cm


Note:Wall holder. long see page 053.


AIXLIGHT® KARDAFRAME II ES111 BRITESPOT Design by CDC 2.62.5 m

180°230~





Material:Aluminium



Note:Dimmable with trailing-edgedimmer.Wall holder see right.


AIXLIGHT® LONG QRB111 Design by CDC 2.22.5 m

180°

12~

230~

+A


Material:Aluminium



Note:Dimmable with trailing-edgedimmer.Wall holder see right.


AIXLIGHT® SQUARE QRB111 Design by CDC 2.22.5 m

180°

12~

230~

+A


053BASICS | PENDANTS

90°

Dimensions:Base-Ø/H: 3/1.8 cm

Note:Lamp not included.

Versions:silver grey/2 pce. 154322

SUSPENSION for Aixlight® kardaframe elements 0.142.5 m

Dimensions:Total-L: 4.2 cm

Note:Only for Aixlight® KardaframeMR16 and QRB111.Lamp not included.


WALL HOLDER SHORT for Aixlight® kardaframe elements 0.15

90°

Note:Lamp not included.


WALL HOLDER LONG for Aixlight® kardaframe elements 0.24

Dimensions:Total-L: 16 cm



Socket/Lamp:R7s/R7s, 118 mm (excl.)2x 200W max.andGU10/ES111 (excl.)2x 75W max.

Material:Aluminium



Note:Dimmable.


AIXLIGHT® SHOP I Design by CDC 5.02.5 m230~

180°

30°

Socket/Lamp:Rx7s/HQI-TS (excl.)2x 70WandG53/QRB111 (excl.)2x 75W max.

Material:Aluminium


Accessories/Included parts:Electronic ballast (incl.)E-transformer (incl.)Canopy (incl.)


AIXLIGHT® SHOP II Design by CDC 6.02.5 m230~

180°

30°



AIXLIGHT®

PENDANT SYSTEM Design by CDC


1.8 m

1.8 m

Material:Aluminium


Note:The base frame can individuallybe equipped with lamp modu-les. (see page 056-057).Suspension (incl.)


AIXLIGHT® PENDANT SYSTEM 1.1 m base frame 2.5

3.54

Material:Aluminium


Note:The base frame can individuallybe equipped with lamp modu-les. (see page 056-057).Suspension (incl.)


AIXLIGHT® PENDANT SYSTEM 1.6 m base frame




Material:Aluminium

Dimensions:L/W/H: 32/19/8 cmConnection lead-L: 1.8 m


Note:For the application in basicframes of the Aixlight® pendantsystems.


AIXLIGHT® PENDANT SYSTEM QRB module 1.5

60°


Material:Aluminium

Dimensions:L/W/H: 47.5/19/8 cmConnection lead: 1.8 m

Accessories/Included parts:E-Trafo (incl.)

Note:For the application in basicframes of the Aixlight® pendantsystems.


AIXLIGHT® PENDANT SYSTEM 2 QRB module

230~+A

1.85

60°230~

+A



Dimensions:L/W/H: 22.5/22.5/3.5 cm

Note:Box serves as power feed-in aswell as straight. corner and crossconnection of the base frames.

Note:To connect the base frames withthe connection/feed-in box.


AIXLIGHT® PENDANT SYSTEM connection/feed-in box

Material:Metal


Note:max. current: 16AConnection lead (incl.)


AIXLIGHT® PENDANT SYSTEM canopy with feed-in cable

Versions:chrome/2 pce. 154744

AIXLIGHT® PENDANT SYSTEM connection screws set 0.02

Material:Metal

Dimensions:Total-Ø/L: 1.5/2 cm

Socket/Lamp:G12/CDM-T (excl.)70W

Material:Aluminium



Note:For application in the baseframes of the Aixlight® pendantsystem.Emitting angle of the reflector 38°


AIXLIGHT® PENDANT SYSTEM 70W metal halide module 1.97

60°230~

+A

2.0230~

0.67230~




Material:AluminiumOuter shade acrylicInner shade steel/chrome

Dimensions:L/W/H: 79/7/15 cmShade-Ø: 7 cmCanopy-L/W/H: 8/4.5/3 cm


Versions:silver grey/chrome 157062

SEKARA 1.51.5 m230~



Dimensions:L/W/H: 60/9/18 cmCanopy-L/W/H: 8/4.5/3 cm


Versions:silver greyGlass white 157121Glass smoke grey 157122

IGU 3.71.4 m230~

Socket/Lamp:S14d/line lamp (excl.)60W


Dimensions:L/W/H: 53.5/4/14 cmCanopy-L/W/H: 20.5/5.5/3 cm

Accessories/Included parts:Canopy (incl.)2 panes (incl.)

Versions:chromeGlass smoke grey ▼ 157352

NITA Design by CDC 2.551.5 m230~

Socket/Lamp:S14d/line lamp (excl.)2x 60W


Dimensions:L/W/H: 107/4/14 cmCanopy-L/W/H: 8/4.5/3 cm

Accessories/Included parts:Canopy (incl.)2 panes (incl.)

Versions:chromeGlass smoke grey ▼ 157362

NITA DOUBLE Design by CDC 4.61.5 m230~



060

Light Eye Spotpage 091

Light Eye Floorpage 023

Light Eye Move Telescopepage 024




Material:Steel

Dimensions:Ø/H: 14.5/12 cmCanopy-Ø/H: 8.5/2 cm


Note:Light Eye white:Canopy white, clear cable.Light Eye chrome:Canopy chrome, textile blackcable.

Versions:white/chrome 133481chrome 133482

LIGHT EYE 0.61.5 m230~


Material:Steel

Dimensions:Ø/H: 14.5/12 cmCanopy-Ø/H: 8/3 cm


Note:Canopy chrome textile blackcable.Variable emitting angle with thein height adjustable cable ring.


LIGHT EYE X3 1.71.1 m230~


Material:Steel

Dimensions:Ø/H: 13.5/24.5 cmCanopy-Ø/H: 8.2/2 cm


Note:Ovo pendant lamp white:Canopy white, clear cable.Ovo pendant lamp chrome:Canopy chrome, textile blackcable.

Versions:white/chrome 133641

chrome 133642

OVO ES111 0.641.5 m230~

Socket/Lamp:E14/reflector lamp R50 (excl.)40W max.orE14/energy saver (excl.)max. Ø/L: 9/16.5 cm

Material:Steel



Note:Ovo pendant lamp white,Canopy white, clear cable.Ovo pendant lamp. chrome:Canopy chrome, textile blackcable.


chrome 133652

OVO E14 0.641.5 m230~








Note:Canopy chrome, textile blackcable.


LIGHT EYE GLASS Design by CDC 0.81.5 m230~

Socket/Lamp:GX53/GX53 energy saver (excl.)4x 9W max.


Dimensions:L/W/H: 68/15/16.8 cmCanopy-Ø/H: 8.5/2 cm


Note:The two outer balls can be rota-ted 180°.Canopy chrome, textile blackcable.


LIGHT EYE GLASS 4 Design by CDC 3.01.5 m230~

Light Eye Deskpage 023



Socket/Lamp:E27/AGL (excl.)75W max.orE27/energy saver (excl.)Till max. L: 17.5 cm




Note:Canopy chrome, textile blackcable.


BIG LIGHT EYE Design by CDC 2.61.5 m230~

Socket/Lamp:E27/AGL (excl.)2x 40W max.orE27/energy saver (excl.)Till max. Ø/L: 5.2/17.3 cm


Dimensions:Shade-Ø/H: 25.5/14 cmCanopy-Ø/H: 13/2 cm


Note:Canopy chrome, textile blackcable.Glass: outer smooth/inner satinfinish.


HALF BALL LIGHT EYE Design by CDC 2.051.5 m230~



Socket/Lamp:G10q/T8-Ring energy saver (excl.)32W


Dimensions:Ø/H: 45/9 cmCanopy-Ø/H: 13/3 cm

Accessories/Included parts:VVG (incl.)Canopy (incl.)

Versions:alu brushedGlass satin finish 149365

ELSU 3.051.5 m230~



Medo Wallpage 103

Socket/Lamp:2GX13/T5-Ring energy saver (excl.)40W


Dimensions:Ø/H: 38/9.5 cmCanopy-Ø/H: 13/3 cm



MEDO 2.81.5 m230~

Socket/Lamp:G10q/T8-Ring energy saver (excl.)1x 32W1x 40W



Accessories/Included parts:VVG (incl.)Canopy (incl.)

Note:Two T8-ring tubes for a homoge-nous light effect.The tubes can be individuallyswitched.


ISTU 3.21.5 m230~



Socket/Lamp:G10q/T8-Ring energy saver (excl.)40WandGU10/ES111 (excl.)3x 50W max.

Material:PC/Steel



Note:T8-ring tube and ES111 lampare individually switchable via a5-core cable.

Versions:silver grey/white 149190

WHEEL PC Design by CDC 2.81.5 m230~



Socket/Lamp:G10q/T8-Ring energy saver (excl.)40WandGU10/ES111 (excl.)3x 75W max.

Material:Steel

Dimensions:Ø/H: 44/17 cmCanopy-Ø/H: 10.5/5 cm

Accessories/Included parts:Electronic ballast (incl.)Canopy (incl.)Clear plastic ring (incl.)Blue plastic ring (excl.)

Note:T8-ring tube and ES111 lampcan be individually switched viathe included 5-core cable.

T8-ring tube and ES111 lamp can be individuallyswitched via the included 5-core cable.


WHEEL Design by CDC 4.11.9 m230~

Material:Plastic

Dimensions:Inner-Ø: 30 cmOuter-Ø: 44 cm

Versions:blue 149217

WHEEL COLOUR RING BLUE 0.25





Material:Shade PMMACanopy steel

Dimensions:Ø/H: 55/14.5 cmCanopy-Ø/H: 12.5/2.5 cm


Note:Two T8-ring tubes for a homoge-nous light effect.

Versions:white 133721

LIPSY® I Design by CDC 2.61.5 m230~


Material:Shade PMMACanopy steel

Dimensions:Ø/H: 55/29 cmCanopy-Ø/H: 12.5/2.5 cm


Note:Four T8-ring tubes for a homoge-nous light effect.Upper and lower shell can beswitched individually.


LIPSY® II Design by CDC 5.01.5 m230~

Lipsy® Wallpage 104


069BASICS | PENDANTS

Socket/Lamp:2GX13/T5-Ring energy saver (excl.)40Wand3in1 RGB LED SMD Strip (incl.)8.5W


Dimensions:Ø/H: 48/25 cmCanopy-Ø/H: 15/3.5 cm

Accessories/Included parts:Electronic ballast (incl.)LED-converter (incl.)Canopy (incl.)Radio remote control (incl.)

Note:T5-Ring and RGB LED can beindividually switched via the ext-ternal switch.Radio controlled remote controlto change the colours of theRGB LED. 17 programs.Colour selectable.

Versions:chrome/white 147223

Brightness and speed of thecolour change can be controlled.Details (470600) see page 640.

MALANG LED 101.5 m230~

LED

30pce.







Note:The lamp Sun is equipped witha mouth blown glass shade.Every lamp is unique.

Versions:alu/white 133511

SUN PENDANTS 1.01.5 m230~





Note:The lamp Big Sun is equippedwith a mouth blown glass shade.Every lamp is unique.


BIG SUN PENDANTS 1.81.5 m230~

Sun/Big Sun ceiling lamppage 097


071

Socket/Lamp:E27/ELT energy saver (excl.)25W max.Till max. Ø/L: 6.2/17 cm


Dimensions:L/W/H: 25/25/26 cmCanopy-L/W/H: 7/7/7 cm



LALU® pendant lamp Design by CDC 2.352 m230~

Lalu® wall 1/2page 134

Lalu® ceilingpage 096



Socket/Lamp:E27/AGL (excl.)2x 60W max.orE27/energy saver (excl.)2x max. Ø/L: 7/17.5 cm


Dimensions:L/W/H: 37.5/27/26 cmCanopy-L/W/H: 16/8/4.5 cm

Accessories/Included parts:Canopy chrome (incl.)Glass cover (incl.)


TRIBI 4.31.5 m230~



Dimensions:Shade-L/W/H: 23/15/16 cmCanopy-L/W/H: 16/8/3 cm

Accessories/Included parts:Canopy chrome (incl.)


MINI TRIBI 1.71.5 m230~



Dimensions:Shade-L/W/H: 23/15/16 cmCanopy-L/W/H: 65/4/4 cm

Accessories/Included parts:Canopy silver grey (incl.)


MINI TRIBI DOUBLE 3.21.5 m230~



Socket/Lamp:E27/AGL (excl.)60W max.orE27/energy saver (excl.)Till max. L: 15.8 cm





MALANG 2.41.5 m230~

Socket/Lamp:E14/AGL (excl.)3x 40W max.orE14/energy saver (excl.)Till max. Ø/L: 5/12 cm


Dimensions:L/W/H: 121/12.5/20.5 cmShade-L/W: 29.5/12.5 cmCanopy-L/W/H: 65/5/4 cm


Versions:metal brushed 133600

ROVEN 6.51.5 m230~

Malang LEDpage 069

Malang seriespage 014



Perri wall lamppage 134






PERRI pendant lamp 1.01.5 m230~

Socket/Lamp:GU5.3/MR16 (excl.)50W max.


Dimensions:L/W/H: 9/9/8.5 cmShade-L/W/H: 9/9/6 cmCanopy-L/W/H: 8/8/4 cm



BIG BLOX 1.051.5 m

12~

230~





Dimensions:Shade-Ø/H: 9/16.8 cmCanopy-Ø/H: 8.5/2 cm

Accessories/Included parts:Canopy chrome (incl.)


BIG SURA SINGLE 0.51.5 m230~



Dimensions:Shade-Ø/H: 9/16.8 cmCanopy-L/W/H: 64/3.5/3.5 cm

Accessories/Included parts:Canopy silver grey (incl.)


BIG SURA TRIPLE 1.551.5 m230~

Big Sura ceilingpage 099




Material:Bigla clear/white: glassBigla clear/silver grey:glass/aluminium

Dimensions:Shade outer-Ø/H: 13/10 cmShade inner-Ø/H: 9/6.5 cm

Accessories/Included parts:Transformer (excl.)Canopy (excl.)

Note:With open cable end.The inner shade of Bigla clear ismade of glass.The inner shade of the Biglagrey is made of aluminium.

Versions:clear/white 134171

clear/silver grey 134172

BIGLA 0.451.5 m12~

Note:Required accessories for canopy.

Versions:Plastic black 941120Plastic white 941121

Metal silver 941174

STRESS-RELIEF

Material:Steel

Dimensions:Ø/H: 5.4/2 cm

Accessories/Included parts:Stress-relief (excl.)

Versions:chrome 925122silver grey 925124

CANOPY for PENDANTS 0.05

Material:Aluminium

Dimensions:Outer-Ø: 7 cmInstallation-Ø/T: 6/2 cmCentral boring: 1 cm

Accessories/Included parts:Stress-relief (incl.)

Note:For PENDANTS with opencable end.

Versions:white 925321chrome 925322silver grey 925328

PUK RECESSED CANOPY for PENDANTS 0.16.0



Socket/Lamp:E14/AGL candle (excl.)60W max.orE14/energy saver (excl.)Till max. Ø/L: 5/13 cm

Material:Tonga I glassTonga IV ceramic



Note:The lamp Tonga I is equippedwith a mouth blown colouredglass shade.Every lamp is unique wherby theveining can vary.

Versions:Tonga I glassred orange 133441

Tonga IV ceramicwhite 133444

TONGA I/IV 1.01.5 m230~


078

Biba Platepage 099

Biba Bracketpage 091

Socket/Lamp:E14/AGL lamp candle (excl.)60W max.orE14/energy saver (excl.)Till max. Ø/L: 5/13 cm


Dimensions:Ø/H: 13/27 cmCanopy-Ø/H: 8.5/2 cm


Versions:Biba Ichromeglass clear 133452

Biba II + IIIsilver greyGlass clear 133454Glass satin finish 133464

BIBA I–III 0.851.5 m230~

Socket/Lamp:GX53/GX53 (excl.)13W max.




Versions:chrome/clear/satin finish

149380

COMMO 1.151.5 m230~



SATIN CONE SHADE Design by CDC 3.31.3 m230~

Socket/Lamp:E27/AGL (excl.)60W max.orE27/ELT energy saver (excl.)Till max. L: 17.5 cm




Versions:black/chrome 165500

TINTO CONE SHADE Design by CDC 1.731.3 m230~

Socket/Lamp:E27/AGL (excl.)60W max.orE27/ELT energy saver (excl.)Till max. L: 17.5 cm










silver grey 133504

BARRO GLASS Design by CDC 0.71.5 m230~


Material:Aluminium




BARRO Design by CDC 0.61.5 m230~





Material:Aluminium

Dimensions:Ø/H: 11.5/11 cmCanopy-Ø/H: 6.8/5.7 cm

Accessories/Included parts:Canopy (incl.)Deco ring (incl.)


CAI Design by CDC 0.31.4 m230~


Material:Aluminium

Dimensions:W/H/D: 13.5/16.5/13 cmCanopy-Ø/H: 6.8/5.7 cm


Versions:silver grey ▼ 133428

DAVES 111 Design by CDC 0.61.5 m230~



082

DomeLED Wallpage 150

DomeLED Ceilingpage 091


Material:Aluminium

Dimensions:Ø/H: 10.8/12.5 cmCanopy-Ø/H: 8/2.5 cm

Accessories/Included parts:LED convertor (incl.)Canopy (incl.)

Versions:silver greyLED white 147341LED warm white 147342

DomeLED pendant 0.871.8 m

25°mA

350

230~ LED

6 pce.



Socket/Lamp:E27/R80 (excl.)60W max.orE27/LED (excl.)13W

Material:Aluminium



Versions:alu brushed 149385white 149381

ENOLA 0.71.5 m230~

For the Enola pendant we especial-ly recommend the 13W LED E27lamp (550511, 550512)see page 672.



Accessories/Included parts:Set consists of canopy wire sus-pension, plate for Tec II, IV andVI as well as a 2.5 m longcable 3x 0.75mm2

Note:Suspension set to suspend theTec Karda wall lamps(see page 157)

Versions:149150

SUSPENSION SET for TEC I, IV, VI Karda 0.52.5 m

Tec II, IV, VI Kardapage 157




Material:Aluminium

Dimensions:L/W/H: 48/48/40 cmCanopy-L/W/H: 7.5/7.5/2.5 cm



TYRO QUAD Design by CDC 3.31.5 m

12~

230~



Socket/Lamp:E27/AGL. HMLI (excl.)260W max.orE27/energy saver (excl.)

Material:Aluminium


Accessories/Included parts:Canopy (incl.)Chain (incl.)Cable (excl.)

Versions:Outer: silver greyInner: alu natural 165350

Outer: alu naturalInner: alu natural 165358

PARA 380 1.10.9m230~



Socket/Lamp:E27/AGL (excl.)150W max.orE27/energy saver (excl.)

Material:165100: Aluminium/PC165106: Aluminium



Versions:anthracite/transparent 165100

anthracite/silver grey 165106

PARA DOME II E27 1.41.5 m230~

Socket/Lamp:E40/HQI-E (excl.)250W

Material:Aluminium/PC

Dimensions:Ø/H: 48/56 cm

Accessories/Included parts:Conventional ballast (incl.)Canopy (excl.)Chain (excl.)Cable (excl.)


PARA DOME II HQI 250W 6.85230~

Dimensions:Ø: 33 cm

165160

REFLECTOR COVER 330 for Para Dome II E27 HQI 70W and HQI 150W 0.3

Dimensions:Ø: 48 cm

165161

REFLECTOR COVER 480 for Para Dome II HQI 250W 0.75

PC aluminium

Socket/Lamp:E27/HQI-E (excl.)70/150W

Material:165110/165130: Aluminium/PC165116/165136: Aluminium


Weight:165110/165116: 3.55 kg165130/165136: 4.4 kg

Accessories/Included parts:Conventional ballast (incl.)Canopy (incl.)

Versions 70W:anthracite/transparent 165110


Versions 150W:anthracite/transparent 165130


PARA DOME II HQI 70W, 150W 3.55 4.41.5 m230~

PC aluminium

HQI-E lampspage 666




Material:SteelShade acrylic



Versions 70W:silver grey 165300


PARA MULTI 406 VG Design by CDC acrylic-reflector: LexaLite™. USA 5.03 m230~

Socket/Lamp:E27/AGL. HMLI (excl.)160W max.orE27/energy saver (excl.)





PARA MULTI 406 Design by CDC 3.03 m230~

9.83 m230~

acrylic-reflector: LexaLite™. USA



Dimensions:Shade-Ø/H: 54.5/47 cmCanopy-Ø/H: 8.2/2.4 cm




PARA MULTI 536 Design by CDC acrylic-reflector: LexaLite™. USA

Socket/Lamp:Rx7s/HQI-TS;CDM-TS (excl.)150W

Material:Aluminium

Dimensions:Product-Ø/H: 32/10.5 cmCanopy-Ø/H: 32/5.2 cm


Versions:black 165590silver grey 165594

Height adjustable, to semi-flushfitting.

DRUM HQI pendant lamp 3.21.5 m230~


090

WALL & CEILING FITTINGS

DomeLED wallpage 150

DomeLED pendant lamppage 082


091





Versions:chromeGlass clear ▼ 134242

BIBA BRACKET Design by FGL 1.15230~350°

350°


Material:Aluminium/Steel

Dimensions:W/H: 15.5/20 cmHead-Ø: 14.5 cmCanopy-Ø/H: 8/3 cm



LIGHT EYE Design by CDC 0.77230~180°

350°




Accessories/Included parts:Canopy (incl.)Deco ring (incl.)


silver grey 111554

CAI CEILING SPOT Design by CDC 0.37230~


Material:Aluminium

Dimensions:Ø/H: 9.8/11.6 cmCanopy-Ø/H: 8/5.6 cm

Accessories/Included parts:LED converter (incl.)


DomeLED CEILING 0.44

90°

350°

25°mA

350

230~ LED

6 pce.

Light Eye pendantpage 042

Light Eye floorpage 023




092


Material:Aluminium

Dimensions:W/H/D: 15/9/19 cm



KALU 1 Design by CDC 0.512~

230~

350°

90°


Material:Aluminium

Dimensions:W/H/D: 16.5/9.5/19 cm



KALU BRITESPOT ES111 Design by CDC 0.8350°

45°


Material:Aluminium





230~

350°

90°


Material:Aluminium





230~

350°

90°

230~

Kalu Floor Britespot ES111page 023

Application exampleleft: Kalu 1 with dichroic filterright: Kalu Britespot ES111

BASIC PRODUCTS | WALL AND CEILING FITTINGS


BASIC PRODUCTS | WALL AND CEILING FITTINGS 093

Socket/Lamp:GU10/GU10; ES111 (excl.)75W max.

Material:Aluminium


Accessories/Included parts:Deco ring (excl.)

Note:Deco ring for Siena lampsee page 654.


SIENA I 0.3230~340°

90°


Material:Aluminium


Accessories/Included parts:Deco rings (excl.)

Note:Deco ring for Siena lampsee page 654.


SIENA II 0.45230~340°

90°


Material:Aluminium

Dimensions:W/H/D: 11/11/13.5 cm

Versions:alu brushed/chrome 157304

HURIT SINGLE 0.3230~350°

180°

Socket/Lamp:GU10/GU10; ES111 (excl.)2x 75W max.

Material:Aluminium


Versions:alu brushed/chrome 157314

HURIT TWIN 0.45230~350°

180°



BASIC PRODUCTS | WALL AND CEILING FITTINGS094


Material:Aluminium


Accessories/Included parts:Deco ring (incl.)


ASTO 1 0.25230~310°

85°


Material:Aluminium


Accessories/Included parts:Deco rings (incl.)


ASTO 2 0.35230~310°

85°


Material:Aluminium

Dimensions:L/W/H: 45.5/6.5/10 cm



ASTO 3 0.55230~310°

85°


Material:Aluminium




ASTO 4 0.8230~310°

85°




Material:Aluminium

Dimensions:W/H: 7.3/12.5 cmCanopy-Ø/H: 5.4/2 cm

Accessories/Included parts:Transformer (excl.)Canopy (incl.)

Versions:black 132010white 132011silver grey 132014

SPOT 79 12V 0.312~180°

350°


Material:Aluminium

Dimensions:B/H: 9.5/15 cmCanopy-Ø/H: 8.5/2.5 cm



SPOT 79 230V 0.25230~180°

350°


Material:Steel

Dimensions:L/W/H: 8/9/16.5 cmCanopy-Ø/H: 6/2.5 cm


Versions:chrome matt 131108

N-TIC SPOT 230V Design by CDC 0.6230~90°

350°


Material:Aluminium

Dimensions:Ø/H: 6/15.8 cmCanopy-Ø/H: 6/2.5 cm



INDA SPOT GU10 0.3230~180°

350°


Material:Aluminium

Dimensions:W/H/D: 22.5/10/26 cm


LIKA Design by CDC 1.45230~


096

Socket/Lamp:E27/ELT energy saver (excl.)Up to max. Ø/L: 5.2/1725W max.


Dimensions:L/W/H: 25/25/33 cmCanopy-L/W/H: 7/7/7 cm


LALU® CEILING Design by CDC 2.05230~

Lalu® pendantpage 071

Lalu® wall 1/2page 134



Dimensions:Ø/H: 8.7/11.7 cm


TIGLA ROUND 0.32230~





TIGLA SQUARE 0.32230~

Socket/Lamp:E27/ELD energy saver (excl.)Up to max. Ø/L: 6/17 cm15W max.

Material:Steel/PC

Dimensions:Ø/H: 6/23 cmCanopy-Ø: 10 cm


CALMA CEILING Design by CDC 0.58230~ IP21

Socket/Lamp:E27/lamp (excl.)100W max.orE27/energy saver (excl.)

Material:Steel

Dimensions:Ø/H: 6/9.5 cmCanopy-Ø: 10 cm

Note:Not suitable for halogen lamps.


E27 TUBE Design by CDC 0.4230~

Calma IP44page 129



Socket/Lamp:E27/lamp (excl.)75W max.orE27/energy saver (excl.)Up to max. Ø/L: 7/12 cm


Dimensions:Ø/H: 19/19.5 cmCanopy-Ø/H: 11/2 cm


Note:Mouth blown glass shade.Every lamp is unique.


SUN CEILING Design by CDC 1.1230~

Socket/Lamp:E27/lamp (excl.)75W max.orE27/energy saver (excl.)Up to max. Ø/L: 7/17.5 cm




Note:Mouth blown glass shade.Every lamp is unique.


BIG SUN CEILING Design by CDC 1.6230~

Sun/Big Sun pendantpage 070


099

Biba pendantpage 078

Big Sura pendantpage 075

Blox wall lamppage 131

Big Sura wallpage 167

Socket/Lamp:G9/G9 (excl.)40W max.orG9/energy saver (excl.)


