BIOGRAPHICAL INFORMATION

LEON M. KEER

CITIZENSHIP

U.S.A.

EDUCATION

1952-58 California Institute of Technology, Mechanical Engineering1959-62 University of Minnesota, Aeronautics and Engineering

Mechanics

DEGREES

B.S. 1956 California Institute of Technology, Engineering, academichonor

M.S. 1958 California Institute of Technology, Mechanical EngineeringPh.D. 1962 University of Minnesota (Dissertation with L.E. Goodman, “The

Contact Stress Problem for Elastically Identical Spheres")

ACADEMIC CAREER

1959-62 Research Fellow, University of Minnesota1962-63 NATO Postdoctoral Fellow, University of Newcastle upon Tyne,England1963-64 Preceptor, Columbia University, New York1964-66 Assistant Professor of Civil Eng., Northwestern University1966-70 Associate Professor of Civil Eng., Northwestern University1970-85 Professor of Civil Engineering, Northwestern University1972-73 Guggenheim Fellow, Department of Mathematics, University of Glasgow,

Scotland1985–92 Professor of Civil and Mechanical Engineering and Associate Dean for Research

and Graduate Study, Northwestern University1992- Professor and Chairman, Department of Civil Engineering, Northwestern

University1994- Walter P. Murphy Professor of Civil Engineering

HONORS AND AWARDS

1962-63 NATO Postdoctoral Fellow1972-73 John Simon Guggenheim Memorial Fellow1983 Fellow, American Academy of Mechanics1984 Fellow, American Society of Mechanical Engineers1986 Japan Society for the Promotion of Science Fellow, Tohoku University, Japan1988 Fellow, American Society of Civil Engineers

1

1994- Walter P. Murphy Professor of Civil Engineering1997 Elected to National Academy of Engineering2000 Selected as 1st Chau Wai-yin Lecturer at the Hong Kong Polytechnic University2001 Innovative Research Award, Tribology Division, ASME2002 Fellow, Acoustical Society of America2003 ASME Daniel C. Drucker Medal

VISITING POSITIONS (Short Term)

1968 Member of International Research Seminar on Continuum Mechanics and Related Numerical Analysis, University of Calgary, Alberta, June 15-July 30

1975 Senior Visiting Fellow, Department of Mathematics, University of Glasgow, 1-31 May

1986 JSPS Fellow, Tohoku University, Sendai, Japan, 12 July-17 August1992 Department of Engineering, University of Cambridge, England, 9 May-12 July

VISITING POSITIONS (Long Term)

1962-63 Department of Mathematics, University of Newcastle upon Tyne (NATO Fellow)

1963-64 Department of Civil Engineering, Columbia University, New York (Preceptor)1972-73 Department of Mathematics, University of Glasgow (Guggenheim Fellow)

EDITORIAL RESPONSIBILITIES

Journal of the Engineering Mechanics Division (ASCE)Associate Editor (Elasticity) 1977-79; 1987-89

Journal of Applied Mechanics (ASME)Associate Editor 1987-88Technical Editor Jan. 1988-Dec. 1992

ADMINISTRATIVE RESPONSIBILITIES

Associate Dean for Research and Graduate Study,McCormick School of Engineering and Applied Science, 1985 -- 1992.

Chairman, Department of Civil Engineering, September 1992 -- 1997Director, Center for Surface Engineering and Tribology, 1998 --

INDUSTRIAL EXPERIENCE

2

1956-59 Member of the Technical Staff, Hughes Aircraft Company

PROFESSIONAL SOCIETIES AND REGISTRATION

American Society of Mechanical Engineers (618744), fellowSkokie Subsection of American Society of Mechanical Engineers Chairman,1978-79;Chicago Section of American Society of Mechanical Engineers,

Vice Chairman/Chairman-Elect, 1986-87; Chairman, 1987-88.ASME Gear Research Institute, Advisory Board MemberChairman, Transactions Board of Editors, ASME, 1993-97 Member-at-Large, Board on Communications, ASME, 1993-97

Acoustical Society of America, fellowChicago Regional Chapter of the Acoustical Society of America, founding

member and formerly on Executive Committee holding positions of Vice-Chairman and Chairman

American Society of Civil Engineers (00147712), fellowEngineering Mechanics Division (Vice Chairman of Elasticity Committee1976-77; Chairman 1977-79; Vice Chairman of Elasticity Committee 1986-87; Chairman 1987-89)1991-94; Member of the Executive Committee (Chairman, 1992-93)

American Academy of Mechanics, fellowSecretary 1981-1987, President-Elect 1987-88, President 1988-89

Sigma Xi, Northwestern University ChapterPresident, 1976-77; 1987-88

Registered Professional Engineer -- California (ME-11950)

AGENCY ADMINISTRATIVE ACTIVITIES

National Science FoundationService on the following NSF panels for proposal evaluation:Solid Mechanics Program; Mechanical Systems Program; Graduate Engineering Education for Women, Minorities and/or Persons with Disabilities; Graduate Fellowship Program, Mechanics and Materials Program

Institute for Mechanics and Materials, Member of Board of Governors, 1992-97

Chairman, Doctoral Evaluation Project, The Watson School of the State University of New York at Binghamton. Evaluation of doctoral programs in Electrical, Mechanical and IndustrialEngineering. Conducted under the auspices of the University of the State of New York.

Departmental Academic Advisor, Department of Civil and Structural Engineering, the Hong Kong Polytechnic University, Kowloon, 1999-2002

3

COURSES TAUGHT DURING CAREER

Ordinary Differential Equations (Columbia University)Mechanics I and IIMechanics of Materials I and IIContinuum MechanicsIntermediate MechanicsMechanics of Deformable Solids IContinuum Theory of FractureTensors in MechanicsPlates and ShellsStability of StructuresDynamics of StructuresElasticity I and IIVibration of Continua

TECHNOLOGICAL INSTITUTE COMMITTEES

Library CommitteeAcademic Standing CommitteeCurriculum CommitteeResearch Committee (ex officio)Honors Program

Industrial RelationsPromotion and TenureCommittee on Committees

UNIVERSITY COMMITTEES

Klopsteg Lecture Committee (Chairman)Scholarship and Fellowship CommitteeTravel Policies CommitteeAdministrative Board of the Graduate SchoolProgram Review of the Administration of the Medical School (Committee member)Research Support Facilities Working Group

CONSULTING

Borg-Warner Corporation, Des Plaines, ILIsham, Lincoln and Beale, Chicago, ILSandia Laboratories, Albuquerque, NMInterlake, Inc., Chicago, ILTimkin Co., Canton, OHSKF Industries, Netherlands

4

General Motors, Detroit, MI

HONORARY SOCIETIES

Tau Beta PiSigma Xi

RESEARCH GRANTS DURING CAREER

Contact Stress and Crack Problems in the Mathematical Theory of Elasticity, U.S. Army Research Office -- Durham

Dynamic Response of Structure-Foundation Systems to Earthquake Motion, National Science Foundation (S.L. Lee and R.A. Parmelee are co-principal investigators)

Fracture and Debonding of Composite Structures, National Science Foundation

Heat Extraction from Hot, Dry Rock Masses, National Science Foundation/RANN (Co-investigator with T. Mura)

Three-Dimensional Stress Singularities in Cracked Elastic Solids, Air Force Office of Scientific Research (Co-investigator with Z.P. Bazant)

Theory of Stability Applied to Fracture, National Science Foundation (with S. Nemat-Nasser)

Hot, Dry Rock Reservoir Characterization and Modeling, Los Alamos Scientific Laboratories (with J.D. Achenbach, Z.P. Bazant, J. Dundurs, T. Mura, S. Nemat-Nasser, J. Weertman)

Mechanics of Surface Damage in Elastohydrodynamic Contacts, Army Research Office (with H. Cheng)

Contact Stress Analysis for the Continuously Variable Transmission-Traction Drive, National Science Foundation (with T. Mura)

An Analytical Model for Prediction of Surface Pitting Life in Spur and Helical Gears, National Science Foundation (with H. Cheng, T. Mura)

Mechanical Failure of Cancellous Bone/PMMA Interface, National Science Foundation (with J.L. Lewis)

Dynamic Impact of Structures--Global-Local Approach, Air Force Office of Scientific Research

Research into Fluid Penetration of Rock Interfaces by Hydraulic Fracturing, Halliburton Services

Failure Analysis of Composite Materials, Wright Patterson Air Force Base

5

Analytical Models for Nonlinear Soil Structure Interaction (with T. B. Belytschko) National Science Foundation

Center for Engineering Tribology (H.S. Cheng, Director with L.M. Keer and Y.W. Chung). Supported by 18 industrial firms and National Science Foundation

Thermal Fatigue of 97% Pb - 3% Sn Solder and Solder Joints (with M.E. Fine) IBM

The Formation of a Detail Fracture from a Shelling Fracture, Association of American Railroads

Ceramics and Advanced Composite Materials - Tribology, Chrysler (with H. Cheng and M.E. Fine)

Mechanical Failure of Cancellous Bone/PMMA Interface, University of Minnesota

Fatigue Crack Analysis, Association of American Railroads

Thermomechanical Properties of Thin Film Al-2 wt.% Cu., (with Y.W. Chung, J.B. Cohen and M.E. Fine) IBM

Heterogeneous Characterization of Composite Materials with Progressive Damage, Air Force Office of Scientific Research, (with I.M. Daniel and J.D. Achenbach)

Degradation of Low Cycle Fatigue, IBM (with M.E. Fine)

Dynamic Response of Embedded Structures, Air Force Office of Scientific Research (with S.P. Shah)

Simulation of Ultrasonic Submersion Test, Air Force Office of Scientific Research

Accurate Three–Dimensional Calculations for Advancing Slip Zones in Earth's Crust, National Science Foundation, US Geological Survey, (with J. Rudnicki)

Residual Stress Analysis of Rails, Association of American Railroads

Prediction of Crack Initiation Life in Contact Fatigue, National Science Foundation, (with T. Mura and H. S. Cheng)

Accelerated Test Methodology for SMT Solder Joints, IBM (with M.E. Fine)

Life Prediction of Surface Modified Tribological Materials, National Science Foundation, (with H.S. Cheng)

Submicrometer Contaminant Particle Generation by Wear, IBM (with H.S. Cheng)

High Temperature Hetrogeneous Materials, Air Force Office of Scientific Research, URI, (with K.T. Faber, B. Moran and J. Weertman)

6

Graduate Engineeering Education for Women, Minorities and/or Persons with Disabilities, National Science Foundation

Microhole Drill Drilling of Printed Circuit Boards, IBM Corporation

Residual Stress and Fracture Analysis, Association of American Railroads

Simulation of Ultrasonic Submersion Test for Layered Anisotropic Plates, AFOSR

Fracture Mechanics of Articular Cartilage, University of Minnesota ( subcontract), National Science Foundation

Three Dimensional Stress Drop Models for Slip Zones in the Earth's Crust, National Science Foundation (with J. W. Rudnicki)

Fundamental Investigations in Microtribology, National Science Foundation, National ScienceFoundation (Center for Engineering Tribology tie project with Sensors and Actuators Center - University of California at Berkeley)

US-UK Cooperative Research (Theories for Coatings and Thin Films), National Science Foundation (Travel Grant)

Fatigue Data Base and Reliability Modeling of Lead-Free Solders , Semiconductor Research Corporation, (with M. E. Fine)

Three-Dimensional Modelling of Hydraulic Fracturing, Amoco

Development of Three-Dimensional Contact Fatigue Model: Coalescence of Multiple Cracks and Residual Stresses, Eaton Corporation.