Dimensions:Glass-Ø/H: 17/15 cmPlate-Ø: 17.5 cm


Versions:silver greyGlass white 134201

chromeGlass white 134261

ORION PLATE 0.7230~

Socket/Lamp:E14/lamp (excl.)60W max.orE14/energy saver (excl.)Up to max. Ø/L: 5/13 cm


Dimensions:Glass-Ø/H: 13/27 cmPlate-Ø: 17.5 cm


Versions:silver greyGlass clear 134210Glass satin finish 134211

chromeGlass satin finish 134271

BIBA PLATE 0.95230~


Material:Steel/ceramic

Dimensions:Shade-Ø/H: 9/9.5 cmCanopy-Ø/H: 15/1.6 cm



BIG SURA CEILING Design by CDC 0.45230~


Material:Aluminium/Glass

Dimensions:Glass-L/W/H: 6.7/6.7/6.7 cmCanopy-L/B: 9.5/9.5 cmTotal-H: 9 cm


Versions:chromeGlass clear 151240

BLOX 0.55230~




Material:Glass



WAGLAS G9 0.61230~


Material:Glass



WAGLAS GX53 0.61230~

Socket/Lamp:GX53/GX53 energy saver (excl.)9W max.or LED GX53. 1.2Wor PowerLED GX53. 3x 1W

Material:Steel/Glass

Dimensions:Product-Ø/H: 10/7 cmGlass-Ø/H: 10/5 cmCanopy-Ø/H: 8/2 cm


GLAX53 0.33230~




Versions:Glass satin finishsilver grey/white 229912

MICRO FLAT Design by CDC 0.6230~ IP44



Socket/Lamp:E27/ELD energy saver (excl.)Up to max. Ø/L: 4.5/13.5 cm2x 11W

Material:Steel



BANGIS 1.15230~

Socket/Lamp:G24d-3/TC-D energy saver (excl.)2x 26W

Material:Alu/glass


Accessories/Included parts:Ballast (incl.)


TUBE Design by CDC 3.25230~


Material:Aluminium



Versions:white 161431silver grey 161434

PL 2x 26W 2.7230~




Material:PC/Steel




AENEA WALL Design by CDC 1.23230~



Dimensions:Ø/H: 38/9.5 cm


Versions:Glass satin finishalu natural 149252

MEDO 2.5230~

Medopendantpage 065

Socket/Lamp:E14/lamp candle (excl.)3x 40W max.orE14/energy saver (excl.)Up to max. Ø/L: 4.8/9.6 cm



Versions:Glass whitechrome 149352

VESUVIO Design by CDC 1.55230~


Socket/Lamp:E27/lamp (excl.)60W max.orE27/energy saver (excl.)max. Ø/L: 7/16 cm



Versions:Glass satin finishalu brushed 155236

MELAN 1.2230~


Material:SteelShade PMMA



Note:Two T8-ring tubes for a homo-genous light effect.


LIPSY® Design by CDC 2.6230~

Lipsy® pendantpage 068




Socket/Lamp:E27/lamp (excl.)100W max.orE27/energy saver (excl.)Up to max. Ø/L: 4.8/14.8 cm


Dimensions:Ø/H: 45/20 cmGlass-Ø/H: 24/15 cm

Versions:Glass satin finishchrome 157162silver grey 157164

metal brushed 157165

LAMOO Design by CDC 3.05230~




Versions:Glass satin finishchrome 149052metal brushed 149055

LAMOO MINI Design by CDC 0.94230~ IP21





Dimensions:Ø/D: 32/8.5 cmGlass-Ø/D: 32/0.4 cmCanopy-Ø/D: 10/7 cm


Versions:alu brushedGlass satin finish 149401Glass smoke grey 149402

SAINT 22 Design by CDC 1.35230~




Material:Plastic

Dimensions (without lamp):L/W/H: 24/11.5/8 cm



CYCLE 22 Design by CDC 0.43230~


Material:Plastic

Dimensions (without lamp):L/B/T: 25.5/12/6 cm



SAINTURN Design by CDC 0.6230~90°

Material:Aluminium

Dimensions:Outer-Ø: 33 cmInner-Ø: 22.5 cm

Accessories/Included parts:Lamp (excl.)Holder (incl.)

Accessories/Included parts:Cover for indirect light.

Versions:alu 149249

SAINTURN ALU RING 0.12

Material:PC

Dimensions:Outer-Ø: 31.5 cmInner-Ø: 26.5 cm

Accessories/Included parts:Lamp (excl.)Holder (incl.)

Versions:white ▼ 149241blue ▼ 149247

SAINTURN COLOUR FILTER 0.05


108



Dimensions:L/W/H: 60.5/60.5/6.5 cmDistance from wall: 1.6 cm


Versions:silver greyAcrylic glass satin finish 157092

T5 GRILL UNI Design by CDC 6.3230~

T5 Grill pendant lamppage 046


Material:PMMA



Versions:whiteAcrylic glass 157371

NEOPAN 2.7230~

Rear view of the T5 Grill Uniwith coloured T5-lamps(see page 680)



109


Material:Aluminium

Dimensions:L/W/H: 68/68/10 cmProfile: 4.5/4.5 cmCanopy-L/W/H: 5/4.5/3 cm


Note:Canopy on one corner.


OPEN GRILL WALL/CEILING Design by CDC 3.05230~

Open Grill pendant lamppage 047





Note:Glass fastening chrome.

Versions:alu brushed/chromeGlass satin finish 151656

NEODISC 3.6230~








Note:Physical load10 kg max.

Coloured T5-lamps can be used in this fitting.

Flat 221 (157202)

Sedo 21 (151772)

Versions:alu 157202

FLAT 221 5.6230~





NotePhysical load15 kg max.

Versions:alu 157192

FLAT 121 3.2230~

230~



Dimensions:W/H/D: 89.5/4/8.5 cm


Note:Cannot be used as a shelf!For this application we recom-mend the Flat series, see above.


SEDO 21 1.8

230~ 1.3





Note:Cannot be used as a shelf!For this application we recom-mend the Flat series, see above.


SEDO 14



60°LED

2 pce.

Socket/Lamp:G5/T5 energy saver (excl.)2x 21WandPowerLED (incl.)2x 3W

Material:Aluminium


Accessories/Included parts:Electronic ballast (incl.)LED converter (incl.)Switch (incl.)

Note:Wall illumination and LED-spotscan be individually switched.

Versions:alu brushed/naturalLED white 146284LED warm white 146282

TIDUR WALL LAMP 4.75230~

350°

100°



LED

1 pce.

Lamp:PowerLED (incl.)3W

Material:Aluminium

Dimensions:L/W/D: 7/7/15.5 cmCanopy-L/W/D: 7/7/3.5 cm

Accessories/Included parts:LED converter (incl.)Switch (incl.)


STIX 0.35350°

100°60°mA

700

230~








Q-LINE WALL Design by CDC 3.6230~

Q-Line pendant + accessoriespage 032




Note:For the straight connection oftwo Q-Line profiles.

Versions:white/chrome 155051alu natural 155052

Q-LINE CONNECTOR 0.2230~




Note:For a 90° connection of twoQ-Line profiles.


Q-LINE CORNER CONNECTOR 0.3230~

Easy opening with an allen key to replace lamp.



Easy opening with an allen key to replace lamp.

Accessories/Included parts:Electronic ballast (incl.)LED converter (incl.)

Note:Light sources can be individuallyswitched.

Socket/Lamp:G5/T5 energy saver (excl.)35WandLED Strip (incl.)6W



Versions:alu natural/anthraciteLED warm white 155124

Q-LINE UP-DOWN Design by CDC 3.6230~

LED

75 pce.





Dimensions:Outer dimensionsL/W/H: 60/7/7 cmClearance dimensionsL/W/H: 60/3.5/3.5 cm


Note:max. physical load: 3 kg


L-LINE 60 Design by CDC 1.0 IP43



Dimensions:Outer dimensionsW/H/D: 120/7/7 cmClearance dimensionsL/W/H: 120/3.5/3.5 cm


Note:max. physical load: 3 kg


L-LINE 120 Design by CDC 2.3 IP43

230~

230~




Note:Accessories for direct fitting ofDua-T pendant lamp.The set consists of 5 parts.

Versions:alu 157509

CEILING AND WALL FASTENING for Dua-T 0.03

Dua-T pendant lamppage 038




Material:Aluminium


Note:To clip onto the i-Line lamps todirect the light emission.

Versions:alu 157040

i -LINE REFLECTOR 0.05

Material:Acrylic


Note:To be mounted on the i-Line walland pendant lamps.

Versions:white frosted 157031blue frosted ▼ 157037

i -LINE DIFFUSER PANES 1.5


Material:Aluminium


Accessories/Included parts:Electronic ballast (incl.)Panes (excl.)

Note:Diffuser-panes must be orderedseperately.

i -LINE WALL 1.7230~


i-Line pendantpage 042



Sight pendantpage 037




Accessories/Included parts:Electronic ballast (incl.)Switch (incl.)


SIGHT 24 Design by CDC 0.7230~






SIGHT 54 Design by CDC 1.25230~










NEPRO LINE 2.95230~360°





ARLINA T5 3.3230~



Socket/Lamp:S14d/line lamp (excl.)60W

Material:Steel



BOWTOW 1.32230~ IP23



Dimensions:W/H/D: 64.5/4.5/10.5 cm

Accessories/Included parts:Electronic ballast (incl.)2 partial satin finish glass plates(incl.)

Note:Physical load 3 kg max.


BOWTOW GLASS 2.75230~ IP21



Dimensions:W/H/D: 45/9.5/6 cm


ARLINA 1.0230~

Socket/Lamp:R7s/R7s, 118 mm (excl.)200W max.


Dimensions:W/H/D: 23/8.5/8.5 cm

Versions:alu brushed 147566chrome 147562

TANI 0.8230~



Socket/Lamp:G13/LED-T Tube (excl.)6W

Material:Aluminium

Dimensions:Ø/H/T: 6/12/14 cm


Note:Operate only with LED-T Tube!Lamp LED-T tube must be orde-red seperately (see below).Can only be used in verticalapplication as shown in illustra-tion!


LED-T WALL Design by CDC 0.5524=

230~

Socket/Lamp:G13/LED (incl.)6W total

Material:Acrylic


Note:Operate only with LED-T lamps!


LED-T TUBE 0.3824=

30°LED

120 pce.

LED-T pendantpage 041




Material:Aluminium




ONIO T5 Design by CDC 1.0230~


Material:Aluminium



ONIO R7s Design by CDC 0.8230~

Lamp:LED Line (incl.)4.2W

Material:Aluminium




ONIO LED Design by CDC 0.87mA350

230~



Socket/Lamp:S14d/line lamp (excl.)35/60W

Material:Plastic

Dimensions:Socket-W/H/D:4.7/10.2/3.8 cm

Versions:Armature for line lampchrome 160702

LINE Design by CDC 0.1230~

Socket/Lamp:S14d/line lamp (excl.)2x 35/60W

Material:Aluminium


Versions:Armature for line lampchrome 157342

NIABI Design by CDC 0.5230~ IP23

Socket/Lamp:S14d/–35/60W

Dimensions:Ø: 3 cmLength-35W: 30cmLength-60W: 50cm

Versions 35W:2700K matt 590150

Versions 60W:2700K matt 590151

2700K clear 590152

LINE LAMP 230V



IP44

Socket/Lamp:2G11/TC-L energy saver (excl.)24W


Dimensions:Ø/H/D: 6.5/47/9.5 cmGlass-Ø/H: 6.5/29.5 cmCanopy-W/H/D:4.5/16.5/2 cm



DEVIN PL SINGLE 0.98230~

IP44

Socket/Lamp:E14/ELD energy saver (excl.)2x 12W max.Up to max. Ø/L: 4/14 cm


Dimensions:Ø/H/D: 6.5/46.5/9.5 cmGlass-Ø/H: 6.5/16 cmCanopy-W/H/D:4.5/14.5/2 cm


DEVIN DOUBLE 1.23230~



IP44

Socket/Lamp:G23/TC-S energy saver (excl.)11W

Material:Steel/brassShade acrylic

Dimensions:W/H/D: 6/39/9.5 cmShade-Ø/H: 6/24.5 cm



CALMA IP44 0.85230~

Calma ceilingpage 096

Socket/Lamp:G23/TC-S energy saver (excl.)2x 11W




Versions:metal brushedGlass partial satin finish 147455

Z 211 2.0230~



Socket/Lamp:E14/candle lamp (excl.)40W max.orE14/energy saver (excl.)max. Ø/L: 5/9.6 cm



Versions:alu brushedGlass white 147519

DENA I 0.58230~

Socket/Lamp:E14/candle lamp (excl.)2x 40W maxorE14/energy saver (excl.)max. Ø/L: 5/9.6 cm.




DENA II 0.73230~







BLOX I 0.64230~




Versions:alu brushedGlass partial satin finish 147469

KOKO I 0.45230~





KOKO II 0.75230~





BLOX II 1.4230~

Bloxpage 099

IP44




Versions:alu brushedGlass white ▼ 147489

NARA 0.29230~



IP44





ANGENI II 0.37230~



IP21



Dimensions:W/H/D: 23/4/8.5 cmGlass-Ø: 3.5 cm

Versions:chromeGlass partial satin finish 151282

MIBO WALL UP-DOWN Design by FGL 0.4230~



Note:When mounted with the glassshowing downwards the lamp isclassified IP44.

IP44




Versions:alu naturalGlass white ▼ 151452

ONIDA Design by CDC 0.9230~




Versions:alu naturalGlass white, corrugated 151411

PERRI Design by CDC 0.9230~

Socket/Lamp:E27/ELD energy saver (excl.)max. Ø/L: 4.5/17 cm15W max.



Note:When mounted with the bracketat the bottom the lamp is classi-fied IP43.


LALU® WALL 1/2 Design by CDC 1.5230~

IP20/IP44

IP20/IP43


135

Perri pendant lamppage 074

Lalu® pendant lamppage 071

Lalu® ceilingpage 096






Versions:silver greyGlass white satin finish 157181Glass smoke grey 157182

IGU WALL UP-DOWN 0.55230~



IP23

Socket/Lamp:S14d/line lamp (excl.)35/60W

Material:Aluminium

Dimensions:W/H/D: 10/4.4/5.4 cmWall spacing of lamp: 2.5 cm

Accessories/Included parts:Deco glass (excl.)

Note:Deco glass (see below) pleaseorder seperately.


EDGE Design by CDC 0.35230~

Material:Glass

Dimensions:Deco glass small: W/H: 34/9 cmDeco glass big: W/H: 54/9 cm

Weight:Deco glass small: 0.25 kgDeco glass big: 0.45 kg

Note:Deco glass small suitable for35W LampDeco glass big suitable for60W Lamp.

Versions:Deco glass smallGlass white satin finish 160241Glass smoke grey 160242

Deco glass bigGlass white satin finish 160251Glass smoke grey 160252

DECOGLASS SMALL/BIG for wall lamp Edge 0.450.25




Material:Aluminium



chrome 151984

NEPRO WALL 0.6230~

230~


Material:PMMA/aluminium



Versions:Acrylic satin finish 157451

TRANSLUZ SHELL 1.5

230~

Socket/Lamp:Rx7s/HQI-TS; CDM-TS (excl.)70/150W

Material:Steel


Weight:70W version: 2.7 kg150W version: 2.9 kg


Note:Operate only as uplight!

Versions:70Wwhite 150331silver grey 150332

150Wwhite 150631silver grey 150632

SHELL HQI-TS 70/150W Design by CDC 2.92.7



Socket/Lamp:G24d-3/TC-D energy saver (excl.)26W

Material:Aluminium



SOLF Design by FGL 1.55230~



Material:Aluminium



SOLF T5 Design by FGL 2.0230~


Note:Can be mounted with the lightemission upwards or down-wards.






Versions:Structure glass frostedsilver grey 151424

chrome 151422

NEW ANDREAS 0.91230~




Versions:chromeStructure glass frosted 151462

CHROMBO Design by CDC 0.59230~




Material:Aluminium



chrome 151404

ANDREAS Design by CDC 0.7230~




Versions:Glass partial satin finishsilver grey 151405

chrome 151408

ANDREAS CURVE 1.14230~




Material:Aluminium



MINI BEAM Design by CDC 0.2230~





HARI 0.95230~




Material:Aluminium



Versions:alu brushedLED white 149411LED warm white 149412LED blue 149417

HALF PIPE Design by CDC 0.4mA350

230~ LED

3 pce.



Lamp:LED circuit board (incl.)1.8W in total

Material:Aluminium

Dimensions:W/H/D: 22.3/5/1.8 cmConnection lead-L: 2 m

Accessories/Included parts:Conventional transformer (excl.)

Note:Operate only with a conventio-nal transformer.

Versions:alu brushedLED white 230261LED blue ▼ 230267

AITES 20 LED 0.1512~ IP23LED

20 pce.

Lamp:LED circuit board (incl.)1.5W in total

Material:Aluminium

Dimensions:W/H/D: 9/9/1.8 cmConnection lead-L: 2 m


Note:Operate only with a conventio-nal transformer.

Versions:alu brushedLED white 230251

AITES 16 LED 0.112~ IP23LED

16 pce.




Material:Aluminium

Dimensions:L/W/D: 13/13/6.5 cm


Versions:silver greyLED white 152041LED warm white 152042LED yellow ▼ 152044LED blue ▼ 152047

DACU LED Design by CDC 0.35 IP44mA350

230~ LED

2 pce.



25°

Lamp:PowerLED (incl.)6W total




Versions:alu brushedLED white 114561LED warm white 114562

KALUMO 1.03

LED

6 pce.

90°mA

350

230~

350°

25°


Material:Aluminium


Accessories/Included parts:LED converter (excl.)

Note:Can be fitted on a flush-mountedbox with 60 mm hole spacingand 61 mm depth.


RAPILED 0.21

LED

1 pce.700mA

90°




Material:Aluminium



Versions:metal brushedLED white 151351LED warm white 151352LED blue ▼ 151357

AIDAN 0.25mA350

230~


Material:Aluminium



Versions:metal brushedLED white 151361LED warm white 151362

AIDAN UP-DOWN 0.31mA350

230~

20°

20°

LED

1 pce.

LED

2 pce.


Material:Aluminium

Dimensions:W/H/D: 4.7/9/8 cmHead-Ø: 3.5 cm


Versions:silver greyLED white 151291LED warm white 151292LED blue ▼ 151297

chromeLED white 151341LED warm white 151342LED blue ▼ 151347

IVED II Design by CDC 0.3mA350

230~ LED

2 pce.

20°


150

DomeLED ceilingpage 091

DomeLED pendantpage 082

Lamp:PowerLED (incl.)6x 1W max.

Material:Aluminium




DOMELED WALL 0.46mA350

230~ 40°LED

6 pce.

BASIC PRODUCTS


151


Material:Steel

Dimensions:Ø/H/D: 14.5/13/17.5 cmHead-Ø/H: 14.5/13 cmCanopy-W/H/D: 3.5/7/3 cm


LIGHT EYE BALL wall lamp 0.5230~

Light Eye pendantpage 062



Light Eye Ball with DomeLED ES111 lamp.




Material:Aluminium



DAVES 111 WALL Design by CDC 0.6230~+/-45°


Material:Aluminium

Dimensions:Head-Ø/H: 12/6 cm



QRB MESH WALL 0.212~

230~

350°

90°


Material:Aluminium


Accessories/Included parts:Deco rings (excl.)

Note:Deco rings for Ives lampssee page 654.


IVES I Design by CDC/FGL 0.25230~


153

Daves pendantpage 081

Daves Unipage 020




Aixlight®

pendant lampspage 048




Material:Aluminium




AIXLIGHT® KARDAFRAME WALL MR16 Design by CDC 0.412~

230~


Material:Aluminium




AIXLIGHT® KARDAFRAME WALL QRB111 Design by CDC 0.712~

230~


Material:Aluminium

Dimensions:L/W/H: 32.5/20/9.5 cm



AIXLIGHT® KARDAFRAME WALL BRITESPOT ES111 Design by CDC 1.1230~







RETROSIX QRB 1 1.0512~

230~

360° 60°





Versions:alu brushedclear 147582black 147592

RETROSIX QRB 2 2.0412~

230~

360° 60°

Versions:alu brushedclear 147581black 147591




Material:Aluminium



Note:Pendant application withsuspension set (149150) seepage 084.View left: wall mounted


TEC II KARDA 0.8512~

230~ + A


Material:Aluminium



Note:Pendant application withsuspension set (149150) seepage 084.View left: wall mounted


TEC IV KARDA 1.5512~

230~ + A


Material:Aluminium



Note:Pendant application withsuspension set (149150) seepage 084.

TEC VI KARDA 2.312~

230~ + A





Material:Steel




KARDAMOD SURFACE SINGLE QRB Design by CDC 1.82


Material:Steel



KARDAMOD SURFACE DOUBLE ES111 Design by CDC 2.88230~


Material:Steel



KARDAMOD SURFACE SINGLE ES111 Design by CDC 1.58230~


Material:Steel




KARDAMOD SURFACE DOUBLE QRB Design by CDC 2.98


Material:Steel




KARDAMOD SURFACE SINGLE BRITESPOT ES111 Design by CDC 1.82230~

Socket/Lamp:GX10/Britespot ES111 (excl.)2x 70W

Material:Steel




KARDAMOD SURFACE DOUBLE BRITESPOT ES111 Design by CDC 3.15230~

12~

230~

12~

230~




Socket/Lamp:G5.3/MR16 (excl.)2x 50W max.

Material:PMMA



Versions:black/translucent 117202

ACRYLBOX 2 MR16 1.35350°

90°


Material:PMMA




ACRYLBOX 1 MR16 0.73350°

90°


Material:PMMA



ACRYLBOX 2 GU10 0.97230~350°

90°


Material:PMMA



ACRYLBOX 1 GU10 0.6230~350°

90°

12~

230~

12~

230~





Material:PMMA



ACRYLBOX 2 ES111 1.43350°

90°230~


Material:PMMA



ACRYLBOX 1 ES111 0.84350°

90°230~


Material:PMMA




ACRYLBOX 2 QRB111 1.22350°

90°


Material:PMMA




ACRYLBOX 1 QRB111 0.82350°

90°

12~

230~

12~

230~





Material:Aluminium



chrome 151914

BARRO UP-DOWN Design by FGL 0.63230~350°


Material:Aluminium



chrome 116204

BARRO Design by FGL 0.3230~


Material:Aluminium

Dimensions:W/H/D: 8/7/13 cmHead-Ø: 7 cm


ENNA Design by FGL 0.4230~340°

90°


Material:Aluminium

Dimensions:W/H/D: 15.5/7/13 cmHead-Ø: 7 cm


DIO Design by FGL 0.65230~340°

90°



350°

180°




Note:Grid insert is removable.


LIMA Design by CDC/FGL 0.55230~



Dimensions:W/H/D: 7/20.5/10 cmCanopy-W/H/D:5.5/20.5/2.5 cm

Note:Grid insert is removable.


LIMA UP-DOWN Design by CDC 0.9230~



350°


Material:Aluminium



OVA WALL I 0.45230~


Material:Aluminium



OVA WALL II 1.0230~






Versions:silver greyGlass satin finish ▼ 116212

ASTINA 0.3230~




Versions:silver greyGlass satin finishwhite 151901blue ▼ 151907

ASTINA UP-DOWN 0.5230~350°


167

Nondri Easytec® II silver greypage 248

Nondri Linux® silver greypage 268

Big Sura Deskpage 017


Material:Wood/aluminium/ceramic

Dimensions:Head-Ø/H: 6.5/20 cmCanopy-W/H/D:9.5/9.5/2.5 cm

Accessories/Included parts:Switch (incl.)

Note:The wood cover is a naturalproduct, deviations in colour andveining are possible.

Versions:chromeceramic white 151152

SURA WALL I 0.3230~340°

90°



Dimensions:Head-Ø/H: 7.5/20 cmCanopy-W/H/D: 7.5/4/2.5 cm


NONDRI I 0.32230~340°

90°



Dimensions:Head-Ø/H: 9/9.5 cmCanopy-W/H/D: 8/8/2.9 cmWall spacing: 14 cm


BIG SURA WALL 0.6230~



Dimensions:Head-Ø/H: 7.5/20 cmCanopy-W/H/D: 12.5/4/2.5 cm


NONDRI II 0.71230~340°

90°


Material:Wood/aluminium/ceramic

Dimensions:Head-Ø/H: 6.5/20 cmCanopy-W/H/D:15/6.5/2.5 cm

Note:The wood cover is a natural pro-duct, deviations in colour andveining are possible.


SURA WALL II 0.7230~340°

90°


168


Material:AluminiumFront stainless steel 316


Note:IP23 ceiling use only.

Versions:silver grey/stainless steel 111131

QUADRASYL D Design by CDC 0.25IP20/IP23

230~





QUADRA 44D Design by CDC 0.45 IP44230~



Dimensions:W/H/D: 13.5/13.5/11 cmPower cable-L: 1.5 m

Accessories/Included parts:Plug (incl.)


QUADRA 44 WITH BRACKET Design by CDC 0.8 IP44230~350°

GX53 LED Lamppage 674

GX53 Lamppage 675






Application detail:Rear view of the Quadra 44Wall with the fastening points

Note:IP23 only with light emissiondownwards!


QUADRASYL WALL Design by CDC 0.25IP20/IP23

230~




Versions:silver grey/stainless steel

111492

QUADRA 44 WALL Design by CDC 0.45 IP44230~






Versions:silver greyGlass full satin finish 151132

SQUARE DICE I Design by CDC/FGL 0.5230~180°





SQUARE DICE II Design by CDC/FGL 0.7230~180°







SQUARE WALL Design by FGL 0.8230~

Material:Glass


Versions:partial satin finish 924010

SQUARE GLASS




The illustrated colour effect of the lamp SquareDisi originates from a lamp with dicroic colour filtersee page 659.


SQUARE GU10 Design by CDC/FGL 0.32230~

Socket/Lamp:GZ10/GU10; GZ10 (excl.)35W max.



Note:Colour effect with dichroic lamp(application example above)


SQUARE DISI Design by CDC 0.3230~



172172




Versions:silver grey/black 151524

ALTRA DICE I Design by FGL 0.5230~180°





ALTRA DICE II Design by FGL 0.78230~180°



Dimensions:L/W/D: 7/7/10 cm


ALTRA DICE Design by FGL 0.28230~





ALTRA DICE WALL Design by FGL 0.3230~

350°

340°

GU10 energy saving lamppage 675

GU10 LED lamppage 670

The lamps from the Altera Dice series can be equipped with energysaving lamps as well as LED lamps (see application example left).




Material:Aluminium



THEO UP-DOWN Design by CDC 0.7230~




Material:Aluminium



BIG THEO CEILING 0.95230~


Material:Aluminium



BIG THEO WALL 0.75230~


Material:Aluminium



BIG THEO UP-DOWN 1.65230~


Note:Big Theo Ceiling is not suited forthe DomeLED ES111 lamp!




Material:Aluminium

Dimensions:Ø/H/D: 12.5/20.5/13 cm


ROX UP-DOWN 1.2230~


Material:Aluminium

Dimensions:Ø/H/D: 12.5/16.1/13 cm


ROX WALL 0.9230~


Material:Aluminium



ROX CEILING 0.8230~




Long Grill pendantpage 028


Material:Aluminium

Dimensions:L/W/H: 126/23/10.5 cmCanopy-L/W/H:7.5/7.5/2.5 cm


Note:Ceiling lamp with dark-light louvre.suitable for monitor workstations.


LONG GRILL CEILING 5.1230~




Material:Steel



Note:Equipped with a chrome louvreand a polished reflector for adownwards emitted glare freelight.


TRISTAN PL 18W 1.5230~


Material:Steel





TRISTAN T8 18W 2.3230~


Material:Steel







Material:Steel






The fittings from the Tristan seriesare equipped with a chromelouvre and a polished reflectorfor a downwards emitted glarefree light.




Material:Steel luster aluminium



Note:Equipped with a polishedreflector for a downward emittedglare-free light.


TC 218 1.6230~


Material:Steel luster aluminium



Note:Equipped with a polishedreflector for a downward emittedglare-free light.


TC 336 4.1230~


Material:Steel



Note:Indirect light discharge


TC INDI 255 4.65230~



Socket/Lamp:E27/lamp (excl.)60W max.orE27/energy saver (excl.)max. Ø/L: 7/14.3 cm


Dimensions:W/H/D: 27.2/35/13 cmCanopy-Ø: 7.5 cm


COPPA 1.1230~

Socket/Lamp:E27/lamp (excl.)60W max.orE27/energy saver (excl.)Up to max. Ø/L: 7/17.5 cm


Dimensions:H/D: 30/25 cmGlass-W/H: 24/24 cm


RAY 1.0230~

Socket/Lamp:E14/candle lamp (excl.)2x 40W max.orE14/energy saver (excl.)max. Ø/L: 4.8/9.6 cm



Versions:Glass partial satin finish 151644

DANAX 1.8230~

Socket/Lamp:R7s/R7s, 78 mm (excl.)2x 100W max.



Versions:silver greyGlass satin finish 151624

CYLOVA 1.9230~




Versions:silver greyGlass partial satin finish 155204

ZERAN 0.95230~







CREST 1 1.3230~





CREST 2 1.3230~





CREST 3 1.85230~

Socket/Lamp:E27/lamp (excl.)2x 60W max.orE27/energy saver (excl.)max. Ø/L: 4.8/14.8 cm

Material:Glass/steel


Versions:Glass satin finish 155180

GLASSA E27 3.8230~

Socket/Lamp:G24q-3/TC-D energy saver (excl.)2x 26W



Socket/Lamp:Electronic ballast (incl.)


GLASSA TCD 4.05230~






Note:Ballast (incl.)


ZENIT 1.8230~

Socket/Lamp:E14/candle lamp (excl.)2x 40W max.orE14/energy saver (excl.)max. Ø/L: 5/16.5 cm



Versions:whiteGlass satin finish 151635

DARIUS 1.65230~


3PHASE TRACK

Our 3 Phase fittings are compatible with the 3Phase systems of other leading manufacturers.

5-LightingD-HK10-Strom-1.qxp:HK_10.qxd 28.08.2009 14:49 Uhr Seite 186

TRACK SYSTEMS | HV 3PHASE TRACK 187

DomeLED displaypage 321

DomeLED for 3phase HV-track 0.88

LED

6 Pce.


Material:Aluminium/plastic


Note:3Ph adapter (incl.)LED converter (incl.)


mA700

230~

330°

25°


188 TRACK SYSTEMS | HV 3PHASE TRACK

Socket/Lamp:G12/HQI-T; CDM-T (excl.)70W

Material:Aluminium

Dimensions:L/W: 32/16.5 cmHead-Ø/L: 12.5/24 cm

Accessories/Included parts:3Ph adapter (incl.)Conventional ballast (incl.)

Versions:silver greyEmitting angle 15° 153404Emitting angle 60° 153414

whiteEmitting angle 15° 153401Emitting angle 60° 153411

matt-blackEmitting angle 15° 153400Emitting angle 60° 153410

EURO SPOT G12 3.15350°

100°230~

15°/60°



Socket/Lamp:GX12-1/SDW-TG Mini (excl.)100W

Material:Aluminium

Dimensions:L/W: 37.5/15.6 cmHead-Ø/L: 12.5/30.5 cm

Accessories/Included parts:3Ph adapter (incl.)Philips electronic ballast (incl.)

Note:Spot only to be used withPhillips lamp SDW-TG Mini.

Versions:silver greyEmitting angle 38° 153474

whiteEmitting angle 38° 153471

EURO SPOT SDW-TG 1.75350°

90°230~

Socket/Lamp:GU6.5/CMH-TC (excl.)20W

Material:Aluminium

Dimensions:L/W: 26/11.5 cmHead-Ø/L: 8/25 cm

Accessories/Included parts:3Ph adapter (incl.)Electronic ballast (incl.)

Versions:silver greyEmitting angle 12° 153444Emitting angle 60° 153454

whiteEmitting angle 12° 153441Emitting angle 60° 153451

EURO SPOT CMH-TC GU6.5 0.95350°

70°230~

12°/60°

38°

CMH-TC- lamppage 664


TRACK SYSTEMS | HV 3PHASE TRACK190


Material:Aluminium

Dimensions:L/W: 24/16.5 cmHead-Ø/L: 12.5/14.5 cm

Accessories/Included parts:3Ph adapter (incl.)


EURO SPOT ES111 0.87350°

100°230~


Material:Aluminium


Accessories/Included parts:3Ph adapter (incl.)Conventional transformer (incl.)

Versions:white 153431silver grey 153434matt-black 153430

EURO SPOT QRB111 2.3350°

100°

12~

230~

Socket/Lamp:E27/energy saver (excl.)max. Ø/L: 6/17.5 cm

Material:Aluminium




EURO SPOT E27 1.26350°

90°230~

Euro Spot ES111 white andEuro Spot QRB111 silver greywith Power LED QRB lamp warmwhite (550132)



Versions:chrome. 12° 153721chrome. 24° 153722chrome. 38° 153723chrome. 60° 153726



Material:Aluminium


Accessories/Included parts:3Ph adapter (incl.)E-transformer (incl.)Deco ring (incl.)


SLEEK SPOT MR16 0.32355°

45°

12~

230~

Socket/Lamp:GX10/CMH-MR16 (excl.)20W

Material:Aluminium


Accessories/Included parts:3Ph adapter (incl.)Electronic ballast (incl.)Deco ring (incl.)


SLEEK SPOT GX10 0.47355°

45°230~

The power pack in compact format for theSleek Spot GX10.


Material:Aluminium

Dimensions:L/W/H: 24/9.5/19

Accessories/Included parts:3Ph adapter (incl.)Electronic ballast (incl.)Deco ring (incl.)Reflector (excl.)

Note:Reflectors with numerous emittingangles see below.

Versions:black/chrome 153700white 153701silver grey 153704

chrome 153702

CMH SPOT 20W GU6.5 Design by CDC 0.58350°

180°


Material:Aluminium

Dimensions:L/W/H: 24/9.5/19

Accessories/Included parts:3Ph adapter (incl.)Electronic ballast (incl.)Deco ring (incl.)Reflector (excl.)

Note:Reflectors with numerous emittingangles see below.

Versions:black/chrome 153710white 153711silver grey 153714

chrome 153712

CMH SPOT 35W GU6.5 Design by CDC 065350°

180°

Material:Aluminium


REFLECTOR for CMH Spot GU6.5 0.08

230~

230~

CMH MR16 Precise™Constant Color™, GX10, 20W3000K20W 12° 50721020W 25° 50722020W 40° 507240



Socket/Lamp SDL Pro 70:Rx7s/HQI-TS; CDM-TS (excl.)70W

Socket/Lamp SDL Pro150:Rx7s/HQI-TS; CDM-TS (excl.)150W

Material:Aluminium

Dimensions:L/W/H: 30/27/8 cmBracket-H: 16 cm


Versions:SDL Pro 70white 153621silver grey 153624

SDL Pro 150white 153631silver grey 153634

SDL PRO 70/150 Design by CDC 230~360°

180°

1.8

Material:Aluminium



SDL SHUTTERS for SDL 70/150 Design by CDC 0.5

Socket/Lamp SDL 70:Rx7s/HQI-TS; CDM-TS (excl.)70W

Socket/Lamp SDL 150:Rx7s/HQI-TS; CDM-TS (excl.)150W

Material:Aluminium


Weight:SDL 70: 4.15 kgSDL 150: 5 kg

Accessories/Included parts:3Ph adapter (incl.)Conventional ballast (incl.)

Versions:SDL 70white 150551silver grey 150552

SDL 150white 150561silver grey 150562

SDL 70/150 Design by CDC 230~350°

120°

4.15 5



Socket/Lamp:Rx7s/HQI-TS; CDM-TS (excl.)70W

Material:Steel


Accessories/Included parts:Conventional ballast (incl.)

Versions:3Ph adapter (incl.)white 150321silver grey 150322

Bracket. open cable endswhite 150301silver grey 150302

Ceiling canopy (incl.)white 150311silver grey 150312

HQI-TS FLOOD 70 3.5230~350°

90°


Material:Steel


Accessories/Included parts:Conventional ballast (incl.)

Versions:3Ph adapter (incl.)white 150621silver grey 150622

Bracket. open cable endswhite 150601silver grey 150602

Ceiling canopy (incl.)white 150611silver grey 150612

HQI-TS FLOOD 150 4.5230~350°

90°

HQI-TS Flood 70 (150321)incl. 3PH adapter

HQI-TS Flood 70 (150302)without 3PH adapter, with plug,open cable ends

HQI-TS Flood 70 (150312)incl. ceiling canopy


Socket/Lamp:2G11/TC-L 2G11 (excl.)2x 24W



Accessories/Included parts:3Ph adapter (incl.)Ballast (incl.)


PL 2/24 SHOP 3.0230~350°

180°


Material:Steel

Dimensions:L/W/H:17/15.5/5 cm



SKELETTO 0.48230~350°

180°




Accessories/Included parts:3Ph adapter (incl.)Shutters (excl.)

Note:The shutters are not includedand must be ordered seperately!


R7s SHOP 1.15

0.15

230~350°

180°

Dimensions:L/W/H: 28.5/26/2 cmDimensions pertain to folded outshutter.


SHUTTERS for R7s Shop



200


Material:Aluminium

Dimensions:Head-Ø: 6 cmTotal-L: 19.5 cm

Accessories/Included parts:3Ph adapter (incl.)E-transformer (incl.)


Q-TECH® SPOT MR16 0.39350°

90°

12~

230~


Material:Aluminium




Q-TECH® SPOT GU10 0.27350°

90°230~


Material:Aluminium

Dimensions:Head-Ø: 12 cmL/W/H: 28/10/23 cm



Q-TECH® SPOT QRB111 HOR 0.72355°

180°

12~

230~

coloured GU10 lampspage 659

coloured MR16 lampspage 658




Material:Aluminium




Q-TECH® SPOT ES111 0.59350°

90°230~


Material:Aluminium

Dimensions:Head-Ø: 12 cmW/H: 30.5/16 cm

Accessories/Included parts:3Ph adapter (incl.)Electronic ballast (incl.)Reflector (excl.)

Note:Reflector see below.

Versions:silver grey/black 153200white 153201silver grey 153204

Q-TECH® G12 HOR 1.2350°

90°230~

Material:Aluminium

Dimensions:Product-Ø: 10.5 cm

Versions:24° 15324144° 15324460° 153246

Q-TECH® REFLECTOR G12 0.01





Material:Aluminium




TEC I QRB 0.7


Material:Aluminium




TEC II QRB 0.9


Material:Aluminium




TEC IV QRB 1.512~

230~

12~

230~

12~

230~



Material:Aluminium




TEC I BRITESPOT ES111 GX10 0.8230~

350°

360°

Socket/Lamp:G24q-3/TC-DE energy saver (excl.)26W





TEC TC-DE 0.9230~




Material:Aluminium




TEC I MR16 0.4512~

230~


Material:Aluminium



TEC II MR16 0.6512~

230~

Socket/Lamp:GX10/CMH-MR16 (excl.)20W/35W

Material:Aluminium



Versions:silver grey/20W 153084silver grey/35W 153094

TEC I GX10 0.64350°

90°230~

coloured MR16 lamppage 658

The power pack in compact format for the Tec I GX10 lamp. CMH MR16 Precise™Constant Color™, GX10, 20W3000K20W 12° 50721020W 25° 50722020W 40° 507240

CMH MR16 Precise™Constant Color™, GX10, 35W3000K35W 12° 50731035W 25° 50732035W 40° 507340

4200K35W 12° 50731135W 25° 50732135W 40° 507341





Material:Aluminium

Dimensions:Ø/L: 9/24 cm



PAR MESH 16 0.11350°

170°230~

Socket/Lamp:E27/PAR20 (excl.)75W max.

Material:Aluminium




PAR MESH 20 0.55350°

170°230~


Material:Aluminium




PAR MESH 30 0.68350°

170°230~





Material:Aluminium




NAVIGATOR® PAR30 0.65230~350°

90°

Socket/Lamp:G8.5/CDM-TC (excl.)70W

Material:Aluminium



NAVIGATOR® G8.5

REFLECTOR for Navigator® G8.5

1.85230~350°

90°

Versions:silver grey12° 15317124° 15317244° 15317460° 153176


Material:Aluminium




NEPRO R7s 0.5230~350°

90°



Dimensions:Flexarm-L: 26.5 cmHead-Ø/H: 3.5/4.5 cmProduct-Ø/H: 3.5/39 cm



PURI GOOSE 0.32230~





Material:Housing plasticTube acrylic

Dimensions:L/W/H: 91/19.5/11.5 cmTube-Ø: 4.3 cm



TWINTUBE for 3phase HV-track 1.45230~350°






SIGHT for 3phase HV-track Design by CDC 1.3230~350°








AERO PAR30 Design by CDC 0.33230~350°

90°


209TRACK SYSTEMS | HV 3PHASE TRACK


Material:Aluminium


Accessories/Included parts:3Ph adapter (incl.)Deco ring (incl.)

Note:Without the deco ring the lampcan also be used in combinationwith DomeLED ES111 lamp.


YOKI ES111 Design by CDC/FGL 0.45230~350°

90°






AERO GU10 Design by CDC 0.13230~350°

90°



Material:Aluminium

Dimensions:W/H: 13/25.5 cm

Accessories/Included parts:3Ph adapter (incl.)Deco ring (excl.)

Note:Deco ring see page 654.


LUNA I 0.4230~350°

320°





Versions:chrome/glass clear ▼ 153132silver grey/glass clear ▼ 153134

BIBA BRACKET ES111 1.15230~350°

350°




Material:Aluminium




BIMA I 0.3230~350°

200°


Material:Aluminium




BIMA II 0.5230~350°

200°


Material:Plastic/glass




SAIL PAR30 0.4230~360°

260°


Material:Steel




LIGHT EYE SPOT for 3phase HV-track 0.55230~350°

90°


Material:Steel



Note:Black fabric cable


LIGHT EYE PENDANT LAMP for 3phase HV-track 0.7230~ 1.5 m





Material:PMMA




ACRYLBOX I QRB111 for 3phase HV-track 1.0


Material:PMMA




ACRYLBOX II QRB111 for 3phase HV-track


Material:PMMA




ACRYLBOX I ES111 for 3phase HV-track


Material:PMMA




ACRYLBOX II ES111 for 3phase HV-track


1.55

1.05230~

1.65230~

12~

230~

12~

230~




Material:Aluminium




KARDATRACK MR16/2 Design by CDC 0.9512~

230~

350°

85°


Material:Aluminium




KARDATRACK MR16/4 Design by CDC 1.7

180°


Material:Aluminium




KARDATRACK GU10/4 Design by CDC 1.8

12~

230~

12~

230~

180°230~


Material:Aluminium




KARDATRACK QRB111/4 Design by CDC 2.6

180°



Eutrac®-SystemThe 5-core Eutrac® surface track consists of an extruded aluminium profile which also functions as earthand two inserted plastic profiles carrying four embedded 2.5 mm² copper conductors. Any given profi-le can be easily cut to length on site. It is not necessary to cut back or bend back the conductors . Thetrack has pre-punched oval holes and may be used within handreach.

Material:Aluminium/Plastic

Dimensions:1m L/W/H: 100/3.6/3.2 cm2m L/W/H: 200/3.6/3.2 cm3m L/W/H: 300/3.6/3.2 cm

Weight:1 m: 1 kg2 m: 2 kg3 m: 3 kg

Versions:black/2 m 145200white/2 m 145201silver anodized/2 m 145202

black/3 m 145300white/3 m 145301silver anodized/3 m 145302

Versions:black/1 m 145100white/1 m 145101silver anodised/1 m 145102

EUTRAC® 3PHASE TRACK 3.02.01.0230~16Amax.

Material:Polyamid 66 (Nylon)


Versions:black 144990white 144991silver 144994

ADAPTER for 3phase HV-track 0.085kgmax.

230~10Amax.




Dimensions:Sleeve-Ø/H: 2/2.5 cmWire thickness: 1.5 mm

Versions:chrome1.5 m 145800

3 m 145810

Note:Height adjustableTo be used with Pendant Clip(145730/1/4) or coupler(145600/1/4).

EUTRAC® WIRE SUSPENSION for 3phase HV-track 0.10.05

Material:Aluminium


Versions:black 145730white 145731

silver grey 145734

Note:For suspension via wire or pen-dant suspension.

EUTRAC® PENDANT CLIP for 3phase HV-track 0.04

Material:Plastic/steel

Dimensions:145720/1/4 Ø/H: 7/63.5 cm145710/1/4 Ø/H: 7/122 cmTube-Ø: 1.3 cm

Note:can be shortened with pendantclip (145730/1/4).

Versions:1.2 mblack 145710white 145711

silver grey 145714

Versions:0.6 mblack 145720white 145721

silver grey 145724

EUTRAC® PENDANT SUSPENSION FIXED for 3phase HV-track 0.491.2 m0.280.6m

1.5 m 3.0m

5.0

3.6

1.9



2

Material:Plastic

Dimensions:L/W/H: 3.6/1.7/3.2 cmvisable L/W/H: 3.6/0.2/3.2


silver grey 145594

EUTRAC® END CAP for 3phase HV-track 0.01


Dimensions:Ø/H: 2.7/4.2 cmvisable Ø/H: 2.7/3.2

Note:Load 10 kg max.

Note:With suspension possibility forwire and pendant suspensionØ13 mm.


EUTRAC® MECHANICAL UNIVERSAL ADAPTER for 3phase HV-track 0.05

230~ 0.95

Material:Plastic

Dimensions:L/W/H: 11.2/3.6/3.2 cmvisable L/W/H: 6.8/3.6/3.2

Versions:Feed-in 1 earth leftblack 145510white 145511

silver grey 145514

Versions:Feed-in 2 earth rightblack 145520white 145521

silver grey 145524

EUTRAC® FEED-IN for 3phase HV-track16Amax.

230~ 0.75

Material:Plastic

Dimensions:L/W/H: 13/3.6/3.6 cmvisable L/W/H: 11.2/3.6/0.8

Note:Can be positioned on any partof the track.


silver grey 145534

EUTRAC® MIDDLE FEED-IN for 3phase HV-track16Amax.

230~ 0.24

Material:Plastic


Note:With feed-in possibility


silver grey 145664

EUTRAC® CONNECTOR for 3phase HV-track16Amax.

Material:Aluminium



EUTRAC® COUPLER for 3phase HV-track 0.06

1

6.8

4.43.6

3.2

3.2

1.0

ø2.7

3.2

3.60.2

13

3.6

10

3.6

0.8

17.2

4.4

4.43.6

3.2

1.9



2

2

Note:Inboard for wire and pendantsuspension due to static reasons,coupler is additionaly needed(145600/1/4).

Note:For radius of 30°-330°.With feed-in possibility

230~ 0.03

Material:Plastic



silver grey 145564

EUTRAC® CONNECTOR ELECTRICAL for 3phase HV-track16Amax.

230~ 0.2316Amax.

Material:Plastic

Dimensions:L/W/H: 30.7/3.6/3.2 cmvisable L/W/H: 22/3.6/3.2


EUTRAC® FLEX CONNECTOR for 3phase HV-track

Material:Plastic

Dimensions:L/W/H: 9.6/6.5/9 cmVisable L/W/H: 6.5/6.5/5.5

Note:With feed-in possibility.For the connection of deviceswith safety class I, universallyappliable for device plug safetyclass II. for mains voltage 220-240V with fuse 6.3A.

Versions:black 145700cream white 145701

EUTRAC® OUTLET for 3phase HV-track 0.176.3Amax.

230~

230~ 0.24

Material:Plastic

Dimensions:L/W/H: 15/15/3.2 cmvisable L/W/H: 10.5/10.5/3.2


Versions:Corner connector 1 earth outerblack 145670white 145671

silver grey 145674

Versions:Corner connector 2 earth innerblack 145680white 145681

silver grey 145684

EUTRAC® L-CONNECTOR for 3phase HV-track16Amax.

230~ 0.35

Material:Plastic



Versions:T- connector 1 earth leftblack 145630white 145631

silver grey 145634

Versions:T- connector 2 earth rightblack 145640white 145641

silver grey 145644

EUTRAC® T-CONNECTOR for 3phase HV-track16Amax.

230~ 0.44

Material:Plastic

Dimensions:L/W/H: 26/26/3.2 cmVisable L/W/H: 17.2/17.2/3.2

Note:With feed-in possibility2 power circuits.


silver grey 145694

EUTRAC® X-CONNECTOR for 3phase HV-track16Amax.

1

1

5.8

6.8

3.2

10.5

4.4

4.4

3.2

4.410.5

17.2

17.2

4.4

4.4

6.5

5.5

4.4

3.6

4.4

10.5

4.4

6.8

8.0 -12.0

4.4

1.5

2.6

3.6

3.2


219

1PHASETRACKAll of our 1 phase lamps are compatible to the 1 phase systems of other leading manufacturers.


Material:Aluminium


Accessories/Included parts:1Ph adapter (incl.)E- transformer (incl.)Deco ring (incl.)


SLEEK SPOT MR16 0.32355°

45°


Material:Aluminium


Accessories/Included parts:1Ph adapter (incl.)Electronic ballast (incl.)Deco ring (incl.)


SLEEK SPOT GX10 0.47355°

45°230~


Material:Aluminium


Accessories/Included parts:1Ph adapter (incl.)Electronic ballast (incl.)Deco ring (incl.)Reflector (excl.) available sepe-rately see below.


SLEEK SPOT GU6.5 0.47355°

45°230~

Material:Aluminium


Versions:silver grey/chrome24° 184762silver grey/chrome60° 184766

SLEEK SPOT REFLECTOR, GU6.5 0.06

12~

230~

230~

CMH-TC lamppage 664

CMH-MR16 lamppage 662




Material:Aluminium




TEC I QRB 0.7

350°

360°

12~

230~


Material:Aluminium




TEC II QRB 0.912~

230~


Material:Aluminium




TEC IV QRB 1.512~

230~

Socket/Lamp:G24q-3/TC-DE (excl.)26W





TEC TC-DE 0.9230~




Material:Aluminium




PAR MESH 16 0.33350°

170°230~


Material:Aluminium




PAR MESH 20 0.51350°

170°230~


Material:Aluminium




PAR MESH 30 0.69350°

170°230~


coloured MR16 lamppage 658

222


Material:Aluminium


Accessories/Included parts:1Ph adapter (incl.)E-transformer incl.


Q-TECH® SPOT MR16 0.39350°

90°

12~

230~

coloured GU10 lamppage 659



Material:Aluminium




Q-TECH® SPOT ES111 0.59350°

90°230~




Dimensions:L/W: 10.5/15.5 cm



BLOX 0.5230~350°

90°



Material:Glass



Versions:silver greyGlass partial satin finish 143372

TOBU 0.2230~350°

180°


Material:Aluminium

Dimensions:W/H: 7/22 cmHead-Ø/H: 6/8 cm



BIMA I 0.2230~350°

200°


Material:Aluminium




BIMA II 0.5230~350°

200°


Material:Aluminium




Q-TECH® SPOT GU10 0.27350°

90°230~


Material:Aluminium/Plastic




AERO GU10 Design by CDC 0.13230~350°

90°




Material:Aluminium

Dimensions:B/H/D: 7.5/21/4 cm

Accessories/Included parts:1Ph adapter (incl.)Deco ring (excl.)



LUNA I 0.4230~350°

320°

270°

90°


Material:Aluminium

Dimensions:Head-Ø/H: 12.7/18 cm



KASPO ES111 0.37230~



Dimensions:Flexarm-L: 26.5 cmHead-Ø/H: 3.5/4.5 cmProduct-Ø/H: 3.5/36 cm



PURI GOOSE 0.31230~


350°

180°


Material:Aluminium

Dimensions:B/H/D: 7/31.5/8.5 cmHead-Ø: 5.5 cm



KASPO 0.15230~




Material:Aluminium



Note:Deco ring for the GU10 lamp isincluded.


PURI 0.16230~270°

90°

The Puri fixture can be equipped with either GU10 orES111 lamps.



Socket/Lamp:E14/AGL (excl.)60W max.orE14/energy saver (excl.)max. Ø/L: 5/13 cm

Material:Ceramic



Versions:Shade white 143594

TONGA IV 0.16230~


Material:Housing plasticTube acrylic

Dimensions:L/W/H: 91/19.5/10 cmTube-Ø: 4.3 cm



TWINTUBE 0.85230~350°

Socket/Lamp:GX53/GX53 energy saver(excl.) 9W max.

Material:Plastic


Note:Compact completion for a varietyof application possibilities.


GX53-ADAPTER for 1phase HV-track 0.1230~

1.5 m



Material:Aluminium

Dimensions:Product-Ø: 10.5 cm

Versions:24° 15324144° 15324460° 153246

Q-TECH® REFLECTOR G12 0.01


Material:Aluminium




AERO PAR30 Design by CDC 0.33230~350°

90°


Material:Aluminium




NAVIGATOR® PAR30 Design by FGL 0.65230~360°

90°


Material:Steel

Dimensions:L/W/H:17/15.5/5 cm



SKELETTO 0.46230~350°

180°


Material:Aluminium

Dimensions:Head-Ø: 12 cmB/H: 30.5/16 cm


Note:Suitable reflector see below.