Engineering Surfaces for Rolling and Sliding Contacts , subcontracted through Caterpillar Inc. on Advanced Technology Program. (with H.-S. Cheng)

Prediction of the Fatigue Failure of Unbalanced Magnetron Sputtered Diamond-like Carbon Coated Rollers in Combined Rolling/Sliding Contact, National Science Foundation

Investigation of Improved Reliability Solder Interconnects in Electronic Devices, Semiconductor Research Corporation, (with M.E. Fine and B. Moran).

Effects of Material Nonuniformity on Earthquake Faulting, National Science Foundation

New Coating Structures for Enhanced Tribological Performance, National Science Foundation, (with Y.-W. Chung)Research into Chemical Mechanical Polishing, Center for Surface Engineering and Tribology and National Science Foundation.

Currently active grants7

Industry University Cooperative Research Center for Surface Engineering and Tribology (IUCRC), Center Co-Director with S. Danyluk of Georgia Institute of Technology.

Constitutive and Damage Model for Solders, Semiconductor Research Corporation (Customized project sponsored by Advanced Micro Devices)

Functionally Graded Nanocoatings for Dry Machining, National Science Foundation (Y.-W. Chung, K. Ehmann)

US-Tunisia Cooperative Research in Functionally Graded Materials, National Science foundation

Ford Gift for Research in Tribology and Lubrication (with Q. Wang)

IGERT: On a Virtual Tribology System, National Science Foundation (Four PI collaborate with grant)

8

VISITING SCHOLARS

R. Khadem Department of Mathematics, University of Southampton andLaval University, 1970-71

L.E. Goodman Department of Civil Engineering, University of Minnesota,Spring, 1974

K.S. Parihar Department of Mathematics, IIT Bombay, 1976-77

Z.A. Moschovidis Department of Civil Engineering, Ph.D. from Northwestern University, 1976-77

A. Oranratnachai Department of Civil Engineering, Ph.D. from Northwestern University, 1979-80

Y. Sumi Department of Civil Engineering, Yokohama University, 1978-80, 1982 (two months)

B. Karihaloo Department of Civil Engineering, University of Newcastle, New South Wales, 1978-79

N. Hasebe Nagoya Institute of Technology, 1981-82

E. Mastrojannis University of Patras, 1982 (two months) and 1985 (one month)

Jiaju Ma People's Republic of China, 1981-83

G.K. Haritos Air Force Institute of Technology, 1982 (one month)

J.C. Lee Department of Civil Engineering, Ph.D. from Northwestern University, 1983-85

J.P. Clech Department of Civil Engineering, Ph.D. from Northwestern University (three months)

W. Lin Department of Civil Engineering, Ph.D. from Northwestern University, 1985-93

A. Zubelewicz Department of Civil Engineering, Ph.D. from Technical University of Warsaw, 1986-1989

M.P. Robert Department of Civil Engineering, Ph.D. from Northwestern University, 1987 (three months)

T. Goshima Toyama University, Toyama Japan, March-January 1988.

9

A.C. Wijeyewickrema Department of Civil Engineering, Ph.D. from Northwestern University, 1988-present

X. Li Department of Civil Engineering, Ph.D. from Tongji University, People's Republic of China, 1989-92

Y. Xu Department of Civil Engineering, Ph.D. from Northwestern University, 1989-94

M. Wu Department of Civil Engineering, Ph.D. from the University of Wisconsin-Madison, 1989-91

N. Hasebe Nagoya Institute of Technology, June 1990

Y. Nagase Shizuoka University, Hamamatsu, 432 Japan, 1991-92 (ten months)

M. Abe Nagaoka University of Technology, Nagaoka 940-21 Japan, 1992-93

Niels B. Thomsen The University of Sydney, Sydney, Australia, 1993 (two months)

H. W. Rhee Kyungnam University, Kyungnam, Korea, 1994-95 (twelve months)

C. H. Kuo Department of Civil Engineering, Ph.D. fromNorthwestern University, 1994-present

C. Sakae Kyushu University, Department of Mechanical Engineering, 1995-96(twelve months)

O. Chekina Moscow University;, Department of Mechanical Engineering, 1996-97 (twelve months)

I. Polonsky Northwestern University, Department of Civil Engineering, 1996—

H. Zenzri Departement de Genie Civil. Ecole Nationale d'Ingenieurs de Tunis, 1999.

S. El-Borgi Departement de Genie Civil. Ecole Nationale d'Ingenieurs de Tunis, 2000.

F. Borodich Northwestern University, Visiting Professor, 2001-

GRADUATE STUDENTS ADVISED (Date degree awarded)

Ph.D. Students Degree Date M.S. Students Degree Date

N.J. Freeman August, 1966 H.P. Doehler June, 1969W.S. Fu August, 1967 A.H. Elliott June, 1969

10

M.J. Sagartz August, 1967 K. Chantaramungkorn December,1971P. Karasudhi June, 1968 V.K. Luk June, 1975C. Sve August, 1968 E.N. Mastrojannis June, 1976M.A.G. Silva June, 1969 D.A. Mendelsohn June, 1976B. Stahl June, 1971 D.B. Mowry June, 1978J.M. Freedman June, 1971 C.Y. Kuo August, 1980K. Chantaramungkorn June, 1974 C. Sa August, 1981W.C. Luong June, 1975 G.R. Miller August, 1981E.N. Mastrojannis June, 1978 R. Ballarini August, 1981G.K. Haritos August, 1978 J.P. Clech June, 1982V.K. Luk August, 1978 P.R. Micheli June, 1983A. Oranratnachai August, 1979 W. Lin June, 1983S.H. Chen August, 1979 H. DeLaage August, 1983A.F. Mak August, 1980 T.N. Farris June, 1984D.A. Mendelsohn June, 1980 D. Koutsibelis June, 1985M.D. Bryant August, 1981 S.H. Kim June, 1985K.P. Meade June, 1982 M.M.–H. Yu June, 1988N. Ahmadi June, 1982 A. D'Sylva June, 1990J.C. Lee June, 1983 K. Nakayama June, 1996G.R. Miller June, 1984 J. Chin June, 1997R. Ballarini June, 1985J.P. Clech June, 1985W. Lin June, 1985P.D. Copp June, 1986T.N. Farris June, 1987M.H. Santare June, 1987W.P. Schonberg June, 1987M.P. Robert June, 1987S. H. Kim June, 1988A.C. Wijeyewickrema June, 1988V. Vithoontien June, 1989M.T. Hanson June, 1989V.M. Gharpuray June, 1990A. Eberhardt June, 1991Q. Guo June, 1991A. DancygierW.R. ChenM.M.-H. YuC.H. KuoM. JeykumaranT. A. HomulkaC.C. YuI. PolonskyV. StolkartsS. WenM.J. Rodgers

August, 1991June, 1992June, 1992August, 1992June, 1994December, 1994June, 1995June, 1996December, 1999June, 2001June, 2001

11

D. Epstein June, 2004C.S. Korach June, 2005X. Jin June, 2006F. Wang June, 2006

BOOKS

H.S. Cheng and L.M. Keer, (1980) Solid Contact and Lubrication, American Society of Mechanical Engineers (special publication).

BOOK REVIEWS

Elasticity by R.W. Little, Prentice-Hall (1973) in Journal of Applied Mechanics,41, 1974, p. 7.Contact Mechanics and Wear of Rail/Wheel Systems, Ed. by J. Kalousek, R.V. Durripati,

G.M.L. Gladwell, Proc., Int. Symposium. University of British Columbia, (1982) in Journal of Applied Mechanics, 51, pp. 225-226.

Contact Mechanics, by K. L. Johnson, Cambridge University, (1985) in SIAM Review, 28, 1987, p. 332.

Dislocation Based Fracture Mechanics, World Scientific, (1997) by J. Weertman in Journal of Applied Mechanics, in press.

Solution of Crack Problems, Kluwer Academic Publishers, (1997) by D.A. Hills, P.A. Kelly, D.N. Dai and A.M. Korsunsky, in Journal of Applied Mechanics, in press.

12

PUBLICATIONS

1960

Himelblau, H. and Keer, L.M., “Space Requirements for Simple Mechanical Systems Excited by Random Vibration”, Journal of the Acoustical Society of America, 32, (1960), pp. 76-80.

1964

Keer, L.M., “The Contact Stress Problem for an Elastic Sphere Indenting an Elastic Layer”, Journal of Applied Mechanics, 31, (1964), pp. 143-145.

Keer, L.M., “The Torsion of a Rigid Punch in Contact with an Elastic Layer Where the Friction Law is Arbitrary”, Journal of Applied Mechanics, 31, (1964), pp. 430-434.

Keer, L.M., “Stress Distribution at the Edge of an Equilibrium Crack”, Journal of the Mechanics and Physics of Solids, 12, (1964), pp. 149-163.

Keer, L.M., “A Class of Non-Symmetrical Punch and Crack Problems”, Quarterly Journal of Mechanics and Applied Mathematics, 17, (1964), pp. 424-436.

1965

Keer, L.M., “A Note on the Solution for Two Asymmetric Boundary Value Problems”, International Journal of Solids and Structures, 1, (1965), pp. 257-264.

Keer, L.M., “Nonaxisymmetric Punch and Crack Problems for Initially Stressed Bodies”, Quarterly Applied Mathematics, 23, (1965), pp. 97-107.

Goodman, L.E. and Keer, L.M., “The Contact Stress Problem for an Elastic Sphere Indenting an Elastic Cavity”, International Journal of Solids and Structures, 1, (1965), pp. 407-415.

Keer, L.M. and Mura, T., “Stationary Crack and Continuous Distribution of Dislocations”, Proceedings of International Conference on Fracture, 1, (1965), pp. 99-115.

1966

Keer, L.M., “A Note on Shear and Combined Loading for a Penny-Shaped Crack”, Journal of the Mechanics and Physics of Solids, 14, (1966), p. 2.

1967

13

Allentuch, A. and Keer, L.M., “Forced Torsional Oscillations of a Penny-Shaped Crack”, in Recent Advances in Engineering Science, 2, edited by A.C. Eringen, Proceedings of the Second Technical Meeting of the Society of Engineering Science, Gordon and Breach, New York, 1967.

Keer, L.M., Fleming, J.F., and Herrmann, G., “Transient Response of a Shell in Plane Strain”, Journal of the Acoustical Society of America, 41, (1967), pp. 358-368.

Keer, L.M., “Mixed Boundary Value Problems for an Elastic Half-Space”, Proceedings of the Cambridge Philosophical Society, 63, (1967), pp. 1379-1386.

Freeman, N.J. and Keer, L.M., “Torsion of Elastic Cylinders in Contact”, International Journal of Solids and Structures, 3, (1967), pp. 799-808.

Freeman, N.J. and Keer, L.M., ”Torsion of a Cylindrical Rod Welded to an Elastic Half-Space”, Journal of Applied Mechanics, 34, (1967), pp. 687-692.

Keer, L.M. and Fu, W.S., ”Some Stress Distributions in an Elastic Plate Due to Rigid Heated Punches”, International Journal of Engineering Sciences, 5, (1967), pp. 555-570.

1968

Keer, L.M., “Coupled Pairs of Dual Integral Equations”, Quarterly Applied Mathematics, 25, (1968), pp. 453-457.

Sagartz, M.J., Keer, L.M., and Herrmann, G., “Wave Propagation in a Sandwich Ring”, Journal of the Acoustical Society of America, 43, (1968), pp. 998-1004.

Karasudhi, P., Keer, L.M., and Lee, S.L., “Vibratory Motion of a Body on an Elastic Half Space”, Journal of Applied Mechanics, 35, (1968), pp. 697-705.

Parmelee, R.A., Perelman, D.S., Lee, S.L., and Keer, L.M., “Seismic Response of Structure-Foundation Systems”, Journal of the Engineering Mechanics Division, ASCE, (1968), pp. 1295-1315.