Q-TECH® SPOT G12 HOR 1.2350°

90°230~



3.4 cm

1.8

cm

Material:Aluminium

Dimensions:L/W/H: 200/3.4/1.8 cmCross section: 4 mm2


1PHASE TRACK 2 m 1.34230~10Amax.


Versions:white/2 pce. 143131silver grey/2 pce. 143132

END CAP for 1phase HV-track 0.01

Dimensions:Base-Ø/H: 1.4/2 cm


CEILING SUSPENSION for 1phase HV-track 0.053 m

Dimensions:H/Ø: 2.5/12 cm

Note:For the direct ceiling mounting oflamps with 1 phase adapter.


CANOPY for lamps with 1phase adapter 0.1230~


Dimensions:Ø/H: 20/4.5 cmPower cable-L: 1.5 m

Accessories/Included parts:Foot switch (incl.)Plug (incl.)

Note:May only be used on the powersupply system with mountedlamp.


FLOOR BASE for fittings with 1phase-adapter 0.95230~



1 2

230~ 0.04


Versions:Feed-in 1. earth leftwhite 143031silver grey 143032

Versions:Feed-in 2. earth rightwhite 143041silver grey 143042

FEED-IN for 1phase HV-track10Amax.

230~ 0.05




CONNECTOR WITH FEED-IN POSSIBILITY for 1phase HV-track10Amax.

1 2

1 2

230~ 0.05



Versions:Corner connector 1 earth outerwhite 143051silver grey 143052

Versions:Corner connector 2 earth innerwhite 143061silver grey 143062

CORNER CONNECTOR for 1phase HV-track10Amax.

230~ 0.1



Versions:T-connector 1 earth leftwhite 143071silver grey 143072

Versions:T-connector 2 earth rightwhite 143081silver grey 143082

T-CONNECTOR for 1phase HV-track10Amax.

230~ 0.03


Versions:electricalwhite 143091silver 143092

CONNECTOR for 1phase HV-track10Amax.

230~ 0.1


Note:With feed-in possibilityBending radius of 70°-180°.


FLEX CONNECTOR for 1phase HV-track10Amax.


TRACK SYSTEMS | EASYTEC® II HV-TRACK CHROME/BLACK230



231

EASYTEC® IICHROME/BLACK


Material:Steel

Dimensions:Head-Ø/H: 14.5/14.5 cm

Accessories/Included parts:Easytec® II pendant fittingadapter (incl.)


Versions:chrome/black 185590

LIGHT EYE PENDANT CHROME/BLACK 230~ 1.5 m 0.7

Socket/Lamp:GX53/GX53 Energy Saver (excl.)9W max.



Accessories/Included parts:Easytec® II-pendant fittingadapter (incl.)


Versions:chrome ▼ 185732

LIGHT EYE GLASS 230~ 1.5 m 0.75

Light Eye Glass 4page 062


232



Dimensions:Ø/H: 10/15.5 cmGlass-Ø/H: 10/8.5 cm

Accessories/Included parts:Easytec® II-pendant lampadapter (incl.)

Note:Clear cable.


RONDA PENDANT 230~ 1.5 m 0.22

Light Eye X3pendant lamppage 061

Light Eye Floorpage 023



Material:Steel





LIGHT EYE PENDANT CHROME 230~ 1.5 m 0.7


TRACK SYSTEMS | EASYTEC® II HV-TRACK CHROME/BLACK 233


Material:Aluminium


Accessories/Included parts:Easytec® II-adapter (incl.)Deco ring (incl.)

Note:Without Deco ring suitable forDomeLED ES111 lamps.


YOKI ES111 CHROME Design by CDC/FGL 230~ 0.45350°

90°


Material:Aluminium

Dimensions:Head-L/W/H: 10/11.8/25.5 cmElectronic ballast housing-L/W/H: 16.5/9.5/12 cmCable-L: 20 cm

Accessories/Included parts:Easytec® II-adapter (incl.)EVG (incl.)Deco ring (incl.)


YOKI BRITESPOT ES111 GX10 Design by CDC/FGL 230~ 1.15350°

90°




Material:Steel


Accessories/Included parts:Easytec® II-adapter (incl.)


LIGHT EYE ES111 SPOT CHROME 230~ 0.55

90°

350°


Material:Steel




LIGHT EYE ES111 SPOT CHROME/BLACK 230~ 0.55

90°

350°


Material:Steel

Dimensions:W/H: 10/20 cmHead-Ø: 9 cm



LIGHT EYE GU10 SPOT CHROME 230~ 0.29

90°

350°



Dimensions:Glass-Ø/H: 13/44 cm



BIBA BRACKET 230~ 1.15350°

350°





Note:Deco rings see page 654.

Versions:chrome/black ▼ 185640

ANOKI 230~ 0.22350°

350°


235


Material:Aluminium

Dimensions:W/H: 7.5/23 cmHead-Ø/H: 6/8 cm



BIMA I 230~ 0.3

180°

350°

GU10 Energy saving lampspage 675



Dimensions:Ø/L: 6.9/22.5 cm



WAKI CHROME 230~ 0.41

90°

350°






ANILA CHROME 230~ 0.26

90°

350°


Material:Aluminium

Dimensions:Ø/L/B: 6/8/26.5 cm


Versions:chrome/black ▼ 185700

Q-TECH® SPOT GU10 230~ 0.28

90°

350°


Material:Ceramic




ANABA 230~ 0.28

180°

350°




Material:Aluminium

Dimensions:Ø/L: 6/22.5 cm



ARGON CHROME 230~ 0.31

90°

350°






RAKA SPOT CHROME Design by CDC 230~ 0.4

90°

350°


Material:Aluminium


Accessories/Included parts:Easytec® II-adapter (incl.)Deco ring 51 (incl.)

Note:Additional deco rings on page654.


SIENA CHROME 230~ 0.18

90°

350°



Dimensions:L/W/D: 22/10/12 cmGlass-Ø: 6 cm


Note:Removable grid


LIMA CHROME 230~ 0.3

170°

350°






BLOX CHROME 230~ 0.5

90°

350°



Socket/Lamp:E14/AGL (excl.)60W max.orE14/Energy Saver (excl.)max. Ø/H: 5/13 cm

Material:Glass


Accessories/Included parts:Pendant fitting adapter (incl.)

Versions:chromeGlass satin finished 185521

BIBA III CHROME 230~ 1.5 m 0.85


Material:Glass

Dimensions:Glass-Ø/H: 12.5/9 cm

Accessories/Included parts:Pendant fitting adapter (incl.)


ORION CHROME 230~ 1.5 m 0.45



Dimensions:Ø/L/H: 3.5/22.5/14.5 cm


Versions:chromeGlass partial satin finished ▼

185392

LIGHT TUBE CHROME 230~ 0.38350°

Socket/Lamp:GX53/GX53 Energy Saver (excl.)13W max.or LED GX53. 1.2W (excl.)or PowerLED GX533x 1W (excl.)

Material:Steel

Dimensions:L/B/Ø: 21/10.5/9 cm



GX53 SPOT CHROME 230~ 0.33350°

180°



Material:Aluminium


Accessories/Included parts:Easytec® II-adapter (incl.)E-Trafo (incl.)Deco ring (incl.)


SLEEK SPOT MR16 CHROME 230~ 0.47355°

45°


Material:Aluminium




SLEEK SPOT GX10 CHROME

Material:Aluminium


Versions:silver grey/chrome. 24° 184762silver grey/chrome. 60°184766

SLEEK SPOT REFLECTOR GU6.5 0.06230~

230~ 0.47355°

45°


Material:Aluminium


Accessories/Included parts:Easytec® II-adapter (incl.)EVG (incl.)Deco ring (incl.)Reflectors (excl.)

Note:Suitable reflectors with variousemission angles see below.


SLEEK SPOT GU6.5 CHROME 230~ 0.47355°

45°






SKELETTO CHROME


Material:Aluminium




NEPRO R7s CHROME Design by CDC/FGL 230~ 0.6350°

180°

230~ 0.48350°

180°

239

CMH-TC lamppage 664




Material:Aluminium


Accessories/Included parts:2 end caps chrome (incl.)

Note:Bending machine see right.

Versions:black/1pce. 185020

EASYTEC® II TRACK, BLACK 230~ 1.010Amax.

Dimensions:Base-Ø: 3.5 cm

Versions:10 cmchrome/1 pce. 185042

Versions:Flex adjustable 18-26 cmchrome/1 pce. 185062

CEILING SUSPENSION 10 cm/FLEX for Easytec® II chrome/black 0.1

230~ 0.3

230~ 0.08


END CAP for Easytec® II chrome/black 0.03

Note:Creates 2 sep. circuits


INSULATED CONNECTOR for Easytec® II chrome/black 0.08


CONNECTOR for Easytec® II chrome/black

230~ 0.24


Dimensions:L/W/H: 7.5/7.5/6 cmCable-L: 40 cm


FEED-IN for Easytec® II chrome/black

230~ 0.1

Note:Only for lamps with safetyclass II.Max. load 0.7 kg


PENDANT ADAPTER for Easytec® II chrome/black



FLEX CONNECTOR for Easytec® II chrome/black



Dimensions:for radius-Ø: > 50 cm

Versions:184000

BENDING MACHINE 2.9


242 TRACK SYSTEMS | EASYTEC® II HV-TRACK SILVER GREY


243


Material:Aluminium

Dimensions:Head -L/W/H:10/11.8/25.5 cmElectronic ballast housing -L/W/H: 16.5/9.5/12 cmCable - L: 20 cm



YOKI BRITESPOT ES111 GX10 Design by CDC/FGL 230~ 1.15350°

90°


Material:Aluminium/Ceramic




Versions:silver grey/white ▼ 184641

ANOKI 230~ 0.22350°

350°


Material:Aluminium


Accessories/Included parts:Easytec® II-adapter (incl.)Deco ring (incl.)

Note:without Deco ring suitable forDomeLED ES111 lamp.


YOKI ES111 Design by CDC/FGL 230~ 0.45350°

90°


TRACK SYSTEMS | EASYTEC® II HV-TRACK SILVER GREY

EASYTEC® IISILVER GREY


CMH-TC lamppage 664



Material:Aluminium


Accessories/Included parts:Easytec® II-adapter (incl.)E-transformer (incl.)Deco ring (incl.)


SLEEK SPOT MR16


Material:Aluminium


Accessories/Included parts:Easytec® II-adapter (incl.)Electronic ballast (incl.)Deco ring (incl.)Suitable reflector (excl.)with various emitting angles seebelow.


SLEEK SPOT GU6.5 230~ 0.47355°

45°


Material:Aluminium


Accessories/Included parts:Easytec® II-adapter (incl.)Electronic ballast (incl.)Deco ring (incl.)


SLEEK SPOT GX10

Material:Aluminium


Versions:silver grey/chrome, 24° 184762silver grey/chrome, 60°184766

SLEEK SPOT REFLECTOR GU6.5 0.06

230~ 0.47355°

45°

0.47355°

45°

244

12~

230~


TRACK SYSTEMS | EASYTEC® II HV-TRACK SILVER GREY 245






SAIL R7s Design by CDC/FGL 230~ 0.7350°



Dimensions:Ø/L/H: 3.5/22.5/14.5 cm


Versions:silver greyGlass partial satin finished

184392

LIGHT TUBE 230~ 0.35350°


Material:Aluminium




NEPRO R7s 230~ 0.8

180°

350°


Material:Aluminium




SKELETTO 230~ 0.48

180°

350°








WAKI 230~ 0.41

90°

350°






ANILA 230~ 0.26

180°

350°






BLOX 230~ 0.5

90°

350°


Material:Aluminium

Dimensions:L/W/H: 22/10/12 cmGlass-Ø: 6 cm


Note:Removable grid.


LIMA 230~ 0.3

170°

350°







NONDRI 230~ 0.31350°

90°

248






YANTI 230~ 0.28350°

90°






SWIFTEC Design by CDC/FGL 230~ 0.34






ANABA 230~ 0.28

180°

350°






KANO 230~ 0.34

90°

350°





Material:Aluminium




ARGON 230~ 0.31

90°

350°


Material:AluminiumKappe Kunststoff




LIKA Design by CDC 230~ 0.28350°


Material:Aluminium

Dimensions:W/H: 7.5/23 cmHead-Ø/H: 6/8 cm



BIMA I 230~ 0.3

180°

350°


Material:Aluminium




BIMA II 230~ 0.5

200°

340°


Material:Aluminium




BARRO SPOT Design by CDC/FGL 230~ 0.5

350°

350°







RAKA SPOT Design by CDC 230~ 0.29

90°

350°


Material:Steel

Dimensions:W/H: 10/20 cmHead-Ø: 9 cm



LIGHT EYE SPOT GU10 230~ 0.29

90°

350°


Material:Aluminium




IVES 230~ 0.3

TRACK SYSTEMS | EASYTEC® II HV-TRACK SILVER GREY250


Material:Aluminium

Dimensions:Ø/L/W: 6.6/22.5/8 cm


Note:Shade chrome


SATELLITE® 230~ 0.25350°

90°




Material:Aluminium


Accessories/Included parts:Easytec® II-adapter (incl.)Deco ring 51 (incl.)

Note:Further Deco rings see page654.


SIENA 230~ 0.18

90°

350°


Material:Aluminium


Accessories/Included parts:Easytec® II-adapter (incl.)Deco ring chrome (incl.)


NOON 230~ 0.33

90°

350°



Socket/Lamp:GX53/GX53 energy saver (excl.)13W max.or LED GX53. 1.2W (excl.)or PowerLED GX533x 1W (excl.)

Material:Steel

Dimensions:L/W/Ø: 21/10.5/9 cm


GX53 SPOT 230~ 0.33350°

180°


The GX53 Spot can be opera-ted with energy saving or LEDlamps see pages 674-675.


253


Material:Glass


Accessories/Included parts:Easytec® II-pendant fitting adap-ter (incl.)

Versions:Glass satin finished 184372

SWIFTEC 230~ 1.5 m 0.4


Material:Aluminium/Ceramic




DINA Z Design by CDC 230~ 1.5 m 0.5


Material:Aluminium




BARRO PENDANT Design by CDC 230~ 1.5 m 0.54


Material:Aluminium


Accessories/Included parts:pendant fitting adapter (incl.)


DAVES 111 Design by CDC 230~ 1.5 m 0.6



Dimensions:Ø/H: 10/15.5 cmGlass-Ø/H: 10/8.5 cm



RONDA PENDANT 230~ 1.5 m 0.22





Material:Ceramic




DEWI 230~ 1.5 m 0.41


Material:Glass



Versions:Glass white satin finish 184211

Versions:silver grey/glass satin finish184521

ORION 230~ 1.5 m 0.45

Socket/Lamp:E14/AGL (excl.)60W max.orE14/Energy Saver (excl.)max. Ø/H: 5/13 cm

Material:Glass



BIBA III 230~ 1.5 m 0.85

Socket/Lamp:E14/AGL (excl.)60W max.orE14/energy saver (excl.)max. Ø/H: 5/13 cm

Material:Tonga I glassTonga IV ceramic



Note:the illustrated lamp shade fromthe lamp Tonga I is producedfrom a coloured mouth blownglass. Every lamp is uniquewherby the veining can alsovary on each fixture.

Versions:Tonga IGlass red/orange 184531

Tonga IVCeramic white 184534

TONGA I+IV 230~ 1.5 m 1.07


255TRACK SYSTEMS | EASYTEC® II HV-TRACK SILVER GREY


TRACK SYSTEMS | EASYTEC® II HV-TRACK SILVER GREY256

Material:Aluminium


Accessories/Included parts:2 end caps silver grey (incl.)

Note:Bending machine see right.

Versions:silver grey/1pce. 184022

EASYTEC® II TRACK SILVER GREY 230~ 1.010Amax.

230~ 0.3

230~ 0.08


END CAPS for Easytec® II silver grey 0.03



INSULATED CONNECTOR for Easytec® II silver grey 0.08


CONNECTOR for Easytec® II silver grey

230~ 0.24


Dimensions:L/W/H: 7.5/7.5/6 cmCable-L: 40 cm


FEED-IN for Easytec® II silver grey



FLEX CONNECTOR for Easytec® II silver grey



Pendant fitting adapter:Simple shortening of thependant length.

Dimensions:for radius-Ø: > 50 cm

Versions:184000

BENDING MACHINE 2.9

Dimensions:L/W/H: 27/2.5/7 cmAdjustable from 15.5-24 cmCable length: 40 cmBase-Ø: 3.5 cm


FLEXIBLE WALL HOLDER WITH ANCHOR CABLE for Easytec® II silver grey 0.15

Dimensions:Joint: 180°Total-L: 23-31 cmBase-Ø: 3.5 cm

Note:For slanted ceillings.


FLEXIBLE CEILING HOLDER for Easytec® II silver grey 0.1

Dimensions:Base-Ø: 3.5 cm

Versions:10 cmsilver grey/1 pce. 184042

Versions:Flex adjustable 18-26 cmsilver grey/1 pce. 184062

CEILING SUSPENSION 10 cm/FLEX for Easytec® II silver grey 0.1

Dimensions:L: 13 cm

Note:Only suitable for fittings with thesafety class II.Load 0.7 kg max.


PENDANT FITTING ADAPTER for Easytec® II silver grey 0.1230~


TRACK SYSTEMS | LINUX LIGHT® LV-TRACK CHROME 259

LINUX LIGHT®

CHROME

Socket/Lamp:GY6.35/2pin base (excl.)50W max.

Material:Ceramic

Dimensions:Shade-Ø/H: 15/22 cm

Accessories/Included parts:Linux Light®-pendant lamp adap-ter (incl.)


TONGA IV 12~ 1.5 m 1.07




Accessories/Included parts:Linux Light® adapter (incl.)


NONDRI CHROME 12~ 0.22

90°

350°


Material:Glass

Dimensions:Shade-Ø/H: 12.5/9 cm

Accessories/Included parts:Linux Light®-pendant lampadapter (incl.)

Versions:white satin finish 136201

ORION PENDANT 12~ 1.5 m 0.45


Material:Ceramic

Dimensions:Shade-Ø/H: 9/10.5 cm

Accessories/Included parts:Linux Light®-pendant lamp adap-ter (incl.)


DEWI 12~ 1.5 m 0.4


TRACK SYSTEMS | LINUX LIGHT® LV-TRACK CHROME260


Material:Aluminium




QRB SPOT 12~ 0.27

90°

350°

Socket/Lamp:GX5.3/MR16 (excl.)50W max.

Material:Aluminium




LIKA CHROME Design by CDC 12~ 0.12350°



Material:Aluminium




SYROS CHROME 12~ 0.11

90°

350°



Material:Steel

Dimensions:W/H: 10/18.5 cmHead-Ø: 9 cm



LIGHT EYE SPOT MR16 CHROME 12~ 0.26

90°

350°






ANILA CHROME 12~ 0.18

90°

350°


Material:Aluminium




IVES CHROME 12~ 0.15


Material:Aluminium



Note:Operate only with direct mirrorlamps!


ARGON CHROME 12~ 0.27

90°

350°


TRACK SYSTEMS | LINUX LIGHT® LV-TRACK CHROME262

Material:Aluminium


Accessories/Included parts:2 end caps clear (incl.)

Note:Bending machine on page 275.Suitable end caps (138380)see below.


LINUX LIGHT® LV-TRACK CHROME 12~ 0.525Amax.

25Amax.

12~ 0.24

Dimensions:Ø/H: 3.7/2.9 cmCable-L: 60 cm


FEED-IN for Linux Light® chrome

Material:Plastic



Note:Max. track length: 2 m.Suitable ceiling suspension:10 cm (136246).Additional transformers for theLinux Light® LV-track system canbe found on page 647.


SHORTBOX TRANSFORMER 150VA for Linux Light® chrome Design by CDC 0.4512~

230~ 50-150VA

+A

Material:Plastic

Versions:clear/2 pce. 138380

END CAP for Linux Light® chrome 0.02





INSULATED CONNECTOR for Linux Light® chrome 0.06


CONNECTOR for Linux Light® chrome 0.08

Material:Aluminium

Dimensions:Base-Ø: 3 cm

Note:Ceiling suspension 10 cm(136246) is suitable for combi-ned application with the Linux®

Light shortbox transformer(136192).

Versions:chrome6.5 cm/1 pce. 136240

10 cm/1 pce. 136246

CEILING SUSPENSION for Linux Light® chrome 0.07



WIRE SUSPENSION for Linux Light® chrome 0.09

Material:Aluminium

Dimensions:Base-Ø: 3 cmTotal-L: 17.5-26 cm

Note:Not suitable for Linux® shortboxTransformer (136192)!


FLEX SUSPENSION for Linux Light® chrome 0.2

2.5 m

12~25Amax.

0.0612~25Amax.


FLEX CONNECTOR for Linux Light® chrome240°

0.2112~25Amax.

Note:Application in combination withceiling suspension possiblesee page 274.


FLEX CONNECTOR X for Linux Light® chrome >60°

0.1712~25Amax.

Note:Application in combination withceiling suspension possiblesee page 274.


FLEX CONNECETOR Y for Linux Light® chrome >45°


TRACK SYSTEMS | LINUX LIGHT® LV-TRACK SILVER GREY264

LINUX LIGHT®

SILVER GREY


Material:Aluminium



Note:Operate only with direct mirrorlamps.


ARGON 12~ 0.27

90°

350°


Material:Steel

Dimensions:W/H: 10/18.5 cmHead-Ø: 9 cm



LIGHT EYE SPOT MR16 12~ 0.26

90°

350°


Material:Aluminium

Dimensions:L/W/Ø: 22.5/8/6 cm



Q-TECH® SPOT MR16 12~ 0.18

90°

350°


TRACK SYSTEMS | LINUX LIGHT® LV-TRACK SILVER GREY 265




Material:Glass




SAIL 12~ 0.17350°




Material:Aluminium




QRB SPOT 12~ 0.27

90°

350°


Material:Aluminium




LIKA Design by CDC 12~ 0.12350°


Material:Aluminium




IVES 12~ 0.15


Material:Aluminium




SPACE 12~ 0.23

90°

350°

12~ 0.17350°

Socket/Lamp:G4/2pin base (excl.)2x 20W max.


Dimensions:Ø/B/H: 4.3/20/13 cm



LIGHT TUBE Design by CDC







Versions:silver greywhite 138072

NONDRI 12~ 0.22

90°

350°


Material:Ceramic



Versions:silver greywhite 138362

YANTI 12~ 0.21

90°

350°


Material:Ceramic




ANABA 12~ 0.2

180°

350°

Socket/Lamp:G4/2pin base (excl.)20W max.

Material:Glass




MINI PEN Design by CDC 12~ 0.1





Versions:silver greyGlass clear 138174

ANILA 12~ 0.18

90°

350°








STAR 12~ 0.25

90°

350°


Material:Aluminium




SYROS 12~ 0.11

90°

350°






STRATOS 12~ 0.16

90°

350°





Material:Ceramic

Dimensions:Shade-Ø/H: 9/10.5 cm



DEWI 12~ 1.5 m 0.4



Material:Glass


ORION JOJO 12~ 13 m


Material:Glass




ORION PENDANT 12~ 1.5 m 0.45


Material:Ceramic

Dimensions:Shade-Ø/H: 15/22 cm


Versions:Tonga IV white 138144

TONGA IV 12~ 1.5 m 1.07




Material:Glass



Versions:Tonga I red/orange 138141Tonga III white/blue ▼ 138143

TONGA I + III 12~ 1.5 m 0.85

The illustrated Tonga shadesare made of coloured, mouthblown glass. Each lamp isunique whereby the veiningcan vary.




Material:Glass

Dimensions:Head-W/H/D: 6.5/13/6.5 cm


Versions:Cable silverGlass clear 138090

BLOX 12~ 1.5 m 0.5


Material:Glass

Dimensions:Shade clear Ø/H: 13/10 cmShade white Ø/H: 9/6.5 cm


Versions:Glass clear/white 138210

BIGLA CLEAR 12~ 1.5 m 0.45


Material:Glass

Dimensions:Shade blue Ø/H: 13/10 cmShade white Ø/H: 9/6.5 cm


Versions:Glass blue/white 138217

BIGLA. BLUE 12~ 1.5 m 0.45



Dimensions:Shade clear Ø/H: 13/10 cmShade silver grey Ø/H: 9/6.5 cm


Versions:Shade clear/silver 138220

BIGLA. GREY 12~ 1.5 m 0.45



Material:Aluminium

Dimensions:L/W/H: 100/2.3/0.5 cmL/W/H: 200/2.3/0.5 cm

Accessories/Included parts:2 end caps silver grey (incl.)

Note:Bending machine see page 275.

Versions:silver grey/1 m 138221

silver grey/2 m 138222

LINUX LIGHT® TRACK SILVER GREY 12~ 0.525Amax.

Material:Plastic

Versions:silver 138280

END CAPS for Linux Light® silver grey 0.01

25Amax.

12~ 0.24

Dimensions:Ø/H: 3.7/2.9 cmCable-L: 60 cm


FEED-IN for Linux Light® silver grey

Material:Plastic


Accessories/Included parts:E-Trafo (incl.)

Note:Max. track length: 2 m, Suitableceiling suspension: 10cm(138246) see page 275,Additional transformers for theLinux Light® LV-track systems canbe found on page 647.


SHORTBOX TRANSFORMER 150VA for Linux Light® silver grey Design by CDC 0.4512~

230~ 50-150VA

+A+A



Application example:Simple shortening of pendantlength under usage of the pen-dant adapter.



INSULATED CONNECTOR for Linux Light® silver grey 0.06


CONNECTOR for Linux Light® silver grey 0.0812~25Amax.

0.0612~25Amax.


FLEX CONNECTOR for Linux Light® silver grey240°

0.2112~25Amax.

Note:Can be used in combinationwith ceiling suspension.


FLEX CONNECTOR X for Linux Light® silver grey >60°

0.1712~

12~

25Amax.

Note:Can be used in combinationwith ceiling suspension.


FLEX CONNECTOR Y for Linux Light® silver grey >45°

Material:Aluminium

Dimensions:L: 13 cm


PENDANT LAMP ADAPTER for Linux Light® silver grey 0.1

Application example:Flex connector Y and ceilingsuspension Linux Light® tracks.





WIRE SUSPENSION for Linux Light® silver grey 0.09

Material:Aluminium



FLEX SUSPENSION for Linux Light® silver grey 0.2

Material:Aluminium


Note:Ceiling suspension 10 cm(138246) is suitable for the com-bined application with the LinuxLight® shortbox transformer(138192).

Versions:silver grey

11 cm/1 pce. ▼ 138242

21 cm/1 pce. 138262

Versions:silver grey

6.5 cm/1 pce. 138240

10 cm/1 pce. 138246

CEILING SUSPENSION for Linux Light® silver grey 0.12

Material:Aluminium

Dimensions:Base-Ø: 3 cmJoint: 180°Total-L: 20-30 cm

Note:For slanted ceilings


FLEX CEILING HOLDER for Linux Light® silver grey 0.1

2.5 m

Material:Aluminium



WALL HOLDER FLEXIBLE for Linux Light® silver grey 0.12.5 m

Note:for radius-Ø: > 40 cm

Versions:1 pce. 138200

BENDING MACHINE 2.0


TRACK SYSTEMS | C-TRACK® 12V SHELF TRACK SYSTEM276

Socket/Lamp:G5.3/MR11; MR16 (excl.)35W max.



C-TRACK® CARDANIC SPOT 12~ 0.034

180°

180°

Socket/Lamp:G5.3/MR11; MR16 (excl.)35W max.

Material:Aluminium



C-TRACK® DABO SPOT 12~ 0.05

80°

290°


Material:Aluminium/lens PC

Dimensions:Head-Ø: 3.2 cmFlexarm-L: 20 cm


Note:Please pay attention to the mini-mum load when using electronictransformers.


C-TRACK® LED HEAD 1 12~ 0.05

Socket/Lamp:G4/MR11 (excl.)35W max.



C-TRACK® GOOSE SPOT 12~ 0.046

LED

1 pce.

The unique space saving shelf-track system with integrated 12 volt track.

With the available modules. the user can very easily configure and assemble the C-Track®. In no timepresentation areas and illumination are installed in one process. The low voltage technology is up todate and with the usage of normal 12 volt output current completely safe.

Even in the narrowest areas a specific illumination is possible. With a rotation of 90° the C-Track® spot-lights can simply be clipped into any desirable place of the shelf track. Three types of spotlights are avai-lable for the individual light arrangement. They can be equipped with numerous available lamps.

The shelf holders are available in three different options and can be hung into any desirable position onthe C-Track®. With their adjustable clamp range the wooden girders, glass bottom girder and cable bot-tom girders the presentation area can be easily arranged and hereby fitted to the respective product.

Here are just a few possible application areas:

• Shelf with integrated lighting

• Display cabinet lighting

• Mirror lighting

• Indirect lighting

• Illuminated picture holder track

C-TRACK®


Material:Aluminium


Accessories/Included parts:2 end caps (incl.)


TRACK for C-Track® 12~ 0.0520Amax.

TRACK SYSTEMS |C-TRACK® 12V SHELF TRACK SYSTEM278


TRACK SYSTEMS | C-TRACK® 12V SHELF TRACK SYSTEM 279



FEED-IN for C-Track® 12~ 0.01420Amax.



END CAPS for C-Track® 0.01



CONNECTOR for C-Track® 12~ 0.0120Amax.



FASTENING SOCKET WITH FEED-IN for C-Track® 12~ 0.1520Amax.



FLEX CONNECTOR for C-Track® 12~ 0.01420Amax.



CONNECTOR FRONT for C-Track® 12~ 0.00820Amax.



CONNECTOR SIDE for C-Track® 12~ 0.0220Amax.


TRACK SYSTEMS | C-TRACK® 12V SHELF TRACK SYSTEM280

Dimensions:B/H/D: 0.9/1.7/0.9 cm


WALL AND CEILING HOLDER for C-Track® 0.008

Material:Aluminium


Note:For shelves up to 35cm widthand max. 20mm thickness.Mechanical load per shelf10 kg.


SHELF HOLDER LONG for C-Track® 0.168

Material:Aluminium


Note:For shelves up to 20cm widthand max. 20mm thickness.Mechanical load per shelf10 kg.


SHELF HOLDER SHORT for C-Track® 0.124


TRACK SYSTEMS | C-TRACK® 12V SHELF TRACK SYSTEM 281

Application example:

1. C-Track® shelf with integrated illuminationUnder cetain circumstances and compliance to our applicati-on rules a self-supporting construction is possible.

2. C-Track® shelf holder. long with wooden shelf

3. C-Track® track and wire shelf holder with glass plate

Material:Aluminium

Dimensions:Wire-L: 1.2 m

Note:For shelves up to 30 cm widthand max. 6 mm thickness.Max. mechanical load per wire12 kg.


WIRE SHELF HOLDER for C-Track® 0.08

Material:Aluminium


Note:For display case applications60 x 60 cm in connection withC-Track® strut set.Max. mechanical load pershelf: 5 kg.


ANGLE SHELF HOLDER for C-Track® 0.088

Material:Aluminium


Note:For the stabilization of60 x 60 cm display case appli-cations.


STRUT-SET for C-Track® 0.4

1.) 2.) 3.)


TRACK SYSTEMS | GLU-TRAX® 12V LV-TRACK282

GLU-TRAX®

Socket/Lamp:PowerLED (incl.)1W





POWER-LED SPOT for GLU-TRAX® 12~ 0.04

180°

360°

LED

1 pce.

25°



Dimensions (without lamp):W/H/D: 3/3.2/1.5 cm

Note:When operating with halogenlamps, only use direct mirrorlamps up to max. 10W.

Suitable LED MR16 lampssee pages 668-669.

Versions:186054

MR16 SPOT for GLU-TRAX® 12~ 0.02

160°

360°


Material:Steel/plastic

Dimensions (without lamp):W/H/D: 3/3/2.2 cm


ROBOT II adjustable for GLU-TRAX® 12~ 0.02

110°

0°


TRACK SYSTEMS | GLU-TRAX® 12V LV-TRACK 283

MR16 LED lamppage 668-669


TRACK SYSTEMS | GLU-TRAX® 12V LV-TRACK284


285TRACK SYSTEMS | GLU-TRAX® 12V LV-TRACK

Material:Plastic PC


Note:Laying out with double sidedadhesive tape transparent. 9 mm3 m 220000

Versions:transparent 186015

GLU-TRAX® TRACK 12~ 0.220Amax.

Material:Plastic PC


Accessories / Included parts:10 pce. (incl.)

Note:The tape serves as fasteningpossibility on smooth surfaces. E.g.on wood, the clip additionallyneeds to be fastened with ascrew. Hole for screw fastening isavailable.Max. distance per clip: 50 cm.Max. mechanical load: 1 kg.

Versions:clear 186020

GLU-TRAX® MOUNTING CLIPS 0.01

Connector and feed-ingrey/1 pce. 186952

Flexible connectorgrey/1 pce. 186772

FLEXIBLE CONNECTOR AND FEED-IN for GLU-TRAX® 12~20Amax.




SOLO 90° SHORT for GLU-TRAX® 12~ 0.03

90°

350°


Material:Aluminium


Accessories / Included parts:LED converter (incl.)

Note:Focusable with a emitting angleof 15°-30°

Versions:silver greyLED white 186282

FOCU-LED SPOT for GLU-TRAX® 12~ 0.12

200°

350°

LED

1 pce.

15°-30°

MR16 LED lamppage 668-669


TRACK SYSTEMS | CABLINE286

CABLINEDecorative accentuation illumination is easily acheived with this lighting system:

• High lifespan through Xenon and LED approx. 10,000 h• Optional accessories: mounting track and diffuser cap• Quick fastening through simply clipping on the lamp holders• Flexible lead• Straight layout

LED lamp holder (220651) with LED lamp in white(550421), Cabline cable (220601) and track(220631).


TRACK SYSTEMS | CABLINE 287

Dimensions:Cable-L: 10 mW/H: 1.1/0.45 cmCable cross-section: 2.5 mm2

Accessories/Included parts:Transformer (excl.)

Note:Only available in 10 m rolls.

Versions:white 10 m 220601

CABLE for Cabline12~or

24~1.0

16Amax.


Note:12V Xenon-lamp 10W max.

Versions:white/10 pce. 220611

XENON LAMP HOLDER for Cabline12~or

24~0.01

Lamp:Xenon-lamp10W


Versions:EEI=C10 pce.. clear 100lm 591230

XENON LAMP 2800K

Material:Plastic PC


Note:Only for LED-lamps550421/552422

Versions:white/10 pce. 220651

LED LAMP HOLDER for Cabline 12~

12~

0.01

12~ 0.02


Note:Laying out track for the Cablinecable.


End cap:white 220621

LAYING OUT TRACK for Cabline 0.06


Note:Track cover with diffuser for theCabline track.

Versions:220641

TRACK COVER for Cabline 0.16

10000

LED LAMP

Socket/Lamp:SV8.58/Superflux LED0.52W total

Dimensions:L: 4.2 cm

Note:Operate only with conventionaltransformer!Please adhere to the minimumload of the transformer!

Versions:white 550421warm white 550422

60°LED

6 pce.


TRACK SYSTEMS | APOLLO LV-TRACK288

APOLLOSocket/Lamp:GX5.3/MR16 (excl.)35W max.

Dimensions:L: 8 cm


LAMP HOLDER STICK for Apollo LV-track 12~ 0.06

180°

Socket/Lamp:GX5.3/MR16; 2pin base (excl.)35W max.

Versions:black/2 pce. 180080white/2 pce. 180081silver grey/2 pce. 180082

LAMPHOLDER ADJUSTABLE for Apollo LV-track 12~ 0.07

180°

30°


TRACK SYSTEMS | APOLLO LV-TRACK 289

Dimensions:W/H: 1.6/1.2 cm

Material:Aluminium

Versions:1 mblack/2 pce. 180000white/2 pce. 180001alu satin/2 pce. 180002

Versions:2 malu satin finish/1 pce. 180012

APOLLO LV-TRACK 1.512~25Amax.


Versions:black/2 pce. 180050white/2 pce. 180051silver/2 pce. 180052

END CAP for Apollo LV-track 0.03

Note:For the wall holders(180160/180161) a feed-in(180060/180061/180062) isneeded to operate Apollo trans-formers (182150/182151 and182152).

Versions:black/4 pce. 180160white/4 pce. 180161

WALL HOLDER for Apollo LV-track 0.04

0.08

Dimensions:L/W/H: 11/2/1.8 cmCable-L: 60 cm


FEED-IN for Apollo LV-track 12~ 25A

0.04


Versions:black/2 pce. 180040white/2 pce. 180041silver/2 pce. 180042

CONNECTOR for Apollo LV-track 12~ 25A

0.06


Versions:black 180030

white 180031

FLEX CONNECTOR for Apollo LV-track 12~ 25A

0.3150-150

VA

Material:Plastic


Note:Due to interferences. the maxi-mum track length of electronictansformers may not exceed 2m!When using the wall holders(180160/180161) a feed-in(180060. 180061 or 180062) isneeded to operate Apollo trans-formers (182150/182151 and182152).Additional transformers for yourinstallation see page 647.


ELECTRONIC TRACK TRANSFORMER for Apollo LV-track 12~

230~


TRACK SYSTEMS | WAVE LV-STICK SYSTEM290

WAVE


Material:Glass



SAIL GLASS for Wave 12~ 0.12


Material:Aluminium


Versions:Adapter silver greyLamp chrome 138832

SPACE for Wave 12~ 0.29

The following illustrated lamps of the Wave system always includea Wave track adapter

90°

350°


Material:Ceramic

Dimensions:Head-Ø/H: 9/9.5 cm

Note:The pendant length can be shor-tened at the adapter.

Versions:adapter silver greyShade white/chrome 138871

BIG SURA PENDANT for Wave 12~ 0.41.6 m


Material:Glass

Dimensions:Ø/L/H: 4.2/20/10.5 cm


LIGHT TUBE for Wave Design by CDC 12~ 0.25350°


TRACK SYSTEMS | WAVE LV-STICK SYSTEM292

0.32

Dimensions:Ø: 6 mm

Versions:chrome1 set/70 cm 138800

WAVE SYSTEM RODS

0.05 0.02

Connector

Weight:0.05 kg


Angle connector

Weight:0.02 kg


CONNECTOR / ANGLE CONNECTOR for Wave

25Amax.

12~




Versions:chrome/whiteGlass satin finish 138881

STAR for Wave 12~ 0.31

90°

350°


Dimensions:L/H: 7.4/13 cm


SYROS for Wave 12~ 0.12

90°

350°




QRB SPOT for Wave 12~ 0.15

90°

350°


TRACK SYSTEMS | WAVE LV-STICK SYSTEM 293

0.01

Dimensions:For track width 3 cm.


END CAPS for Wave

Material:Steel


Note:Toroidal transformer


ARTE 300 for Wave 3.612~

230~ 300VA 130° C

Material:Steel




TRANSFORMER 100VA for Wave 1.712~

230~ 100VA 115° C

Material:Steel




TRANSFORMER 200VA for Wave 2.612~

230~ 200VA 115° C

0.06

Dimensions:L: 25 cm

Versions:chrome1 set 138808

CABLE FEED-IN for Wave25Amax.

12~

0.04

Dimensions:For track width 3 cm

Versions:chrome85 mm. inner 138804115 mm. outer 138805

90°-ANGLE for Wave25Amax.

12~

0.08

Dimensions:For track width 3 cmBase-Ø: 1 cmLength: adjustable 16-28 cm

Versions:chrome/silver grey 138806

SUSPENSION for Wave


TRACK SYSTEMS | LV-WIRE SYSTEM294

LV-WIRE SYSTEM


Material:Aluminium



SALUNA 12~ 0.1810 350°

90°


Material:Aluminium

Dimensions:Ø/H: 5.5/12.5 cmStick: 25 cm


SALUNA 25 12~ 0.1910 350°

90°



Dimensions:Head-Ø/W/H: 6.5/16.5/12 cm

Note:The pendant length can be shor-tened at the adapter.

Versions:chromeShade white 181242

SURA PENDANT 12~ 0.31.5 m



Dimensions:Head-Ø/W/H: 6.5/16.5/12 cm

Versions:chromeShade white 181232

SURA 12~ 0.2515

15


TRACK SYSTEMS | LV-WIRE SYSTEM 295





COMET 12~ 0.1310


Material:Aluminium

Dimensions:Ø/L/W: 2.5/9/17 cm


SYROS 12~ 0.1815 350°

90°


Dimensions:Sail-L/W: 26/29 cm

Versions:chromeSail white 186451

SAIL LAMP 12~ 0.1513-30


Material:Glass



SAIL 12~ 0.1515


Dimensions:Head-Ø: 14 cm


WIRE LAMP QRB 12~ 0.115.5




QRB SPOT 12~ 0.1515.5

90°

350°


TRACK SYSTEMS | LV-WIRE SYSTEM296

0.1

Note:For the installation of low volta-ge systems. Only available inrolls of 100m!

Weight:4 mm2, 100 m roll 3.25 kg

6 mm2, 100 m roll 6.9 kg

Versions:4 mm2, 100 m rollinsulated 139004

6 mm2, 100 m rollinsulated 139006

LOW VOLTAGE WIRE 12~25Amax.

Note:For low voltage wire.

Versions:chromeAdjustable/2 pce. 181532

WIRE CLAMP

Dimensions:L: 9-12.5 cm


Dimensions:L: 8 cm


STICK 12~ 0.0612

180°

180°


Versions:black/2 pce. 181080

LAMP HOLDER ADJUSTABLE 12~ 0.0712 90°

90°


Dimensions:Stick-L: 21-52 cm


TELESKOP 12~ 0.0810-30


Dimensions:L: 60 cm


WIRE LAMP MR16 12~ 0.0712


TRACK SYSTEMS | LV-WIRE SYSTEM 297

0.02



FEED-IN 12~

0.25



WALL HOLDER SHORT

Dimensions:Base-Ø/L: 5/3 cm

0.32

Note:For low voltage wire.Includes clamping jig.


WALL HOLDER MIDDLE


0.38



DEFLECTOR LONG


0.25

Note:For low voltage wire.With deflector roll.


CEILING DEFLECTOR

Dimensions:Base-Ø/L: 5/16.2 cm

0.25



DEFLECTOR SHORT


0.1



INSULATED CONNECTOR

Dimensions:L: 6 cm

25Amax.


SPECIAL RANGE | LIM® LIGHT IN MOTION298

LIM® LIGHT IN MOTIONExtraordinary atmosphere can be created by colou-red light using a multi-coloured lighting bank andlight modules of the LIM® light systems.Additive colour mixture, with 6 colour fluorescentlamps makes a simulation of various colour situationspossible, from the neutral colour of daylight to anycolour of light. Even the finest pastel shades withexceptional homogenous light distribution are no pro-blem.The LIM® lighting technology offers various applicati-on possibilities to you; in sales in presentation areasthe light attraction with colour-changing ceilings andlight banks provide a special feature. In businessareas you can control the quantity of light and the

colour of light and light balance of whole officewings. In reception or hotel areas, as well as in thecatering trade, you can create a stylish atmospherewith LIM® light elements. In medical practices andhospitals, the LIM® light system makes speciallighting solutions possible; depending upon yourdesire for either more functionality or more atmos-phere.With an RGB masterlight bank a max. of 200 RGBslave light banks can be controlled. With the instal-lation of the light bank, the maximum usage of theelectrical circuit must be adhered to. (per 16ampere electric circuit > 30 RGB slave light banks).

The LIM® RGB control console enables, togetherwith the RGB light banks and/or RGB master lightmodule, the control and calling up of the lightcolour and light level by a key stroke. Also, dyna-mic sequences, with programmable lightscenes arepossible due to selectable pause and change-overtimes. 4 different sequencing programs with 8 lightscenes each are already stored in the system.Further features are: panic circuit, external switchingentry and variable time intervals. It is a straight for-ward system, does not require prior knowledge &easily operated by the end user.

Socket/Lamp:G13/T8 (incl.)1x red, green, blue3x 36W

Material:Steel


Accessories/Included parts:3 Electronic ballast (incl.)

Versions:Master module with integratedsignal converter 1-10V and con-trol panel 158020

Slave module without signalconverter. for control voltage 1-10V

158021

LIM® RGB MASTER LIGHT MODULE 3x 36W Design by CDC 6.6

Multicolour-light modules with particularly homoge-nous light emission for the universal application inlight walls through simple surface fitting and lightingup a diffuser wall mounted at a distance.

Depending on application, this distance can varybetween 20 cm or more.The applied lamps must be from the same manu-facturer and be burned in for 100 hours at full

100% brightness to guarantee an equal colour dis-tribution and quality.A data sheet can be sent on request.

230~

LIM2® controllerpage 638

5-LightingD-HK10-SpezProd.qxp:HK_10.qxd 31.08.2009 9:25 Uhr Seite 298

SPECIAL RANGE | MULTISPOT 1195 299

Lamp:195 colourLED (incl.)63x red. 66x blue. 66x green18W

Material:Plastic/aluminium


Note:28 pre-set colour changing pro-grams (also controllable viaDMX) as well as 20 pre-setcolours; speed of colour chan-ging and brightness are adjusta-ble: stand alone mode; memoryfunction by auto and colourmode; DMX mode controllablevia external DMX controller; con-trollable via four DMX channels;DMX preset mode; master andslave function; XLR plug connec-tion “In” and “Out” to connectseveral fixtures together(Master/Slave)


MULTISPOT 1195 1.5230~

LED

195 pce.


STAGEFACTORYLINE®


SPECIAL RANGE | STAGE FACTORY LINE® 301


Material:Aluminium

Dimensions:L/W/H: 14.7/7.3/7.3 cmConnection lead-L:18 cm


Note:Open cable ends.Accessories see page 305.

Versions:alu 156612

SFL® PAR16 0.15350°

180°

Socket/Lamp:E27/PAR 20 (excl.)50W max.

Material:Aluminium

Dimensions:L/W/H: 16.6/8.2/8.2 cmPower cable-L: 30 cm


Note:Accessories see page 305.

Versions:alu 156622

SFL® PAR20 P 0.3350°

180°


Material:Aluminium




Versions:alu 156632

SFL® PAR20 G 0.3350°

180°


Material:Aluminium

Dimensions:L/W/H: 22/16.2/16.2 cmPower cable-L: 30 cm



Versions:alu 156722

SFL® PAR36 ES111 0.7350°

180°

12~

230~

230~

230~

Socket/Lamp:GX16d/PAR56 (excl.)300W max.

Material:Aluminium

Dimensions:L/W/H: 37/22.8/22.8 cmPower cable-L: 100 cm



Versions:alu 156602

PAR56. 300WNSP 15° 519740MFL 30° 519741

SFL® PAR56 HV 1.4230~350°

180°


Socket/Lamp:RX7s/HQI-TS; CDM-TS (excl.)70W

Material:Aluminium


Accessories/Included parts:Plug (incl.)Conventional ballast (incl.)

Note:Not suitable for colour foils!!Accessories see page 305.

Versions:alu 156682

Halogen metal halide lampHQI-TS 70WWDL 3000K 509070NDL 4200K 509071

SFL® PAR56 TS 70 LONG HV 3.5350°

180°


Material:Aluminium



Note:Lamp is not suitable for colourfoils!!Accessories see page 305.

Versions:alu 156692

Halogen metal halide lampHQI-TS 150WWDL 3000K 509150NDL 4200K 509151

SFL® PAR56 TS 150 LONG HV 4.5350°

180°


Material:Aluminium



Note:Not suitable for colour foils!Accessories see page 305.

Versions:alu 156662

Halogen metal halide lampHQI-T 70WWDL 3000K 507180NDL 4000K 507181

SFL® PAR56 T 70 LONG HV 3.5350°

180°


Material:Aluminium



Note:Not suitable for colour foils andceramic lamps!Accessories see page 305.

Versions:alu 156672

Halogen metal halide lampHQI-T 150WWDL 3000K 507190NDL 4000K 507191

SFL® PAR56 T 150 LONG HV 4.5350°

180°

SPECIAL RANGE | STAGE FACTORY LINE®302

230~

230~

230~

230~


coloured G12 and Rx7s Lamppage 664-665



SPECIAL RANGE | STAGE FACTORY LINE®304


Material:Aluminium

Dimensions:Ø/L: 10/22 cmconnection lead-L: 15 cm

Note:Open cable ends.


PAR16 MESH 0.11350°

180°


Material:Aluminium




PAR20 MESH 0.55350°

180°


Material:Aluminium




PAR30 MESH 0.68350°

180°

230~

230~

230~



Note:For SFL® PAR flood lightsmax. 500W.Not suitable for flood lights withHIT/HIT-TS lamp!

Versions:yellow 156914green 156915red 156916blue 156917orange 156919

SFL® COLOUR FOIL

Material:Aluminium


Note:These shutters are not suitablefor PAR16 Mesh!

Versions:alu 156802

SHUTTERS for SFL® PAR16 0.07

Material:Aluminium


Note:These shutters are not suitablefor PAR16 Mesh!

Versions:alu 156812


Material:Aluminium


Versions:alu 156822


Material:Aluminium


Versions:alu 156832



Dimensions:Clamp range: 3.5 cm max.


SFL® C-HOOK 16/20 for SFL® PAR16/20 0.2

Dimensions:Clamp range: 5 cm max.


SFL® C-HOOK 36-64 for SFL® PAR36/56/64 0.36


DISPLAY ANDSTICK LIGHTS


SPECIAL RANGE | DISPLAY AND STICK LIGHTS 307


Material:Brass/ glass

Dimensions:Glas-Ø: 3.3 cmW/D/H: 22/10/3.3 cmClamp range: 6.5 mm max.


MIBO STRAIGHT 0.35 IP21



Dimensions:Glass-Ø: 3.3 cmW/H/D: 22/13/16 cmClamp range: 6.5 mm max.


MIBO CURVE 0.3 IP21



Dimensions:Head-Ø/L: 4.4/22.4 cmCable-L: approx. 15 cmClamp range: 7.2 mm max.


Versions:chromeGlass white ▼ 146362

KERAFLEX 0.15

230~

230~

12~





Versions:silver greyCeramic white 146221

LAMBAT 0.96350° 90°



Dimensions:L/W/H: 41/11/11 cmCanopy-Ø/D: 8/3 cm


Versions:chromeCeramic white 146302

LAMBAT SHORT 0.56350° 90°

230~

230~


SPECIAL RANGE | DISPLAY AND STICK LIGHTS308

Lamp:LED strip (incl.)2W

Material:Steel

Dimensions:W/H/D: 35/5.5/22 cmCanopy-L/W/H: 17/3/5.5 cmStick-L: 15 cm

Accessories/Included parts:Power supply (incl.)

Note:Sparing illumination of your exhi-bits through UV-free LED light with-out namable heat dissipation.The swivel range detail is appli-cable for the stick and the head!

Versions:chromeLED white 146721LED warm white 146722

antique brassLED white 146731LED warm white 146732

LED PICTURE LIGHT STRIP Design by CDC 0.65

180°

24=

230~

Lamp:LED Line (incl.)2x 4.2W


Dimensions:Head-Ø: 2.5 cmCanopy-W/H/D: 35/4.8/2.7 cmStick-L: 19 cm

Accessories/Included parts:LED converter (incl.)2 Picture hooks (incl.)


LED PICTURE LIGHT Design by CDC 0.65

LEDs

2 pce.

Quick and easy replace-ment of LED strips which areavailable in various colours.See page 614.

mA350

230~ 130°


Material:Steel

Dimensions:W/H/D: 36/5.5/22 cmCanopy-L/W/H: 17/3/5.5 cmStick-L: 13.5 cm


Note:The swivel range detail is appli-cable for the stick and the head!In the long term UV-light candamage your sensitive exhibits.Please pay attention to the notesof the respective lamp manufac-turers.

Versions:chrome 146572antique brass 146573

PICTURE LIGHT 8W 0.7

180°


Material:Steel

Dimensions:W/H/D: 59/5.5/22 cmCanopy-L/W/H: 17/3/5.5 cmStick-L: 13.5 cm


Note:The swivel range detail is appli-cable for the stick and the head!In the long term UV-light candamage your sensitive exhibits.Please pay attention to the notesof the respective lamp manufac-turers.

Versions:chrome 146582antique brass 146583

PICTURE LIGHT 13W 0.85

180°

270°

230~

230~




Material:Aluminium

Dimensions:Head-H/Ø: 3.2/3.5 cmL/W/H: 30/8/5 cmFlexarm-L: 24 cmCanopy-W/H/D: 8/5/3 cm


Note:Individual alignment of the lamphead throught the flex arm.


IVED GOOSE CANOPY Design by CDC 0.25

LED

1 pce.mA

350

230~


Material:Aluminium

Dimensions:Head-H/Ø: 3.2/3.5 cmFlexarm-L: 24 cmBase: 9.5/9.5 cm

Accessories/Included parts:Switch (incl.)LED converter (incl.)Flush mount box for masonryand cavity walls (incl.)



IVED GOOSE FLUSH MOUNT Design by CDC 0.25

LED

1 pce.mA

350

230~

6.8 6.2


Material:Aluminium

Dimensions:Head-H/Ø: 3.2/3.5 cmFlexarm-L: 28.5 cmCanopy-D/Ø: 3/8 cmTotal-L: 40 cm

Accessories/Included parts:Switch (incl.)LED converter (incl.)