1969

Keer, L.M. and Freeman, N.J., “Torsion of a Finite Elastic Cylindrical Rod Partially Bonded to an Elastic Half Space”, Quarterly Applied Mathematics, 26, (1969), pp. 567-573.

Fu, W.S. and Keer, L.M., “Coplanar Circular Cracks under Shear Loading”, International Journal of Engineering Sciences, 7, (1969), pp. 361-372.

Sve, C. and Keer, L.M., “Indentations of an Elastic Layer by Moving Punches”, International Journal of Solids and Structures, 5, (1969), pp. 795-816.

14

1970

Keer, L.M., “Moving and Simultaneously Fluctuating Loads on an Elastic Half-Plane”, Journal of the Acoustical Society of America, 47, (1970), pp. 1359-1365.

Sagartz, M.J., Keer, L.M., and Herrmann, G., “In-Plane Transient Response of a Sandwich Ring to Radial Impact”, Journal of the Acoustical Society of America, 47, (1970), pp. 1381-1389.

Keer, L.M. and Freeman, N.J., “Load Transfer Problem for an Embedded Shaft in Torsion”, Journal of Applied Mechanics, 37, (1970), pp. 959-964.

Keer, L.M. and Silva, M.A.G., “Bending of a Cantilever Brought Gradually into Contact with a Cylindrical Supporting Surface”, International Journal of Mechanical Science, 12, (1970), pp. 751-760.

Keer, L.M. and Sve, C., “On the Bending of Cracked Plates”, International Journal of Solids and Structures, 6, (1970), pp. 1545-1559.

1971

Keer, L.M. and Sve, C., “Indentation of an Elastic Layer by an Array of Punches Moving with Steady Velocity”, Journal of Applied Mechanics, 38, (1971), pp. 92-98.

Silva, M.A.G. and Keer, L.M., “Deflection of a Circular Plate with Built-in Edges”, Journal of Structural Division, ASCE, 97, No. ST8, (1971), pp. 2073-2084.

Silva, M.A.G. and Keer, L.M., “Vibration of Structures Having Changing Boundaries”, Journal of the Engineering Mechanics Division, ASCE, 97, No. EM3, (1971), pp. 1007-1011.

Freeman, N.J. and Keer, L.M., “On the Breaking of an Embedded Fiber in Torsion”, InternationalJournal of Engineering Science, 9, (1971), pp. 1007-1017.

1972

Stahl, B. and Keer, L.M., “Vibration and Stability of Cracked Rectangular Plates”, International Journal of Solids and Structures, 8, (1972), pp. 69-91.

Keer, L.M. and Stahl, B., “Eigenvalue Problems of Rectangular Plates with Mixed Edge Conditions”, Journal of Applied Mechanics, June (1972), pp. 513-520.

Stahl, B. and Keer, L.M., “Bending of a Uniformly Loaded Circular Plate with Mixed Boundary Conditions”, American Institute of Aeronautics and Astronautics Journal, 10, (1972), pp. 739-743.

15

Hayes, W.C., Keer, L.M., Herrmann, G., and Mockros, L.F., “A Mathematical Analysis for Indentation Tests of Articular Cartilage”, Journal of Biomechanics, 5, (1972), pp. 541-551.

Tsai, K.C., Dundurs, J. and Keer, L.M., “Contact Between an Elastic Layer with a Slightly Curved Bottom and a Substrate”, Journal of Applied Mechanics, 39, (1972), pp. 821-824.

Keer, L.M. and Chantaramungkorn, K., “Loss of Contact Between an Elastic Layer and Half-Space”, Journal of Elasticity, 2, (1972), pp. 191-197.

Stahl, B. and Keer, L.M., “Vibration and Buckling of a Rectangular Plate with an Internal Support”, Quarterly Journal of Mechanics and Applied Mathematics, 25, Pt. 4, (1972), pp. 467-478.

Freedman, J.M. and Keer, L.M., “Vibratory Motion of a Body on an Orthotropic Half-Plane”, Journal of Applied Mechanics, 39, (1972), pp. 1033-1040.

Keer, L.M., Dundurs, J. and Tsai, K.C., “Problems Involving a Receding Contact Between a Layer and a Half-Space”, Journal of Applied Mechanics, 39, (1972), pp. 1115-1120.

Keer, L.M. and Silva, M.A.G., “Two Mixed Problems for a Semi-Infinite Layer”, Journal of Applied Mechanics, 39, (1972), pp. 1121-1124.

1973

Keer, L.M., “The Response of an Elastic Half-Plane to a Moving and Simultaneously Fluctuating Indenter”, Journal of the Acoustical Society of America, 53, (1973), pp. 128-136.

Keer, L.M. and Freedman, J.M., “Static Response of a Rigid Strip Bonded to an Elastic Layer”, Acta Mechanica, 17, (1973), pp. 1-15.

Keer, L.M., Dundurs, J., and Kiattikomol, K., “Separation of a Smooth Circular Inclusion from a Matrix”, International Journal of Engineering Science, 11, (1973), pp. 1221-1233.

Keer, L.M. and Freedman, J.M., “Tensile Strip with Edge Cracks”, International Journal of Engineering Science, 11, (1973), pp. 1265-1275.

Dundurs, J., Tsai, K.C. and Keer, L.M., “Contact Between Elastic Bodies with Wavy Surfaces”, Journal of Elasticity, 3, (1973), pp. 109-115.

1974

Khadem, R. and Keer, L.M., “Coupled Pairs of Dual Integral Equations with Trigonometric Kernels”, Quarterly Journal of Applied Mathematics, 31, (1974), pp. 467-480.

16

Keer, L.M. and Chantaramungkorn, K., “Some Comments on an Approximation by Awojobi”, International Journal of Solids and Structures, 10, (1974), pp. 15-19.

Keer, L.M., Jabali, H.H. and Chantaramungkorn, K. “Torsional Oscillations of a Layer Bonded to an Elastic Half Space”, International Journal of Solids and Structures, 10, (1974), pp. 1-13.

Keer, L.M., “Potential Theory Problem for Two Strips in Contact”, Journal of Mathematics, 8, (1974), pp. 99-105.

Kiattikomol, K., Keer, L.M. and Dundurs, J., “Application of Dual Series to Rectangular Plates”, Journal EMD, ASCE 100, (1974), pp. 433-444.

Tsai, K.C., Dundurs, J. and Keer, L.M., “Elastic Layer Pressed Against a Half-Space”, Journal of Applied Mechanics, 41, (1974), pp. 703-707.

Dundurs, J., Kiattikomol, K. and Keer, L.M., “Contact Between Plates with Sagged Supports”, Journal EMD, ASCE 100, (1974), pp. 445-456.

Bazant, Z.P. and Keer, L.M., “Singularities of Elastic Stresses and of Harmonic Functions at Conical Notches or Inclusions”, International Journal of Solids and Structures, 10, (1974), pp. 957-964.

Keer, L.M., “Stress Analysis for Bonded Layers”, Journal of Applied Mechanics, 41, (1974), pp. 679-683.

Keer, L.M. and Luong, W.C., “Diffraction of Waves and Stress Intensity Factors in a Cracked Layered Composite”, Journal of the Acoustical Society of America, 56, (1974), pp. 1681-1686.

1975

Dundurs, J., Tsai, K.C. and Keer, L.M., “Some Observations on the Smooth Contact Between a Layer and a Half Space”, Journal of Applied Mechanics, 42, (1975), pp. 221-222.

Luong, W.C., Keer, L.M. and Achenbach, J.D., “Elastodynamic Stress Intensity Factors of a Crack Near an Interface”, International Journal of Solids and Structures, 11, (1975), pp. 919-925.

Chantaramungkorn, K. and Keer, L.M., “Stress Analysis for a Layer of Finite Length Bonded to a Half-Space of Identical Material”, International Journal of Solids and Structures, 11, (1975), pp. 1079-1096.

Keer, L.M. and Chantaramungkorn, K., “Stress Analysis for a Double Lap Joint”, Journal of Applied Mechanics, 42, (1975), pp. 353-357.

17

Keer, L.M., Luong, W.C. and Achenbach, J.D., “Elastodynamic Stress Intensity Factors for a Crack in a Layered Composite”, Journal of the Acoustical Society of America, 58, (1975), pp. 1204-1210.

Keer, L.M., “Mixed Boundary Value Problems for a Penny-Shaped Cut”, Journal of Elasticity, 5, (1975), pp. 89-98.

Keer, L.M. and Chantaramungkorn, K., “An Elastic Half Plane Weakened by a Rectangular Trench”, Journal of Applied Mechanics, 42, (1975), pp. 683-687.

Goodman, L.E. and Keer, L.M., “Influence of an Elastic Layer on the Tangential Compliance of Bodies in Contact”, IUTAM Symposium on The Mechanics of the Contact of Deformable Bodies, Delft University Press, (1975), pp. 122-151.

1976

Keer, L.M., “Two Potential Theory Problems for a Semi-Infinite Cylinder”, International Journal of Engineering Science, 14, (1976), pp. 1-6.

Keer, L.M. and Luk, V.K., “Stress Analysis of an Elastic Layer Attached to an Elastic Half Space of the Same Material”, International Journal of Engineering Science, 14, (1976), pp. 735-747.

Keer, L.M. and Watts, H.A., “Mixed Boundary Value Problems for a Cylindrical Shell”, International Journal of Solids and Structures, 12, Pergamon Press, (1976), pp. 723-729.

Abe, H., Mura, T. and Keer, L.M., “Growth Rate of a Penny-Shaped Crack in Hydraulic Fracturing of Rocks”, Journal of Geophysical Research, 81, (1976), pp. 5335-5340.

Keer, L.M. and Goodman, L.E., “Tangential Loading of Two Bodies in Contact”, Journal of Applied Mechanics, 43, (1976), pp. 513-514.

Keer, L.M., Lin, C.T., and Mura, T., “Fracture Analysis of Adhesively Bonded Sheets”, Journal of Applied Mechanics, 43, (1976), pp. 652-656.

Abe, H., Keer, L.M. and Mura, T., “Growth Rate of a Penny-Shaped Crack in Hydraulic Fracturing of Rocks, 2”, Journal of Geophysical Research, 81, (1976), pp. 6292-6297

1977

Goodman, L.E. and Keer, L.M., “Near Field Stress Analysis of a Spot Weld Between Elastic Plates”, International Journal of Solids and Structures, 13, (1977), pp. 151-158.

Keer, L.M., Freedman, J.M., and Watts, H.A., “Infinite Tensile Cylinder with Circumferential Edge Crack”, Letters in Applied and Engineering Sciences, 5, (1977), pp. 129-139.

18

Mastrojannis, E.N., Mura, T. and Keer, L.M., “Stress Field of a Planar Elliptical Dislocation Loop”, Philosophical Magazine, 35, (1977), pp. 1137-1139.

Keer, L.M., Luk, V.K. and Freedman, J.M., “Circumferential Edge Crack in a Cylindrical Cavity”, Journal of Applied Mechanics, 44, (1977), pp. 250-254.

Keer, L.M., Mendelsohn, D.A. and Achenbach, J.D., “Crack at the Apex of a Loaded Notch”, International Journal of Solids and Structures, 13, (1977), pp. 615-623.

Keer, L.M. and Parihar, K.S., “Singularity at the Apex of Pyramidal Notches with Three Equal Angles”, Quarterly Journal of Applied Mathematics, 30, (1977), pp. 401-405.

1978

Keer, L.M. and Parihar, K.S., “A Note on the Singularity at the Corner of a Wedge-Shaped Punch or Crack”, SIAM Journal of Applied Mathematics, 34, (1978), pp. 297-302.

Keer, L.M. and Parihar, K.S., “Elastic Stress Singularity at Conical Inclusions”, International Journal of Solids and Structures, 14, (1978), pp.261-263.