IVED GOOSE Design by CDC 0.4

LED

1 pce.mA

350

230~


Material:Aluminium

Dimensions:Head-Ø/H: 2.9/3 cmStick-L: 30 cmCanopy-W/H/D: 8/5/3 cm



silver greyLED white 146564LED warm white 146565

IVED DISPLAY LIGHT Design by CDC/FGL 0.35

350°LED

1 pce.mA

350

230~

350°


Material:Aluminium




IVED LED SPOT 0.045

90°LED

1 pce. 350°350mA

20°

45°

45°

45°

45°




Material:Aluminium

Dimensions:Total-L: 40 cmHead-Ø/L: 3.2/3.5 cmFlexarm-L: 28.5 cmCanopy-Ø/T: 8/3 cm

Accessories/Included parts:Switch (incl.)LED converter (incl.)



DIO FLEX PLATE LED 0.4

LED

1 pce.mA

350

230~



Dimensions:Total-L: 47.8 cmHead-Ø/L: 3.5/6.4 cmFlexarm-L: 34.5 cm

Accessories/Included parts:Switch (incl.)LED converter (incl.)Plug (incl.)


Versions:chrome/whiteLED white 146602LED warm white 146672

DIO FLEX PLUG LED 0.29

LED

1 pce.mA

350

230~



Dimensions:Total-L: 54 cmHead-Ø/H: 8.5/2.8 cmFlexarm-L: 34.5 cm

Accessories/Included parts:Switch (incl.)Plug (incl.)



DIO FLEX PLUG for GX53 0.5



Dimensions:Total-L: 44.5 cmHead-Ø/L: 3.5/3.5 cmFlexarm-L: 34.5 cm

Accessories/Included parts:Switch (incl.)Plug (incl.)



DIO FLEX PLUG for GU10 0.23

45°

20°

230~

230~


Socket/Lamp:GU10/GU10 (excl.)50W max.or ES111. 75W max. (excl.)or PAR20. 75W max. (excl.)

Material:Aluminium/brass

Dimensions:Head-Ø/H: 4.3/24 cmStick-L: approx. 44 cmCable-L: 60 cm

Accessories/Included parts:2 mounting bracket (incl.)


HIBIT Design by FGL 0.3270°

110°


230~





Dimensions:Head-Ø/H: 4.3/10 cmStick-L: approx. 54 cmClamp range: 8 cm max.

Accessories/Included parts:Deco ring (excl.)



FILI with clamp Design by CDC 0.3270°

90°



Dimensions:Head-Ø/H: 4/10 cmStick-L: approx. 53 cmCanopy-L/W/H: 8/4.7/3 cm

Accessories/Included parts:Switch (incl.)Deco ring (excl.)



FILI with canopy Design by CDC 0.3270°

90°

315



230~

230~


316


Material:Aluminium

Dimensions:L/W/H: 40/7/2.5 cmPower cable-L: 1.5 m

Accessories/Included parts:Switch (incl.)Plug (incl.)Deco ring (incl.)

Note:Cable removable for connectionto the wall outlet.Individual alignment of the lamphead throught the flex arm.


NEAT FLEX 0.5


Material:Aluminium


Accessories/Included parts:Deco ring (incl.)

Note:Can be fitted to flush mountboxes with hole spacing 58 mm.Individual alignment of the lamphead throught the flex arm.


NEAT FLEX PLATE 0.256.5 8


Material:Aluminium

Dimensions:L/W/H: 40/7/2.5 cmPower cable-L: 1.8 mClamp range: 1.7-3.6 cm

Accessories/Included parts:Switch in power cable (incl.)Deco ring (incl.)



NEAT FLEX CLAMP 0.5

230~

230~

230~




317

Accessories/Included parts:Connection box (incl.)



Dimensions:Ø/H: 3.5/9 cmconnection lead-L: 30 cmStick-L: approx. 46 cm


DISPLAY ADL 50/GU10 0.3


200°

90°




Dimensions:Ø/H: 3.5/6 cmconnection lead-L: 20 cmStick-L: approx. 37 cm


DISPLAY ADL 50/MR16 0.33350°

90°

Socket/Lamp:GU10/GU10; PAR20 (excl.)50W max.


Dimensions:L/W/H: 6/4/68 cmHead-Ø/L: 4/6 cmStick-L: 50 cmPower cable-L: 1.5 mClamp range: 0.5-4.9 cm



NEAT 0.55350°

90°

230~

12~

230~


318

90°


Socket/Lamp:GX53/GX53 energy saver 9W (incl.)13W max.or LED GX53 1.2W (excl.)or PowerLED GX53.3x 1W (excl.)

Material:Steel

Dimensions:L/W/H: 60/9.5/10.5 cmHead-Ø/H: 9.5/4.5 cmStick-L: 47 cmPower cable-L: 1.5 mClamp range tube: 2-4.5 cmClamp range wall: 1-4 cm

Accessories/Included parts:Switch in power cable (incl.)Clamp (incl.)GX53 9W 2700K (incl.)

Note:Suitable for tube mounting.


DISPLAY GX53 0.51350°

90°

Socket/Lamp:GX53/GX53 energy saver 9W (incl.)13W max.or LED GX53. 1.2W (excl.)or PowerLED GX53.3x 1W (excl.)

Material:Steel

Dimensions:Head-Ø/H: 9.5/4.5 cmL/W/H: 60/9.5/10.5 cmStick-L: 47 cmPower cable-L: 1.5 m

Accessories/Included parts:Plug (incl.)Mounting bracket (incl)GX53 9W 2700K (incl.)

Note:Mounting bracket is fastenedwith a screw.


GX53 CUPBOARD SURFACE MOUNTED LAMP 0.55350°

230~

230~

Socket/Lamp:GX53/GX53 energy saver 9W (incl.)13W max.or LED GX53 1.2W (excl.)or PowerLED GX533x 1W (excl.)

Material:Steel

Dimensions:L/W/H: 50/9/7 cmStick-L: 33 cmConnection lead-L: 1.5 mClamp range: 1.7-3.6 cm

Accessories/Included parts:Switch in power cable (incl.)GX53 9W 2700K (incl.)



GX53 FLEX CLAMP 0.52230~


180°




Dimensions:L/W/H: 53/7.5/12 cmHead-Ø/H: 6/8 cmStick-L: 44 cmClamp range tube: 2-4.5 cmClamp range wall: 1-4 cmPower cable-L: 1.5 m

Accessories/Included parts:Plug (incl.)Clamp (incl.)

Note:Suitable for tube mounting (eg.on strut systems)


BIMA DISPLAY LIGHT 0.51360°

180°



Dimensions:L/W/H: 53/7.5/12 cmHead-Ø/H: 6/8 cmStick-L: 44 cmPower cable-L: 1.5 m

Accessories/Included parts:Plug (incl.)Mounting bracket (incl)

Note:The mounting bracket is fastenedwith a screw.


BIMA CUPBOARD SURFACE MOUNTED LAMP 0.5



Dimensions:Head-Ø/L: 2.5/8 cmPower cable-L:1.5 m primary/1 m secondaryClamp range: 0.5-4.9 cmStick-L: 50 cm

Accessories/Included parts:Plug (incl.)Transformer (incl.)

Note:Connection lead:1m power cable + transformer +1.5m power cable + plug


0.35350°

90°

12~

230~PUR CLAMP

360°

230~

230~


320 SPECIAL RANGE | DISPLAY AND STICK LIGHTS

120°

120°

290°

290°


Material:Aluminium

Dimensions:Head-L/W/H: 11/2.5/1.5 cmCanopy-Ø: 4 cmStick-L: 25 cm

Accessories/Included parts:LED Converter (excl.)

Note:Only suitable for hollow walls,ceilings or plates.With M10x1 threaded tube.Suitable driver see page 643.

Versions:alu anodizedLED white 146701LED warm white 146702

S-MENT LED 0.14

LED

3 pce.350mA

1.5


Material:Aluminium

Dimensions:Head-L/W/H: 11/2.5/1.5 cmStick-L: 50 cm

Accessories/Included parts:Plug (incl.)LED converter (excl.)

Note:Mounting bracket is fastenedwith a screw.Suitable driver see page 643.


S-MENT LED cupboard surface mounted with plug 0.14

LED

3 pce.350mA

4




Material:Aluminium

Dimensions:Product-Ø/L: 13.5/4 cmStick-L: 50 cmConnection lead-L: 150 cmClamp range: 0.5-4.9 cmBallast-L/W/H:14/6.8/3.5 cm

Accessories/Included parts:LED converter (incl.)Plug (incl.)


DomeLED display light 0.44

LED

6 pce.mA

700

230~ 40°



Material:Plastic


Material:Aluminium

Dimensions:Head-L/W/H: 17.5/11/6 cmStick-L: 52 cmClamp range: 1.5-5.5 cmPower cable-L: 1.5 m

Accessories/Included parts:Plug (incl.)Switch (incl.)Tube kit (excl.)


NEPRO DISPLAY Design by CDC/FGL 1.1350°

Note:To easily fasten the NeproDisplay on tubes or struts with adiameter of 3-5 cm.


TUBE KIT for Nepro Display clamp

90°230~




Material:Aluminium

Dimensions:L/W/H: 11/16/77 cmHead- L/W/H: 11/16/11 cmStick-L: 50 cmClamp range: 0.5-4.9 cmPower cable-L: 1.5 m



SKELETTO 0.65350°

200°


Material:Aluminium

Dimensions:Head-L/W/H: 21/7.5/6.5 cmStick-L: 55 cmClamp range: 1.5-6 cmPower cable-L: 1.5 m



SDL DISPLAY Design by CDC 1.1350°

90°

230~

230~

90°


Material:Aluminium

Dimensions:Head-Ø/H: 4/5 cmStick-L: 60 cm

Accessories/Included parts:Electronic ballast (incl.)Deco ring (incl.)


DIFEST 0.65360°


230~


SPECIAL RANGE | BookLED324

Lamp:PowerLED (incl.)3x1WandLED (incl.)0.06WClosed current. 10mA

Material:Aluminium

Dimensions:W/H/D: 8.3/27.3/19 cmBase plate-L/W: 18.8/16.5 cmPower cable-L: 1.8 m

Accessories/Included parts:LED converter (incl.)Power plug (incl.)

Note:Integrated warm white LED lightin closed position.

Versions:silver greyLED warm white 146172

BookLED shelf light 3.17

45°mA

350

230~ LED

4 pce. 350°

90°


SPECIAL RANGE | BookLED 325

The BookLED shelf light offers your library illumination and stableness in one.BookLED can be optionally operated with the head folding out, downwards or upwards.It only takes a few screws to be loosened, to pull the insert out of the housing, which allows it to be turnedaround 180°. Also the base plate offers flexible application possibilities as it can be fastened separately.It can be optionally fastened to protrude either to the left or right.

In closed position the transparent switch gives off a warm white LED illumination. By pressing the switch youwill unlock the head which can then be pulled out. At the same time the position illumination is switched tothe with 3 Power LEDs equipped, 350° rotatable head.


SPECIAL RANGE | FLOOR CUPBOARD FITTINGS326


SPECIAL RANGE | CUPBOARD FITTINGS 327

Spare lamp T5:13W 2700K 59129513W 4000K 591296


Material:Plastic

Dimensions:L/W/H: 56.2/8/3 cmConnection lead-L: 1.9 m

Accessories/Included parts:Ballast (incl.)Switch (incl.)

Note:Connection of several lampspossible.


FURNITURE 513 0.6

Connection cable:L: 40 cm 160721

Connection plug:L: 0.5 cm 160731

ACCESSORIES for Furniture 513


Material:Aluminium



Versions:alu naturalLED white 111881

FURNITURE LED 37 0.18mA350

230~ LED

3 pce.

Note:The spare T5 lamp is only available in 3-pcepacking units (see page 680).


Material:Aluminium



Versions:alu naturalLED white 160341

FURNITURE LED 50 0.32

LED

3 pce.

60°

120°

230~

CUPBOARD FITTINGS

mA350

230~


SPECIAL RANGE | CUPBOARD FITTINGS328

Furniture LED 65Numerous mounting possibilitieswith the included fasteningclamps.

Lamp:LED (incl.)8W total

Material:Plastic

Dimensions:L/W/H: 33/3/3Power cable-L: 1 m

Accessories/Included parts:Euro plug (incl.)Fastening accessories (incl.)

Note:Up to 10 lights can be connec-ted to each other. Numerousmounting possibilities with theincluded fastening clamps.

Versions:whiteLED white 160311LED warm white 160312

FURNITURE LED 65 0.2

LED

65 pce.

90°

Dimensions:L: 33 cm


CABLE TRANSITS for Furniture LED 65 0.04

230~

230~




Material:Steel

Dimensions:Outer-Ø/D: 6.6/3 cm



chrome 116042gold 116043

FURNITURE TYPE 3 0.13.05.8


Material:Steel



Versions:metal brushed 111108

MIL 20 0.15



Dimensions:L/W/H: 12/13.5/3 cmBallast-L/W/H:7.3/4/1.6 cm


Note:2 m cable with euro plug to thedriver.1 m cable with plug from driver1st LED.0.6 m cable with plug betweenthe following LED.

Versions:metal brushedLED white 112251

MIL LED 3 3pce-set 0.62mA350

230~ LED

3 pce.

25°

Socket/Lamp:G4/Top LED (incl.)1.5W total


Note:Convert the Furniture Type 3 andMil 20 to LED. Operate onlywith a conventional transformer!


OCTAGON LED MODULE 12V 0.01

120°LED

9 pce.12~

12~

12~

Lamp:LED (incl.)

Material:Plastic


Accessories/Included parts:Switch (incl.)Fastening accessories (incl.)3x Battery AAA LR03 1.5V (excl.)

Note:For battery operation.

Versions:silver greyLED white 160331

LEDTUI 0.08

LED

4 pce.

60°



max. length of Delf light bars in cm

Transformer

100W

60W

12W

max. number of Delf light bars:

Transformer

100W

60W

12W



Dimensions:L/W/H: 60.6/1.6/0.8 cmconnection lead-L: 1.5 m

Accessories/Included parts:3 fastening clamps (incl.)Power supply (excl.)

Note:LED power unit (eg. 470500,470502, 470506) see page645. Dimmable (eg. with470540).


PADI LED 600 light bar 60 cm 0.12

LED

48

120°24=

+A +A

+A +A

Lamp:LED (incl.)1.9W total



Accessories/Included parts:Power supply (excl.)

Note:LED power unit (eg. 470500,470502, 470506) see page645. Dimmable (eg. 470540).Directly connectable via wrapconnections.For a output of >50W a newfeed-in must be made!

Versions:alu anodizedLED white 631401LED warm white 631402LED yellow 631404LED green 631405LED red 631406LED blue 631407

DELF C 500 light bar 50 cm 0.1

LED

24

120°24=





Note:LED power unit (eg. 470500,470502, 470506) see page645.Dimmable (eg. 470540).Directly connectable via wrapconnections.For a output of >50W a newfeed-in must be made!

Versions:alu anodizedLED white 631411LED warm white 631412LED yellow 631414LED green 631415LED red 631416LED blue 631417

DELF C 1000 light bar 1 m 0.2

LED

48

120°24=

1000 500




MOUNTING CLIPS for DELF C


Note:Mechanical connector to protectthe plug connection.

Versions:frosted/2 pce. 631423

CONNECTION CLAMPS for DELF C

Versions for Delf C:black 631421

Versions for Delf C RGB:black 631424

FEED-IN for DELF C

Output:50W max.

Dimensions:L: 1.5 m

Dimensions:L: 12 cm

Versions for Delf C:black 631422

Versions for Delf C RGB:black 631425

FLEX CONNECTOR for DELF C


500 1000


max. number of Delf C RGB lightbars:

Lamp:3in1 LED (incl.)9.6W total




Note:LED power unit (eg. 470500.470502. 470506) see page645. Controllable with PowerLIM® 24V (470521) or EasyLIM® Pro RF (470600) or LIM2®

controller (470531) see page638-642 and converter(470509).Directly connectable via wrapconnections.For an output of >50W a newfeed-in must be made!

Versions:alu anodizedRGB 631413

DELF C 1000 RGB light bar 1m 0.2

LED

48 pce.

120°24=

Lamp:3in1 LED (incl.)4.8W total



Accessories/Included parts:Power supply (excl.)Controller (excl.)

Note:LED power unit (eg. 470500.470502. 470506) see page645. Controllable with PowerLIM® 24V (470521) or EasyLIM® Pro RF (470600) or LIM2®

controller (470531) see page638-642 and converter(470509).Directly connectable via wrapconnections.For an output of >50W a newfeed-in must be made!

Versions:alu anodizedRGB 631403

DELF C 500 RGB light bar 50cm 0.1

LED

24

120°24=

max. length of Delf C RGB light bars in cm

Transformer

100W

60W

12W

Transformer

100W

60W

12W

+A +A

+A +A


RECESSED FITTINGS | RECESSED FITTINGS334

RECESSED FITTINGS

5-LightingD-HK10-Einbau-1.qxp:HK_10.qxd 31.08.2009 9:46 Uhr Seite 334

RECESSED FITTINGS | RECESSED FITTINGS 335

Bedside left Bedside right

350°

90°

Lamp:PowerLED (incl.)3WandLED (incl.)0.06WClosed current. 10mA

Material:Aluminium


Accessories/Included parts:Cavity wall fitting clamp (incl.)LED converter (excl.)

Note:Integrated blue LED-light in clo-sed position.The main LED is switched onwith the push-lock system.Operate only with driver(464200). see page 643.

Versions:silver greyLED white/blueleft 146244right 146254

LED warm white/blueleft 146242right 146252

BEDSIDE lef t/right 0.85700mA

LED

2 pce. 8.5

110°

17.5/7.2


Note:To fit the Bedside lamp in maso-nry walls.


FITTING BOX for Bedside lef t/right817.5/8



355°

190°

Lamp:PowerLED (incl.)3WandLED (incl.)0.06WClosed current. 10mA

Material:Aluminium

Dimensions:Ø/H: 11.2/6.3 cmConnection lead: 50 cm


Note:Flip function to change the LEDs

Versions:aluminiumLED white/blue 146381LED warm white/blue 146382

GilaLED 0.36700mA

LED

2 pce. 5.9

355°

45°

0.42700mA

LED

2 pce. 3.28.4

Lamp:PowerLED (incl.)3WandLED (incl.)0.06W


Dimensions:Visable Ø/D: 10/5.5 cm

Accessories/Included parts:LED converter (excl.)2 switch (incl.)

Note:Suitable for cavity walls and cei-lings with a material thickness ofmax. 24 mm.Both LEDs can be switchedseperately.

Versions:silver greyLED white/blue 146291LED warm white/blue 146292

DiraLED

10.2

Integrated LED-light inclosed position.

Flip function to chan-ge the LEDs


337




Material:Aluminium


Accessories/Included parts:LED converter (excl.)Cavity wall installation box (excl.)

Note:For mounting with cavity wallbox. the fitting depth results fromthe fitting box.


STIX FLUSH MOUNT 0.22700mA

LED

1 pce. 350°

100° 30°


Material:Aluminium


Accessories/Included parts:Power unit (excl.)

Note:Wall recessed lamp for connec-tion to a 24V/DC power unitsee page 645.


LED QUAD 1 Design by CDC 0.1724=

LED

4 pce. 3.5 5


Material:Aluminium


Accessories/Included parts:Power unit (excl.)

Note:Wall recessed lamp for connec-tion to a 24V/DC power unitsee page 645.


LED QUAD 2 Design by CDC 0.3624=

LED

12 pce. 3.5 5

Rear view LED Quad (152001)






Versions:chromeglass satin finish 111112

TWISTER 0.212~116.5






Dimensions:Ø/H: 8.5/4 cmGlass-H: 2 cm



GLADOS ROUND 0.512~15.56.6



Dimensions:L/W/H: 8/8/4 cmGlass-H: 2 cm



GLADOS SQUARE 0.512~15.56.6



Dimensions:Ø/H: 10.5/13 cmVisable Ø/H: 10.5/2.5 cm

Note:Suitable for cavity ceilings with amaterial thickness of 5-20 mm.

Versions:whiteGlass partial satin finish 111611

REDIT GU10 0.35230~

10.59.5



Dimensions:Ø/H: 10.5/11.5 cmVisable Ø/H: 10.5/2.5 cm


Note:Suitable for cavity ceilings with amaterial thickness of 5-20 mm.


REDIT MR16 0.3512~99.5

Socket/Lamp:G5.3/MR16 (excl.)50W





GLIDE MR16 0.266.5 11

12~



96.8

920/6.8

937/6.8


Material:Aluminium

Dimensions:L/W/H: 15/9/15 cmMax. ceiling thickness: 2.5 cm



KALU RECESSED 1 0.3412~


Material:Aluminium

Dimensions:L/W/H: 22/6.8/9 cmMax. ceiling thickness: 2.5 cm



KALU RECESSED 2


Material:Aluminium

Dimensions:L/W/H: 45/9/15 cmMax. ceiling thickness: 2.5 cm



KALU RECESSED 3

90°

350°

0.6512~90°

350°

0.9512~90°

350°

QRB PowerLED lamppage 671



8.5 12

Socket/Lamp:E27/AGL (excl.)60W max.orE27/energy saver (excl.)max. Ø/L: 13/5.5 cm


Dimensions:Visable Ø/H: 12/13 cm


GLASS TUBE E27 0.62230~


345RECESSED FITTINGS | RECESSED FITTINGS



Dimensions:Ø/H: 15/7.5 cmConnection lead: 25 cm


Note:When connecting several lampstogether please use a seriesconnection!Suitable drivers page 643.

Versions:silver greyLED white 111831LED blue ▼ 111837

LEDISC 0.45350mA

LED

1 pce. 7.6 5




Material:Aluminium/crystal glass

Dimensions:Visable Ø/H: 4/5.9 cm



ICICLED III 0.063 3

350mALED

1 pce.






ICICLED II 0.063 3

350mALED

1 pce.






ICICLED I 0.063 3

350mALED

1 pce.


1a-SLV-HK10-Einbau-1.qxd:HK_10.qxd 13.07.2009 12:15 Uhr Seite 347



Material:Aluminium




GRID Design by CDC 0.25.8 9

12~


Material:Aluminium


Versions:alu natural ▼ 134254

GRID G9 Design by CDC 0.255.8 9

230~


1a-SLV-HK10-Einbau-1.qxd:HK_10.qxd 13.07.2009 12:16 Uhr Seite 3485-LightingD-HK10-Einbau-1.qxp:HK_10.qxd 31.08.2009 9:47 Uhr Seite 348


RECESSED FITTINGS | DOWNLIGHTS


Material:Glass

Dimensions:Visable L/W/H: 8/7.8/6.5 cm

Versions:Dichroic 114928

DICHRO CUBE 0.924.2 14.5

230~


Material:Glass


Versions:Dichroic 114925

DICHRO TUBE 0.724.2 14.5

230~


Material:Glass

Dimensions:Visable L/W/H: 7/7/6.1 cm


YUDI 0.635.6 11

12~

349

Versions:clear 114961

half clear/black 114960half clear/amber 114962half clear/blue ▼ 114967



RECESSED FITTINGS | DOWNLIGHTS350





Versions:alu brushed/clear ▼ 114929

STRIPES 0.446 11

12~



Dimensions:Cover-Ø: 8 cmGlass cover-Ø/H: 6.5/5 cmMax. ceiling thickness: 1.8 cm


Note:Suitable driver(eg. 464108) see page 643.

Versions:chrome/whiteLED white 114811LED warm white 114812

ORION LED PLATE 0.296 11

350mALED

1 pce.

45°


Material:glass



Versions:blue/clear ▼ 114717

BICOLO 0.296 11

12~





Versions:alu naturalGlass frosted 114720

PICU DOWNLIGHT 0.327 11

12~





Material:Steel/crystal glass

Dimensions:Visable L/W/H:10.2/10.2/2.7 cm


Versions:chromecrystal clear 114920

CRYSTAL I 0.566.4 8

12~






CRYSTAL II 0.466.4 8

12~





Note:For cavity walls.

Versions:metal brushedcrystal satin finish ▼ 114922

CRYSTAL III 0.385 8

12~



Dimensions:Visable Ø/H: 9.2/2.8 cm

Accessories/Included parts:Transformer (excl.).

Versions:metal brushedcrystal clear 114923

CRYSTAL IV 0.386.2 8

12~




Accessories/Included parts:Transformer (excl.).Note:With slanted crystal glass.

Versions:chromecrystal clear ▼ 114924

CRYSTAL V 0.546.4 8

12~



Dimensions:Visable Ø/H: 9.5/6 cm



CRYSTAL VI 0.816 11

12~




Note:When connecting several ofthe LED products illustrated onthis page please use a seriesconnection!






CRYSTAL VII 0.715.6 11

12~



Dimensions:Cover-Ø: 8 cmGlass-L/W/H: 6.4/6.4/4.3 cmMax. ceiling thickness: 1.8 cm




CRYSTAL LED III 0.286 9.5

350mALED

1 pce.

120°

Lamp:G4/2pin base (excl.)20W max.

Material:Glass

Dimensions:Visable Ø/H: 9.7/5 cm


Note:Suitable for ceilings with a mate-rial thickness of max. 15 mm.

Versions:crystal clear 114931

CRYSTAL VIII 12~



Dimensions:Cover-Ø: 4.9 cmGlass-Ø/H: 6/4.5 cmMax. ceiling thickness: 1.8 cm



CRYSTAL LED II 0.284 11

350mALED

1 pce.

120°




Dimensions:Visable Ø/H: 7/4 cmmax. ceiling thickness: 1.8 cm


Note:When connecting several lampsplease use a series connection


CRYSTAL LED 0.24 11

350mALED

1 pce.

60°

0.695.0 11





Material:Aluminium



Note:Max. ceiling thickness: 2.8 cm


ZEBLED ROUND 1 0.11350mA

LED

1 pce. 4 11

25°


Material:Aluminium





ZEBLED SQUARE 1 0.12350mA

LED

1 pce. 4 11

25°

Note: When connecting several of the LED products illustrated onthis page please use a series connection!


Material:Aluminium





ZEBLED ROUND 3 0.13350mA

LED

3 pce. 4 11

25°


Material:Aluminium

Dimensions:Visable L/W/H: 7.4/7.4/2.5 cm




ZEBLED SQUARE 3 0.2350mA

LED

3 pce. 4 11

25°





Material:Acrylic

Dimensions:Visable L/W/H: 12/5/2 cm



Versions:Acrylic partial satin finishLED white 114881LED warm white 114882

ACLED SQUARE 3 0.2350mA

LED

3 pce. 11

25°

9.5/4


Material:Aluminium/Acrylic





ALLED 0.23350mA

LED

3 pce. 11

25°

9/4


Material:Acrylic





0.09350mA

LED

1 pce. 4 11

25°


Material:Acrylic





ACLED ROUND 0.07350mA

LED

1 pce. 4 11

25°

ACLED SQUARE




Note: When connecting several of the Fok LEDplease use a series connection!

90°


Material:Aluminium

Dimensions:W/H/D: 9/9/6 cmConnection lead: 44.5 cm

Accessories/Included parts:Mini-plug (incl.)LED converter (excl.)

Note:The light beam is focusable byremoving the front cover!FOK LED can only be operatedwith suitable 350mA driver(eg. 464111) see page 643.Suitable connector strip(111850) see page 643.Accessories like flush mountingand fitting box see right side.


FOK LED Design by CDC 0.2350mA

LED

1 pce. 67.5/7.5




7.5/7.5





Note:The model Basic and Slat aresuitable for application with theOctagon LED-module.

Versions:silver greyModel Basic 112732Model Slat 112762Model Curve 112772

FLAT FRAMES 0.1512~4.57.5/7.5

Material:Plastic


Note:Specially for exposed concreteapplications.Transformer connection external.Suitable for Flat Frame, FrameBasic LED, Frame Curve LED,Frame RGB LED and FOK LED.


FITTING BOX for Flat Frames

Material:Steel bronzed

Dimensions:W/H: 13.5/13.5 cm

Note:Speciall for masonry work/flush mounting.Suitable for Flat Frame, FrameBasic LED, Frame Curve LED,Frame RGB LED and FOK LED.

Versions:bronzed 112780

RECESSED FRAME for Flat Frames

Model Basic Model Slat Model Curve

Octagon LED modulepage 668





Material:Steel

Dimensions:W/H/D: 7.5/7.5/5 cmCeiling thickness: > 0.8 cm


Versions:silver grey 151871metal brushed 151878

FRAME 0.2312~66.5/7.1

7/6.5

Material:Steel bronzed

Dimensions:Outer-W/H: 12/12 cmInner-W/H: 7/6.5 cm

Note:For Frame (151871/ 151878)and Frame Curve (151862).Only neccessary for masonrywalls.

Versions:Steel bronzed 925100

FLUSH MOUNT FRAME for Frames


Material:Steel

Dimensions:W/H/D: 7.5/7.5/5 cmCeiling thickness: > 0.8 cm



FRAME CURVE 0.2312~66.5/7.1





Material:Aluminium



Note:For cavity walls and ceilings!


FRAME DISTA MR16 0.212~137.5/7.5


Material:Aluminium





FRAME BASIC MR16 0.212~137.5/7.5


Material:Aluminium




FRAME DISTA GU10 0.25230~167.5/7.5


Material:Aluminium




FRAME BASIC GU10 0.25230~167.5/7.5


Material:Aluminium





FRAME BASIC JC 0.2512~137.5/7.5






Dimensions:W/H/D: 9/9/5.5 cmConnection lead: 45 cm

Accessories/Included parts:Mini-plug (incl.)LED converter (excl.)Folien (excl.)

Note:Operate only with suitable LED-driver/electronic ballast 350mA(eg. 464108 or 464110).Driver for LED Frames see page643.Suitable connector strip(111850) see page 643.

Versions:silver greyLED white 111261LED warm white 111262LED blue 111267

FRAME BASIC LED Design by CDC 0.2350mA

67.5/7.5

LED

1 pce.


Material:Aluminium

Dimensions:W/H/D: 9/9/3.8 cmConnection lead: 30 cm


Note:Operate only with suitable LED-driver (eg. 464111)see page 643.Suitable connector strip(111850) see page 643.


FRAME CURVE LED Design by CDC 0.11350mA

4.57.5/7.5

LED

1 pce.

Lamp:LED (incl.)0.3W

Material:Plastic/glass



Note:Operate only with conventionaltransformer see pages 648-649.


IP44 Transformer 10VA 451010

MINI FRAME LED Design by CDC 0.0212~

6.5

LED

4 pce. 3.5

Frame Basic LEDThe minor heat development allows the inserti-on of negatives or individually made foils

Note:When connecting severalFrame Curve LED and FrameBasic LED together please usea series connection!




Lamp:RGB PowerLED (incl.)1x red, green, blue3x 1W

Material:Aluminium



Note:Operate with RGB-master con-troller 350mA. (470523) orRGB-slave controller 350mA.(470524 ) see page 642.

Versions:silver greyLED RGB 111263

FRAME RGB LED Design by CDC 0.2350mA

67.5/7.5

LED

3 pce.







Accessories/Included parts:Electronic ballast (incl.)Diffuser (incl.)

Note:Only suitable for cavity wall andceilings.

Versions:alu anodized 160124

T5-BAR 24W 1.0610

230~59/4.5




Accessories/Included parts:Electronic ballast (incl.)Diffuser (incl.)

Note:Only suitable for cavity wall andceilings.


T5-BAR 54W 2.0510

230~119/4.5



Dimensions:W/H/D: 33.4/6/6.3 cmFlush mount frame:W/H/D: 40/12.3/2.5 cmInstallation dimensions: 33/4.8 cm

Accessories/Included parts:Diffuser (incl.)Power unit (excl.)

Note:Recessed fitted lamp for connec-tion to a 24V/DC power unitsee page 645.


Flush mount frameFor fitting in masonry walls forGlenos LED.silver grey 112810

GLENOS LED Design by CDC 0.66.532.5/4.5

LED

24 pce.




Accessories/Included parts:Diffuser (incl.)Power unit (excl.)

Note:Recessed fitted lamp for connec-tion to a 24V/DC power unitsee page 645.Suitable for cavity walls and cei-lings with a material thickness of0.5 - 2 cm.


GLENOS LED XL 0.989.5

24=

24=

97.7/4.7

LED

78





Material:Aluminium

Dimensions:Outer-W/H: 12/15.5 cmRear housing.-W/H/D:10.5/19.3/7.2 cm



Flush mount frameFor Downunder I 925200

DOWNUNDER I 0.5512~911.5/14

Socket/Lamp:G24d-1/TC-D energy saver 2-pin (excl.)13W

Material:Aluminium

Dimensions:Outer-W/H: 22.1/30.5 cmRear housing-W/H/D:20/38.5/9 cm


Versions:alu natur 151971

Flush mount framefor Downunder II 925250

TC-D 2-pin. 13WWDL 2700K 508213NDL 4000K 508313

DOWNUNDER II 2230~921/28.5


Material:Aluminium

Dimensions:Outer-W/H: 22.1/30.5 cmRear housing-W/H/D:20/36/9 cm


Flush mount framefor Downunder III 925250

DOWNUNDER III 1.5230~921/28





Material:Aluminium

Dimensions:Outer-W/H: 8/15.5 cmRear h.-H/W/D: 19.5/7/7 cm


Versions:alu naturalLED white 152051LED blue ▼ 152057

Flush mount frame:for Downunder 05 LED 925195

DOWNUNDER 05 LED 0.59

LED

1 pce.mA

350

230~

7.1/14


Material:Aluminium

Dimensions:Outer-W/H: 8/15.5 cmRear h.-W/H/D: 19.5/7/7 cm



Flush mount framefor Downunder 05 925195

DOWNUNDER 05 0.3912~97.1/14


Material:Aluminium




LED DOWNUNDER MINI 0.125

LED

1 pce. 4.5/12.5

Material:Steel galvanized

Dimensions:W/L: 12/20 cm

Versions:152079

FRAME for LED Downunder Mini 0.09

350mA40°

Note:When connecting several ofthe LED items illustrated on thispage, please use a seriesconnection!





Material:Aluminium

Dimensions:W/H/D: 9/23/7.5 cmFitting box-W/H/D:9.5/23.5/9 cm

Accessories/Included parts:Fitting box (incl.)

Note:When used in moist rooms oroutdoor applications, the fixturemust be fitted with the windowfacing downwards!Fitting box for the application inmasonry walls.

Versions:stone greyLED white 230211LED blue 230217

alu brushedLED white 230311

DOWNUNDER LED 15 0.4510

LED

15 pce. 7.5/21IP44

max. 10230~


Material:Aluminium

Dimensions:W/H/D: 18/23/7.5 cmFitting box-W/H/D:18.5/23.5/9 cm


Note:When used in moist rooms oroutdoor applications the fixturemust be fitted with the windowfacing downwards!Fitting box for the application inmasonry walls.

Versions:stone greyLED white 230221

DOWNUNDER LED 27 0.7510

LED

27 16.5/21IP44

max. 10230~


Material:Aluminium

Dimensions:Ø/D: 12.5/6 cmFitting box-Ø/D: 12/7.2 cm


Note:When used in moist rooms oroutdoor applications, the fixturemust be fitted with the windowfacing downwards!Fitting box for the application inmasonry walls.

Versions:stone greyLED white 230201LED warm white 230202LED blue 230207

alu brushedLED white 230301

DOWNUNDER LED 14 0.257.2

LED

14 pce.IP44

max. 10230~

11.5





Material:Aluminium


Note:Suitable for cavity walls and cei-lings with a thickness ofmax. 12 mm.


DOWNUNDER MID 0.6230~1223/12.5

Socket/Lamp:2G11/TC-L energy saver (excl.)36W

Material:SteelReflector Aluminium


Accessories/Included parts:VVG (incl.)


Flush mount frame925252

DOWNUNDER PL 36 2.5230~8.548.5/17.5




Note:Suitable for cavity walls with amaterial thickness of 12 mm.

Versions:Glass satin finishwhite 160051silver grey 160059

Flush mount frameFor Kotak Wall 925251

KOTAK WALL 1.45230~1218.5/18.5

Socket/Lamp:E27/energy saver (excl.)max. Ø/L: 7/17.5 cm

Material:Aluminium/steel/glass

Dimensions:W/H/D: 24/20.5/11 cmFlush mount frame:Outer-L/W: 30.5/24.5 cmCut out: 19/19 cm




70°


Material:Steel



Note:Suitable for cavity walls and cei-lings with a material thickness of0.5-20 mm.


INDI REC 1S CARDANIC 0.3112~119.3


Material:Steel





INDI REC 1F 0.5112~1417.5/7


Material:Steel





INDI REC 2S 0.5412~1417.5/7


Material:Steel




INDI REC 1S GU10 0.34159.3

Socket/Lamp:GX10/CMH-MR16 (excl.)20/35W

Material:Steel


Accessories/Included parts:Electronic ballast (excl.)



INDI REC 1S GX10 0.31149.3

230~

45°




350° 45°

350° 45°

350° 45°


Material:Aluminium

Dimensions:Cover-L/W: 11/11 cm


Versions:silver grey 112531white 112631

ROW 1 MR16 0.29.7 9.5

12~


Material:Aluminium




ROW 2 MR16 0.39.5

12~18.5/9.7


Material:Aluminium

Dimensions:Cover-L/W: 28.5/11 cm



ROW 3 MR16 0.49.5

12~27/9.7





360° 45°

350° 45°


Material:Aluminium



Versions:silver grey ▼ 112530white ▼ 112630

ROW 1 OVAL MR16 0.29.2 10

12~


Material:Aluminium



ROW 1 GU10 0.159.7 12

230~

Recessed view of Row 1Oval MR16 silver grey

(112530)




350° 45°

350° 30°

350° 30°

350° 45°





ROW ES111 0.716.5 13

230~

Socket/Lamp:G12/HQI-T; CDM-T (excl.)35W/70W



Accessories/Included parts:Ballast (excl.)

Note:Suitable accessories like ballastand HV-cable see page 646.

Versions:glass satin finishsilver grey 112551

ROW G12 1.0416.5 25

Socket/Lamp:E27/energy saver (excl.)max. Ø/L: 4.5/17 cm



Accessories/Included parts:Diffuser glass (incl.)


ROW ELT 1.416.5 25

230~


Material:Aluminium




ROW 1 QRB111 0.616.5 10

12~

Different rear views:Left: Row 1 QRB111 (112540)Right: Row QRB111 (112550) see page 380





350° 45°




Accessories/Included parts:Housing (incl.)Transformer (excl.)


ROW QRB111 0.716.5 13.5

12~




8 10


Material:Aluminium

Dimensions:Cover-Ø: 9 cm



chrome 111442nickel satin finish 111447

TRIA II DOWNLIGHT 0.13350°

12~30°




360° 30°

360° 30°


Material:Aluminium




NEW TRIA II MR16 0.313

12~16/8.2


Material:Aluminium




NEW TRIA III MR16 0.4313

12~24.5/8.5

360° 30°


Material:Aluminium



Versions:alu brushed ▼ 111354

NEW TRIA IV MR16 0.5413

12~16.5/16

360° 30°


Material:Aluminium




NEW TRIA I MR16 0.158 13

12~

8 16


Material:Aluminium



Rear view of New Tria IMR16 (111351)

Rear view New Tria roundMR16 (111274)


NEW TRIA ROUND MR16 0.11350°

12~45°



383RECESSED FITTINGS | RECESSED FITTINGS

360° 30°


Material:Aluminium



NEW TRIA III GU10 0.4612.5

230~24.5/8.2

8.2 12.5


Material:Aluminium



NEW TRIA ROUND GU10 0.15360°

230~30°

360° 30°

360° 30°


Material:Aluminium



NEW TRIA I GU10 0.28.2 12.5

230~


Material:Aluminium



NEW TRIA II GU10 0.3512.5

230~16/8.2

Rear view New Tria IIIGU10 (111363)




15.5 12.5


Material:Aluminium

Dimensions:Cover-Ø: 16.5 cm



NEW TRIA ROUND QRB111 0.23360°

12~30°

360° 30°

360° 30°

360° 30°


Material:Aluminium




NEW TRIA I QRB111 0.3515.5 12.5

12~


Material:Aluminium




NEW TRIA II QRB111 0.6712.5

12~29.7/15.5


Material:Aluminium




NEW TRIA III QRB111 0.7212.5

12~45/15.5





360° 30°

360° 30°


Material:Aluminium



NEW TRIA II ES111 0.6712.5

230~29.7/15.5


Material:Aluminium



NEW TRIA III ES111 1.0412.5

230~45/15.5

360° 30°


Material:Aluminium



NEW TRIA I ES111 0.3815.5 12.5

230~

15.5 12.5


Material:Aluminium



Rear view New Tria IES111 (111381)

NEW TRIA ROUND ES111 0.33360°

230~30°





8 12.5


Material:Aluminium

Dimensions:Lamp-H: 10 cmCover-Ø: 9 cm (round)Cover-L/W: 9/9 cm (square)


Note:Suitable accessories like electro-nic ballast and HV-cables seepage 646.

Versions:alu brushedround 111450

square 111451

NEW TRIA GX10 0.15360° 45°

15.5 22

Socket/Lamp:G12/HQI-T; CDM-T (excl.)35/70

Material:Aluminium

Dimensions:Lamp-H: 20 cmCover-Ø: 16.5 cm (round)Cover-L/W: 16.5/16.5 cm (square)Max. ceiling thickness: 2 cm

Accessories/Included parts:Reflector (incl.)Ballast (excl.)

Note:Reflector 38°.Suitable accessories like electro-nic ballast and HV-cables seepage 646.

Versions:alu brushedround 111680square 111681

NEW TRIA G12 0.36360° 30°

14 20

Socket/Lamp:GU6.5/CMH-TC (excl.)20/35W

Material:Aluminium

Dimensions:Lamp-H: 18 cmCover-Ø: 15 cm (round)Cover-L/W: 15/15 cm (square)max. ceiling thickness: 2 cm

Accessories/Included parts:Electronic ballast (excl.)Reflector (excl.)

Note:The illustrated reflector is notincluded. Please select thereflector with respective emittingangle from the list below.Suitable accessories like electro-nic ballast and HV-cables seepage 646.

Versions:alu brushedround 111670square 111671

NEW TRIA GU6.5 0.3360° 30°

Material:Aluminium


Versions:chrome. 12° 153721chrome. 24° 153722chrome. 38° 153723chrome. 60° 153726

REFLECTOR for New Tria GU6.5 0.08

CMH-TC lamppage 664

Rear view New TriaGU6.5. round (111670)




360° 90°

360° 90°





NICELIGHT 1 0.6410.5

12~12/12

Socket/Lamp:GX5.3/MR16 (excl.)2x 50W max.


Dimensions:Visable L/W/H: 23.6/13/0.5 cm



NICELIGHT 2 1.1310.5

12~22.8/12

The colour of the glass panes in the Nicelight 1 +2 depends on the emitting angle of the chosenlamp. The reddish colour arises from a dichroicMR16 lamp with 40° emitting angle.





Note: When connecting several of the illustrated LED products togetherplease use a series connection!

60°


Material:Aluminium

Dimensions:L/W/H: 6/6/2 cmConnection lead: 30 cm


Note:Operate only with a suitableconverter/driver (eg. 464108,464110, 464111) see page643. Connector strip (111850)see page 643.Suitable for fitting in cavity cei-lings!


LELEX 1 0.06350mA

LED

1 pce. 5.3 3.5

25°




360° 60°

360° 60°

70°350°

70°350°


Material:Aluminium




NICETUBE 1 0.1810

12~9


Material:Aluminium




NICETUBE 2 0.3410

12~15/8.3


Material:Aluminium

Dimensions:Visable L/W/H: 8/8/2 cmMax. ceiling thickness: 1.8 cm




LEDUSE 1 0.15350mA

LED

1 pce. 11

25°

7/7


Material:Aluminium

Dimensions:Visable L/W/H: 13.5/8/2 cmMax. ceiling thickness: 1.8 cm




LEDUSE 2 0.26350mA

LED

1 pce. 11

25°

11.5/7

70°310°


Material:Aluminium

Dimensions:Visable L/W/H: 10/10/2.5 cmMax. ceiling thickness: 2 cm




LEDUSE LARGE 0.21700mA

LED

1 pce. 11

25°

7.5/7.5



392


Material:Front aluminium



Versions:cream white matt 154111silver grey 154112

AIXLIGHT® MOD 1 MR16 0.412~9.511/11






AIXLIGHT® MOD 2 MR16 0.7512~9.522/11






AIXLIGHT® MOD 3 MR16 1.112~9.532.5/11






AIXLIGHT® MOD 4 MR16 1.7512~9.520/20

coloured lamppages 658-659

LED lamppages 668-670



RECESSED FITTINGS | AIXLIGHT® 393


Material:Front Aluminium



AIXLIGHT® MOD 1 GU10 0.62230~1211/11





AIXLIGHT® MOD 2 GU10 0.9230~1226/11





AIXLIGHT® MOD 3 GU10 1.6230~1238/11





AIXLIGHT® MOD 4 GU10 2.35230~1220/20




RECESSED FITTINGS | AIXLIGHT®394






AIXLIGHT® MOD 1 QRB111 0.8512~9.516.5/16.5






AIXLIGHT® MOD 2 QRB111 1.7612~9.534.5/17



395RECESSED FITTINGS | AIXLIGHT®






AIXLIGHT® MOD 3 QRB111 2.3512~9.549/17






AIXLIGHT® MOD 4 QRB111 3.1512~9.533/33



RECESSED FITTINGS | AIXLIGHT®396





AIXLIGHT® MOD 1 ES111 1.05230~1516/16





AIXLIGHT® MOD 2 ES111 2.2230~1535.5/17





AIXLIGHT® MOD 3 ES111 2.85230~1549/17





AIXLIGHT® MOD 4 ES111 4.65230~1532/32




RECESSED FITTINGS | AIXLIGHT® 397

Socket/Lamp:GX10/Britespot ES111(excl.)35/70W




Note:Suitable ballast and connectionlead see page 646.


1.11517/17

Socket/Lamp:G53/QRB111 (excl.)2x 50W max.andG24q-3/TC-DE energy saver 4-pin (excl.)2x 26W

Material:Glass/front aluminium


Accessories/Included parts:Electronic ballast (incl.)Transformer (excl.)


AIXLIGHT® MOD PL/QRB Design by CDC 3.51933/3312~

230~

12~

230~

Socket/Lamp:G53/QRB111 (excl.)2x 50W max.andRx7s/HQI-TS; CDM-TS (excl.)1x 150W

Material:Glass/front aluminium


Accessories/Included parts:Ballast (excl.)Transformer (excl.)


AIXLIGHT® MOD HQI/QRB Design by CDC 3.21933/33

AIXLIGHT® MOD 1 BRITESPOT ES111



RECESSED FITTINGS | AIXLIGHT® FLAT398


Material:Steel

Dimensions:L/W/H: 20.5/20.5/15 cmMaterial thickness fitting surface:1-2.4 cm

Versions:chrome/matt black 154602

AIXLIGHT® FLAT SINGLE ES111 1.25230~1517/17


Material:Steel

Dimensions:L/W/H: 39/21/15 cmMaterial thickness fitting surface:0.5-2.4 cm


AIXLIGHT® FLAT DOUBLE ES111 2.25230~1535.5/18


Material:Steel

Dimensions:L/W/H: 20.5/20.5/9.5 cmMaterial thickness fitting surface:1-2.4 cm



AIXLIGHT® FLAT SINGLE QRB111 0.9512~9.517/17


Material:Steel

Dimensions:L/W/H: 39/21/9.5 cmMaterial thickness fitting surface:0.5-2.4 cm



AIXLIGHT® FLAT DOUBLE QRB111 1.812~9.535.5/18

Socket/Lamp:GX10/Britespot ES111 (excl.)35/70W

Material:Steel

Dimensions:L/W/H: 20.5/20.5/15 cmMaterial thickness fitting surface:1-2.4 cm


Note:Suitable ballast and connectionlead see page 646.


1.31517/17

AIXLIGHT® FLAT SINGLE BRITESPOT ES111




RECESSED FITTINGS | AIXLIGHT® FLAT 399



RECESSED FITTINGS | AIXLIGHT® PRO400

Material:Steel

Dimensions:L/W/D: 15.5/15.5/18.5 cmFitting frame-L/W/D:19/24.5/8 cm

Accessories/Included parts:Fitting frame (incl.)

Note:Suitable for cavity ceilings with amaterial thickness of max. 20mm.Suitable for all Aixlight® Promodules (see pages 405-407).


AIXLIGHT® PRO I FRAMELESS Design by CDC 2.152319/19

Material:Steel





AIXLIGHT® PRO II FRAMELESS Design by CDC 3.52335/19

Material:Steel

Dimensions:L/W/D: 46.5/15.5/18.5 cmFitting frame-L/W/D:49.5/24.5/8 cm




AIXLIGHT® PRO III FRAMELESS Design by CDC 4.82350/19


Material:Steel/acrylic


Accessories/Included parts:Electronic ballast (incl.)Fitting frame (incl.)

Note:Suitable for cavity ceilings with amaterial thickness of max. 20mm.


AIXLIGHT® PRO T5 FRAMELESS Design by CDC 5.2230~92/18.8 15.5



RECESSED FITTINGS | AIXLIGHT® PRO 401

Material:Steel

Dimensions:L/W/D: 31/31/18.5 cmFitting frame-L/W/D:40/34.5/8 cm


Note:For cavity ceilings with a materi-al thickness of max. 20 mm.Suitable for all Aixlight® Promodules (see pages 405-407)

Versions:black ▼ 115154

AIXLIGHT® PRO IV FRAMELESS Design by CDC 5.92334.5/34.5



Material:Steel

Dimensions:L/W/D: 17.5/17.5/19 cm

Note:Suitable for cavity ceilings with amaterial thickness of max.8-29 mm.Suitable for all Aixlight® Promodules (see pages 405-407).


AIXLIGHT® PRO I FRAME 1.02115.5/15.5

Material:Steel




AIXLIGHT® PRO II FRAME 1.452129.5/15.5

Material:Steel




AIXLIGHT® PRO III FRAME 1.822143.5/15.5

Material:Steel




AIXLIGHT® PRO IV FRAME 3.52130.5/30.5


Material:Steel/acrylic



Note:Suitable for cavity ceilings with amaterial thickness of max.8-29 mm.


AIXLIGHT® PRO T5 FRAME Design by CDC 3.5230~88.5/15.5 18







Dimensions:Ø/H: 13.5/17-22.5 cm


Note:For Aixlight® Pro Frame andAixlight® Pro Frameless fittingframe.Module can be pulled 5.5 cmout of the housing.


QRB MODULE MOVE for Aixlight® Pro Design by CDC 0.4212~





Note:For Aixlight® Pro Frame andAixlight® Pro Frameless fittingframe.


QRB MODULE for Aixlight® Pro 0.2212~






ES111 MODULE for Aixlight® Pro 0.31230~





Note:For Aixlight® Pro Frame andAixlight® Pro Frameless fittingframe.Ballast and HV-cable see page646.


BRITESPOT ES111 MODULE for Aixlight® Pro 0.31

Socket/Lamp:E27/PAR30 (excl.)75W max.orE27/CDM-R (excl.)70W




Note:For Aixlight® Pro Frame andAixlight® Pro Frameless fittingframe.When using the lamp CDM-Ryou will need a ballast!Suitable ballasts and HV-cablesee page 646.


E27 MODULE for Aixlight® Pro 0.46230~

On pages 405-406 the illustrated modules areintended for fitting in the Aixlight® Pro fitting frame(see pages 400-402).The accessories shown on page 406 are suitablefor Aixlight® Pro module with exception the QRBmodule.

Application example:Aixlight® Pro II Frameless with QRB module Move.

180°

90°




Socket/Lamp:G12/CDM-T; HQI-T (excl.)35/70W




Note:For Aixlight® Pro Frame andAixlight® Pro Frameless fittingframe.Ballast and cables see page646.

Versions:silver grey 24° 115044silver grey 58° 115054silver grey 10° 115064

G12 MODULE for Aixlight® Pro 0.37

Socket/Lamp:E27/energy saver (excl.)max. Ø/L: 5.3/14.5 cm





ENERGY SAVER MODULE for Aixlight® Pro Design by CDC 0.43230~

Dimensions:Ø: 10.7 cm

Note:For Aixlight® Pro modules withthe exception of QRB-modules


STRUCTURE GLASS for Aixlight® Pro 0.081


Note:For Aixlight® Pro modules withthe exception of QRB-modules

Versions:glass yellow ▼ 115174glass green ▼ 115175glass blue ▼ 115177

DICHROIC FILTER for Aixlight® Pro 0.081

Application example left:QRB module Move with PowerLED QRB Lamp (550132) seepage 671.




Material:Steel



AIXLIGHT® PRO 50 FRAME I

Material:Steel



AIXLIGHT® PRO 50 FRAME II

Material:Steel



AIXLIGHT® PRO 50 FRAME III

Material:Steel

Dimensions:Visable L/W: 10.2/10.2 cmFitting frame-L/W/D: 12/17.5/5 cm


AIXLIGHT® PRO 50 FRAMELESS I Design by CDC

Material:Steel

Dimensions:Visable L/W: 18.8/10.2 cmFitting frame-L/W/D: 21/17.5/5 cm


AIXLIGHT® PRO 50 FRAMELESS II Design by CDC

0.771312.5/12.5

0.33138.5/8.5

0.451316/8.5

0.71323/8.5

1.091312.5/21



RECESSED FITTINGS | AIXLIGHT® PRO 50 409






MR16 MODULE for Aixlight® Pro 50 0.0112~





GU10 MODULE for Aixlight® Pro 50





Note:Electronic ballast and HV-cablesee page 646.