Nemat-Nasser, S., Keer, L.M. and Parihar, K.S., “Unstable Growth of Thermally Induced Interacting Cracks in Brittle Solids”, International Journal of Solids and Structures, 14, (1978), pp. 409-430.

Funabashi, N., Mura, T. and Keer, L.M., “Fatigue Crack Initiation and Propagation in Bonded Sheets”, Journal of Adhesion, 9, (1978), pp. 229-235.

Keer, L.M., Chen, S.H. and Comninou, Maria, “The Interface Penny-Shaped Crack Reconsidered”, International Journal of Engineering Science, 16, (1978), pp.765-772.

Parihar, K.S. and Keer, L.M., “Stress Singularity at the Corner of a Wedge-Shaped Crack or Inclusion”, Journal of Applied Mechanics, 45, (1978), pp. 791-796.

1979

Keer, L.M. and Mowry, D.B., “The Stress Field Created by a Circular Sliding Contact on Transversely Isotropic Spheres”, International Journal of Solids and Structures, 15, (1979), pp. 33-39.

Keer, L.M., Nemat-Nasser, S. and Oranratnachai, A., “Unstable Growth of Thermally Induced Interacting Cracks in Brittle Solids: Further Results”, International Journal of Solids and Structures, 15, (1979), pp. 111-126.

19

Abe, H., Keer, L.M. and Mura, T., “Theoretical Study of Hydraulically Fractured Penny-Shaped Cracks in Hot Dry Rocks”, International Journal of Numerical and Analytical Methods in Geomechanics, 3, (1979), pp. 79-96.

Mastrojannis, E.N., Keer, L.M. and Mura, T., “Stress Intensity Factor for a Plane Crack under Normal Pressure”, International Journal of Fracture, 15, (1979), pp. 247-258.

Luk, V.K. and Keer, L.M., “Stress Analysis for an Elastic Half Space Containing an Axially-Loaded Rigid Cylindrical Rod”, International Journal of Solids and Structures, 15, (1979), pp. 805-827.

Parihar, K.S. and Keer, L.M., “The Singularity at the Apex of a Bonded Wedge-Shaped Stamp”, Journal of Applied Mechanics, 46, (1979), pp. 577-580.

Achenbach, J.D., Keer, L.M., Khetan, R.P. and Chen, S.H., “Loss of Adhesion at the Tip of an Interface Crack”, Journal of Elasticity, 9, (1979), pp. 397-424.

Nemat-Nasser, S., Oranratnachai, A. and Keer, L. M., "Spacing of Water-Free Crevasses," Journal of Geophysical Research, 84, (1979), pp. 4611-4620.

1980

Sumi, Y., Nemat-Nasser, S. and Keer, L.M., “A New Combined Analytical and Finite-Element Solution Method for Stability Analysis of the Growth of Interacting Tension Cracks in Brittle Solids”, International Journal of Engineering Science, 18, (1980), pp. 211-224.

Chen, S.H., Keer, L.M. and Achenbach, J.D., “Steady Motion of a Crack Parallel to a Bond-Plane”, International Journal of Engineering Science, 18, (1980), pp. 225-238.

Goodman, L.E. and Keer, L.M., “Yield of Circular Weld Joining Elastic Plates”, Journal of the Engineering Mechanics Division, ASCE, 106, (1980), pp. 135-146.

Mastrojannis, E.N., Keer, L.M. and Mura, T., “Growth of Planar Cracks Induced by Hydraulic Fracturing”, International Journal for Numerical Methods in Engineering, 15, (1980), pp. 41-54.

Keer, L.M., Nemat-Nasser, S. and Oranratnachai, A., “Spontaneous Growth of Interacting Cracks in a Cruciform Pattern”, Engineering Fracture Mechanics, 13, (1980), pp. 15-29.

Haritos, G.K. and Keer, L.M., “Stress Analysis for an Elastic Half Space Containing an Embedded Rigid Block”, International Journal of Solids and Structures, 16, (1980), pp. 19-40.

Mak, A.F., Keer, L.M., Chen, S.H. and Lewis, J.L., “A No-Slip Interface Crack”, Journal of Applied Mechanics, 47, (1980), pp. 347-350.

20

Luk, V.K. and Keer, L.M., “Stress Analysis of a Deep Rigid Axially-Loaded Cylindrical Anchor in an Elastic Medium”, International Journal for Numerical and Analytical Methods in Geomechanics, 4, (1980), pp. 215-232.

Achenbach, J.D., Keer, L.M. and Mendelsohn, D.A., “Elastodynamic Analysis of an Edge Crack”, Journal of Applied Mechanics, 47, (1980), pp. 551-556.

Nemat-Nasser, S., Sumi, Y. and Keer, L.M., “Unstable Growth of Tension Cracks in Brittle Solids: Stable and Unstable Bifurcations, Snap-through, and Imperfection Sensitivity”, International Journal of Solids and Structures, 16, (1980), pp. 1017-1035.

Mendelsohn, D.A., Achenbach, J.D. and Keer, L.M., “Scattering of Elastic Waves by a Surface-Breaking Crack”, Wave Motion, 2, (1980), pp. 277-292.

Karihaloo, B.L., Keer, L.M. and Nemat-Nasser, S., “Crack Kinking Under Non-symmetric Loading”, Engineering Fracture Mechanics, 13, (1980), pp. 879-888.

Mak, A.F. and Keer, L.M., “A No-Slip Edge Crack on a Bimaterial Interface”, Journal of Applied Mechanics, 47, (1980), pp. 816-820.

1981

Keer, L.M. and Chen, S.H., “The Intersection of a Pressurized Crack with a Joint”, Journal of Geophysical Research, 86, (1981), pp. 1032-1038.

Sumi, Y., Keer, L.M. and Nemat-Nasser, S., “Thermally Induced Radial Cracking in Fuel Element Pellets”, Journal of Nuclear Materials, 96, (1981), pp. 147-159.

Chen, S.H., Keer, L.M. and Achenbach, J.D., “Steady Motion of a Crack Parallel to a Bond Plane -- Further Results”, International Journal of Engineering Science, 19, (1981), pp. 805-809.

Karihaloo, B.L., Keer, L.M., Nemat-Nasser, S. and Oranratnachai, A., ”Approximate Description of Crack Kinking and Curving”, Journal of Applied Mechanics, 48, (1981), pp. 515-519.

Keer, L.M. and Mak, A.F., “Loss of Contact in the Vicinity of a Right-Angle Corner for a Simply Supported, Laterally Loaded Plate”, Journal of Applied Mechanics, 48, (1981), pp. 597-600.

Keer, L.M., Nemat-Nasser, S., Adeli, H.and Hejazi, M.S., “Dynamic Response of Foundations with Arbitrary Geometries”, Journal of Engineering Mechanics Division, ASCE, 48, (1981), pp. 953-967.

1982

21

Keer, L.M. and Meade, K.P., “Dynamic Response of an Embedded Rectangular Foundation to Antiplane Shear Waves”, International Journal of Solids and Structures, 18, (1982), pp. 249-261.

Bryant, M.D. and Keer, L.M., “Rough Contact Between Elastically and Geometrically Identical Curved Bodies”, Journal of Applied Mechanics, 49, (1982), pp. 345-352.

Keer, L.M., Bryant, M.D. and Haritos, G.K., “Subsurface and Surface Cracking Due to Hertzian Contact”, Journal of Lubrication Technology, 109, (1982), pp. 347-351.

Mak, A.F. and Keer, L.M., “A No-Slip Interface Crack in a Shear Field”, International Journal of Solids and Structures, 18, (1982), pp. 729-736.

Keer, L.M. and Meade, K.P., “A Note on No-Slip Interface Crack”, Journal of Applied Mechanics, 49, (1982), pp. 454-455.

Keer, L.M., Nemat-Nasser, S. and Oranratnachai, A., “Surface Instability and Splitting in Compressed Brittle Elastic Solids Containing Crack Arrays”, Journal of Applied Mechanics, 49, (1982), pp. 761-767.

Miller, G.R. and Keer, L.M., “Approximate Analytical Model of Anchor Pull-Out Test”, Journal of Applied Mechanics, 49, (1982), pp. 768-772.

1983

Sumi, Y., Nemat-Nasser, S.and Keer, L.M., “On Crack Branching and Curving in a Finite Body”, International Journal of Fracture, 21, (1983), pp. 67-79.

Keer, L.M., Lee, J.C. and Mura, T., “Stress Distributions for a Quarter Plane Containing an Arbitrarily Oriented Crack”, Journal of Applied Mechanics, 50, (1983), pp. 43-49.

Ahmadi, N., Keer, L.M. and Mura, T., “Non-Hertzian Contact Stress Analysis for an Elastic Half Space--Normal and Sliding Contact”, International Journal of Solids and Structures, 19, (1983), pp. 357-373.

Keer, L.M. and Bryant, M.D., “A Pitting Model for Rolling Contact Fatigue”, Journal of Lubrication Technology, Trans. ASME, 105, (1983), pp. 198-205.

Keer, L.M., Lee, J.C. and Mura, T., “Hetenyi's Elastic Quarter Space Problem Revisited”, International Journal of Solids and Structures, 19, (1983), pp. 497-508.

Keer, L.M. and Miller, G.R., “Contact Between an Elastically Supported Circular Plate and a Rigid Indenter”, International Journal of Engineering Science, 21, (1983), pp. 681-690.

Keer, L.M. and Miller, G.R., “Smooth Indentation of Finite Layer”, Journal of Engineering Mechanics, ASCE, 109, (1983), pp. 706-717.

22

Keer, L.M. and Ballarini, R., “Smooth Contact Between a Rigid Indenter and an Initially Stressed Orthotropic Beam”, AIAA Journal, 21, (1983), pp. 1035-1042.

Miller, G.R. and Keer, L.M., “Interaction Between a Rigid Indenter and a Near-Surface Void or Inclusion”, Journal of Applied Mechanics, 50, (1983), pp. 615-620.

Mastrojannis, E.N., Keer, L.M. and Mura, T., “Numerical Solution of a Three-Part Mixed Boundary Value Problem of Linear Elastostatics”, Computer Methods in Applied Mechanics and Engineering, 39, (1983), pp. 93-101.

Fabrikant, V.I. and Keer, L.M., “The Interaction Between a System of Circular Punches on a Non–homogeneous Elastic Half Space”, International Journal of Mechanical Science, 25, (1983), pp. 513-518.

Achenbach, J.D., Lin, W. and Keer, L.M., “Surface Waves Due to Scattering by a Near-Surface Parallel Crack”, IEEE Transactions on Sonics and Ultrasonics, SU-30, (1983), pp. 270-276.

1984

Mastrojannis, E.N., Mura, T. and Keer, L.M., “An Axisymmetric Neumann Potential Problem for the Circular Annulus”, Computers and Structures, 18, (1984), pp. 365-368.

Keer, L.M., Lin, W. and Achenbach, J.D., “Resonance Effects for a Crack Near a Free Surface”, Journal of Applied Mechanics, 51, (1984), pp. 65-70.

Meade, K.P. and Keer, L.M., “On the Problem of a Pair of Point Forces Applied to the Faces of a Semi-Infinite Plane Crack”, Journal of Elasticity, 14, (1984), pp. 3-14.

Meade, K.P. and Keer, L.M., “Stress-Intensity Factors for a Semi-Infinite Plane Crack with a Wavy Front”, Journal of Elasticity, 14, (1984), pp. 79-92.

Lee, J.C. and Keer, L.M., “Propagation of a Crack Through an Interfacial Boundary”, Rock Mechanics in Productivity and Protection, Proceedings 25th Symposium on Rock Mechanics, Society of Mining Engineers, (1984), pp. 135-144.

Dempsey, J.P., Keer, L.M., Pate, N.B. and Glasser, M.L., “Contact Between Plates and Unilateral Supports”, Journal of Applied Mechanics, 51, (1984), pp. 324-328.

Keer, L.M., Lee, J.C. and Mura, T., “A Contact Problem for the Elastic Quarter Space”, International Journal of Solids and Structures, 20, (1984), pp. 513-524.

Clech, J.P., Keer, L.M. and Lewis, J.L., “A Crack Model of a Bone Cement Interface”, Journal of Biomechanical Engineering, 106, (1984), pp. 235-243.

23

Hasebe, N., Keer, L.M. and Nemat-Nasser, S., “Stress Analysis of a Kinked Crack Initiating From a Rigid Line Inclusion. Part I: Formulation”, Mechanics of Materials, 3, (1984), pp. 131-145.

Hasebe, N., Nemat-Nasser, S. and Keer, L.M., “Stress Analysis of a Kinked Crack Initiating From a Rigid Line Inclusion, Part II: Direction of Propagation”, Mechanics of Materials, 3, (1984), pp. 147-156.

Bryant, M.D., Miller, G.R. and Keer, L.M., “Line Contact Between a Rigid Indenter and a Damaged Elastic Body”, Quarterly Journal of Mechanical and Applied Mathematics, 37, (1984), pp. 467-478.

Lin, W., Keer, L.M. and Achenbach, J.D., “Dynamic Stress Intensity Factors for an Inclined Subsurface Crack”, Journal of Applied Mechanics, 51, (1984), pp. 773-779.

Keer, L.M., Ahmadi, N. and Mura, T., “Tangential Loading of Elastic Bodies in Contact”, Computers and Structures, 19, (1984), pp. 93-101.

Ballarini, R., Shah, S.P. and Keer, L.M., “Crack Growth in Cement-Based Composites”, Engineering Fracture Mechanics, 20, (1984), pp. 433-445.

1985

Miller, G.R. and Keer, L.M., “A Numerical Technique for the Solution of Singular Integral Equations of the Second Kind”, Quarterly of Applied Mathematics, (1985), pp. 455-465.

Clarke, T.M., Miller, G.R., Keer, L.M. and Cheng, H.S., “The Role of Near-Surface Inclusions in the Pitting of Gears”, ASLE Transactions, 28, (1985), pp. 111-116.

Miller, G.R., Keer, L.M. and Cheng, H.S., “On the Mechanics of Fatigue Crack Growth Due to Contact Loading”, Proceedings of the Royal Society London, A397, (1985), pp. 197-209.

Farris, T.N. and Keer, L.M., “Williams' Blister Test Analyzed as an Interface Crack Problem”, International Journal of Fracture, 27, (1985), pp. 91-103.

Clech, J.P., Keer, L.M. and Lewis, J.L., “A Model of Tension and Compression Cracks with Cohesive Zone at a Bone-Cement Interface”, Journal of Biomechanical Engineering, 107, (1985), pp. 175-182.

Haritos, G.K. and Keer, L.M., “Pullout of a Rigid Insert Adhesively Bonded to an Elastic Half Plane”, Journal of Adhesion, 22, (1985), pp. 131-150.

24

Keer, L.M. and Lee, J.C., “Dynamic Impact of an Elastically Supported Beam - Large Area Contact”, International Journal of Engineering Science, 23, (1985), pp. 987-997.

Sumi, Y., Nemat-Nasser, S. and Keer, L.M., “On Crack Path Stability in a Finite Body”, Engineering Fracture Mechanics, 22, (1985), pp. 759-771.

1986

Keer, L.M. and Schonberg, W.P., “Smooth Indentation of an Isotropic Cantilever Beam”, International Journal of Solids Structures, 22, (1986), pp. 87-106.

Clech, J.P., Keer, L.M. and Lewis, J.L., “An Array of No-Slip Tensile Cracks at a Bimaterial Interface”, Engineering Fracture Mechanics, 23, (1986), pp. 899-911.

Ballarini, R., Shah, S.P. and Keer, L.M., “Failure Characteristics of Short Anchor Bolts Embedded in a Brittle Material”, Proceedings Royal Society London, A404, (1986), pp. 35-54.

Keer, L.M., Farris, T.N. and Lee, J.C., “Knoop and Vickers Indentation in Ceramics Analyzed as a Three-Dimensional Fracture”, Journal of American Ceramics Society, 69, (1986), pp. 392-396.

Wijeyewickrema, A.C. and Keer, L.M., “Antiplane Transient Response of Embedded Cylinder”, Journal of Engineering Mechanics, ASCE, 112, (1986), pp. 536-549.

Santare, M.H. and Keer, L.M., “Interaction Between an Edge Dislocation and a Rigid Elliptical Inclusion”, Journal of Applied Mechanics, 53, (1986), pp. 382-385.

Lee, J.C. and Keer, L.M., “Study of a Three-Dimensional Crack Terminating at an Interface”, Journal of Applied Mechanics, 53, (1986), pp. 311-316.

Achenbach, J.D., Lin, W. and Keer, L.M., “Mathematical Modelling of Ultrasonic Wave Scattering by Sub-Surface Cracks”, Ultrasonics, 24, (1986), pp. 207-215.

Clech, J.P., Lewis, J.L. and Keer, L.M., “A Finite Element Technique for Determining Mode I Stress Intensity Factors: Application to No-Slip Bimaterial Crack Problems”, Computers and Structures, 23, (1986), pp. 715-724.

Keer, L.M., and Schonberg, W.P., “Smooth Indentation of a Transversely Isotropic Cantilever Beam”, International Journal Solids Structures, 22, (1986), pp. 1033-1053.

Lin, W. and Keer, L.M., “Scattering by a Horizontal Subsurface Penny-Shaped Crack”, Proceedings Royal Society London, A408, (1986), pp. 277-294.

1987

25

Santare, M.H., Keer, L.M., and Lewis, J.L., “Cracks Emanating From a Fluid Filled Void Loaded in Compression: Application to the Bone-Implant Interface”, Journal of Biomechanical Engineering, 109, (1987), pp. 55-59.

Mastrojannis, E.N., Keer, L.M., and Mura, T., “Thin Circular Plate Under Temperature Loading in Adhesive Contact with an Elastic Half-Space”, Journal of Thermal Stresses, 10, (1987), pp. 71-81.

Keer, L.M. and Farris, T.N., “Effects of Finite Thickness and Tangential Loading on Development of Zones of Microslip in Fretting”, ASLE Transactions, 30, (1987), pp. 203-210.

Lee, J.C., Farris, T.N., and Keer, L.M., “Stress Intensity Factors for Cracks of Arbitrary Shape Near an Interfacial Boundary”, Engineering Fracture Mechanics, 27, (1987), pp. 27-41.

Ballarini, R., Keer, L.M., and Shah, S.P., “An Analytical Model for the Pull-out of Rigid Anchors”, International Journal of Fracture, 33, (1987), pp. 75-94.

Robert, M. and Keer, L.M., “An Elastic Circular Cylinder With Displacement Prescribed at the Ends--Axially Symmetric Case”, Quarterly Journal Mechanics and Applied Mathematics, 40, (1987), pp. 339-363.

Robert, M. and Keer, L.M., “An Elastic Circular Cylinder With Prescribed Displacements at the Ends--Asymmetric Case”, Quarterly Journal Mechanics and Applied Mathematics, 40, (1987), pp. 365-381.

Wijeyewickrema, A.C., and Keer, L.M., “Nonlinear Antiplane Response of Rigid Inclusion to Incident Stress Wave”, Journal of Engineering Mechanics, ASCE, 113, (1987), pp. 1565-1583.

Keer, L.M. and Lin, W., “A Penny-Shaped Crack in a Layer Whose Upper and Lower Surfaces are Fixed”, International Journal of Fracture, 34, (1987), pp. 229-236.

Lin, W. and Keer, L.M., “Scattering By a Planar Three-Dimensional Crack”, Journal of the Acoustical Society of America, 82, (1987), pp. 1442-1448.

Schonberg, W.P., Keer, L.M. and Woo, T.K., “Low Velocity Impact of Transversely Isotropic Beams and Plates”, International Journal Solids Structure, 23, (1987), pp. 871-896.

Ahmadi, N., Keer, L.M., Mura, T. and Vithoontien, V., “The Interior Stress Field Caused by Tangential Loading of a Rectangular Patch on an Elastic Half Space”, Journal of Tribology, 109, (1987), pp. 627-629.

Farris, T.N., Keer, L.M. and Steele, R.K., “The Effect of Service Loading on Shell Growth in Rails”, Journal of the Mechanics and Physics of Solids, 35, (1987), pp. 677-700.

26

1988

Lin, W. and Keer, L. M., “Growth of a Hydraulically Pressurized Fracture”, Engineering Fracture Mechanics, 29, (1988), pp. 473-481

Mastrojannis, E. N., Keer, L. M. and Mura, T., “Axisymmetrically Loaded Thin Circular Plate in Adhesive Contact with an Elastic Half-Space”, Computational Mechanics, 3, (1988), pp. 283-298

Robert, M. and Keer, L. M., “Stiffness of an Elastic Circular Cylinder of Finite Length”, Journal of Applied Mechanics, 55, (1988), pp. 560-565.

1989

Keer, L. M. and Guo, Q., “Stress Analysis for Thin Bonded Layers”, Proceedings of the 7th International Conference on Fracture, Houston, Texas, 20-24 March 1989, Pergamon Press, pp. 3073-3080

Lin, W. and Keer, K.M., “Analysis of a Vertical Crack in a Multilayered Medium”, Journal of Applied Mechanics, 56, (1989), pp. 63–69.

Guo, Q., Li, K.R. and Keer, L.M., “The Plastic Stress Ahead of a Mixed Mode I and II Plane Stress Crack”, Engineering Fracture Mechanics, 32, (1989), pp. 947–951

Hanson, M.T., Keer, L.M. and Farris, T.N., “Energy Dissipation in Non–Hertzian Fretting Contact”,STLE Tribology Transactions, 32, (1989), pp. 147–154.

Braza, J.F., Cheng, H.S., Fine, M.E., Gangopadhyay, Keer, L.M. and Worden, R.E., “Mechanical Failure Mechanisms in Ceramic Sliding and Rolling Contacts”, STLE Tribology Transactions, 32, (1989), pp. 1–8.

Hanson, M. T. and L. M. Keer, "Cyclic Tangential Loading of Dissimilar Elastic Bodies,"International Journal of Mechanical Science, 31, (1989), pp. 107-109.

Hanson, M. T., Lin, W. and Keer, L. M., "Three-Dimensional Analysis of Cracking through the Boundary of a Two-Phase Material," Journal of Applied Mechanics, 56, (1989), pp. 850-857.

Zubelewicz, A. and Keer, L.M.,“Micromechanicallly Based Constitutive Modeling of Crystalline Materials”, International Journal of Solids Structures, 25, (1989), pp. 797–801.

Wijeyewickrema, A.C. and Keer, L.M., “Transient Elastic Wave Scattering by a Rigid Spherical Inclusion”, Journal of Acoustical Society of America, 86, (1989), pp. 802–809.

Lin, W. and Keer, L.M., “Three–Dimensional Analysis of Cracks in Layered Transversely Isotropic Media”, Proceedings of the Royal Society of London, 424, (1989), pp. 307–322.

27

Zubelewicz, A., Berriche, R., Keer, L.M., and Fine, M.E., “Lifetime Prediction of Solder Materials”, Journal of Electronic Packaging, 111, (1989), pp. 179–182.

Hanson, M.T. and Keer, L.M. “Stress Analysis and Contact Problems for an Elastic Quarter-Plane”, Quarterly Journal of Mechanics and Applied Mathematics, 42, (1989), pp. 363–383.

Yu, M.M.-H. and Keer, L.M., “Growth of the Shell/Transverse Defect in Rails”, Journal of Tribology, 111, (1989) pp. 648–654.