GX10 MODULE for Aixlight® Pro 50

0.01230~

0.01




RECESSED FITTINGS | MODULE FRAME410

Material:Steel



MODULE FRAME 1 Design by FGL 0.2

Material:Steel




Material:Steel




Choose the respective frame and the required number of modules.



RECESSED FITTINGS | MODULE FRAME 411


Material:Steel

Dimensions:Frontplate-L/W: 15/15 cm

Accessories/Included parts:VG (excl.)



G12 MODULE Design by FGL 0.542014.5 25°

Socket/Lamp:E27/CDM-R (excl.)70W

Material:Steel


Accessories/Included parts:VG (excl.)



CDM-R MODULE Design by FGL 0.617.514.5 25°


Material:Steel




QRB111 MODULE Design by FGL 0.612

12~14.5 25°



RECESSED FITTINGS | DOWNLIGHTS IP65412

DOWNLIGHTS





Versions:glass clearwhite 111011

chrome brushed 111018silver grey 111019

OUT 65 0.2412~137.2

IP65





Versions:alu naturalglass satin finish 111432

DORU 0.2712~12.56.6

IP65





Note:Not suitable for direct mirrorlamps.

Versions:alu brushed/lacqueredglass satin finish 111542

CALU 0.1512~12.56.6

IP65



RECESSED FITTINGS | DOWNLIGHTS IP65 413





Versions:alu naturalglass satin finish 111422

KONI 0.2412~12.56.6

IP65



Dimensions:Cover-B/L: 8.9/8.9 cm


Versions:glass satin finishwhite 111121

chrome 111122titanium 111127silver grey 111128

FGL OUT SQUARE 0.2312~137

IP65





Versions:glass satin finishwhite 111001

chrome 111002titanium 111007silver grey 111008

FGL OUT 0.2112~137

IP65



RECESSED FITTINGS | FIXED DOWNLIGHTS414


Material:Aluminium




SLIM MR16 Design by CDC 0.112~146.2


Material:Aluminium



SLIM GU10 Design by CDC 0.1230~146.2


Material:Aluminium




SLIM QRB111 Design by CDC 0.1212~1711.4


Material:Aluminium


Note:Not suited for DomeLED ES111lamp!


0.12230~1711.4

Socket/Lamp:GX53/GX53 (excl.)9W max.or LED GX53. 1.2W

Material:Aluminium



SLIM ENERGY SAVER GX53 Design by CDC 0.2230~158.8

SLIM ES111 Design by CDC



RECESSED FITTINGS | FIXED DOWNLIGHTS 415






DISC 0.3512~88.3


Material:Aluminium



Rear view Pikawhite (111181) Rear view Flat Downlight

white (111191)

Versions:white 111181silver grey 111189chrome 111182brass 111183

PIKA 0.0512~136






chrome matt 113317metal brushed 113318

LUZO 2 0.2212~1210.2 >50W


8


Material:Steel

Dimensions:Cover-Ø: 8.5 cmMax. wall thickness: 2.5 cm


FLAT DOWNLIGHT 0.1612~14 15°360°



Dimensions:Cover-Ø/H: 9.5/13 cm


Versions:chromeglass satin finish 111532

BAGUS 0.312~178.2

IP65



RECESSED FITTINGS | ADJUSTABLE DOWNLIGHTS416


Material:Aluminium




chrome 112092gold 112093titan 112097chrome matt 112098

MR16 SP 0.212~9.57.6 40°

Socket/Lamp:G4/MR11 (excl.)20W max.

Material:Aluminium




chrome 111052

MR11 SP 0.1512~9.55.7 40°

Rear view of the MR11 SPchrome (111052)

Rear view of the MR16 SPwhite (112091)


Material:Aluminium



Versions:white 111171silver grey 111179chrome 111172brass 111173

PIKA ADJUSTABLE 0.112~137.5 45°




Material:Aluminium

Dimensions:Cover-L/W: 8.7/8.7 cm



chrome 113202gold 113203titanium 113207chrome matt 113208

SQUARE 0.212~9.57.5 45°


Material:Aluminium




SWAN 0.212~

78.2 40°


Material:Glass




SATINA 0.512~810.5 350° 40°


Material:Aluminium




chrome 112062brass 112063titanium 112067matt chrome 112068silver grey 112069

AUSTRATURN 0.2312~109 350° 40°


Material:Aluminium




ALDOS 0.1512~107.2 45°

RECESSED FITTINGS | ADJUSTABLE DOWNLIGHTS 417





Material:Steel




chrome 112042gold 112043metal brushed 112048

EYEBALL MR16 0.1512~59.2 40°350°



419RECESSED FITTINGS | ADJUSTABLE DOWNLIGHTS


Material:Steel




chrome 112832gold 112833old brass 112834titanium 112837metal brushed 112838silver grey 112839

NEW TURNO MR16 0.112~

77.5 30°


Material:Steel



chrome 116102gold 116103chrome matt 116107

TURNO GU10 0.4230~148.3 15°


Material:Aluminium



chrome 116112titanium 116117chrome matt 116118

GU10 SP 0.4230~14.57.6 30°

Rear view GU10 SPsilver grey (116119)




Material:Aluminium




chrome 112152gold 112153chrome matt 112157titanium 112159

GIMBLE ROUND MR16 0.3612~129.5 90°350°

Socket/Lamp:GU6.5/CDM-TC (excl.)20/35W



Accessories/Included parts:Electronic ballast (excl.)Reflektor (excl.)

Note:For cavity ceiling with a materialthickness of 30 mm.


GIMBLE PRO GU6.5 0.51212 85°355°

RECESSED FITTINGS | ADJUSTABLE DOWNLIGHTS 421

IP40

Socket/Lamp:G12/HQI-T. CDM-T (excl.)35/70/150W




Note:Suitable for cavity ceilings with amaterial thickness of max. 40mm.


GIMBLE PRO G12 1.051517.6 85°355°

IP40

Material:Aluminium chromium-plated

Dimensions:162011 Ø/H: 6.65/4.2 cm162014 Ø/H: 6.65/3.75 cm

REFLECTOR for Gimble Pro GU6.5 0.01

Material:Aluminium chromium-plated

Dimensions:162031 Ø/H: 10.75/5.3 cm162034 Ø/H: 10.75/6.3 cm162036 Ø/H: 10.75/5.4 cm

Versions:20° 16203140° 16203470° 162036

REFLECTOR for Gimble Pro G12 Design by CDC 0.03

>50W

Versions:15° 16201140° 162014


422

Socket/Lamp:GX53/GX53 energy saver(excl.) 9W max.or LED GX53 1.2W (excl.)or PowerLED GX53.3x 1W (excl.)

Material:Plastic PC


Note:Fitting socket for PowerLEDGX53 and all standard GX53lamps.


FITTING RING for GX53 0.06230~8 8

Socket/Lamp:GX53/GX53 energy saver(excl.) 9W max.orGX53/LED GX53 (excl.)1.2W

Material:Aluminium

Dimensions:Cover-Ø/H: 9.3/4 cm


ALAIN Design by CDC/FGL 0.15230~

GX53 LED lamppage 674

GX53 lamppage 675



RECESSED FITTINGS | LED DOWNLIGHTS 423

Socket/Lamp:GU5.3/3in1 RGB PowerLED3x 1W

Material:Aluminium



Note:RGB lamp controllable withPower LIM® controllers(470523) and (470524).Max. 5 lamps per unit.The socket only serves asmechanical fixation of the lamp.

Note:To convert existing recessed installations to LED.Using a Power LIM® controller will allow coloursynchronisation.

Versions:silver/black 550450

MR16 RGB LED 30° with lens 0.05350mA

LED

3 pce.

30°

Socket/Lamp:GU5.3/3in1 RGB PowerLED3x 1W

Material:Aluminium



Note:RGB lamp controllable withPower LIM® controllers(470523) and (470524).Max. 5 lamps per unit.The socket only serves asmechanical fixation of the lamp.

Versions:silver/black 550451

MR16 RGB LED 120° frosted glass 0.05350mA

LED

3 pce.

120°

Dimensions:L: 50 cm

Note:Feed-in and Feed-back cablefor MR16 RGB LED.


FEED-IN/FEED-BACK

Dimensions:L: 100 cm

Note:Connector for the connection ofmax. 5 MR16 RGB LED.


CONNECTOR 350mA

350mA



RECESSED FITTINGS LED DOWNLIGHTS424



Dimensions:Cover-Ø/H: 3/0.5 cmConnection lead: 150 cm


Versions:silver metallicLED white 112241LED warm white 112242

0.04350mA

LED

1 pce. 2.5 1.5

45°

DEKLED


Material:Aluminium



Versions:Without plugwhite 118011chrome 118012gold 118013

LIGHT POINT 0.0512~32.6

Converted to LED techniqueby using the lamp G4 LEDSuper Flux (see page 668).Operate only with conventio-nal transformer.



425


Material:Aluminium

Dimensions:Visable: Ø/H: 4/1 cmConnection lead: 50 cm


Versions:alu brushedLED white ▼ 114841LED warm white ▼ 114842

LED KONVEX 0.05350mA

LED

1 pce. 3 2.5

25°


Material:Aluminium

Dimensions:L/W/H: 3/3/1 cmConnection lead: 18 cm


Versions:alu anodizedLED white ▼ 550551LED warm white ▼ 550552

SIXLED 0.02

LED

1 pce.

110°

RECESSED FITTINGS | LED DOWNLIGHTS


Material:Aluminium




NUBLED 0.02350mA

350mA

LED

1 pce.

30°


Material:Aluminium

Dimensions:Visable Ø/H: 4/1 cmConnection lead: 50 cm



LED KONKAV 0.05350mA

LED

1 pce. 3 2.5

120°



Dimensions:Ø/H: 3/5 cmConnection lead: 45 cm


Note:Focusable with a emitting angleof 15°- 30°.

Versions:silver metallic/blackLED white 111811LED warm white 111812

0.024350mA

LED

1 pce. 2.8 6

15°-30°

FOCU-LED DOWNLIGHT

Note:When connecting several of the 350mA opera-ting voltage items illustrated on this page pleaseuse a series connection!



RECESSED FITTINGS | LED DOWNLIGHTS426


Material:Aluminium



Note:Suitable connector strip forthrough wiring (111850)see page 643.


SIMIT 20° adjustable 0.07350mA

LED

1 pce. 4.9 6.5

20°30°

45°


Material:Aluminium

Dimensions:Cover-Ø/H: 5/4.8 cmHead-Ø/H: 5/1.6 cmConnection lead: 20 cm




RECESS CAN LED 0.08350mA

LED

1 pce. 4.3 3.8

70°

360°


Material:Steel

Dimensions:Ø/H: 6.7/5.8 cmConnection lead: 46.5 cm


Note:Focusable with a emitting angleof 15°- 30°.

Versions:silver metallic/blackLED white 111801LED warm white 111802

FOCU-LED EYEBALL 0.058350mA

LED

1 pce. 5.7 6.5

45° 15°-30°


Material:Aluminium





SIMIT 20° 0.05350mA

LED

1 pce. 3.5 6

20°

Note:When connecting several ofthe here illustrated productsplease use a series connec-tion!





Material:Aluminium




LED ALUMINIUM DOWNLIGHT 0.16700mA

LED

1 pce. 5.7 11

25°



RECESSED FITTINGS | LED DOWNLIGHTS428


Material:Aluminium




FURNITURE LED ROUND 0.056350mA

LED

3 pce. 6.7 2

45°


Material:Aluminium/ acrylic




FURNITURE LED ACRYLIC Design by CDC 0.12350mA

LED

3 pce. 6.7 2

45°

When connecting several of these illustrated products, please use aseries connection!





Material:Aluminium

Dimensions:Ø: 8 cmConnection lead: 30 cm


Note:Operate only with 350mA driver(eg. 464110) see page 643.Suitable connector strip(111850) see page 643Suitable for cavity walls and cei-lings with a material thickness ofmax. 20 mm!


TRITON LED 0.11350mA

LED

3 pce. 7 3.5

25°

60°

Lamp:RGB PowerLED (incl.)1x red, green, blue3x 1W

Material:Aluminium

Dimensions:Ø: 8 cmConnection lead: 30 cm

Accessories/Included parts:Controller (excl.)

Note:Controllable with PowerLIM®

(470523) see page 642.Suitable for cavity walls and cei-lings with a material thickness ofmax. 20 mm!

Versions:silver greyLED RGB 111853

TRITON LED RGB 0.19350mA

LED

3 pce. 7 9

35°

60°







Note:Suitable for cavity ceilings with amaterial thickness of max. 30mm.Recommended driver (464108)see page 643.

Versions:alu anodizedLED warm white 111992

EYEDOWN LED 6x1W 0.22350mALED

6 pce. 7.6 4.4





Note:Suitable for cavity ceilings with amaterial thickness of max. 30mm.Recommended driver (464108)see page 643.

Versions:alu anodizedLED warm white 111982

EYEDOWN LED 3x1W 0.12350mALED

3 pce. 5.9 3.7IP44

IP44


Note: When connecting several items shown onthis page please use a series connection!

Rear viewLED Horn


Material:Aluminium



Note:Recommended driver (464201)see page 643.


DomeLED DOWNLIGHT 0.28700mALED

6 pce. 10.8 7.5

25°

15°

15°


Material:Aluminium

Dimensions:Ø/H: 9.5/9 cmConnection lead: 50 cm


Note:Recommended driver (464201)see page 643.

Versions:aluLED white 112881LED warm white 112882

whiteLED white 112891LED warm white 112892

LED HORN 0.17700mALED

3 pce. 8.8



RECESSED FITTINGS | RECESSED LOUVRE FITTINGS 433

Socket/Lamp:G53/QRB111 (excl.)3x 50W max.and2G11/TC-L energy saver (excl.)2x 55W

Material:Steel


Accessories/Included parts:Electronic ballast (incl.)Electronic transformer (incl.)

Note:For grid ceilings 60 x 60 cm.


Louvre fitting adapterTo mount in 62 x 62 cmgrid ceilings 158110

LOUVRE FITTING QRB/TCL 7.052012~

230~


Material:Steel



Note:For grid ceilings 60 x 60 cm.



LOUVRE FITTING LOBANG 5.613

20

230~


Material:Acrylic/steel

Dimensions:Fitting-L/W/H:64.5/64/11.5 cmAcrylic plate-L/W: 64/64 cmDistance ceiling plate: 2 cm max.


Note:For grid ceilings 60 x 60 cm.With a height adjustable acrylicdiffuser plate.



LOUVRE FITTING BIG PAN Design by CDC 5.0230~

After loosening the screw, thediffuser plate can be adjustedapprox. 2 cm in height.




Lamp:GU6.5/CMH-TC20/35W


Dimensions:Ø/H: 11/11.5

Accessories/Included parts:Deco ring (incl.)Electronic ballast (excl.)Frame (excl.)Reflector (excl.)


chrome 112962

CMH DOWNLIGHTS GU6.5 0.38

Material:Aluminium


Note:Suitable for cavity ceilings with amaterial thickness till max. 25mm.Mounting dimensions measuredwith mounted lamp.


CMH DOWNLIGHTS 1FRAME round 0.1113.5

10

11

0.1313.5 11

0.2611

0.2911

Material:Aluminium


Note:For cavity ceilings with a materi-al thickness till max. 25 mm.Mounting dimensions measuredwith mounted lamp.


CMH DOWNLIGHTS 2 FRAME round

Material:Aluminium




CMH DOWNLIGHTS 1 FRAME square

Material:Aluminium




CMH DOWNLIGHTS 2 FRAME square

28/13.5

28/13.5

Reflectors for CMH-Spotspage 193



RECESSED FITTINGS | DOWNLIGHTS 435





Material:Steel



chrome 113002

LIGHTEYE TUBE ES111 Downlight Design by CDC 0.75230~1617


Material:Steel



Note:Electronic ballast and HV-cablesee page 646.


chrome 113022

LIGHTEYE TUBE BRITESPOT ES111 Downlight Design by CDC 0.751617


Material:Steel




chrome 113012

LIGHTEYE TUBE QRB111 Downlight Design by CDC 0.7512~1617




438 RECESSED FITTINGS | DOWNLIGHTS


Material:Aluminium


Accessories/Included parts:Electronic ballast (excl.)Reflector (excl.)

Note:For cavity ceilings with a materi-al thickness up to max. 30 mm.Reflector see page 439.


BERET GU6.5 Downlight 0.371313

Accessories/Included parts:Ballast (excl.)Reflector (excl.)

Note:For cavity ceilings with a materi-al thickness up to max. 40 mm.Reflector see page 439.


BERET G12 Downlight 0.915.515.2

Socket/Lamp:G12/HQI-T; CDM-T (excl.)35/70/150W max.

Material:Aluminium


30°

30°

Socket/Lamp:G12/CDM-T; HQI-T (excl.)35/70W

Material:Steel

Dimensions:Lamp-Ø/H: 17/20 cmVisable H: max. 6.5 cm(extracted condition)max. ceiling thickness: 3 cm


Note:Suitable ballast(eg. 470070) and HV-cablesee page 646.Numerous fixation postions:inboard (ceiling level) extracted(max. 6 cm) with 30° swivelrange.


Rear view BeretGU6.5 Downlight.silver grey(162144)

HORN ADJUST Design by CDC 0.92016

100°

Rear view Horn Adjust(112944)

>70W





Material:Aluminium



Note:For cavity ceilings with a materi-al thickness of max. 30 mm.


DIVIS GU6.5 Downlight 0.341210.5

Accessories/Included parts:Ballast (excl.)Reflektor (excl.)



DIVIS G12 Downlight 0.481513

Socket/Lamp:G12/HQI-T; CDM-T (excl.)35/70/150W

Material:Aluminium



Note:For cavity ceilings with a materi-al thickness till max. 40 mm.


DIVIS G12 Downlight deep 0.782419


Material:Aluminium





DIVIS GU6.5 Downlight deep 0.6215.514.8

Socket/Lamp:G12/HQI-T; CDM-T (excl.)35/70/150W

Material:Aluminium


Versions:16° 16216170° 162166

REFLECTOR for Beret and Divis GU6.5 Downlight 0.02

Material:Aluminium chrome plated

Dimensions:162161 Ø/H: 8.8/4.2 cm162166 Ø/H: 8.8/4.2 cm

Versions:20° 16217140° 16217370° 162176

REFLECTOR for Beret and Divis G12 Downlight 0.3


Dimensions:162171 Ø/H: 11.3/5.3 cm162173 Ø/H: 11.3/6.3 cm162176 Ø/H: 11.3/5.3 cm

>70W

>70W





Material:Steel



Versions:matt white 112931

HORN QRB111 0.312~12.516.2


Material:Steel



HORN ES111 0.3230~12.516.2


Socket/Lamp:GU10/ES111 (excl.)50W max.and2GX13/T5-Ring energy saver (excl.)22W

Material:Plastic PC



Note:ES111 Lamp and T5-Ring areindividually switchable


TROMP Downlight Design by CDC 1.4230~1630.5





Material:Steel




HORN MR16 0.1212~11.57.5


Material:Steel



HORN GU10 0.13230~11.57.5



Socket/Lamp:G24d-3/TC-D 2-pin energy saver (excl.)2x 26W


Dimensions:Ø/W/H: 23/24/15 cmBallast L/W/H: 20/13/5 cm


Note:Ballast in external housing.

Versions:white ▼ 160081silver grey ▼ 160089

DIGO 2x 26W 2.5230~1420.5

Socket/Lamp:G24q-2/TC-DE 4-pin energy saver (excl.)2x 18W


Dimensions:Ø/W/H: 23/24/15 cm



DIGO 2x 18W ELECTRONIC BALLAST 1.12230~1420.5



Dimensions:Ø/W/H: 23/24/15 cm



DIGO 2x 26W ELECTRONIC BALLAST 1.12230~1420.5




Socket/Lamp:G24q-3/TC-DE energy saver (incl.)2x 26W


Dimensions:Cover-Ø: 23 cm.Housing-L/W/H: 30/19/14 cm

Accessories/Included parts:Osram electronic ballast (incl.)Darklight louvre (incl.)2x Lamp 3000K (incl.)


RAPIDO 2x 26W ELECTRONIC BALLAST 0.8230~1421.5


Material:Plastic PC

Dimensions:Ø/L/H: 20.5/35/13.5 cmCeiling thickness: 0.5-3.5 cm

Accessories/Included parts:Ballast (incl.)Louvre (incl.)


PLADO 1x 18W 1.37230~13.519


Material:Plastic PC




PLADO 2x 18W 2.0230~13.519


Material:Plastic PC




PLADO 1x 26W 1.37230~13.519


Material:Plastic PC




PLADO 2x 26W 2.0230~13.519

Socket/Lamp:E27/energy saver (excl.)till max. Ø/L: 5.2/17.5 cm

Material:Steel

Dimensions:Ø/D: 14.5/17 cm

Versions:white 152561chrome 152562silber 152564

ELT DOWNLIGHT 0.35230~1712.7






Dimensions:Ø/H/L: 20/11.5/36 cm


Note:Suitable for cavity ceilings with amaterial thickness till max. 35 mm.


ESSENS 18/2 FLAT 1.019.2 11.5

230~

Socket/Lamp:G24q-2/TC-DE 4-pin energy saver (excl.)18W






ESSENS 18/1 FLAT 1.019.2 11.5

230~







ESSENS 13/2 FLAT 1.019.2 11.5

230~







ESSENS 26/2 FLAT 1.019.2 11.5

230~

Socket/Lamp:G24q-3/TC-DE 4-pin energy saver (excl.)26W






ESSENS 26/1 FLAT 1.019.2 11.5

230~



447RECESSED FITTINGS | DOWNLIGHTS





Note:Suitable for cavity ceilings with amaterial thickness of max. 35 mm.


ESSENS 18/2 DEEP 1.419.2 15.5

230~





Note:Suitable for cavity ceilings with amaterial thickness of max. 35 mm.


ESSENS 26/2 DEEP 1.419.2 15.5

230~






Dimensions:Cover-L/B: 23.5/23.5 cm


Versions:white 160021grey 160029

Energy saving lamp 4-pin26W 3000K 50822226W 4000K 508322

QUOR 52 ELECTRONIC BALLAST 1.5230~1321/21





Versions:Glass satin finishwhite 160041silver grey 160049

KOTAK ELECTRONIC BALLAST 1.4230~1418.8/18.8






Dimensions:Glass-L/W: 25/25 cmCover-H: 3 cm


Versions:whiteGlass satin finish 160022


QUOR 52/G ELECTRONIC BALLAST glass satin finish 1.5230~1321/21



Dimensions:Glass-L/W: 25/25 cmCover-H: 3 cm




QUOR 52/G ELECTRONIC BALLAST glass partial satin finish 1.5230~1321/21



450 RECESSED FITTINGS | DOWNLIGHTS


Dimensions:Product-Ø/H: 13.7/8.5 cm

Versions:15° 16223125° 16223240° 162233

REFLECTOR for EVO HQI Downlight 0.08

Socket/Lamp:G12/HQI-T; CDM-T (excl.)35/70/150WMaterial:Aluminium





EVO G12 DOWNLIGHT 0.5715.514.8



Dimensions:Ø/H: 20/12 cm (round)



Versions:roundwhite 162301silver grey 162304

ESSENS HQI 70W 0.681218.5







ESSENS HQI 150W 0.7215.522.5

Rear view of Essens HQIwhite (162301)

>70W



451RECESSED FITTINGS | DOWNLIGHTS





Note:Suitable ballast and HV-connec-tion lead see page 646.


QUOR 70 HQI 1.11420/20





Note:Suitable ballast and HV-connec-tion lead see page 646.Reflector with asymmetrical lightemittion.


QUOR 70 HQI asymmetrical 1.11620/20





Material:Aluminium

Dimensions:W/L/D: 14.5/23/13 cm



Energy saving lamp TC-DE 4-pin13W 3000K 50821213W 4000K 508312

TC DL 2x 13W ELECTRONIC BALLAST 1.5230~1212.5/21 75°


Material:Aluminium




Energy saving lamp TC-DE 4-pin26W 3000K 50822226W 4000K 508322

TC DL 2x 26W ELECTRONIC BALLAST 2.1230~18.526/19.5 65°





Material:Aluminium

Dimensions:W/D/L: 14.5/23/13 cm


Note:Suitable accessories like ballastand cable see page 646.


HQI-TS DL 70 1.01212.5/21 75°

Socket/Lamp:Rx7s/HQI-TS: CDM-TS (excl.)150W

Material:Aluminium

Dimensions:W/D/L: 14.5/23/13 cm


Note:Suitable accessories like ballastand cable see page 646.


HQI-TS DL 150 1.01212.5/21 75°




Lamp:PowerLED (incl.)18x 1W total


Dimensions:L/W/D: 20/20/14.5 cm


Versions:silver greyLED white ▼ 111861

KOTAK 18 LED 1.45

LED

18 pce. 14mA

350

230~

18/18

0.2

LED

100 pce 514/14230~


Material:Plastic



LEDPanel 100120°



RECESSED FITTINGS | GROUND RECESSED FITTINGS456



RECESSED FITTINGS | GROUND RECESSED FITTINGS 457

Lamp:SMD LED (incl.)0.5W total

Material:Aluminium/artificial resin

Dimensions:Cover-Ø/H: 5.5/1 cmConnection lead-L: 2 m


Note:Can be walked on.Only suitable for cavity wall andceiling installations!Operate only with conventionaltransformer!


LED SLIM LIGHT recessed 0.0412~

LED

9 pce. 4.55 1.2IP67

Lamp:SMD LED (incl.)0.5W total

Material:Aluminium/artificial resin

Dimensions:Cover-Ø/H: 6/1 cmConnection lead-L: 2 m


Note:Can be walked on.Operate only with conventionaltransformer!


LED SLIM LIGHT flush mount 0.0512~

LED

9 pce.IP67



458

POWER TRAIL-LITE see page 580

TRAIL-LITE see page 580

Details for indoor and outdoor applications of this recessed fixture can befound in the outdoor chapter.

N-TIC see pages 586-587

WETSY POWER LED see page 589

WETSY LED 230V see page 589

RECESSED FITTINGS | GROUND RECESSED FITTINGS



LED PLOT SQUARE see page 578

459

LED SKY PLOT see page 578

Details to these in indoor and outdoor applicable recessed lamps can befound in our outdoor chapter.

WETSY see page 589

LED PLOT ROUND see page 578

AQUADOWN MICRO see page 579

RECESSED FITTINGS | GROUND RECESSED FITTINGS


big white catalog_2010

Documents

floor fittings

uhr seite

lamps led

ceiling fittings

apollo low voltage track

phase track

led accessories

cupboard fittings