Chen, H.–L.,Keer, L.M. and Shah, S.P., “Impact of a Circular Plate Resting on Sand and Dynamic Response of an Underground Structure”, in Computational Techniques for Contact, Impact, Penetration and Perforation of Solids, AMD–Vol. 103, ASME, (1989) pp. 55–66.

1990

Keer, L.M. and Lin,W., “Analysis of Cracks in Transversely Isotropic Media”, Micromechanics and Inhomogeneity – The Toshio Mura Anniversary Volume, edited by G.J. Weng, M. Taya, and H. Abé, Springer–Verlag, (1990), pp.187–196.

Chen, H.L., Shah, S.P. and Keer, L.M., “Dynamic Response of Shallow–Buried cylindrical Structures”, Journal of Engineering Mechanics, ASCE, 116, (1990) pp. 152–171.

Hanson, M.T. and Keer, L.M., “Some Aspects of the Quarter–plane and Quarter–space Problems”, in Elasticity Mathematical Methods and Applications, by G. Eason and R.W. Ogden, Ellis Horwood Publishers, Chichester, England, (1990) pp.181–198.

Gharpuray, V.M. Keer, L.M. and Lewis, J.L., “Cracks Emanating from Circular Voids or Elastic Inclusions in PMMA Near a Bone-Implant Interface”, Journal of Biomechanical Engineering, ASME, 112, (1990), pp. 22-28.

Kim, S.H., Keer, L.M. and Cheng, H.S., “Loss of Adhesion of a Layer Bonded to an Elastic Half Space caused by a Concentrated Contact”, STLE Tribology Transactions, 33, (1990), pp. 53-59.

Keer, L.M. and Worden, R.E., "A Qualitative Model to Describe the Microchipping Wear Mode in Ceramic Rollers," STLE Tribology Transactions, 33, (1990), pp. 411-417.

Guo, Q. and Keer, L.M., “A Crack at the Interface of Two Power-Law Hardening Materials - Antiplane Case”, Journal of Mechanics of Physics and Solids, 38, (1990), pp. 183-194.

Keer, L.M. and Guo, Q., “Stress Analysis for Symmetrically Loaded Bonded Layers”, International Journal of Fracture, 43, (1990), pp. 69-81.

28

Goshima, T. and Keer, L.M., “Thermoelastic Contact between a Rolling Rigid Indenter and a Damaged Elastic Body”, Journal of Tribology, ASME, 112, (1990), pp. 382-391.

Farris, T.N., Keer, L.M. and Steele, R.K., “Life Prediction for Unstable Shell Growth in Rails”, Journal of Engineering for Industry, ASME, 112, (1990), pp.175-180.

Goshima, T., Hanson, M.T., and Keer, L.M., “Three-Dimensional Analysis of Thermal Effects on Surface Crack Propagation in Rolling Contact”, Journal of Thermal Stresses, 13, (1990), pp. 237-261

Guo, Q., Osaki, H., Keer, L.M., and Wheeler, D.R., “Measurement of the Intrinsic Bond Strength of Brittle Thin Films on Flexible Substrates”, Journal of Applied Physics, 68, (1990), pp. 1649-1654.

Zubelewicz, A., Guo, Q., Cutiongco, E.C., Fine, M.E., and Keer, L.M., “Micromechanical Mehtod to Predict Fatigue Life of Solder”, Journal of Electronic Packaging, 112, (1990), pp. 179-182.

Wijeyewickrema, A.C., Keer, L.M., Hirashima, K., and Mura, T., “The Annular Crack Surrounding an Elastic Fiber in a Tension Field”, International Journal of Solids and Structures, 27, (1990), pp.315-327.

Guo, Q. and Keer, L.M., “A Crack at the Interface Between an Elastic-Perfectly Plastic Solid and a Rigid Substrate”, Journal of Mechanics of Physics and Solids, 38, (1990), pp. 843-857.

Hanson, M.T. and Keer, L.M., “A Simplified Analysis for an Elastic Quarter-Space”, Quarterly Journal of Mechanics and Applied Mathematics, 43, (1990), pp.561-587.

Eberhardt, A.W., Keer, L.M., Lewis, J.L. and Vithoontien, V., “An Analytical Model of Joint Contact”, Journal of Biomechanical Engineering, ASME, 112, (1990), pp.407-413.

1991

Keer, L.M., Kim, S.H., Eberhardt, A.W. and Vithoontien, V., “Compliance of Coated Elastic Bodies in Contact”, International Journal of Solids and Structures, 27, (1991), pp.681-698.

Robert, P., Zubelewicz, A. and Keer, L.M., “Micromechanism Approach to Model Creep Fatigue Interaction in Lead-Tin Alloy”, Journal of Engineering Mechanics, ASCE, 117, (1991), pp.707-711.

Chen, W.-R. and Keer, L.M., “Fatigue Crack Growth in Mixed Mode Loading”, Journal of Engineering Materials and Technology, 113, (1991), pp.222-227.

Lin, W., Kuo, C.H., and Keer, L.M., “Analysis of a Transversely Isotropic Half Space under Normal and Tangential Loadings”, Journal of Tribology, 113, (1991), pp.335-338.

Wijeyewickrema, A.C. and Keer, L.M., “Matrix Fracture in Brittle Matrix Fiber-Reinforced Composites”, International Journal of Solids and Structures, 28, (1991), pp.43-65.

29

Hanson, M.T. and Keer, L.M., “Analysis of Edge Effects on Rail-wheel Contact”, Wear, 144, (1991), pp.39-55.

Guo, Q, Whitman, C.S., Keer, L.M., and Chung, Y-W., “A Stress-induced Diffusion Model for Failure of Interconnects in Microelectronic Devices”, Journal of Applied Physics, 69, (1991), pp.7572-7580.

Eberhardt, A.W. and Keer, L.M., “Normal and Tangential Contact of Thin Layered Spheres” in Advances in Engineering Tribology, Y-W. Chung and H.S. Cheng (Eds.), STLE SP-31, pp.110-121.

Wu, M., Rudnicki, J.W., Kuo, C.H. and Keer, L.M., “Surface Deformation and Energy Release Rates for Constant Stress Drop Slip Zones in an Elastic Half-Space”, Journal of Geophysical Research, 96, (1991), pp. 16, 509-16, 524.

Fan, H., Keer, L.M. and Mura, T., “The Effect of Plastic Deformation on Crack Initiation in Fatigue”, International Journal of Solids and Structures, 28, (1991), pp. 1095-1104.

Chen, W.R. and Keer, L.M., “An Application of Incremental Plasticity Theory to Fatigue Life Prediction of Steels", Journal of Engineering Materials and Technology, ASME, 113 (1991), pp. 404-410.

Eberhardt, A.W., Lewis, J.L. and Keer, L.M., “Normal Contact of Elastic Spheres with Two Elastic Layers as a Model of Joint Articulation", Journal of Biomedical Engineering, ASME, 113 (1991), pp. 410-417.

Worden, R.E. and Keer, L.M., “Green's Functions for a Point Load and Dislocation in an Annular Region", Journal of Applied Mechanics, ASME, Vol. 58, No. 4, (1991), pp. 954-959.

Gharpuray, V.M., Dundurs, J. and Keer, L.M., “A Crack Terminating at a Slipping Interface Between Two Materials", Journal of Applied Mechanics, ASME, Vol. 58, No. 4, (1991), pp. 960-963.

1992

Li, X. and Keer, L.M., “The Growth of Pressurized Planar Cracks Between Barriers", International Journal of Solids and Structures, Vol. 29, No. 1, (1992), pp. 27-39.

Wijeyewickrema, A.C. and Keer, L.M., “Matrix Crack Interaction in a Fiber-Reinforced Brittle Matrix Composite”, International Journal of Solids and Structures, Vol. 29, No. 5, (1992), pp. 559-570.

Fan, H., Keer, L.M. and Mura, T., “Near Surface Crack Initiation Under Contact Fatigue", Tribology Transactions, Vol. 35, No. 1, (1992), pp. 121-127.

Xu, Y. and Keer, L.M., “Non-Planar Deviation of an Initially Straight Moving Crack", Engineering Fracture Mechanics, Vol. 41, No. 4, (1992), pp. 577-586.

30

Kuo, C.H. and Keer, L.M., “Contact Stress Analysis of a Layered Transversely Isotropic Half-Space", Journal of Tribology, Vol. 114, No. 2, (1992), pp. 253-261.

Keer, L.M. and Kuo, C.H., “Cracking in a Loaded, Brittle Elastic Half-Space", International Journal of Solids and Structures, Vol. 29, No. 14/15, (1992), pp. 1819-1826.

Gharpuray, V.M., Keer, L.M.and Lewis, J.L., “Cracks Emanating from Slipping Inclusions Near a Bone-Implant Interface", Journal of Biomechanical Engineering, ASME, Vol. 114, No. 2, (1992), pp. 178-182.

Farris, T.N., Xu, Y., and Keer, L.M., "Some Factors Influencing the Transition from Shelling to Detail Fracture," Residual Stress in Rails: Effects on Rail Integrity and Railroad Economics, Volume II: Theoretical and Numerical Analyses, Edited by O. Orringer, J. Orkisz, and Z. Swiderski, Kluwer, Boston, (1992) pp 23-44.

Guo, Q., Cutiongco, E. C., Keer, L. M. and Fine, M. E., "Thermomechanical Fatigue Life Prediction of 63Sn/37Pb Solder," Journal of Electronic Packaging, ASME, Vol. 114 (1992), pp. 145-151.

Li, X. and Keer, L.M., “A Direct Method for Solving Crack Growth Problems - I.", International Journal of Solids and Structures, Vol. 29, No. 22, (1992), pp. 2749-2760.

Li, X. and Keer, L.M., “A Direct Method for Solving Crack Growth Problems - II. Shear Mode Problems", International Journal of Solids and Structures, Vol. 29, No. 22, (1992), pp. 2735-2747.

Fan, H., Keer, L.M., and Mura, T., “Inhomogeneity Problem Revisited via the Modulus Perturbation Approach", International Journal of Solids and Structures, Vol. 29, No. 20, (1992), pp. 2583-2594.

Fan, H. and Keer, L.M., “The Early Stage of Fatigue Crack Propagation", Engineering Fracture Mechanics, Vol. 42, No. 5, (1992), pp. 789-796.

Lin, W. and Keer, L.M., “A Study of Lamb Waves in Anisotropic Plates", Journal of the Acoustical Society of America, Vol. 92, No. 2, Pt. 1, August, (1992), pp. 888-894.

Hanson, M. T. and Keer, L. M., "An Analytical Life Prediction Model for the Crack Propagation Occurring in Contact Fatigue Failure," STLE Tribology Transactions, Vol. 35, No. 3 (1992) pp. 451-461.

Xu, Y. and Keer, L. M., "Higher Order Asymptotic Field at the Moving Crack Tip," International Journal of Fracture, Vol 58, (1992), pp. 325-343.

Jeykumaran, M., Rudnicki, J. W., and Keer, L. M., "Modeling Slip Zones with Triangular Dislocation Elements," Bulletin of the Seismological Society of America, Vol. 82, No. 5 (1992) pp. 2153-2169.

1993

31

Wijeyewickrema, A.C. and Keer, L.M., “Matrix Cracking in a Fiber-Reinforced Composite with Slip at the Fiber-Matrix Interface", International Journal of Solids and Structures, Vol. 30, No. 1, (1993), pp. 91-113.

Xu, Y. and Keer, L. M., "Crack Curving in Anisotropic Elastic Solids," Engineering Fracture Mechanics, Vol. 44, No. 1, (1993), pp. 63-73.

Fan, H., Keer, L. M., Cheng, W. and Cheng, H. S., "Competition between Fatigue Crack Propagation and Wear," Journal of Tribology, Vol. 115, No. 1, (1993), pp. 141-148.

Yu, M, Moran, B. and Keer, L. M., "A Direct Analysis of Two-Dimensional Elastic-Plastic Rolling Contact," Journal of Tribology, Vol. 115, No. 2, (1993) pp. 227-236.

Keer, L.M. and Polonsky, I., "The Displacement Field of a Triangular Phase Boundary Dislocation Loop," Philosophical Magazine, Vol. 67, No. 6, (1993), pp. 1423-1431.

Chen, W.R. and Keer, L.M., "Transverse Vibration of a Rotating Twisted Timoshenko Beam Under Axial Loading," Journal of Vibration and Acoustics, Vol. 115, No. 3, (1993), pp. 285-294.

Hanson, M. T. and Keer, L. M., "Analytical and Numerical Treatment of Flange Contact," in Rail Quality and Maintenance for Modern Railway Operation, Edited by Kalker, Cannon and Orringer, Kluwer, (1993), pp. 203-214.

Xu, Y. and Keer, L. M., "Non-Steady State Solution of a Moving Crack in an Anisotropic Solid," Journal of the Mechanics and Physics of Solids, Vol. 41, No. 9, (1993), pp. 1479-1498.

Fan, H. and Keer, L. M., "Two-dimensional Line Defects in Anisotropic Elastic Solids," International Journal of Fracture, Vol. 62, (1993), pp. 25-42.

Kuo, C.H., Keer, L.M. and Steele, R.K., “A Simulation of the Vertical Split Head Failure in Rails,” International Journal of Solids Structures, Vol. 30, (1993), pp. 2177-2198.

Keer, L. M., Y. Xu, Cheng, H. S. and Xuan, J. L., "Simulation of Wear Particle Creation in Asperity Contacts Using the Finite Element Method," Tribology Transactions, Vol. 36, (1993), pp. 613-620.

Chen, W. R. and Keer, L. M., "Mixed-Mode Fatigue Crack Propagation of Penny-Shaped Cracks," Journal of Engineering Materials and Technology, Vol. 115, (1993), pp. 365-372.

Guo, Q., Keer, L. M. and Chung, Y.-W., "Thermal Stress-Induced Open-Circuit Failure in Microelectronics Thin-Film Metallizations," in Thermal Stress and Strain in Microelectronics Packaging, Ed. J. H. Lau, Van Nostrand, (1993), pp. 329-359.

Cheng, W., Cheng, H. S., Keer, L. M. and Ai, X, "Surface Crack Initiation under Contact Fatigue: Experimental Observation and Contact Analysis," Journal of Tribology, Vol. 115, (1993), pp. 658-665.

32

1994

Hanson, M. T., Keer, L. M. and Xu, Y., "Stress Analysis for a Three-Dimensional Wedge under Body Force or Surface Loading," Quarterly Journal of Mechanics and Applied Mathematics, Vol. 47, (1994), pp. 141-158.

Lin, W., Keer, L. M. and Xu, Y., "Surface and Body Waves Generated by a Point Traction Applied on Transversely Isotropic Solids," Journal of the Acoustical Society of America, Vol. 95, (1994), pp. 3324-3331.

Cheng, W., Cheng, H. S. and Keer, L. M., "Experimental Investigation on Rolling/Sliding Contact Fatigue Crack Initiation with Artificial Defects," Tribology Transactions, Vol. 37, (1994), pp. 1-12.

Cheng, W., Cheng, H. S. and Keer, L. M., "Longitudinal Crack Initiation Under Pure Rolling Contact Fatigue," Tribology Transactions, Vol. 37, (1994), pp. 51-58.

Fan, H. and Keer, L. M., "Two-Dimensional Contact on an Anisotropic Elastic Half-Space" Journal of Applied Mechanics, Vol. 61, (1994), pp. 250-255.

Wijeyewickrema, A. and Keer, L. M., "Axial Decay of Stresses in a Layered Composite with Slipping Interfaces," Composites Engineering, Vol. 4, (1994) , pp. 895-899.

Xu, Y. and Keer, L. M., "Analysis of Crack Moving and Curving in Anisotropic Solids," International Journal of Solids Structures, Vol. 31, (1994), pp. 3475-3491.

Jeykumaran, M. and Keer, L. M., "Curved Slip Zones in an Elastic Half-Plane," Bulletin of the Seismological Society of America, Vol. 84, (1994), pp. 1903-1915.

1995

Wijeyewickrema, A. and Keer, L. M., "Critical Speeds and Buckling Loads of a Pretwisted Rotor," Journal of Sound and Vibration, Vol. 179, (1995), pp. 109-129.

Hanson, M. T. and Keer, L. M., "Mechanics of Edge Effects on Frictionless Contacts," International Journal of Solids and Structures, Vol. 32, (1995), pp. 391-405

Polonsky, I. A. and Keer, L. M., "On White Etching Band Formation in Rolling Bearings," Journal of the Mechanics and Physics of Solids, Vol. 43, (1995), pp. 637-669.

Wijeyewickrema, A. C., Keer, L. M. and Ehmann, K. F., "Drill Wandering Motion: Experiment and Analysis," International Journal of Mechanical Science, Vol. 37, (1995), pp. 495-509.

Yu, Maria M.-H., Moran, B., and Keer, L. M., "A Direct Analysis of Three-Dimensional Elastic-Plastic Rolling Contact," Journal of Tribology, Vol. 117, (1995), pp. 234-243.

33

Kuo, C. H. and Keer, L. M., "Three-Dimensional Analysis of Cracking in a Multilayered Composite," Journal of Applied Mechanics, Vol. 62, (1995), pp. 273-281.

Wijeyewickrema, A. C., Dundurs, J. and Keer, L. M., "The Singular Stress Field of a Crack Terminating at a Fictional Interface Between Two Materials," Journal of Applied Mechanics, Vol. 62, (1995), pp. 289-293.

Colgate, J.E., Chang, C.-T., Chiou, Y.-C., Liu, W.K., and Keer, L.M., "Modelling of a Hydraulic Engine Mount Focusing on Response to Sinusoidal and Composite Excitations," Journal of Sound and Vibration, Vol. 184, (1995), pp. 503-528.

Homulka, T.A. and Keer, L.M., "A Mathematical Solution of a Special Mixed-Boundary-value Problem of Anisotropic Elasticity," Quarterly Journal of Mechanics and Applied Mathematics, Vol. 48, (1995), pp. 635-658.

Kuo, C.H., Keer, L.M. and Cordes, R.D., "A Note on the Line Spring Solution for a Part-Through Crack," International Journal of Fracture, Vol. 72, (1995), pp. 191-195.

1996

Thomsen, N.B., Stump, D.M. and Keer, L.M, "Surface Uplift and Wear Implications of Zirconia Toughened Ceramics," International Journal of Mechanical Sciences, Vol. 38, (1996), pp, 233-245.

Yu, C.C., Keer, L.M. and Moran, B., "Elastic Plastic Rolling Sliding Contact on a Quarter Space" Wear, Vol. 191, (1996), pp. 219-225.

Yu, C.C., Moran, B. and and Keer, L.M., "A Simplified Direct Method for Cyclic Strain Calculation: Repeated Rolling/Sliding Contact," Journal of Tribology, Vol. 118, (1996), pp. 329-334.

Polonsky, I.A and Keer, L.M., "Scale Effects of Elastic-Plastic Behavior of Microscopic Asperity Contacts," Journal of Tribology, Vol. 118, (1996), pp. 335-340.

Yu, C.C. and Keer, L.M., "Edge Effect on Elastic-Plastic Rolling/sliding Contacts," Computational Mechanics, Vol. 18, (1996), pp. 259-268.

Polonsky, I.A. and Keer, L.M., "Simulation of Microscopic Elastic-Plastic Contacts by Using Discrete Dislocations," Proceedings of the Royal Society of London, Vol. 452A, (1996), pp. 2173-2194.

1997

Y. Xu, L. M. Keer and V. K. Luk, "Stress Properties at the Tip of a Conical Notch," Int. J. Solids and Structures, Vol. 34, (1997), pp. 1479-1491.

Y. Xu, L. M. Keer and V. K. Luk, "Elastic-Cracked Model for Penetration into Unreinforced concrete Targets with Ogival Nose Projectiles," Int. J. Solids and Structures, Vol. 34, (1997), pp. 1479-1491.

34

Kuo, C.H., Keer, L.M. and Bujold, M.P., "Effects of Multiple Cracking on Crack Growth and Coalescence in Contact Fatigue," Journal of Tribology, Vol. 119, (1997), pp. 385-390.

Polonsky, I.A., Chang, T.P., Keer, L.M. and Sproul, W.D., “An Analysis of the Effect of Hard Coatings on Near-Surface Rolling Contact Fatigue Initiation Induced by Surface Roughness,” Wear, Vol. 208, (1997) pp. 204-219.

Mavoori, H., Chin, J., Vaynman, S., Moran, B., Keer, L.M. and Fine, M.E., “Creep, Stress Relaxation, and Plastic Deformation in Sn-Ag and Sn-Zn Eutectic Solders,” Journal of Electronic Materials, Vol. 26, (1997) pp. 783-790.

Yu, C.-C., Keer, L. M. and Steele, R.K., “Three-Dimensional Residual Stress Effects on the Fatigue Crack Initiation in Rails,” Journal of Tribology, Vol. 119, (1997), pp. 660-667.

Sakae, C. and Keer, L.M., “Application of Direct Method for a Nonlinear Kinematic Hardening Material Under Rolling/Sliding Line Contact: Constant Ratcheting Rate,” Journal of the Mechanics and Physics of Solids, Vol. 45, (1997), pp. 1577-1594.

1998

Keer, L.M., Xu, Y. and Luk, V.K., “Analysis of High Speed Axially Symmetric Cutting for Stripping Peripheral Coating,” Journal of Manufacturing Science and Engineering, Vol. 120, (1998), pp. 185-191.

Polonsky, I. A., Chang, T. P., Keer, L. M. and Sproul, W. D., "A Study of Rolling Contact Fatigue of Bearing Steel Coated with PVD TiN Films: Coating Response To Cyclic Contact Stress and Physical Mechanisms Underlying Coating Effect on the Fatigue Life", Wear, Vol. 215, (1998), pp. 191–204.

Chekina, O.G., Keer, L.M. and Liang, H., “Wear-Contact Problems and Modeling of Chemical Mechanical Polishing,” Journal of the Electrochemical Society, Vol. 145, (1998), pp. 2100-2106.

Keer, L.M., Xu, Y. and Luk, V.K., “Boundary Effects in Penetration or Perforation,” Journal of Applied Mechanics, Vol. 65, (1998), pp. 489-496.

Sakae, C. and Keer, L.M., “The Effect of a Layer on a 3D Crack within the Substrate of a Layer/Substrate System,” Mathematics and Mechanics of Solids, Vol. 3, (1998), pp. 433-446.

Wu, M., Sakae, C. and Keer, L.M., “Modeling of Crustal Layering Using Three-Dimensional Analyhsis of Stress-Drop Slip Zones in an Elastic Layer/Half-Space System,” Bulletin of the Seismological society of America, Vol. 88, (1998), pp. 1572-1579.

1999

Chekina, O.G. and Keer, L.M., “A New Approach to Calculation of Contact Characteristics,” Journal of Tribology, Vol. 121, (1999), pp. 20-27.

35

Polonsky, I.A. and Keer, L.M., "A Numerical Method for Solving Rough Contact Problems Based on the Multi-level Multi-summation and Conjugate Gradient Techniques," Wear, Vol. 231, (1999) pp, 206-219.

Stolkarts, V., Keer, L.M. and Fine, M.E., "Damage Evolution Governed by Microcrack Nucleation with Application to the Fatigue of 63Sn-37Pb Solder," Journal of the Mechanics and Physics of Solids, Vol. 47, (1999), pp. 2451-2468.

M.E.Fine, V. Stolkarts and Keer, L.M., "Fatigue Crack Nucleation Assisted by Thermal Activation," Materials Science and Engineering, A272 (1999), pp. 5-9.

2000

Polonsky, I.A. and Keer, LM. “A Fast and Accurate Method for Numerical Analysis of Elastic Layered Contacts” Journal Of Tribology, Vol. 122, (2000), pp. 30-35.

Polonsky, I.A. and Keer, LM. “Fast Methods for Solving Rough Contact Problems: A Comparative Study” Journal Of Tribology, Vol. 122, (2000), pp. 36-41.

Rodgers, M.J., Wen, S., and Keer, L.M., “Surface Displacements and Energy Release Rates for Constant Stress Drop Slip Zones in Joined Elastic Quarter Spaces,” Journal of Geophysical Research, Vol. 105, (2000), pp. 19,111-19,119.

2001

Liu, S., Rodgers, M.J, Wang Q., Keer, L.M., “A Fast and Effective Method for Transient Thermoelastic Displacement Analyses,” Journal of Tribology, Vol. 123, (2001), pp. 479-485.

Zenzri, H. and Keer, L.M. "Mechanical Analysis of the Emplacement of Laccoliths and Lopoliths," Journal of Geophysical Research, Vol. 106, (2001), pp. 13,781-13,792.

Polonsky, I.A. and Keer, L.M., “Stress Analysis of Layered Elastic Solids with Cracks Using the Fast Fourier Transform and Conjugate Gradient Techniques,” Journal of Applied Mechanics, Vol., 68, (2001), pp. 708-714.

Wen, S., Keer, L.M. and Mavoori, H., “Constitutive and Damage Model for a Lead-Free Solder,” Journal of Electronic Materials, Vol. 30, (2001), pp. 1190-1196.

Stolkarts, V., Keer, L.M. and Fine, M.E., “Constitutive and Cyclic Damage Model of 63Sn-37Pb Solder,” Journal of Electronic Packaging, Vol. 123 (2001) pp. 351-355.

Chen, Yu-Hsia, Lee, Kitty, Chiou, Wen-An, Chung, Yip-Wah, and Keer, L.M.,”Synthesis and Strkucture of Smooth, Superhard TiN/SiNx Multilayer Coatings with an Equiaxed Microstructure,” Surface and Coatings Technology, Vol. 146-147, (2001) pp. 209-214.

36

2002

Wen, S, and Keer, L.M., “A Theory of Fatigue: A Physical Approach with Application to Lead-Rich Solder,” Journal of Applied Mechanics, Vol. 69 (2002) pp. 1-9.

Polonsky, I.A. and Keer, L.M., Numerical Analysis of the Effect of Coating Microstructure on Three-Dimensional Crack Propagation of the Coating Under Rolling Contact Fatigue Conditions,” Journal of Tribology, Vol. 124, (2002) pp. 14-19.

Wen, S. Keer, L.M., Vaynman, S. and Lawson, L.R., “A Constitutive Model for a High Lead Solder,” IEEE Transactions on Components and Packaging Technologies, Vol. 25, (2002), pp. 23-31.

Chen, Y.-H., Polonsky, I.A., Chung, Y.-W. and Keer, L.M., “Tribological Properties and Rolling-Contact-Fatigue Lives of TiN/SiNx Multilayer Coatings,” Surface and Coatings Technology, Vol. 154 (2002), pp. 152-161.

Chen, Y.-H., Guruz, M., Chung, Y.-W. and Keer, L.M., “Thermal Stability of Hard TiN/SiNx Coatings with an Equiaxed Microstructure,” Surface and Coatings Technology, Vol. 154 (2002), pp. 162-166.

Korach, C.S. and Keer, L.M., “Stresses between 3D Fractures in Infinite and Layered Elastic Solids,” Engineering Fracture Mechanics, Vol. 69, (2002), pp. 1815-1825.

Wang, Q.J., Bryant, M.D., Keer, L.M. and Salant, R., “Virtual Tribology: Integrating Model-Based Simulations with Modern Computation/Information Technologies,” Computer Modeling in Engineering & Sciences, Vol. 3, (2002), pp. 417-430.

Liu, S. Rodgers, M.J., Wang Q.J., Keer, L.M. and Cheng, H.S., Temperature Distributions and Thermoelastic Displacements in Moving Bodies,” Computer Modeling in Engineering & Sciences, Vol. 3, (2002), pp. 465-482.

Rodgers, M.J., Keer, L.M. and Cheng, H.S., “Steady-State Temperature Rise in Coated Halfspaces and Halfplanes,” Computer Modeling in Engineering & Sciences, Vol. 3, (2002), pp. 483-496.

Borodich, F.M., Harris, S.J. and Keer, L.M., “Self-similarity in Abrasion of Metals by Nanosharp Asperities of Hard Carbon-containing Films,” Applied Physics Letters, Vol. 81, (2002) pp. 3476-3478.

2003

Borodich, F.M., Keer, L.M., and Harris, S.J., “Self-Similarity in Abrasiveness of Hard Carbon-Containing Coatings,” Journal of Tribology, Vol, 125 (2003) pp. 1-7.

Cheng, H.S., Chung, Y.-W., Keer, L.M. Wang, Q. and Zhu, D., “Tribology” in McGraw-Hill Yearbook of Science & Technology 2003 McGraw-Hill, (2003) pp. 438-439.

37

Epstein, D., Yu, T., Wang, Q.J., Keer, L.M., Cheng, H.S., Liu, S., Harris, S.J., and Gangopadhyay, A., “An Efficient Method of Analyzing the Effect of Roughness on Fatigue Life in Mixed-EHL Contact,” Tribology Transactions, Vol. 46, (2003) pp. 273-281.

Epstein, D., Keer, L.M., Wang, Q.J., Chang, H.S., and Zhu, Dong, “Effect of Surface Topography on Contact Fatigue in Mixed Lubrication,” Tribology Transactions, Vol. 46, (2003), pp. 506-513.

2004

Borodich, F.M. Keer, L.M., and Korach, C.S., “Analytical Study of Fundamental Nanoindentation Test Relations for Indenters of Non-ideal Shapes,” Nanotechnology, Vol. 14, (2004), pp 803-808.

Borodich, F.M. and Keer, L.M., “Evaluation of Elastic Modulus of Materials by Adhesive (no-slip) Nano-indentation,” Proceedings of the Royal Society, Vol. 460, (2004), pp. 507-514.

Borodich, F.M., Harris, S.J., Keer, L.M. and Cooper, C.V., “Wear and Abrasiveness of Hard Carbon-containing Coatings under Variation of the Load,” Surface and Coatings Technology, Vol. 179, (2004), pp. 78-82.

Lee, K.W., Chen, Y.-H., Chung, Y.-W., Keer, L.M., “Hardness, Internal Stress and Thermal Stability of TiB2/TiC Coatings Synthesized by Magnetron Sputtering with and without Substrate Rotation,” Surface and Coating Technology, Vol. 177-178, (2004), pp. 591-596.

Borodich, F.M. and Keer, L.M., “Contact Problems and Depth-Sensing Nanoindentation for Frictionless and Frictional Boundary Conditions,” International Journal of Solids and Structures, Vol. 41, (2004), pp. 2479-2499.

Rodgers, M.J., Liu, S., Wang, Q., and Keer, L.M., “Boundary Element Methods for Steady-State Thermal-Mechanical Problems of Counterformal Contact,” Journal of Tribology, Vol. 126, (2004), pp. 443-449.

El-Borgi, S., Keer, L.M., Ben Said, W., “An Embedded Crack in a Functionally Graded Coating Bonded to a Homogeneous Substrate under Frictional Hertzian Contact,” Wear, Vol. 257, (2004), pp. 760-776.

Liu, S., Lannou, S., Wang, Q., and Keer, L.M., “Solutions for Temperature Rise in Stationary/Moving Bodies Caused by Surface Heating with Surface Convection,” Journal of Heat Transfer, Vol. 126, (2004), pp. 776-785.

Wang, F., Keer, L.M., Vaynman, S., and Wen, S., “Constitutive Model and Numerical Analysis for High Lead Solders,” IEEE Transactions on Components and Packaging Technologies, Vol. 27, (2004), pp. 718-723.

2005

38

Jin, X., Keer, L.M. and Wang, Q., “A 3D EHL Simulation of CMP,” Journal of the Electrochemical Society, Vol. 152, (2005), pp. G7-G15.

Borodich, F.M. and Keer, L.M., “Modeling Effects of Gas Adsorption and Removal on Friction During Sliding along Diamond-like Carbon Films,” Thin Solid Films, Vol. 476/1, (2005), pp. 108-117.

Boucly, V., Nelias, D., Liu, S., Wang, Q.J. and Keer, L.M., “ Contact Analysis for Bodies with Frictional Heating and Plastic Behavior,” Journal of Tribology, Vol. 127, (2005), pp. 355-364.

Liu, S.B. Peyronnel, A., Wang, Q.J., and Keer, L.M., “An Extension of the Hertz Theory for Three Dimensional Coated Bodies,” Tribology Letters, Vol. 18, (2005) pp. 303-314.

Liu, S.B. Peyronnel, A., Wang, Q.J., and Keer, L.M., “An Extension of the Hertz Theory for 2DCoated Components,” Tribology Letters, Vol. 18, (2005) pp. 505-511.

Wang, F. and Keer, L.M., “Numerical Simulaiton for Three Dimensional Elastic-Plastic Contact With Hardening Behavior,” Journal of Tribology, Vol. 127, (2005), pp. 494-502

2006

Borodich, F.M., Korach, C.S. and Keer, L.M., “Modeling the Tribochemical Aspects of Friction and Gradual Wear of DLC Films,” in Nanomechanics of Materials (Ed. T.J. Chuang, et. al), Springer, (2006), pp, 299-308.

Jin, X., Keer, LM, “Solution of Multiple Edge Cracks in an Elastic Half Plane,” International Journal of Fracture, Vol. 137, (2006), pp. 121 – 137.

Martini, A., Escoffier, B., Wang, Q., Liu, S.B., Keer, L.M., Zhu, D., and Bujold, M., “Prediction of Subsurface Stress in Elastic Perfectly Plastic Rough Components,” Tribology Letters, (2006), Vol. 23, pp. 243-251.

2007

Jin, X., Keer, L.M., and Chez, E.L., “Numerical Simulation of Growth Pattern of a Flluid-filled Subsurface Crack under Moving Hertzian Loading,” International Journal of Fracture (2007), published online 11/1/07.

Borodich, F.M., Korach, C.S. and Keer, L.M., “Modeling the Tribochemical Aspects of Friction and Gradual Wear of Diamond-Like Carbon Films,” Journal of Applied Mechanics (2007), Vol. 74, pp. 23-30.

Block, J.M. and Keer, L.M., “Partial Plane Contact of an Elastic Curved Beam Pressed by a Flat Surface,” Journal of Tribology, Vol 129, (2007), pp. 60-64.

39

Martini, A., Velter, G., Keer, L.M., and Wang, Q.J., “Enhancement of a Simplified Model for Maximum Stress Prediction,” Tribology Letters, (2007) Vol. 27, pp. 61-67. (Published online 3/16/07).

Jin, X., Keer, LM. and Wang, Q.J., “A Practical Method for Singular Integral Equations of the Second Kind,” Engineering Fracture Mechanics, (Published online May, 2007), in press.

Hao, S. and L.M. Keer, ”Rolling Contact Between Rigid Cylinder and Semi-Infinite Elastic Body with Sliding and Adhesion,” Journal of Tribology, Vol. 129, (2007), pp. 481-494.

40